Asus PRIME B650M-R Manual de utilizare

Marca: Asus

Model: PRIME B650M-R

Categorie: Plăci de bază

Tip: Manual de utilizare

Acest manual este potrivit și pentru

PRIME B650M-R-CSM

Motherboard

PRIME B650M-R

E22817

First Edition

November 2023

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Safety information ...................................................................................................... iv

About this guide .......................................................................................................... v

Package contents ....................................................................................................... vi

PRIME B650M-R specications summary .............................................................. vii

Chapter 1: Product Introduction

1.1 Before you proceed ...................................................................................... 1-1

1.2 Motherboard layout ...................................................................................... 1-2

1.3 CPU installation ............................................................................................ 1-8

1.4 DIMM installation .......................................................................................... 1-9

Chapter 2: BIOS and RAID Support

2.1 Knowing UEFI BIOS ..................................................................................... 2-1

2.2 ASUS EZ Flash 3 ........................................................................................... 2-2

2.3 ASUS CrashFree BIOS 3 .............................................................................. 2-3

2.4 RAID congurations ..................................................................................... 2-4

Appendix

General Notices ....................................................................................................... A-1

Notices for non Wi-Fi model................................................................................... A-4

Warranty ................................................................................................................... A-6

ASUS contact information ...................................................................................... A-8

Service and Support ............................................................................................... A-8

Product Register ..................................................................................................... A-8

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the electrical

outlet before relocating the system.

• When adding or removing devices to or from the system, ensure that the power cables

for the devices are unplugged before the signal cables are connected. If possible,

disconnect all power cables from the existing system before you add a device.

• Before connecting or removing signal cables from the motherboard, ensure that all

power cables are unplugged.

• Seek professional assistance before using an adapter or extension cord. These

devices could interrupt the grounding circuit.

• Ensure that your power supply is set to the correct voltage in your area. If you are not

sure about the voltage of the electrical outlet you are using, contact your local power

company.

• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service

technician or your retailer.

Operation safety

• Before installing the motherboard and adding devices on it, carefully read all the

manuals that came with the package.

• Before using the product, ensure all cables are correctly connected and the power

cables are not damaged. If you detect any damage, contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from connectors,

slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in any area

where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualified service

technician or your retailer.

• Your motherboard should only be used in environments with ambient temperatures

between 10°C and 35°C.

Button/Coin Batteries Safety Information

WARNING

KEEP OUT OF REACH OF CHILDREN

Swallowing can lead to chemical burns,

perforation of soft tissue, and death. Severe

burns can occur within 2 hours of ingestion.

Seek medical attention immediately.

About this guide

This user guide contains the information you need when installing and configuring the

motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product Introduction

This chapter describes the features of the motherboard and includes descriptions for

each part of the motherboard.

• Chapter 2: BIOS and RAID Support

This chapter tells how to boot into the BIOS, upgrade BIOS using the EZ Flash Utility

and support on RAID.

Where to find more information

Refer to the following sources for additional information and for product and software

updates.

1. ASUS website

The ASUS website (www.asus.com) provides updated information on ASUS hardware

and software products.

2. Optional documentation

Your product package may include optional documentation, such as warranty flyers,

that may have been added by your dealer. These documents are not part of the

standard package.

3. Motherboard Installation Guide

Please visit https://www.asus.com/support for more information on the Motherboard

Installation Guide.

4. Driver and Utilities FAQ

Please visit https://www.asus.com/support for more information on downloading and

installing drivers and utilities for your motherboard.

Package contents

Check your motherboard package for the following items.

Motherboard 1 x PRIME B650M-R motherboard

Cables 2 x SATA 6Gb/s cables

Miscellaneous 1 x I/O Shield

2 x M.2 Anchors

Documentation 1 x Quick start guide

5. RAID Configuration Guide

Please visit https://www.asus.com/support for more information on the RAID

Configuration Guide.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used

throughout this user guide.

CAUTION: Information to prevent damage to the components and injuries to

yourself when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

• If any of the above items is damaged or missing, contact your retailer.

• Items not listed in the Package contents list above are purchased separately and do

not come bundled with your motherboard package.

6. BIOS FlashBack™ Feature

Please visit https://www.asus.com/support for more information on the BIOS

FlashBack™ Feature.

vii

PRIME B650M-R specications summary

CPU AMD Socket AM5 for AMD Ryzen™ 7000 Series Desktop Processors*

* Refer to www.asus.com for CPU support list.

