Citizen CX-02 Manual de utilizare

Marca: Citizen

Model: CX-02

Categorie: Imprimante de etichete

Tip: Manual de utilizare

Acest manual este potrivit și pentru

CX-02W

Version 1.20

User’s Manual

DIGITAL PHOTO PRINTER

CX-02

Series

CX-02W

Series

- 2 -

WA R NING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To

avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

This apparatus must be earthed.

For pluggable equipment, the socket-outlet be installed near the equipment and shall be easily

accessible.

To disconnect the main power, unplug the AC IN connector.

This unit has no power switch.

When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or

connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur

during operation of the unit, operate the disconnect device to switch the power supply off, or

disconnect the power plug.

Warning on power connection

Use a proper power cord for your local power supply.

1. Use the approved Power Cord (3-core mains lead) /Appliance Connector / Plug with earthing-

contacts that conforms to the safety regulations of each country if applicable.

2. Use the Power Cord (3-core mains lead) / Appliance Connector /Plug conforming to the proper

ratings (Voltage, Ampere).

If you have questions on the use of the above Power Cord/Appliance Connector/Plug, please consult

a qualified service personnel or the distributor.

For the Customers in Europe

The intention of the flyer (as a part of Instruction) and request to customers

This product has complied with the Radio Equipment Directive 2014/53/EU.

We CSJ will switch to the EU declaration of conformity for this directive

before June 13, 2017.

This directive requires the following contents in the instruction.

Therefore, please keep this flyer with your manual(s) as a part of the instruction.

[This directive requirement]

English

Hereby, [CITIZEN SYSTEMS JAPAN Co., Ltd. ] declares that the radio equipment type CX-02/CX-

02W is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

Frequency band in which the radio equipment operates; 13.56 MHz±7 kHz

Maximum radio-frequency power transmitted in the frequency band in which the radio

equipment operates; 40.6 dBμV/m at 3 m

français

Le soussigné, [CITIZEN SYSTEMS JAPAN Co., Ltd. ], déclare que l'équipement radioélectrique du

type

CX-02/CX-02W

est conforme à la directive 2014/53/UE.

Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

Bande de fréquences utilisées par l'équipement radioélectrique; 13.56 MHz±7 kHz

puissance de radiofréquence maximale transmise sur les bande de fréquences utilisées par

l'équipement radioélectrique; 40.6 dBμV/m at 3 m

- 3 -

espagnol

Por la presente, [CITIZEN SYSTEMS JAPAN Co., Ltd. ] declara que el tipo de equipo radioeléctrico

CX-02/CX-02W

es conforme con la Directiva 2014/53/UE.

El texto completo de la declaración UE de conformidad está disponible en la dirección Internet

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

Banda o bandas de frecuencia en las que opera el equipo radioeléctrico; 13.56 MHz±7 kHz

Potencia máxima de radiofrecuencia transmitida en la banda o bandas de frecuencia en las que

opera el equipo

radioeléctrico; 40.6 dBμV/m at 3 m

Deutsch

Hiermit erklärt [CITIZEN SYSTEMS JAPAN Co., Ltd. ], dass der Funkanlagentyp

CX-02/CX-02W

der Richtlinie 2014/53/EU entspricht.

Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse

verfügbar:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

das Frequenzband in dem bzw. denen die Funkanlage betrieben wird;13.56 MHz±7 kHz

die in dem Frequenzband in dem bzw. denen die Funkanlage betrieben wird, abgestrahlte

maximale Sendeleistung; 40.6 dBuV/m at 3 m

italiano

Il fabbricante, [CITIZEN SYSTEMS JAPAN Co., Ltd.], dichiara che il tipo di apparecchiatura radio

CX-02/CX-02W

è conforme alla direttiva 2014/53/UE.

Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

български

С настоящото [CITIZEN SYSTEMS JAPAN Co., Ltd.] декларира, че този тип радиосъоръжение

CX-02/CX-02W

е в съответствие с Директива 2014/53/ЕС.

Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет

адрес:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

čeština

Tímto [CITIZEN SYSTEMS JAPAN Co., Ltd.] prohlašuje, že typ rádiového zařízení

CX-02/CX-02W

je v souladu se směrnicí 2014/53/EU.

