Philips S5070/65 Manual de utilizare

series S5000

1

S5000 series

ENGLISH 4

БЪЛГАРСКИ 39

ČEŠTINA 78

EESTI 113

HRVATSKI 147

MAGYAR 183

ҚАЗАҚША 218

LIETUVIŠKAI 255

LATVIEŠU 291

МАКЕДОНСКИ 326

POLSKI 365

ROMÂNĂ 402

РУССКИЙ 437

SLOVENSKY 475

SLOVENŠČINA 511

SHQIP 545

SRPSKI 581

УКРАЇНСЬКА 616

4

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benet from the support that Philips

offers, register your product at

www.philips.com/welcome.

General description (Fig. 1)

1 Protection cap for cleansing brush attachment

(specic types only)

2 Click-on cleansing brush attachment

(specic types only)

3 Comb for beard styler attachment

(specic types only)

4

Click-on beard styler attachment (specic types only)

5 Click-on trimmer attachment (specic types only)

6 Protection cap for shaving unit (specic types only)

7 Click-on shaving unit

8 On/off button

9 Turbo button (specic types only)

10 Handle

11 Socket for small plug

12 Battery charge indicator with 1 light

13 Battery charge indicator with 3 lights

14 Unplug for use symbol

15 Travel lock symbol

16 Replacement reminder

17 Cleaning reminder

18 Cleaning cartridge for SmartClean system

19 SmartClean system (specic types only)

20 Cap of SmartClean system

21 On/off button

22 Battery symbol

23 Cleaning symbol

24 Replacement symbol

25 Ready symbol

ENGLISH

26 Adapter

27 Small plug

28 Pouch (specic types only)

Note: The accessories supplied may vary for different

products. The box shows the accessories that have been

supplied with your appliance.

Important safety information

Read this important information carefully before you

use the appliance and its accessories and save it for

future reference. The accessories supplied may vary

for different products.

Danger

- Keep the adapter dry.

Warning

- The adapter contains a transformer. Do not cut

off the adapter to replace it with another plug, as

this causes a hazardous situation.

- This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack

of experience and knowledge if they have been

given supervision or instruction concerning use

of the appliance in a safe way and understand the

hazards involved. Children shall not play with

the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

- Always unplug the shaver before you clean it

under the tap.

- Always check the appliance before you use it.

Do not use the appliance if it is damaged, as this

may cause injury. Always replace a damaged part

with one of the original type.

ENGLISH 5

Caution

- Never immerse the cleaning system or the

charging stand in water and do not rinse it

under the tap.

- Never use water hotter than 80°C to rinse

the shaver.

- Only use this appliance for its intended purpose

as shown in the user manual.

- For hygienic reasons, the appliance should only

be used by one person.

- Do not use the adapter in or near wall sockets

that contain or have contained an electric air

freshener to prevent irreparable damage to the

adapter.

- Never use compressed air, scouring pads, abrasive

cleaning agents or aggressive liquids such as petrol

or acetone to clean the appliance.

- If your shaver comes with a cleaning system,

always use the original Philips cleaning uid

(cartridge or bottle, depending on the type of

cleaning system).

- Always place the cleaning system on a stable,

level and horizontal surface to prevent leakage.

- If your cleaning system uses a cleaning cartridge,

always make sure that the cartridge compartment

is closed before you use the cleaning system to

clean or charge the shaver.

- When the cleaning system is ready for use, do not

move it to prevent leakage of cleaning uid.

- Water may drip from the socket at the bottom

of the shaver when you rinse it. This is normal

and not dangerous because all electronics are

enclosed in a sealed power unit inside the shaver.

ENGLISH6

Electromagnetic elds (EMF)

- This Philips appliance complies with all applicable

standards and regulations regarding exposure

to electromagnetic elds.

General

- This shaver is waterproof. It is suitable for use in

the bath or shower and for cleaning under the tap.

For safety reasons, the shaver can therefore only

be used without cord.

- The appliance is suitable for mains voltages ranging

from 100 to 240 volts.

- The adapter transforms 100-240 volts to a safe

low voltage of less than 24 volts.

- Maximum noise level: Lc = 69dB(A)

The display

Charging

Battery charge indicator with 3 lights

- Charging takes approx. 1 hour

- Quick charge: When the appliance is connected

to the mains, the lights of the battery charge

indicator light up one after the other continuously.

When the appliance contains enough energy for

one shave, the bottom light of the battery charge

indicator ashes slowly.

- If you leave the appliance connected to the mains,

the charging process continues. To indicate that

the appliance is charging, rst the bottom light

ashes and then lights up continuously. Then the

second light ashes and then lights up continuously,

and so on until the appliance is

fully charged.

ENGLISH 7

Battery charge indicator with 1 light

- Charging takes approx. 1 hour.

- Quick charge: When the appliance does not

contain enough energy for one shave, the battery

charge indicator ashes quickly. When the

battery charge indicator starts ashing slowly, the

appliance contains enough energy for one shave .

