Candy 34005134 Manual de utilizare

User Instruction

No-Frost Refrigerator Freezer

Content

1. Safety Information Page 1~9

2. Overview Page 10~11

3. Installation Page 12~17

4. User interface Page 18~19

5. Daily Use Page 20~24

Safety information

1

In the interest of your safety and to ensure correct

operation, prior to installation and initial use please read

this user manual carefully, including its tips and warnings.

To avoid unnecessary mistakes and accidents, it is

important to ensure that all people using the appliance are

thoroughly familiar with its operation and safety features.

Save these instructions and if moved or sold make sure

that they remain with the appliance, so that everyone

using it through its life will be properly informed on the

appliance’s use and safety.

To safeguard life and property keep the precautions listed

in the user instructions handy as the manufacturer is not

responsible for damages caused by omission.

Children and vulnerable people safety

• This appliance can be used by children ages 8 years

and above and persons with reduced physical, sensory,

or mental capabilities, or lack of experience and know-

ledge if they are supervised or have received instruc-

tions on the safe use of the appliance and understand

the hazards involved.

• Children ages 3 to 8 are allowed to load and unload this

appliance.

• Children should be supervised to ensure that they do

not play with the appliance.

• Cleaning and user maintenance is not to be performed

by children unless they are aged 8 years and above and

supervised.

• Keep all packaging well away from children. There is

risk of suffocation.

Safety information

2

• If you are discarding the appliance, pull the plug out of

the socket, cut the connection cable (as close to the

appliance as possible) and remove the door to prevent

children from possible electric shock or locking

themselves inside it.

• If this appliance, which features magnetic door seals, is

to replace an older appliance with a spring lock (latch)

on the door or lid, be sure to disassemble the spring lock

before you discard the old appliance. This will prevent it

from becoming a death hazard for children.

General safety

WARNING!

Keep ventilation openings in the appliance

enclos

ure or in the built-in structure clear of obstruction.

WARNING! Do not use mechanical devices or other

means to accelerate the defrosting process, other than

those recommended by the manufacturer.

WARNING!

Do not damage the refrigerant circuit.

WARNING! Do not use other electrical appliances

(such as ice cream m

akers) inside the refrigerating

appliance unless approved by the manufacture

r.

WARNING!

Do not touch the light bulb if it has been

on for a long period of time because it could be very

hot.

1)

1) If there is a light in the compartment.

Safety information

3

WARNING! w

hen positioning the appliance, ensure

the supply cord is not trapped or damaged.

WARNING! Do not place multiple portable socket-

outlets or portable power suppliers at the rear of

the

appliance.

• Do not store explosive substances such as aerosol cans

with a flammable propellant in this appliance.

• The refrigerant isobutane (R-600a) is contained inside

the refrigerant circuit of the appliance. It is a natural gas

with a high level of environmental compatibility, which is

nevertheless flammable.

• During transportation and installation of the appliance,

ensure that none of the components of the refrigerant

circuit are damaged.

- avoid open flames and sources of ignition

- thoroughly ventilate the room in which the appliance is

situated

• It is dangerous to alter the specifications or modify this

product in any way. Any damage to the cord may cause

a short circuit, fire and/or electric shock.

• This appliance is intended to be used in households or

similar applications such as

- staff kitchen areas in shops, offices and other working

environments;

- farm houses and by clients in hotels, motels and other

residential type environments;

- bed and breakfast type environments;

- catering and similar non-retail applications.

Safety information

4

WARNING! Any electrical components (plug, power

cord, compressor etc.) must be replaced by a certified

service agent or qualified service personnel.

WARNING! The light bulb supplied with this appliance

is a “special use

light bulb” to be used

only with the

appliance supplied. This

“special use light bulb

” is not

suitable for domestic lighting.

1)

• The power cord must not be lengthened.

• Make sure that the power plug is loose and that it is not

damaged by the rear of the appliance. A trapped or

damaged power plug may overheat and cause a fire.

• Make sure that you can access the mains plug of the

appliance.

• Do not pull the mains cable.

• If the power plug socket is loose, do not insert the power

plug. There is a risk of electric shock or fire.

• You must not operate the appliance without the light bulb.

• This appliance is heavy. Care should be taken when

moving it.

• Do not remove or touch items from the freezer com-

partment if your hands are damp/wet, as this could

cause skin abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appliance to direct

sunlight.

Daily use

• Do not heat the plastic parts of the appliance.

• Do not place food products directly against the rear wall.

1) If there is a light in the compartment.

Safety information

5

• Frozen food must not be re-frozen once it has been

thawed.1)

• Store pre-packed frozen food items in accordance with

the frozen food manufacturer’s instructions.1)

• Appliance manufacture and storage recommendations

should be strictly adhered to. Refer to relevant

instructions.

• Do not place carbonated of fizzy drinks in the freezer

compartment as this creates pressure inside the

container, which may cause it to explode, resulting in

damage to the appliance.1)

• Ice lollies can cause frost burns if consumed straight

from the appliance.1)

• To avoid contamination of food, please respect the

following instructions.

• Opening the door for long periods can cause a

significant increase in temperature in the compartments

of the appliance.

• Regularly clean surfaces that may come in contact with

food items and accessible drainage systems.

• Clean water tanks if they have not been used for 48h;

flush the water system connected to a water supply if

water has not been drawn for 5 days.

• Store raw meat and fish in suitable containers in the

refrigerator, so that they do not come in contact with, or

drip onto other food items.

• Two-star frozen-food compartments (if they are sold

with the appliance) are suitable for storing pre-frozen food

items, storing, or making ice-cream and making ice cubes.

1) If there is a freezer compartment.

2) If there is a fresh-food storage compartment.

Safety information

6

• One-, two- and three-star compartments (if they are sold

with the appliance) are not suitable for freezing fresh

food items.

• If the appliance is left empty for long periods, switch off,

defrost, clean, dry and leave the door open to prevent

mould from developing inside the appliance.

Care and cleaning

• Before maintenance, switch off the appliance and

disconnect the mains plug from the mains socket.

• Do not clean the appliance with metal objects.

• Do not use sharp objects to remove frost from the

appliance. Use a plastic scraper instead.1)

• Regularly examine the drain in the refrigerator for

defrosted water. If necessary, clean the drain.

If the drain is blocked, water will collect at the bottom of

the appliance.2)

Installation

Important! For electrical connections carefully follow

the instructions given in specific paragraphs.

• Unpack the appliance and check for any damages. Do

not connect the appliance if it is damaged. Report

possible damages immediately to the point of purchase.

In this case do not discard the packaging.

• It is advisable to wait at least four hours before

connecting the appliance to allow the oil to flow back to

the compressor.

1) If there is a freezer compartment.

2) If there is a fresh-food storage compartment.

Safety information

7

• The appliance’s surroundings will need to have suitable

air circulation, otherwise overheating may occur. For

sufficient ventilation, follow the installation instructions.

• Wherever possible the spacers of the product should be

positioned against a wall to prevent touching or grabbing

warm parts (compressor, condenser) and possible burns.

• The appliance must not be located close to radiators or

cookers.

• Make sure that the mains plug is accessible after the

installation of the appliance.

Service

• Any electrical work required to service the appliance

should be carried out by a qualified electrician or

competent person.

• This product must be serviced by an authorised Service

Centre, and only genuine spare parts must be used.

Energy saving

• Don’t put hot food in the appliance.

• Don’t place packed food items together as this prevents

air from circulating.

• Make sure food items don’t touch the back of the

compartment(s).

• If the electricity switches off, don’t open the door(s).

• Don’t open the door(s) frequently.

• Don’t keep the door(s) open for a long time.

• Don’t set the thermostat on excessively cold tempe-

ratures.

• All accessories, such as drawers, shelves and balconies,

should be kept in place for lower energy consumption.

Safety information

8

Environmental Protection

This appliance does not contain gasses in its refri-

gerant circuit or insulation materials which could damage

the ozone layer. The appliance must not be discarded

together with household refuse or rubbish. The insulation

foam contains flammable gases, and the appliance must

be disposed of according to the appliance’s regulations

and collected from your local authority. Avoid damaging

the cooling unit, especially the heat exchanger.

Materials on this appliance marked by the symbol are

recyclable.

This symbol on the product or its packaging indicates

that th

e product must

not be treated as household

waste. Instead

, it should be

taken to the appropriate

collection point for recycling electrical

or

electronic

equipment.

By ensuring this product is disposed of correctly, you will

help prevent potential negative consequences to the

environment and human health, which could otherwise be

caused by the inappropriate waste handling of this product.

For more detailed information on how to recycle this

product, please contact your local council, household

waste disposal service or point of purchase.

Packaging materials

Materials with the symbol are recyclable.

Dispose the packaging in a suitable recycling collection

bin.

Safety information

9

Disposal of the appliance

1. Disconnect the mains plug from the mains socket.

2. Cut off the mains cable and discard it.

WARNING!

During use, servicing or

disposal

of

the appliance, please pay attention to

similar yellow

or orange colour

symbols, displayed at the

rear of

the

appliance (rear panel or compressor).

This is

a risk of fire warning symbol. There are flam

-

mable materials in refrigerant pipes and com-

pressor

s.

Please

keep away from fire sources during use

,

servicing or disposal.

Overview

10

Note: The above picture is for reference purposes only. The actual appliance may be different.

The most energy-saving configuration requires drawers, food boxes and shelves to be positioned

inside the product. Please see the picture above.

Thermostat and Light

Fridge

Shelves

Water Tank

Crisper Cover

Fridge

Balconies

Crisper

Freezer

Shelves

Freezer

Drawers

Leveling Feet

Overview

11

Note: The above picture is for reference purposes only. The actual appliance may be different.

The most energy-saving configuration requires drawers, food boxes and shelves to be positioned inside the

product. Please see the picture above.

Thermostat and Light

LED Light

Fridge

Balconies

Fridge

Shelves

Crisper Cover

Crisper

Freezer

Shelves

Leveling Feet

Freezer

Drawers

Installation

12

Space Requirement

 Select a location without direct exposure to sunlight.

 Select a location with enough space for the refrigerator doors to open easily.

 Select a location with level (or nearly level) flooring.

 Allow sufficient space to install the refrigerator on a flat surface.

 Allow a clearance to the right, left, back and top when installing. This will help reduce power

consumption and reduce your energy bills.

 Keep a 50mm clearance by the two sides and rear.

Positioning

Install this appliance in a location where the ambient temperature corresponds to the climate class

indicated on the rating plate of the appliance. For refrigerating appliances with climate class:

- extended temperate: this refrigerating appliance is intended to be used at ambient temperatures

ranging from 10 °C to 32 °C;(SN)

- temperate: this refrigerating appliance is intended to be used at ambient temperatures ranging

from 16 °C to 32 °C;(N)

- subtropical: this refrigerating appliance is intended to be used at ambient temperatures ranging

from 16 °C to 38 °C;(ST)

- tropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from

16 °C to 43 °C;(T)

Location

The appliance should be installed well away from sources of heat such as radiators, boilers, direct

sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best

performance, if the appliance is positioned below an overhanging wall unit, the minimum distance

between the top of the cabinet and the wall unit must be at least 50 mm. Ideally, however, the

appliance should not be positioned below overhanging wall units. Accurate leveling is ensured by

one or more adjustable feet at the base of the cabinet.

This refrigerating appliance is not intended to be used as a built-in appliance.

Warning! It must be possible to disconnect the appliance from the mains power

supply; the plug must therefore be easily accessible after installation.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to

your domestic power supply. The appliance must be earthed. The power supply cable plug is

provided with a contact for this purpose. If the domestic power supply socket is not earthed,

connect the appliance to a separate earth in compliance with current regulations, and consult a

qualified electrician. The manufacturer declines all responsibility if the above safety precautions

are not observed. This appliance complies with EEC Directives.

Installation

13

Door Reversibility

Before reversing the door, please have available the following tools and materials: straight screwdriver, cross screwdriver,

spanner and the components included in the poly bag:

Left Door Hinge Cover x 1

Left Aid-Closer on Upper Door x 1

Left Aid-Closer on Lower Door x 1

1. Unscrew the top hinge cover and then unscrew the top hinge.

Then lift the upper door and place it on a soft pad to avoid scratches and damages.

2. Remove the top left screw cover.

Installation

14

3. Remove the upper door, use a cross screwdriver to remove the screw, then remove the lower door.

4. Laying the refrigerator flat on the ground, remove the adjusting feet as shown in the picture below, then with a cross

screwdriver to remove the lower hinge.

5. Fit the hinge core position of the lower hinge and upper hinge, opposite sides together.

6. Install the lower hinge under the refrigerator, screw in the adjusting feet, and ensure a horizontal position.

Installation

15

7. Detach the Fridge and Freezer door gaskets and then attach them after rotating.

8. Install the lower door, adjust and fasten the middle hinge onto the cabinet.

9. Put back the door. Ensure the door is aligned horizontally and vertically so that the seal is closed on all sides before

finally tightening the top hinge. Then insert the top hinge, screw it to the top of the unit and fasten the hinge cover

(in accessary bag) with a screw.

10. Fasten the screw cover.

Installation

16

Water Dispenser (If water dispenser is sold with the appliance)

Before using the water dispenser for the first time, remove and clean the water

tank located inside the refrigeration compartment.

1. Lift and remove the tank balcony.

2. Remove the water tank. Detach the top cover and wash and wipe dry both the tank

and the cover.

3. After cleaning, put back the water tank, cover and tank balcony as shown below.

4. Clean the dispenser lever located outside the refrigerator door.

Filling the water tank

1.

Open the small lid over the tank balcony.

2.

Fill the water tank with drinkable water up to the 2.5L line.

3. Close the lid. Ensure it is firmly shut.

Dispensing water

Push the dispenser lever gently with a glass or container. To

stop the flow, pull the glass away from the lever.

Installation

17

Install door external handle (if external handle is sold with the appliance)

Space Requirement

 Keep enough space to be able to open the door.

 Keep at least a 50mm clearance by the two sides and rear.

A

550

B

585

C

1800

D min=50

E

min=50

F

min=50

G

1100

H 1135

I

135°

Leveling the unit

To do this adjust the two leveling feet

to the front of the unit.

If the unit is not level, the doors and magnetic seal

alignments will not be properly protected.

Lengthen

Shorten

User interface

18

1. Temperature setting of the Fridge Compartment

Fridge temperature setting Panel

1.1 Operation button

Set button

Press this button once to select the running temperature.

Keep pressing this button for 3s to select the Super mode.

1.2 Indicators

1) Super mode indicator: the light is on when Super mode is selected.

2) Setting the temperature indicators of the fridge compartment. The lit indicator means the desired temperature is

selected.

1.3 Super mode

Activate super mode:

Keep pressing the button for 3s, the super mode will be activated, and indicator will switched on.

When super mode is activated, the fridge temperature will remain on its previous setting and cannot be changed

by pressing the button.

Exit from Super mode

 Press Set button (A) for over 3 seconds

 Or the appliance will automatically return to its original setting when Super mode has been running for more than

50 hours.

2. Temperature setting of the Freezer Compartment

The freezer temperature setting slider

FREEZER CONTROL

User interface

19

• This slider in the fridge compartment is used to adjust the temperature of the freezer compartment.

• When the slider is set to , the temperature in the freezer compartment will be higher. On the contrary, the

temperature in the freezer compartment will be lower if the slider is set to .

• The middle position is recommended for standard use.

• To obtain the lowest temperature in the freezer compartment, you can adjust the setting knob to coldest and set

the slider to .

3. Temperature setting recommendation

Temperature setting recommendation

Environment

Temperature Fridge Compartment Freezer Compartment

Warm

Set to

Normal

Set to

Cold

Set to

• The information above gives users recommendations for temperature settings.

• In winter or when temperatures reach 16°C, users should avoid setting to and cold.

• For energy saving, the and coldest setting apply only for special conditions (such as quick-freezing or ice

making), and after use return to original setting.

Pagina se încarcă ...

Candy 34005134 Manual de utilizare

Candy 34005134 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente