LG NB3630A Manualul proprietarului

Marca: LG

Model: NB3630A

Categorie: Playere media digitale

Tip: Manualul proprietarului

Acest manual este potrivit și pentru

S33A1-D

OWNER’S MANUAL

300 W SOUND BAR

Please read this manual carefully before operating your set and retain it

for future reference.

NB3630A (NB3630A, S33A1-D)

ENGLISH

NB3630A-NB_DHKGLLK_ENG.indd 1 2013-10-30  11:06:41

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with

arrowhead symbol within an

equilateral triangle is intended to

alert the user to the presence of

uninsulated dangerous voltage

within the product’s enclosure

that may be of sucient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, shall be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

center. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To

disconnect power from the mains, pull out the

mains cord plug. When installing the product,

ensure that the plug is easily accessible.

NB3630A-NB_DHKGLLK_ENG.indd 2 2013-10-30  11:06:44

Getting Started 3

Getting Started

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery from the

equipment: Remove the old battery or battery

pack, follow the steps in reverse order than

the assembly. To prevent contamination of the

environment and bring on possible threat to

human and animal health, the old battery or

the battery put it in the appropriate container

at designated collection points. Do not dispose

of batteries or battery together with other

waste. It is recommended that you use local,

free reimbursement systems batteries and

accumulators. The battery should not be exposed

to excessive heat such as sunshine, re or the like.

Europe Notice

LG Electronics hereby declares that this/these

product(s) is/are in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,

2009/125/EC and 2011/65/EU.

Contact oce for compliance of this product :

LG Electronics Inc.

EU Representative, Krijgsman 1,

1186 DM Amstelveen, The Netherlands

Please note that this is NOT a Customer Service

contact point. For Customer Service Information,

see Warranty Card or contact the dealer that you

purchased this product.

Indoor Use Only

RF Radiation Exposure Statement

This equipment should be installed and operated

with minimum distance 20 cm between the

radiator and your body.

IMPORTANT SAFETY NOTICE

The cord grip for the plug tted to this product

is built into the existing power cord as supplied.

If, for any reason you need to shorten the cord.

DO NOT RE-USE THE PLUG

A new plug must be used to ensure your

continued safety by securing the plug to the

power cord in accordance with Plug & Socket

Regulations 1994.

NB3630A-NB_DHKGLLK_ENG.indd 3 2013-10-30  11:06:45

Please click HERE for DoC.

Table of Contents4

Table of Contents

1 Getting Started

2 Safety Information

6 Introduction

6 – About the “7” symbol display

6 Accessories

7 Front Panel

7 Rear Panel

8 Remote Control

9 Mounting the main unit on a wall

2 Connecting

11 Speaker Connection

11 – Pairing wireless subwoofer

12 Connecting to Your TV

12 – HDMI Connection

13 – What is SIMPLINK?

13 – ARC (Audio Return Channel) function

14 – Resolution Setting

15 – Optical digital audio connection

15 Connections with external device

15 – OPTICAL IN connection

3 System Setting

16 Initial Setup

16 Settings

16 – Adjust the setup settings

17 – [DISPLAY] menu

18 – [LANGUAGE] menu

19 – [AUDIO] menu

20 – [OTHERS] menu

21 Sound Effect

4 Operating

22 Home Menu Display

22 – Using [HOME] menu

22 – Using the Smart Share

23 Playing the Linked Devices

23 – Playing a USB device

24 General Playback

24 – Basic operations for video and audio

content

24 – Basic operations for photo content

24 – Resume playback

25 On-Screen Display

25 – To control video playback

26 – To control photo view

27 Advanced Playback

27 – Repeat playback

27 – Repeating a specific portion

27 – Playing from selected time

28 – Selecting a subtitle language

28 – Hearing a different audio

28 – Changing the TV Aspect Ratio

29 – Changing Subtitle Code Page

29 – Changing the Picture Mode

29 – Viewing content information

30 – Changing content list view

30 – Selecting a subtitle file

31 – Listening to music during slide show

31 – Setting the [3D] option

32 Using Bluetooth® technology

32 – Listening to music stored on the

Bluetooth devices

NB3630A-NB_DHKGLLK_ENG.indd 4 2013-10-30  11:06:45

Table of Contents 5

5 Troubleshooting

34 Troubleshooting

34 – General

35 – Picture

35 – Sound

6 Appendix

36 Controlling a TV with the Supplied

Remote Control

36 – Setting up the remote to control your

37 Additional Information

37 – File requirement

38 – Certain system requirements

39 Audio Output Specifications

40 Trademarks and Licenses

42 Specifications

43 Maintenance

43 – Handling the unit

Some of the content in this manual may dier from your unit depending on the software of the

unit or your service provider.

NB3630A-NB_DHKGLLK_ENG.indd 5 2013-10-30  11:06:45

Getting Started6

Getting Started

Introduction

Term Symbol Description

Note

Indicates special

notes and operating

features.

Caution

Indicates cautions

for preventing

possible damages

from abuse.

About the “

” symbol display

“

” may appear on your TV display during

operation and indicates that the function explained

in this owner’s manual is not available on that

specic media.

Accessories

Please check and identify the supplied accessories.

Remote control (1) Batteries (2)

HDMI cable (1) USB Cable (1)

Wall Mount Bracket

Installation Template

(1)

Wall bracket (1)

Cable ties for arranging

cables (2)

NB3630A-NB_DHKGLLK_ENG.indd 6 2013-10-30  11:06:51

Getting Started 7

Getting Started

Front Panel

a b c d e

f g h f

1/!

(Standby/On)

– / + (Volume)

Adjusts speaker volume.

(Play / Pause)

(Stop)

F (Function)

Press it repeatedly to select other function.

Speakers

Display window

USB Port

Open USB cover by using your nger to

connect USB.

Note

Precautions in using the touch buttons

Use the touch buttons with clean and dry

hands.

- In a humid environment, wipe out any

moisture on the touch buttons before

using.

Do not press the touch buttons hard to

make it work.

- If you apply too much strength, it can

damage the sensor of the touch buttons.

Touch the button that you want to work in

order to operate the function correctly.

Be careful not to have any conductive

material such as metallic object on the

touch buttons. It may cause the unit to

malfunction.

Caution

Rear Panel

HDMI OUT connector

OPT. IN connector

DC IN connector

NB3630A-NB_DHKGLLK_ENG.indd 7 2013-10-30  11:06:54

Getting Started8

Getting Started

Battery Installation

Remove the battery cover on the

rear of the Remote Control, and

insert two R03 (size AAA) battery

with

and matched correctly.

• • • • • •

(Power): Switches the unit ON

or OFF.

OPTICAL/TV SOUND:

Changes input mode to optical

directly.

FUNCTION (

): Changes input

mode.

0-9 numerical buttons: Selects

numbered options in a menu.

CLEAR: Removes a mark on the

search menu or a number when

setting the password.

REPEAT (

): Repeats a desired

section or sequence.

• • • • • •

• • • • •

c/v

(SCAN): Searches

backward or forward.

C/V

(SKIP): Goes to the

next or previous chapter/title/le.

(Stop): Stops playback.

(Play): Starts playback.

(Pause): Pauses playback.

SPEAKER LEVEL: Sets the sound

level of desired speaker.

SOUND EFFECT: Selects a sound

eect mode.

VOL +/-: Adjusts speaker volume.

AUDIO: Selects an audio language

or audio channel.

MUTE(

): Mute the unit.

• • • • • •

• • • • •

HOME (

): Displays or exits the

[Home Menu].

SUBTITLE: Selects a subtitle

language.

INFO/MENU (

): Displays or exits

On-Screen Display.

Direction buttons: Selects an

option in the menu.

ENTER (

): Acknowledges menu

selection.

BACK (

): Exits the menu or

resumes playback.

POP UP: Displays a pop-up menu,

if available.

SLEEP: Sets the system to turn off

automatically at a specified time.

• • • • • •

• • • • •

Colored (R, G, Y, B) buttons:

They are used as shortcut buttons

for specic menus.

TV Control Buttons: See page

36.

Remote Control

NB3630A-NB_DHKGLLK_ENG.indd 8 2013-10-30  11:06:58

Getting Started 9

Getting Started

Mounting the main

unit on a wall

You can mount the main unit on a wall.

Prepare screws and bracket.

Unit

Wall bracket

Wall Mount Bracket

Installation Template

1. Match the TV’s BOTTOM EDGE of Wall Mount

Bracket Installation Template with the bottom

of TV and attach to the position.

2. When you mount it on a wall (concrete), use

the wall plugs (Not supplied). You should drill

some holes. A guide sheet (Wall Mount Bracket

Installation Template) is supplied to drill. Use the

sheet to check the point to drill.

Wall Mount Bracket Installation Template

Screws and Wall Plugs are not supplied for

mounting the unit. We recommend the Hilti

(HUD-1 6 x 30) for the mounting.

Note

NB3630A-NB_DHKGLLK_ENG.indd 9 2013-10-30  11:07:01

Getting Started10

Getting Started

3. Remove the Wall Mount Bracket Installation

Template.

4. Fix it with screws (not supplied) as shown in the

illustration below.

5. Hang the main unit onto the bracket as shown

below.

Do not install this unit upside down. It can

damage the parts of this unit or be the

cause of personal injury.

Do not hang onto the installed unit and

avoid any impact to the unit.

Secure the unit rmly to the wall so that it

does not fall o. If the unit falls o, it may

result in an injury of a person or damage to

the product.

When the unit is installed on a wall, please

make sure that a child does not pull any of

connecting cables, as it may cause it to fall.

Caution

Detach the unit from the bracket as shown

below.

Note

NB3630A-NB_DHKGLLK_ENG.indd 10 2013-10-30  11:07:04

2 Connecting

Connecting 11

Connecting

Speaker Connection

Pairing wireless subwoofer

LED indicator of wireless subwoofer

LED Color Status

Yellow-green The wireless subwoofer is

receiving the signal of the unit.

Yellow-green

(blink)

The wireless subwoofer is trying

to connect.

Red The Wireless subwoofer is in

standby mode.

O (No

display)

The power cord of wireless

subwoofer is disconnected.

Setting up the wireless subwoofer

for the first time

1. Connect the power cord of the Wireless

subwoofer to the outlet.

2. Turn on the main unit : The main unit and

wireless subwoofer will be automatically

connected.

Manually pairing wireless subwoofer

When your connection is not completed, you can

see the red LED on the woofer and woofer is not

made sound. To solve the problem, follow the

below steps.

1. Press and hold

(Stop) button on the unit

and MUTE button on the remote control

simultaneously.

- Displays the “REMATE”.

2. Press PAIRING on back of the woofer.

- The Yellow-green LED will flicker.

3. Turn off and on the unit.

- If you see “Yellow-green” LED, it’ s successful.

4. If you don’t see “Yellow-green” LED, try again

Step 1 - Step 3.

If there is a strong electromagnetic wave

product nearby, interference may occur. Put

the unit (Wireless subwoofer and main unit)

away from there.

If you operate main unit then wireless

subwoofer sound within a few seconds in

standby mode.

Set the distance between this unit and

subwoofer Receiver within 10 m (32 ft.).

Optimum performance can be

implemented only when the unit and

the Wireless subwoofer within distance

of 2 m (6 ft.) to 10 m (32 ft.) is used since

communication failure may occur if longer

distance is used.

It takes a few seconds (and may take longer)

for the Wireless Transmitter and subwoofer

to communicate with each other.

Note

NB3630A-NB_DHKGLLK_ENG.indd 11 2013-10-30  11:07:04

Connecting12

Connecting

Connecting to Your TV

HDMI Connection

If you have a HDMI TV or monitor, you can connect

it to this unit using a HDMI cable (Type A, High

speed HDMI™ cable with Ethernet). Connect the

HDMI jack on the unit to the HDMI jack on a HDMI

compatible TV or monitor.

HDMI cable

Set the TV’s source to HDMI (refer to TV’s Owner’s

manual).

Additional Information for HDMI

When you connect a HDMI or DVI compatible

device, make sure of the followings:

Try switching o the HDMI/DVI device and

this unit. Next, switch on the HDMI/DVI

device and leave it for around 30 seconds,

then switch on this unit.

The connected device’s video input is set

correctly for this unit.

The connected device is compatible with

720 x 576p, 1280 x 720p, 1920 x 1080i or

1920 x 1080p video input.

Not all HDCP-compatible HDMI or DVI devices

will work with this unit.

The picture will not be displayed properly

with non-HDCP device.

If a connected HDMI device does not accept

the audio output of the unit, the HDMI

device’s audio sound may be distorted or

may not output.

When you use HDMI connection, you can

change the resolution for the HDMI output.

(Refer to “Resolution Setting” on page 14 )

Select the type of video output from the

HDMI OUT jack using [HDMI Color Setting]

option on the [Settings] menu (see page

18).

Changing the resolution when the

connection has already been established

may result in malfunctions. To solve the

problem, restart the unit.

When the HDMI connection with HDCP

is not veried, TV screen is changed to

black screen. In this case, check the HDMI

connection, or disconnect the HDMI cable.

If there are noises or lines on the screen,

please check the HDMI cable (length is

generally limited to 4.5 m(15 ft.)).

Note

NB3630A-NB_DHKGLLK_ENG.indd 12 2013-10-30  11:07:05

Connecting 13

Connecting

What is SIMPLINK?

Some functions of this unit are controlled by the

TV’s remote control when this unit and LG TV’s with

SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control :

Power on/o, volume up/down, etc.

Refer to the TV owner’s manual for the details of

SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as

shown above.

Depending on the state of the unit, some

SIMPLINK operation may dier from your

purpose or not work.

Note

ARC (Audio Return Channel)

function

The ARC function enables an HDMI capable TV to

send the audio stream to HDMI OUT of the unit.

To use this function:

Your TV must support the HDMI-CEC and ARC

function and the HDMI-CEC and ARC must be

set to on.

The setting method of HDMI-CEC and ARC may

dier depending on the TV. For details about

ARC function, refer to your TV manual.

You must use the HDMI cable (Type A, High

Speed HDMI™ cable with Ethernet).

You must connect the HDMI OUT on the unit

with HDMI IN of the TV that supports ARC

function using an HDMI cable.

You can connect only one Sound bar to TV

compatible with ARC.

To active [SIMPLINK/ARC] function, set this

option to [On]. (page 21)

Note

NB3630A-NB_DHKGLLK_ENG.indd 13 2013-10-30  11:07:06

Connecting14

Connecting

Resolution Setting

The unit provides several output resolutions for

HDMI OUT jack. You can change the resolution

using [Settings] menu.

1. Press HOME (

2. Use

A/D

to select the [Settings] and press

ENTER (

). The [Settings] menu appears.

3. Use

W/S

to select [DISPLAY] option then

press

to move to the second level.

4. Use

W/S

to select the [Resolution] option

then press ENTER (

) to move to the third

level.

5. Use

W/S

to select the desired resolution then

press ENTER (

) to confirm your selection.

If your TV does not accept the resolution

you have set on the unit, you can set

resolution to 576p as follows:

1. Press HOME (

) to disappear the HOME

menu.

2 Press

(Stop) for more than 5 seconds.

If you select a resolution manually and then

connect the HDMI jack to TV and your TV

does not accept it, the resolution setting is

set to [Auto].

If you select a resolution that your TV

does not accept, the warning message

will appear. After resolution change,

if you cannot see the screen, please

wait 20 seconds and the resolution will

automatically revert back to the previous

resolution.

Note

NB3630A-NB_DHKGLLK_ENG.indd 14 2013-10-30  11:07:06

Connecting 15

Connecting

Optical digital audio

connection

You can enjoy the sound from your TV with a

optical digital audio connection.

Optical digital cable

Connect the optical output jack of your TV into

the OPT. IN jack on the unit. And then select the

[OPTICAL] option by pressing FUNCTION (

). Or

press OPTICAL/TV SOUND to select directly.

Connections with

external device

OPTICAL IN connection

You can enjoy the sound from your component

with a digital optical connection through the

speakers of this system.

To the digital

optical output jack

of your component

Connect the optical output jack of your component

into the OPT. IN jack on the unit. And then select

the [OPTICAL] option by pressing FUNCTION (

Or press OPTICAL/TV SOUND to select directly.

You can also use the F (Function) button on the

front panel to select the input mode.

NB3630A-NB_DHKGLLK_ENG.indd 15 2013-10-30  11:07:08

3 System Setting

System Setting16

System Setting

Initial Setup

When you turn on the unit for the rst time, the

initial setup wizard appears on the screen.

1. Press

(Power).

The initial setup wizard appears on the screen.

2. Use

W/S/A/D

to select a display language

and press ENTER (

3. You can listen to TV sound through HTS Speaker

automatically when TV is turned on. TV and HTS

should be connected with optical cable. Press

to move and press

A/D

to select [On] or

[Off ]. Select [Next] and press ENTER (

4. Check all the settings that you have set in the

previous steps.

Press ENTER (

) while [Finish] is highlighted

to finish the initial setup settings. If there is any

settings to be changed, use

W/S/A/D

select

and press ENTER (

Settings

Adjust the setup settings

You can change the settings of the unit in the

[Settings] menu.

1. Press HOME

( ).

2. Use

A/D

to select the [Settings] and press

ENTER (

). The [Settings] menu appears.

3. Use

W/S

to select the first setup option, and

press

to move to the second level.

4. Use

W/S

to select a second setup option, and

press ENTER (

) to move to the third level.

5. Use

W/S

to select a desired setting, and press

ENTER (

) to confirm your selection.

NB3630A-NB_DHKGLLK_ENG.indd 16 2013-10-30  11:07:09

System Setting 17

System Setting

[DISPLAY] menu

TV Aspect Ratio

Select a TV aspect ratio option according to your TV

type.

[4:3 Letter Box]

Select when a standard 4:3 TV is connected.

Displays theatrical images with masking bars

above and below the picture.

[4:3 Pan Scan]

Select when a standard 4:3 TV is connected.

Displays pictures cropped to ll your TV screen.

Both sides of the picture are cut o.

[16:9 Original]

Select when a 16:9 wide TV is connected. The

4:3 picture is displayed with an original 4:3

aspect ratio, with black bars appearing at the

left and right sides.

[16:9 Full]

Select when a 16:9 wide TV is connected. The

4:3 picture is adjusted horizontally (in a linear

proportion) to ll the entire screen.

You cannot select [4:3 Letter Box] and

[4:3 Pan Scan] option when the resolution is

set to higher than 720p.

Note

Resolution

Sets the output resolution of the HDMI video signal.

Refer to page 14 for details about the resolution

setting.

[Auto]

If the HDMI OUT jack is connected to

TVs providing display information (EDID),

automatically selects the resolution best suited

to the connected TV.

[576p]

Outputs 576 lines of progressive video.

[720p]

Outputs 720 lines of progressive video.

[1080i]

Outputs 1080 lines of interlaced video.

[1080p]

Outputs 1080 lines of progressive video.

NB3630A-NB_DHKGLLK_ENG.indd 17 2013-10-30  11:07:09

System Setting18

System Setting

HDMI Color Setting

Select the type of output from the HDMI OUT jack.

For this setting, please refer to the manuals of your

display device.

[YCbCr]

Select when connecting to a HDMI display

device.

[RGB]

Select when connecting to a DVI display

device.

Home Menu Guide

This function allows you to display or delete the

guide bubble on the [HOME] menu. Set this option

to [On] for displaying guide.

[LANGUAGE] menu

Display Menu

Select a language for the [Settings] menu and on-

screen display.

NB3630A-NB_DHKGLLK_ENG.indd 18 2013-10-30  11:07:10

System Setting 19

System Setting

[AUDIO] menu

Each le has a variety of audio output options. Set

the unit’s Audio options according to the type of

audio system you use.

Since many factors aect the type of audio

output, see “Audio Output Specications” on

page 39 for details.

Note

Digital Output

[PCM Stereo] (HDMI only)

Select if you connect this unit’s HDMI OUT jack

to a device with two-channel digital stereo

decoder.

[PCM Multi-Ch] (HDMI only)

Select if you connect this unit’s HDMI OUT jack

to a device with multi-channel digital decoder.

[DTS Re-Encode] (HDMI only)

Select if you connect this unit’s HDMI OUT jack

to a device with DTS decoder.

[Bit Stream] (HDMI only)

Select if you connect this unit’s HDMI OUT jack

to a device with LPCM, Dolby Digital, Dolby

Digital Plus, DTS decoder.

When [Digital Output] option is set to [PCM

Multi-Ch], the audio may output as PCM

Stereo if the PCM Multi-Ch information is

not detected from HDMI device with EDID.

This setting is not available on the input

signal from an external device.

Note

DRC (Dynamic Range Control)

This function allows you to listen to a movie at a

lower volume without losing clarity of sound.

[O ]

Turns o this function.

[On]

Compress the dynamic range of the Dolby

Digital, Dolby Digital Plus audio output.

[Auto]

The dynamic range of the Dolby Digital and

Dolby Digital Plus are operated as same as the

[On] mode.

HD AV Sync

Sometimes Digital TV encounters a delay between

picture and sound. If this happens you can

compensate by setting a delay on the sound so

that it eectively ‘waits’ for the picture to arrive:

this is called HD AV Sync. Use

to scroll up and

down through the delay amount, which you can

set at anything between 0 and 300 ms.

NB3630A-NB_DHKGLLK_ENG.indd 19 2013-10-30  11:07:10

System Setting20

System Setting

[OTHERS] menu

DivX® VOD

ABOUT DIVX VIDEO: DivX® is a digital video

format created by DivX, LLC, a subsidiary of Rovi

Corporation. This is an ocial DivX Certied® device

that plays DivX video. Visit divx.com for more

information and software tools to convert your les

into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX

Certied® device must be registered in order to play

purchased DivX Video-on-Demand (VOD) movies.

To obtain your registration code, locate the DivX

VOD section in your device setup menu. Go to vod.

divx.com for more information on how to complete

your registration.

[Register]

Displays the registration code of your unit.

[Deregister]

Deactivate your unit and display the

deactivation code.

All the downloaded videos from DivX® VOD

with this player’s registration code can only be

played on this unit.

Note

Auto Power Off

The screen saver appears when you leave the unit

in Stop mode for about ve minutes. If you set

this option to [On], the unit automatically turns

o within 20 minutes since the screen saver is

displayed. Set this option to [O] to leave the

screen saver until the unit is operated by the user.

When you set [Auto Power O ] function in

setting menu on, this unit will be o itself to

save electronic consumption in the case main

unit is not connected to external device and is

not used for 25 minutes.

Note

Quick Start

This unit can stay in standby mode with low power

consumption, so that the unit can instantly boot

without delay when you turn on this unit. Set this

option to [On] for activating [Quick Start] function.

If [Quick Start] option is set to [On] and

an AC power is accidently re-connected

to the unit by power failure etc., the unit

automatically boots itself to be the standby

status. Before operating the unit, wait for a

while until the unit is in standby status.

When [Quick Start] is set to [On], power

consumption will be higher than when

[Quick Start] is set to [O ].

Note

NB3630A-NB_DHKGLLK_ENG.indd 20 2013-10-30  11:07:10

Pagina se încarcă ...

LG NB3630A Manualul proprietarului

Marca: LG

Model: NB3630A

Categorie: Playere media digitale

Tip: Manualul proprietarului

Acest manual este potrivit și pentru

S33A1-D

Descărcați PDF

raport

în alte limbi

English: LG NB3630A Owner's manual
italiano: LG NB3630A Manuale del proprietario

LG NB3630A Manualul proprietarului

Acest manual este potrivit și pentru

LG NB3630A Manualul proprietarului

în alte limbi

Lucrări conexe

Alte documente