- If you leave the appliance connected to the mains,

the charging process continues. To indicate that

the appliance is charging, the battery charge

indicator ashes slowly.

Battery fully charged

Note: This appliance can only be used without cord.

Note: When the battery is full, the display switches

off automatically after 30 minutes. If you press the

on/off button during charging, the ‘unplug for use’

symbol ashes white to remind you that you have

to disconnect the appliance from the mains.

When the battery is fully charged, all lights of the

battery charge indicator light up continuously.

- Battery charge indicator with 3 lights

- Battery charge indicator with 1 light

ENGLISH8

Battery low

When the battery is almost empty, the battery

charge indicator ashes orange.

- Battery charge indicator with 3 lights

- Battery charge indicator with 1 light

Remaining battery capacity

Battery charge indicator with 3 lights

- The remaining battery capacity is indicated by the

lights of the battery charge indicator that light up

continuously.

‘Unplug for use’ reminder

- The appliance is equipped with an ‘unplug for use’

reminder. The ‘unplug for use’ symbol starts to

ash to remind you that you have to disconnect

the appliance from the adapter before you can

switch it on.

ENGLISH 9

Cleaning reminder

For optimal shaving performance, we advise you to

clean the shaver after every use.

- When you switch off the shaver, the cleaning

reminder ashes to remind you to clean the

shaver.

Travel lock

You can lock the shaver when you are going to

travel. The travel lock prevents the shaver from being

switched on by accident.

Activating the travel lock

1 Press the on/off button for 3 seconds to enter

the travel lock mode.

- While you activate the travel lock, the travel lock

symbol lights up continuously. When the travel

lock is activated, the travel lock symbol ashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

- The travel lock symbol ashes and then lights up

continuously.

The shaver is now ready for use again.

3 sec.

ENGLISH10

Replacing shaving heads

For maximum shaving performance, we advise you

to replace the shaving heads every two years.

- The appliance is equipped with a replacement

reminder which reminds you to replace the

shaving heads. The replacement reminder lights up

continuously.

Note: After replacing the shaving heads, you need to

reset the replacement reminder by pressing the on/off

button for 7 seconds.

Turbo setting (specic types only)

The appliance is equipped with a Turbo or Turbo+

setting. This setting is intended for quicker and more

intense shaving and makes hard-to-reach areas easier

to shave.

Activating the Turbo setting

1 To activate the Turbo setting, press the Turbo

button once.

Deactivating the Turbo setting

1 To deactivate the Turbo setting, simply press

the Turbo button once again.

Charging

Charging takes approx. 1 hour.

Note: This appliance can only be used without cord.

Charge the shaver before you use it for the rst

time and when the display indicates that the battery

is almost empty.

ENGLISH 11

Charging with the adapter

1 Insert the small plug into the appliance

and put the adapter in the wall socket.

Charging in the SmartClean system

(specic types only)

1 Put the small plug in the SmartClean system.

2 Put the adapter in the wall socket.

3 Press down the top cap to be able to place the

shaver in the holder (‘click’).

4 Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean system.

5 Place the shaver in the holder, tilt the shaver

backwards and press down the top cap to

connect the shaver (‘click’).

- The battery symbol ashes slowly to indicate the

shaver is charging.

ENGLISH12

Using the shaver

Switching the appliance on and off

1 To switch on the appliance, press the on/off

button once.

2 To switch off the appliance, press the on/off

button once.

- Battery charge indicator with 3 lights: The display

lights up for a few seconds to show the remaining

battery status.

Shaving

Skin adaptation period

Your rst shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system.

We advise you to shave regularly (at least 3 times

a week) with this shaver for a period of 3 weeks to

allow your skin to adapt to the new shaver.

Note: This appliance can only be used without a cord.

1 Switch on the appliance.

2 Move the shaving heads over your skin in

circular movements.

Note: Do not make straight movements.

3 Clean the shaver after use (see chapter

‘Cleaning and maintenance’).

Wet shaving

You can also use this shaver in the shower or

on a wet face with shaving foam or shaving gel.

ENGLISH 13

To shave with shaving foam or shaving gel, follow the

steps below:

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over

your skin.

4 Switch on the shaver.

5 Move the shaving heads over your skin in

circular movements.

Note: Rinse the shaver under the tap regularly to ensure

that it continues to glide smoothly over your skin.

6 Dry your face and thoroughly clean the

shaver after use (see chapter ‘Cleaning

and maintenance’).

Note: Make sure you rinse all foam or shaving gel

off the shaver.

ENGLISH14

Turbo setting (specic types only)

The appliance is equipped with a Turbo or Turbo+

setting for easy shaving of hard-to reach areas.

1 Switch on the shaver.

2 Press the Turbo button once to switch on

the Turbo setting if you want to shave

hard-to-reach areas more quickly.

3 Move the shaving heads over your skin in

circular movements.

Note: Do not make straight movements.

4 To deactivate the Turbo setting simply press

the Turbo button once.

Using the click-on attachments

Note: The accessories supplied may vary for different

products. The box shows the accessories that have been

supplied with your appliance.

Removing or attaching the click-on

attachments

1 Make sure the appliance is switched off.

2 Pull the attachment straight off the appliance.

Note: Do not twist the attachment while you pull it off

the appliance.

3 Insert the lug of the attachment into the slot in

the top of the appliance. Then press down the

attachment to attach it to the appliance (‘click’).

ENGLISH 15

Using the trimmer attachment

You can use the trimmer attachment to groom

your sideburns and moustache.

1 Make sure the appliance is switched off.

2 Insert the lug of the attachment into the slot

in the top of the shaver. Then press down

the trimmer attachment to attach it to the

appliance (‘click’).

3 Switch on the appliance.

4 You can now start trimming.

5 Clean the attachment after use (see chapter

‘Cleaning and maintenance’).

Using the beard styler attachment

1 Make sure the appliance is switched off.

2 Insert the lug of the attachment into the slot in

the top of the appliance. Then press down the

attachment to attach it to the appliance (‘click’).

Using the beard styler attachment with comb

You can use the beard styler attachment with the

comb attached to style your beard at one xed

setting, but also at different length settings. You can

use it also to pre-trim any long hairs before shaving

to have a more comfortable shave.

The hair length settings on the beard styler

attachment correspond to the remaining hair length

after cutting and range from 1 to 5mm.

1 Slide the comb straight into the guiding grooves

on both sides of the attachment (‘click’).

ENGLISH16

2 Press the length selector and then push it

to the left or right to select the desired hair

length setting.

3 Switch on the appliance.

4 You can now start styling your beard by

moving the attachment upwards with

gentle pressure making sure the front of

the comb is in full contact with the skin.

5 Clean the attachment after use (see chapter

‘Cleaning and maintenance’).

Using the beard styler attachment without

comb

You can use the beard styler attachment without the

comb to contour your beard, moustache, sideburns

or neckline to a length of 0.5mm.

1 Pull the comb off the attachment.

Note: Grab the comb in the centre to pull it off the

attachment. Do not pull at the sides of the comb.

2 Switch on the appliance.

3 You can now start contouring your beard,

moustache, sideburns or neckline by moving

the styler downwards with gentle pressure

while holding it perpendicular to the skin.

4 Clean the attachment after use (see chapter

‘Cleaning and maintenance’).

2

1

ENGLISH 17

Using the cleansing brush attachment

Use the rotating cleansing brush attachment

with your daily cleansing cream. The cleansing

brush attachment removes oil and dirt, contributing

to a healthy and oil-free skin.

1 Insert the lug of the attachment into the

slot in the top of the appliance. Then press

down the attachment to attach it to the

appliance (‘click’).

2 Moisten the attachment with water.

Do not use the appliance with a dry

brush head, as this can irritate the skin.

Tip: Use the attachment before shaving for easier

shaving and a more hygienic shaving result.

3 Moisten your face with water and apply

a cleanser to your face.

4 Place the attachment on your right cheek.

5 Switch on the appliance.

6 Gently move the attachment across your skin

from the nose towards the ear. Do not push

the attachment too hard onto the skin to make

sure the treatment remains comfortable.

7 After approx. 20 seconds you can move

the attachment to your left cheek and start

cleansing this part of your face.

20 sec.

ENGLISH18

Caution: Do not clean the sensitive area around

your eyes.

8 After approx. 20 seconds you can move

the attachment to your forehead and start

cleansing this part of your face. Gently move

the attachment from left to right.

Note: We advise you to not overdo the cleansing

and to not cleanse any zone longer than 20 seconds.

9 After the treatment, rinse and dry your face.

Your face is now ready for the next step of

your daily skincare routine.

10 Clean the attachment after use

(see chapter ‘Cleaning and maintenance’).

Cleaning and maintenance

Note: The accessories supplied may vary for different

products. The box shows the accessories that have been

supplied with your appliance.

Cleaning the shaver in the SmartClean

system (specic types only)

Do not tilt the SmartClean system to prevent

leakage.

Note: Hold the SmartClean system while you prepare

it for use.

Note: If you clean the shaver in the SmartClean

system once a week, the SmartClean cartridge will last

approximately three months.

20 sec.

ENGLISH 19

Preparing the SmartClean system for use

1 Put the small plug in the back of the

SmartClean system.

2 Put the adapter in the wall socket.

3 Press the button on the side of the SmartClean

system and lift the top part of the SmartClean

system.

4 Pull the seal off the cleaning cartridge.

5 Place the cleaning cartridge in the

SmartClean system.

6 Push the top part of the SmartClean system

back down (‘click’).

Using the SmartClean system

Always make sure to shake excess water off the

shaver before you place it in the SmartClean system.

1

2

ENGLISH20

Pagina se încarcă ...

Philips S5070/65 Manual de utilizare

Philips S5070/65 Manual de utilizare

în alte limbi

Lucrări conexe