Silvercrest 11635 User Manual And Service Information

Tip
User Manual And Service Information

Acest manual este potrivit și pentru

English ........................................................................................................................ 2
Hrvatski ................................................................................................................... 19
Română ................................................................................................................... 37
Български ................................................................................................................ 57
Ελληνικά .................................................................................................................. 77
Deutsch ..................................................................................................................... 97
V 1.2
SilverCrest SMZG500 A1
2 - English
Contents
Introduction ................................................................................................................ 3
Intended use ............................................................................................................... 3
Predictable misuse ........................................................................................................................................... 3
Package Contents ....................................................................................................... 4
Controls ...................................................................................................................... 4
Technical specifications ............................................................................................... 5
Safety instructions ...................................................................................................... 5
Before you start ....................................................................................................... 11
Getting started ......................................................................................................... 11
Use ........................................................................................................................... 11
Preparing food .............................................................................................................................................. 11
Setting up and filling the Mini Chopper...................................................................................................... 11
Switching on / selecting speed ................................................................................................................... 12
Recommended speeds ................................................................................................................................. 13
Removing the chopped food / whipped cream ......................................................................................... 14
After use ................................................................................................................... 14
Maintenance / cleaning .............................................................................................................................. 14
Storing the Mini Chopper .......................................................................................... 15
Troubleshooting ....................................................................................................... 16
Environmental regulations and disposal information ............................................... 16
Conformity ............................................................................................................... 17
Warranty Information .............................................................................................. 17
SilverCrest SMZG500 A1
English - 3
Introduction
Thank you for buying a SilverCrest product.
The SMZG500 A1 Mini Chopper, hereinafter the Mini Chopper, can be used for chopping, mixing and
crushing food and ice cubes and for whipping cream.
Intended use
This Mini Chopper is not intended for commercial use.
This Mini Chopper is suitable exclusively for use indoors, in dry, sealed spaces.
Make sure that the Mini Chopper is always positioned securely.
The Mini Chopper fulfils all relevant norms and standards associated with CE Conformity. Any
modifications to the appliance other than recommended changes by the manufacturer may result in these
standards no longer being met.
Predictable misuse
The Mini Chopper may not be used for crushing or chopping hot
or boiling foods.
The Mini Chopper may not be used to crush bones, frozen food
(with the exception of ice cubes and frozen berries), coffee
beans, grains or nutmeg.
Non-food substances should also not be processed.
SilverCrest SMZG500 A1
4 - English
Package contents
Motor unit with power cable and plug
Glass container
Lid for glass container with sealing ring
Cutting blades
Emulsifying disc
Plastic non-slip ring
This user manual
Controls
These operating instructions have a fold-out cover. On the inside of the cover, the Mini Chopper is
depicted with a numbered key. The meanings of the numbers are as follows:
1 Buttons for speed I / II
2 Motor unit
3 Lid
4 Power cable and plug
5 Cutting blades
6 Emulsifying disc
7 Glass bowl with 1,000 ml capacity and max. fill level of 500 ml
8 Stainless steel guide pin
9 Plastic non-slip ring
10 Fill level indicator and MAX marking at 500 ml
SilverCrest SMZG500 A1
English - 5
Technical specifications
Model name: SilverCrest SMZG500 A1
Operating voltage: 220 - 240 V, 50/60 Hz
Power: max. 500 W
Speed levels: 2
Power cable length: approx. 100 cm
Dimensions: height approx. 24 cm, diameter approx. 17 cm
Weight incl. accessories: approx. 1,715 g
Max. fill level: 500 ml
SO time*: with cutting blades: 30 seconds
with emulsifying disc: 2 minutes
Protection Class II
* The short operating time (SO time) is the maximum permitted continuous operating time without the
electric motor overheating and potentially being damaged. After this operating period, you must switch off
the Mini Chopper and wait for the motor to cool down to ambient temperature.
Safety instructions
Before you use this appliance for the first time, please read the
following notes in this manual and heed all warnings, even if you
are familiar with handling electronic devices and household
appliances. Keep these operating instructions in a safe place for
future reference. If you sell the appliance or give it away, pass on
the user manual at the same time. It forms parts of the product.
SilverCrest SMZG500 A1
6 - English
Explanation of symbols
In this user manual, warnings are used as follows. Where
applicable, some of these symbols are affixed to the product itself in
order to alert the user to potential risks.
WARNING!
This symbol denotes important information for the safe
operation of the product and user safety. It warns against
risks which could, if left unheeded, cause danger to life and
limb, injuries or material damage.
Risk of electric shock!
This symbol warns of risks which could, if left unheeded,
cause damage to life and limb through electric shock.
Risk of fire!
This symbol warns that fires could start if the warning is left
unheeded.
This symbol denotes further information on the topic.
Children and persons with disabilities
This appliance is not to be used by children. The appliance and its
power cable (4) should be kept out of the reach of children. The
appliance may be used by persons with reduced physical, sensory
or mental capabilities and/or who have no experience in, or
knowledge of, using such appliances providing they are supervised
or have been instructed in how to use the appliance safely and
SilverCrest SMZG500 A1
English - 7
have understood the associated risks. Do not allow children to play
with the appliance.
WARNING of suffocation!
Packaging material is not a toy. Do not allow children to
play with plastic bags. There is a risk of suffocation.
WARNING of falling objects!
Make sure that children cannot pull the device from the work
surface by the power cable (4). There is a danger of injury.
Keep the appliance out of the reach of children.
General safety instructions
Risk of electric shock!
If the power cable (4) of this appliance is damaged, it
must be replaced by the manufacturer, its customer
service or a similarly qualified person, in order to avoid
any possible danger.
Never open the housing of the Mini Chopper. This does
not contain any replaceable parts. Opening the housing
can expose you to the risk of electric shock.
If you notice any smoke, unusual noises or strange
smells, switch off the appliance immediately and remove
the plug from the mains socket. If this occurs, do not
continue to use the appliance and have it checked out by
an expert. Never inhale smoke from a possible
appliance fire. If you do inadvertently inhale smoke, seek
SilverCrest SMZG500 A1
8 - English
medical attention. Smoke inhalation can be damaging to
your health.
Make sure that the power cable (4) cannot be damaged
by sharp edges or hot spots.
Make sure that the power cable (4) cannot get crushed
or squashed.
The appliance must always be disconnected from the
mains when left unsupervised and before assembly,
disassembly or cleaning.
When disconnecting the power cable (4) from the mains
socket, always pull on the mains plug and never on the
power cable (4) itself.
If you notice visible damage to the Mini Chopper or the
power cable (4), switch off the device, remove the mains
plug from the mains socket, and contact customer service
(see "Warranty information" on page 17).
Only connect the Mini Chopper to a properly installed,
easily accessible mains socket with the same mains
voltage as detailed on the name plate. After connecting
the appliance, the mains socket must still be easily
accessible so that you can remove the mains plug quickly
in the event of an emergency.
Never immerse the motor unit (2), the power cable (4) or
the mains plug in water or other liquids. If liquid does
penetrate the motor unit (2), disconnect the mains plug
SilverCrest SMZG500 A1
English - 9
from the mains socket immediately and contact customer
service (see "Warranty information" on page 17).
Never operate the Mini Chopper with wet hands.
Warning about property damage
Do not leave the Mini Chopper unattended while running
so you can react quickly in the case of hazards.
If the cutting blades (5) or the emulsifying disc (6) only
turn slowly or not at all, switch the Mini Chopper off
immediately, disconnect the power cable (4) from the
mains socket and check whether the cutting blades (5) or
the emulsifying disc (6) are blocked or the food is too
tough. Also check that you have assembled the Mini
Chopper correctly.
Please note the maximum fill level of 500 ml - see the fill
level indicator (10).
The Mini Chopper has a plastic non-slip ring (9). If
necessary, place something underneath the device, as
work-surfaces are sometimes treated with detergents
which could attack or even dissolve the plastic non-slip
ring (9).
Risk of overheating and fire
Only ever operate the Mini Chopper with the glass bowl
(7) filled and never empty.
SilverCrest SMZG500 A1
10 - English
If you wish to whip cream, fill the glass bowl (7) with
cream to at least the 200 ml level.
Note the SO times (short operating times). See the
technical specifications on page 5.
Do not use the appliance in direct sunlight or near
heating appliances (heaters, stoves, ovens etc.).
Do not place hot or boiling foods in the glass bowl (7).
Otherwise the motor unit (2) could overheat or the glass in
the bowl (7) could crack. Always allow hot or boiling
foods to cool down first before adding them to the glass
bowl (7) and processing them with the Mini Chopper.
Risk of injury
Before changing accessories or fittings which move when
the unit is running, switch it off and disconnect it from the
mains socket.
Never open the lid (3) or remove the motor unit (2) while
the Mini Chopper is running. Otherwise, rotating bits of
food may be thrown out with great force.
The cutting blades (5) are extremely sharp. Be very
careful when washing and handling the cutting
blades (5).
The cutting blades (5) continue to turn immediately after
being switched off. Wait for the cutting blades (5) to
come to a complete standstill before removing the motor
unit (2), opening the lid (3) or taking other steps.
SilverCrest SMZG500 A1
English - 11
Before you start
Unpack the appliance. First check whether all the parts are complete and undamaged. If any items are
missing or damaged, please phone our hotline (see "Warranty information" on page 17). Keep the
packaging material away from children and dispose of appropriately.
Getting started
Before using the device for the first time, clean the lid (3), cutting blades (5), emulsifying disc (6) and glass
bowl (7). For more on this, please refer to the "Maintenance / cleaning" section on page 14.
Use
Preparing food
Wash the food.
For meat, remove tendons, bones and skin.
For herbs, remove the stalks.
Cut solid food (e.g. meat, fish, vegetables) into chunks of around 2 to 3 cm square.
Remove the outer shell of nuts.
Cream should be kept as cool as possible so it whips better.
Setting up and filling the Mini Chopper
1. If the power cable (4) is connected to the mains socket, disconnect it from the mains socket.
2. Place the plastic non-slip ring (9) on an even, dry surface.
3. Place the glass bowl (7) on the plastic non-slip ring (9). Make sure that it is centred on the plastic
non-slip ring (9) and the edges of the plastic non-slip ring (9) are not bent.
If you wish to chop or mix food, insert the cutting blades (5). Use the emulsifying disc (6) to
prepare whipped cream.
4. Depending on what you wish to prepare, place the cutting blades (5) or the emulsifying disc (6) on
the stainless steel guide pin (8).
5. Prepare the food (see previous section).
6. Fill the glass bowl (7) with the food to be processed. Note the recommendations (see page 13) and
never overfill the glass bowl (7) beyond the maximum 500 ml level - see fill level indicator (10).
7. Place the lid (3) on to the glass bowl (7). When doing so, make sure that the thinner cylinder on the
axle (see arrow) is protruding slightly through the hole in the middle of the lid (3).
SilverCrest SMZG500 A1
12 - English
8. Hold the glass bowl (7) in one hand and the lid (3) in the other and twist them gently against one
another to check they are fitted firmly and properly.
9. Place the motor unit (2) on to the lid (3). Hold the motor unit (2) in one hand and the lid (3) in the
other and twist them gently against one another. The motor unit (2) should rest in the two curved
recesses in the lid (3) and it should no longer be possible to twist it. It sinks down slightly when
properly fitted.
Warning!
Make sure the power cable (4) is not in your working area. Otherwise, you could accidentally
pull on it and tip over the Mini Chopper or cause the motor unit (2) to fall off the glass
bowl (7).
Switching on / selecting speed
The Mini Chopper can only be switched on once the motor unit (2) is properly locked into
position on the lid (3).
Warning!
Hold the motor unit (2) firmly in place with one hand and the glass bowl (7) with the other
when using the device to ensure the contents are not thrown out.
1. Connect the power cable (4) to a live mains socket.
2. Hold the motor unit (2) firmly and use your thumb to press the I or II button for the speed (1) you
want. See the recommendations on page 13.
Warning!
Note the SO times (short operating times) for the cutting blades (5) and the emulsifying
disc (6)
.
See the technical specifications on page 5.
SilverCrest SMZG500 A1
English - 13
3. Release the button for the speed (1) to switch off the Mini Chopper.
Risk of injury
The cutting blades (5) continue to turn immediately after being switched off. Wait for the
cutting blades (5) to come to a complete standstill before removing the motor unit (2), opening
the lid (3) or taking other steps.
Recommended speeds
The table below sets out the recommended quantities, speeds and processing times for various foods.
The quantities and times listed are guidelines to achieve the best possible results for the
relevant ingredients. The values can vary based on consistency.
Ingredients Recommended
quantity
Recommended time Recommended
speed
Almonds 200 g coarse 1 x 10 sec.
fine 3 x 10 sec.
inc. breaks
Speed II
Cloves of garlic 50 g pulsing
10 x 1 sec.
Speed II
Onions, coarse
(quartered, approx.
10 g)
150 g pulsing 4 x 1 sec.
break
pulsing 4 x 1 sec.
Speed I
Onions, fine
(quartered, approx.
10 g)
150 g pulsing 5 x 1 sec.
break
pulsing 5 x 1 sec.
Speed II
Diced meat
(approx. 2 x 2 cm)
250 g 6 x 5 sec.
inc. breaks
Speed II
Diced cheese, e.g.
Gouda
(cooled, approx. 2 x
2 cm)
100 g 2 x 5 sec.
inc. breaks
Speed II
200 g 3 x 5 sec.
inc. breaks
Speed II
Carrots
(in approx. 2 cm
pieces)
200 g coarse 1 x 5 sec.
fine 2 x 5 sec.
inc. breaks
Speed I
SilverCrest SMZG500 A1
14 - English
Ice cubes 100 g pulsing
coarse 10 x 1 sec.
fine 20 x 1 sec.
Speed II
Cream* min. 200 ml 1 x 40 sec. Speed I
* Use the emulsifying disc (6) provided for whipping cream. The processing time until the desired
consistency of cream is reached can vary based on the fat content. Please also note the maximum fill level
of 500 ml also applies to cream.
The breaks set out in the list give the ingredients the chance to come back into contact with the
cutting blades (5). If the ingredients get stuck to the inside of the glass bowl (7), push them
down with a scraper, for example, and continue chopping.
Removing the chopped food / whipped cream
1. Unplug the mains plug (4) from the mains socket.
2. Remove the motor unit (2) and the lid (3).
3. Remove the cutting blades (5) or the emulsifying disc (6) from the glass bowl (7).
Risk of injury
The cutting blades (5) are extremely sharp. Be very careful when handling the cutting
blades (5).
4. Remove the food. You can use a scraper, for example.
5. Clean the lid (3), cutting blades (5), emulsifying disc (6) and glass bowl (7). For more on this, please
refer to the "Maintenance / cleaning" section on page 14.
After use
After use, clean the Mini Chopper as described in the "Maintenance / cleaning" section below. Then store
the Mini Chopper in a safe place away from dust.
Maintenance / cleaning
It is recommended that you clean the Mini Chopper before first use and immediately after each use so
that no remnants of food can set in the glass bowl (7) and on the cutting blades (5) or the emulsifying
disc (6).
SilverCrest SMZG500 A1
English - 15
Risk of electric shock!
Always remove the mains plug from the socket before cleaning. Failure to do so could
cause an electric shock.
Do not pour or spray any liquids onto the motor unit (2) and do not immerse it in water
or other liquids. This could cause short circuits which could cause electric shocks or burns.
Warning about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface of the
motor unit (2). This could cause damage to the motor unit (2) housing.
Clean the motor unit (2), the plastic non-slip ring (9) and the power cable (4) with a dry or damp cloth.
You can wash up the lid (3), the glass bowl (7), the cutting blades (5) and the emulsifying disc (6)
normally or put them in the dishwasher.
Risk of injury
The cutting blades (5) are extremely sharp. Be very careful when washing and handling the
cutting blades (5).
Storing the Mini Chopper
Store the Mini Chopper in a safe place away from dust. It is best to keep it assembled and leave the
cutting blades (5) and emulsifying disc (6) in the glass bowl (7). This keeps all the individual parts to hand
so they do not get lost and keeps the cutting blade (5) safely stored away so that nobody can
accidentally cut themselves.
SilverCrest SMZG500 A1
16 - English
Troubleshooting
If your Mini Chopper does not work as normal, follow the instructions below to try to solve the problem. If
working through the tips below does not fix the fault, please contact our hotline (see "Warranty
information" on page 17).
Risk of electric shock!
Never try to repair the device yourself.
Problem Possible causes Remed
y
Mini Chopper not
working
Mains plug not connected Connect the power cable (4) to a live mains
socket.
Motor unit (2) not fitted
correctly to lid (3)
Place the motor unit (2) properly on to the lid
(3). See steps 7 to 9 in the section on "Setting
up and filling the Mini Chopper" on page 11.
The cutting blades
(5) or emulsifying
disc (6) are turning
slowly or not at all.
Cutting blades (5) or
emulsifying disc (6) are
blocked or the food is too
tough.
Remove any solid objects from the glass
bowl (7).
If necessary, add a little liquid to the glass
bowl (7).
Check that you have assembled the Mini
Chopper correctly.
Environmental regulations and disposal information
If this symbol depicting a crossed-out rubbish bin appears on a product, the product is
subject to European Directive 2012/19/EU. All electrical and electronic devices must
be disposed of separately from household waste at official disposal centres.
Do not dispose of the appliance in household waste or bulky waste collections.
Information on collection points and pick-up times can be obtained from your local
council or waste disposal company.
Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can be taken to
paper recycling centres or public collection points for recycling. Any film or plastic contained in the
packaging should be taken to your public collection points for disposal.
SilverCrest SMZG500 A1
English - 17
Conformity
This device complies with the basic and other relevant requirements of the EMC
Directive 2004/108/EC, the Low-voltage Directive 2006/95/EC, the ErP Directive
2009/125/EC and the RoHS Directive 2011/65/EU. The corresponding
Declaration of Conformity can be found at the end of this User Manual.
Warranty Information
Dear Customer,
This device is sold with three years warranty from the date of purchase. In the event of product defects,
you have legal rights towards the seller. These statutory rights are not restricted by our warranty as
described below.
Warranty conditions
The warranty period commences upon the date of purchase. Please keep the original receipt in a safe
place as it is required as proof of purchase. If any material or manufacturing faults occur within three
years of purchase of this product, we will repair or replace the product free of charge as we deem
appropriate.
Warranty period and legal warranty rights
The warranty period is not extended in the event of a warranty claim. This also applies to replaced and
repaired parts. Any damage or defects discovered upon purchase must be reported immediately when the
product has been unpacked. Any repairs required after the warranty period will be subject to charge.
Scope of warranty
The device was carefully manufactured in compliance with stringent quality guidelines and subjected to
thorough testing before it left the works. The warranty applies to material and manufacturing faults. This
warranty does not cover product components which are subject to normal wear and which can therefore
be regarded as wearing parts, or damage to fragile components such as switches, rechargeable batteries
or components made of glass. This warranty is void if the product is damaged, incorrectly used or
serviced. To ensure correct use of the product, always comply fully with all instructions contained in the
user manual. The warnings and recommendations in the user manual regarding correct and incorrect use
and handling of the product must always be observed and complied with. The product is solely designed
for private use and is not suitable for commercial applications. The warranty is rendered void in the event
of incorrect handling and misuse, if it is subjected to force, and also if any person other than our
authorised service technicians interfere with the device. No new warranty period commences if the
product is repaired or replaced.
SilverCrest SMZG500 A1
18 - English
Submitting warranty claims
To ensure speedy handling of your complaint, please note the following:
- Before using your product for the first time, please read the enclosed documentation carefully.
Should any problems arise which cannot be solved in this way, please call our hotline.
- Always have your receipt, the product article number as well as the serial number (if available)
to hand as proof of purchase.
- If it is not possible to solve the problem on the phone, our hotline support staff will initiate further
servicing procedures depending on the fault.
Service
Phone: 0207 – 36 50 744
Phone: 01 – 242 15 83
Phone: 800 – 62 175
Phone: 800 – 92 496
IAN: 111635
Manufacturer
Please note that the following address is not a service address. First contact the service point stated above.
TARGA GmbH
Coesterweg 45
59494 SOEST
GERMANY
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118

Silvercrest 11635 User Manual And Service Information

Tip
User Manual And Service Information
Acest manual este potrivit și pentru