Chipset AMD B650 Chipset

Memory

2 x DIMM slots, Max. 96GB, DDR5 Non-ECC, Un-buffered Memory*

Dual Channel Memory Architecture

Supports AMD Extended Profiles for Overclocking (EXPO™)

* Supported memory types, data rate (speed), and number of DRAM modules vary

depending on the CPU and memory configuration, for more information please

refer to CPU/Memory Support list under the Support tab of product information

site or visit https://www.asus.com/support/.

** Non-ECC, un-buffered DDR5 memory supports On-Die ECC function.

Graphics

1 x HDMI™ port*

* Graphics specifications may vary between CPU types. Please refer to AMD CPU

specifications.

** Supports 4K@60Hz as specified in HDMI 2.1.

Expansion Slots

AMD Ryzen™ 7000 Series Desktop Processors*

- 1 x PCIe 4.0 x16 slot (supports x16 mode)

AMD B650 Chipset

- 1 x PCIe 4.0 x1 slot

* Please check the PCIe bifurcation table on the support site

(https://www.asus.com/support/FAQ/1037507/).

** To ensure compatibility of the device installed, please refer to

https://www.asus.com/support/ for the list of supported peripherals.

Storage

Supports 2 x M.2 slots and 4 x SATA 6Gb/s ports*

AMD Ryzen™ 7000 Series Desktop Processors

- M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

AMD B650 Chipset

- M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

4 x SATA 6Gb/s ports

* AMD RAIDXpert2 Technology supports both PCIe RAID 0/1/10 and SATA RAID

0/1/10.

Ethernet 1 x Realtek 2.5Gb Ethernet

ASUS LANGuard

USB

Rear USB (Total 6 ports)

2 x USB 5Gbps ports (2 x Type-A)

4 x USB 2.0 ports (4 x Type-A)

Front USB (Total 7 ports)

1 x USB 5Gbps connector (supports USB Type-C®)

1 x USB 5Gbps header supports 2 additional USB 5Gbps ports

2 x USB 2.0 headers support 4 additional USB 2.0 ports

(continued on the next page)

viii

PRIME B650M-R specifications summary

Audio

Realtek 7.1 Surround Sound High Definition Audio CODEC*

- Supports: Jack-detection, Multi-streaming, Front Panel Jack-retasking

- Supports up to 24-Bit/192 kHz playback

Audio Features

- Audio Shielding

- Premium audio capacitors

- Dedicated audio PCB layers

* A chassis with an HD audio module in the front panel is required to support

7.1 Surround Sound audio output.

Back Panel I/O Ports

2 x USB 5Gbps ports (2 x Type-A)

4 x USB 2.0 ports (4 x Type-A)

1 x HDMI™ port

1 x Realtek 2.5Gb Ethernet port

3 x Audio jacks

1 x BIOS FlashBack™ button

Internal I/O

connectors

Fan and Cooling Related

1 x 4-pin CPU Fan header

2 x 4-pin Chassis Fan headers

Power Related

1 x 24-pin Main Power connector

1 x 8-pin +12V Power connector

Storage Related

2 x M.2 slots (Key M)

4 x SATA 6Gb/s ports

USB

1 x USB 5Gbps connector (supports USB Type-C®)

1 x USB 5Gbps header supports 2 additional USB 5Gbps ports

2 x USB 2.0 headers support 4 additional USB 2.0 ports

Miscellaneous

3 x Addressable Gen 2 headers

1 x Clear CMOS header

1 x COM Port header

1 x Front Panel Audio header (F_AUDIO)

1 x S/PDIF Out header

1 x Speaker header

1 x SPI TPM header (14-1pin)

1 x 10-1 pin System Panel header

(continued on the next page)

PRIME B650M-R specifications summary

Special Features

ASUS 5X PROTECTION III

- DIGI+ VRM

- LANGuard

- Overvoltage Protection

- SafeSlot Core

- Stainless-Steel Back I/O

ASUS Q-Design

- Q-DIMM

- Q-LED Core

- Q-Slot

ASUS EZ DIY

- BIOS FlashBack™ button

- BIOS FlashBack™ LED

ASUS Thermal Solution

- VRM heatsink design

Aura Sync

- Addressable Gen 2 headers

Software Features

ASUS Exclusive Software

Armoury Crate

- Aura Creator

- Aura Sync

- Fan Xpert 2+

- Power Saving

- Two-Way AI Noise Cancelation

AI Suite 3

- TurboV EVO

- DIGI+ VRM

- PC Cleaner

ASUS CPU-Z

Norton 360 Deluxe (60 Days Free Trial)

WinRAR (40 Days Free Trial)

UEFI BIOS

ASUS EZ DIY

- ASUS CrashFree BIOS 3

- ASUS EZ Flash 3

- ASUS UEFI BIOS EZ Mode

BIOS 256 Mb Flash ROM, UEFI AMI BIOS

(continued on the next page)

PRIME B650M-R specifications summary

BIOS CAP Filename PRIME B650M-R: A5508.CAP

Manageability WOL by PME, PXE

Operating System Windows® 11

Windows® 10 64-bit

Form Factor micro-ATX Form Factor

9.3 inch x 8.7 inch ( 23.6 cm x 22.1 cm )

Specifications are subject to change without notice. Please refer to the ASUS website for

the latest specifications.

