EN - 13 -
Door open alarm function
If cooler or freezer door is opened more than 2 minutes , appliance sounds ‘beep beep’.
Freezer temperature settings
• Initial temperature value for Freezer Setting
Indicator is -18°C.
• Press freezer set button once.
• When you rst push this button, the last set
value will blink on screen.
• Whenever you press on this button, lower temperature will be set (-16°C, -18°C, -20°C,
-22°C, -24°C superfreeze).
• When you push the freezer set button until superfreeze symbol appears on the Freezer
Setting Indicator, and if you do not push any button in 1 seconds Super Freeze will
ash.
• If you continue to press, it will restart from -16°C.
• The temperature value selected before Holiday Mode, Super Freeze Mode, Super Cool
Mode or Economy Mode is activated will remain the same when the mode is over or
cancelled. The appliance continues to operate with this temperature value.
Cooler temperature settings
• Initial temperature value for Cooler Setting
Indicator is +4 °C.
• Press cooler button once.
• When you rst push this button, the last value
appears on the setting indicator of the cooler.
• Whenever you press on this button, lower temperature will be set. (+8°C, +6°C, +5°C,
+4°C, +2°C, supercool)
• When you push the cooler set button until supercool symbol appears on the Cooler
Setting Indicator, and if you do not push any button in 1 seconds Super Cool will ash.
• If you continue to press, it will restart from +8°C.
• The temperature value selected before Holiday Mode, Super Freeze Mode, Super Cool
Mode or Economy Mode is activated will remain the same when the mode is over or
cancelled. The appliance continues to operate with this temperature value.
Warnings About Temperature Adjustments
• It is not recommended that you operate your fridge in environments colder than 10°C.
• Do not pass to another adjustment before completing an adjustment.
• Temperature adjustments should be made according to the frequency of door openings,
the quantity of food kept inside the fridge and ambient temperature of the placement
of your fridge.
• Your fridge should be operated up to 24 hours according to the ambient temperature
without interruption after being plugged in, this is so it is completely cooled. Do not
open the doors of your fridge and do not place food inside it during this period.
• A 5 minute delay function is applied to prevent damage to the compressor of your fridge,
when you take the plug out and then plug it back in again after an energy breakdown
has occurred. Your fridge will start to operate normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated in the information label. We do not