Silk'n 7 Manual de utilizare

Silkn 7

H3500

USER MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

MANUAL DO UTILIZADOR

BRUKSANVISNING

ANVÄNDARHANDBOK

BEDIENUNGSANLEITUNG

KULLANIM KILAVUZU

MANUALE PER L’UTENTE

NL

ES

PT

GR

FI

SV

DA

RU

EN

DE

FR

NL

ES

PT

TR

NO

IT

SV

GEBRUIKSAANWIJZING

BRUGERMANUAL

DE

DA

NO

CS

NÁVOD K POUŽITÍ

SV

PL

INSTRUKCJA OBSŁUGI

SV

LT

NAUDOTOJO GIDAS

PT

HU

HASZNÁLATI ÚTMUTATÓ

GR

RO

MANUAL DE UTILIZARE

(i)

Silk n

532 4

6

13

10

1

11

12

9

7

8

Skin colour

energy energy energy energy energy

Hair colour

energy

1 -21 -21 -31 -41 -51 -5

Silkn 7

Table of contents

1. Warnings .......................................................................................2

2. Contraindications .........................................................................3

3. Safety features ..............................................................................5

4. Get to know your device ..............................................................6

5. Treatment ......................................................................................10

6. Get started! ...................................................................................12

7. Cleaning, maintenance & storage ...............................................14

8. Connecting with the device .........................................................14

9. Troubleshooting ...........................................................................15

10. Customer service ..........................................................................16

11. Warranty ........................................................................................16

12. Disposal .........................................................................................16

13. Specifications ................................................................................17

14. Signs & symbols ............................................................................17

15. Legal notice ...................................................................................18

1

EN

1. Warnings

The user manual is based on the standards and rules in force in the

European Union. When abroad, you must also observe country-specic

guidelines and laws.

Before rst use, please read this user manual in full, and keep it for future

use. We recommend you refamiliarise yourself with the instructions

before each treatment.

UAlways keep the device or any of its parts dry. Ensure that your hands

are dry before connecting the adapter to the electricity supply.

UDo not use the device while bathing or taking a shower.

UIf the device has come into contact with water, disconnect it

immediately from the electricity supply before touching it.

UNever use the adapter if it has a damaged cable or plug, or isn’t

working properly, or has been submerged in water. If that happens,

unplug the adapter immediately before touching it. Failure to

unplug the adapter may result in an electric shock!

UNever use the device if the yellow window of the treatment surface

is cracked or broken.

UDo not use this appliance near bathtubs, showers, basins or other

vessels containing water.

UDo not operate the device in environments where there is a risk of

explosion. Keep the device and all its parts away from open ames

and hot surfaces.

UNever leave the device unattended when connected to the

electricity supply. Keep the adapter accessible at all times, so it can

be removed from the electricity supply easily in case of emergency.

UAlways switch the device o and disconnect it from the electricity

supply when you are not using the device, when you intend to

clean it, or in the event of a fault.

UThe appliance is only to be used with the power supply unit

provided with the device.

UNever pull the adapter out of the socket by the cable. Always remove

it by taking hold of the adapter.

2

EN

UDo not kink the adapter cable or lay it over sharp edges. Place it in

such a way that it does not pose a tripping hazard.

UDo not operate the device in environments where there is a risk

of explosion. The device is not suitable for use in the presence of

ammable anaesthetic mixture with air, oxygen or nitrous oxide.

Keep the device and all its parts away from open ames and hot

surfaces.

UPossible hazardous optical radiation is emitted from this device. Do

not look at the operating lamp. Eye injury may result.

UChanges or modications to this device not expressly approved by

the party responsible for compliance could void the user’s authority

to operate the equipment.

UDo not use if the parts or accessories are not supplied by the

manufacturer as dened in this manual, or if the device is damaged

in any way, does not appear to be working properly, or if you see

or smell smoke. In such cases, stop using the device and contact

Customer Service.

UOnly authorized personnel are permitted to perform repairs. Do

not attempt to modify, open or repair the device. You may expose

yourself to dangerous electrical components and may cause serious

harm to yourself. It will also void the warranty.

UChildren must not play with the device or any of its parts. They may

injure themselves or swallow small parts and choke.

