Yamaha DV-SL100 Manualul proprietarului

DVD / VIDEO CD / CD PLAYER

LECTEUR DE DVD

DV-SL100

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

G

3139 246 13251

DV-SL100

DV-SL100(G)

IP

Printed in China

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

DK

Advarsel:

Laserrudstråling ved åbning når sikkerhesafbrydere er ude

af funktion. Undgå u tsættelse for stråling.

Bemærk:

Netafbryderen STANDBY/ON er sekundært indkoblet og

afbryder ikke strømmen fra nette. Den indbyggede netdel

er derfor tilsluttet til lysnettet så længe netstikket sidder i

stikkontakten.

N

Observer:

Nettbryteren STANDBY/ON er sekundert innkoplet. Den

innebygdenetdelen er derfor ikke frakoplet nettet så lenge

apparatet er tilsluttet nettkontakten.

S

Klass 1 laserapparat

Varning!

Om apparaten används på annat sätt än i denna

bruksanvisning specificerats, kann användaren utsättas för

laserstrålning, som översjruder gränsen för läserklass 1.

Observera!

Strömbrytaren STANDBY/ON är sekundärt kopplad och

inte bryter strömmen fråan nätet Den inbyggda nätdelen

är därför ansluten till elnätet så länge stickproppen sitter i

v ägguttaget.

SF

Luokan 1 laserlaite + Klass 1 laserapparat

Varoitus!

Laitteen käyttäminen muulla kuin tässä käyttöohjeessa

mainitulla tavalla saattaa altistaa käyttäjän

turvallisuusluokan 1 ylittävälle lasersäleilille.

Huom.

Toiminnanvalitsin STANDBY/ON on kytketty

toisiopuolelle, eikä se kytke laitetta irti sähköverkosta.

Sisäänrakennettu verkko-osa on kytkettynä

sähköverkkoon aina silloin, kun pistoke on pistorasiassa.

Important Note for Users in the UK

markings identifying the terminals in your plug, proceed as

follows:

• Connect the blue wire to the terminal marked N or

coloured black.

• Connect the brown wire to the terminal marked L or

coloured red.

•Do not connect either wire to the earth terminal in the

plug, marked E (or e) or coloured green (or green and

yellow).

Before replacing the plug cover, make certain that the cord

grip is clamped over the sheath of the lead - not simply

over the two wires.

Copyright in the U.K.

Recording and playback of material may require

consent. See Copyright Act 1956 and The

Performer’s Protection Acts 1958 to 1972.

Mains plug

This apparatus is fitted with an approved 13 Amp plug.To

change a fuse in this type of plug proceed as follows:

1 Remove fuse cover and fuse.

2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A.

or BSI approved type.

3 Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it

should be cut off and an appropriate plug fitted in its place.

If the mains plug contains a fuse, this should have a value of

5 Amp. If a plug without a fuse is used, the fuse at the

distribution board should not be greater than 5 Amp.

Note:The severed plug must be disposed of to avoid a possible

shock hazard should it be inserted into a 13 Amp socket

elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following

code: blue = neutral (N), brown = live (L).

As these colours may not correspond with the colour

VARO!

AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET

ALTTIINA NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ

KATSO SÄTEESEEN.

VARNING!

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD

OCH SPÄRREN ÄR URKOPPLAD.

BETRAKTA EJ STRÅLEN.

Important Note

i

General information

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may result

in hazardous radiation exposure.

ATTENTION

L’emploi de commandes, de réglages ou un choix de

procédures différents des spécifications de cette

brochure peut entraîner une exposition à d’éventuelles

radiations pouvant être dangereses.

ACHTUNG

Die Verwendung von Bedienungselementen oder

Einstellungen oder die Durchführung von

Bedienungsvorgängen, die nicht in dieser Anleitung

aufgeführt sind, kann zu einem Kontakt mit gefährlichen

Laserstrahlen führen.

OBSERVERA

Användning av kontroller och justeringar eller

genomförande av procedurer andra än de som

specificeras i denna bok kan resultera i att du utsätter

dig för farlig strålning.

ATTENZIONE

Uso di controlli o regolazioni o procedure non

specificamente descritte può causare l’esposizione a

radiazioni di livello pericoloso.

PRECAUCIÓN

El uso de los controles o los procedimientos de ajuste o

utilización diferentes de los especificados en este

manual pueden causar una exposición peligrosa a la

radiación.

VOORZICHTIG

Gebruik van bedieningsorganen of instellingen, of

uitvoeren van handelingen anders dan staan beschreven

in deze handleiding kunnen leiden tot blootstelling aan

gevaarlijke stralen.

The unit is not disconnected from the AC power source as

long as it is connected to the wall outlet,even if this unit itself

is turned off.This state is called the standby mode.In this

state,this unit is designed to consume a very small quantity of

power.

L ’appareil n ’est pas isolé de la source d ’alimentation aussi

longtemps qu ’il reste branché sur une prise murale,même

lorsqu ’il est éteint.Il est alors dit en mode «Veille ».Dans ce

mode, l ’appareil consomme très peu de courant.

Das Gerät ist nicht vom Netz getrennt, solange der

Netzstecker noch mit der Wandsteckdose verbunden ist,

selbst wenn das Gerät ausgeschaltet wurde. Dieser

Betriebszustand wird als Bereitschaftsmodus bezeichnet. In

diesem Zustand nimmt das Gerät eine sehr geringe Menge

Strom auf.

Enheten är inte urkopplad från nätet så länge som den är

ansluten till vägguttaget även om enheten i sig självt är

avstängd. Detta kallas för beredskapsläge och i detta tillstånd

konsumerar apparaten minimalt med ström.

L’unità non è scollegata dall’impianto elettrico di casa sintanto

che rimane collegata ad una presa di corrente anche se è

spenta. Questo modo viene chiamato “modo di attesa”. In

esso, l’unità consuma una quantità molto bassa di energia per

mantenere in memoria le impostazioni da voi fatte.

Aunque el propio aparato se encuentre apagado, éste no se

desconectará de la fuente de CA siempre que se mantenga

enchufado a la toma de corriente. Este estado recibe el

nombre de “modo de espera”. En este estado, este aparato ha

sido diseñado para consumir una cantidad muy pequeña de

energía.

De stroomtoevoer naar het toestel is niet afgesloten zolang

de stekker nog in het stopcontact zit, zelfs niet als het toestel

zelf uitgeschakeld is. Deze toestand wordt “standby” (waak- of

paraatstand) genoemd. Het toestel is ontworpen om in deze

toestand

CAUTION VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN AVOID EXPOSURE TO BEAM

ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING VED

ÅBNING UNDGÅ UDSÆTTELSE FOR STRÅLING

ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING NÅR

DEKSEL ÅPNES UNNGÅ EKSPONERING FOR STRÅLEN

VARNING SYNLIG OCH OSYNLIG LASERSTRÅLNING

NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN

VARO! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA

NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ KATSO

SÄTEESEEN

VORSICHT SICHTBARE UND UNSICHTBARE

LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET

NICHT DEM STRAHL AUSSETSEN

DANGER VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM

ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE

EN CAS D’OUVERTURE EXPOSITION DANGEREUSE AU

FAISCEAU

ii

le laser

CAUTION

- Visible and invisib

radiation when open. Avoid exposure to beam.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2

Install this sound system in a well ventilated, cool, dry,

clean place — away from direct sunlight, heat sources,

vibration, dust, moisture, or cold. In a cabinet, allow

about 2.5cm (1 inch) of free space all around this unit

for adequate ventilation.

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes

from cold to hot, nor locate this unit in an environment

with high humidity (i.e., a room with a humidifier) to

prevent condensation inside this unit, which may cause

an electrical shock, fire, damage to this unit, and/or

personal injury.

5 Avoid installing this unit in a location where foreign

objects may fall onto this unit or where this unit may be

exposed to liquid dripping or splashing. On the top of

this unit, do not place:

– Other components, as they may cause damage and/

or discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall,

spilling the liquid and causing an electrical shock to

the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause fire,

damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use excessive force on switches, knobs and/or

cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this

unit with a higher voltage than specified is dangerous

and may cause fire, damage to this unit, and/or personal

injury. YAMAHA will not be held responsible for any

damage resulting from use of this unit with a voltage

other than as specified.

13 To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any service

is needed. The cabinet should never be opened for any

reason.

15 When not planning to use this unit for long periods of

time (i.e., vacation), disconnect the AC power plug from

the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this

unit is faulty.

17 Before moving this unit, press STANDBY/ON to set the

unit in standby mode, then disconnect the AC power

plug from the wall outlet.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

NOTE:

Pictures shown maybe different between countries.

Never make or change connections with the power

switched on.

When playing DTS encoded CDs, excessive noise will be

heard from the analog stereo outputs. To avoid possible

damage to the audio system, the consumer should take

proper precautions when the analog stereo outputs of the

player are connected to an amplification system. To enjoy

DTS Digital Surround™ playback, an external 5.1-channel

DTS Digital Surround™ decoder system must be

connected to the digital output of the player.

LASER SAFETY

This unit employs a laser. Due to possible eye injury, only a

qualified service person should remove the cover or

attempt to service this device.

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN. AVOID EXPOSURE TO BEAM (WARNING

LOCATION: INSIDE ON LASER COVERSHIELD OR THE

BACKPLATE OF SET)

LASER

Type Semiconductor laser GaAlAs

Wave length 650 nm (DVD)

780 nm (VCD/CD)

Output Power 7 mW (DVD)

10 mW (VCD/CD)

Beam divergence 60 degree

DANGER

This unit emits visible laser radiation when open. Avoid

direct eye exposure to beam.

When this unit is plugged into a wall outlet, do not place

your eyes close to the opening of the disc tray and other

openings or look inside.

iii

1

English

Introduction

Environmental Information ....................................................2

Supplied accessories ................................................................2

Notes about discs ....................................................................2

Cleaning discs ........................................................................................... 2

Symbols Used in this Manual .................................................2

Functional Overview

Front and Rear Panels .............................................................3

Remote Control .......................................................................4

Preparation

General Notes on connections.............................................5

Digital Connections .................................................................5

Analog Connections ................................................................5

Video Connections ..................................................................6

S VIDEO terminal <A>...................................................................... 6

VIDEO terminal <B>........................................................................... 6

COMPONENT VIDEO terminal <C>..................................... 6

SCART Connection <D>................................................................. 6

Connecting an AV receiver with a SCART terminal .......6

Inserting batteries into the Remote Control.....................7

Using the Remote Control............................................................... 7

PAL/NTSC Conversion...........................................................7

Turning on the power.............................................................7

Smart Power On/Off...............................................................7

Operation

Basic Playback............................................................................8

General Operation...................................................................8

Video control during playback........................................................ 8

Audio control during playback........................................................ 8

Repeat and Shuffle................................................................................. 9

Repeat A-B ................................................................................................ 9

Disc Resume ............................................................................................. 9

OSD (On-Screen Display)................................................................ 9

Zoom ......................................................................................................... 10

Special DVD Features .......................................................... 10

Playing a Title......................................................................................... 10

Playing a Chapter................................................................................. 10

Camera Angle ....................................................................................... 10

Changing the Audio Language and/or format .................... 10

Subtitles..................................................................................................... 10

Special VCD & SVCD Features.......................................... 10

Playback Control (PBC) .................................................................. 10

Preview Function................................................................................. 11

JPEG & MP3 CD Playback

General Operation................................................................ 12

MP3 & JPEG Navigator .................................................................... 12

Play Mode................................................................................................ 12

Special JPEG Features........................................................... 13

Function Introduction........................................................................ 13

Preview Function ................................................................................. 13

Zoom picture ........................................................................................ 13

Playback with multi-angles.............................................................. 13

Wipe Effect............................................................................................. 13

Special MP3 Features............................................................ 13

Function Introduction........................................................................ 13

JPEG and MP3 simultaneous playback .............................. 13

Setup Menu

Basic Operation ..................................................................... 14

General Setup menu............................................................. 14

DISC LOCK............................................................................................ 14

PROGRAM (not for JPEG / MP3 CD) ................................... 14

OSD LANGUAGE............................................................................. 15

SCREEN SAVER .................................................................................. 15

Audio Setup menu................................................................. 15

SPEAKER SETUP ................................................................................. 15

DIGITAL AUDIO SETUP............................................................... 16

EQUALIZER (Sound Mode)......................................................... 16

3D (REVERB MODE)....................................................................... 16

Video Setup menu................................................................. 17

TV TYPE................................................................................................... 17

TV DISPLAY........................................................................................... 17

CLOSED CAPTION ......................................................................... 18

COMPONENT .................................................................................... 18

PROGRESSIVE...................................................................................... 18

PICTURE SETTING ........................................................................... 18

PASSWORD SETUP............................................................. 19

Preference Setup menu........................................................ 20

AUDIO language................................................................................. 20

SUBTITLE language ............................................................................ 20

DISC MENU language...................................................................... 20

PARENTAL Control.......................................................................... 21

DEFAULT Setup.................................................................................. 21

MP3/JPEG NAV.................................................................................... 21

Troubleshooting....................................22

Specifications.........................................23

Maintenance ..........................................23

Language Code......................................24

Contents

2

Thank you for purchasing this unit. This Owner’s Manual

explains the basic operation of this unit.

The region code for this set is 2.

Since it is usual for DVD movies to be

released at different times in different regions

of the world, all players have region codes and discs can

have an optional region code. This unit can play discs

containing the identical region code, or mentioned as

region “ALL”. If you load a disc of a different region code

to this unit, you will see the region code notice on the

screen. The disc will not play, and should be unloaded.

Environmental Information

This unit consists of materials which can be recycled and

reused if disassembled by a specialised company. Please

observe the local regulations regarding the disposal of

packaging materials, exhausted batteries and old

equipment.

Supplied accessories

– Remote control

– Batteries (two AA size) for remote control

– Audio pin cable

– Video pin cable

– Owner’s Manual

Notes about discs

– This unit is designed for use with DVD video, Video CD,

Super video CD, Audio CD, CD-R, CD-RW (MP3 Supported),

DVD+RW, DVD+R, DVD-R and DVD-RW.

– CD-R and CD-RW cannot be played unless finalized.

– Some discs cannot be played depending on the recording

conditions such as PC environment and application software.

The characteristics and condition of the discs; materials,

scratches, curvature, and etc, may result in failure.

– Be sure to use only CD-R and CD-RW discs made by

reliable manufacturers.

– Do not use any non standard shaped discs (heart, etc.)

– Do not use disc with tape, scals, or paste on it, damage

to the unit may result.

– Do not use a disc printed on its surface by a commercially

available label printer.

Cleaning discs

●

When a disc becomes dirty, clean it with a cleaning cloth.

Wipe the disc from the centre out. Do not wipe in a

circular motion.

●

Do not use solvents such as benzine, thinner,

commercially available cleaners, or antistatic spray

intended for analog records.

Symbols Used in this Manual

The below symbols appear in some headings and notes

with the following meanings:

●

Some DVD video discs require specific functions

or allow only limited functions during playback.

●

“

Ä

” may appears on the TV screen which

means that the function is not available on that

specific DVD video disc.

2

Manufactured under license from Dolby Laboratories. “Dolby”

and the double-D symbol are trademarks of Dolby

Laboratories.

”DTS” and ”DTS Digital Out” are trademarks of Digital

Theater Systems, Inc.

This product incorporates copyright protection technology that

is protected by method claims of certain U.S. patents and

other intellectual property rights owned by Macrovision

Corporation and other rights owners. Use of this copyright

protection technology must be authorized by Macrovision

Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

DVD

VCD

CD

– Description refers to playback of DVD-

video discs

– Description refers to playback of Video CDs

– Description refers to playback of Audio CDs

– Description refers to playback of Super

VCDs

SVCD

Introduction

3

English

Front and Rear Panels

Caution: Do not touch the inner pins of the jacks on the rear panel.

Electrostatic discharge may cause permanent damage to the unit.

STANDBY/ON

– to turn this unit to standby mode or

ON

Disc Tray

/ OPEN/CLOSE

– to open/close the disc tray

B PLAY

– to start playback

; PAUSE

– to interrupt playback

9 STOP

– to stop playback

S VIDEO

COAXIAL

– connect to S-Video input of your AV

receiver

– connect to DIGITAL INPUT of your

AV receiver

connect to DIGITAL INPUT of your

AV receiver

VIDEO

– connect to Video inputs of your AV

receiver

OPTICAL

–

MAINS

COMPONENT VIDEO OUT

– connect to a standard AC outlet

– connect to component video inputs of

your AV receiver

– connect to a TV with SCART

TV OUT

– connect to AUDIO inputs of your

AV receiver or stereo system

AUDIO OUT (Left/Right)

Functional Overview

4

Remote Control

* Press and hold button for about two seconds.

B/

|

– turn this unit ON or go to

standby-on mode

0-9 numeric buttons

– select numbered items in a menu

ON SCREEN

– access or remove player’s On

Screen Display menu

SETUP

– access or remove player’s setup

menu

T

– search forward* / next chapter or

track

SUBTITLE

– subtitle language selector

ANGLE

– select DVD camera angle

ZOOM

– enlarge video image

AUDIO

– audio language and format

selector

TOP MENU/RETURN

– display the top-level disc menu

(DVD) / go back to previous menu

(VCD)

MENU

– access menu of a disc (DVD) /

switch PBC on/off (VCD)

1 2 3 4

– (left/right/up/down) select an item

in the menu

ENTER/OK

– acknowledge menu selection

S

– search backward* / go to a

previous chapter or track

STOP ( 9 )

– stop playback

PLAY ( B )

– start playback

PAUSE ( ; )

– pause playback temporarily /

frame-by-frame playback

REPEAT

– repeat chapter, track, title, disc /

shuffle chapter, track

A-B

– repeat a specific segment

SCAN

– preview the content of a track or

whole disc (VCD) / play the first 6

seconds or less of each track (CD)

MUTE

– disable or enable sound output

Functional Overview

5

English

General Notes on connections

Never make or change connections with the power

switched on.

●

Depending on the equipment you wish to connect, there

are various ways you could connect this unit. Possible

connections are shown in the following drawings.

●

Please refer to the manuals of other equipment as

necessary to make the best connections.

●

Do not connect this unit via your VCR. The video quality

could be distorted by the copy protection system.

●

Do not connect this unit’s audio out jack to the phono in

jack of your audio system.

Digital Connections

This unit has COAXIAL and OPTICAL digital out jacks.

Connect one or both of them to your AV receiver

equipped with Dolby digital, DTS, or MPEG decoder

using each specific cable (separate purchase).

You will need to set this unit’s digital output to

All (see ‘DIGITAL OUTPUT’).

Note:

– If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will produce a

strong, distorted sound or no sound at all. Make sure to

select the appropriate audio format at menu screen

included on the disc.

Pressing AUDIO once or more may change not only audio

languages but also audio formats, and the selected format

appears for several seconds on the status window.

Analog Connections

Use audio/video cable supplied with this unit to connect

AUDIO OUT L (left) and R (right) jacks of this unit to

corresponding input jacks of your audio equipment such

as Stereo amplifier.

AV receiver

COAXIAL

IN

OPTICAL

IN

C

O

Stereo

amplifier

(supplied)

1 CD/DVD

RL

R

L

R

Preparation

6

Video Connections

If your AV receiver has video output jacks, connect your

receiver (and then to your TV) so that you can use one

TV for several different video sources (LD, VCR etc.) by

simply switching the input source selector of your

receiver.

The player has four types of video output jacks. Use one

of them in accordance with the input jacks of the

equipment to be connected.

S VIDEO terminal <A>

S (separate) video connection achieves a clearer picture

than composite video connection by separating color and

luminance when transmitting signals. Use commercially

available S-video cable. Receiver (and TV) with S-video

input is required.

VIDEO terminal <B>

Use audio/video cable supplied with this unit when

connecting the player to a TV.

COMPONENT VIDEO terminal <C>

Component video connection achieves high fidelity in

reproducing colors (better performance than S-video

connection), separating video signal into luminance (Y,

terminal color-coded as green), and color difference (Pb,

blue/Pr, red). Use commercially available coaxial cables.

Receiver (and TV) with component input is required.

Observe the color of each jack when connecting. If your

receiver does not have component output jacks,

connecting the player’s component output directly to

your TV’s component input can reproduce better video

image.

SCART Connection <D>

If your TV has only terminal for video input, and you want

to connect it directly to this unit, you can use this unit’s

TV OUT jack.

Note:

– Ensure that the “TV” indication on SCART cable is

connected to the TV set and “DVD” indication on SCART

cable is connected to this unit.

Connecting an AV receiver with a

SCART terminal

If your AV receiver has SCART terminals, you can

connect this unit’s TV OUT to your AV receiver’s SCART

terminal.

VIDEO

OUT

VIDEO

IN

COMPONENT

VIDEO OUT

COMPONENT

VIDEO IN

S VIDEO

OUT

S VIDEO

IN

COMPONENT

VIDEO IN

S VIDEO

INPUT

VIDEO

YPBCB PRCR

<C><A>

AV receiver

<B>

<D>

(supplied)

S

V

AV receiver

Preparation

7

English

Inserting batteries into the Remote

Control

1

Open the battery cover by pressing in the tab, then lift off

the cover.

2

Insert batteries with the correct polarity as indicated by

the +

and -

symbols inside the battery compartment.

3

Close the cover.

CAUTION!

– Remove batteries if they are exhausted or not to

be used for a long time.

– Do not use old and new or different types of

batteries in combination.

– Batteries contain chemical substances, so they

should be disposed off properly and kept away

from children.

Using the Remote Control

●

Direct the remote control at the remote sensor of the

DVD player.

●

Do not drop or give the remote control a shock.

●

Do not leave the remote control in extremely hot or

humid places.

●

Do not spill water or put anything wet on the remote

control.

PAL/NTSC Conversion

This player is equipped with a PAL/NTSC conversion

feature to convert the video output of the disc to match

your TV system. The conversions supported are as

below. To activate the conversion, refer to “TV TYPE”:

Notes:

– “MULTI” can only be selected when using a TV that has

both the PAL and NTSC systems.

– Slight picture distortions may occur due to this conversion.

This is normal. Thus, the “MULTI” is most suitable for the

best picture quality.

Turning on the power

1

Connect the AC power cord to the power outlet.

2

Turn on the TV and your AV receiver.

3

Select the appropriate input source at the AV receiver

that was used to connect to this unit. Refer to the

equipment owner’s manual for detail.

4

Turn this unit on.

5

Set the TV to the correct Video IN channel. (eg. EXT1,

EXT2, AV1, AV2, AUDIO/VIDEO, etc. (Refer to your TV

owner’s manual for detail)

➜

The front display lights up and the default screen

appears on the TV.

Smart Power On/Off

When in STOP or NO DISC mode, the DVD player will

switch to standby mode after 15 minutes without any

operations for saving energy. It is easily reactivated by

pressing the POWER or PLAY on the remote control or

the STANDBY/ON button on the front panel.

+

-

+

-

DVD

VCD

NTSC

NTSC NTSC

PAL

Type Format

Disc Output format

Selected mode

NTSC

PAL

PAL MULTI

Preparation

8

Basic Playback

1

Press STANDBY/ON on the front panel to turn on the

DVD player.

2

Press

/

(OPEN/CLOSE) on the front panel to open disc

loading tray.

3

Place the chosen disc in the tray, with the label facing up.

4

Press

/

(OPEN/CLOSE) again to close the tray.

➜

After recognizing this disc, the player begin to

playback automatically.

Notes:

– DVDs may have a region code. Your player will not play

discs that have a region code different from the region code

of your player.

– If ‘DISC LOCK’ is set to LOCK and the disc inserted is not

authorized, the 6-digit code must be entered and/or the disc

must be authorized (see ‘DISC LOCK’).

General Operation

Note: All instructions set out below refer to the remote

control, unless otherwise stated.

Video control during playback

STOP

1

You can resume the play from the point at which you

stopped last time, if you just press STOP once. It will start

from the beginning if you press STOP twice to stop

playback.

PAUSE/STEP

1

To get a still picture, press PAUSE during playback.

2

To step forward to the next frame picture, press PAUSE

again.

3

To resume normal playback, press PLAY.

SKIP

1

Press

¡1

or

2™

briefly during playback to go to the next

chapter/track or to return to the beginning of the currect

chapter/track respectively.

2

Press

¡1

twice briefly to step back to the previous

chapter/track.

3

To go directly to any chapter/track, enter the chapter/

track number using the numeric buttons and press

ENTER/OK.

Note: Press and hold

2™

or

¡1

for more than two seconds

to search forward or backward.

SEARCH

1

To search the contents in fast speed, press

2

or

1

for fast

forward/backward searching.

2

Press

2

or

1

again to increase the speed for searching.

3

Press PLAY to return to normal playback.

Slow Motion

1

To get a slow motion effect during playback, press

3

or

4

.

2

Press

3

or

4

again, you can get different playback

forward/backward speeds.

3

Press PLAY to return to normal play back.

1

To get a slow motion effect during playback, press

4

.

2

Press

4

again, you can get different playback forward

speeds.

3

Press PLAY to return to normal play back.

Note: The SLOW BACKWARD function is not available for

VCD/Super VCD discs.

Audio control during playback

MUTE

1

Press MUTE to disable the sound output.

2

Press MUTE again to deactivate the mute.

Audio channel selection

1

Super VCD has two stereo audio channels which are

used for playing karaoke or the audio language selection.

(for instance, you can choose one channel for only the

music background of the song while you play the

karaoke.)

2

Press AUDIO to select the audio channels you want.

3

VCD has only one stereo audio channel, you can select

STEREO, MONO LEFT, MONO RIGHT or MIX-

MONO by pressing AUDIO.

➜

STEREO: Output the left and right audio channels of

the disc through the left and right audio jacks accordingly.

➜

MONO LEFT: Output the left audio channels of the

disc through the left and right audio jacks.

➜

MONO RIGHT: Output the right audio channels of

the disc through the left and right audio jacks.

➜

MIX-MONO: each of the audio jacks can output the

same audio effect as stereo.

DVDDVD

VCDVCD

CDCD

SVCDSVCD

DVDDVD

VCDVCD

CDCD

SVCDSVCD

DVDDVD

VCDVCDVCD

CDCD

SVCDSVCDSVCD

DVDDVD

VCDVCD

SVCDSVCD

DVDDVD

VCDVCDVCD

CDCD

SVCDSVCDSVCD

VCDVCD

CDCD

SVCDSVCD

Operation

9

English

Repeat and Shuffle

●

Each time you press REPEAT, the Repeat/Shuffle mode

changes as follows;

* This feature may not be available with some discs.

With PBC OFF,

●

Each time you press REPEAT, the Repeat/Shuffle mode

changes as follows;

Repeat A-B

DVD-Video Discs: repeat a sequence in a title

Video and Audio CDs: repeat a sequence in a track

1

Press A-B at your chosen starting point.

2

Press A-B again at your chosen end point.

➜

The repeat sequence begins.

3

To exit the sequence, press A-B.

Disc Resume

This player can resume playback of the last 5 discs, even

if the disc was ejected or the power switched off.

1

Load one disc, which is one of the last 5 discs.

2

Press PLAY while “LOADING” is displayed on the

screen. If the information of this disc has been stored in

the memory of DVD player, it will be played back from

the stop point last time.

OSD (On-Screen Display)

This function will provide some information about your

playing disc on the screen.

●

Press ON SCREEN.

The Status window appears on the TV.

Title/Chapter/Track selection

1

Press

34

to select “TITLE” or “CHAPTER” (DVD) or

“TRACK” (VCD).

2

Press ENTER/OK.

3

Select a title, chapter or track number using the numeric

buttons.

Time Search

1

Press

34

to select “TT TIME” or “CH TIME”(DVD) or

“TRACK TIME” or “DISC TIME”(VCD).

➜

“TT TIME” refers to the total time of the current title,

and the “CH TIME” refers to the total time of the current

chapter.

2

Press ENTER/OK.

3

Enter hours, minutes and seconds from left to right using

the numeric buttons. (e.g. 0:34:27)

Audio/Subtitle/Angle

You can change “AUDIO”, “SUBTITLE” or “ANGLE” if

available on the disc you are playing.

1

Press

34

to select “AUDIO”, “SUBTITLE” or “ANGLE”.

2

Press ENTER/OK.

3

For Audio and Subtitle,

Press

34

to highlight your selection and press ENTER/

OK.

or

For Angle,

Select an angle using the numeric buttons.

Repeat/Time Display

1

Press

34

to select “REPEAT” or “TIME DISP.”.

2

Press ENTER/OK.

3

Press

34

to highlight your selection and press ENTER/

OK.

Time display

Each time you press ON SCREEN, the time display

changes as follows;

DVDDVD

Chapter Repeat* Title Repeat

ShuffleShuffle RepeatRepeat/Shuffle Off

VCDVCD

CDCD

Track Repeat Disc Repeat

ShuffleShuffle RepeatRepeat/Shuffle Off

DVDDVD

VCDVCD

CDCD

DVDDVD

VCDVCD

CDCD

SVCDSVCD

DVDDVD

VCDVCD

DVDDVD

VCDVCD

DVDDVD

VCDVCD

CDCD

Total Elapsed Total Remain

Single ElapsedSingle Remain

Operation

10

Zoom

The Zoom function allows you to change the image size.

1

Press ZOOM to activate the function.

➜

Use

341

2

to view other parts of the zoomed

picture.

➜

Playback will continue.

2

Press ZOOM repeatedly to return to the original size.

Special DVD Features

Playing a Title

A DVD disc may have one or more titles. This depends

on the content (a movie, video clips, a drama series, etc.)

on the disc.

●

After you load a disc, information about the content

shows on the screen waiting for your selection. You can

also press TOP MENU to turn back to the title menu

during playback.

➜

Press the appropriate numeric buttons or

341

2

to

highlight your selection.

➜

Press ENTER/OK to confirm.

Playing a Chapter

When you have selected a title, it may include one or

more chapters.

●

Any time you want to watch another chapter during

playback, press MENU to turn back to the chapter menu

(If disc has chapter menu).

➜

Press the appropriate numeric buttons or

341

2

on

the remote control to highlight your selection.

➜

Press ENTER/OK.

➜

After a chapter has been selected, you also can press

¡1

or

2™

to make a change.

Camera Angle

Some discs contain scenes which have been shot

simultaneously from various angles.

This DVD player allows you to select the desired camera

angle.

●

Press ANGLE on your remote control.

Note: The function is available only for the DVD discs which

have several angles recorded.

Changing the Audio Language and/or

format

●

Press AUDIO repeatedly to select the different

languages.

Note: The function will be activated only if the DVD is

recorded with multi-language audio tracks.

Subtitles

●

Press SUBTITLE repeatedly to select the different

subtitles.

Note: The function will be activated, only if the DVD or

Super VCD is recorded with multi-subtitles.

Special VCD & SVCD Features

Playback Control (PBC)

PBC function allows you to enter the index menu which

is used to select a track after loading the VCD & SVCD

disc.

If you want to activate the function during the playback or

after pressing STOP twice,

1

Press MENU to set the PBC On.

➜

Pay attention to the hint on the screen.

2

Use

¡1

or

2™

to select the page you like.

➜

If the items of the index menus are numbered, press

the appropriate numeric buttons.

➜

Press ENTER/OK.

3

Press RETURN to enter the index menu during the

playback.

Notes:

– The content of the index menu depends on the disc.

Please refer to the disc’s instructions for details.

– If the disc doesn’t include the PBC information, this

function will have no effect.

If you want to skip the index menu and playback

directly from the beginning,

1

Press MENU to switch off the function.

DVDDVD

VCDVCD

SVCDSVCD

DVDDVD

SVCDSVCDSVCD

Operation

11

English

Preview Function

●

Press SCAN to enter previewing menu.

●

Press

34

to highlight “TRACK DIGEST”, “DISC

INTERVAL” or “TRACK INTERVAL”.

●

Press ENTER/OK to open one option.

●

After you enter the menu of any digest type,

➜

To quit preview function: Press

341

2

to highlight

EXIT and press ENTER/OK.

➜

To return to the previewing menu for selecting the

other digest type: Press

341

2

to highlight MENU and

press ENTER/OK.

1

TRACK DIGEST

This function will minimize the picture of every track in

order to display every six of these tracks on the screen to

help you know the content of every track on the disc.

- To choose the desired track, press

341

2

to highlight

the second line and input your selected track number

next to “SELECT”.

➜

Select the others from the current six by pressing the

¡1

or

2™

to open the previous or next page and press

ENTER/OK.

2

DISC INTERVAL

This function is used to divide a disc into six parts by

regular intervals and display them on one page to help

you preview the whole disc.

- To choose the desired track, press

341

2

to highlight

the second line and input your numerical selection next

to “SELECT” and press ENTER/OK.

3

TRACK INTERVAL

This function is used to divide a single track into six parts

by regular intervals and display them on one page to help

you preview the selected track.

- To choose the desired track, please press

341

2

to

highlight the second line and input your numerical

selection next to “SELECT” and press ENTER/OK.

VCDVCD

SVCDSVCD

TRACK DIGEST

SELECT DIGEST TYPE:

DISC INTERVAL

TRACK INTERVAL

TYPE : TRACK

EXIT

MENU NEXT

SELECT (01–17) : – –

TYPE : DISC INTERVAL

EXIT

MENU

SELECT (01–06) : – –

TYPE : TRACK 01 INTERVAL

EXIT

MENU

SELECT (01–06) : – –

Operation

12

This player can playback JPEG format pictures and MP3

files on a personally recorded CD-R/RW disc or

commercial CD, and is compatible with Kodak Picture

CD.

●

Playback pictures or songs one by one automatically.

●

Album and track selection.

●

Repeat (disc / album / track / picture).

●

Select any music or pictures from the disc to playback

them together.

●

Maximum files numbers in one folder is 500.

●

Maximum files Programmable is 100.

General Operation

●

If you choose WITH MENU in the Setup Menu (Please

refer to the MP3 & JPEG navigator below), the JPEG CD/

MP3 CD menu will be shown on the screen before

playback.

●

At any time during JPEG playback, press MENU to return

to the menu.

●

To open the selected folder, press ENTER/OK.

●

The menu shows six files or folders at a time. To move

to the next (or previous) page, press

2™

(or

¡1

).

MP3 & JPEG Navigator

To select a different playback method, follow the steps

below.

1

At STOP mode, press SETUP to open the setup menu.

2

Press

1

2

to highlight PREFERENCE icon.

3

Press

4

to open the PREFERENCE menu.

4

Press

34

to highlight the MP3/JPEG NAV menu.

5

Press

2

to enter the menu.

6

Press

34

to highlight the WITHOUT MENU or WITH

MENU item.

➜

WITHOUT MENU: automatically playback all files in

according date sequence.

➜

WITH MENU: playback files in the selected folder.

7

Press ENTER/OK to confirm your selection.

Play Mode

Auto Playback

If you choose WITHOUT MENU, the DVD player will

automatically play JPEG CD/MP3 CD in sequence when

it is loaded.

Repeat / Shuffle

●

When the JPEG CD/MP3 CD menu is shown on the

screen, Press REPEAT repeatedly, the button beside

PLAY MODE will display different option,

➜

Repeat One: One file will be replayed time after time.

➜

Repeat Folder: All files in this folder will be replayed

time after time.

➜

Shuffle: All files in this folder will be played at random

without any repeat.

➜

Folder: All files in this folder will be played.

●

If you press REPEAT during playback, the option will be

displayed on the screen accordingly.

●

During Shuffle mode, you can skip tracks by pressing

¡1

or

2™

.

00:00 00:00

1

001

002

003

004

005

006

JPEG & MP3 CD Playback

13

English

Special JPEG Features

Function Introduction

JPEG CD is a disc with a collection of JPEG format

pictures, and all extension filenames should end with

‘.JPG’. The CD can be recorded on any computer, and

pictures may be from digital camera or scanner. If the

customers prefer, they can make this CD become a

Digital Album.

You can choose any general function introduced in

General Operation, besides, you also can,

●

Display the thumbnails of 12 pictures.

●

Zoom the picture.

●

Rotate the picture.

●

Flip the picture vertically or horizontally.

●

Scan pictures by different effects.

Preview Function

This function shows the content of the current folder or

the whole disc.

1

Press STOP during playback of JPEG pictures. You will see

the thumbnails of 12 pictures on the screen.

2

Press

¡1

or

2™

to display the other pictures on the next

or the previous page.

3

Press

341

2

to highlight one of them and press ENTER/

OK to playback, or,

Move the cursor to highlight on the bottom of the

page to start playback from the first picture on the

current page.

4

Press MENU to go to the JPEG CD/MP3 CD menu.

Zoom picture

●

During playback, press ZOOM to display the picture with

different scales.

●

Press

341

2

to view the rest of the zoomed picture.

Playback with multi-angles

When displaying one picture on TV screen

●

Press

341

2

to get different effects.

3

: Flip the picture vertically.

4

: Flip the picture horizontally.

1

: rotate the picture anti-clockwise.

2

: rotate the picture clockwise.

Wipe Effect

●

Press ANGLE repeatedly to choose different wipe

effects.

Special MP3 Features

Function Introduction

“MP3” stands for “MPEG Audio Layer-3”. and is a part of

the MPEG standard. A CD can store up to 10 hours of

MP3 audio, which is nearly 10 times as much as an Audio

CD. Each song is recorded as a file. You can choose any

general function introduced in General Operation. You

can also choose different playback speeds.

JPEG and MP3 simultaneous playback

1

Firstly playback MP3 music according to the instructions

introduced in playback Selection.

2

Then select a picture to playback. Refer to the

instructions introduced in playback Selection.

➜

Now the pictures will be played back in sequence

together with MP3 music.

3

To quit simultaneous playback, press MENU to return to

the JPEG CD/MP3 CD menu, then pictures will be

stopped. After that, press STOP, then MP3 music will be

stopped as well.

Note: In the function of JPEG and MP3 Simultaneous

Playback,

¡1

and

2™

are invalid for MP3.

JPEG & MP3 CD Playback

14

Basic Operation

1

Press SETUP in the STOP mode to enter the Setup

Menu.

2

Press

1

2

to enter the submenu or return to the previous

menu.

3

Press

34

to highlight the desired menu.

4

Press SETUP to quit the setup menu.

➜

When you quit the setup menu, the settings will be

stored in the player’s memory even if the player is

switched to power off.

General Setup menu

Some settings need to be made in this menu. They are:

“DISC LOCK”, “PROGRAM”, “OSD LANGUAGE” and

“SCREEN SAVER”.

Follow the steps below:

1

Press SETUP to enter the setup menu.

2

Press

1

2

to choose the GENERAL SETUP icon .

DISC LOCK

When the disc is locked, the player will store its specific

code into the memory for future identification. For the

next playback, the DVD player will prompt you to enter

the password. Then, press ENTER/OK to load the disc.

1

Press

34

to highlight “DISC LOCK”.

2

Enter its submenu by pressing

2

.

➜

Lock: Lock the disc being played.

➜

Unlock: unlock the disc.

3

Press

1

to return to the General Setup Page.

PROGRAM (not for JPEG / MP3 CD)

1

Press

34

to choose “PROGRAM”.

2

Press

2

to move the cursor to the field of the submenu

to choose the item Input menu.

➜

Input menu: Enter the Program item.

3

Press ENTER/OK to enter the program page.

Input your favorite track

1

Input valid track number by pressing the numeric buttons.

2

Press

341

2

to move the cursor to the next selected

position.

➜

If the track number is more than ten, press

2™

to

open the next page and go on programing, or press

341

2

to highlight NEXT button, and then press ENTER/OK.

3

Repeat this steps to input another track number until the

whole program is completed.

Remove a track

1

Press

341

2

to move the cursor to the track you want

to remove.

2

Press ENTER/OK or PLAY to remove this track from the

program menu.

Playback tracks

When programing is completed,

1

Press

341

2

to move the cursor to the START button.

2

Press ENTER/OK.

➜

DVD player will playback the selected tracks under

the programed sequence.

Quit the program playback

In the Program menu,

1

Press

341

2 to move the cursor to the EXIT button.

2 Press ENTER/OK to quit this menu.

Stop the program playback

● During playback of the programmed tracks, press STOP.

Then after you press PLAY, the DVD player will resume

normal playback.

DISC LOCK

PROGRAM

OSD LANGUAGE

SCREEN SAVER

- - GENERAL SETUP PAGE - -

PROGRAM:TRACK(01-13)

EXIT START NEXT

1

2

3

4

5

7

8

9

10

_ _

02

01

05

_ _

6

03

_ _

Setup Menu

15

English

Repeat the program playback

●

During playback of the programmed tracks, press

REPEAT. The programed tracks can be played again.

Note: If you select Shuffle mode by pressing REPEAT several

times, the DVD player cancels program playback.

OSD LANGUAGE

This option is to select a language for information

displayed on TV screen.

1

Press

34

to highlight “OSD LANGUAGE” in the

General Setup menu.

2

Enter its submenu by pressing

2

.

3

Move the cursor by pressing

34

to highlight the selected

language.

4

Press ENTER/OK to confirm.

5

Press

1

to return to the General Setup Page.

SCREEN SAVER

This function is used to turn the screen saver on or off.

1

Press

34

to highlight “SCREEN SAVER” in the General

Setup menu.

2

Enter its submenu by pressing

2

.

3

Move the cursor by pressing

34

to highlight the selected

item.

➜

On: In STOP or No DISC mode, if no actions are

performed within 5~6 minutes, the screen saver will be

activated.

➜

Off: Screen saver is disabled.

4

Press ENTER/OK.

5

Press

1

to return to the General Setup Page.

Audio Setup menu

There are items included in Audio Setup Page such as

“SPEAKER SETUP”, “DIGITAL AUDIO SETUP”,

“EQUALIZER” and “3D”.

1

Press SETUP to enter the setup menu.

2

Press

1

2

to choose the AUDIO SETUP icon .

SPEAKER SETUP

This menu contains setup options for your analog audio

output, such as “DOWNMIX”, “DRC” (Dynamic Range

Compression) etc. which makes the setup system

reproduce high quality surround sound.

DOWNMIX

1

Press

34

to highlight the “DOWNMIX”.

2

Enter its submenu by pressing

2

.

3

Move the cursor by pressing

34

to highlight the selected

item.

●

LT/RT

➜

This option should be used only if your DVD player

is connected to a Dolby Prologic decoder.

●

STEREO

➜

This option will downmix Dolby Digital signals directly

into analogue stereo from L/R jacks.

●

VIRTUAL SURROUND

➜

This option will reproduce the surround channels

virtually.

4

Press ENTER/OK.

5

Press

1

to return to the Audio Setup Page.

DRC (Dynamic Range Compression)

The DVD player will compress the dynamic range of its

sound output for late-night listening.

1

Press

34

to highlight “DRC”.

2

Enter its submenu by pressing

2

.

3

Move the cursor by pressing

34

to highlight the selected

item.

➜

ON: Enable DRC.

➜ OFF: Disable DRC.

4 Press ENTER/OK.

5 Press 1 to return to the Audio Setup Page.

- - AUDIO SETUP PAGE - -

SPEAKER SETUP

DIGITAL AUDIO SETUP

EQUALIZER

3D

Setup Menu

16

DIGITAL AUDIO SETUP

In this menu, you can set up the digital audio output signal

from the digital jacks, such as coaxial etc.

DIGITAL OUTPUT

1

Press

34

to highlight DIGITAL OUTPUT.

2

Enter its submenu by pressing

2

.

3

Press

34

to highlight the selected item.

➜

ALL: Original digital signals output. In this mode, all

audio settings except MUTE are invalid.

➜

PCM Only: If your receiver is PCM-compatible, or

your receiver can not decode MPEG-2, Dolby Digital, or

DTS audio, choose this option.

4

Press ENTER/OK.

5

Press

1

and return to the Audio Setup Page.

Note: If DIGITAL OUTPUT is set to “ALL”, all audio settings

except MUTE are invalid.

LPCM OUTPUT

In this menu, you can select PCM digital output between

48kHz and 96kHz.

1

Press

34

to highlight the “LPCM OUTPUT”.

2

Enter its submenu by pressing

2

.

3

Move the cursor by pressing

34

to highlight the selected

item.

➜

48K: 96kHz (if available on disc) PCM data stream will

be converted to 48kHz.

➜

96K: If the 96kHz disc is copy protected, the digital

output will be muted to comply with the standards.

4

Press ENTER/OK.

5

Press

1

to return to the Audio Setup Page.

EQUALIZER (Sound Mode)

The “EQUALIZER” allows you to select from various

preset modes that control the frequency bands of sound

to optimize certain musical styles.

It greatly enhances the excitement and enjoyment of your

favourite music.

1

Press

34

to highlight the “EQUALIZER”.

2

Enter its submenu “SOUND MODE” by pressing

2

.

3

Press

2

.

4

Move the cursor by pressing

34

to highlight the selected

item.

➜

NONE: Play the disc under the original sound effect.

5

Press ENTER/OK.

6

Press

1

to return to the Audio Setup Page.

Note: The sound may be distorted if the selected sound

mode is incompatible with the disc contents.

In that case, select another sound mode or “NONE”.

3D (REVERB MODE)

The “3D” can simulate the echoes and frequency

response of some particular places so as to make you feel

like personally on the place.

1

Press

34

to highlight the “3D”.

2

Enter its submenu “REVERB MODE” by pressing

2

.

3

Press

2

.

4

Move the cursor by pressing

34

to highlight the selected

item.

➜

OFF: Play the disc under the original sound effect.

5

Press ENTER/OK.

6

Press

1

to return to the Audio Setup Page.

Setup Menu

Pagina se încarcă...

Yamaha DV-SL100 Manualul proprietarului

Yamaha DV-SL100 Manualul proprietarului

în alte limbi

Lucrări înrudite

Alte documente