Akai CT-2108APF Manual de utilizare

Marca: Akai

Model: CT-2108APF

Categorie: Televizoare CRT

Tip: Manual de utilizare

Please read this manual carefully before operation.

COLOR TELEVISION

RECEIVER

OPERATION MANUAL

CT-2108APF

AKAI - JAPAN

BEFORE OPERATION

Dear Customer:

Congratulations! You have purchased one of the finest Color TV's on the market!

This manual will help you use many exciting and useful features to make your TV viewing more enjoyable than

ever before.

Before operating your TV set, please read all these safety and operating instructions completely and then retain

for future reference.

Customer's Record

You will find the model number and chassis number on the back of your TV set.

Record these numbers in the spaces provided below.

Refer to them whenever you call upon your dealer regarding this product.

Model Number: Chassis Number:________________

Safety Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTIONS:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD

RECEPTACLE OR OTHER OUTLET UNLESS THE PRONGS CAN BE FULLY INSERTED INTO THE OUTLET

TO PREVENT ANY EXPOSURE OF THE PRONGS ON THE POLARIZED PLUG.

Avoid displaying stationary images on your TV screen for extended periods of time. Stationary patterns

generated by computer displays, video games, stock market reports, etc .can become permanently engrained

on the picture tube. This damage is not protected by your warranty as it is the result of misuse. Should you

wish to use your Television to display still images, it is always advisable to reduce brightness and contrast

settings. Never leave a video game or computer display unattended.

NOTE TO CABLE INSTALLER:

The cable ground shall be connected to the grounding system of the building, as close to the point of cable entry

as practical.

Important Safety instructions

CAUTION

PLEASE READ THESE INSTRUCTIONS, KEEP THESE INSTRUCTIONS AND HEED ALL WARNINGS.

FOLLOW ALL INSTRUCTIONS.

Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to

assure your personal safety. However improper use can result in potential electrical shock or fire hazards. In

order not to defeat the safe guards incorporated in this TV set, observe the following basic rules for antenna/TV

installation, use and servicing. All operating and use instructions should be followed.

Do not remove the cabinet cover. This may expose you to dangerous voltages. Refer all servicing to

qualified service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

The lightning symbol in the triangle tells

you that the voltage inside this product

may be strong enough to cause an electric

shock. DO NOT TRY TO SERVICE OR

CHANGE THIS PRODUCT YOURSELF.

The exclamation point in the triangle tells

you that important operating and mainte-

nance instructions follow this symbol.

Mains plug is used as disconnect device and it shall remain readily operable.

BEFORE OPERATION

Power Sources-The TV set should be operated only from the type of power source indicated on the TV set or

as indicated in the Operation Manual. If you are not sure of the type of power supply in your home, consult your

sales person or your local power company. For TV sets designed to operate from battery power, or other

sources, refer to the operating instructions.

Grounding or Polarization - Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third

grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

Alternate Warnings-This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are

unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat

the safety purpose of the grounding plug.

Water and Moisture Warnings-Do not use the TV set near water-for example, near a bath tub, wash bowl,

kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. The TV set shall not be

exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV set.

Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the

TV set and to protect it from overheating, and these openings must not be blocked or covered. The openings

should never be blocked by placing the TV set on a bed, sofa, rug, or other similar surface. This TV set should

not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

Heat - Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

Power-Cord Protection-Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Accessories-Do not place the TV set on an unstable cart, stand, tripod, bracket, or table. The TV set may fall,

causing serious injury to a child or adult, and serious damage to the TV set. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or accessory recommended by the manufacturer, or sold

with the TV set, and should use a mounting accessory recommended by the manufacturer.

A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces

may cause the TV set and cart combination to overturn.

Overloading- Do not overload wall outlets, extension cords or integral convenience receptacles as this can

result in fire or electric shock.

Lightning-For added protection for this TV set during a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will

prevent damage to the product due to lightning and power-line surges.

Object and Liquid Entry-Never push objects of any kind into the TV set through openings as they may touch

dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any

kind on the TV set.

Precautions (continued)

Cleaning-Unplug the TV set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or

aerosol cleaners. Use a dry cloth for cleaning the exterior of the TV set.

BEFORE OPERATION (continued)

Precautions (continued)

Attachments-Do not use attachments not recommended by the product manufacturer as they may cause

hazards or electric shock.

If a snapping or popping sound from a TV set is heard continuously or frequently while the TV set is operated,

unplug the TV set and consult your dealer or service technician. It is normal for some TV sets to make

occasional snapping or popping sounds, particularly when being turned on or off.

Damage Requiring Service-Unplug the TV set from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. If the power cord or plug is damaged or frayed.

b. If liquid has been spilled or objects have fallen into the TV set.

c. If the TV set has been exposed to rain or water.

d. If the TV set has been subject to excessive shock by being dropped, or the cabinet has been damaged.

e. If the TV set does not operate normally by following the operating instructions. Adjust only those controls that

are covered by the operating instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to restore the TV set to its nor

mal operation.

f. When the TV set exhibits a distinct change in performance-this indicates a need for service.

Warning: This unit should only be serviced by an authorized and properly trained technician. Opening the cover

or other attempts by the user to service this unit may result in serious injury or death from electrical shock, and

may increase the risk of fire.

Servicing-Do not attempt to service the TV set yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Replacement Parts-When replacement parts are required, be sure the service technician has used replacement

parts specified by the manufacturer or have the same characteristics as the original parts. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

Safety Check-Upon completion of any service or repairs to the TV set, ask the service technician to perform

routine safety checks to determine that the TV set is in proper operating condition.

When the TV set reaches the end of its useful life, improper disposal could result in a picture tube implosion.

Ask a qualified service technician to dispose of the TV set.

ANTENNA

Outdoor Antenna Grounding-if an outdoor antenna is installed, follow the precautions below. An outdoor antenna

system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or

where it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO

KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST

INVARIABLY FATAL

Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up

static charges.

This symbol indicates that this product incorporates double insulation between Hazardous mains

voltage and user accessible parts. When servicing use only Identical replacement parts.

III

CONTENTS

INTRODUCTION

Remote Control Keys .................................................................................................................................1

INSTALLATION

To Connect the Antenna ............................................................................................................................2

Installing the Remote Control Batteries .....................................................................................................2

To Connect External Equipment ................................................................................................................ 3

GENERAL OPERATION

Power On/Off .............................................................................................................................................4

MENUS OPERATION

Menus ........................................................................................................................................................5

Tune Menu .................................................................................................................................................5

Picture Menu ..............................................................................................................................................7

Sound Menu ...............................................................................................................................................7

Setup Menu ................................................................................................................................................8

Timer Menu ................................................................................................................................................9

TELETEXT OPERATION .......................................................................................................10

TROUBLESHOOTING GUIDE ..............................................................................................10

Note:

1、Designs are subject to change without notice.

2、All the pictures used in this operation manual are just used for reference, and may be different with

practicality.

INTRODUCTION

Remote Control Keys

Notes:

1：When in operation, please point your remote control directly to the infrared sensor.

2：Do not expose the remote control to impacts, water or disassemble it.

3：The function buttons which marked with * may not be available due to the chassis functions.

DISP

TEXT

INDEX

REVEAL

SIZE

EAST WEST/

MIX

CANCEL

HOLD

SUBCODE

DIGIT

SLEEP

ZOOM

PMODE.

SMODE.

SOUND

PICTURE

TIMER

TUNE

SETUP

SCAN

STANDBY

MUTE

TV/AV SELECT

SLEEP TIMER

CHANNEL AUTO SCAN

DIRECT SELECT

DIGIT SELECT

ON-SCREEN DISPLAY

RECALL

MENU SELECT

VOLUME UP

VOLUME DOWN

SETUP MENU

CHANNEL UP

CHANNEL DOWN

PICTURE MODE SELECT

*ZOOM SWITCH

FASTMENU SELECT IN TV MODE

*SOUND MODE SELECT

*TELETEXT FUNCTIONS

(OPTIONAL)

*TELETEXT FUNCTIONS

(OPTIONAL)

INSTALLATION

Please read the safety instructions in this manual completely before installation.

Install your TV in an area where direct sunlight will not fall upon the screen.

Soft, indirect light is best for television viewing.

Allow enough space (at least 4 in.) between the TV and any walls or enclosures for proper ventilation.

Optimum television viewing distance is 3-5 times the screen's size.

Auto-Degaussing

Color television can be easily affected by magnetism, which shows as color distortion on the screen. If your

TV is affected by nearby magnetic components or appliances, turn it off for a few minutes. The built-in

auto-degaussing circuit will eliminate the magnetic interference.

To Connect the Antenna

VHF

UHF

or Cable

VHF

UHF

75-ohm coaxial cable (not supplied)

300-ohm twin-lead cable (not supplied)

Antenna adapter

(not supplied)

RF Input

(back of TV unit)

Notes:

1. It is recommended that a 75 ohm coaxial cable be used in order to eliminate interference and noise

which may occur due to nearby radio transmissions.

2. The antenna cable should not be tied together with other wiring.

3. Set up a lightning rod and check it regularly when an outdoor antenna is used.

Installing the Remote Control Batteries

1. Remove the battery compartment lid.

2. Insert two AAA batteries (included). Make sure the positive (+) and negative (-) polarities are correctly

aligned.

3. Reattach the battery lid.

Notes:

1. Alkaline batteries are recommended for longer life.

2. Always replace both batteries at the same time.

3. Do not expose batteries to fire or break them open.

4. To avoid battery leakage, remove batteries from the remote control when it is not being used for a long

period of time.

U/V mixer

(not supplied)

AV terminals on the side panel can not be used together with the SCART terminal on the rear panel

at the same time.

Please turn off the power supply of the TV set and the external equipment before connection.

2. The side terminals may be easier to use with a camcorder.

VCR

AUDIO/VIDEO IN

DVD Player

SCART Cable

Coaxial Cable

ANTENNA IN

Video Cable

Audio Cable

SCART Cable

AV IN on the side panel

SCART terminal

Camcorder

SCART terminal

VCR

AUDIO/VIDEO IN

VCR

INSTALLATION (continued)

To Connect External Equipment

The followings are diagrams showing basic instructions for attaching external equipment, like a VCR or DVD

player, to your TV set. Please refer to operation manuals of external audio/video equipment that will be

connected to your set for additional instructions. PLEASE TURN OFF ALL POWER BEFORE CONNECTING

DEVICES TOGETHER.

Notes:

Connect VCR s RF OUT terminal to the RF IN jack I cated on the rear'oConnect VCR s RF OUT terminal to the RF IN jack I cated on the rear'o

VIDEO

AUDIO

AV IN

RF IN

GENERAL OPERATION

1、POWER[On/Off]

Plug in the supply socket, and press the MAIN POWER SWITCH key on the TV. You may press any of the

STANDBY, Program Number (0-9) and CH-/+ keys on the remote control to turn on the TV.

To switch back to the Standby mode, press STANDBY key. You can also power off the TV directly by pressing

the MAIN POWER SWITCH key. Part of circuit on the TV remains active in the STANDBY mode. To cut off the

power off completely, please press the MAIN POWER SWITCH.

Auto off without signal received

When there is no signal received (for example, the program of a certain channel is over), the TV will switch to the

Standby mode if no key is pressed within 5 minutes. If you have set "Off Time" and the remaining time is less

than 5 minutes, Off Time will be carried out prior to AUTO OFF. At the last 5 minutes, it will hint per-min; and at

the last 1 minute, it will hint per-sec on the screen.

2、Num Keys

a. To select channels；

b. Press any number button to reset TV when it is standby,and the TV will turn to the right channel as the

number.

c. Press the number button to change AV mode to TV mode.

d. Input the page of sub code in txt mode.

e. Input the channel frequency in tune menu.

f. Input the password of the Hotel mode.

3、[CH+/-]&[VOL+/-]

Press CH[+/-] to switch channels; Press the VOL-or VOL+ button to decrease or increase the volume. Adjustable

range: 0-63

During normal play, press the MUTE button and the sound is eliminated. The TV will display a picture

on the

screen. To cancel MUTE, you may press the MUTE button again or the VOL+ button.

4、TV/AV Selection

In the TV mode, press the TV/AV button to enter the AV mode. In the AV mode, the TV receives AV signals from

external equipment. To resume broadcast viewing, press the TV/AV button，CH-/CH+ buttons or Num keys.

To receive signals from external equipment, please select the relevant AV mode. In the hotel mode, if “AV lock” is

ON, there will be “locked” displayed on the screen when switch to AV mode.

5、Channel Selection[-/--/---]

Pressing the CH-/CH+ buttons can select another lower-numbered or upper-numbered channel.

Direct selection：

To select a one-digit channel number

Press the DIGIT button to choose "-" firstly, then press one of 0-9 buttons.

To select a two-digit channel number

Press the DIGIT button to choose "--" firstly, then enter a first-digit and second-digit. If only one digit is entered,

the channel will automatically shift to the digit related channel in three seconds.

To select a three-digit channel number

Press the DIGIT button to choose "---" firstly, then enter a first-digit, second-digit and third-digit. If only one or two

digits are entered, the channel will automatically shift to the digit (digits) related channel in three seconds.

Note: If you enter a number over 235, the channel will remain the current one.

6、MUTE

Press the MUTE button to switch MUTE ON/OFF modes. The “MUTE ON” mode will display on the screen.

When there is no signal received in TV mode,the TV will be in MUTE ON mode.and there will be no sound output.

7、PICTURE MODE

There are 4 picture modes to select. Press this button to switch userÎ soft Înature Îrich.

And the user mode can be regulated in the PICTURE MENU.

8、DISPLAY

The displayed parts include the Signal Source; Color Sys;Sound Sys and so on.

9、MENU

Press the MENU key and the main menu will display on the screen.To stop searching,you can press the MENU

key.

10、RECALL

Press the RECALL button and the TV will directly skip back to the former program channel.

11、SLEEP

This button is used to set fast off time, the adjustale range is 0,5,10,15,………120,0 minutes,press this button

repeatly,and you can select what time you want to set.

12、SCAN

Press the SCAN button to scan programs from the current channel. To stop scanning and start the corresponding

operation, please press SCAN button again or any other buttons.

*13、ZOOM（If the button does not function, it means this TV does not support this function.）

Press the zoom button ,and the TV will switch between 4：3, 16：9 and zoom.

*14、SOUND MODE（If the button does not function, it means this TV does not support this function.）

There are 4 sound modes to select such as userÎnews Îmusic Îtheatre.

And the user mode can be regulated in the SOUND MENU.

MENUS OPERATION

Menus

Press the MENU button when watching TV programs, Press buttons to select and press buttons

to enter, then press the

buttons to adjust.

Menu display disappears 15 seconds after last selection.

Note: In the AV mode, TUNE menu is not available.

Tune Menu

This section gives descriptions about adjustment of items in the TUNE menu. This menu will display

Channel/Colour Sys/Sound Sys/Skip/Frequency/Fine Tune/Auto Search and Swap.

1. Channel

Press buttons to change the channels one by one.

2. Colour Sys

Press buttons to choose the Colour Sys, It is very important to set the correct colour system,suggest

to set it “Auto”.

3. Sound Sys

Press buttons to choose the Sound Sys.It is very important to set the correct sound system,otherwise

much boring noise will be heard.

4. Skip On/Off

After Auto Search, there may be some repeated program or inferior signals received. Skipping the undesired

program position can dramatically quicken channel selection.

After selecting "Skip" in the TUNE menu, press the

buttons to set "Skip On". When the TUNE menu

has disappeared, press the CH-/CH+ buttons and you will find the channel number skipped.

Channel 9

Colour Sys Auto

Sound Sys DK

Skip Off

Frequencyy 066 75MHZ.066 75MHZ.

Fine

TuneFine Tune

Auto

SearchAuto Search

Swap

TUNE

SELECT ADJUST

5. Search

In case the desired channel cannot be preset with the Auto Program function, or you would like to set the

desired channels to specific channel numbers, please use the Search function.

After selecting "Frequency" in the TUNE menu, press the

buttons. The TV searches another

lower/upper channel. To stop search, press the MENU button. You can also select the channel frequency

directly by using the Num buttons.

If the selected channel is not the one you want, press the buttons again until the desired channel is selected. If

the TV does not stop searching when finding a channel, please use the Fine Tune function.

6. Frequency Fine-tuning

After selecting "Fine Tune" in the TUNE menu, press the buttons until you get the best sound and

picture effect. Press the DISP button to check up the fine-tuned channel, and you will find that the position

number turns to yellow.

7. Auto Search

Before performing Auto Search, please affirm that the Sound System is correct. After selecting "Auto Search"

in the TUNE menu, press the

button. The TV will search automatically in sequence. After auto searching,

the TV will store receivable channels and returns to POS1.

Unused position number is automatically set to Skip On. During Auto Search, press the MENU button

to stop searching.

8. Swap

Use the SWAP function to resort program position. For example, you want to change Channel 9 to Channel 7.

a. Press the TUNE menu button to select the SWAP menu in the TV mode.

b. Press the

buttons to highlight "Channel A". Press the Numeric buttons to set it to 9. Then set channel B to

7 in the way mentioned above.

c. Select the SWAP menu, and press the

button. The current channel No. is changed to Channel 7 and the

content of Channel 7 is exchanged with that of Channel 9.

The current channel No. is Channel 7.

Repeat the operations mentioned above to sort other searched channel position as desired.

VHF H-VHF H- Channel 11

67 75MHz

.67 75MHz.

DOWN: DOWN

：UP：UP

Auto Search

VHF H-VHF H- Channel 11

67 75MHz.67 75MHz.

MENU Stop:MENU Stop:

Channel AChannel A 99

Swap

SELECT ADJUST

Channel BChannel B

Picture Menu

1. Picture Mode Selection

Before shipment, the TV was given three preset picture modes: Soft, Nature and Rich. Press the

P. MODE button to select one of the three preset modes or the User mode.

Refer to the following table about each picture mode.

Mode Picture Quality

Soft

The contrast is low, suitable for watching TV in mild surrounding light.

Nature

Standard status, suitable for watching ordinary programs.

Rich The contrast is high, suitable for watching TV in bright environment.

User Picture quality user sets

available for NTSC DVD discs.

2. To adjust picture quality

To perform the following operation, press the MENU button or the picture menu button directly to select the

PICTURE menu. Press the

buttons to choose and Press the buttons to adjust the digital level of

the selected adjustment as desired.

The adjusted picture level is automatically stored in the User position.

Sound Menu

On the Sound Menu mode ,press the

buttons to choose the parts you want to change，then press the

buttons to change.

NOTE: If there is no BASS、TREBLE or LOUDNESS selection on the menu, it means this TV does

not support those functions.

Note : There is no Tint function under PAL or SECAM system for some chassis.

The adjustable “Tint” range is –31-+31, 0” is the normal value. Under DVD mode, "Tint" function is not

“

”

Contrast 32

Brightness

PICTURE

SELECT ADJUST

Color

Sharpness

Tint

Skin

ToneSkin Tone

Off

Volume 32

Treble

SOUND

SELECT ADJUST

Bass

Loudness

Setup Menu

To perform the following operation, press the MENU button or the SETUP button directly to select the SETUP

menu.

NOTE： If there is no AVL or DEGAUSS selection on the menu, it means this TV does not support those

functions.

1. Language

Press buttons to select languages.

2. Blue Background

With this function on, the screen will display a mild blue background and mute automatically in TV mode

when no signal is received.

3. Picture Improve

It is recommended to select "picture improve on" to acquire better picture effect.

4. Color temperature adjustment

You may select one of color of background as preferred among normal, Cool and Warm mode. The

adjusted Color Temp mode is automatically stored and remains unchanged until next adjustment.

5. Child lock

The keyboard will be locked when Child lock is “ON”, and it will be cancelled by keeping on pressing the

MENU（on the keyboard）button for 10 seconds.

If the Child Lock is ON under standby mode, you can turn on the TV by pressing the menu button on the

TV set for 10 seconds. The Child Lock will remain “ON” after TV turned on.

6. Hotel mode

Only after entering the correct password by pressing Numeric buttons, you can adjust the following items.

Language English

Pic

ImprovePic Improve

SETUP

SELECT ADJUST

Blue ScreenBlue Screen

Color TempColor Temp

Normal

AVL Off

Hotel

modeHotel mode

Child LockChild Lock

Off

Degauss

Password - - - -----

LockAV Lock

Hotel mode

SELECT ADJUST

Tuning LockTuning Lock

Off

Max volume.Max volume.

New PasswordNew Password - - - -----

Clear

AllClear All

Channel LockChannel Lock

Off

(Each time you power on the TV or quit the menu, you need entering the password)

Initial password: 0000 (preset before outgoing)

Universal password: 8888

Tuning lock: To allow/prohibit program (searching program). With Channel Lock ON, the item is also set to

ON.

AV Lock: To prohibit watching AV program; there is a “locked” displayed on the screen.

Maximum Volume: To adjust volume to maximum.

New Password: Enter new password twice and you may change original password, “----”changes into green

means your new password has been set successfully.

Channel Lock: To lock current channel. Generally the Hotel TV does not allowed guests to change setting.

With Tuning Lock ON, the TUNE and SWAP menus are not available.

Clear All：All the lock setting will be cancelled except “AV Lock”.

To press the MENU button to return the up-menu.

Timer Menu

In the STANDBY or TURN ON mode, the TV can automatically complete some functions such as turn-on,

channel preset and turn-off as desired.

TIMER menu.

1. On/Off timer

Clock: You can enter the current exact time or relative time; Hour entering range is “00 to 23”.

Minute entering range is 00 to 59;

On time 1: one kind of on time. After on timer is performed, the on timer is cleared.

On channel 1: one kind of on channel, press

to select channel.

On time 2: the other kind of on time. After on timer is performed, the on timer is cleared.

On channel 2: another kind of on channel, press

to select channel.

Off timer: You can set the time of off time. After off timer is performed, the off timer is cleared.

You may preset two kinds of On Time and On Channels.

2. Sleep timer

After selecting "Sleep Time", press the buttons to set Sleep time to 5, 10, 15, 20……… 120 minutes or

Notes:

If both the SLEEP TIMER and OFF TIMER are set, the TV will perform the setting with less remaining time prior to

another. The SLEEP function is cancelled at the same time when the OFF TIMER is performed.

To perform the following operation, press the MENU button or the TIMER button directly to select the

Clockk0000:00 00:

Channel 1On Channel 1

TIMER

SELECT ADJUST

On Time 1On Time 1

: ----:--

Time 2On Time 2

: ----:--

Channel 2On Channel 2 00

Sleep

TimeSleep Time

Off

TimerOff Timer

: ----:--

TELETEXT OPERATION (selectable)

（If the following described buttons do not function, it means this TV does not support those functions）

The TV can receive various TELETEXT signals, including news, weather forecast and stock market quotation,

which is convenient for your operation.

1. TELETEXT on/off

Press the TEXT button firstly to enter the TEXT mode. Press the button again to quit from the TEXT mode

and resume broadcasting view.

2. Check up TELETEXT

1) Page selection Press the Numeric buttons to enter first-digit, second-digit and third-digit page No. in

turn. If a wrong number is entered, reenter the correct number after finishing the wrong numbers.

2) Press the

buttons to select the next or previous page.

3) Fast page selection

Every Color button on the remote control is corresponding to the same color page number appearing at the

bottom of the current screen. Press the Color buttons to select pages quickly as shown below:

Red button - To read the link page or next page

Green button - To read the link page or next second page

Yellow button - To read the link page or next third page

Blue button - To read the link page or previous page

4) Other functions

INDEX- To return to Index Page

REVEAL- To check up the concealed information on the current page

SIZE - To enlarge the current page size

EAST/WEST- To select the TELETEXT language

MIX- To turn on/off TELETEXT background

CANCEL - Note that when a newsflash or subtitle page arrives for the first time after being requested, or is

SUBCODE- To check the current page for appendix (To display "txt clock" when not in TXT mode)

TROUBLESHOOTING

Symptoms

Check the following items

Picture Sound

No picture No sound

1. Make sure the power cord is plugged in.

2. Check if the MAIN POWER SWITCH is pressed or not.

3. Check if the levels of Contrast, Brightness and Volume are set to

minimum.

Normal No sound

Check if the TV is in the MUTE mode or the volume is minimum.

Try pressing the VOL+ button.

Normal Check if the chroma is set to minimum.

No color

With noise

Check if the sound/color system is correct.

With stripes With noise

The TV set is interfered by electric waves from automobiles, motors,

neon lights, etc.

With snow With noise

1. Check if the antenna cable is broken or disconnected.

2. Check if the antenna direction has changed.

Ghost picture

Normal

Check if the antenna direction has changed.

Unclear picture

Normal or weak

Preset channels again.

With spots Normal

1. The TV is moved with power on.

2. Check if magnetic objects are put near the set.

The remote control doesn't work.

The batteries are exhausted or improperly installed.

pdated, Cancel display is automatically cancelled in favor of TEXT display

TELETEXT page display

HOLD - To still the current

CT-2108APF

MANUAL DE INSTRUCTIUNI

TELEVIZOR COLOR

Cititi acest Manual inainte de utilizarea aparatului.

AKAI - JAPAN

INAINTEA INSTALARII

Draga Utilizator:

Felicitari! Ai achizitionat unul dintre cele mai bune televizoare color existente pe piata!

Acest manual te va ajuta sa te bucuri de toate functiile acestui aparat facandu-ti privitul la televizor mult mai placut

decat a fost vreodata!

Inainte de a instala aparatul dvs. va rugam sa cititi cu atentie aceste instructiuni si sa le retineti pentru utilizarile

viitoare.

Precautii privind siguranta utilizarii:

ATENTIE: PENTRU A EVITA INCENDIUL SAU SOCUL ELECTRIC NU EXPUNETI ACEST APARAT

PLOAIE SAU IN ZONE CU UMEZEALA.

ATENTIE

RISC DE SOC ELECTRIC

NU DESCHIDETI

ATENTIE: PENTRU A REDUCE RISCUL DE SOC

ELECTRIC, NU DEMONTATI CAPACUL DIN SPATE AL

APARATULUI. ADRESATI-VA DOAR PERSONALULUI

CALIFICAT DE LA SERVICE-UL AUTORIZAT.

ATENTIE:

Simbolul fulgerului cu sageata incadrat intr-un

triunghi alerteaza utilizatorul asupra prezentei in

interiorul aparatului a unui voltaj ridicat care poate

fi de o magnitudine suficienta pentru a construi

un risc marit de electrocutare.

Semnul exclamarii incadrat intr-un triunghi,

avertizeaza utilizatorul de prezenta unui echipament

sensibil aflat in interiorul aparatului.

Alimentarea cu tensiune mai mare decat cea specificata sau taierea,innodarea sau/si prelungirea cablului de

alimentare pot duce la electrocutare sau incendiu.

Evitati expunerea pe ecran a unor imagini stationare pentru o peroiada de timp indelungata. Imagimile statice de

genul celor generate de display-ul calculatoarelor, jocuri video, etc. pot ramande impregnate permanent in tubul de

imagine. Aceasta defectiune nu este acoperita de garantie fiind rezultatul unei folosiri necorespunzatoare. Daca

totusi doriti sa expuneti imagini statice pe ecran, va sfatuim sa reduceti setarile de luminozitatea si contrast.

Atentionare privind cablul de alimentare:

Cablul de alimentare trebuie conectat la sistemul de impamantare al cadirii.

Instructiuni de siguranta:

ATENTIE

CITITI ACESTE INSTRUCTIUNI, PASTRATI ACESTE INSTRUCTIUNI, DATI ATENTIE ACESTOR

INSTRUCTIUNI, URMATI TOATE INSTRUCTIUNILE.

Acest aparat a fost produs pentru a va asigura siguranta folosirii. Cu toate acestea, o utilizare necorespunzatoare

poate duce la electrocutare sau incendiu.

Nu demontati capacul din spate al aparatului. Astfel riscati sa va expuneti uni voltaj foarte mare. Adresati-va doar

personalului calificat de la service-ul autorizat.

Asigurati-va ca stingeti televizorul inainte sa scoateti cablu de alimentare din priza.

INAINTEA INSTALARII

Precautii privind siguranta utilizarii: (continuare)

Sursa de alimentare – TV trebuie conectat doar la sursa de curent indicata pe aparat sau in maualul utilizare.

Daca nu sunteti sigur de sursa dvs. de alimentare adresati-va vanzatorului dvs. sau companiei de electricitate.

Impamantarea – nu ignorati importanta prizei cu impamantare. O priza cu impamantare are in plus doua lame de

metal necesare pentru siguranta dvs.

Priza – stecherul televizorului dvs se va potrivi doar unei prize cu impamantare. Aceasta este o masura pentru a

asigura siguranta dvs. Aveti grija sa nu conectati mai multe cabluri de alimentare in aceeasi priza unde conectati

TV, pentru a preveni aparitia focului sau a socurilor electrice.

Apa si umezeala - Nu amplasati aparatul in medii cu umezeala sau ploaie pentru a evita socurile electrice.

Ventilarea - Nu blocati orificiile de ventilatie ale aparatului. Ventilatia este necesara pentru a preveni defectarea

componentelor electrice.

Caldura - Aparatul trebuie amplasat departe de fereastra sau alte surse de caldura. Nu asezati televizorul

deasupra unei surse de caldura, cum ar fi un video player sau un Amplificator audio. Nu puneti pe aparat obiecte

care produc foc, cum ar fi o lampa aprinsa. Protejati televizorul de razele solare pentru a evita deteriorarea cranului.

Cablul de alimentare - Cablul electric trebuie pozitionat in asa fel incat sa nu fie strivit de talpa televizorului, acesta

putand fi perforat. Atunci cand televizorul CRT nu este folosit pentru o perioada mai lunga de timp, este recomandat

sa se deconecteze aparatul de la sursa de alimentare.

Pozitionarea - Nu pozitionati aparatul pe o suprafata instabila. Daca aparatul cade pot aparea leziuni seriose

persoanelor din preajma si aparatul se poate deteriora. Daca aparatul va fi amplasat intr-un loc stramt, distanta

minima dintre aparat si perete trebuie respectata. Supraincalzirea aparatului poate minimiza durata de functionare a

aparatului, si de asemenea poate fi periculos pentru dvs.

Furtuna - In timpul unei furtuni, pentru siguranta dvs. nu atingeti partile principale ale aparatului sau antena.

Obiectele si lichidele - Nu scapati sau impingeti obiecte in capacul din spate al aparatului sau in orificiul de

aerisire. Nu varsati nici un fel de lichid pe televizor. Nu introduceti nimic in orificiul de ventilatie al aparatului, daca

intra obiecte de metal sau ceva inflamabil exista riscul aparitiei focului. Nu puneti obiecte pe aparat, ecranul

televizorului poate fi afectat. Nu aruncati cu nimic in televizor. Sticla ecranului poate exploda si poate cauza leziuni

serioase persoanelor din preajma.

Manipularea - Mutati aparatul exact cum vi se recomanda, cu ajutorul a doua sau a mai multor persoane. Nu va

sprijiniti de aparat, nu va aplecati peste el sau sa nu impingeti aparatul cand sta in picioare. Atentie la copii. Daca

aparatul cade pot aparea leziuni serioase.

Curatarea - nu folositi dizolvanti, precum benzene, pentru a curata televizorul deoarece va afecta suprafata.

Scoateti aparatul din priza inainte de a curata ecranul. Praful se va sterge cu o laveta moale. Daca ecranul necesita

o curatare mai profunda folositi o laveta umeda. Nu folositi lichid sau spray de curatat.

INAINTEA INSTALARII

Precautii privind siguranta utilizarii:

(continuare)

Defecte pentru care trebuie sa va adresati service-ului – scoateti aparatul din priza si adresati-va service-ului

autorizat in una din urmtoarele situatii:

a.daca stecherul sau cablul de alimentare sunt avariate.

b.daca in interiorul aparatului a patruns orice lichid sau obiect.

c.daca aparatul a fost expus ploii.

d.daca televizorul a fost supus unor socuri puternice sau carcasa este Sparta.

e.daca aparatul nu functioneaza corect, in conformitate cu instructiunile de operare.

f. daca televizorul demonstreaza schimbari drastice de performanta.

Avertisment - asupra acestui acestui aparat trebuie sa intrevina doar persoane specializate si instruite ca atare.

Deschiderea capacului din spate sau alte intervenii asupra televizorului se pot solda cu rani grave sau cu

electrocutare si poate creste riscul de producere a incendiilor.

Inlocuirea pieselor – atunci cand este necesara schimbarea unor piese fiti sigur ca tehnicianul a utilizat aceleasi

piese cu cele originale sau cu piese ce au aceleasi caracteristici. Utilizarea pieselor neautorizate poate avea ca

efect socul electric sau incendiul.

Controlul de securitate – atunci cand asupra televizorului s-a intervenit, rugati tehnicianul sa va faca un control

de rutina pentru a va demonstra ca este in stare normala de functionare.

Acest simbol indica faptul ca acest aparat are dubla izolatie intre tensiunile periculoase.

III

INTRODUCERE

CUPRINS

TELECOMANDA..................................................................................................................................1

INSTALAREA

Conectarea

antenei…………………………………………........................................................................................2

Instalarea bateriilor in

telecomanda………………… ..............................................................................................................2

Conectarea echipamentelor

externe ...............................................................................................................................................3

OPERATII GENERALE

Pornirea si Oprirea

aparatului……………….......................................................................................................................4

MENIUL DE OPERARE

Meniul

principal………….................................................................................................................................5

Setarea programelor ……...................................................................................................................5

Meniul

Imagine...............................................................................................................................................7

Meniul Sunet.......................................................................................................................................7

Meniul Setari.......................................................................................................................................8

Meniul

Timp....................................................................................................................................................9

TELETEXT…………………………….................................................................................................

Ghid defecte…………………….........................................................................................................10

NOTA :

AKAI isi rezerva dreptul de a schimba design-ul si specificatiile fara notificare.

Pagina se încarcă ...