Philips AC5659/10R1 Manual de utilizare

Categorie
Purificatoare de aer
Tip
Manual de utilizare
1 2
Control buttons
Display panel
A B
C
D
E
G
H
F
© 2019 Koninklijke Philips N.V.
All rights reserved.
4241 210 97864
AC5659
EN User manual 1
CS Příručka pro uživatele 19
HU Felhasználói kézikönyv 37
PL Instrukcja obsługi 57
RO Manual de utilizare 79
SK Príručka užívateľa 99
UK Посібник користувача 118
29
3
11
7
15
21
3’
19
5
13
9
17
6
14
10
3’
18
24
4
12
8
16
23
22
3’
20
3’
25
27
3’
31
35
33
3’
3’
32
28
26
30
34
1EN
English
Contents
1 Important 2
Safety 2
2 Your air purier 5
Product overview (g. a) 5
Controls overview (g. b) 5
3 Getting started 6
Installing the lters 6
Wi-Fi connection 6
4 Using the air purier 7
Understanding the air quality light 7
Turning on and o 8
Changing the Auto mode setting 8
Changing the fan speed 9
Using the light on/o function 9
Switching the display indicator 10
Setting the child lock 10
5 Cleaning 11
Cleaning schedule 11
Cleaning the body of the air
purier 11
Cleaning the air outlet cover 11
Cleaning the air quality sensor 11
Cleaning the pre-lter 12
6 Replacing the lters 13
Filter replacement indicator 13
Replacing the lters 13
Filter reset 14
7 Storage 14
8 Troubleshooting 15
9 Guarantee and service 17
Order parts or accessories 17
10 Notices 17
Electromagnetic elds (EMF) 17
Recycling 18
Notice 18
Simplied EU declaration of
conformity 18
Environmental friendly paper used. Thanks for your contribution to save trees.
2 EN
1 Important
Safety
Read this user manual carefully before
you use the appliance, and save it for
future reference.
Danger
Do not let water or any
other liquid or ammable
detergent enter the
appliance to avoid electric
shock and/or a re hazard.
Do not clean the
appliance with water,
any other liquid, or a
(ammable) detergent to
avoid electric shock and/
or a re hazard.
Do not spray any
ammable materials
such as insecticides or
fragrance around the
appliance.
Warning
Check if the voltage
indicated on the
appliance corresponds to
the local power voltage
before you connect the
appliance.
If the power cord is
damaged, you must have
it replaced by Philips, a
service center authorized
by Philips, or similarly
qualied persons in order
to avoid a hazard.
Do not use the appliance
if the plug, the power cord,
or the appliance itself is
damaged.
This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Child
shall not play with the
appliance. Cleaning and
maintenance shall not be
made by children without
supervision.
Do not block the air inlet
and outlet, e.g. by placing
items on the air outlet or
in front of the air inlet.
Make sure that foreign
objects do not fall into the
appliance through the air
outlet.
3EN
English
Standard WiFi interface
based on 802.11b/g/n at
2.4 GHz with a maximum
output power of 31.62 mW
EIRP.
Caution
This appliance is not
a substitute for proper
ventilation, regular
vacuum cleaning, or use
of an extractor hood or
fan while cooking.
If the power socket used
to power the appliance
has poor connections,
the plug of the appliance
becomes hot. Make
sure that you plug the
appliance into a properly
connected power socket.
Always place and use the
appliance on a dry, stable,
level, and horizontal
surface.
Leave at least 20cm free
space behind and on both
sides of the appliance
and leave at least 30cm
free space above the
appliance.
Do not place anything on
top of the appliance.
Do not sit or stand on
the appliance. Sitting or
standing on the appliance
may lead to potential
injury.
Do not place the
appliance directly below
an air conditioner to
prevent condensation
from dripping onto the
appliance.
Make sure all lters
are properly installed
before you switch on the
appliance.
Only use the original
Philips lters specially
intended for this
appliance. Do not use any
other lters.
Combustion of the lter
may cause inreversible
human hazard and/or
jeopardize other lives. Do
not use the lter as fuel or
for similar purpose.
Avoid knocking against
the appliance (the air inlet
and outlet in particular)
with hard objects.
Always lift or move the
appliance by the handle
on back side of the
appliance.
4 EN
To prevent interference,
place the appliance at
least 2 meters away from
electrical appliances that
use airborne radio waves
such as TVs, radios, and
radio-controlled clocks.
The appliance is only
intended for household
use under normal
operating conditions.
Do not use the appliance
in wet surroundings or in
surroundings with high
ambient temperatures,
such as the bathroom,
toilet, or kitchen.
The appliance does
not remove carbon
monoxide (CO) or radon
(Rn). It cannot be used
as a safety device in
case of accidents with
combustion processes
and hazardous chemicals.
If you need to move the
appliance, disconnect the
appliance from the power
supply rst.
Do not move the
appliance by pulling its
power cord.
Always cleanse your
hands after changing the
lters.
Do not insert your ngers
or objects into the air
outlet or the air inlet to
prevent physical injury
or malfunctioning of the
appliance.
Do not use this appliance
when you have used
indoor smoke-type insect
repellents or in places
with oily residues, burning
incense, or chemical
fumes.
Do not use the appliance
near gas appliances,
heating devices or
replaces.
Always unplug the
appliance after use
and before cleaning,
or carrying out other
maintenance or replacing
the lters.
Do not use the appliance
in a room with major
temperature changes,
as this may cause
condensation inside the
appliance.
5EN
English
Controls overview
(g. b)
Control buttons
I Power on/o button
J Light on/o button
K Auto mode button
L Fan speed button
M Child lock button
N Reset button
Display panel:
Sleep mode
Speed 1
Speed 2
Speed 3
Turbo
Filter replacement alert
Pre-lter cleaning alert
Wi-Fi indicator
Gas display
PM2.5 display
Indoor Allergen Index
Pollution mode
Allergen mode
Bacteria & Virus mode
Child lock indicator
2 Your air purifier
Congratulations on your purchase, and
welcome to Philips!
To fully benet from the support that
Philips oers, register your product at
www.philips.com/welcome.
Product overview (g. a)
A Control buttons
B Air outlet cover
C Air quality sensor
D Display panel
E
NanoProtect lter Series 3
(FY5185)
F
NanoProtect lter Active Carbon
(FY5182)
G Pre-lter
H Side covers
6 EN
3 Getting started
Installing the lters
Note
Make sure the air purier is unplugged
from the electrical outlet before
installing the lters.
Make sure the side of the lter with the
tag is pointing towards you.
1 Pull the top part of the side panel to
remove it from the air purier
(g. c).
2 Press the two clips down (1) and pull
the pre-lter towards you (2)
(g. d).
3 Remove all lters (g. e).
4 Remove all packaging materials
from the lters (g. f).
5 Place the thick lter (FY5185) into
the air purier and then the thin
Active Carbon lter (FY5182). The
model numbers are shown on each
lter (g. g).
6 Attach the pre-lter back into the
air purier (g. h).
Note
Make sure the side with the two clips
is pointing towards you, and that all
hooks of the pre-lter are properly
attached to the purier.
7 Reattach the front panel by pressing
the top part of the panel onto the
top of the air purier (1). Then, gently
push the panel against the body of
the air purier (2) (g. i).
8 Repeat the above steps and
assemble the lter for the other side
of the air purier.
9 Wash your hands thoroughly after
installing lters.
Wi-Fi connection
Setting up the Wi-Fi connection
for the rst time
1 Download and install the Philips
"Clean Home+" app from the App
Store or Google Play.
2 Put the plug of the air purier in the
power socket and touch
to turn
on the air purier.
» The Wi-Fi indicator
blinks
orange for the rst time.
3 Make sure that your smartphone or
tablet is successfully connected to
your Wi-Fi network.
4 Launch the "Clean Home+" app and
click on "Connect a New Device"
or press the "+" button on the top
of the screen. Follow the onscreen
instructions to connect the air
purier to your network.
5 After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the "Clean Home+"
App for extensive and up-to-date
troubleshooting tips.
7EN
English
4 Using the air
purifier
Understanding the air
quality light
PM2.5
level
Air quality
light color
Air quality
level
12 Blue Good
13-35 Blue-Purple Fair
36-55 Purple-Red Poor
>55 Red Very poor
The air quality light automatically goes
on when the air purier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.
PM2.5
AeraSense sensing technology
accurately detects and quickly responds
to even the slightest particle change in
the air. It provides you with reassurance
with real-time PM2.5 feedback.
IAI
The professional-grade AeraSense
sensor detects the level of indoor air
allergen and with numerical feedback
from 1 to 12 the potential risk level of
indoor air allergens can be displayed. 1
indicates best air quality.
GAS
With an advanced as sensor, a display
ranging from L1 to L4 shows the density
level of potential harmful gases (incl.
VOC, odor, etc.) detected. L1 indicates
best air quality.
Note
This instruction is only valid when
the air purier is being set up for the
rst time. If the network has changed
or the setup needs to be performed
again, consult section "Reset the Wi-Fi
connection" on page 7.
If you want to connect more than
one air purier to your smartphone
or tablet, you have to do this one by
one. Complete the set up of one air
purier before you turn on the other air
purier.
Make sure that the distance between
your smartphone or tablet and the air
purier is less than 10 m without any
obstructions.
This App supports the latest versions
of Android and iOS. Please check
www.philips.com/cleanhome for the
latest update of supported operating
systems and devices.
Reset the Wi-Fi connection
Note
This applies when the default network
to which your purier is connected has
changed.
Reset the Wi-Fi connection when your
default network has changed.
1 Put the plug of the air purier in the
power socket and touch
to turn
on the air purier.
2 Touch and simultaneously for
3 seconds until you hear a beep.
» The air purier goes to pairing
mode.
» The Wi-Fi indicator
blinks
orange.
3 Follow the steps 4-5 in "Setting up
the Wi-Fi connection for the rst
time" section.
8 EN
Turning on and o
Note
Always place the air purier on a
stable, horizontal, and level surface
with the front of the unit facing away
from walls or furniture.
For optimum purication performance,
close doors and windows.
Keep curtains away from the air inlet or
air outlet.
1 Put the plug of the air purier in the
power socket.
2 Touch to switch on the air purier
(g. j).
» The air purier beeps.
» The air purier operates under
the Pollution mode by default.
» When the air purier is warming
up, "
" displays on the
screen. After measuring the
particulate matter only in the
air, the air purier shows the
PM2.5 level and operates in the
auto mode with
displayed on
the screen (g. k).
» After 30 seconds, the air
purier shows the IAI level
on the screen. The air quality
sensor automatically selects
the appropriate air quality light
color.
3 Touch and hold for 3 seconds to
switch o the air purier.
Note
If the air purier stays connected to
the electrical outlet after turning OFF,
the air purier will operate under the
previous settings when turned ON
again.
Changing the Auto mode
setting
You can choose the Pollution mode
(
), Allergen mode ( ), or the
Bacteria & Virus mode ( ).
Pollution mode
The specially designed pollution
mode can eectively remove airborne
pollutants such as PM2.5.
Touch the Auto mode button
to
select the Pollution mode (g. l).
» Auto (
) and display on the
screen.
Allergen mode
The extra-sensitive allergen mode
is designed to react to even a small
change in allergen levels in the
surrounding air.
Touch the Auto mode button
to
select the Allergen mode (g. m).
» Auto (
) and display on the
screen.
Bacteria & Virus mode
The bacteria & virus mode boosts the
airow to quickly reduce bacteria &
viruses.
Touch the Auto mode button
to
select the Bacteria & Virus mode
(g. n).
» Auto (
) and display on the
screen.
9EN
English
Turbo (t)
In turbo mode, the air purier operates
on the highest speed.
Touch the fan speed button
to
select the turbo mode (
) (g. q).
» The "
" displays on the screen.
» The turbo speed indicator
goes on.
Using the light on/o
function
With the light dimming button, you can
switch on or o the air quality light,
the display screen and the function
indicator if desired.
1 Touch the light dimming button
once, the air quality light will be
dimmed.
2 Touch the light dimming button
again, the air quality light will go o.
3 Touch the light dimming button
for the third time, all lights will be on
again.
Changing the fan speed
In addition to the Auto modes, there are
several fan speeds available.
When using the manual fan speed
settings, the purier will still monitor the
air quality, but it will not automatically
adjust the fan speed if it detects
changes in the air quality.
Sleep mode ( )
In sleep mode, the air purier operates
quietly at a very low speed.
Touch the fan speed button
to
select the sleep mode (SL) (g. o).
» The "
" displays on the
screen.
» The sleep mode indicator
goes on.
Manual
Touch the fan speed button
repeatedly to select the fan speed
you need (g. p):
(Speed 1)
(Speed 2)
(Speed 3)
Tips
If the air quality light lights up blue,
it indicates that the air quality is
good, and you can select a lower fan
speed. On the other hand, if the air
quality light lights up red-purple or
red, it indicates that the air quality
is unhealthy, and you can select a
higher fan speed to purify the air more
quickly.
10 EN
Setting the child lock
1
Touch and hold the child lock
button
for 3 seconds to activate
child lock (g. u).
» The child lock icon
displays
on the screen.
» When the child lock is on,
all the other buttons are not
responsive.
2 Touch and hold the child lock
button
for 3 seconds again to
deactivate child lock.
» The child lock icon
disappears.
Note
You can still control the appliance
through the App even child lock is
activated.
Switching the display
indicator
The air purier has three display
indicators, PM2.5 index, IAI index and
Gas level.
Note
The air purier operates in PM2.5 index
by default.
1 Touch the light dimming button
for 3 seconds to switch to IAI display
mode (g. r) .
» The IAI indicator and the actual
IAI index display on the screen.
2 Touch the light dimming button
for 3 seconds again to switch to Gas
level display (g. s).
» The Gas indicator and the
actual Gas level display on the
screen.
3 Touch the light dimming button
for 3 seconds again to switch back
to PM2.5 display mode (g. t).
» The PM2.5 level displays on the
screen.
Note
It is possible that the air quality light
may still be red even if the PM2.5
index is very low. It's normal. This is
because that at least one of the index
( the IAI index or Gas level) is high that
turns the air quality light to red. The
appliance real-time displays the air
quality index with the highest risk.
11EN
English
5 Cleaning
Note
Always turn the air purier o and
unplug from the electrical outlet
before cleaning.
Never immerse the air purier in water
or any other liquid.
Never use abrasive, aggressive, or
ammable cleaning agents such as
bleach or alcohol to clean any part of
the air purier.
Only the pre-lter is washable. The air
lters are not washable.
Do not attempt to clean the lters or
air quality sensor with a vacuum.
Cleaning schedule
Frequency Cleaning method
When
necessary
Wipe the surface of
the appliance with
a soft dry cloth
Clean the air outlet
cover
Every two
months
Clean the air quality
sensor with a dry
cotton swab
When the pre-
lter cleaning
indicator
lights up and
F0 displays on
the screen
Clean the pre-lter
Cleaning the body of the
air purier
Regularly clean the inside and outside
of the air purier to prevent dust from
collecting.
1 Use a soft, dry cloth to clean both
the interior and exterior of the air
purier.
2 The air outlet can also be cleaned
with a dry, soft cloth.
Cleaning the air outlet
cover
1
To unlock the air outlet cover, grab
the handle on the cover and pull
the cover up (g. v).
2 Clean the cover with a brush (g. w).
3 To reattach the cover, mount it onto
the top of the appliance rst, and
then push the side with the handle
towards the appliance (g. x).
Cleaning the air quality
sensor
Clean the air quality sensor every
2 months for optimal functioning of the
purier.
Note
If the air purier is used in a dusty
environment, it may need to be
cleaned more often.
If the humidity level in the room is
very high, condensation may develop
on the air quality sensor and the air
quality light may indicate a poorer air
quality even though the air quality is
actually good. If this occurs, clean the
air quality sensor or use the air purier
on a manual speed setting.
12 EN
1 Switch o the air purier and unplug
from the power socket.
2 Clean the air quality sensor inlet and
outlet with a soft brush (g. y).
3 Open the air quality sensor cover
(g. z).
4 Clean the air quality sensor, the
dust inlet and the dust outlet with a
damp cotton swab (g. {).
5 Dry all parts thoroughly with a dry
cotton swab.
6 Reattach the air quality sensor cover
(g. |).
Cleaning the pre-lter
Clean the pre-lter when F0 is displayed
on the screen and the pre-lter cleaning
indicator
is on (g. }).
1 Switch o the air purier and unplug
from the power socket.
2 Pull the top part of the side panel to
remove it from the air purier
(g. c).
3 Press the two clips down (1) and pull
the pre-lter towards you (2)
(g. d).
4 If the pre-lter is very dirty, use a
soft brush to brush away the dust.
Then wash the pre-lter under
running tap water (g. ~).
5 Allow the pre-lter to air dry
thoroughly before placing back in
the air purier.
6 Put the pre-lter back into the air
purier (g. h).
Note
To optimize the lifetime of the pre-lter,
make sure it air dries completely after
cleaning.
Wash your hands after handling the lter.
Make sure the side with the two clips is
pointing towards you, and that all hooks
of the pre-lter are properly attached to
the air purier.
7 To reattach the front panel, press the
top part of the panel onto the top of
the air purier (1). Then, gently push
the panel against the body of the air
purier (2) (g. i).
8 Put the plug of the air purier in the
power socket.
9 Touch the button to switch on the
appliance.
10 Touch and hold the reset button
for 3 seconds to reset the pre-lter
cleaning time.
11 Wash your hands thoroughly after
installing lters.
13EN
English
Filter alert light
status
Action
A3 displays on the
screen and the
lter replacement
alert
goes on
Replace the
NanoProtect
lter Series 3
(FY5185)
C7 displays on the
screen and the
lter replacement
alert
goes on
Replace the
NanoProtect lter
Active Carbon
(FY5182)
A3 and C7 display
on the screen
alternately and the
lter replacement
alert
goes on
Replace both
lters
1 Turn o the air purier and unplug
from the power socket.
2 Take out the used air lter according
to the lter alert light status
displayed on the screen. Discard
used lters (g. ).
Note
Do not touch the pleated lter surface,
or smell the lters as they have
collected pollutants from the air.
3 Remove all packaging material from
the new lters (g. f).
4 Place the new lters into the air
purier (g. g).
5 Put the plug of the air purier in the
power socket.
6 Touch and hold the reset button
for 3 seconds to reset the lter
lifetime counter.
6 Replacing the
filters
Filter replacement
indicator
This air purier is equipped with a
lter replacement indicator to make
sure that the air purication lter is in
optimal condition when the air purier
is operating. When the lters need to be
replaced, the lter code displays on the
screen (see Filter alert chart).
If the lters are not replaced in time,
the air purier will stop operating and
automatically lock to protect the air
quality in the room. Replace the lters
as soon as possible according to the
lter code.
Replacing the lters
Note
The air lters are not washable or
reusable.
Always turn o the air purier and
unplug from the electrical outlet
before replacing the lters.
Do not clean the lters with a vacuum.
If the pre-lter is damaged, worn or
broken, do not use. Visit
www.philips.com/support or contact
the Consumer Care Center in your
country.
14 EN
7 Storage
1 Turn o the air purier and unplug
from the power socket.
2 Clean the air purier, air quality
sensor and pre-lter (see chapter
‘Cleaning’).
3 Let all parts air dry thoroughly
before storing.
4 Wrap the lters and pre-lters
separately in air tight plastic bags.
5 Store the air purier, lters and pre-
lters in a cool, dry location.
6 Always thoroughly wash hands after
handling lters.
Note
Wash your hands after changing a lter.
This air purier has no other user-
serviceable parts. For assistance,
contact the Consumer Care Center in
your country.
Filter reset
You can replace lters even if there is
no lter replacement code displayed on
the screen. After replacing a lter, you
need to reset the lter lifetime counter
manually.
1 Touch and simultaneously for
3 seconds to enter the lter reset
mode (g. ).
» Code (A3) of the NanoProtect
lter Series 3 displays on the
screen.
2 Touch and hold for 3 seconds to
force reset the lter lifetime counter
of the NanoProtect lter Series 3
(g. ).
3 Code (C7) of the NanoProtect lter
Active Carbon displays on the
screen after the lifetime counter of
the NanoProtect lter Series 3 has
been reset (g. ).
4 Touch and hold for 3 seconds to
force reset the lter lifetime counter
of the NanoProtect lter Active
Carbon and exit the lter reset
mode (g. ƒ).
15EN
English
8 Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, contact
the Consumer Care Center in your country.
Problem Possible solution
The air purier
does not work
even though it is
switched on.
Check if the top cover is properly installed.
The lter replacement indicator has been on continuously
but you have not replaced the corresponding lter, and the
air purier is now locked. In this case, replace the lter and
reset the lter lifetime counter.
The airow that
comes out of
the air outlet is
signicantly weaker
than before.
The pre-lter is dirty. Clean the pre-lter (see chapter
"Cleaning").
The air quality
does not improve,
even though the air
purier has been
operating for a long
time.
Check if the packing material is removed from the lters.
One of the lters has not been placed in the air purier
or a lter is not placed properly. Make sure that all lters
are properly installed in the following order, starting with
the innermost lter: 1) NanoProtect lter Series 3 (FY5185);
2) NanoProtect lter Active Carbon (FY5182); 3) pre-lter.
The air quality sensor is wet. Make sure that the air quality
sensor is clean and dry (see chapter "Cleaning").
The color of the air
quality light always
stays the same.
The air quality sensor is dirty. Clean the air quality sensor
(see chapter "Cleaning").
The air purier
produces a
unpleasant smell.
The rst few times you use the appliance, it may produce
a plastic smell. This is normal. However, if the appliance
produces a burnt smell, contact your Philips dealer
or an authorized Philips service center. The lter may
produce smell after being used for a while because of
the absorption of indoor air. Remove the lter and place
it where it has direct sunlight and ventilation for several
hours. Re-install and try using it again. If the odor remains,
please replace the lter.
The air purier is
loud.
If the air purier is too loud, change the fan speed to a
lower fan speed level. When using the air purier in a
bedroom at night, choose the sleep mode.
16 EN
Problem Possible solution
The air purier still
indicates that I
need to replace a
lter, but I already
did.
Perhaps you did not reset the lter lifetime counter. Plug
in the air purier, touch
to switch on the air purier, and
touch and hold the reset button
for 3 seconds (see
Filter reset section).
Error code "E1"
displays on the
screeen.
The motor has malfunctions. Contact the Consumer Care
Center in your country.
Error codes "E2",
"E3", "E4" or "E5"
displays on the
screen.
The sensor has malfunctions. Contact the Consumer Care
Center in your country.
Which App I should
download?
Download and install the Philips "Clean Home+" app from
the App Store or Google Play.
The Wi-Fi setup is
not successful.
If the router your purier is connected to is dual-band
and currently it is not connecting to a 2.4GHz network,
please switch to another band of the same router (2.4GHz)
and try to pair your purier again. 5GHz networks are not
supported.
Web authentication networks are not supported.
Check if the purier is within range of the Wi-Fi router. You
can try to locate the air purier closer to the Wi-Fi router.
Check if the network name is correct. The network name is
case-sensitive.
Check if the Wi-Fi password is correct. The password is
case-sensitive.
Retry the setup with the instructions in section ‘Set up the
Wi-Fi connection when the network has changed’.
The Wi-Fi connectivity can be interrupted by electromagnetic
or other interferences. Keep the appliance away from other
electronic devices that may cause interferences.
Check if the mobile device is in airplane mode. Make sure
to have the airplane mode deactivated when connecting
to the Wi-Fi network.
Consult the help section in the App for extensive and up-
to-date troubleshooting tips.
17EN
English
9 Guarantee and
service
If you need information or if you have
a problem, please visit the Philips
website at www.philips.com or contact
the Philips Consumer Care Center in
your country (you nd its phone number
in the worldwide guarantee leaet). If
there is no Consumer Care Centre in
your country, go to your local Philips
dealer.
Order parts or
accessories
If you have to replace a part or want to
purchase an additional part, go to your
Philips dealer or visit
www.philips.com/support.
If you have problems obtaining the
parts, please contact the Philips
Consumer Care Center in your country
(you can nd its phone number in the
worldwide guarantee leaet).
10 Notices
Electromagnetic elds
(EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
elds.
Compliance with EMF
Koninklijke Philips N.V. manufactures
and sells many products targeted at
consumers, which, like any electronic
apparatus, in general have the ability
to emit and receive electromagnetic
signals.
One of Philips' leading Business
Principles is to take all necessary health
and safety measures for our products,
to comply with all applicable legal
requirements and to stay well within the
EMF standards applicable at the time of
producing the products.
Philips is committed to develop,
produce and market products that
cause no adverse health eects. Philips
conrms that if its products are handled
properly for their intended use, they
are safe to use according to scientic
evidence available today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments in
standardization for early integration in
its products.
18 EN
Recycling
This symbol means that this product
shall not be disposed of with normal
household waste (2012/19/EU).
Follow your country’s rules for the
separate collection of electrical and
electronic products. Correct disposal
helps prevent negative consequences
for the environment and human health.
Notice
App Store is a service mark of Apple Inc.
Google Play is a trademark of Google
Inc.
This Philips appliance and Clean
Home+ app applied multiple open
source softwares, Copies of open
source software license text used in this
product can be derived from website-
www.philips.com/cleanhome.
Simplied EU declaration
of conformity
Hereby, Philips Consumer Lifestyle B.V.
declares that the radio equipment type
AC5659 is in compliance with Directive
2014/53/EU. The full text of the EU
declaration of conformity is available at
the following internet address:
www.philips.com.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142

Philips AC5659/10R1 Manual de utilizare

Categorie
Purificatoare de aer
Tip
Manual de utilizare