1-1

Product Introduction

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded

object or a metal object, such as the power supply case, to avoid damaging them due

to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the

bag that came with the component.

• Before you install or remove any component, ensure that the power supply is switched

off or the power cord is detached from the power supply. Failure to do so may cause

severe damage to the motherboard, peripherals, or components.

• The pin definitions in this chapter are for reference only. The pin names depend on the

location of the header/jumper/connector.

• The illustrations for this chapter are for reference only.

1.1 Before you proceed

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

Motherboard User Manual

1-2

1.2 Motherboard layout

DDR5 DIMM_A (64bit, 288-pin module)

SOCKET AM5

DDR5 DIMM_B (64bit, 288-pin module)

CPU_FAN

DIGI+

VRM

CHA_FAN1

CHA_FAN2

F_PANEL

COM_DEBUG

COM

SATA6G_4 SATA6G_2 SATA6G_1

SATA6G_3

CLRTC

SPDIF_OUT

ADD_GEN 2_2

ADD_GEN 2_3

ADD_GEN 2_1

CPU_12V

ATX_PWR

U5G_89

BATTERY

HDMI

LAN_USB_1011

USB_1_5

U5G_34

Super

I/O

PCIEX1

2242

256Mb

BIOS

TPM

22602280

224222602280

PCIEX16

USB_1617 USB_1415

F_AUDIO

23.6cm(9.3in)

M.2_1(SOCKET3)

PCIE SATA

4.0 X4 X

M.2_2(SOCKET3)

PCIE SATA

4.0 X4 X

SPEAKER

AMD

B650

22.1cm(8.7in)

Ethernet

Audio

CODEC

U5G_C6

BIOS_FLBK

FLBK_LED

AUDIO

14 4 1115

5 1 26 4

181013 7

1.2.1 Layout contents

1. CPU socket

The motherboard comes with an AMD Socket AM5 designed for AMD Ryzen™ 7000 Series

Desktop Processors.

For more details, refer to CPU installation.

2. DIMM slots

The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR5

(Double Data Rate 5) memory modules.

For more details, refer to DIMM installation.

Chapter 1: Product Introduction

1-3

3. Expansion slots

This motherboard supports one PCIe 4.0 x16 graphics card and one PCIe 4.0 x1 network

card, SCSI card or other cards that comply with the PCI Express specication.

4. Fan headers

The Fan headers allow you to connect fans to cool the system.

5. Power connectors

These Power connectors allow you to connect your motherboard to a power supply. The

power supply plugs are designed to t in only one orientation. Find the proper orientation and

push down rmly until the power supply plugs are fully inserted.

Ensure to connect the 8-pin power plug.

We recommend that you use a PSU with a higher power output when conguring a system

with more power-consuming devices. The system may become unstable or may not boot

up if the power is inadequate.

6. M.2 slots (Key M)

The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.

AMD Ryzen™ 7000 Series Desktop Processors

- M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

- M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

7. SATA 6Gb/s ports

The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and

hard disk drives via SATA cables.

8. USB 5Gbps Type-C® Front Panel connector

The USB 5Gbps Type-C® connector allows you to connect a USB

5Gbps Type-C® module for an additional USB 5Gbps Type-C® port.

The USB 5Gbps Type-C® connector provides data transfer speeds

of up to 5 Gb/s.

9. USB 5Gbps header

The USB 5Gbps header allows you to connect a USB 5Gbps

module for additional USB 5Gbps ports. The USB 5Gbps header

provides data transfer speeds of up to 5 Gb/s.

10. USB 2.0 headers

The USB 2.0 headers allow you to connect USB modules for

additional USB 2.0 ports. The USB 2.0 header provides data

transfer speeds of up to 480 Mb/s.

DO NOT connect a 1394 cable to the USB connectors.

Doing so will damage the motherboard!

GND

FAN PWR

FAN IN

FAN PWM

CC1

VBUS

RX1-

RX1+

GND

TX1-

TX1+

VBUS

TX2+

TX2-

GND

RX2+

RX2-

GND

D-

D+

CC2

USB3+5V

IntA_P1_SSRX-

IntA_P1_SSRX+

GND

IntA_P1_SSTX-

IntA_P1_SSTX+

GND

IntA_P1_D-

IntA_P1_D+

GND

PIN 1

USB3+5V

IntA_P2_SSRX-

IntA_P2_SSRX+

GND

IntA_P2_SSTX-

IntA_P2_SSTX+

GND

IntA_P2_D-

IntA_P2_D+

GND

USB_P1+

USB_P1-

USB+5V

GND

USB_P2+

USB_P2-

USB+5V

PIN 1

USB_12

Motherboard User Manual

1-4

11. Addressable Gen 2 header

The Addressable Gen 2 header allows you to connect individually

addressable RGB WS2812B LED strips or WS2812B based LED strips.

Before you install or remove any component, ensure that the power

supply is switched off or the power cord is detached from the power

supply. Failure to do so may cause severe damage to the motherboard,

peripherals, or components.

• The Addressable Gen 2 header supports WS2812B addressable RGB LED strips (5V/

Data/Ground), with a maximum power rating of 3A (5V), and the addressable headers

on this board can handle a combined maximum of 500 LEDs.

• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the addressable RGB LED strip is

connected in the correct orientation, and the 5V connector is aligned with the 5V

header on the motherboard.

• The addressable RGB LED strip will only light up when the system is powered on.

12. Clear CMOS header

The Clear CMOS header allows you to clear the Real Time Clock (RTC) RAM

in the CMOS, which contains the date, time, system passwords, and system

setup parameters.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS setup to re-

enter data.

DO NOT short-circuit the pins except when clearing the RTC RAM. Short-circuiting or

placing a jumper cap will cause system boot failure!

If the steps above do not help, remove the onboard button cell battery and short the two

pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the button

cell battery.

13. COM Port header

The COM (Serial) Port connector allows you to connect a COM port module.

Connect the COM port module cable to this connector, then install the

module to a slot opening on the system chassis.

14. Front Panel Audio header

The Front Panel Audio header is for a chassis-mounted front

panel audio I/O module that supports HD Audio. Connect one

end of the front panel audio I/O module cable to this header.

ADD_GEN 2

Ground

Data

+5V

PIN 1

CLRTC

PIN 1

RXD

DTR

DSR

CTS

COM

DCD

TXD

GND

RTS

F_AUDIO

Chapter 1: Product Introduction

1-5

15. S/PDIF Out header

The S/PDIF Out header allows you to connect the Sony/Philips Digital

Interface (S/PDIF) Out module.

16. Speaker header

The Speaker header allows you to connect the chassis-mounted system

warning speaker. The speaker allows you to hear system beeps and

warnings.

17. SPI TPM header

This header supports a Trusted Platform Module (TPM)

system with a Serial Peripheral Interface (SPI), allowing

you to securely store keys, digital certicates, passwords

and data. A TPM system also enhances network security,

protects digital identities, and ensures platform integrity.

18. System Panel header

The System Panel header supports several chassis-mounted functions.

• System Power LED header (+PWR_LED-)

The 2-pin header allows you to connect the System Power LED. The

System Power LED lights up when the system is connected to a power

source, or when you turn on the system power, and blinks when the

system is in sleep mode.

• Storage Device Activity LED header (+HDD_LED-)

The 2-pin header allows you to connect the Storage Device Activity

LED. The Storage Device Activity LED lights up or blinks when data

is read from or written to the storage device or storage device add-on

card.

• Power Button/Soft-off Button header (PWR_BTN)

The 2-pin header allows you to connect the system power button. Press

the power button to power up the system, or put the system into sleep or soft-off mode

(depending on the operating system settings).

• Reset button header (RESET)

The 2-pin header allows you to connect the chassis-mounted reset button. Press the

reset button to reboot the system.

19. BIOS FlashBack™ LED

The BIOS FlashBack™ LED lights up or blinks to indicate the status of

the BIOS FlashBack™.

Scan the code for more information on BIOS FlashBackTM function.