Úplné znění EU prohlášení o shodě je k dispozici na této internetové adrese:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

dansk

Hermed erklærer [CITIZEN SYSTEMS JAPAN Co., Ltd.], at radioudstyrstypen

CX-02/CX-02W

er I

overensstemmelse med direktiv 2014/53/EU.

EU-overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

magyar

[CITIZEN SYSTEMS JAPAN Co., Ltd.] igazolja, hogy a

CX-02/CX-02W

típusú rádióberendezés

megfelel a 2014/53/EU irányelvnek.

Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

- 4 -

Nederlands

Hierbij verklaar ik, [CITIZEN SYSTEMS JAPAN Co., Ltd.], dat het type radioapparatuur

CX-02/CX-

02W

conform is met Richtlijn 2014/53/EU.

De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende

internetadres:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

polski

[CITIZEN SYSTEMS JAPAN Co., Ltd.] niniejszym oświadcza, że typ urządzenia radiowego

CX-02/

CX-02W

jest zgodny z dyrektywą 2014/53/UE.

Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

português

O(a) abaixo assinado(a) [CITIZEN SYSTEMS JAPAN Co., Ltd.] declara que o presente tipo de

equipamento de rádio

CX-02/CX-02W

está em conformidade com a Diretiva 2014/53/UE.

O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

Română

Prin prezenta, [CITIZEN SYSTEMS JAPAN Co., Ltd.] declară că tipul de echipamente radio

CX-02/

CX-02W

este în conformitate cu Directiva 2014/53/UE.

Textul integral al declarației UE de conformitate este disponibil la următoarea adresă internet:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

suomi

[CITIZEN SYSTEMS JAPAN Co., Ltd.] vakuuttaa, että radiolaitetyyppi

CX-02/CX-02W

direktiivin 2014/53/EU mukainen.

EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa

internetosoitteessa:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

svenska

Härmed försäkrar [CITIZEN SYSTEMS JAPAN Co., Ltd.] att denna typ av radioutrustning

CX-02/

CX-02W

överensstämmer med direktiv 2014/53/EU.

Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress:

http://www.citizen-systems.co.jp/english/support/download/printer/others/eu_doc/

- 5 -

Table of Contents

Introduction � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6

For Safe Operation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6

Caution for installation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9

Regulatory compliance statements � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10

Printer Installation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �11

Checking the contents � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �11

Name of components � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12

Connecting the power cord and a computer � � � � � � � � � � � � � � � � � � � � � � � � 13

Paper (Paper Holder), Ribbon (Ribbon Cassette) � � � � � � � � � � � � � � � � � � � 14

Setting the media (paper, ribbon) � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15

Paper tray installation (CX-02 Series) � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20

Disposing of paper scrap � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21

Troubleshooting � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22

Error display � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22

Solving errors � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23

The printer is jammed with paper � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23

The ribbon is caught in the printer � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25

The printer stopped with the paper partially cut � � � � � � � � � � � � � � � � � � 26

The power has been cut during printing � � � � � � � � � � � � � � � � � � � � � � � � 26

Cleaning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27

Platen roller � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27

Thermal print head � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 28

Specications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 29

Safety precautions

Note that the contents of directions for use and safety precautions correspond to the safety

standards as of the time this manual has been created�

Remodeling

For safety, do not remodel this product after purchase�

Copyrights, trademarks or any other intellectual property rights whatsoever that pertain to

documents, programs or other items provided with this product, are ascribed to CITIZEN

SYSTEMS JAPAN CO�, LTD, or the respective other holders of rights� Except in cases permitted

by applicable laws, these may not be duplicated or used without consent from CITIZEN SYSTEMS

JAPAN CO�, LTD

About CX-02 Series

CX-02 Series includes CX-02, CX-02 (A), and CX-02 (S). The model name diers depending on

the shipping destination and media used�

About CX-02W Series

CX-02W Series includes CX-02W and CX-02W (A)� The model name differs depending on the

shipping destination�

About the product destination

CX-02/CX-02(S)/CX-02W without (A) to indicate the destination are not for resale/use in the U�S�

Concerning the model names

Model Name Details

CX-02/CX-02 (A)/CX-02W/CX-02W (A) Standard Media Model

CX-02 (S) Sticker Media Model

Please use dedicated media for each model�

- 6 -

Thank you for purchasing this product�

This document explains how to handle and operate this product�

Please read this document carefully before use�

Be sure to read “For Safe Operation” (P�6-8), and operate the product correctly�

Be sure to read this document before using the product� After reading, keep it in a safe place where

it can be easily accessed as needed�

The warnings listed here are to ensure proper use of the prod uct, to prevent physical injury to the

customer or other persons, and to prevent property damage� Please follow these warnings�

Warnings and Cautions

The possible levels of injury or damage due to misuse are categorized below as Warnings and

Cautions, according to the degree of danger involved�

Warning

Accidents caused by failure to heed the warnings accompanying this

symbol may lead to serious or fatal injury�

Caution

Accidents caused by failure to heed the cautions accompanying this

symbol may lead to physical injury or property damage�

Symbols

The symbols shown have the following meanings:

This symbol indicates warning and caution messages�

The warning content is indicated in or near the symbol�

This symbol indicates prohibited actions�

The prohibited action is indicated in or near the symbol�

This symbol indicates necessary actions or instructions�

The action is indicated in the symbol�

Introduction

For Safe Operation

- 7 -

Warning

• This unit has no power switch� When installing the unit, incorporate a readily

accessible disconnect device in the fixed wiring, or connect the power plug to an

easily accessible socket-outlet near the unit� If a fault should occur during operation

of the unit, operate the disconnect device to switch the power supply off, or

disconnect the power plug�

• Use the product only with the designated voltage and frequency� Improper

connection may cause electric shock or re.

• Avoid connecting too many devices to the outlet used for this product and using

extension cords. The outlet may overheat and cause a re.

• Do not damage, cut, bundle, or alter the power cord� Also, the cord may be damaged

if heavy objects are placed on it, or if pulled or bent with excessive force, and it may

cause a re.

• Do not install the product in places with salinity or corrosive gases in the air� This

may cause a re.

• Do not block the vents of the product� Heat may build up in the product and cause a

malfunction or re.

• Do not stand on or place heavy objects on the product� Also, do not apply excessive

force on the buttons, switches, terminals, etc� This may damage the product and

cause injury to the user or other people�

• Store the bag of the product out of the reach of children. It may cause suocation if

placed over the head�

• Be careful not to injure yourself or damage other things on the edges of the product�

• Do not use this product for applications involving human life (such as medical, space,

aeronautic, or other applications that require extreme reliability)�

• CX-02 Series weighs approximately 12 kg (26�46 lbs�) and CX-02W Series weighs

approximately 14 kg (30�86 lbs�)� When moving it, lift it in a way that avoids

excessive physical stress� Lifting recklessly or dropping the product may cause

physical injury�

• Place the product as close to an outlet as possible to be able to easily unplug the

power cord in case of problem�

• If there is dust on the plug, clean it o thoroughly. It may cause an electric shock or a

short circuit�

• If metal objects or liquids have fallen into the product, or if there is smoke, a strange

odor, or any other abnormality, immediately unplug the power cord, and then contact

a service representative� Do not continue using the product if it is damaged or not

operating properly� This may cause an electrical shock, a short circuit, a fire, or

damage the product�

• Be sure to ground the product� Otherwise, a short circuit may occur, causing an

electric shock or re.

• Do not plug or unplug the cord with wet hands� This may cause an electric shock�

• Do not open the product, disassemble internal parts, or modify the product� It may

cause an electric shock, re, or injury, or a product malfunction. For internal check-

ups, adjustments, or repair, please contact a service representative�

For Safe Operation

- 8 -

Caution

• Do not install the product in dusty or humid places. This may cause re or an electric

shock, or damage the product�

• Do not install the product on an unstable surface� It may fall and cause injury to the

user or other people�

• Do not allow foreign objects to enter into the product� They may cause an electric

shock, a short circuit, a fire, or damage the product� If something falls into the

product, immediately unplug the power cord, and then call a service representative�

• Do not open the cover while printing� This may damage the product�

• Do not spill or spray liquids or chemicals onto the product�

• When cleaning the cover, do not use thinner, trichloroethane, benzene, ketone-based

cleaners, or chemically treated cloths� They could discolor or deteriorate the cover�

• At least once a year, unplug the power cord, and clean the prongs and the plug� If

dust accumulates, it may cause a re.

