Silvercrest SMZG 500 A1 User Manual And Service Information

English ........................................................................................................................ 2

Hrvatski ................................................................................................................... 19

Română ................................................................................................................... 37

Български ................................................................................................................ 57

Ελληνικά .................................................................................................................. 77

Deutsch ..................................................................................................................... 97

V 1.2

SilverCrest SMZG500 A1

2 - English

Contents

Introduction ................................................................................................................ 3

Intended use ............................................................................................................... 3

Predictable misuse ........................................................................................................................................... 3

Package Contents ....................................................................................................... 4

Controls ...................................................................................................................... 4

Technical specifications ............................................................................................... 5

Safety instructions ...................................................................................................... 5

Before you start ....................................................................................................... 11

Getting started ......................................................................................................... 11

Use ........................................................................................................................... 11

Preparing food .............................................................................................................................................. 11

Setting up and filling the Mini Chopper...................................................................................................... 11

Switching on / selecting speed ................................................................................................................... 12

Recommended speeds ................................................................................................................................. 13

Removing the chopped food / whipped cream ......................................................................................... 14

After use ................................................................................................................... 14

Maintenance / cleaning .............................................................................................................................. 14

Storing the Mini Chopper .......................................................................................... 15

Troubleshooting ....................................................................................................... 16

Environmental regulations and disposal information ............................................... 16

Conformity ............................................................................................................... 17

Warranty Information .............................................................................................. 17

SilverCrest SMZG500 A1

English - 3

Introduction

Thank you for buying a SilverCrest product.

The SMZG500 A1 Mini Chopper, hereinafter the Mini Chopper, can be used for chopping, mixing and

crushing food and ice cubes and for whipping cream.

Intended use

This Mini Chopper is not intended for commercial use.

This Mini Chopper is suitable exclusively for use indoors, in dry, sealed spaces.

Make sure that the Mini Chopper is always positioned securely.

The Mini Chopper fulfils all relevant norms and standards associated with CE Conformity. Any

modifications to the appliance other than recommended changes by the manufacturer may result in these

standards no longer being met.

Predictable misuse

 The Mini Chopper may not be used for crushing or chopping hot

or boiling foods.

 The Mini Chopper may not be used to crush bones, frozen food

(with the exception of ice cubes and frozen berries), coffee

beans, grains or nutmeg.

 Non-food substances should also not be processed.

SilverCrest SMZG500 A1

4 - English

Package contents

 Motor unit with power cable and plug

 Glass container

 Lid for glass container with sealing ring

 Cutting blades

 Emulsifying disc

 Plastic non-slip ring

 This user manual

Controls

These operating instructions have a fold-out cover. On the inside of the cover, the Mini Chopper is

depicted with a numbered key. The meanings of the numbers are as follows:

1 Buttons for speed I / II

2 Motor unit

3 Lid

4 Power cable and plug

5 Cutting blades

6 Emulsifying disc

7 Glass bowl with 1,000 ml capacity and max. fill level of 500 ml

8 Stainless steel guide pin

9 Plastic non-slip ring

10 Fill level indicator and MAX marking at 500 ml

SilverCrest SMZG500 A1

English - 5

Technical specifications

Model name: SilverCrest SMZG500 A1

Operating voltage: 220 - 240 V, 50/60 Hz

Power: max. 500 W

Speed levels: 2

Power cable length: approx. 100 cm

Dimensions: height approx. 24 cm, diameter approx. 17 cm

Weight incl. accessories: approx. 1,715 g

Max. fill level: 500 ml

SO time*: with cutting blades: 30 seconds

with emulsifying disc: 2 minutes

Protection Class II

* The short operating time (SO time) is the maximum permitted continuous operating time without the

electric motor overheating and potentially being damaged. After this operating period, you must switch off

the Mini Chopper and wait for the motor to cool down to ambient temperature.

Safety instructions

Before you use this appliance for the first time, please read the

following notes in this manual and heed all warnings, even if you

are familiar with handling electronic devices and household

appliances. Keep these operating instructions in a safe place for

future reference. If you sell the appliance or give it away, pass on

the user manual at the same time. It forms parts of the product.

SilverCrest SMZG500 A1

6 - English

Explanation of symbols

In this user manual, warnings are used as follows. Where

applicable, some of these symbols are affixed to the product itself in

order to alert the user to potential risks.

WARNING!

This symbol denotes important information for the safe

operation of the product and user safety. It warns against

risks which could, if left unheeded, cause danger to life and

limb, injuries or material damage.

Risk of electric shock!

This symbol warns of risks which could, if left unheeded,

cause damage to life and limb through electric shock.

Risk of fire!

This symbol warns that fires could start if the warning is left

unheeded.

This symbol denotes further information on the topic.

Children and persons with disabilities

This appliance is not to be used by children. The appliance and its

power cable (4) should be kept out of the reach of children. The

appliance may be used by persons with reduced physical, sensory

or mental capabilities and/or who have no experience in, or

knowledge of, using such appliances providing they are supervised

or have been instructed in how to use the appliance safely and

SilverCrest SMZG500 A1

English - 7

have understood the associated risks. Do not allow children to play

with the appliance.

WARNING of suffocation!

Packaging material is not a toy. Do not allow children to

play with plastic bags. There is a risk of suffocation.

WARNING of falling objects!

Make sure that children cannot pull the device from the work

surface by the power cable (4). There is a danger of injury.

Keep the appliance out of the reach of children.

General safety instructions

Risk of electric shock!



If the power cable (4) of this appliance is damaged, it

must be replaced by the manufacturer, its customer

service or a similarly qualified person, in order to avoid

any possible danger.



Never open the housing of the Mini Chopper. This does

not contain any replaceable parts. Opening the housing

can expose you to the risk of electric shock.



If you notice any smoke, unusual noises or strange

smells, switch off the appliance immediately and remove

the plug from the mains socket. If this occurs, do not

continue to use the appliance and have it checked out by

an expert. Never inhale smoke from a possible

appliance fire. If you do inadvertently inhale smoke, seek

SilverCrest SMZG500 A1

8 - English

medical attention. Smoke inhalation can be damaging to

your health.



Make sure that the power cable (4) cannot be damaged

by sharp edges or hot spots.



Make sure that the power cable (4) cannot get crushed

or squashed.



The appliance must always be disconnected from the

mains when left unsupervised and before assembly,

disassembly or cleaning.



When disconnecting the power cable (4) from the mains

socket, always pull on the mains plug and never on the

power cable (4) itself.



If you notice visible damage to the Mini Chopper or the

power cable (4), switch off the device, remove the mains

plug from the mains socket, and contact customer service

(see "Warranty information" on page 17).



Only connect the Mini Chopper to a properly installed,

easily accessible mains socket with the same mains

voltage as detailed on the name plate. After connecting

the appliance, the mains socket must still be easily

accessible so that you can remove the mains plug quickly

in the event of an emergency.



Never immerse the motor unit (2), the power cable (4) or

the mains plug in water or other liquids. If liquid does

penetrate the motor unit (2), disconnect the mains plug

SilverCrest SMZG500 A1

English - 9

from the mains socket immediately and contact customer

service (see "Warranty information" on page 17).



Never operate the Mini Chopper with wet hands.

Warning about property damage



Do not leave the Mini Chopper unattended while running

so you can react quickly in the case of hazards.



If the cutting blades (5) or the emulsifying disc (6) only

turn slowly or not at all, switch the Mini Chopper off

immediately, disconnect the power cable (4) from the

mains socket and check whether the cutting blades (5) or

the emulsifying disc (6) are blocked or the food is too

tough. Also check that you have assembled the Mini

Chopper correctly.



Please note the maximum fill level of 500 ml - see the fill

level indicator (10).



The Mini Chopper has a plastic non-slip ring (9). If

necessary, place something underneath the device, as

work-surfaces are sometimes treated with detergents

which could attack or even dissolve the plastic non-slip

ring (9).

Risk of overheating and fire



Only ever operate the Mini Chopper with the glass bowl

(7) filled and never empty.

SilverCrest SMZG500 A1

10 - English



If you wish to whip cream, fill the glass bowl (7) with

cream to at least the 200 ml level.



Note the SO times (short operating times). See the

technical specifications on page 5.



Do not use the appliance in direct sunlight or near

heating appliances (heaters, stoves, ovens etc.).



Do not place hot or boiling foods in the glass bowl (7).

Otherwise the motor unit (2) could overheat or the glass in

the bowl (7) could crack. Always allow hot or boiling

foods to cool down first before adding them to the glass

bowl (7) and processing them with the Mini Chopper.

Risk of injury



Before changing accessories or fittings which move when

the unit is running, switch it off and disconnect it from the

mains socket.



Never open the lid (3) or remove the motor unit (2) while

the Mini Chopper is running. Otherwise, rotating bits of

food may be thrown out with great force.



The cutting blades (5) are extremely sharp. Be very

careful when washing and handling the cutting

blades (5).



The cutting blades (5) continue to turn immediately after

being switched off. Wait for the cutting blades (5) to

come to a complete standstill before removing the motor

unit (2), opening the lid (3) or taking other steps.

SilverCrest SMZG500 A1

English - 11

Before you start

Unpack the appliance. First check whether all the parts are complete and undamaged. If any items are

missing or damaged, please phone our hotline (see "Warranty information" on page 17). Keep the

packaging material away from children and dispose of appropriately.

Getting started

Before using the device for the first time, clean the lid (3), cutting blades (5), emulsifying disc (6) and glass

bowl (7). For more on this, please refer to the "Maintenance / cleaning" section on page 14.

Use

Preparing food

Wash the food.

 For meat, remove tendons, bones and skin.

 For herbs, remove the stalks.

 Cut solid food (e.g. meat, fish, vegetables) into chunks of around 2 to 3 cm square.

 Remove the outer shell of nuts.

 Cream should be kept as cool as possible so it whips better.

Setting up and filling the Mini Chopper

1. If the power cable (4) is connected to the mains socket, disconnect it from the mains socket.

2. Place the plastic non-slip ring (9) on an even, dry surface.

3. Place the glass bowl (7) on the plastic non-slip ring (9). Make sure that it is centred on the plastic

non-slip ring (9) and the edges of the plastic non-slip ring (9) are not bent.

If you wish to chop or mix food, insert the cutting blades (5). Use the emulsifying disc (6) to

prepare whipped cream.

4. Depending on what you wish to prepare, place the cutting blades (5) or the emulsifying disc (6) on

the stainless steel guide pin (8).

5. Prepare the food (see previous section).

6. Fill the glass bowl (7) with the food to be processed. Note the recommendations (see page 13) and

never overfill the glass bowl (7) beyond the maximum 500 ml level - see fill level indicator (10).

7. Place the lid (3) on to the glass bowl (7). When doing so, make sure that the thinner cylinder on the

axle (see arrow) is protruding slightly through the hole in the middle of the lid (3).

SilverCrest SMZG500 A1

12 - English

8. Hold the glass bowl (7) in one hand and the lid (3) in the other and twist them gently against one

another to check they are fitted firmly and properly.

9. Place the motor unit (2) on to the lid (3). Hold the motor unit (2) in one hand and the lid (3) in the

other and twist them gently against one another. The motor unit (2) should rest in the two curved

recesses in the lid (3) and it should no longer be possible to twist it. It sinks down slightly when

properly fitted.

Warning!

Make sure the power cable (4) is not in your working area. Otherwise, you could accidentally

pull on it and tip over the Mini Chopper or cause the motor unit (2) to fall off the glass

bowl (7).

Switching on / selecting speed

The Mini Chopper can only be switched on once the motor unit (2) is properly locked into

position on the lid (3).

Warning!

Hold the motor unit (2) firmly in place with one hand and the glass bowl (7) with the other

when using the device to ensure the contents are not thrown out.

1. Connect the power cable (4) to a live mains socket.

2. Hold the motor unit (2) firmly and use your thumb to press the I or II button for the speed (1) you

want. See the recommendations on page 13.

Warning!

Note the SO times (short operating times) for the cutting blades (5) and the emulsifying

disc (6)

.

See the technical specifications on page 5.

SilverCrest SMZG500 A1

English - 13

3. Release the button for the speed (1) to switch off the Mini Chopper.

Risk of injury

The cutting blades (5) continue to turn immediately after being switched off. Wait for the

cutting blades (5) to come to a complete standstill before removing the motor unit (2), opening

the lid (3) or taking other steps.

Recommended speeds

The table below sets out the recommended quantities, speeds and processing times for various foods.

The quantities and times listed are guidelines to achieve the best possible results for the

relevant ingredients. The values can vary based on consistency.

Ingredients Recommended

quantity

Recommended time Recommended

speed

Almonds 200 g coarse 1 x 10 sec.

fine 3 x 10 sec.

inc. breaks

Speed II

Cloves of garlic 50 g pulsing

10 x 1 sec.

Speed II

Onions, coarse

(quartered, approx.

10 g)

150 g pulsing 4 x 1 sec.

break

pulsing 4 x 1 sec.

Speed I

Onions, fine

(quartered, approx.

10 g)

150 g pulsing 5 x 1 sec.

break

pulsing 5 x 1 sec.

Speed II

Diced meat

(approx. 2 x 2 cm)

250 g 6 x 5 sec.

inc. breaks

Speed II

Diced cheese, e.g.

Gouda

(cooled, approx. 2 x

2 cm)

100 g 2 x 5 sec.

inc. breaks

Speed II

200 g 3 x 5 sec.

inc. breaks

Speed II

Carrots

(in approx. 2 cm

pieces)

200 g coarse 1 x 5 sec.

fine 2 x 5 sec.

inc. breaks

Speed I

SilverCrest SMZG500 A1

14 - English

Ice cubes 100 g pulsing

coarse 10 x 1 sec.

fine 20 x 1 sec.

Speed II

Cream* min. 200 ml 1 x 40 sec. Speed I

* Use the emulsifying disc (6) provided for whipping cream. The processing time until the desired

consistency of cream is reached can vary based on the fat content. Please also note the maximum fill level

of 500 ml also applies to cream.

The breaks set out in the list give the ingredients the chance to come back into contact with the

cutting blades (5). If the ingredients get stuck to the inside of the glass bowl (7), push them

down with a scraper, for example, and continue chopping.

Removing the chopped food / whipped cream

1. Unplug the mains plug (4) from the mains socket.

2. Remove the motor unit (2) and the lid (3).

3. Remove the cutting blades (5) or the emulsifying disc (6) from the glass bowl (7).

Risk of injury

The cutting blades (5) are extremely sharp. Be very careful when handling the cutting

blades (5).

4. Remove the food. You can use a scraper, for example.

5. Clean the lid (3), cutting blades (5), emulsifying disc (6) and glass bowl (7). For more on this, please

refer to the "Maintenance / cleaning" section on page 14.

After use

After use, clean the Mini Chopper as described in the "Maintenance / cleaning" section below. Then store

the Mini Chopper in a safe place away from dust.

Maintenance / cleaning

It is recommended that you clean the Mini Chopper before first use and immediately after each use so

that no remnants of food can set in the glass bowl (7) and on the cutting blades (5) or the emulsifying

disc (6).

SilverCrest SMZG500 A1

English - 15

Risk of electric shock!



Always remove the mains plug from the socket before cleaning. Failure to do so could

cause an electric shock.



Do not pour or spray any liquids onto the motor unit (2) and do not immerse it in water

or other liquids. This could cause short circuits which could cause electric shocks or burns.

Warning about property damage

Do not use abrasive or astringent detergents or tools which could scratch the surface of the

motor unit (2). This could cause damage to the motor unit (2) housing.

Clean the motor unit (2), the plastic non-slip ring (9) and the power cable (4) with a dry or damp cloth.

You can wash up the lid (3), the glass bowl (7), the cutting blades (5) and the emulsifying disc (6)

normally or put them in the dishwasher.

Risk of injury

The cutting blades (5) are extremely sharp. Be very careful when washing and handling the

cutting blades (5).

Storing the Mini Chopper

Store the Mini Chopper in a safe place away from dust. It is best to keep it assembled and leave the

cutting blades (5) and emulsifying disc (6) in the glass bowl (7). This keeps all the individual parts to hand

so they do not get lost and keeps the cutting blade (5) safely stored away so that nobody can

accidentally cut themselves.

SilverCrest SMZG500 A1

16 - English

Troubleshooting

If your Mini Chopper does not work as normal, follow the instructions below to try to solve the problem. If

working through the tips below does not fix the fault, please contact our hotline (see "Warranty

information" on page 17).

Risk of electric shock!

Never try to repair the device yourself.

Problem Possible causes Remed

y

Mini Chopper not

working

Mains plug not connected Connect the power cable (4) to a live mains

socket.

Motor unit (2) not fitted

correctly to lid (3)

Place the motor unit (2) properly on to the lid

(3). See steps 7 to 9 in the section on "Setting

up and filling the Mini Chopper" on page 11.

The cutting blades

(5) or emulsifying

disc (6) are turning

slowly or not at all.

Cutting blades (5) or

emulsifying disc (6) are

blocked or the food is too

tough.

Remove any solid objects from the glass

bowl (7).

If necessary, add a little liquid to the glass

bowl (7).

Check that you have assembled the Mini

Chopper correctly.

Environmental regulations and disposal information

If this symbol depicting a crossed-out rubbish bin appears on a product, the product is

subject to European Directive 2012/19/EU. All electrical and electronic devices must

be disposed of separately from household waste at official disposal centres.

Do not dispose of the appliance in household waste or bulky waste collections.

Information on collection points and pick-up times can be obtained from your local

council or waste disposal company.

Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can be taken to

paper recycling centres or public collection points for recycling. Any film or plastic contained in the

packaging should be taken to your public collection points for disposal.

SilverCrest SMZG500 A1

English - 17

Conformity

This device complies with the basic and other relevant requirements of the EMC

Directive 2004/108/EC, the Low-voltage Directive 2006/95/EC, the ErP Directive

2009/125/EC and the RoHS Directive 2011/65/EU. The corresponding

Declaration of Conformity can be found at the end of this User Manual.

Warranty Information

Dear Customer,

This device is sold with three years warranty from the date of purchase. In the event of product defects,

you have legal rights towards the seller. These statutory rights are not restricted by our warranty as

described below.

Warranty conditions

The warranty period commences upon the date of purchase. Please keep the original receipt in a safe

place as it is required as proof of purchase. If any material or manufacturing faults occur within three

years of purchase of this product, we will repair or replace the product free of charge as we deem

appropriate.

Warranty period and legal warranty rights

The warranty period is not extended in the event of a warranty claim. This also applies to replaced and

repaired parts. Any damage or defects discovered upon purchase must be reported immediately when the

product has been unpacked. Any repairs required after the warranty period will be subject to charge.

Scope of warranty

The device was carefully manufactured in compliance with stringent quality guidelines and subjected to

thorough testing before it left the works. The warranty applies to material and manufacturing faults. This

warranty does not cover product components which are subject to normal wear and which can therefore

be regarded as wearing parts, or damage to fragile components such as switches, rechargeable batteries

or components made of glass. This warranty is void if the product is damaged, incorrectly used or

serviced. To ensure correct use of the product, always comply fully with all instructions contained in the

user manual. The warnings and recommendations in the user manual regarding correct and incorrect use

and handling of the product must always be observed and complied with. The product is solely designed

for private use and is not suitable for commercial applications. The warranty is rendered void in the event

of incorrect handling and misuse, if it is subjected to force, and also if any person other than our

authorised service technicians interfere with the device. No new warranty period commences if the

product is repaired or replaced.

SilverCrest SMZG500 A1

18 - English

Submitting warranty claims

To ensure speedy handling of your complaint, please note the following:

- Before using your product for the first time, please read the enclosed documentation carefully.

Should any problems arise which cannot be solved in this way, please call our hotline.

- Always have your receipt, the product article number as well as the serial number (if available)

to hand as proof of purchase.

- If it is not possible to solve the problem on the phone, our hotline support staff will initiate further

servicing procedures depending on the fault.

Service

Phone: 0207 – 36 50 744

E-Mail: [email protected]

Phone: 01 – 242 15 83

E-Mail: [email protected]

Phone: 800 – 62 175

E-Mail: [email protected]

Phone: 800 – 92 496

E-Mail: [email protected]

IAN: 111635

Manufacturer

Please note that the following address is not a service address. First contact the service point stated above.

TARGA GmbH

Coesterweg 45

59494 SOEST

GERMANY

Pagina se încarcă ...

Silvercrest SMZG 500 A1 User Manual And Service Information

Acest manual este potrivit și pentru

Silvercrest SMZG 500 A1 User Manual And Service Information

Lucrări conexe

Alte documente