SPDIF_OUT

+5V

GND

Speaker Out

SPEAKER

PIN 1

PWR_BTN

PWR_LED+

PWR_LED-

PWR

GND

HDD_LED+

HDD_LED-

Ground

HWRST#

(NC)

F_PANEL

+PWR_LED-

+HDD_LED- RESET

TPM

PIN 1

SPI_TPM_PWR

SPI_TPM_RST#

F_SPI_PWR

F_SPI_CZS0#_R

T_SPI_MISO

F_SPI_HOLD#_R

S_SPI_TPM_IRQ#

S_SPI_TPM_CS#

TPM_DETECT_L

GND

T_SPI_CLK

T_SPI_MOSI

Motherboard User Manual

VBUS

TX1+

TX1-

GND

RX1+

RX1-

VBUS

CC1

CC2

D+

D-

GND

RX2-

RX2+

GND

TX2-

TX2+

VBUS

TX1+

TX1-

GND

RX1+

RX1-

VBUS

CC1

CC2

D+

D-

GND

RX2-

RX2+

GND

TX2-

TX2+

VBUS

1-6

1.2.2 Rear panel connectors

3 4

1 2

5 6

Rear panel connectors

1. Realtek 2.5Gb Ethernet port*

2. Audio jacks**

3. HDMI™ port

4. BIOS FlashBack™ button

5. USB 5Gbps ports 3, 4

6. USB 2.0 ports 1, 5, 10, 11

* and **: Refer to the tables below for LAN port LEDs, and audio port definitions.

We strongly recommend that you connect your devices to ports with matching data transfer

rate. For example connecting your USB 5Gbps devices to USB 5Gbps ports for faster and

better performance for your devices.

Speed LED

Status Description

OFF No link

GREEN 2.5 Gbps connection

ORANGE 1 Gbps / 100 Mbps /

10 Mbps connection

Activity Link LED

Status Description

OFF No link

GREEN Linked

BLINKING Data activity

ACT/LINK

LED

SPEED

LED

LAN port

* Realtek 2.5Gb Ethernet port LED indications

Chapter 1: Product Introduction

1-7

** Audio 2, 4, 5.1 or 7.1-channel configuration

Port 2-channel 4-channel 5.1-channel 7.1-channel

Rear panel

LINE IN - Rear Speaker

Out

Rear Speaker

Out

Rear Speaker

Out

LINE OUT Front Speaker

Out

Front Speaker

Out

Front Speaker

Out

Front Speaker

Out

MIC IN - Center/

Subwoofer

Center/

Subwoofer

Front panel

HEADPHONE

(Lime) - - - Side Speaker Out

MIC IN

(Pink) - - - -

Motherboard User Manual

1-8

1.3 CPU installation

Unplug all power cables before installing the CPU.

• The AM5 socket has a different pinout design. Ensure that you use a CPU designed

for the AM5 socket. The CPU fits in only one correct orientation. DO NOT force the

CPU into the socket to prevent bending the connectors on the socket and damaging

the CPU.

• ASUS will not cover damages resulting from incorrect CPU installation/removal,

incorrect CPU orientation/placement, or other damages resulting from negligence by

the user.

Chapter 1: Product Introduction

Apply the Thermal Interface Material to the CPU cooling system and CPU before you install

the cooling system, if necessary.

1-9

1.4 DIMM installation

A DDR5 memory module is notched differently from a DDR, DDR2, DDR3, or DDR4

module. DO NOT install a DDR, DDR2, DDR3, or DDR4 memory module to the DDR5

slot.

The figure illustrates the location of the DDR5 DIMM sockets

Recommended memory congurations

You may install Non-ECC DDR5 DIMMs into the DIMM sockets.

• You may install varying memory sizes in the DIMM channels. The system maps the

total size of the lower-sized channel for the dual-channel configuration. Any excess

memory from the higher-sized channel is then mapped for single-channel operation.

• The default memory operation frequency is dependent on its Serial Presence Detect

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value.

• For system stability, use a more efficient memory cooling system to support a full

memory load or overclocking condition.

• Always install the DIMMS with the same CAS Latency. For an optimum compatibility,

we recommend that you install memory modules of the same version or data code

(D/C) from the same vendor. Check with the vendor to get the correct memory

modules.

• Visit the ASUS website for the latest QVL.

DIMM_A

DIMM_B

DIMM_A

DIMM_B

DIMM_A

Motherboard User Manual

1-10

Installing a DIMM

To remove a DIMM

Chapter 1: Product Introduction

Pagina se încarcă...

Asus PRIME B650M-R Manual de utilizare

Marca: Asus

Model: PRIME B650M-R

Categorie: Plăci de bază

Tip: Manual de utilizare

Acest manual este potrivit și pentru

PRIME B650M-R-CSM

Descărcați PDF

raport

în alte limbi

English: Asus PRIME B650M-R User manual
italiano: Asus PRIME B650M-R Manuale utente

Asus PRIME B650M-R Manual de utilizare

Acest manual este potrivit și pentru

Asus PRIME B650M-R Manual de utilizare

în alte limbi

Lucrări înrudite