• When printing continuously for long periods in a small room, be sure to ventilate the

room properly�

• If you intend to use the product on a transportation vehicle (train, truck, ship, etc�),

please talk to a representative in advance�

• When disposing of the product, accessories, packaging materials, or media (paper,

ribbon), please abide by local waste removal ordinances� For details, contact your

local government oces.

• When unplugging the cord, always grip the plug� Do not pull on the cord as it may

damage the cord and cause an electric shock or re.

• When moving the product, be sure to unplug the power cord� Otherwise, the cord

may be damaged, which may cause re or an electric shock.

• For safety, when not using the product for an extended period of time, be sure

to unplug the power cord� Otherwise, it may cause an electric shock, fire, or a

malfunction�

• Parts with this warning get extremely hot� Do not touch these parts after printing�

There is a danger of burns�

• Do not touch the gear mechanisms. There is a danger of injury if ngers get caught

in spinning gears�

• There is a cutter inside the paper output so never insert a hand not just, of course,

when the printer is operating but also when it is not�

For Safe Operation

- 9 -

Caution for installation

• Before using the product, read “For Safe Operation” carefully and observe the instructions

therein�

• Use care when moving the product� Never try to carry the product alone� Dropping it may cause

injury or property damage�

• Do not use or store the product near a fire, humid places, in direct sunlight, near an air

conditioner or heater, or any other location with unusually high or low temperature, strong

humidity, or excessive dust�

• Do not place the product where chemical reactions occur, such as in a laboratory�

• Do not install the product where there is salinity or corrosive gas in the air�

• The product must be installed on a rm, level surface where there is ample ventilation.

• Do not put anything on top of the product�

• Do not use the product near a radio or television, and do not use the same wall outlet for the

product and a radio or television� Otherwise radio or television reception may be adversely

aected.

• Do not use a power voltage or a frequency other than those specied.

• Do not put anything on the power cord or step on it�

• Do not drag or carry the product by the power cord or the USB cable�

• Avoid plugging the power cord into an outlet with many other cables connected�

• Do not bundle the power cord�

• Always grip the plug housing, not the cord, to plug or unplug the power cord�

• Always unplug the power cord before connecting or disconnecting the USB cable�

• Avoid using a long USB cable or connecting it to any noise-producing device� If it is unavoidable,

use a shielded cable or twisted pair for each signal�

• Use a shielded USB cable compatible with the USB 2.0 specications.

• Place the product near the outlet where the power cord can be unplugged easily to shut the

power o.

• Use an AC outlet that accepts a three-pronged plug� Otherwise, there may be a danger of

electric shock�

• Do not use the cord set supplied with the printer for other devices�

• Use the cord set supplied for the product�

• This product is not intended for use in the immediate/direct visual eld of the display work place.

To avoid disturbing reections on the display work place, this product shall not be placed in the

immediate/direct eld of vision.

• Use as a network printer is not anticipated�

Any use in conjunction with a network will be the

customer’s sole responsibility�

- 10 -

Regulatory compliance statements

For the Customer in USA

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

Caution: Use shielded cables to connect this computers. Any changes or modifications not expressly

approved by the grantee of this device could void the user’s authority to operate the equipment.

- 11 -

Printer Installation

Check that the printer and all the following accessories are included in the package�

Caution

• Pay particular attention when removing the product from its package, carrying it, or moving

it� Dropping the printer may result in personal injury or property damage�

• Do not lift the printer by grasping the wrapping materials� The materials may break and

cause the printer to fall�

• Do not put your ngers between the paper holders and the L size spacers. Otherwise, you

may get injured�

• The scrap box, paper holder, and ribbon cassette are dedicated parts for each of the CX-02

Series and CX-02W Series respectively� Do not use the ones for the CX-02 Series with the

CX-02W Series and vice versa�

Checking the contents

Printer unit Power cord

Paper tray

Ribbon cassette

*Set in the printer�

Remove the wrapping

before using them�

Scrap box

* The shape diers depending on the

country, region or the application�

*Set in the printer�(for L and PC sizes)

*CX-02W Series only�

Paper holder L size spacer

*CX-02/CX-02 (A) only�

For Safe Operation

Start up guide

Printer Driver User'sManual

Explanation bookletCD-ROM

L size spacers installation (CX-02/CX-02 (A) only)

Install the L size spacers to the paper holders when using L or 2L paper rolls�

*This spacer is not attached in CX-02 (S) model and CX-02W Series�

DIGITAL PHOTO PRINTER

CX-02W

Series

English

Deutsch

français

español

For Safe Operation

Start-up Guide

Sicherheitshinweise

Leitfaden zur Inbetriebnahme

Pour un fonctionnement sans risque

Guide de dém arrage

Para un funcionamiento seguro

Guía de in icio de

中文 - 简体

关于安全操作

入门指南

日本語

安全にお使いいただくために

スタートアップガイド

How to change the paper width of the paper holder.

1 2 3 4

- 12 -

Front of the unit

Back of the unit

Side of the unit

Printer Installation

Caution

• Be careful not to hurt yourself or damage anything on the edges of the printer�

Name of components

Paper output

ON/Standby

switch

Standby

Opening lever

Scrap box

LEDs

Vent

USB port

Power inlet

- 13 -

Make sure that the ON/Standby switch of the

printer unit is set to Standby�

Make sure that the power switch of the

computer is set to OFF�

Plug the connector of the power cord

(supplied) into the printer power inlet�

Plug the power cord into an outlet�

Connect the printer and the computer with a

USB cable�

Set the ON/Standby switch of the printer unit

and the power switch of the computer to ON�

Printer Installation

Caution

• Use the power cable supplied with the printer, and be sure to connect the ground wire�

• Use a shielded USB cable compatible with the USB 2�0 specifications� Otherwise

unexpected troubles may arise�

Connecting the power cord and a computer

Standby

ON/Standby

switch

USB port

Power inlet

- 14 -

Printer Installation

Prepare the media (paper, ribbon) with the following widths�

Paper (Paper Holder), Ribbon (Ribbon Cassette)

Caution

• Set the paper and ribbon without putting them directly on the work surface� If dust or dirt adheres

to the media when setting it inside the printer unit, it may adversely aect the print quality.

CX-02 Series CX-02W Series

Type (5 x 7")

(4 x 6") [PC], (6 x 8") [2PC], (6 x 9")

(8 x 10"), (8 x 12") (A4)

Paper

(Paper

holder)

Width : 127 mm Width : 152 mm Width : 203 mm Width : 210 mm

Ribbon

(Ribbon

Cassette)

Width : 134 mm Width : 159 mm Width : 217 mm

CX-02W Series

Type

The feature

How to distinguish

Ribbon

Digital

(SD)

Standard quality paper�

Suitable for any

application�

Pure Premium Digital

(PP)

High quality paper�

Suitable for high quality

print such as portrait and

wedding�

* There are 2 kinds of media in CX-02W Series� Please prepare necessary media�

Gray Cap

Black Cap

L size spacer

- 15 -

Use the opening lever to open the lock, and

then pull out the mechanism unit�

Lift the paper lever and raise the front cover�

Hold the center of the scrap box and lift it

up straight�

Printer Installation

Caution

• Do not apply too much strength when pulling the mechanism unit out� If detached, the

mechanism unit may fall and cause an injury or damage to surrounding objects�

• Never remove the scrap box diagonally� The scrap box may be damaged and the product

may not operate normally�

• When the scrap box has been removed, do not touch the cutter on the upper part or you

may be cut�

• In order to facilitate color adjustment, media type recognition, and print quantity

management, an IC chip is included in the ink ribbon� Note that a ribbon with an IC chip that

has not been evaluated and approved may not function properly� (If correct data cannot be

read from the IC chip, an alarm will sound� In such a case, ink concentration levels will be

lowered in order to protect the product�)

Setting the media (paper, ribbon)

Opening lever

Front cover

Scrap box

Paper Lever

- 16 -

Remove the paper holder from the printer�

Remove the old paper roll from the paper

holder, and then set the new paper roll

ensuring there are no gaps�

If the paper protrudes, remove the roll from

the paper holder and set the edge face of

paper at.

Printer Installation

Caution

• The paper holders with a new paper roll set on it weigh approximately 2�0 kg� Do not let

them fall as they may cause physical injury or damage to the paper holders�

Set the roll so that

there are no gaps�

Set the paper so that

it does not protrude

from the roll�

• When removing the paper holders to change the paper roll etc�, make sure to

place them on the clean surface� Never place them directly on the table or work

spaces� If dust or dirt adheres to the media when setting the paper holder inside

the printer unit , it may adversely aect the print quality.

• When setting the media, make sure to use the plastic bag or sheet covering the

media. Never put it directly on the table, oor or work spaces.

- 17 -

Printer Installation

You can change the paper width of the paper holder (CX-02W Series only)�

Move the ange by rotating the paper holder while pulling the nob as shown in the gures to

switch between A4 and 8 inch widths� Reverse the procedure to change from 8 inch width to

A4 width� Use both paper holders set to the same width�

8inch

A4 width 8 inch width

Nob

Flange

Caution

• Do not put your ngers into gap on paper holder when you change the paper width of paper

holder from A4 to 8 inch� Otherwise, you may get injured�

Set the paper holder into the printer�

Set the seal on the paper (→PULL) in the same

direction as show on the right�

While pressing the paper holder, rotate

the paper in the direction of the arrow and

advance the leading edge until the buzzer

beeps�

The ashing LED (orange) turns o.

- 18 -

Set the scrap box and close the front cover�

Caution

• The CX-02W Series does not allow you to perform the print operation while the scrap box is

removed� If you close the front cover while the scrap box is removed, the no scrap box error

occurs and the error LED (red) ashes.

• Be sure to attach the scrap box� Otherwise, dust or dirt may enter inside the printer and

cause the print quality to deteriorate�

• When setting the media, make sure to use the plastic bag or sheet covering the

media. Never put it directly on the table, oor or work spaces.

Printer Installation

Remove the ribbon cassette from the printer unit�

- 19 -

Remove the old ribbon from the ribbon

cassette and set the new ribbon�

Install the ribbon cassette to the printer unit�

Close the mechanism unit�

When the mechanism unit is closed, the printer starts

paper initialization� (Five blank sheets are output�)

Paper initialization cuts o the outer layer of the paper

that may be dirty� Note that paper initialization is not

carried out if the printer ON/Standby switch is set to

ON after the paper is set�

Take-up side

Supply side

Rotate in the direction of the arrow

to take up the slack�

Install the cassette here�

Set the cassette so

that the supply side is

at the front�

Caution

• Make sure that the scrap box is installed when printing. If not installed, your ngers may get

caught in the moving parts and be injured�

• If different width media (for example L-size and PC-size) are used on the same printer,

problems with the print quality such as lines on the print could arise� Therefore, do not mix

the use of dierent width media on one printer.

Printer Installation

- 20 -

You may install the paper tray when using L or PC size paper rolls�

Up to 50 sheets can be stored, however it is recommended to remove the sheets regularly�

Attach the paper tray to the scrap box�

Lower the paper tray to set it�

Paper tray installation (CX-02 Series)

Insert the tray horizontally�

Caution

• Storing too many sheets may cause a malfunction�

• Do not apply too much strength on the paper tray� Otherwise, it may be damaged�

Printer Installation

Pagina se încarcă ...

Citizen CX-02 Manual de utilizare

Marca: Citizen

Model: CX-02

Categorie: Imprimante de etichete

Tip: Manual de utilizare

Acest manual este potrivit și pentru

CX-02W

Descărcați PDF

raport

în alte limbi

English: Citizen CX-02 User manual

Lucrări conexe

Citizen CZ-01 Manual de utilizare

Citizen CX-02 Manual de utilizare

Acest manual este potrivit și pentru

Citizen CX-02 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente