Yamaha RX-V359 Manualul proprietarului

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

©

RX-V359

Printed in China WG72060

RX-V359

AV Receiver

Ampli-tuner audio-vidéo

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

BE

SECCIÓN DE AUDIO

• Potencia de salida RMS mínima para los altavoces delanteros,

central y surround

[Modelos de EE.UU. y Canadá]

1 kHz, THD de 0,9%, 8 Ω/6 Ω ....................................... 110 W

[Otros modelos]

1 kHz, THD de 0,9%, 6 Ω ............................................... 100 W

• Potencia de salida máxima

[Modelo de Europa]

1 kHz, THD de 0,7%, 4 Ω .............................................. 105 W

• Potencia máxima

[Modelos de Asia, China, Corea y general]

1 kHz, THD de 10%, 6 Ω ................................................ 110 W

• Potencia dinámica

[Modelos de EE.UU. y Canadá]

(IHF, 8/6/4/2 Ω) ......................................... 120/140/160/180 W

[Otros modelos]

(IHF, 6/4/2 Ω) .................................................... 105/135/165 W

• Respuesta de frecuencia

CD, etc. a delanteros L/R ....................... 10 Hz a 100 kHz, –3 dB

• Distorsión armónica total

1 kHz, 50 W, 6 Ω, delanteros L/R ........................ 0,06% o menos

• Relación señal a ruido (red IHF-A)

CD (250 mV) a delanteros L/R, efectos apagados

............................................................................... 100 dB o más

• Ruido residual (red IHF-A)

Delanteros L/R .................................................... 150 µV o menos

• Separación de canales (1 kHz/10 kHz)

CD, etc. (5,1 kΩ terminado) a delanteros L/R

...................................................................... 60 dB/45 dB o más

• Control de tono (delanteros L/R)

Refuerzo/corte BASS ............................................ ±10 dB/100 Hz

Refuerzo/corte TREBLE ....................................... ±10 dB/20 kHz

• Salida de auriculares ................................................ 400 mV/470 Ω

• Sensibilidad de entrada/Impedancia de entrada

CD, etc .................................................................. 200 mV/47 kΩ

MULTI CH INPUT ............................................... 200 mV/47 kΩ

• Nivel de salida/Impedancia de salida

AUDIO OUT (REC) ............................................ 200 mV/1,2 kΩ

SUBWOOFER OUTPUT ........................................... 4 V/1,2 kΩ

SECCIÓN DE VÍDEO

• Tipo de señal de vídeo

[Modelos de EE.UU., Canadá, Corea y general] ................. NTSC

[Otros modelos] ...................................................................... PAL

• Nivel de señal componente .......................................... 1 Vp-p/75 Ω

• Relación señal a ruido ................................................... 50 dB o más

• Respuesta de frecuencia (MONITOR OUT)

Señal de vídeo ........................................... 5 Hz a 10 MHz, –3 dB

Señal componente ..................................... 5 Hz a 60 MHz, –3 dB

SECCIÓN DE FM

• Gama de sintonización

[Modelos de EE.UU. y Canadá] ....................... 87,5 a 107,9 MHz

[Otros modelos] ............................................ 87,50 a 108,00 MHz

• Umbral de silenciamiento de 50 dB (IHF, mod. del 100%)

Mono ................................................................. 2,8 µV (20,2 dBf)

• Relación señal a ruido (IHF)

Mono/estéreo ............................................................ 73 dB/70 dB

• Distorsión armónica (1 kHz)

Mono/estéreo ............................................................... 0,5%/0,5%

SECCIÓN DE AM

• Gama de sintonización

[Modelos de EE.UU. y Canadá] .......................... 530 a 1710 kHz

[Modelos de Asia y general] ................ 530/531 a 1710/1611 kHz

[Otros modelos] ................................................... 531 a 1611 kHz

GENERALIDADES

• Alimentación

[Modelos de EE.UU. y Canadá] ........................ CA 120 V, 60 Hz

[Modelo de Australia] ........................................ CA 240 V, 50 Hz

[Modelos del R.U. y Europa] ............................ CA 230 V, 50 Hz

[Modelo de Corea] ............................................. CA 220 V, 60 Hz

[Modelo de China] ............................................. CA 220 V, 50 Hz

[Modelos de Asia y general]

............................................. CA 110–120/220–240 V, 50/60 Hz

•Consumo

[Modelos de EE.UU. y Canadá] ............................ 240 W/320 VA

[Otros modelos] .................................................................. 240 W

• Consumo en espera

[Modelos de EE.UU. y Canadá] .......................................... 0,5 W

[Otros modelos] ................................................................... 0,7 W

• Dimensiones (An x Al x Prof) ......................... 435 x 151 x 315 mm

• Peso ......................................................................................... 9,0 kg

* Las especificaciones están sujetas a cambios sin previo aviso.

ESPECIFICACIONES

RX-V359_E_cv.fm Page 1 Saturday, January 7, 2006 1:04 PM

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool,

dry, clean place – away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 30 cm on the top,

20 cm on the left and right, and 20 cm on the back of

this unit.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in a environment with high humidity (i.e. a room with

a humidifier) to prevent condensation inside this

unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit,

do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power

cord and outdoor antennas disconnected from a

wall outlet or the unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power plug

from the wall outlet.

16 Install this unit near the AC outlet and where the AC

power plug can be reached easily.

17 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

18 Before moving this unit, press STANDBY/ON to set

this unit in the standby mode, and disconnect the

AC power plug from the wall outlet.

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet, even

if this unit itself is turned off by STANDBY/ON. This

state is called the standby mode. In this state, this unit

is designed to consume a very small quantity of power.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

1

PREPARATIONINTRODUCTION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

English

FEATURES............................................................. 2

GETTING STARTED............................................ 3

Supplied accessories .................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel ................................................................. 4

Remote control........................................................... 6

Front panel display .................................................... 8

Rear panel .................................................................. 9

CONNECTIONS .................................................. 10

Placing speakers....................................................... 10

Connecting speakers ................................................ 11

Information on jacks and cable plugs ...................... 13

Connecting video components................................. 14

Connecting audio components................................. 17

Connecting the FM and AM antennas..................... 18

Connecting the power cable..................................... 19

Turning on the power............................................... 19

SETUP ................................................................... 20

Using BASIC MENU .............................................. 20

PLAYBACK.......................................................... 23

Basic operations....................................................... 23

Additional operations............................................... 25

SOUND FIELD PROGRAMS............................. 30

Sound field program descriptions............................ 31

RECORDING ....................................................... 34

FM/AM TUNING ................................................. 35

Automatic tuning ..................................................... 35

Manual tuning.......................................................... 36

Automatic preset tuning........................................... 37

Manual preset tuning ............................................... 38

Selecting preset stations........................................... 39

Exchanging preset stations ...................................... 40

RADIO DATA SYSTEM TUNING .................... 41

Selecting the Radio Data System program .............. 41

Using the Radio Data System station network ........ 42

Displaying the Radio Data System information ...... 43

SET MENU ............................................................44

Using SET MENU................................................... 45

SOUND MENU....................................................... 45

INPUT MENU......................................................... 47

OPTION MENU...................................................... 48

TROUBLESHOOTING .......................................49

RESETTING THE SYSTEM...............................53

GLOSSARY...........................................................54

Audio information ................................................... 54

Sound field program information ............................ 55

Video information.................................................... 55

SPECIFICATIONS...............................................56

CONTENTS

INTRODUCTION

PREPARATION

BASIC OPERATION

ADVANCED OPERATION

ADDITIONAL INFORMATION

FEATURES

2

Built-in 5-channel power amplifier

◆ Minimum RMS output power

(0.9% THD, 1 kHz, 6 Ω)

Front: 100 W + 100 W

Center: 100 W

Surround: 100 W + 100 W

Decoders and DSP circuits

◆ Proprietary YAMAHA technology for the creation of

multi-channel surround sound

◆ Dolby Digital decoder

◆ Dolby Pro Logic/Dolby Pro Logic II decoder

◆ DTS decoder

◆ Virtual CINEMA DSP

◆ SILENT CINEMA

™

Sophisticated AM/FM tuner

◆ 40-station random and direct preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (preset editing)

Other features

◆ 192-kHz/24-bit D/A converter

◆ 6 additional input jacks for discrete multi-channel input

◆ A SET MENU that allows you to optimize this unit to

suit your individual audiovisual system

◆ Component video input/output capability

(3 COMPONENT VIDEO INs and 1 MONITOR

OUT)

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Night listening mode

◆ Remote control

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the front panel or the ones on the remote control. In case the button

names differ between the front panel and the remote control, the button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In

case of differences between the manual and product, the product has priority.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks

of Dolby Laboratories.

“SILENT CINEMA” is a trademark of YAMAHA

CORPORATION.

“DTS” and “DTS Digital Surround” are registered trademarks of

Digital Theater Systems, Inc.

FEATURES

GETTING STARTED

3

INTRODUCTION

English

Check that you received all of the following parts.

1 Press the tab of the battery compartment

cover and pull it in the direction of the arrow

to open the cover.

2 Remove the cover.

3 Insert the two supplied batteries (AA, R06,

UM-3) according to the polarity markings

(+ and –) on the inside of the battery

compartment.

4 Put the cover back into place.

• Change all of the batteries if you notice a decrease in the

operation range of the remote control.

• Do not use an old battery together with a new one.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

• Do not throw away batteries with general house waste; dispose

of them correctly in accordance with your local regulations.

GETTING STARTED

Supplied accessories

DVD

CD

TUNER

STANDARD

TEST

VOLUME

PROG PROG

SET MENU

LEVEL

VOLUME

MUTE

STRAIGHT

5CH STEREO

NIGHT

SLEEP

A/B/C/D/E

PRESET

MD/CD-R

V-A UX

MULTI CH IN

DTV/CBL

VCR

POWER

Remote control

Batteries (2)

(AA, R06, UM-3)

AM loop antenna

Indoor FM antenna

Installing batteries in the remote control

1

2

4

3

Notes

CONTROLS AND FUNCTIONS

4

1 STANDBY/ON

Turns on this unit or sets it to the standby mode.

• In the standby mode, this unit consumes a small amount of

power in order to receive infrared-signals from the remote

control.

• When you turn on this unit, there will be a 4 to 5-second delay

before this unit can reproduce sound.

2 Remote control sensor

Receives signals from the remote control.

3 PRESET/TUNING

• Switches the function of PRESET/TUNING

l

/

h

between selecting preset station numbers and selecting

the tuning frequency.

• Edits the assignments of present stations.

4 FM/AM

Switches the reception band between FM and AM.

5 A/B/C/D/E

Selects one of the 5 preset station groups (A to E) when

“FM” or “AM” is selected as the input source.

6 PRESET/TUNING l / h

• Selects one of the 8 preset station numbers (1 to 8)

when “FM” or “AM” is selected as the input source.

The colon (:) is displayed in the front panel display.

• Selects the tuning frequency when “FM” or “AM” is

selected as the input source. The colon (:) is not

displayed in the front panel display.

7 Front panel display

Shows information about the operational status of this unit.

8 MEMORY

Stores a preset station in the memory. Hold down this

button for more than 3 seconds to start automatic preset

tuning.

9 PTY SEEK MODE

Sets this unit in the PTY SEEK mode.

0 FREQ/TEXT

Switches the Radio Data System display between the PS

mode, PTY mode, RT mode, CT mode (if the station

offers the corresponding data services) and the frequency

display.

CONTROLS AND FUNCTIONS

Front panel

PHONES

SILENT CINEMA

SPEAKERS

STRAIGHT

PRESET

TUNING

FM

AM

PRESET

MEMORY

TUNING MODE

PTY SEEK

MODE

START

EON

TEXT

FREQ

TUNING

A

B

C

D

E

TONE CONTROL

TREBLE

PROGRAM

INPUT MODE

MULTI CH INPUT

INPUT

BASS

EFFECT

EDIT

MAN'L

AUTO F M

STANDBY

ON

A

B

OFF

AUTO

MAN'L

VOLUME

1

EFGH JIKLM

234 5 67890ABC D

Notes

CONTROLS AND FUNCTIONS

5

INTRODUCTION

English

A EON

Selects a radio program type (NEWS, AFFAIRS, INFO,

or SPORT) for automatic tuning.

B PTY SEEK START

Starts searching for a station once the desired program

type is selected in the PTY SEEK mode.

C TUNING MODE

Switches between automatic tuning (the AUTO indicator

is turned on) and manual tuning (the AUTO indicator is

turned off).

D VOLUME

Controls the output level of all audio channels.

This does not affect the AUDIO OUT (REC) level.

E PHONES jack

Outputs audio signals for private listening with

headphones.

• When you connect headphones, no signals are output at the

SUBWOOFER OUTPUT jack or at the SPEAKERS terminals.

• All Dolby Digital and DTS audio signals are mixed down to the

left and right headphone channels.

F SPEAKERS

Turns on or off the set of front speakers connected to the A

and/or B terminals on the rear panel.

G STRAIGHT

Turns the sound field programs off or on. When this unit is

in the “STRAIGHT” mode, 2-channel or multi-channel

input signals are output directly from their respective

speakers without effect processing.

H TONE CONTROL

Adjusts the bass/treble balance of the front left and right

speakers in conjunction with BASS/TREBLE +/–.

I BASS/TREBLE +/–

Adjusts the bass/treble balance of the front left and right

speakers in conjunction with TONE CONTROL.

J PROGRAM l / h

Selects sound field programs.

K INPUT MODE

Selects either digital or analog input signals exclusively or

sets this unit to automatically detect the type of input

signals and select the corresponding input signals when

one component is connected via both digital and analog

connections.

L INPUT l / h

Selects the desired input source.

M MULTI CH INPUT

Selects the component connected to the MULTI CH

INPUT jacks as the input source.

The input source connected to the MULTI CH INPUT jacks takes

priority over the source selected with INPUT l / h on the front

panel (or the input selector buttons on the remote control).

Note

Notes

Note

CONTROLS AND FUNCTIONS

6

1 Infrared signal transmitter

Outputs infrared control signals. Aim the transmitter at the

component you want to operate.

2 Input selector buttons

Select the input source.

3 A/B/C/D/E

Selects one of the 5 preset station groups (A to E) when

“FM” or “AM” is selected as the input source.

4 STANDARD

Selects the built-in Dolby Pro Logic or Pro Logic II

decoder.

5 5CH STEREO

Selects the “5CH STEREO” sound field program.

6 TEST

Outputs the test tone to adjust the speaker levels.

7 MUTE

Mutes the audio output. Press again to restore the audio

output to the previous volume level.

8 LEVEL

Selects the speaker channel to be adjusted.

9 PROG +/–

Selects sound field programs.

0 Multi control section

Selects and adjusts sound field program parameters or

SET MENU items.

A POWER

Turns on this unit or set it to the standby mode.

B MULTI CH IN

Selects the component connected to the MULTI CH

INPUT jacks as the input source when using an external

decoder, etc.

C PRESET +/–

Selects one of the 8 preset station numbers (1 to 8) when

“FM” or “AM” is selected as the input source.

D SLEEP

Sets the sleep timer.

E NIGHT

Turns on or off the night listening mode.

Remote control

DVD

CD

TUNER

STANDARD

TEST

VOLUME

PROG PROG

SET MENU

LEVEL

VOLUME

MUTE

STRAIGHT

5CH STEREO

NIGHT

SLEEP

A/B/C/D/E

PRESET

MD/CD-R

V-AUX

MULTI CH IN

DTV/CBL

VCR

POWER

1

2

3

6

7

8

9

0

A

B

C

D

E

F

G

H

4

5

CONTROLS AND FUNCTIONS

7

INTRODUCTION

English

F STRAIGHT

Turns the sound field programs off or on. When this unit is

in the “STRAIGHT” mode, 2-channel or multi-channel

input signals are output directly from their respective

speakers without effect processing.

G VOLUME +/–

Controls the output level of all audio channels.

This does not affect the AUDIO OUT (REC) level.

H SET MENU

Enters “SET MENU”.

■ Using the remote control

The remote control transmits a directional infrared ray.

Be sure to aim the remote control directly at the remote

control sensor on this unit during operation.

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following types

of conditions:

– places of high humidity, such as near a bath

– places of high temperature, such as near a heater or stove

– places of extremely low temperatures

– dusty places

Note

Notes

30º 30º

Approximately 6 m (20 ft)

CONTROLS AND FUNCTIONS

8

1 Decoder indicators

The respective indicator lights up when any of the

decoders of this unit function.

2 VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active.

3 SILENT CINEMA indicator

Lights up when headphones are connected and a sound

field program is selected.

4 Input source indicators

A corresponding cursor lights up to show the currently

selected input source.

5 AUTO indicator

Lights up when this unit is in the automatic tuning mode.

6 TUNED indicator

Lights up when this unit is tuned into a station.

7 STEREO indicator

Lights up when this unit is receiving a strong signal for an

FM stereo broadcast while the AUTO indicator is lit.

8 MUTE indicator

Flashes while the MUTE function is on.

9 VOLUME level indicator

Indicates the current volume level.

0 PCM indicator

Lights up when this unit is reproducing PCM (Pulse Code

Modulation) digital audio signals.

A STANDARD indicator

Lights up when the “STANDARD” program is selected.

B NIGHT indicator

Lights up when you select a night listening mode.

C Speaker indicators

Light up according to the set of front speakers selected.

D Headphones indicator

Lights up when headphones are connected.

E CINEMA DSP indicator

Lights up when you select a CINEMA DSP program.

F HiFi DSP indicator

Lights up when you select a HiFi DSP program.

G Multi-information display

Shows the name of the current program and other

information when adjusting or changing settings.

H Radio Data System indicators

(U.K. and Europe models only)

Lights up when the Radio Data System data is being

received.

EON

Lights up when the EON data service is being

received.

PTY HOLD

Lights up while searching for the Radio Data System

stations in the PTY SEEK mode.

I SLEEP indicator

Lights up while the sleep timer is on.

J MEMORY indicator

Flashes to show that a station can be stored.

K Input channel indicators

Indicate the channel components of the current digital

input signal.

Front panel display

VIRTUAL

SILENT CINEMA

STANDARD NIGHT

AB

SP

HiFi DSP

AUTO

TUNED

STEREO

MEMORY

MUTE

VOLUME

PTY

HOLD PS

PTY

RT

CT EON

SLEEP

ft

dB

LFE SL SR

L

C

R

dB

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER CD

DIGITAL

PCM

PL

G

0ABCEDF JIK

H

1 32 4 756 8 9

CONTROLS AND FUNCTIONS

9

INTRODUCTION

English

1 MULTI CH INPUT jacks

See page 16 for connection information.

2 Video component jacks

See page 14 for connection information.

3 COMPONENT VIDEO jacks

See page 16 for connection information.

4 Antenna terminals

See page 18 for connection information.

5 DIGITAL INPUT jacks

See pages 14 and 15 for connection information.

6 Audio component jacks

See page 17 for connection information.

7 SUBWOOFER OUTPUT jack

See page 12 for connection information.

8 SPEAKERS terminals

See page 11 for connection information.

Rear panel

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

CD

MD/

CD-R

(PLAY)

(REC)

IN

OUT

L

R

DIGITAL

INPUT

DVD

COAXIAL

3

DTV/CBL

OPTICAL

DVD

AUDIO

L

R

DVD

DTV/

CBL

IN

OUT

VCR

V-AUX

VIDEO

OUTPUT

SUB

WOOFER

MONITOR

OUT

DTV/

CBL

DV

D

A

B

C

COMPONENT VIDEO

PBYPR

MONITOR OUT

SURROUND

L

R

AM

ANT

GND

FM

ANT

TUNER

2

1

SPEAKERS

L

R

B

A

FRONT

CENTER

FRON

T

L

R

1234

56 7 8

CONNECTIONS

10

The speaker layout below shows the standard ITU-R

*

speaker setting. You can use it to enjoy CINEMA DSP and

multi-channel audio sources.

*

ITU-R is the radio communication sector of the ITU

(International Telecommunication Union).

■ Front speakers (FL and FR)

The front speakers are used for the main source sound plus

effect sounds. Place these speakers an equal distance from

the ideal listening position. The distance of each speaker

from each side of the video monitor should be the same.

■ Center speaker (C)

The center speaker is for the center channel sounds

(dialog, vocals, etc.). If for some reason it is not practical

to use a center speaker, you can do without it. Best results,

however, are obtained with the full system. Place the

center speaker centrally between the front speakers and as

close to the monitor as possible, such as directly over or

under it.

■ Surround speakers (SL and SR)

The surround speakers are used for effect and surround

sounds. Place these speakers behind your listening

position, facing slightly inwards, about 1.8 m (6 ft) above

the floor.

■ Subwoofer (SW)

The use of a subwoofer, such as the YAMAHA Active

Servo Processing Subwoofer System, is effective not only

for reinforcing bass frequencies from any or all channels,

but also for high fidelity reproduction of the LFE (low-

frequency effect) channel included in Dolby Digital and

DTS software. The position of the subwoofer is not so

critical, because low bass sounds are not highly

directional. But it is better to place the subwoofer near the

front speakers. Turn it slightly toward the center of the

room to reduce wall reflections.

CONNECTIONS

Placing speakers

60˚

30˚

FL

FR

C

SL

SR

80˚

SL

FR

FL

C

SL

SR

SW

1.8 m (6 ft)

11

CONNECTIONS

PREPARATION

English

Be sure to connect the left channel (L), right channel (R),

“+” (red) and “–” (black) properly. If the connections are

faulty, no sound will be heard from the speakers, and if the

polarity of the speaker connections is incorrect, the sound

will be unnatural and lack bass.

• Use speakers with the specified impedance

shown on the rear panel of this unit.

• Before connecting the speakers, make sure

that this unit is turned off.

• Do not let the bare speaker wires touch each

other or do not let them touch any metal part

of this unit. This could damage this unit and/or

speakers.

• Use magnetically shielded speakers. If this

type of speakers still creates the interference

with the monitor, place the speakers away

from the monitor.

■ Before connecting to the SPEAKERS

terminal

A speaker cord is actually a pair of insulated cables

running side by side. Cables are colored or shaped

differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+” (red)

terminals of this unit and your speaker. Connect the plain

cable to the “–” (black) terminals.

Remove approximately 10 mm (3/8”) of insulation

from the end of each speaker cable and then

twist the bare wires of the cable together to

prevent short circuits.

■ Connecting to the FRONT A SPEAKERS

terminals

1 Loosen the knob.

2 Insert the bare end of the speaker wire into

the hole on the terminal.

3 Tighten the knob to secure the wire.

Connecting the banana plug

(except U.K., Europe, Korea and Asia models)

The banana plug is a single-pole electrical connector

widely used to terminate speaker cables.

First, tighten the knob and then insert the banana plug

connector into the end of the corresponding terminal.

■ Connecting to the FRONT B, CENTER,

and SURROUND SPEAKERS terminals

1 Press down the tab.

2 Insert the bare end of the speaker wire into

the hole on the terminal.

3 Release the tab to secure the wire.

Connecting speakers

CAUTION

10 mm (3/8”)

1

2

3

Red: positive (+)

Black: negative (–)

Banana plug

3

1

2

Red: positive (+)

Black: negative (–)

12

CONNECTIONS

■ FRONT terminals

Connect one or two speaker systems (1, 2) to these

terminals. If you use only one front speaker system,

connect it to the FRONT A terminals.

■ CENTER terminals

Connect a center speaker (3) to these terminals.

■ SURROUND terminals

Connect surround speakers (4, 5) to these terminals.

■ SUBWOOFER OUTPUT jack

Connect a subwoofer with built-in amplifier (6) (such as

the YAMAHA Active Servo Processing Subwoofer

System) to this jack.

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

CD

MD/

CD-R

(PLAY)

(REC)

IN

OUT

L

R

DIGITAL

INPUT

DVD

COAXIA

L

3

DTV-CBL

OPTICAL

DVD

AUDIO

L

R

DVD

DTV/

CBL

IN

OUT

VCR

V-AUX

VIDEO

OUTPUT

SUB

WOOFER

MONITOR

OUT

DTV/

CBL

DV

D

A

B

C

COMPONENT VIDEO

PBYPR

MONITOR OUT

SURROUND

L

R

AM

ANT

GND

FM

ANT

TUNER

2

1

SPEAKERS

L

R

B

A

FRONT

CENTER

FRON

T

L

R

5

31 2

2

4

1

6

Subwoofer Center

speaker

Front speakers (A)

LeftRight

Surround speakers

Front speakers (B)

LeftRight

6

1

2

5

4

3

Speaker layout

13

CONNECTIONS

PREPARATION

English

■ Audio jacks

This unit has three types of audio jacks (analog audio,

digital audio coaxial, and digital audio optical).

Connection depends on the availability of audio jacks on

your other components.

AUDIO jacks

For conventional analog audio signals transmitted via left

and right analog audio cables. Connect red plugs to the

right jacks and white plugs to the left jacks.

DIGITAL AUDIO COAXIAL jacks

For digital audio signals transmitted via coaxial digital

audio cables.

DIGITAL AUDIO OPTICAL jacks

For digital audio signals transmitted via optical digital

audio cables.

• You can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams. When you connect components to both the

COAXIAL and OPTICAL jacks, priority is given to the signals

input at the COAXIAL jack. All digital input jacks are

compatible with 96 kHz sampling digital signals.

• This unit handles digital and analog signals independently. Thus

audio signals input at the analog jacks are output only at the

analog AUDIO OUT (REC) jacks.

• Pull out the cap from the optical jack before you connect the

fiber optic cable. Do not discard the cap. When you are not

using the optical jack, be sure to put the cap back in place. This

cap protects the jack from dust.

■ Video jacks

This unit has two types of video jacks (composite video,

and component video). Connection depends on the

availability of input jacks on your video monitor.

VIDEO jacks

For conventional composite video signals transmitted via

composite video cables.

COMPONENT VIDEO jacks

For component signals, separated into the luminance (Y)

and chrominance (P

B, PR) video signals transmitted on

separate wires of component video cables.

Information on jacks and cable plugs

VIDEO

COMPONENT VIDEO

Y PB PR

PB

Y

P

R

V

COAXIAL

DIGITAL AUDIO

AUDIO

OPTICAL

DIGITAL AUDIO

R

L

C

O

R

L

Left and right

analog audio

cable plugs

Optical

digital

audio cable

plug

Coaxial

digital audio

cable plug

Composite

video cable

plug

Component

video cable

plugs

Audio jacks and cable plugs Video jacks and cable plugs

(Red)(White) (Orange) (Yellow) (Green) (Blue) (Red)

Notes

Video signal flow for MONITOR OUT

Output

(MONITOR OUT)

Input

COMPONENT

VIDEO

14

CONNECTIONS

■ Connecting a video monitor

Connect the video input jack of your video monitor to the

MONITOR OUT jack.

■ Connecting a DVD player/cable TV/

satellite tuner

Connect the coaxial digital audio signal output jack of

your DVD player to the DIGITAL INPUT DVD

COAXIAL jack and connect the video signal output jack

of the component to the DVD VIDEO jack of this unit.

Connect the optical digital audio signal output jack of

your cable TV or satellite tuner to the DIGITAL INPUT

DTV/CBL jack and connect the video signal output jack

of the component to the DTV/CBL VIDEO jack of this

unit.

y

• Use the AUDIO jacks of this unit for a video component which

does not have optical digital output jack. To enjoy the surround

sound, use the sound field program selector buttons on the

remote control (see page 30).

• If your DVD player does not have a coaxial digital output jack

but has an optical cable, connect the jack to the DIGITAL

INPUT DVD OPTICAL.

• You can also connect a video monitor, DVD player, digital TV,

and cable TV to this unit using the COMPONENT VIDEO

connections (see page 16).

■ Connecting a DVD recorder/VCR

Connect the audio signal input jacks of your video

component to the VCR AUDIO OUT jacks of this unit.

Then connect the video signal input jack of the video

component to the VCR VIDEO OUT jack of this unit for

picture recording.

Connect the audio signal output jacks of your component to

the VCR AUDIO IN jacks of this unit. Then connect the

video signal output jack of the component to the VCR

VIDEO IN jack of this unit to play a source from your

recording component.

• Once you have connected a recording component to this unit,

keep the component turned on while using this unit. If the

power is turned off, this unit may distort the sound from other

components.

• Be sure to connect your video source components in the same

way you connect your video monitor to this unit. For example,

if you connect your video monitor to this unit using a VIDEO

connection, connect your video source components to this unit

using the VIDEO connections.

■ Connecting another video component

Connect the video signal output jack of your component to

the V-AUX VIDEO jack of this unit.

Connect the audio signal output jacks of the component to

the V-AUX AUDIO jacks of this unit.

Connecting video components

Notes

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

CD

MD/

CD-R

(PLAY)

(REC)

IN

OUT

L

R

DIGITAL

INPUT

DVD

COAXIA

L

3

DTV/CBL

OPTICAL

DVD

AUDIO

L

R

DVD

DTV/

CBL

IN

OUT

VCR

V-AUX

VIDEO

OUTPUT

SUB

WOOFER

MONITOR

OUT

DTV/

CBL

DV

D

A

B

C

COMPONEN

PY

MONITOR OUT

SUR

R

2

1

VC

L R

V

O

DVD player

Video monitor

Video in

Audio out

Video out

Audio

out

Audio

out

15

CONNECTIONS

PREPARATION

English

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

CD

MD/

CD-R

(PLAY)

(REC)

IN

OUT

L

R

DIGITAL

INPUT

DVD

COAXIA

L

3

DTV/CBL

OPTICAL

DVD

AUDIO

L

R

DVD

DTV/

CBL

IN

OUT

VCR

V-AUX

VIDEO

OUTPUT

SUB

WOOFER

MONITOR

OUT

DTV/

CBL

DV

D

A

B

C

COMPONEN

PY

MONITOR OUT

SUR

R

2

1

O

V

L R

VV

LR LR

Cable TV or

Satellite tuner

DVD recorder or

VCR

Audio

out

Audio inAudio out Video outVideo in

Video

out

Audio out

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

CD

MD/

CD-R

(PLAY)

(REC)

IN

OUT

L

R

DIGITAL

INPUT

DVD

COAXIA

L

3

DTV/CBL

OPTICAL

DVD

AUDIO

L

R

DVD

DTV/

CBL

IN

OUT

VCR

V-AUX

VIDEO

OUTPUT

SUB

WOOFER

MONITOR

OUT

DTV/

CBL

DV

D

A

B

C

COMPONEN

PY

MONITOR OUT

SUR

R

2

1

L R

V

Another video

component

Audio

out

Video

out

16

CONNECTIONS

■ Connecting to the COMPONENT VIDEO jacks

You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using

COMPONENT VIDEO connections.

Be sure to connect your video source components in the same way you connect your video monitor to this unit. For example, if you

connect your video monitor to this unit using a COMPONENT VIDEO connection, connect your video source components to this unit

using the COMPONENT VIDEO connection.

■ Connecting to the MULTI CH INPUT jacks

This unit is equipped with 6 additional input jacks (FRONT L/R, CENTER, SURROUND L/R and SUBWOOFER) for

discrete multi-channel input from a multi-format player, external decoder or sound processor. Connect the output jacks

on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right

output jacks to the left and right input jacks for the front and surround channels.

• When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 25), this unit automatically

turns off the digital sound field processor, and you cannot select sound field programs.

• This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that

you connect a 5.1-channel speaker system before using this feature.

• When headphones are used, signals are output only from the front left and right channels.

Note

Notes

VCR

DTV/

CBL

DV

D

A

B

C

COMPONENT VIDEO

PBYPR

MONITOR OUT

SURROUND

L

R

PR

PB

Y

PR

PB

Y

PR

PB

Y

PB

PR

Y

Video monitor

DVD player

DVD recorder or

VCR

Video out

Video in

Cable TV or

satellite tuner

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

CD

DIGITAL

INPUT

DVD

COAXIAL

3

AUDIO

L

R

DVD

DTV/

CBL

IN

V-AUX

VID

E

LR

Multi-format player or

external decoder

Surround outCenter out

Subwoofer out Front out

17

CONNECTIONS

PREPARATION

English

■ Connecting a CD player

Connect the output jacks of your CD player to the CD

jacks of this unit.

y

To make a digital connection to a CD player, select the

corresponding setting for DIGITAL INPUT jacks in “INPUT

ASSIGN” (see page 47).

■ Connecting a CD recorder/MD recorder

Connect the input jacks of your CD recorder or MD

recorder to the MD/CD-R OUT (REC) jacks.

Connect the output jacks of your CD recorder or MD

recorder to the MD/CD-R IN (PLAY) jacks to play a

source from your recording component.

Once you have connected a recording component to this unit,

keep the component turned on while using this unit. If the

component is turned off, this unit may distort the sound from

other components.

Connecting audio components

Note

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

CD

MD/

CD-R

(PLAY)

(REC)

IN

OUT

L

R

DIGITAL

INPUT

DVD

COAXIA

L

3

DTV-CBL

OPTICAL

DVD

AUDIO

L

R

DVD

DTV

/

CBL

IN

OU

T

VCR

V-AU

X

OUTPUT

SUB

WOOFER

2

1

L

R

L

R

L

R

CD player

CD recorder or

MD recorder

Audio out

Audio in

18

CONNECTIONS

Both FM and AM indoor antennas are supplied with this

unit. In general, these antennas should provide sufficient

signal strength. Connect each antenna correctly to the

designated terminals.

• The AM loop antenna should be placed away from this unit.

• A properly installed outdoor antenna provides clearer reception

than an indoor one. If you experience poor reception quality,

install an outdoor antenna. Consult the nearest authorized

YAMAHA dealer or service center about outdoor antennas.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

■ Connecting the AM loop antenna

1 Set up the AM loop antenna.

2 Press down the tab of the AM ANT terminal.

3 Insert the one of the AM loop antenna lead

wires into the AM ANT terminal.

4 Release the tab back to secure the wire.

5 Repeat steps 2 through 4 to connect the

other lead wire to the GND terminal.

Once you have properly connected the AM loop

antenna to this unit, orient the AM loop antenna for

the best reception when you tune into AM stations.

Connecting the FM and AM antennas

Notes

AM

ANT

GND

FM

ANT

TUNER

AM loop

antenna

(supplied)

Ground

For maximum safety and minimum

interference, connect the antenna GND

terminal to a good earth ground. A good

earth ground is a metal stake driven into

moist earth.

Indoor FM

antenna

(supplied)

Outdoor AM antenna

Use a 5 to 10 m (16 to 32 ft) of

vinyl-covered wire extended

outdoors from a window.

Pagina se încarcă ...

Yamaha RX-V359 Manualul proprietarului

Yamaha RX-V359 Manualul proprietarului

în alte limbi

Lucrări conexe

Alte documente