Yamaha RDX-E700 Manualul proprietarului

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

©

OWNER S MANUAL

MODE D EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

AMPLI-TUNER DVD

DVD RECEIVER

G

Printed in China CQX1A1058Z

RDX-E700

i

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean

place with at least 10 cm on the top, 10 cm on the left and right,

and 10 cm at the back of RDX-E700 — away from direct

sunlight, heat sources, vibration, dust, moisture, and/or cold.

3 Locate this unit away from other electrical appliances, motors, or

transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold

to hot, and do not locate this unit in an environment with high

humidity (i.e. a room with a humidifier) to prevent condensation

inside this unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto this

unit and/or this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, damage

to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid

may cause electrical shock to the user and/or damage to this

unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc.

in order not to obstruct heat radiation. If the temperature inside

this unit rises, it may cause fire, damage to this unit, and/or

personal injury.

7 Do not plug in this unit to a wall outlet until all connections are

complete.

8 Do not operate this unit upside-down. It may overheat, possibly

causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, grasp

the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage

the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit

with a higher voltage than specified is dangerous and may cause

fire, damage to this unit, and/or personal injury. YAMAHA will

not be held responsible for any damage resulting from use of this

unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cord and outdoor

antennas disconnected from a wall outlet or the unit during a

lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified

YAMAHA service personnel when any service is needed.

The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e.

vacation), disconnect the AC power plug from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit is

faulty.

17 Before moving this unit, press STANDBY/ON to set this unit in

standby mode, and disconnect the AC power plug from the wall

outlet.

18 Condensation will form when the surrounding temperature

changes suddenly. Disconnect the power cable from the outlet,

then leave the unit alone.

19 When using the unit for a long time, the unit may become warm.

Turn the power off, then leave the unit alone for cooling.

DANGER

When this unit is plugged to the wall outlet, do not place your

eyes close to the opening of the disc tray and other openings to

look into inside.

■ For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the instructions

described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as

long as it is connected to the wall outlet, even if this unit itself

is turned off. This state is called the standby mode. In this

state, this unit is designed to consume a very small quantity of

power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide

slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

The laser component in this product is capable of emitting

radiation exceeding the limit for Class 1.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this appa-

ratus may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to

the terminal which is marked with the letter N or coloured

BLACK. The wire which is coloured BROWN must be

connected to the terminal which is marked with the letter L

or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

1

English

PREPARATIONINTRODUCTION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

FEATURES............................................................. 2

About this manual...................................................... 2

SUPPLIED ACCESSORIES ................................. 2

CONTROLS AND FUNCTIONS ......................... 3

Front panel ................................................................. 3

Display....................................................................... 4

Remote control........................................................... 5

CONNECTING SPEAKERS ................................ 7

Connecting speakers .................................................. 8

Connecting a subwoofer ............................................ 8

CONNECTING A TV ............................................ 9

CONNECTING ANTENNAS.............................. 10

Connecting the AM loop antenna ............................ 10

Connecting the FM antenna..................................... 10

CONNECTING EXTERNAL

COMPONENTS ............................................... 11

Connecting a CD recorder or MD recorder ............. 11

Connecting the Power Cables.................................. 12

INSTALLING BATTERIES IN THE REMOTE

CONTROL........................................................ 13

USING THE REMOTE CONTROL .................. 13

TURNING THE POWER

TO ON/STANDBY ........................................... 14

SELECTING AN INPUT SOURCE................... 14

ADJUSTING THE VOLUME LEVEL .............. 15

MUTING THE SOUND (MUTE) ....................... 15

ADJUSTING THE CLOCK................................ 16

SETTING THE TIMER ...................................... 16

SETTING THE SLEEP TIMER......................... 17

CHANGING THE BRIGHTNESS OF THE

DISPLAY........................................................... 18

CHANGING DVD SETTING ON THE TV

(OSD MENU).................................................... 19

Operating the OSD menu......................................... 19

OSD guide ............................................................... 20

SUPPORTED DISC TYPES ............................... 21

BASIC PLAYBACK OPERATIONS ................. 22

USEFUL PLAYBACK OPERATIONS ............. 23

Customizing playback order (Program Play) .......... 23

Playing back randomly

(Random Play)..................................................... 24

Playing back repeatedly

(Repeat Play) ....................................................... 25

Operating disc menus (DVD menu/Video CD

Playback Control)................................................ 27

SELECTING AUDIO, SUBTITLE

AND ANGLE ................................................... 28

Selecting Audio and Subtitle Languages................. 28

Selecting a Viewing Angle ...................................... 28

ZOOMING IMAGES ..........................................29

USING GUI............................................................30

ENJOYING HIGH-QUALITY VIDEO

(NTSC/PROGRESSIVE SCAN)......................31

ENJOYING MULTIMEDIA FILES

ON DISCS ..........................................................32

TUNING RADIO STATIONS .............................33

Tuning radio stations automatically

(Auto Tuning)...................................................... 33

Tuning radio stations manually (Manual Tuning)... 33

Selecting preset radio stations (Preset Tuning) ....... 34

Receiving FM Radio Data System stations

(U.K. and Europe models only)........................... 34

PRESETTING RADIO STATIONS ...................36

Presetting radio stations automatically

(Auto Preset)........................................................ 36

Presetting radio stations manually

(Manual Preset) ................................................... 36

Editing the name of preset radio stations................. 37

PLAYING BACK EXTERNAL SOURCES.......38

TV playback ............................................................ 38

Other component playback ...................................... 38

RECORDING SOURCES WITH EXTERNAL

COMPONENTS ................................................39

Recording audio sources with the DVD receiver .... 39

ADJUSTING SOUNDS ........................................40

Adjusting Sound Settings ........................................ 40

Night listening mode ............................................... 41

CONTROLLING EXTERNAL

COMPONENTS ................................................42

Setting remote control codes ................................... 42

Available operations ................................................ 43

TROUBLESHOOTING .......................................44

General..................................................................... 44

Remote control ........................................................ 45

Disc playback .......................................................... 46

Radio reception........................................................ 47

ADDITIONAL INFORMATION........................48

Disc Information...................................................... 48

Handling a disc ........................................................ 49

GLOSSARY...........................................................50

Audio formats .......................................................... 50

Audio information ................................................... 50

Video signal information ......................................... 51

Copyright and logo marks ....................................... 51

SPECIFICATIONS...............................................52

CONTENTS

INTRODUCTION

PREPARATION

BASIC OPERATION

ADVANCED OPERATION

ADDITIONAL INFORMATION

FEATURES

2

• Plays DVDs, Video CDs, Audio CDs, MP3 CDs,

WMA CDs, DivX CDs and JPEG CDs.

• Easy operation with the MULTI JOG

• Full function remote control

• On Screen Display (OSD) Menu

• DIGITAL OPTICAL OUT jack

• In this manual, operations that can be performed using either the DVD receiver or its remote control are explained using the remote

control.

• Remote control descriptions and illustrations in this manual are based on the U.K. and Europe models unless otherwise specified.

• y indicates a tip for your operation.

• Notes contain important information about safety and operating instructions.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In

case of differences between the manual and the product, the product has priority.

This product includes the following accessories. Before connecting speakers or a TV to this product, make sure you received all of the

following parts.

FEATURES

About this manual

SUPPLIED ACCESSORIES

POWER

TV

STANDBY/ON

1234

5678

90

DIMMER

REPEAT

PROG

A-B

TV CH

TV INPUT

FREQ/TEXT

RANDOM

MODE START

PTY SEEK

uPRESETPRESETd

MENUGUI

ENTER

SET UP

MUTE

NIGHT

TV

AUX

DVD/CD

TUNER

EQ

DIRECT

SUBTITLE

ANGLE ZOOM AUDIO

TV VOL

VOLUME

TOP MENU

/

RETURN

SLEEP

+

–

+

–

+

–

Indoor FM antenna

Video pin

cable

AM loop antenna

Batteries (x2)

(AA, R06, UM-3)

Remote

control

3

English

INTRODUCTION

1 STANDBY/ON

Turns this unit on. Press this button again to set the unit to

the standby mode (page 14).

2

Opens and closes the disc tray. Pressing during

standby mode turns on the DVD receiver and sets the input

source to DVD/CD.

3 Disc tray

Holds a disc to be played.

4 Display

Displays playback information or settings (page 4).

5 s

Stops disc playback.

6 INPUT

Selects an input source.

7 h/e

Starts and pauses disc playback.

8 PHONES jack

Connects headphones.

9 TIMER

Sets the DVD receiver to the timer play mode or sleep

mode.

0 DISPLAY

Displays the status information such as the elapsed time of

current track/chapter.

A SOUND

Switches the sound settings to be adjusted.

B MULTI JOG

Adjusts various settings and the frequency when tuning

radio station. You can also skip chapters or tracks when

the input source is set to DVD/CD.

C MODE

Supports MULTI JOG and enables various operations.

D Remote control sensor

Receives signals from the remote control.

E VOLUME

Adjusts the volume level.

CONTROLS AND FUNCTIONS

Front panel

STANDBY/ON

PHONES TIMER

DISPLAY SOUND MODE

VOLUME

INPUT

PUSH-ENTER

MULTI JOG

890A B CD E

12 3 4 6 75

4

CONTROLS AND FUNCTIONS

1 Playback mode indicator

Displays the icon for the selected playback mode.

2 Pause icon

Lights up when disc playback is paused.

3 Playback icon

Lights up during disc playback.

4 MUTE

Lights up when the mute function is activated.

5 PROGRESSIVE

Lights up when the progressive scan function is activated.

6 SLEEP

Lights up when the sleep timer function is activated.

7

Lights up when the timer play function is activated.

8

Lights up when receiving a strong radio signal when the

input source is set to AM or FM.

9 Display mode indicator

Lights up depending on the disc type.

0 ST

Lights up when receiving a strong FM radio signal in the

FM stereo mode.

A MEMORY

Lights up or blinks when presetting an FM/AM radio

station.

B Display

Displays various information such as a title, chapter or

track number, or elapsed playing time.

Display

RNDM

A-B

TITLE

TRK

CHAP

SF

PROG

PROGRESSIVE

SLEEP

MUTE ST MEMORY

123 45678

90AB

5

CONTROLS AND FUNCTIONS

English

INTRODUCTION

■ Common functions

Remote control descriptions and illustrations in this manual are

based on the U.K. and Europe models unless otherwise specified.

The DVD receiver has two main operation modes. Before

operating functions in each mode, you need to select a

mode to change the remote control button assignments.

To switch the operation mode

• DVD/CD mode: Press DVD/CD.

• TUNER mode: Press TUNER. For details on tuner

operations, refer to “TUNING RADIO STATIONS”

(page 33).

y

You can also operate the TV and other components connected to

the DVD receiver using the remote control. For details, refer to

“CONTROLLING EXTERNAL COMPONENTS” (page 42).

Operations common to all modes

1 Infrared signal transmitter

Sends signals to the DVD receiver.

2 STANDBY/ON ( )

Turn the DVD receiver on, or set it to the standby mode

(page 14).

3 MUTE

Turns off the volume. Press again to resume the volume.

4 NIGHT

Switches the night listening mode on or off (page 41).

5 EQ

Switches the EQ MODE (page 40).

6 DIRECT

Switches the DIRECT mode on or off.

7 SLEEP

Sets the sleep timer (page 17).

8 DIMMER

Changes the brightness of the display (page 18).

9 VOLUME +/–

Adjusts the overall volume level.

0 Input selection buttons

Selects the input source of the DVD receiver (page 14).

Remote control

POWER

TV

STANDBY/ON

1234

5678

90

DIMMER

SLEEP

DVD/CD

• Playback

• Subtitle and

audio language

selection, etc.

FM/AM

• Radio station

tuning

• Radio station

preset, etc.

DVD/CD mode

TUNER

mode

TUNER

NIGHT

TV

AUX

DVD/CD

TUNERDIRECT

EQ

SUBTITLE

ANGLE ZOOM AUDIO

+

–

+

–

DVD/CD

POWER

TV

STANDBY/ON

1234

5678

90

DIMMER

REPEAT

PROG

A-B

TV CH

TV INPUT

FREQ/TEXT

RANDOM

MODE START

PTY SEEK

uPRESETPRESET

d

MENUGUI

ENTER

SET UP

MUTE

NIGHT

TV

AUXDIRECT

DVD/CD

TUNER

EQ

SUBTITLE

ANGLE ZOOM AUDIO

TV VOL

VOLUME

TOP MENU

/

RETURN

SLEEP

+

–

+

–

+

–

7

8

3

4

6

5

0

9

1

2

Note

6

CONTROLS AND FUNCTIONS

■ DVD/CD mode Operations available only in DVD/CD mode

1 Number buttons (1 to 9, 0)

Press these buttons to enter numbers.

2 REPEAT

Enables the Repeat Play mode (page 25).

3 s

Stops disc playback.

4 e

Pauses disc playback.

5 h

Starts disc playback.

6 b, a

Skips to the start of the current chapter/track or next

chapter/track.

7 GUI

Displays the status information such as the elapsed time of

current track/chapter on the TV screen.

8 SET UP

Displays the OSD menu on the TV screen (page 19).

9 SUBTITLE

Selects subtitle language (page 28).

0 ANGLE

Selects a viewing angle (page 28).

A A-B

Enables the A-B Repeat mode (page 26).

B PROG

Enables the Program Play mode (page 23).

C RANDOM

Enables the Random Play mode (page 24).

D MENU

Displays the DVD menu on the TV screen (page 27).

E TOP MENU/RETURN

Returns the DVD menu to the previous screen (page 27).

F / / / / ENTER

Operates the OSD menu (page 19).

G AUDIO

Selects audio language (page 28).

H ZOOM

Zooms in a specified part of picture (page 29).

POWER

TV

STANDBY/ON

1234

5678

90

DIMMER

REPEAT

PROG

A-B

TV CH

TV INPUT

FREQ/TEXT

RANDOM

MODE START

PTY SEEK

uPRESETPRESET

d

MENUGUI

ENTER

SET UP

MUTE

NIGHT

TV

AUXDIRECT

DVD/CD

TUNER

EQ

SUBTITLE

ANGLE ZOOM AUDIO

TV VOL

VOLUME

TOP MENU

/

RETURN

SLEEP

+

–

+

–

+

–

A

1

5

6

7

8

B

C

D

E

F

G

H

4

3

0

9

2

CONNECTING SPEAKERS

7

English

PREPARATION

Follow the procedure below to connect speakers to the DVD receiver. Here, the connection example uses the YAMAHA

NX-E700 (consisting of two speakers) and its supplied cables. For information on your speakers, refer to the owner’s

manual for the speakers.

y

You can also use commercially available speakers (see page 8).

• Do not connect the power cable of the DVD receiver until all cable connections are completed.

• Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound

will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage the DVD

receiver and/or the speakers.

• Use speakers with the specified impedance shown on the rear panel of this unit.

• Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the speakers away

from the monitor.

CONNECTING SPEAKERS

Notes

L

R

MAINS

SPEAKERS

DIGITAL

OPTICAL

AUXVIDEO OUT TV

IN INOUT

VIDEO

COMPONENT

TUNER

AM

GND

ANT

FM ANT

75

Ω UNBAL.

Y

P

B

PR

OUT

6Ω MIN. /SPEAKER

RL

SUB WOOFER

OUT

L speaker

R speaker

DVD receiver

Speaker cable

CONNECTING SPEAKERS

8

1 Remove approximately 10 mm (3/8 in) of

insulation from the end of each speaker

cable and twist the exposed wires of the

cable together to prevent short circuits.

2 Press and hold the lever.

3 Insert one bare wire. By releasing the lever,

the lever is replaced.

■ Notes on the speaker cord

A speaker cord is actually a pair of insulated cables

running side by side. One cable is colored or shaped

differently, perhaps with a stripe, groove or ridge. Connect

the striped (grooved, etc.) cable to the “+” (red) terminals

on the DVD receiver and your speaker. Connect the plain

cable to the “–” (black) terminals on the DVD receiver

and your speaker.

Connect the SUBWOOFER OUT jack on the DVD

receiver to the INPUT jack on the subwoofer

using the subwoofer cable.

• Do not connect the power cable of the DVD receiver or

subwoofer until all cable connections are completed.

• The low frequency range of the downmixed sound is output at

the SUBWOOFER OUT jack.

Connecting speakers

10 mm (3/8 in)

Red: positive (+)

Black: negative (–)

Red: positive (+)

Black: negative (–)

Connecting a subwoofer

Notes

SPEAKERS

6Ω MIN. /SPEAKER

RL

SUB WOOFER

OUT

INPUT

Subwoofer

Subwoofer cable

CONNECTING A TV

9

English

PREPARATION

Follow the procedure below to connect your TV to the DVD receiver using the supplied video pin cable and audio cables

(sold separately). Also, you can enjoy high-quality pictures with a component video connection or a scart connection

(U.K. and Europe models only). For information about your TV, refer to the supplied manual.

• Do not connect the power cable of the DVD receiver until all cable connections are completed.

• Turn off the TV before connecting it to the DVD receiver.

1 Connect the VIDEO jack on the DVD receiver

to the video input jack on your TV using the

supplied video pin cable.

2 To output sound from the speakers

connected to the DVD receiver, connect the

TV IN jacks on the DVD receiver to the audio

output jacks on your TV using an audio pin

cable (sold separately).

■ Other connection methods

To make a component video connection or a scart

connection (U.K. and Europe models only), a

corresponding cable is required.

Component video connection

Connect the VIDEO OUT COMPONENT jacks on the

DVD receiver to the component video input jacks on your

TV using a commercially available component video

cable.

Scart connection (for U.K. and Europe models)

Connect the AV terminal on the DVD receiver to the scart

input terminal on your TV using a commercially available

scart cable.

RGB/YUV selector switch

Selects the terminal where the video signals are output at.

Slide this switch to the YUV position to output the

component signals at the COMPONENT jacks.

Slide this switch to the RGB position to output the RGB

signals at the AV terminal.

When the RGB/YUV selector switch is set to “RGB”, Progressive

Scan (page 31) is not available.

CONNECTING A TV

Notes

L

R

MAINS

SPEAKERS

DIGITAL

OPTICAL

AUXVIDEO OUT TV

IN INOUT

VIDEO

COMPONENT

TUNER

AM

GND

ANT

FM ANT

75

Ω UNBAL.

Y

P

B

PR

OUT

6Ω MIN. /SPEAKER

RL

SUB WOOFER

OUT

VIDEO

AUDIO

L

R

IN

TV

Audio cable

(sold separately)

Video pin

cable

(supplied)

Note

L

R

DIGITAL

OPTICAL

AUXVIDEO OUT TV

IN INOUT

VIDEO

COMPONENT

TUNER

AM

GND

ANT

FM ANT

75

Ω UNBAL.

Y

P

B

PR

OUT

O

OFER

U

T

Component video jacks

L

R

DIGITAL

OPTICAL

AUXVIDEO OUT TV

IN INOUT

VIDEO

COMPONENT

TUNER

AM

GND

ANT

FM ANT

75

Ω UNBAL.

Y

P

B

PR

OUT

O

OFER

T

YUV RGB

AV

(U.K. and Europe models)

AV terminal

RGB/YUV selector switch

CONNECTING ANTENNAS

10

To enjoy radio on the DVD receiver, you need to connect AM and FM antennas to the DVD receiver. This product

includes an AM loop antenna and indoor FM antenna. If there is a problem of weak radio wave reception in your area or

you want to improve radio reception, we recommend that you use optional outdoor antennas. For details, consult the

nearest authorized YAMAHA dealer or service center.

■ About grounding

For maximum safety and minimum interference, connect

the antenna GND terminal to a good earth ground. A good

earth ground is a metal stake driven into moist earth.

1 Attach the antenna stand to the antenna.

When attaching the antenna to the wall, you do not

need to use the antenna stand.

2 Press and hold the tab.

3 Insert the AM loop antenna lead wires into

the AM ANT terminal.

4 Release the tab.

5 Repeat steps 2 to 4 to insert the AM loop

antenna lead wires into the GND terminal.

6 Place the antenna away from the DVD

receiver and speaker cables.

While listening to the radio, rotate the antenna head

to find the best angle for reception.

1 Connect the supplied indoor FM antenna to

the FM ANT jack on the DVD receiver.

2 Place the antenna away from the DVD

receiver and speaker cables.

CONNECTING ANTENNAS

Connecting the AM loop antenna

L

R

DIGITAL

OPTICAL

AUXVIDEO OUT TV

IN INOUT

VIDEO

COMPONENT

TUNER

AM

GND

ANT

FM ANT

75

Ω UNBAL.

Y

P

B

PR

OUT

Indoor FM

antenna

(supplied)

AM loop

antenna

(supplied)

Ground

(GND terminal)

Connecting the FM antenna

CONNECTING EXTERNAL COMPONENTS

11

English

PREPARATION

You can connect external components such as a CD recorder or MD recorder to the following jacks on the DVD receiver.

This section provides an example of other equipment connections. For information on your equipments, refer to the

manuals for them.

If you connect a CD recorder or MD recorder to the DVD

receiver using optical cables, you can record audio sources

played on the DVD receiver digitally. Also, you can enjoy

audio sources played on the recorder with the DVD

receiver.

y

AM/FM broadcasts cannot be output from this unit’s DIGITAL

OPTICAL OUT jack. To record AM/FM broadcasts, use a

commercially available audio cable to connect the AUX OUT

jack on the DVD receiver to the analog input jack on your

recorder.

• Turn off the component before connecting it to the DVD

receiver.

• Do not connect the power cable of the DVD receiver until all

cable connections are completed.

1 Connect the DIGITAL OPTICAL OUT jack on

the DVD receiver to the digital input jack on

the recorder using an optical cable.

2 Connect the AUX OUT jacks on the DVD

receiver to the analog input jacks on the

recorder using an audio cable.

3 Connect the AUX IN jacks on the DVD

receiver to the analog output jacks on the

recorder using an audio cable.

CONNECTING EXTERNAL COMPONENTS

Connecting a CD recorder or MD

recorder

Notes

L

R

DIGITAL

OPTICAL

VIDEO OUT

AUX TV

OUT IN IN

VIDEO

COMPONENT

TUNER

AM

ANT

GND

FM ANT

75

Ω UNBAL.

PB

PR

Y

OUT

L

R

ANALOG

DIGITAL

OPTICAL

IN

OUTIN

CD recorder or

MD recorder

Optical

cable

Audio

cable

CONNECTING EXTERNAL COMPONENTS

12

■ About the AUX jacks

• The signal input from the AUX IN jack is not output

from the AUX OUT jack.

• The DVD receiver’s digital and analog signal circuits

are independent of each other. Analog input signals are

output only from analog output jacks.

■ About the DIGITAL jack

• The digital jack is compatible with PCM, Dolby

Digital and DTS signals.

• The digital jack is designed based on EIA standards. To

make a digital connection, use an optical cable that

meets EIA standards.

y

This unit can output a DTS signal digitally. To reproduce a DTS

encoded source, connect the DIGITAL OPTICAL OUT jack on

the DVD receiver to the digital input jack on a component that

features a DTS decoder.

After you made all connections, connect the power cables

of the DVD receiver and subwoofer (optional).

Connecting the Power Cables

MAINS

SPEAKERS

6Ω MIN. /SPEAKER

RL

SUB WOOFER

OUT

MAINS

To an AC wall outlet

13

English

PREPARATION

■ To replace the batteries

Change all of the batteries if the operation range of the remote

controls decreases.

• Do not use an old battery together with new one.

• Do not use different types of batteries (for example, alkaline

and manganese) together. Each type of battery has its own

characteristics even if they are similar in shape.

• If the batteries run out, immediately remove them from the

remote control to prevent an explosion or acid leak.

• Dispose of the batteries according to the regional regulations.

• If a battery starts leaking, dispose of it immediately. Be careful

not to let leaking battery acid come into contact with your skin

or clothing. Before inserting new batteries, wipe the

compartment clean.

• Replace the batteries within two minutes to preserve the

memory in the remote control.

1 Press the mark on the battery cover and

open the cover.

2 Insert the two supplied batteries (AA, R06,

UM-3) into the battery compartment.

Make sure you insert the batteries according to the

polarity markings (+ and –).

3 Close the battery cover.

Use the remote control within 6 m (20 feet) of the DVD

receiver and point it toward the remote control sensor

(page 3).

• Be careful not to spill liquid on the remote control.

• Be careful not to drop the remote control.

• Do not leave the remote control in the following places:

– hot or humid places, such as near a heater or in a bathroom

– extremely cold places

– dusty places

INSTALLING BATTERIES IN THE REMOTE CONTROL

Notes

Press

USING THE REMOTE CONTROL

STANDBY/ON

PHONES TIMER

DISPLAY SOUND MODE

VOLUME

INPUT

PUSH-ENTER

MULTI JOG

30˚ 30˚

Within 6 m

(20 feet)

Notes

TURNING THE POWER TO ON/STANDBY

14

Press STANDBY/ON once to turn on the DVD

receiver.

Press STANDBY/ON again to set the DVD

receiver to the standby mode.

y

You can set the DVD receiver to the eco standby mode by

pressing DISPLAY on the front panel during standby mode. In

this mode, all display in the DVD receiver turns off. To cancel the

eco standby mode, press DISPLAY during eco mode.

You can enjoy various sources with the DVD receiver. After connecting the TV, speakers, antennas, or other equipment,

follow the procedure below to select an input source you want to play on the DVD receiver. For information on

connection methods, refer to pages 8 to 12.

Perform one of the following operations

To switch to DVD/CD input:

Press DVD/CD.

To switch to external source input (external

equipment connected to the DVD receiver):

Press AUX.

To switch to TV input:

Press TV.

U.K. and Europe models only

You can switch the input signals between signals

input at the TV IN jacks and signals input at AV

terminal (page 20).

To switch to tuner input (AM/FM radio):

Press TUNER.

Each time you press TUNER, the input source

switches between AM and FM.

■ To select an input source using INPUT

on the front panel

Press INPUT repeatedly.

Each time you press INPUT, the input source changes as

follows:

*

SCART is applicable only for U.K and Europe models.

TURNING THE POWER TO ON/STANDBY

STANDBY/ON ( )

POWER

TV

STANDBY/ON

1234

5678

90

DIMMER

REPEAT

A-B

TV CH

SLEEP

+

SELECTING AN INPUT SOURCE

MUTE

NIGHT

TV

AUXDIRECT

DVD/CD

TUNER

EQ

SUBTITLE

ANGLE ZOOM AUDIO

TV VOL

VOLUME

+

–

+

–

AUX

TV

DVD/CD

TUNER

DVD/CD

FM

AM

TV/SCART*

AUX

ADJUSTING THE VOLUME LEVEL

15

English

BASIC

OPERATION

Press VOLUME + to increase the volume level

and VOLUME – to decrease.

Press MUTE to mute the sound.

To restore audio output to the previous volume level, press

MUTE again or press VOLUME +/–.

ADJUSTING THE VOLUME LEVEL

VOLUME +/–

MUTE

NIGHT

TV

AUX

DVD/CD

TUNER

EQ

DIRECT

SUBTITLE

ANGLE ZOOM AUDIO

TV VOL

VOLUME

+

–

+

–

MUTING THE SOUND (MUTE)

VOLUME +/–

MUTE

NIGHT

TV

AUX

DVD/CD

TUNER

EQ

DIRECT

SUBTITLE

ANGLE ZOOM AUDIO

TV VOL

VOLUME

+

–

+

–

MUTE

ADJUSTING THE CLOCK

16

1 Press TIMER on the front panel to select

“TIME” and then press MULTI JOG.

2 Rotate MULTI JOG to adjust the hour and

then press MULTI JOG.

3 Rotate MULTI JOG to adjust the minute and

then press MULTI JOG.

4 Press MULTI JOG again to set the time.

You cannot set timer unless you adjust the clock.

You can set the timer function so that the DVD receiver turns on at the specified time and begins to play the selected input

source automatically.

1 Press TIMER on the front panel to select

“TIMER” and then press MULTI JOG.

2 Rotate MULTI JOG clockwise to select

“TIMER ON” and then press MULTI JOG.

The current timer setting is displayed.

3 Set the time that timer play begins using the

MULTI JOG, and then press MULTI JOG.

4 Rotate MULTI JOG to select the input source

to be played and then press MULTI JOG.

5 Rotate MULTI JOG to set the duration (30 to

90 min) and then press MULTI JOG.

You can set the duration in 10 minutes steps.

■ To cancel the timer

Select “TIMER OFF” in step 2.

ADJUSTING THE CLOCK

MULTI JOG

STANDBY/ON

PHONES TIMER

DISPLAY SOUND MODE

VOLUME

INPUT

PUSH-ENTER

MULTI JOG

MULTI JOGTIMER

Note

SETTING THE TIMER

STANDBY/ON

PHONES TIMER

DISPLAY SOUND MODE

VOLUME

INPUT

PUSH-ENTER

MULTI JOG

TIMER

SETTING THE SLEEP TIMER

17

English

BASIC

OPERATION

If you set the sleep timer, the DVD receiver automatically turns to the Standby mode after the specified time.

Press SLEEP repeatedly to set the duration for

the sleep timer.

Each time you press SLEEP, the duration changes as

follows:

y

• The DVD receiver automatically turns to the dimmer mode.

• The sleep timer only works for the DVD receiver. It does not

turn off other equipment connected to the DVD receiver.

• The sleep timer is canceled if you turn the DVD receiver to the

Standby mode.

• The DVD receiver stores the mode or playback settings in its

memory when it automatically turns to the Standby mode. You

can use those settings when you turn on the DVD receiver next

time.

■ To set the sleep timer using MULTI JOG

Press TIMER on the front panel repeatedly until “SLEEP”

appears in the DVD receiver display.

Rotate MULTI JOG to set the duration (5 to 240 min).

You can set the duration in 5 minutes steps (5 to 60 min),

10 minutes steps (60 to 120 min), or 30 minutes steps (120

to 240 min).

■ To cancel the sleep timer

Press SLEEP repeatedly until “SLEEP” disappears from

the DVD receiver display.

You can also cancel the sleep timer using MULTI JOG.

Press TIMER on the front panel repeatedly until “SLEEP”

appears in the DVD receiver display, and then rotate

MULTI JOG to select “SLEEP-00”.

SETTING THE SLEEP TIMER

SLEEP

POWER

TV

STANDBY/ON

1234

5678

90

DIMMER

REPEAT

PROG

A-B

TV CH

TV INPUT

FREQ/TEXT

RANDOM

MODE START

PTY SEEK

uPRESETPRESET

d

MENUGUI

ENTER

SET UP

MUTE

NIGHT

TV

AUX

DVD/CD

TUNERDIRECT

EQ

SUBTITLE

ANGLE ZOOM AUDIO

TV VOL

VOLUME

TOP MENU

/

RETURN

SLEEP

+

–

+

–

+

–

Notes

SLEEP-30

SLEEP-60

SLEEP-120

Sleep timer off

CHANGING THE BRIGHTNESS OF THE DISPLAY

18

You can change the brightness of the DVD receiver display.

Press DIMMER.

Each time you press DIMMER, the brightness of the

display switches between Dimmer on and Dimmer off.

■ To cancel the dimmer mode

Press DIMMER again.

CHANGING THE BRIGHTNESS OF THE DISPLAY

DIMMER

POWER

TV

STANDBY/ON

1234

5678

90

DIMMER

REPEAT

PROG

A-B

TV CH

TV INPUT

FREQ/TEXT

RANDOM

MODE START

PTY SEEK

uPRESETPRESET

d

MENUGUI

ENTER

SET UP

MUTE

NIGHT

TV

AUX

DVD/CD

TUNERDIRECT

EQ

SUBTITLE

ANGLE ZOOM AUDIO

TV VOL

VOLUME

TOP MENU

/

RETURN

SLEEP

+

–

+

–

+

–

Pagina se încarcă...

Yamaha RDX-E700 Manualul proprietarului

Yamaha RDX-E700 Manualul proprietarului

în alte limbi

Lucrări înrudite