UChildren should be supervised to ensure that they do not play with

the device.

UDo not dispose with household waste! The law requires that you

dispose of this electrical device (including all accessories and parts)

at a designated recycling collection point for electrical devices. For

details see section 12. Disposal.

2. Contraindications

UThe device is not designed for everyone. Hair removal by intense pulsed light sources can

cause increased hair growth in some individuals, although it is extremely rare (less than

1% of the population). Potential areas for women are the face and neck, and for men, the

back, shoulders and upper arms, although it could also aect other areas. The highest risk

groups are people from the Mediterranean, Middle East and South Asia.

UThe device is not suitable for use on children or animals.

3

EN

CDo not use the device if you:

Uare pregnant or nursing.

Uhave a history of keloidal scar formation.

Uhave suered or suer from epilepsy.

UHave a disease related to photosensitivity, such as porphyria, polymorphic light eruption,

solar urticaria, lupus, etc.

Uhave a history of skin cancer or areas of potential skin malignancies.

Uhave received radiation therapy or chemotherapy treatments within the past 3 months.

Uhave received drugs from your physician for a skin condition within the past 6 months.

Uhave any other condition which in your physician’s opinion would make it unsafe for you

to use the device.

Ucannot sense heat properly because of an illness, or other health related issue.

CDo not use on these parts of the body:

UOn tanned skin. Refer to section 4.9 How to treat if you have been in the sun.

UAround or near the eyes. Use below the cheekbones.

UOn tattoos or permanent makeup, dark brown or black spots, (such as large freckles, moles,

or warts), nipples, genitals, around the anus, or lips.

UAreas with injected llers or toxins.

UA part of the body that has a history of herpes outbreaks.

USkin that has active eczema, psoriasis, lesions, open wounds or infections (cold sores),

abnormal skin conditions caused by systemic or metabolic diseases (diabetes for example).

UAreas that are prone to rosacea.

UOn varicose veins.

UAreas that are painful.

UAreas where you may want hair to grow later. The results are long-lasting.

CAdditional warnings

USelect the energy setting carefully. When the energy intensity is increased, hair removal

improves, but the risk of side eects and complications increases.

UFollow the hair and skin colour chart when selecting energy levels to avoid the risk of

burns, blisters or changes in skin colour (see the chart at the front of the manual).

UAlways do a spot test before you treat a specic part of your body.

UDo not treat the same area of skin more than once per hair removal session.

UAvoid overlapping pulses or gaps when you treat an area.

UUse a lower energy level if you experience mild discomfort.

4

EN

UDo not expose treated areas to the sun, and do not use energy levels 2-5 on tanned skin or

after recent sun exposure (including articial tanning machines). Refer to section 4.9 How

to treat if you have been in the sun.

UStop use immediately if you see full redness of the skin, blistering or burns.

UStop use immediately if you have any pain.

UStop use immediately if the skin or the device becomes too hot.

3. Safety features

With Silk'n device safety comes rst. Enhanced Home Pulsed Light™ (eHPL) technology provides

superior safety with lower energy levels.

eHPL™ achieves long term hair removal results at a fraction of the energy level used in other light-

based hair removal equipment. The technology combines 2 energy sources: Galvanic energy and

Optical energy. The Galvanic energy enables better penetration of the Optical energy to the hair

shaft by temporarily widening the skin pores.

The hair shaft absorbs the light, deactivates the hair follicle and hair growth is disabled.

3.1 Skin protection

Light-based hair removal is not suitable for tanned skin. The device comes with a built-in skin

colour sensor (#1) that is designed to measure the complexion of the applied surface and enables

energy levels according to skin complexion.

Furthermore, the treatment surface (#10), through which pulses of light are delivered, is recessed

inside the device. This enables the device to protect your skin by avoiding direct contact between

the treatment surface (#10), and the skin.

3.2 Eye protection

The device has a built-in safety feature for eye protection. It has been designed so that a light

pulse cannot be emitted when the treatment surface (#10) is facing open air. The safety feature

enables treatment only when the treatment surface (#10) is in contact with the skin.

3.3 Exposure to the sun

USun exposure includes constant unprotected exposure to direct sunlight for over 15

minutes, or constant unprotected exposure to diuse sunlight for over 1 hour.

UDo not use on tanned skin after recent sun exposure, including tanning machines. Using

the device on skin that has been recently exposed to sunlight can result in adverse eects

such as burns, blisters, and skin colour changes (hyper- or hypopigmentation).

UAvoid further exposure to the sun for 4 weeks before and 2 weeks after your treatment.

This is because higher quantities of melanin expose the skin to greater risk when using any

method of light-based hair removal. This applies to all skin types, even those that don’t

seem to tan quickly.

5

EN

4. Get to know your device

The device is a powerful electrical device and should be used with special attention to safety.

Before use, it is important that you read and understand the instructions on how to

use the device including after-use procedures, and follow them strictly. We recommend

you familiarise yourself with the instructions in this manual before each treatment session.

4.1 Package contents

UHair removal device

UAdapter with cable

UExtension cable (Europe / United Kingdom)

UCleaning cloth

UBeauty case

UUser manual

4.2 Device features

The device is a home-use device using eHPL™ technology for the removal of unwanted hair. The

device has a treatment surface and a pulse button. It also has a pair of electrodes, base and touch,

for creating and utilizing a Galvanic treatment circulation. Refer to the diagram at the front of the

manual to see the location of each feature.

ySkin colour sensor (#1)

yOn indicator light (green) /communication indicator light (blue) (#2)

yControl button (#3)

yAutomatic energy level setting indicator light (green) (#4)

yEnergy level indicator lights (1-5) (#5)

yReady light (green) /skin tone warning indicator light (orange) (#6)

yPulse button (#7)

yBase electrode (#8)

yAdapter socket (#9)

yTreatment surface window (#10)

yContact electrode (#11)

yGalvanic energy electrode (#12)

yReplaceable cartridge (#13)

4.3 Intended use

The device is intended for removal of unwanted hair. The device is also intended to eect long

term or permanent hair reduction. Permanent hair reduction is dened as a long-term stable

reduction in the number of hairs regrowing after a treatment regime. You may use the device to

remove unwanted body hair. Ideal body areas include the underarms, bikini line, arms, legs, face

(below the cheekbones), back, shoulders and chest.

6

EN

The device is not a medical appliance. It is intended exclusively for cosmetic treatments. The

device is only intended for private use and is not suitable for commercial or therapeutic use.

This device is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

Do not use for any purpose other than as described in this manual.

4.4 Device controls

Control Function / Mode

Control button - long press (#3) yA long press turns the device on or o. When on, the control

button (#3) is green.

yWhen the device is on, the energy level is in automatic mode

and all energy level indicator lights (#5) are o.

yWhen pairing with Bluetooth, the communication indicator

light (#2) is blue and blinks. When paired, the blue

light is constant.

Control button - short press (#3) yWhen the energy level is lower than 5, a short press increases

the level by 1 increment. The device sets itself to manual

mode and the automatic energy level setting indicator light

(green) (#4) is o.

yWhen you are at energy level 5, a short press moves the device

to automatic mode and all energy level indicator lights (#5)

are o. The automatic energy level setting indicator light (#4)

will be constant green.

yIf you are in automatic mode, a short press moves the device

to manual mode and increments the level by 1 increment.

Pulse button (#7) Triggers a light pulse.

Base electrode (#8) Triggers a light pulse when pressed together with the pulse

button (#7).

Ready light (green) / skin tone

warning indicator light (orange)

(#6)

yGreen constant: When the device is turned on.

yLight o: The device is getting ready for the next pulse.

yGreen blinks: The device is in contact with the treatment

area.

yOrange blinks: The device cannot detect the skin colour.

Energy level indicator lights

(green) (#5) yGreen constant: The energy is active. The number of lights

on corresponds to the energy level selected.

Automatic energy level setting

indicator light (green) (#4) yGreen constant: The energy level is set automatically

according to the skin tone detected.

On indicator light (green) /

communication indicator light

(blue) (#2)

yBlue blinking: The device is on and is establishing a

Bluetooth connection.

yBlue constant: The device is paired with the App.

7

EN

4.5 Device sensors

The device has sensors for touch and colour.

