IP-COM IP-COM G5328P-24-410W L3 Managed PoE Switch Ghid de instalare

Categorie
Comutatoare de rețea
Tip
Ghid de instalare

Acest manual este potrivit și pentru

L3 Managed PoE Switch
G5328P-24-410W/G5310P-8-150W
1.1 Safety precautions 1.3 Installation
1.2 Preparing for installation
Package contents
Follow the notes below to avoid device damages or personal injuries caused by improper operations. Mounting to a standard 19-inch rack
This guide instructs how to install, connect and log in to the device with the example of
G5328P-24-410W. For details, please visit www.ip-com.com.cn to download the user
guide of the device.
Switch x 1 Power cord x 1 L-shaped bracket x 2
Screw (KM3*8 mm) x 8 Footpad x 4 Quick installation guide x 1
Console cable x 1 (only provided with G5328P-24-410W)
Quick Installation Guide
Chapter 1 Device installation
Refer to the following network topology to connect the switch to other network devices.
After connection, please check whether the switch is connected properly or adjust the operating mode of
the switch according to the following table.
Chapter 2 Physical connection
Chapter 3 Login
1. I cannot log in to the web UI of the switch. What should I do?
FAQ
CE Mark Warning
RECYCLING
Technical Support
Copyright
©2022 IP-COM Networks Co., Ltd. All rights reserved.
This documentation (including pictures, images, and product specifications, etc.) is for reference only.
To improve internal design, operational function, and/or reliability, IP-COM reserves the right to make
changes to the products described in this document without obligation to notify any person or
organization of such revisions or changes.
IP-COM Networks Co., Ltd.
Address: Room 101, Unit A, First Floor, Tower E3, No.1001, Zhongshanyuan Road,
Nanshan District, Shenzhen, China. 518052
Tel: (86755) 2765 3089
Email: info@ip-com.com.cn
Website: www.ip-com.com.cn
Safety and statement
Internet
Ethernet cable
Grounding
terminal
Grounding cable
Signal surge protector
Switch
Computer
Ethernet cable
Router
Other network
devices
Aggregation switch
This switch
This switch This switch
Mounting on the desktop
Mounting to the wall
There is a void sticker covering one of the screws on the housing of the switch. Do NOT remove the sticker without
permission of the local agent. Otherwise you shall be responsible for any damage.
Note:
- The switches can only be installed on non-flammable walls, such as a concrete wall.
- Do NOT install the switches with ventilation openings facing downward; otherwise, there will be potential safety
hazards.
- The switches are only suitable for mounting at heights ≤ 2 m.
Note:
Tips
G5328P-24-410W
L3 Managed PoE Switch
G5328P-24-410W
L3 Managed PoE Switch
Footpad
G5328P-24-410W
L3 Managed PoE Switch
G5328P-24-410W
L3 Managed PoE Switch
G5328P-24-410W
L3 Managed PoE Switch
G5328P-24-410W
L3 Managed PoE Switch
NVR
G5328P-24-410W
L3 Managed PoE Switch
G5328P-24-410W
L3 Managed PoE Switch
Forget Password
User Name
Password
English
Login
20161610
255 255 255 0
Port
Model G5310P-8-150W G5328P-24-410W
Port RJ45 10/100/1000 Mbps
Port SFP 1000 Mbps
Port consolă
Switching mode
MAC address table learning
MAC address table
PoE standard
Conductor cablu de
alimentare PoE
Port PoE
Dimensiuni (L x l x Î)
Alimentare
PoE
Performanţă
Intrare c.a.
Port RJ45
Sursa de alimentare
Protecţie
împotriva
descărcărilor
electrice
Mediu de operare
Mediu de depozitare
Viteză de transmisie a datelor
Mediu de transmitere
Standarde
Putere maximă per port
Putere maximă totală a
switch-ului
924
1 port SPF independent 4 porturi SPF independente
Store-and-forward
Auto aging, auto learning
16 K
100 - 240 V c.a., 50/60 Hz,
2 A maximum
8 conductori: tensiunea conductorilor 1, 2, 4, 5 este +, iar a
onductorilor 3, 6, 7, 8 este -.
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 x 179.6 x 44 mm
100 - 240 V c.a., 50/60 Hz, 6 A
440 x 284 x 44 mm
Mod obişnuit: 6 KV
Mod obişnuit: 6 KV; Mod diferenţial: 4 KV
IEEE 802.3af şi IEEE 802.3at
Temperatura: 0°C - 40°C
Umiditate: (10% - 90%) umiditate
relativă, fără condens
Temperatura: 0°C - 45°C
Umiditate: (10% - 90%) umiditate
relativă, fără condens
Temperatura: -40°C - 70°C
Umiditate: (5% - 90%) umiditate relativă, fără condens
Ethernet: Cablu CAT3 UTP/STP sau o versiune mai nouă
Fast Ethernet: Cablu CAT5 UTP/STP sau o versiune mai nouă
Ethernet Gigabit: CAT5e sau CAT6 UTP/STP
1000Base-SX: MMF
1000Base-LX: MMF sau SMF
Ethernet: 10 Mbps (semi duplex)/20 Mbps (duplex complet)
Fast Ethernet: 100 Mbps (semi duplex)/200 Mbps (duplex complet)
Ethernet Gigabit: 2000 Mbps (duplex complet)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; Rată Baud: 115200
Wear the ESD bracelet or gloves before installation and do NOT power on the switch before finishing
installation.
Use the included power cord to supply power to the switch.
Make sure that the input voltage matches the value of the switch specified in this guide.
Do NOT block any ventilation openings.
Do NOT remove the housing of the switch.
Keep the operating environment clean, and regularly clean the switch.
Disconnect the switch from the power supply before cleaning it. Do NOT scrub the switch with any liquid.
Position the switch away from power line, electric lamp, or power system.
Do NOT place any heavy item on top of the switch.
If an outdoor cable is required, check whether the signal surge protector and AC surge arrester are
connected to the switch.
Rack mounting: ESD bracelet or gloves, screwdriver, 4 screws (suitable for securing the switch to the rack)
Wall mounting: ESD bracelet or gloves, marker, hammer drill, rubber hammer, 4 expansion bolts (M5*40
mm), screwdriver, 4 screws (PA 5*25 mm, head diameter: 10 mm)
Desktop mounting: ESD bracelet or gloves
Step 1 Ensure that the rack is stable and level, and is properly grounded.
Step 2 Fix the 2 L-shaped brackets to both sides of the switch with the included screws.
Step 3 Mount the switch at a proper height on the rack and fix the L-shaped brackets to the
rack with screws (not included). Ensure that the switch is stable on the rack.
Step 1 Fix the 2 L-shaped brackets (rotated by 90 degrees) to both sides of the switch with the
included screws.
The switch supports auto MDI/MDIX, so both a straight cable and a crossover cable can be used to
connect the switch to Ethernet devices.
Step 4 Secure the screws (self-prepared) passing through the L-brackets into the expansion bolts
with a screwdriver. Ensure that the switch is installed firmly with its RJ45 ports facing
upward.
Step 2 Place the switch horizontally onto the wall with its RJ45 ports facing upward, and then mark
the positions of the screw holes with the marker.
Step 3 Drill holes in the marked positions, and then hammer the expansion bolts into the holes.
Paste the four footpad stickers to the corresponding four recesses on the bottom of the switch.
Then turn the switch upside down, and place it horizontally on a big enough, clean, stable and flat
desktop.
G5328P-24-410W
L3 Managed PoE Switch
1.4 Grounding
Grounding is important for lightning protection, anti-interference, and personal safety.
Grounding terminal
Grounding terminal
Other devices
This switch
Grounding cable
Grounding cable
Grounding bar
Grounding bar
Connect the grounding cable to the grounding system in the equipment room. Do NOT connect it to a fire hose or
lightning rod.
Note:
Step 1 Connect one end of the grounding cable to the grounding terminal of the switch.
Step 2 Connect the other end of the grounding cable to another grounded device or to the binding
post on the grounding bar.
OR
WAN portLAN port
IP camera AP
IP camera AP IP camera AP
If you fail to access the above page, please refer to question 1 in FAQ.
After successfully logging in to the web UI of the switch, you can configure the switch now.
Tips
LED indicator/button
PoE-Max
Description
Solid on: The total output power of the switch reaches the maximum value.
Off: The total output power of the switch does not reach the maximum value.
SYS
Blinking: The system works properly.
Solid on: The system is not working properly.
Off: The system is starting up or not working properly.
Power Solid on: The switch is powered on properly.
Off: The switch is not powered on, or not powered on properly.
Solid on: The port is connected, but no data is being transmitted over the port.
Blinking: Data is being transmitted over the port.
Off: The port is not connected or is not connected properly.
This multipurpose button is for both LED indicator converting and reset.
- Press the LED Mode (or LED/Reset) button to convert the mode of the Link/Act
or PoE LED indicator.
When the Link/Act LED indicator of LED Mode (or LED/Reset) is solid on, the
Link/Act or PoE LED indicator is in the Link/Act mode.
When PoE LED indicator of LED Mode (or LED/Reset) is solid on, the Link/Act
or PoE LED indicator is in the PoE mode.
- When the SYS LED indicator is blinking, press and hold the LED Mode (or
LED/Reset) button for about 10 seconds, and then release when all indicators are
solid on. When the SYS LED indicator blinks again, the switch is restored to factory
settings.
Link/Act or PoE
Link/Act
LED Mode (or LED/Reset)
Link/Act and PoE multipurpose LED indicator. It indicates the connection status or
PoE power supply status of RJ45 ports based on the converted mode of the LED
Mode (or LED/Reset) button.
- When the Link/Act LED indicator of LED Mode (or LED/Reset) is solid on, the
descriptions of the Link/Act or PoE LED indicators are shown as follows:
Solid on: The port is connected to a device, but no data is being transmitted over
the port.
Blinking: Data is being transmitted over the port.
Off: The port is not connected or is not connected properly.
Green light indicates that the negotiation rate of the port is 1000 Mbps, and orange
light indicates a rate of 10 Mbps or 100 Mbps.
- When the PoE LED indicator of LED Mode (or LED/Reset) is solid on, the
descriptions of the Link/Act or PoE LED indicators are shown as follows:
Solid orange: The port supplies PoE power to a device properly.
Blinking orange: The port is not supplying PoE power to a device properly.
Off: The port does not supply PoE power.
Step 1 Use an Ethernet cable to connect the computer to one of the ports 1 - 24 (1 - 9 for
G5310P-8-150W) of the switch.
Step 3 Start a web browser (such as Chrome) on the computer, and enter the default IP
address of the switch (default: 10.16.16.168) in the address bar, and press Enter on the
keyboard.
Step 4 On the login page of the switch, enter the login user name and password (both are
admin by default), and click Login.
Step 2 Set the IP address of the computer to the same network segment of the switchs IP
address. The default IP address of the switch is 10.16.16.168. You can set the IP address of
the computer to 10.16.16.X (X ranges from 2 to 254 excluding 168, and is not occupied) and
the subnet mask to 255.255.255.0.
Try the following solutions:
- Check whether the switch is powered on properly: The Power LED indicator is solid on.
- Check whether the computer is connected to the switch properly.
- Check whether the IP address of Ethernet (or Local Area Connection) of the computer is set to
10.16.16.X (X ranges from 2 to 254 excluding 168, and is not occupied).
- Clear the cache of the web browser or try another web browser.
- Disable the firewall of the computer, or try another computer.
- Check whether only one device with the IP address 10.16.16.168 exists in the local network.
- If the problem persists, reset the switch and try again.
Reset method: When the SYS LED indicator is blinking, press and hold the LED Mode (or
LED/Reset) button for about 10 seconds, and then release when all indicators are solid on. When
the SYS LED indicator blinks again, the switch is restored to factory settings.
Specificaţii Română
Portok
Modell G5310P-8-150W G5328P-24-410W
10/100/1000 Mb/s RJ45 port
1000 Mb/s SFP port
konzol csatlakozó felület
Kapcsolási mód
MAC címtáblázat tanulás
MAC cím táblázat
PoE szabvány
PoE tápkábel erek száma
PoE port
Méretek (H x Sz x M)
PoE tápellátás
Működés
AC bemenet
RJ45 port
Tápellátás
Villámcsapás
védelem
Működési környezet
Tárolási környezet
Átviteli sebesség optimalizálása
Átviteli közeg
Szabványok
Egyetlen port maximális
kimenete
A váltó maximális kimenete
924
1 szabad SFP port 4 szabad SFP port
Tárol és továbbít
Automatikus elhasználódás, öntanulás
16 K
100-240 V váltóáram, 50/60Hz
2 A maximum
8 ér: az 1-es, 2-es, 4-es, 5-ös erek feszültsége + (pozitív);
a 3-as, 6-os, 7-es, 8-as ereké pedig - (negatív).
1 és 8 között 1 és 24 között
30 W
130 W
30 W
370 W
294 mm x 179.6 mm x 44 mm
100-240 V váltóáram,
50/60Hz 6 A
440 mm x 284 mm x 44 mm
Közös üzemmód: 6 kV
Közös üzemmód: 6 kV; Differenciál üzemmód: 4 kV
IEEE 802.3af and IEEE 802.3at
Hőfok: 0°C - 40°C
Páratartalom: 10 - 90% RH, nem
kicsapódó
Hőfok: 0°C - 45°C
Páratartalom: 10 - 90% RH, nem
kicsapódó
Hőfok: -40°C - 70°C
Páratartalom: 5 - 90% RH, nem kicsapódó
Ethernet: CAT3 UTP/STP vagy gyorsabb kábel
Fast Ethernet: CAT5 UTP/STP vagy gyorsabb kábel
Gigabit Ethernet: CAT5e vagy CAT6 UTP/STP
1000Base-SX: MMF
1000Base-LX: MMF vagy SMF
Ethernet: 10 Mb/s (fél duplex)/20 Mb/s (teljes duplex)
Fast Ethernet: 100 Mb/s (fél duplex)/200 Mb/s (teljes duplex)
Gigabit Ethernet: 2000 Mb/s (teljes duplex)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; átviteli sebesség: 115200
Specifikáció ÖzelliklerMagyar Türkçe
Port
Model G5310P-8-150W G5328P-24-410W
Port RJ45 10/100/1000 Mb/s
Port SFP 1000 Mb/s
Port konsoli
Tryb przełączania
Nauka adresu MAC
Tabela adresów MAC
Standard PoE
Rdzeń kabla zasilającego PoE
Port PoE
Wymiary (dł. x szer. x wys.)
System
zasilania PoE
Wydajność
Wejście AC
Port RJ45
Zasilanie
Ochrona przed
piorunami
Środowisko pracy
Środowisko przechowywania
Optymalizacja szybkości transmisji
Środki transmisji
Standardy
Maksymalna moc wyjściowa
pojedynczego portu
Maksymalna moc wyjściowa
przełącznika
924
1 niezależny port SFT 4 niezależne porty SFT
Zapis-i-wprzód
Automatyczna pamięć adresów i chwili rejestracji
16 K
100 - 240V AC, 50/60Hz,
2A max
8 rdzeni: napięcie rdzeni 1, 2, 4, 5 wynosi +, a rdzeni 3, 6, 7, 8 wynosi -.
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 mm x 179.6 mm x 44 mm
100 - 240V AC, 50/60Hz, 6A
440 mm x 284 mm x 44 mm
Tryb wspólny: 6 kV
Tryb wspólny: 6 kV; Tryb różnicowy: 4 kV
IEEE 802.3af, IEEE 802.3at
Temperatura: 0°C - 40°C
Wilgotność: (10–90%) wilgotności
względnej, bez kondensacji
Temperatura: 0°C - 45°C
Wilgotność: (10–90%) wilgotności
względnej, bez kondensacji
Temperatura: -40°C - 70°C
Wilgotność: (5–90%) wilgotności względnej, bez kondensacji
Sieć Ethernet: Kabel CAT3 UTP/STP lub lepszy
Szybka sieć Ethernet: Kabel CAT5 UTP/STP lub lepszy
Gigabitowa sieć Ethernet: Kabel CAT5e lub CAT6 UTP/STP
1000Base-SX: MMF
1000Base-LX: MMF lub SMF
Sieć Ethernet: 10 Mb/s (pół dupleks)/20 Mb/s (pełny dupleks)
Szybka sieć Ethernet: 100 Mb/s (pół dupleks)/200 Mb/s
(pełny dupleks)
Gigabitowa sieć Ethernet: 2000 Mb/s pełny dupleks
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; Prędkość transmisji: 115200
Dane techniczne Polski
Port
Modèle G5310P-8-150W G5328P-24-410W
Port RJ45 10/100/1000 Mbps
Port SFP 1000 Mbps
Port de la console
Mode de commutation
Apprentissage des adresses MAC
Tableau des adresses MAC
Norme PoE
Âmes des câbles
d’alimentation PoE
Port PoE
Dimensions (L x W x H)
Alimentation
électrique PoE
Performance
Entrée AC
Port RJ45
Alimentation électrique
Protection
contre la
foudre
Environnement opérationnel
Environnement de stockage
Taux de transmission des données
Support de transmission
Normes
Sortie maximale d'un port
unique
Sortie maximale du
commutateur
924
1 port SFP indépendant 4 ports SFP indépendants
Stockage et transmission
Auto vieillissement, auto apprentissage
16 K
100 - 240V AC, 50/60Hz,
2A max
8 cœurs : la tension des noyaux 1, 2, 4, 5 est + et celle des
noyaux 3, 6, 7, 8 est -.
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 mm x 179.6 mm x 44 mm
100 - 240V AC, 50/60Hz, 6A
440 mm x 284 mm x 44 mm
Mode commun : 6 kV
Mode commun : 6 kV; Mode différentiel : 4 kV
IEEE 802.3af, IEEE 802.3at
Température : 0°C - 40°C
Humidité : (10%~90%) RH,
non-condensant
Température : 0°C - 45°C
Humidité : (10%~90%) RH,
non-condensant
Température : -40°C - 70°C
Humidité : (5%~90%) RH, non-condenslant
Ethernet: Câble CAT3 UTP/STP ou supérieur
Fast Ethernet: Câble CAT5 UTP/STP ou supérieur
Gigabit Ethernet: Câble CAT5e ou CAT6 UTP/STP
1000Base-SX : MMF
1000Base-LX : MMF ou SMF
Ethernet: 10 Mbps (semi duplex)/20 Mbps (duplex intégral)
Fast Ethernet : 100 Mbps (semi duplex)/200 Mbps (duplex intégral)
Gigabit Ethernet: 2000 Mbps (duplex intégral)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; Débit en Baud: 115200
Spécifications Français
Puerto
Modelo G5310P-8-150W G5328P-24-410W
Puerto RJ45 de 10/100/1000
Mbps
Puerto SFP de 1000 Mbps
Puerto de consola
Modo de conmutación
Aprendizaje de direcciones MAC
Tabla de direcciones MAC
Estándar de PoE
Núcleo del cable de
alimentación PoE
Puerto PoE
Dimensiones (L x An x Al)
Fuente de
alimentación
PoE
Rendimiento
Entrada de CA
Puerto RJ45
Fuente de alimentación
Protección
contra rayos
Entorno de funcionamiento
Entorno de almacenamiento
Velocidad de transmisión de datos
Medios de transmisión
Estándares
Salida máxima de un solo
puerto
Salida máxima del conmutador
924
1 puerto SFP independiente 4 puertos SFP independientes
Almacenar y retransmitir
Vencimiento automático, aprendizaje automático
16 K
100 - 240V CA, 50/60Hz,
2A máx.
8 núcleos: el voltaje de los núcleos 1, 2, 4 y 5 es +, y el de los
núcleos 3, 6, 7 y 8 es -.
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 mm x 179.6 mm x 44 mm
100 - 240V CA, 50/60Hz, 6A
440 mm x 284 mm x 44 mm
Modo común: 6 kV
Modo común: 6 kV; Modo diferencial: 4 kV
IEEE 802.3af, IEEE 802.3at
Temperatura: 0°C - 40°C
Humedad: (10 % - 90 %) HR, sin
condensación
Temperatura: 0°C - 45°C
Humedad: (10 % - 90 %) HR, sin
condensación
Temperatura: -40°C - 70°C
Humedad: (5% - 90%) HR, sin condensación
Ethernet: Cable CAT3 UTP/STP o superior
Fast Ethernet: Cable CAT5 UTP/STP o superior
Gigabit Ethernet: CAT5e o UTP/STP CAT6
1000Base-SX: MMF
1000Base-LX: MMF o SMF
Ethernet: 10Mbps (dúplex medio) / 20Mbps (dúplex completo)
Fast Ethernet: 100Mbps (dúplex medio) / 200Mbps (dúplex completo)
Gigabit Ethernet: 2000Mbps (dúplex completo)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; Velocidad en baudios: 115200
Especificaciones Español
Porta
Modelo G5310P-8-150W G5328P-24-410W
Porta RJ45 10/100/1000 Mbps
Porta SPF 1000 Mbps
Porta da consola
Modo de comutação
Aprendizagem de endereços
MAC
Tabela de endereços MAC
Norma PoE
Núcleo de cabo de energia PoE
Porta de PoE
Dimensões (C x L x A)
Fonte de
alimentação
PoE
Desempenho
Entrada AC
Porta RJ45
Fonte de energia
Proteção
contra raios
Ambiente operacional
Ambiente de armazenamento
Taxa de transmissão de dados
Meios de transmissão
Normas
Saída máxima de uma única
porta
Saída máxima do comutador
924
1 porta SFP independente 4 portas SFP independentes
Guardar e reencaminhar
Envelhecimento automático, aprendizagem automática
16 K
100 - 240 V AC, 50/60 Hz,
2 A máx.
8 núcleos: a tensão dos núcleos 1, 2, 4, 5 é superior e a dos
núcleos 3, 6, 7, 8 é -.
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 mm x 179.6 mm x 44 mm
100 - 240 V AC, 50/60 Hz, 6 A
440 mm x 284 mm x 44 mm
Modo comum: 6 kV
Modo comum: 6 kV; Modo diferencial: 4 kV
IEEE 802.3af, IEEE 802.3at
Temperatura: 0°C - 40°C
Humidade: (10% - 90%) de HR,
sem condensação
Temperatura: 0°C - 45°C
Humidade: (10% - 90%) de HR,
sem condensação
Temperatura: -40°C - 70°C
Humidade: (5% - 90%) de HR, sem condensação
Ethernet: Cabo CAT3 UTP/STP ou superior
Ethernet rápida: Cabo CAT5 UTP/STP ou superior
Gigabit Ethernet: Cabo CAT5E ou CAT6 UTP/STP
1000Base-SX: MMF
1000Base-LX: MMF ou SMF
Ethernet: 10 Mbps (half duplex)/20 Mbps (full duplex)
Ethernet rápida: 100 Mbps (half duplex)/200 Mbps (full duplex)
Gigabit Ethernet: 2000 Mbps (full duplex)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; Taxa de Baud: 115200
Especificações Português
Porte
Modello G5310P-8-150W G5328P-24-410W
Porta RJ45 10/100/1000 Mbps
Porta SFP 1000 Mbps
Porta console
Modalità switching
Apprendimento degli
indirizzi MAC
Tabella degli indirizzi MAC
Standard PoE
Nucleo del cavo di
alimentazione PoE
Porta PoE
Dimensioni (L x P x A)
Alimentazione
PoE
Prestazioni
Ingresso CA
Porta RJ45
Alimentazione
Protezione
contro i fulmini
Ambiente operativo
Ambiente di immagazzinaggio
Ottimizza velocità di trasmissione
Mezzi di trasmissione
Standard
Resa massima di una singola
porta
Resa massima dell'interruttore
924
1 porta SFP indipendente 4 porte SFP indipendenti
Store-and-forward
Auto invecchiamento, auto apprendimento
16 K
100 - 240V CA, 50/60Hz,
2A max
8 nuclei: la tensione dei nuclei 1, 2, 4, 5 è +;
quella dei nuclei 3, 6, 7, 8 è -.
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 mm x 179.6 mm x 44 mm
100 - 240 V CA, 50/60Hz, 6A
440 mm x 284 mm x 44 mm
Modalità comune: 6 kV
Modalità comune: 6 kV; Modalità differenziale: 4 kV
IEEE 802.3af e IEEE 802.3at
Temperatura: 0°C - 40 °C
Umidità: 10% - 90% UR, senza
condensa
Temperatura: 0°C - 45 °C
Umidità: 10% - 90% UR, senza
condensa
Temperatura: -40°C - 70°C
Umidità: (5% - 90%) UR, senza condensa
Ethernet: Cavo UTP/STP CAT3 o superiore
Fast Ethernet: Cavo UTP/STP CAT5 o superiore
Gigabit Ethernet: Cavo UTP/STP CAT5E o CAT6
1000Base-SX: MMF
1000Base-LX: MMF o SMF
Ethernet: 10 Mbps (half duplex) / 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex) / 200 Mbps (full duplex)
Gigabit Ethernet: 2000 Mbps (full duplex)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; Velocità: 115200
Specifiche Italiano
Port
Modell G5310P-8-150W G5328P-24-410W
10/100/1000 Mbit/s RJ45-Port
1000 Mbit/s SFP-Port
Konsolen-Anschluss
Modus wechseln
MAC-Adressentabelle lernen
MAC-Adressentabelle
PoE-Standard
Anzahl der PoE Netzkabeladern
PoE-Port
Abmessungen (L x B x H)
PoE-
Stromversorgung
Leistung
AC-Eingang
RJ45-Port
Stromversorgung
Blitzschutz
Betriebsumgebung
Lagerumgebung
Datenübertragungsrate
Übertragungsmedien
Standards
Maximale Leistung eines
einzelnen Ports
Maximale Leistung vom Switch
924
1 unabhängiger SFP-Port 4 unabhängige SFP-Ports
Speichern und weiterleiten
Automatisches Altern, automatisches Lernen
16 K
100 - 240 V AC, 50/60 Hz,
2 A max
8 Kerne: Spannung der Kerne 1, 2, 4, 5 ist „+“. Bei den Kernen
3, 6, 7, 8 ist sie „-“.
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 mm x 179.6 mm x 44 mm
100 - 240 V AC, 50/60 Hz, 6A
440 mm x 284 mm x 44 mm
Normaler Modus: 6 kV
Normaler Modus: 6 kV; Differentialmodus: 4 kV
IEEE 802.3af, IEEE 802.3at
Temperatur: 0°C - 40°C
Luftfeuchtigkeit: (10 % - 90 %)
RH, nicht kondensierend
Temperatur: 0°C - 45°C
Luftfeuchtigkeit: (10 % - 90 %)
RH, nicht kondensierend
Temperatur: -40°C - 70°C
Luftfeuchtigkeit: (5% - 90%) RH, nicht kondensierend
Ethernet: CAT3 UTP/STP-Kabel oder höher
Fast Ethernet: CAT5 UTP/STP-Kabel oder höher
Gigabit Ethernet: CAT5E oder CAT6 UTP/STP Kabel
1000Base-SX: MMF
1000Base-LX: MMF oder SMF
Ethernet: 10 Mbit/s (Halbduplex)/20 Mbit/s (Vollduplex)
Fast Ethernet: 100 Mbit/s (Halbduplex)/200 Mbit/s (Vollduplex)
Gigabit Ethernet: 2000 Mbit/s (Vollduplex)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; Baudrate: 115200
Spezifikationen Deutsch
Порт
Модел G5310P-8-150W G5328P-24-410W
10/100/1000 Mbps RJ45 порт
1000Mbps SFP порт
Конзолен порт
Режим на превключване
Таблица с MAC адреси,
обучение
Таблица с MAC адреси
PoE стандарт
PoE заранващо кабелно ядро
PoE порт
Размери (Д  Ш  В)
PoE
заранване
Тенически
показатели
AC вод
RJ45 порт
Заранване
Мълниезащита
Работна среда
Среда за съранение
Скорост на предаване на данни
Среда на предаване
Стандарти
Максимална изодна
мощност на един порт
Максимална изодна
мощност на превключвателя
924
1 независим SFP порт 4 независими SFP порта
Съраняване и препращане
Автоматично навършени, автоматично обучение
16 K
100–240V AC, 50/60Hz,
2A макс.
8 ядра: напрежение на ядра 1, 2, 4, 5 е +, и ядра 3, 6, 7, 8 е -
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 mm x 179.6 mm x 44 mm
100–240V AC, 50/60Hz, 6A
440 mm x 284 mm x 44 mm
Общ режим: 6 kV
Общ режим: 6 kV; Диференциален режим: 4 kV
IEEE 802.3af, IEEE 802.3at
Температура: 0°C - 40°C
Влажност: (10% – 90%) RH,
некондензиращи
Температура: 0°C - 45°C
Влажност: (10% – 90%) RH,
некондензиращи
Температура: -40°C - 70°C
Влажност: (5%–90%) RH, некондензиращи
Ethernet: CAT3 UTP/STP или по-добре
Бърз Ethernet: CAT5 UTP/STP или по-добре
Гигабитен Ethernet: CAT5e или CAT6 UTP/STP
1000Base-SX: MMF
1000Base-LX: MMF или SMF
Ethernet: 10Mbps (полудуплекс)/20Mbps (пълен дуплекс)
Бърз Ethernet: 100Mbps (полудуплекс)/200Mbps (пълен дуплекс)
Гигабитен Ethernet: 2000 Mbps (пълен дуплекс)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; Скорост на боуд: 115200
Спецификации Български
Интерфейс
Модель G5310P-8-150W G5328P-24-410W
Порт RJ45 10/100/1000Мбит/с
Порт SFP 1000Мбит/с
Консольный порт
Режим переключения
Изучение MAC-адресов
Таблица MAC-адресов
Стандарт PoE
Жила силового кабеля PoE
PoE-порт
Размеры (Д  Ш  В)
Электропитание
PoE
выполнение
Ввод переменного тока
Порт RJ45
Источник питания
Молниезащита
Рабочая среда
Условия ранения
Скорость передачи информации
Средства передачи
Стандарты
Максимальная выодная
мощность одного порта
Максимальная выодная
мощность коммутатора
924
1 независимый SFP порт 4 независимы SFP порта
Соранение и дальнейшая передача
Автоматические старение, автоматическое обучение
16 K
100 - 240V AC, 50/60Hz,
макс. 2A
8 ядер: напряжение ядер 1, 2, 4, 5— "+", а для ядер 3, 6, 7, 8— "-".
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 мм x 179.6 мм x 44 мм
100 - 240V AC, 50/60Hz, 6A
440 мм x 284 мм x 44 мм
Обычный режим: 6 kV
Обычный режим: 6 kV; Дифференциальный режим: 4 kV
IEEE 802.3af, IEEE 802.3at
Температура: 0°C - 40°C
Влажность: (10–90%) без
конденсации
Температура: 0°C - 45°C
Влажность: (10–90%) без
конденсации
Температура: -40°C - 70°C
Влажность: (5–90%) без конденсации
Ethernet: Кабель CAT3 UTP/STP или выше
Fast Ethernet: Кабель CAT5 UTP/STP или выше
Gigabit Ethernet: Кабель CAT5E или CAT6 UTP/STP
1000Base-SX: MMF
1000Base-LX: MMF или SMF
Ethernet: 10 Mbps (полудуплексный)/20 Mbps (полнодуплексный)
Fast Ethernet: 100 Mbps (полудуплексный)/
200 Mbps (полнодуплексный)
Gigabit Ethernet: 2000Mbps (полнодуплексный)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/1; Скорость передачи в
бода: 115200
арактеристики Русский
2. I forget the login user name and password when logging in to
the web UI. What should I do?
Try entering the default login user name and password (both are admin). If failed still, reset the switch,
and then use the default user name and password to log in.
3. How do I connect the switch through the Console port?
Please operate as follows:
Step 1 Connect the computer and the Console port of the switch with the included Console
cable.
Step 2 Run the serial interface connection software (such as Putty) on the computer. Enter
115200 in the Speed box and select Serial as the Connection type. Then click Open
on the lower right corner.
Step 3 Press Enter twice and enter the user name and password of the switch (both are
admin by default) on the page to enter the command-line interface of the switch.
This is a Class A product. In a domestic environment, this product may cause radio interference, in which
case the user may be required to take adequate measures.
The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This
means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled
or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys
a new electrical or electronic equipment.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
G5328P-24-410W
L3 Managed PoE Switch
Port
Model G5310P-8-150W G5328P-24-410W
10/100/1000 Mbps RJ45 port
1000 Mbps SFP port
Console port
Switching mode
MAC address table learning
MAC address table
PoE standard
PoE power cable core
PoE port
Dimensions (L x W x H)
PoE power
supply
Performance
AC input
RJ45 port
Power supply
Lightning
protection
Operating environment
Storage environment
Data transmission rate
Transmission media
Standards
Maximum output power of a
single port
Maximum output power
of the switch
924
1 independent SFP port 4 independent SFP ports
Store-and-forward
Auto aging, auto learning
16 K
100 - 240V AC, 50/60Hz,
2A max
8 cores: voltage of cores 1, 2, 4, 5 is +, and cores 3, 6, 7, 8 is -
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 mm x 179.6 mm x 44 mm
100 - 240V AC, 50/60Hz, 6A
440 mm x 284 mm x 44 mm
Common mode: 6 kV
Common mode: 6 kV; Differential mode: 4 kV
IEEE 802.3af, IEEE 802.3at
Temperature: 0°C - 40°C
Humidity: (10% - 90%) RH, non-
condensing
Temperature: 0°C - 45°C
Humidity: (10% - 90%) RH, non-
condensing
Temperature: -40°C - 70°C
Humidity: (5% - 90%) RH, non-condensing
Ethernet: CAT3 UTP/STP or better
Fast Ethernet: CAT5 UTP/STP or better
Gigabit Ethernet: CAT5e or CAT6 UTP/STP
1000Base-SX: MMF
1000Base-LX: MMF or SMF
Ethernet: 10 Mbps (half duplex)/20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex)/200 Mbps (full duplex)
Gigabit Ethernet: 2000 Mbps (full duplex)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; Baud rate: 115200
Specifications English
Port
Model G5310P-8-150W G5328P-24-410W
10/100/1000 Mbps RJ45 portu
1000 Mbps SFP portu
Konsol portu
Anahtarlama modu
MAC adres öğrenme
MAC adres tablosu
PoE standardı
PoE güç kablosu çekirdeği
PoE portu
Boyutlar (B x E x Y)
PoE güç
kaynağı
Performans
AC giriş
RJ45 portu
Güç kaynağı
Yıldırım
koruması
Çalışma ortamı
Depolama ortamı
Veri iletim hızı
İletim Ortamları
Standartlar
Tek bir portun maksimum
çıkış gücü
Switch’in maksimum
çıkış gücü
924
1 bağımsız SFP portu 4 bağımsız SFP portu
Sakla ve gönder
Otomatik yaşlanma, otomatik öğrenme
16 K
100 - 240V AC, 50/60 Hz,
2 A maks
8 çekirdek: Çekirdek 1, 2, 4, 5. İçin voltaj + ve çekirdek 3, 6, 7, 8
için voltaj -
1 - 8 1 - 24
30 W
130 W
30 W
370 W
294 mm x 179.6 mm x 44 mm
100 - 240V AC, 50/60 Hz, 6 A
440 mm x 284 mm x 44 mm
Ortak mod: 6 kV
Ortak mod: 6 kV; Diferansiyel mod: 4 kV
IEEE 802.3af, IEEE 802.3at
Sıcaklık: 0°C - 40°C
Nem: (%10 - %90) RH,
yoğuşmasız
Sıcaklık: 0°C - 45°C
Nem: (%10 - %90) RH,
yoğuşmasız
Sıcaklık: -40°C - 70°C
Nem: (%5 - %90) RH, yoğuşmasız
Ethernet: CAT3 UTP/STP veya daha iyisi
Fast Ethernet: CAT5 UTP/STP veya daha iyisi
Gigabit Ethernet: CAT5e veya CAT6 UTP/STP
1000Base-SX: MMF
1000Base-LX: MMF veya SMF
Ethernet: 10 Mbps (yarı çift yönlü) / 20 Mbps (tam çift yönlü)
Fast Ethernet: 100 Mbps (yarı çift yönlü) / 200 Mbps (tam çift yönlü)
Gigabit Ethernet: 2000 Mbps (tam çift yönlü)
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1s
/ 1; Baud hızı: 115200
V2.0 Keep for future reference
10.16.16.168
  • Page 1 1

IP-COM IP-COM G5328P-24-410W L3 Managed PoE Switch Ghid de instalare

Categorie
Comutatoare de rețea
Tip
Ghid de instalare
Acest manual este potrivit și pentru