Yamaha VXC8SB Manualul proprietarului

Marca: Yamaha

Model: VXC8SB

Tip: Manualul proprietarului

Acest manual este potrivit și pentru

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe place for future reference.

This product is a speaker system designed for background music and public address

applications in places such as stores, restaurants and other commercial spaces. Do not

use for any purposes other than the one intended. Those who are unfamiliar with handling

or those who can not handle according to this manual such as children, should be

supervised by responsible persons to ensure safety.

Always consult a professional installer if the product installation requires construction work.

WARNING

Always follow the basic precautions listed

below to avoid the possibility of serious

injury or even death from electrical shock,

short-circuiting, damages, fire or other

hazards. These precautions include, but

are not limited to, the following:

If you notice any abnormality

• If any of the following problems occur,

immediately turn off the power of the amplifier.

- Unusual smells or smoke are emitted.

- Some object, or water has been dropped

into the product.

- There is a sudden loss of sound during use

of the product.

- Cracks or other visible damage appear on

the product.

Then have the product inspected or repaired

by qualified Yamaha service personnel.

Do not open

• This product contains no user-serviceable

parts. Do not attempt to disassemble the

internal parts or modify them in any way.

Water warning/Fire warning

• Do not expose the product to rain, use it near

water or in damp or wet conditions, or place on

it any containers (such as vases, bottles or

glasses) containing liquids which might spill

into any openings.

• Do not place any burning items or open flames

near the product, since they may cause a fire.

Hearing loss

• When turning on the AC power in your audio

system, always turn on the power amplifier

LAST, to avoid hearing loss and speaker

damage. When turning the power off, the

power amplifier should be turned off FIRST for

the same reason.

CAUTION

Always follow the basic precautions listed

below to avoid the possibility of physical

injury to you or others. These precautions

include, but are not limited to, the

following:

Location and connection

• Do not place the product in an unstable

position or a location with excessive vibration,

where it might accidentally fall down and cause

injury.

• Keep this product out of reach of children, to

keep them from putting their fingers into

openings on the product and accidentally being

injured. This product is not suitable for use in

locations where children are likely to be present.

• Do not place the product in a location where it

may come into contact with corrosive gases or

salt air. Doing so may result in malfunction.

• Do not place the product in a location where it

may be exposed to smoke or oil vapors, or

where any of its parts might deteriorate and

cause malfunction.

• Before moving the product, remove all

connected cables.

• Do not use the speaker’s carrying band for

suspended installation. Doing so can result in

damage or injury.

• Always consult a professional installer if the

product installation requires construction work,

and make sure to observe the following

precautions.

- Choose mounting hardware and an

installation location that can support the

weight of the product.

- Avoid locations that are exposed to constant

vibration.

- Use the required tools to install the product.

- Inspect the product periodically.

• Use only speaker cables for connecting

speakers to the speaker jacks. Use of other

types of cables may result in fire.

Handling caution

• Do not insert your fingers or hands in any gaps

or openings on the product (release levers,

bass reflex ports, clamps).

• Do not rest your weight on the product or place

heavy objects on it.

• When using a low-impedance connection,

make sure that the output power of the

amplifier is lower than the power capacity of

this product. When using a high-impedance

connection, be sure that the total rating of the

transformer taps of the speakers does not

exceed the output power of the amplifier. If the

output power is higher than the power

capacity, malfunction or fire may occur.

• Do not input excessively loud signals that may

result in clipping in the amplifier or cause the

following:

- Feedback, when using a microphone

- Continuous and extremely loud sound from a

musical instrument, etc.

- Continuous and excessively loud distorted

sound

- Noise caused by plugging/unplugging the

cable while the amplifier is turned on

Even if the output power of the amplifier is

lower than the power capacity of this product

(program), damage to the product,

malfunction or fire may occur.

PA_en_11

General Specifications

Unpacking

Unpack the contents and confirm that all the

following items are included.

• Speaker × 1

•Grille × 1

• Safety wire × 1

• Cutout template × 1

• Owner’s Manual (this manual)

* Speaker cable is not included.

Accessories (sold separately)

Installation Support Bracket Kit (AB-C8S)

Bundled Items

• Tile rails × 2

• O-ring × 1

• Screws (S-TITE M4, 8 mm) × 2

* This manual covers the installation method using the AB-C8S Reinforcing Bracket Kit.

WARNING

Always use AB-C8S for Installing the speaker.

*1 Half-space (2π)

*2 Calculated based on power rating and sensitivity, exclusive of power compression.

The contents of this manual apply to the latest specifications as of the

publishing date. To obtain the latest manual, access the Yamaha website then

download the manual file.

The dimensions are shown in “Dimensions” on the back side of the manual.

Type Subwoofer, Band-pass

Component 8" (20 cm) cone

Nominal impedance 8Ω

Power rating NOISE 100 W

PGM 200 W

MAX 400 W

Sensitivity (1 W, 1 m)

88 dB SPL

Maximum SPL

(Calculated, 1m, Peak)

114 dB SPL

Frequency range (-10 dB)

44 Hz–200 Hz

Connector Euroblock (4-pin) × 1

(input: +/-, loop-thru: +/-)

Min. wire size AWG24 (0.2 sq)

Max. wire size AWG12 (3.5 sq)

Transformer

taps

100 V 7.5 W, 15 W, 30 W, 60 W

70 V 3.8 W, 7.5 W, 15 W, 30 W, 60 W

Overload protection Full-range power limiting, to protect network

and transducers

Magnetically shielded No

Enclosure Shape Round

Cabinet

material

Steel 1.2 mm, black

Baffle

material

ABS V-0, 5 mm, black

Grille Material Metal grille: Powder coated perforated steel

0.6 mm

Trim Ring: ABS V-0

Aperture ratio: 46%

Finish VXC8SB: black paint

(approximate value: Munsell N3.0)

VXC8SW: white paint

(approximate value: Munsell N9.3)

Dimensions

(including grille)

Ø324 × D314 mm

Net Weight (including grille) 8.7 kg

Cutout size Ø285 mm

Required ceiling board

thickness

5 mm–37 mm

Conduit tube Ø15.4 mm–Ø21.3 mm

Packaging Single-unit (1 pc.)

Material and weight of the Installation Support Bracket Kit (AB-C8S): steel, 1.0 kg

Connecting the Cable

Wiring and installation shall be in

accordance with the National Electrical

Code, NFPA70 for United States,

Canadian Electrical Code, CSA C22.1 for

Canada and the local authority having

jurisdiction.

Using Loop-Through Terminals

For this method, cables are connected from terminals 1 and 4 to the

subsequent speaker. Cables with a thickness of at least AWG24 (0.2 sq)

and up to AWG12 (3.5 sq) can be used. If the Euroblock plug is

disconnected from a speaker, all subsequent speakers will not work. This

can be useful to identify which speaker has a problem.

Paralleling Input Terminals

For this method, cables are connected to terminals 2 and 3 of each

speaker. Connect two cables to one terminal. Cables with a thickness up

to AWG 17 can be used. Since the cables are connected via Euroblock

plugs, subsequent speakers can work properly.

From amplifier or

previous speakers

To subsequent

speakers

Power

amplifier

Speaker

subsequent

speakers

Euroblock

plug

From amplifier or

previous speakers

To subsequent

speakers

Power

amplifier

Speaker

subsequent

speakers

Euroblock

plug

CAUTION

• When connecting with low impedance, take note of the total impedance.

• When connecting speakers with high impedance, be sure that the total rated input capac-

ity of the speakers does not exceed the output power of the amplifier.

NOTICE

When using a high-impedance speaker connection, make sure the audio signal is passed through an

60 Hz or above high-pass filter before being input to the speakers.

Installing the Speaker

Before installing the speaker onto the ceiling, ensure that the strength of the

ceiling rail is sufficient.

Pre-installation (Preparation of the Cable)

• For cables attached to the Euroblock

plug, strip the insulation as shown in the

figure and connect them.

1. Put the supplied cutout template to the ceiling and draw a circle by

tracing it.

Make sure to use the cutout template so that hole is the correct

diameter.

If you use a circular cutter, set the diameter using the cutout template.

2. Cut the hole by tracing the circle.

1. Insert the two tile rails through the cut hole and place them on the ceiling

surface within your reach. Adjust their length and be sure that each of

the tile rails are oriented as shown below.

2. Insert the folded O-ring through the cut hole and open it within the

ceiling.

3. Secure the O-ring and tile rails with the supplied two screws through

either slot of both O-ring brackets.

1. Pull the wiring from the power amplifier through the cut hole of the

ceiling.

2. Loosen the screws of one of the two terminal covers according to the

wiring direction and remove the terminal cover.

Pass the cable through the terminal cover.

In this manual, the illustrations show the top terminal cover removed.

The terminal covers do not have a hole

through which the speaker cable passes.

Open a hole in the terminal cover (as shown)

to use.

3. Remove the Euroblock plug from the speaker. After loosening the

terminal screws of the Euroblock plug with a flat-blade screwdriver,

insert the cable into each terminal and tighten the screws. For the

connection, refer to section “Connecting the Cable.” Make sure that

cables cannot be pulled out.

Use a flat-blade screwdriver with a

blade less than 3 mm.

4. Plug the connected Euroblock plug into the socket in the speaker.

5. Tighten the screw and then attach the terminal cover.

NOTICE

When installing the speakers, turn off the power amplifier.

NOTE

Do not plate core wires by soldering if

the cable uses stranded wire. Doing so

will cause the wire to break.

NOTICE

Make sure that the release

lever of the baffle front is in the

position as shown in the figure.

Cut Out a Hole in the Ceiling

CAUTION

Wear goggles to prevent chips or powder entering your eyes

while cutting the hole.

Install the Tile Rails and O-ring

WARNING

Always use AB-C8S for Installing the speaker.

About 7 mm

Compatible cable:

Min. AWG24 (0.2 sq)

Max. AWG12 (3.5 sq)

Release lever

O-ring

Tile rail

Connect the Wiring to the Connector

CAUTION

Use an appropriate tool for open-

ing the hole. Otherwise, injury

may result if you attempt to open

the hole with your bare hands.

Terminal cover

Speaker cable

Terminal screw

Loosen

Flat-blade

screwdriver

Euroblock plug

Tighten

Less than 3 mm

1. Attach the safety wire to the safety wire ring, and connect the wire to an

independent support point, such as a joist.

3. While slightly lifting up the speaker, turn the screwdriver clockwise to

tighten the attachment screw.

The attachment screws are indicated by marks.

The first turn of the attachment screw opens the clamp. Further turns

move the clamp down the channel to pull the speaker up into the ceiling.

When the clamp is difficult to open, turning the screwdriver halfway

counterclockwise once will make it easier to open the clamp.

Select the line voltage/impedance (100V, 70V,

8Ω) and power tap for a 100V, 70V line distributed

system, by rotating the tap selector switch on the

front side of the speaker with a flat-blade

screwdriver. When using the speaker with a high-

impedance connection, select the position where

wattage is indicated by the line (100V, 70V). Do

not select the “ × ” setting when connecting to a

100V line. When using it with low impedance

connection, select the 8Ω position.

Attach the string to the speaker as shown in the figure, and then fit the grille

to the magnets (8 places) on the baffle front.

Fix the Speaker onto the Ceiling

CAUTION

Always take measures to prevent the speaker from falling

down.

If the safety wire is too short, prepare another wire appropri-

ate for the speaker weight and installation conditions. If the

wire is too long, should the speaker fall, the wire may break

as a result of too much strain.

NOTICE

Do not over-tighten the attachment screws. Otherwise, the attachment

screws and clamps will break.

CAUTION

Do not turn any screws other than the attachment screws.

Otherwise, the speaker may fall or malfunction.

Safety wire

ring

2. Push the speaker slowly up into

the ceiling, taking care not to trap

the speaker cable, carrying band

or safety wire.

Carrying band

Safety wire

Speaker cable

Anti-Drop tab

Make sure the release lever

is in the position of the figure.

If it is set to the position of the

figure, when all the Anti-Drop

tabs cross over the O-ring,

the speaker is held

temporarily.

Release lever

Anti-Drop tab

Attachment

screw

Clamp

Attachment

screw

Removing from the Ceiling

Loosen the attachment screws by turning them counterclockwise.

The attachment screws are indicated by mark.

Loosen the screw and the clamp goes up, and as it reaches the top,

the clamp closes as shown in figure below.

While slightly lifting up the speaker, secure it by moving the release lever

of the baffle front to the direction of the arrow as shown in the figure.

3. Remove the safety wire from the speaker that is detached from the

ceiling.

Set the Line Voltage/Impedance and Power

NOTICE

• Make sure the amplifier is switched off before

operating the tap selector switch.

• If the setting is incorrect, it may cause malfunc-

tion of the speaker and amplifier.

Attach the Grille

CAUTION

The grille may fall down if it is attached inadequately. Attach it

firmly.

Clamp

Attachment

screw

Attachment

screw

The illustration

indicates the setting

at 30W for a 100V

line and 15W for a

70V line.

Magnet

Incorrectly attached Correctly attached

SPEAKER SYSTEM

VXC8SB VXC8SW

Owner’s Manual

English

VCM7660

NOTICE

To avoid the possibility of malfunction/damage to

the product or damage to other property, follow

the notices below.

 Handling and maintenance

• Do not expose the product to excessive dust or

vibration, or extreme cold or heat, in order to

prevent the possibility of panel disfiguration,

unstable operation, or damage to the internal

components.

• When using a high-impedance speaker

connection, make sure the audio signal is

passed through an 60 Hz or above high-pass

filter before being input to the speakers.

• Do not touch the speaker driver unit, since it

might cause malfunction.

• Be sure to observe the amplifier’s rated load

impedance, particularly when connecting

speakers in parallel at low impedance.

Connecting an impedance load outside the

amplifier's rated range can damage the

amplifier.

• Do not place vinyl, plastic or rubber objects on

the product, since this might cause alteration

or discoloration of the panel.

• When cleaning the product, use a dry and soft

cloth. Do not use paint thinners, solvents,

cleaning fluids, or chemical-impregnated

wiping cloths, since this might cause alteration

or discoloration.

• Protection Circuit

This speaker system has an internal protection

circuit that shuts off the speaker unit when an

excessive input signal is applied. If the

speaker unit emits no sound, reduce the

volume level of the amplifier immediately. (The

sound will return automatically in several

seconds.)

• Do not place the speaker face down with the

grille attached, as deformation of the grille may

result.

• When placing the speaker face down, always

place it on a flat surface.

• Air blowing out of the bass reflex ports is

normal, and often occurs when the speaker is

handling program material with heavy bass

content.

Information

 About this manual

• The illustrations as shown in this manual are for

instructional purposes only.

• The company names and product names in

this manual are the trademarks or registered

trademarks of their respective companies.

 About disposal

• This product contains recyclable components.

When disposing of this product, please contact

the appropriate local authorities.

Yamaha cannot be held responsible for

damage caused by improper use or

modifications to the product.

ADDRESS LIST

Head Office/Manufacturer: Yamaha Corporation 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, Japan

(For European Countries) Importer: Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany

CANADA

Yamaha Canada Music Ltd.

135 Milner Avenue, Toronto, Ontario,

M1S 3R1, Canada

Tel: +1-416-298-1311

U.S.A.

Yamaha Corporation of America

6600 Orangethorpe Avenue, Buena Park, CA 90620,

U.S.A.

Tel: +1-714-522-9011

MEXICO

Yamaha de México, S.A. de C.V.

Av. Insurgentes Sur 1647 Piso 9, Col. San José

Insurgentes, Delegación Benito Juárez, México, D.F.,

C.P. 03900, México

Tel: +52-55-5804-0600

BRAZIL

Yamaha Musical do Brasil Ltda.

Rua Fidêncio Ramos, 302 – Cj 52 e 54 – Torre B – Vila

Olímpia – CEP 04551-010 – São Paulo/SP, Brazil

Tel: +55-11-3704-1377

ARGENTINA

Yamaha Music Latin America, S.A.,

Sucursal Argentina

Olga Cossettini 1553, Piso 4 Norte,

Madero Este-C1107CEK,

Buenos Aires, Argentina

Tel: +54-11-4119-7000

PANAMA AND OTHER LATIN

AMERICAN COUNTRIES/

CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A.

Edif. Torre Banco General, Piso 7, Urbanización

Marbella, Calle 47 y Aquilino de la Guardia,

Ciudad de Panamá, República de Panamá

Tel: +507-269-5311

THE UNITED KINGDOM/IRELAND

Yamaha Music Europe GmbH (UK)

Sherbourne Drive, Tilbrook, Milton Keynes,

MK7 8BL, U.K.

Tel: +44-1908-366700

GERMANY

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-303-0

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Europe GmbH, Branch Switzerland

in Thalwil

Seestrasse 18a, 8800 Thalwil, Switzerland

Tel: +41-44-3878080

AUSTRIA/BULGARIA/

CZECH REPUBLIC/HUNGARY/

ROMANIA/SLOVAKIA/SLOVENIA

Yamaha Music Europe GmbH

Branch Austria

Schleiergasse 20, 1100 Wien, Austria

Tel: +43-1-60203900

POLAND

Yamaha Music Europe GmbH

Sp.z o.o. Oddział w Polsce

ul. Wielicka 52, 02-657 Warszawa, Poland

Tel: +48-22-880-08-88

MALTA

Olimpus Music Ltd.

Valletta Road, Mosta MST9010, Malta

Tel: +356-2133-2093

NETHERLANDS/BELGIUM/

LUXEMBOURG

Yamaha Music Europe Branch Benelux

Clarissenhof 5b, 4133 AB Vianen, The Netherlands

Tel: +31-347-358040

FRANCE

Yamaha Music Europe

7 rue Ambroise Croizat, Zone d'activités de Pariest,

77183 Croissy-Beaubourg, France

Tel: +33-1-6461-4000

ITALY

Yamaha Music Europe GmbH, Branch Italy

Via Tinelli N.67/69 20855 Gerno di Lesmo (MB), Italy

Tel: +39-039-9065-1

SPAIN/PORTUGAL

Yamaha Music Europe GmbH Ibérica, Sucursal en

España

Ctra. de la Coruña km. 17,200, 28231

Las Rozas de Madrid, Spain

Tel: +34-91-639-88-88

GREECE

Philippos Nakas S.A. The Music House

19th klm. Leof. Lavriou 190 02 Peania – Attiki,

Greece

Tel: +30-210-6686168

SWEDEN/FINLAND/ICELAND

Yamaha Music Europe GmbH Germany filial

Scandinavia

JA Wettergrensgata 1, 400 43 Göteborg, Sweden

Tel: +46-31-89-34-00

DENMARK

Yamaha Music Denmark,

Fillial of Yamaha Music Europe GmbH, Tyskland

Generatorvej 8C, ST. TH. , 2860 Søborg, Denmark

Tel: +45-44-92-49-00

NORWAY

Yamaha Music Europe GmbH Germany -

Norwegian Branch

Grini Næringspark 1, 1332 Østerås, Norway

Tel: +47-6716-7800

CYPRUS

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-303-0

RUSSIA

Yam ah a Mu si c ( Ru ss ia ) LL C.

Room 37, entrance 7, bld. 7, Kievskaya street, Moscow,

121059, Russia

Tel: +7-495-626-5005

OTHER EUROPEAN COUNTRIES

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-3030

Yam ah a Mu si c G ul f F ZE

JAFZA-16, Office 512, P.O.Box 17328,

Jebel Ali FZE, Dubai, UAE

Tel: +971-4-801-1500

TURKEY

Yamaha Music Europe GmbH

Merkezi Almanya Türkiye İstanbul Şubesi

Mor Sumbul Sokak Varyap Meridian Business 1.Blok

No:1 113-114-115

Bati Atasehir Istanbul, Turkey

Tel: +90-216-275-7960

OTHER COUNTRIES

Yam ah a Mu si c G ul f F ZE

JAFZA-16, Office 512, P.O.Box 17328,

Jebel Ali FZE, Dubai, UAE

Tel: +971-4-801-1500

THE PEOPLE’S REPUBLIC OF CHINA

Yamaha Music & Electronics (China) Co.,Ltd.

2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,

Shanghai, China

Tel: +86-400-051-7700

INDIA

Yama ha M usi c In dia Private Limited

P-401, JMD Megapolis, Sector-48, Sohna Road,

Gurugram-122018, Haryana, India

Tel: +91-124-485-3300

INDONESIA

PT. Yamaha Musik Indonesia (Distributor)

Yamaha Music Center Bldg. Jalan Jend. Gatot Subroto

Kav. 4, Jakarta 12930, Indonesia

Tel: +62-21-520-2577

KOREA

Yamaha Music Korea Ltd.

11F, Prudential Tower, 298, Gangnam-daero,

Gangnam-gu, Seoul, 06253, Korea

Tel: +82-2-3467-3300

MALAYSIA

Yamaha Music (Malaysia) Sdn. Bhd.

No.8, Jalan Perbandaran, Kelana Jaya, 47301

Petaling Jaya, Selangor, Malaysia

Tel: +60-3-78030900

SINGAPORE

Yamaha Music (Asia) Private Limited

Block 202 Hougang Street 21, #02-00,

Singapore 530202, Singapore

Tel: +65-6740-9200

TAIWAN

Yamaha Music & Electronics Taiwan Co.,Ltd.

2F., No.1, Yuandong Rd., Banqiao Dist.,

New Taipei City 22063, Taiwan (R.O.C.)

Tel: +886-2-7741-8888

THAILAND

Siam Music Yamaha Co., Ltd.

3, 4, 15, 16th Fl., Siam Motors Building,

891/1 Rama 1 Road, Wangmai,

Pathumwan, Bangkok 10330, Thailand

Tel: +66-2215-2622

VIETNAM

Yamaha Music Vietnam Company Limited

15th Floor, Nam A Bank Tower, 201-203 Cach Mang

Thang Tam St., Ward 4, Dist.3,

Ho Chi Minh City, Vietnam

Tel: +84-8-3818-1122

OTHER ASIAN COUNTRIES

http://asia.yamaha.com/

AUSTRALIA

Yamaha Music Australia Pty. Ltd.

Level 1, 80 Market Street, South Melbourne,

VIC 3205, Australia

Tel: +61-3-9693-5111

COUNTRIES AND TRUST

TERRITORIES IN PACIFIC OCEAN

http://asia.yamaha.com/

NORTH AMERICA

CENTRAL & SOUTH AMERICA

EUROPE

AFRICA

MIDDLE EAST

ASIA

OCEANIA

PA53

Dimensions

324

279

314

300

282

342

644

608

VXC8SB

VXC8SW

Unit: mm

AB-C8S

O-Ring

Rail

(weee_eu_en_02)

(weee_eu_de_02)

(weee_eu_fr_02)

(weee_eu_es_02)

(weee_eu_pt_02a)

(weee_eu_it_02)

Information for users on collection and disposal of old

equipment:

English

This symbol on the products, packaging, and/or accompanying docu-

ments means that used electrical and electronic products should not be

mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take

them to applicable collection points, in accordance with your national leg-

islation.

By disposing of these products correctly, you will help to save valuable

resources and prevent any potential negative effects on human health and

the environment which could otherwise arise from inappropriate waste

handling.

For more information about collection and recycling of old products, please contact your

local municipality, your waste disposal service or the point of sale where you purchased

the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or

supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please

contact your local authorities or dealer and ask for the correct method of disposal.

Verbraucherinformation zur Sammlung und

Entsorgung alter Elektrogeräte

Deutsch

Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder

beiliegenden Unterlagen, so sollten benutzte elektrische Geräte nicht mit

dem normalen Haushaltsabfall entsorgt werden.

In Übereinstimmung mit Ihren nationalen Bestimmungen bringen Sie alte

Geräte bitte zur fachgerechten Entsorgung, Wiederaufbereitung und Wie-

derverwendung zu den entsprechenden Sammelstellen.

Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wert-

volle Ressourcen zu schützen, und verhindern mögliche negative Auswir-

kungen auf die menschliche Gesundheit und die Umwelt, die andernfalls

durch unsachgerechte Müllentsorgung auftreten könnten.

Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte kon-

taktieren Sie bitte Ihre örtliche Stadt- oder Gemeindeverwaltung, Ihren Abfallentsorgungs-

dienst oder die Verkaufsstelle der Artikel.

Information für geschäftliche Anwender in der Europäischen Union:

Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder

Zulieferer für weitere Informationen.

Entsorgungsinformation für Länder außerhalb der Europäischen Union:

Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausran-

gieren möchten, kontaktieren Sie bitte Ihre örtlichen Behörden oder Ihren Händler und fra-

gen Sie nach der sachgerechten Entsorgungsmethode.

Informations concernant la collecte et le traitement des

déchets d’équipements électriques et électroniques

Français

Le symbole sur les produits, l'emballage et/ou les documents joints signi-

fie que les produits électriques ou électroniques usagés ne doivent pas

être mélangés avec les déchets domestiques habituels.

Pour un traitement, une récupération et un recyclage appropriés des déc-

hets d’équipements électriques et électroniques, veuillez les déposer aux

points de collecte prévus à cet effet, conformément à la réglementation

nationale.

En vous débarrassant correctement des déchets d’équipements électri-

ques et électroniques, vous contribuerez à la sauvegarde de précieuses

ressources et à la prévention de potentiels effets négatifs sur la santé

humaine qui pourraient advenir lors d'un traitement inapproprié des déc-

hets.

Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipem-

ents électriques et électroniques, veuillez contacter votre municipalité, votre service de trai-

tement des déchets ou le point de vente où vous avez acheté les produits.

Pour les professionnels dans l'Union européenne :

Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniq-

ues, veuillez contacter votre vendeur ou fournisseur pour plus d'informations.

Informations sur la mise au rebut dans d'autres pays en dehors de l'Union euro-

péenne :

Ce symbole est seulement valable dans l'Union européenne. Si vous souhaitez vous déb-

arrasser de déchets d’équipements électriques et électroniques, veuillez contacter les

autorités locales ou votre fournisseur et demander la méthode de traitement appropriée.

Información para usuarios sobre la recogida y

eliminación de los equipos antiguos

Español

Este símbolo en los productos, embalajes y documentos anexos significa

que los productos eléctricos y electrónicos no deben mezclarse con los

desperdicios domésticos normales.

Para el tratamiento, recuperación y reciclaje apropiados de los productos

antiguos, llévelos a puntos de reciclaje correspondientes, de acuerdo con

la legislación nacional.

Al deshacerse de estos productos de forma correcta, ayudará a ahorrar

recursos valiosos y a impedir los posibles efectos desfavorables en la

salud humana y en el entorno que de otro modo se producirían si se tra-

taran los desperdicios de modo inapropiado.

Para obtener más información acerca de la recogida y el reciclaje de los productos anti-

guos, póngase en contacto con las autoridades locales, con el servicio de eliminación de

basuras o con el punto de venta donde adquirió los artículos.

Para los usuarios empresariales de la Unión Europea:

Si desea desechar equipos eléctricos y electrónicos, póngase en contacto con su vende-

dor o proveedor para obtener más información.

Información sobre la eliminación en otros países fuera de la Unión Europea:

Este símbolo solo es válido en la Unión Europea. Si desea desechar estos artículos, pón-

gase en contacto con las autoridades locales o con el vendedor y pregúnteles el método

correcto.

Informações para os utilizadores relativas à recolha e

eliminação de equipamentos usados

Português

Este símbolo, presente em produtos, embalagens e/ou incluído na docu-

mentação associada, indica que os produtos elétricos e eletrónicos usa-

dos não devem ser eliminados juntamente com os resíduos domésticos

em geral.

O procedimento correto consiste no tratamento, recuperação e recicla-

gem de produtos usados, pelo que deve proceder à respetiva entrega nos

pontos de recolha adequados, em conformidade com a legislação nacio-

nal em vigor.

A eliminação destes produtos de forma adequada permite poupar recur-

sos valiosos e evitar potenciais efeitos prejudiciais para a saúde pública e

para o ambiente, associados ao processamento incorreto dos resíduos.

Para mais informações relativas à recolha e reciclagem de produtos usados, contacte as

autoridades locais, o serviço de eliminação de resíduos ou o ponto de venda onde foram

adquiridos os itens relevantes.

Informações para utilizadores empresariais na União Europeia:

Para proceder à eliminação de equipamento elétrico e eletrónico, contacte o seu revende-

dor ou fornecedor para obter informações adicionais.

Informações relativas à eliminação em países não pertencentes à União Europeia:

Este símbolo é válido exclusivamente na União Europeia. Caso pretenda eliminar este tipo

de itens, contacte as autoridades locais ou o seu revendedor e informe-se acerca do pro-

cedimento correto para proceder à respetiva eliminação.

Informazioni per gli utenti sulla raccolta e lo

smaltimento di vecchia attrezzatura

Italiano

Questi simboli sui prodotti, sull'imballaggio e/o sui documenti che li

accompagnano, indicano che i prodotti elettrici ed elettronici non devono

essere mischiati con i rifiuti generici.

Per il trattamento, il recupero e il riciclaggio appropriato di vecchi prodotti,

si prega di portarli ai punti di raccolta designati, in accordo con la legisla-

zione locale.

Smaltendo correttamente questi prodotti si potranno recuperare risorse

preziose, oltre a prevenire potenziali effetti negativi sulla salute e

l'ambiente che potrebbero sorgere a causa del trattamento improprio dei

rifiuti.

Per ulteriori informazioni sulla raccolta e il riciclaggio di vecchi prodotti, si prega di contat-

tare l’amministrazione comunale locale, il servizio di smaltimento dei rifiuti o il punto ven-

dita dove sono stati acquistati gli articoli.

Per utenti imprenditori dell'Unione europea:

Se si desidera scartare attrezzatura elettrica ed elettronica, si prega di contattare il proprio

rivenditore o il proprio fornitore per ulteriori informazioni.

Informazioni sullo smaltimento negli altri Paesi al di fuori dell'Unione europea:

Questi simboli sono validi solamente nell'Unione Europea; se si desidera scartare questi

articoli, si prega di contattare le autorità locali o il rivenditore e richiedere informazioni sulla

corretta modalità di smaltimento.

Manual Development Group

Published 07/2019

POEI-A0

Yamaha Pro Audio global website

http://www.yamahaproaudio.com/

Yamaha Downloads

https://download.yamaha.com/

Yamaha VXC8SB Manualul proprietarului

Marca: Yamaha

Model: VXC8SB

Tip: Manualul proprietarului

Acest manual este potrivit și pentru

Descărcați PDF

raport

în alte limbi

français: Yamaha VXC8SB Le manuel du propriétaire
čeština: Yamaha VXC8SB Návod k obsluze
English: Yamaha VXC8SB Owner's manual
polski: Yamaha VXC8SB Instrukcja obsługi
Deutsch: Yamaha VXC8SB Bedienungsanleitung
日本語: Yamaha VXC8SB 取扱説明書
italiano: Yamaha VXC8SB Manuale del proprietario
español: Yamaha VXC8SB El manual del propietario
dansk: Yamaha VXC8SB Brugervejledning
português: Yamaha VXC8SB Manual do proprietário
Nederlands: Yamaha VXC8SB de handleiding

Yamaha VXC8SB Manualul proprietarului

Acest manual este potrivit și pentru

Yamaha VXC8SB Manualul proprietarului

în alte limbi

Lucrări conexe