UTouch: The device will only emit pulses when at least 3 contact electrodes (#11) are in

rm contact with your skin.

UColour: Light-based hair removal on darker skin tones may result in adverse eects such

as burns, blisters, and skin colour changes (hyper- or hypopigmentation). The device has

a skin colour sensor (#1) that detects the colour of your skin automatically. The skin colour

sensor (#1) checks your skin colour at the start of, and occasionally during, each treatment.

GIf the device detects that your skin tone is too dark for safe use, the ready light/skin tone

warning indicator light (#6) will blink orange.

4.6 Energy levels

UThe energy level determines the intensity of the light pulse delivered to your skin. As the

energy level increases, so do the results, as well as the risk of possible side eects and

complications (see section 5.2 Possible side eects).

UThe device has 5 levels of energy from 1 (the lowest) to 5 (the highest), represented by 5

energy level indicator lights (#5). To change levels, short press the control button (#3).

UTo set manually the right energy level for your treatment area (see section 6.4 Do a spot

test).

UThe device at automatic setting sets the energy level automatically according to the skin

tone measured by the device.

4.7 Automatic and manual modes

The device has two modes: automatic and manual.

Automatic: When the pulse button (#7) is pressed, the device releases a pulse using the

maximum energy level that is suitable for your skin type. There is no need to select the right

energy level yourself; this will happen automatically. For example, if you have skin type 1, the

pulse emitted will be at energy level 5 because that’s the highest energy level allowed for your

skin type. The darker the skin tone, the lower the energy level. You can see the dierent skin types

in the table in section 5.1 Treatment plan.

Manual: You set the energy level manually. Each short press increases the energy level by 1

increment. However, if you set the energy level higher than the level suited to your skin type,

the device will not release a pulse, and the ready light / skin tone warning indicator light (#6) will

blink orange.

4.8 Pulsing and gliding

Whether you decide to pulse or glide:

UAvoid gaps or overlaps as you use the device. Overlaps increase the likelihood of adverse

aects.

CDo not treat the same area of skin more than once per treatment session.

A

8

EN

Pulsing is the best technique for treating specic spots or small areas.

UPress the treatment surface (#10) against your skin. Work in rows (either across or down

as shown in the image). Start at one end of each row and progress to the other end. The

treatment surface (#10) creates temporary pressure marks on the treated area so you can

see areas you have treated.

UAfter each pulse, move the treatment surface (#10) to the next spot. Keep doing this

pulsing action for the area you are treating.

Gliding is the best technique for treating larger parts of the body.

UPress the treatment surface (#10) rmly against your skin and slowly glide over your skin

(either across or down as shown in the image). Make sure that the treatment surface (#10)

is always touching your skin.

UAt lower energy levels, the device takes only 0.5 - 2.6 seconds to recharge between pulses.

This generates a nonstop sequence of ashes.

4.9 How to treat if you have been in the sun

UThe lowest energy level (level 1) is designed for safe use even after sun exposure.

UIf you use energy levels 2-5, avoid further exposure to the sun for 4 weeks before and 2

weeks after your treatment. This is because higher quantities of melanin expose the skin

to greater risk when using any method of light-based hair removal. This applies to all skin

types, even those that don’t seem to tan quickly.

UWe don’t advise it, but if you have to go out in the sun after a treatment, be sure to apply

sunscreen SPF30 or higher to the treated area. Do this for 2 weeks after a treatment.

4.10 Exposure of pulsed light to the eyes

Although you can use the device to treat facial hair, take extra care to avoid contact with the eyes,

and use only below the cheekbones.

GThe device will only emit repeated pulses when it is in rm contact with your skin, and you

keep moving it across your skin.

Pulsing

Gliding

Silk n

9

EN

4.11 What to expect with the device

During a device treatment session it is normal to experience and feel:

UA fan noise: The cooling fan makes a noise similar to that of a hair dryer.

UA popping sound with each pulse: When a pulse of eHPL™ light is activated, it is normal

to hear a subtle pop sound simultaneously with the ash of light.

UA sensation of warmth and tingling: During each Galvanic pulse sequence it is normal

to feel a mild sensation of warmth and tingling from the Galvanic and light energies.

USome mild red or pink colour: During and just after your treatment session it is not

uncommon to see some very mild, pink-like colour of the skin. This is usually most

noticeable around the hairs themselves.

CStop use immediately if you see full redness of the skin, blistering or burns.

5. Treatment

5.1 Treatment plan

A typical full hair growth cycle may take 18-24 months. During this time multiple device treatment

sessions may be required in order to achieve permanent hair removal.

The eciency of hair removal varies from person to person according to body area, hair colour

and how the device is used.

Typical treatment plan during a full hair growth cycle:

UTreatments 1-4: Plan two weeks apart.

UTreatments 5-7: Plan four weeks apart.

UTreatments 8+: Treat as needed, until desired results are achieved.

Ideal body areas include underarms, bikini area, arms, legs, back shoulders and chest (excluding

nipples). For the face, use below the cheekbones but not around or near the eyes or lips.

Skin Type1Body Hair2Light Fluence

[J/cm2]

Area of the Body Average Treatment Time % Hair

Reduction

I-6 Dark

blond

to brown

2.5-4 Lower or upper legs Session 10-12, approx.

four weeks apart.

60%

Arms 50%

Bikini Line 60%

Underarms 55%

I-6 Brown to

black

2.5-4 Lower or upper legs Session 8-10, approx. four

weeks apart.

70%

Arms 60%

Bikini Line 70%

Underarms 65%

10

EN

1 Individual response depends on hair type as well as biological factors that may aect hair growth patterns. Some

users may respond quicker or slower than the average number of treatments.

2 One cannot expect permanent hair removal in a single or even double treatment sessions. The duration of the

resting period for hair follicles also depends on the body area.

5.2 Possible side eects

When used according to the instructions, side eects and complications associated with the use

of the device are uncommon. However, every cosmetic procedure, including those designed for

home use, involves some degree of risk. Therefore, it is important that you understand and accept

the risks and complications that can occur with pulsed light hair removal systems designed for

home use.

There is a minor risk that stacking or overlapping of multiple pulses on the same skin spot may

have some adverse eects.

Minor skin discomfort

Home pulsed light hair removal is generally well-tolerated. However, some users feel mild

discomfort during use. This is best described as a mild stinging sensation on the treated skin

areas. The stinging sensation may last during or after treatment.

This means that you should use the device at a lower energy level, and if that doesn't help, you

should stop using the device.

Skin redness

Your skin may become red immediately after using the device or within 24 hours. Redness

generally clears up within 24 hours. See your doctor if redness does not go away within 2

to 3 days.

Make sure you use the energy level that is comfortable for you and suitable for your skin colour.

Increased sensitivity of the skin

The skin of the treated area is more sensitive so you may encounter dryness or aking of the skin.

Pigment changes

The device targets the hair shaft, in particular the pigmented cells in the hair follicle and the hair

follicle itself. Nevertheless there is a risk of temporary hyper-pigmentation (increased pigment or

brown discolouration) or hypo-pigmentation (whitening) to the surrounding skin. Risk of changes

in skin pigmentation is higher for people with darker skin tones or heavily tanned skin. Usually

discolouration or changes to skin pigment are temporary, and permanent hyper-pigmentation or

hypo-pigmentation are rare.

Excessive redness and swelling

In rare cases, treated skin may become very red and swollen. This is more common in sensitive

areas of the body. The redness and swelling should subside within 2 to 7 days and should be

treated with frequent applications of ice. Gentle cleansing is OK, but avoid exposure to the sun.

Blisters or burns; skin wounds

It is very unusual but blister, burns or wounds to the skin may occur following a treatment. These

can require a few weeks to heal, and in very rare cases, may leave a noticeable scar.

11

EN

Cool the aected area and apply anti-burn cream. Wait until the area has healed completely

before another treatment, and use a lower energy level.

GIf the skin does not return to normal within 3 days, consult your physician.

Infection or bruising

Infection of the skin is exceedingly rare but is still a possible risk following a skin burn or wound

caused by the device.

Very rarely, the device may cause blue-purple bruising that can last 5 to 10 days. As the bruising

fades, there may be a rust-brown discolouration of the skin (hyperpigmentation).

CStop use immediately if any of these side eects are more severe.

CSee your physician if the side eects do not go away within 2 to 3 days.

6. Get started!

6.1 Assemble the replaceable cartridge

1. For each body area, it is important to choose the correct replaceable cartridge.

2. To place the cartridge (#13), snap it onto the treatment surface window (#10). To remove

the cartridge, pull it o the treatment surface window.

Cartridge Size Treatment Area

Small Face, upper lip and sideburns, bikini line and underarms

Medium Bikini line, underarms

Large The body below the neckline

6.2 Connecting the device

1. Remove the device and other components from box.

2. Plug the adapter into the adapter socket (#9) and plug the adapter into the electricity

supply. All indicator lights (#2, #4, #5, #6) will turn on, and then go o.

6.3 Pre-treatment preparation

CRemove all jewellery on or near the treatment area before use.

1. Before treating an area, the skin should be shaved, clean, dry and free of any powders,

antiperspirants or deodorants. Do not wax, pluck or tweeze the hair out.

CNever use ammable liquids such as alcohol (including perfumes, sanitizers, or other

applications containing alcohol), or acetone to clean the skin before use.

CDo not use the device if the treatment surface (#10) is broken or missing.

12

EN

2. Be sure to cover up moles, warts or other marks on the skin that should not be treated. Use

a material that does not absorb the light such as a white cloth or white medical tape.

6.4 Do a spot test

It’s important to do a spot test on each part of the body you wish to treat. A spot test checks that

the skin colour is suitable for treatment, and that you know which energy level is comfortable for

the area you are treating. Both skin colour and energy level may vary depending on the target

treatment area.

1. Press the control button (#3) to turn on the device. The automatic energy level setting

indicator light (green) (#4) will go on.

2. Place the treatment surface (#10) on your skin and press the pulse button (#7) to deliver

one pulse. Make sure your hand touches the base electrode (#8) together with the pulse

button (#7). When the treatment surface (#10) is in full contact with the skin, the ready

light / skin tone warning indicator light (#6) will start blinking green slowly.

3. If you do not experience abnormal discomfort press the control button (#3) again. This will

increase the energy level by one increment.

4. Press the pulse button (#7) with your hand touching the base electrode (#8) to deliver

another pulse on a dierent spot at energy level 2. Continue testing at increased energy

levels. Use the energy levels indicated on the skin colour chart. When you nd the highest

energy level that is comfortable for that treatment area, you can start your treatment.

CUse a lower energy level if you experience discomfort.

You are now ready to perform a treatment.

6.5 Treatment steps

1. Press the control button (#3). The device will turn on, the automatic energy level setting

indicator light (#4) will be green, and a fan sound will start.

2. After pressing the control button (#3), the ready light /skin tone warning indicator light

(#6) will be green. The device is then ready to use at the lowest energy level. Always start at

energy level 1 for your rst treatment.

3. Set the energy level. Press the control button (#3) repeatedly to increase the energy level

until you have the level you want. The energy level indicator lights (#5) indicate the energy

level setting (see section 4.6 Energy levels). The number of energy level indicator lights (#5)

that are on, indicates the energy level selected.

4. Decide if you wish to treat the area by Pulsing or Gliding (see section 4.8 Pulsing and

gliding).

5. Apply the treatment surface (#10) to the skin. Press the pulse button (#7). The device will

rst determine the colour of your skin automatically. If the skin colour is light enough for

safe application, the device will activate the Galvanic energy. You will feel a mild sensation

of warmth and tingling, and you may hear a popping sound. This is completely normal. The

Galvanic energy works to enlarge your pores for a better application of the treatment.

GIf your hand does not touch the base electrode (#8) no Galvanic energy will be emitted.

13

EN

6. Directly afterwards, the device will ash a pulse of light onto your skin, and the ready light

/ skin tone warning indicator light (#6) will turn o. You will see a bright ash of light and

simultaneously hear a popping sound, which is a normal noise for the device. You will feel

a mild sensation of warmth and tingling. The device will immediately recharge for the next

pulse.

7. If you are Pulsing, repeat the process. If you are Gliding, simply continue. Continue to

pulse or glide until you have treated the area fully.

GAvoid gaps or overlaps.

GThe device will only emit repeated pulses when it is in rm contact with your skin, and you

keep moving it across your skin.

CStop use immediately, if your skin blisters or burns, if you feel very uncomfortable, or if the

device gets too hot.

6.6 After treatment

When you have nished your treatment session:

1. Long press the control button (#3) to switch o the device. Remember the last energy level

setting you used, because it will not be restored when you turn the device on again.

2. Disconnect the adapter from the electricity supply, then clean the device and store safely

(see section 7. Cleaning, maintenance & storage.

3. After your treatment session we recommend you apply a body lotion to the treated area to

help your skin recover from the treatment faster.

7. Cleaning, maintenance & storage

UDisconnect the device from the electricity supply.

UTo clean the device including the treatment surface (#10), wipe with a clean, dry cloth and

70% alcohol. Never use acetone or other abrasive uids, because they will damage your

device.

UUse a wipe to dry the device.

UAfter cleaning, we recommend you store the device in its original box.

CNever immerse the device or any of its parts in water.

8. Connecting with the device

The free Silk'n Hair Removal application supports your every step with Silk'n hair removal devices.

The app creates your personalized treatment plan, helps you make the safest and most informed

choices, and makes sure you follow through the entire course of treatment for best results.

As a device owner you can also enjoy Bluetooth connectivity. Just download the application and

follow the registration process and Bluetooth pairing steps.

14

EN

For a free download of the Silk'n hair removal app, scan:

9. Troubleshooting

Only authorized personnel are permitted to perform repairs. Do not attempt to modify, open or

repair the device. You may expose yourself to dangerous electrical components and may cause

serious harm to yourself. It will also void the warranty.

Problem Checks

My device does not start. yCheck that the adapter is properly connected to the

device and that it is plugged into the electricity supply.

There is no Galvanic pulse when I press

the pulse button (#7). yCheck that your hand is touching the base electrode

(#8) when you press the pulse button (#7).

yThe Galvanic energy is only active when the Galvanic

circuit is closed. This is achieved by pressing the pulse

button (#7) and the base electrode (#8) at the same

time.

There is no light pulse when I press the

pulse button (#7). Check that:

ythe ready light / skin tone warning light (#6) is green

and blinks slowly.

ythe treatment surface (#10) is evenly and rmly pressed

against the skin. The pulse button only activates pulses

when the device is pressed rmly against the skin.

ythe ready light / skin tone warning indicator light (#6) is

not orange. If it is and blinks rapidly, this is an indication

that your skin is too dark for safe use. Try using the

device on a dierent area.

There is no light pulse when the device

touches my skin. Check that:

ythe device is connected and that the ready light/skin

tone warning indicator light (#6) is green and blinking.

ythe treatment surface (#10) is evenly and rmly pressed

against the skin.

yIt may also be that your skin colour is too dark.

The ready light /skin tone warning

indicator light (#6) blinks orange. yThe skin colour is too dark.

One or more lights are on constantly. yThe device has malfunctioned.

The device has stopped working and is

in standby mode. yPress the control button (#3) again to start the device.

15

EN

10. Customer service

For more information about the products of Silk’n visit your regional Silk’n website:

www.silkn.eu. If the device is damaged, defective, in need of repair or you need our assistance, please

contact your nearest Silk’n service centre. This manual is also available as a PDF download from:

www.silkn.eu.

ervice number: 0906-2130009 Email: [email protected]

Country Service number Email

Belgium 0800-29316 ser[email protected]

France 0891-655557 serviceconsommateurfr@silkn.eu

Germany 089 51 23 44 23 kundenser[email protected]

Italy +31(0)180-330 550 servizioclientiit@silkn.eu

Netherlands 0900-2502217 klantenservicenl@silkn.eu

Spain 900 823 302 ser[email protected]

UK 0906-2130009 customercareuk@silkn.eu

Other countries +31 (0)180-330 550 [email protected]

11. Warranty

This product is covered by a 2-year warranty according to European regulations and law. The

extent of the warranty on this product is limited to technical defects caused by faulty production

processes. In the event you want to claim warranty please be sure to contact our customer service

for instructions. They may be able to solve your problem without needing to return the product

to the store or our service centre. Our customer service is always pleased to help you!

GThe manufacturer accepts no liability for damage or injuries caused by improper or incorrect

use.

12. Disposal

ISort the packaging before you dispose of it. Dispose of paperboard and cardboard with

the recycled paper service and wrappings with the appropriate collection service.

N(Applicable in the European Union and other European countries with separate collection

systems of recyclable materials). Old appliances may not be disposed of in household

waste! Should the product no longer be capable of being used at some point in time,

dispose of it in accordance with the regulations in force in your city or county.

This ensures that old appliances are recycled in a professional manner and also rules

out negative consequences for the environment. For this reason, electrical equipment is

marked with the symbol shown here.

* Products labelled with Cd = cadmium, Hg = mercury, Pb = lead

16

EN

13. Specifications

Model H3500

Galvanic 70-400 Microampere (µA)

Spot size 1.70cm x 3.0cm [5.10cm²] 0.81cm x 3.0cm [2.43cm²]

0.81cm x 1.2cm [0.97cm²]

Technology Enhanced Home Pulsed Light™

Max energy level Max 5J/cm²

Wavelength 520-1200nm

Pulse light duration 500-800µs

Mode of operation Continuous

Repetition rate 2.0 [Hz] maximum

System weight 520 (gr)

Transport & storage between uses and

storage condition Temperature: - 40° to +70°C

Relative humidity: 10% - 90%rH

Atmospheric pressure: 500 - 1060hPa

Operating condition Temperature: 10° - 35°C

Relative humidity: 30% - 75%rH

Atmospheric pressure: 700 - 1060hPa

Time from minimum storage temperature

between uses to minimum operating

temperature with ambient temperature of

20°C

30 minutes

Time from maximum storage temperature

between uses to maximum operating

temperature with ambient temperature of

20°C

30 minutes

Protection against

electric shock Class II equipment type

Adapter KSA-60B-200300D5

Input: 100-240V; 50-60Hz; 1.8A

Output: 20Vdc; 3A; 60W

RF Connectivity

Operating frequency:

Transmitter power:

2,402 MHz ~ 2,480MHz

Below 0.5 mW

Simplied Declaration of Conformity: In accordance with article 10(9) of the EU declaration

of conformity, the radio equipment type Bluetooth LE is in compliance with Directive 2014/53/EU.

14. Signs & symbols

Important information about using or maintaining the device

17

EN

A statement or event that indicates a possible or

impending danger, problem, or other unpleasant

situation when using the device.

Products marked with this symbol full the requirements of the EU directives.

Do not dispose with household waste! Dispose in accordance with your country's

laws and help protect the environment. In accordance with the WEEE directive.

Read the operator manual.

Separate supply unit.

Do not use in the bathroom.

The device is protected against the ingress of objects larger than 2.5mm diameter,

such as ngers, to protect against electric shock.

Class II. Equipment in which protection against electric shock is provided by the

use of double or reinforced insulation.

15. Legal notice

Silkn Beauty Ltd. reserves the right to make changes to its products or specications to improve

performance, reliability, or manufacturability. Information furnished by Silkn Beauty Ltd. Is believed

to be accurate and reliable at the time of publication. However, Silkn Beauty Ltd. assumes no

responsibility for its use. No license is granted by its implication or otherwise under any patent or

patent rights of Silkn Beauty Ltd. No part of this document may be reproduced or transmitted in

any form or by any means, electronic or mechanical, for any purpose, without the express written

permission of Silkn Beauty Ltd. Data is subject to change without notication.

Silkn Beauty Ltd. has patents and pending patent applications, trademarks, copyrights, or

other intellectual property rights covering subject matter in this document. The furnishing of

this document does not give you any license to these patents, trademarks, copyrights, or other

intellectual property rights except as expressly provided in any written agreement from Silkn

Beauty Ltd. Specications are subject to change without notice. Silk'n and the Silk'n logo are

registered trademarks of Silkn Beauty Ltd, Alon Ha-Tavor 15, Caesarea, 3079516, Israel, www.silkn.eu

info@silkn.eu.

IP30

18

EN

Pagina se încarcă ...

Silk'n 7 Manual de utilizare

Silk'n 7 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente