Yamaha RX-V992 Manualul proprietarului

R X-V992

Natural Sound AV Receiver

Récepteur audiovisuel “Son Naturel”

OWNER’S MANUAL

MODE D’EMPLOI

R X-V992

DIGITAL/

PRO LOGIC

ENHANCED

MOVIE

THEATER

TV

SPORTS

STADIUM

DISCO

CONCERT

HALL

ROCK

CONCERT

CHURCHJAZZ CLUB

EFFECT

VOLUME

NATURAL SOUND AV RECEIVER

RX–V992

CINEMA DSP

SPEAKERS

PHONES

A

ON

OFF

B

BASS

EXTENSION

TONE

BYPASS

BASS TREBLE BALANCE

VIDEO AUX

S VIDEO

VIDEO L AUDIO R

DELAY/CENTER

/REAR/SWFR

MAN’L

/

AUTO FM

TUNING

MODE

AUTO

/

MAN’L MONO

SET

MENU

FM/AM

DOWN

TUNING

UP

MEMORY

EDIT

55

4

3

2

l

0

l

2

3

4

55

4

3

2

l

0

l

2

3

4

55

4

3

2

l

0

l

2

3

4

LR

REC OUT/

ROOM 2 SELECTOR

VIDEO AUX

VCR 2

VCR 1

TV/DBS

DVD/LD

SOURCE

TAPE (MD)

TUNER

CD

PHONO

VCR 2 DVD

/

LDVCR 1

VIDEO AUX

TAPE (MD) TV/DBS

TUNER

CD

PHONO

A

/

B

/

C

/

D

/

E

1

2 3 4 5 6 7 8

POWER

l6

20

28

40

60

l2

8

4

2

0

–dB

1 Read Instructions – All the safety

and operating instructions should be read

before the unit is operated.

2 Retain Instructions – The safety and

operating instructions should be retained

for future reference.

3 Heed Warnings – All warnings on the

unit and in the operating instructions

should be adhered to.

4 Follow Instructions – All operating

and other instructions should be followed.

5 Water and Moisture – The unit

should not be used near water – for

example, near a bathtub, washbowl,

kitchen sink, laundry tub, in a wet

basement, or near a swimming pool, etc.

6 Carts and Stands – The unit should

be used only with a cart or stand that is

recommended by the manufacturer.

6A A unit and cart

combination should be

moved with care. Quick

stops, excessive force, and

uneven surfaces may cause

the unit and cart combination to overturn.

7 Wall or Ceiling Mounting – The unit

should be mounted to a wall or ceiling

only as recommended by the

manufacturer.

8 Ventilation – The unit should be

situated so that its location or position

does not interfere with its proper

ventilation. For example, the unit should

not be situated on a bed, sofa, rug, or

similar surface, that may block the

ventilation openings; or placed in a built-

in installation, such as a bookcase or

cabinet that may impede the flow of air

through the ventilation openings.

9 Heat – The unit should be situated

away from heat sources such as

radiators, stoves, or other appliances that

produce heat.

10 Power Sources – The unit should be

connected to a power supply only of the

type described in the operating

instructions or as marked on the unit.

11 Power-Cord Protection – Power-

supply cords should be routed so that

they are not likely to be walked on or

pinched by items placed upon or against

them, paying particular attention to cords

at plugs, convenience receptacles, and

the point where they exit from the unit.

12 Cleaning – The unit should be

cleaned only as recommended by the

manufacturer.

13 Nonuse Periods – The power cord of

the unit should be unplugged from the

outlet when left unused for a long period

of time.

14 Object and Liquid Entry – Care

should be taken so that objects do not fall

into and liquids are not spilled into the

inside of the unit.

15 Damage Requiring Service – The

unit should be serviced by qualified

service personnel when:

A. The power-supply cord or the plug

has been damaged;

or

B. Objects have fallen, or liquid has

been spilled into the unit;

or

C. The unit has been exposed to rain;

or

D. The unit does not appear to operate

normally or exhibits a marked change in

performance;

or

E. The unit has been dropped, or the

cabinet damaged.

16 Servicing – The user should not

attempt to service the unit beyond those

means described in the operating

instructions. All other servicing should be

referred to qualified service personnel.

17 Power Lines – An outdoor antenna

should be located away from power lines.

18 Grounding or Polarization –

Precautions should be taken so that the

grounding or polarization is not defeated.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK), NO USER-SERVICEABLE

PARTS INSIDE, REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

•

Explanation of Graphical Symbols

CAUTION

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

SAFETY INSTRUCTIONS

We Want You Listening For A Lifetime

(for US customers only)

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group

want you to get the most out of your equipment by playing it at a safe

level. One that lets the sound come through loud and clear without

annoying blaring or distortion – and, most importantly, without affecting

your sensitive hearing. Since hearing damage from loud sounds is often

undetectable until it is too late, YAMAHA and the Electronic Industries

Association’s Consumer Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

English

19 For US customers only:

Outdoor Antenna Grounding – If an

outside antenna is connected to this unit,

be sure the antenna system is grounded

so as to provide some protection against

voltage surges and built-up static

charges. Article 810 of the National

Electrical Code, ANSI/NFPA 70, provides

information with regard to proper

grounding of the mast and supporting

structure, grounding of the lead-in wire to

an antenna discharge unit, size of

grounding conductors, location of

antenna discharge unit, connection to

grounding electrodes, and requirements

for the grounding electrode.

Note to CATV system installer:

This reminder is provided to call the

CATV system installer’s attention to

Article 820-40 of the NEC that

provides guidelines for proper

grounding and, in particular, specifies

that the cable ground shall be

connected to the grounding system of

the building, as close to the point of

cable entry as practical.

FCC INFORMATION

(for US customers only)

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this

manual, meets FCC requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT : When connecting this product to accessories and/or another

product use only high quality shielded cables. Cable/s supplied with this product

MUST be used. Follow all installation instructions. Failure to follow instructions

could void your FCC authorization to use this product in the USA.

3. NOTE : This product has been tested and found to comply with the requirements

listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with

these requirements provides a reasonable level of assurance that your use of

this product in a residential environment will not result in harmful interference

with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used

according to the instructions found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not

occur in all installations. If this product is found to be the source of interference,

which can be determined by turning the unit “OFF” and “ON”, please try to

eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the

interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits

or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the

antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type

cable.

If these corrective measures do not produce satisfactory results, please contact

the local retailer authorized to distribute this type of product. If you can not

locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A.

6660 Orangethorpe Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha

Corporation of America or its subsidiaries.

SPECIAL NOTES FOR FCC COMPOSITE DEVICE (for US

customers only)

This device is a composite system. The digital device component may not cause

harmful interference.

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

Congratulations!

You are the proud owner of a Yamaha Digital Sound Field Processing (DSP) System—an

extremely sophisticated audio component. The DSP system takes full advantage of Yamaha’s

undisputed leadership in the field of digital audio processing to bring you a whole new world of

listening experiences. Follow the instructions in this manual carefully when setting up your system,

and the DSP system will sonically transform your room into a wide range of listening

environments—anything from a famous concert hall to a cozy jazz club. In addition, you get

incredible realism from Dolby-Surround encoded video sources using the built-in Dolby Pro Logic

Surround Decoder and Dolby Digital (AC-3) Decoder.

Seven built-in channels of amplification on this model mean that no additional amplifiers are

required to enjoy advanced digital sound field processing.

Rather than tell you about the wonders of digital sound field processing, however, let’s get right

down to the business of setting up the system and trying out its many capabilities. Please read this

operation manual carefully and store it in a safe place for later reference.

1

English

1. PLEASE READ THIS MANUAL CAREFULLY

To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2. AVOID EXCESSIVE HEAT, HUMIDITY, DUST

AND VIBRATION

Keep the unit away from locations where it is likely to be

exposed to high temperatures or humidity—such as

near radiators, stoves, etc. Also avoid locations which

are subject to excessive dust accumulation or vibration

which could cause mechanical damage.

3. INSTALL THE UNIT IN WELL-VENTILATED

CONDITION

The openings on the cabinet assure proper ventilation

of the unit. If these openings are obstructed, the

temperature inside the cabinet will rise rapidly.

Therefore, avoid placing objects against these

openings, and install the unit in well-ventilated

condition. Make sure to allow a space of at least 10

cm behind, 20 cm on the both sides and 30 cm above

the top panel of the unit. Otherwise it may not only

damage the unit, but also cause fire.

4. KEEP THE AC POWER PLUG

DISCONNECTED DURING VACATION ETC.

When not planning to use this unit for long periods of

time (ie., vacation, etc.), disconnect the AC power

plug from the wall outlet.

5. AVOID PHYSICAL SHOCKS

Strong physical shocks to the unit can cause damage.

Handle it with care.

6. DO NOT OPEN THE UNIT OR ATTEMPT

REPAIRS OR MODIFICATIONS YOURSELF

This product contains no user-serviceable parts. Refer

all maintenance to qualified Yamaha service personnel.

Opening the unit and/or tampering with the internal

circuitry will make servicing difficult and will endanger

you and your unit.

7. MAKE SURE POWER IS OFF BEFORE

MAKING OR REMOVING CONNECTIONS

Always turn power OFF prior to connecting or

disconnecting cables. This is important to prevent

damage to the unit itself as well as other connected

equipment.

8. USE THIS UNIT PROPERLY

Do not use force on switches, controls or connection

wires. When moving the unit, first disconnect the

power plug and the wires connected to other

equipment. Never pull the wires themselves.

9. TAKE CARE OF THE VOLUME CONTROL

SETTING

Always set the VOLUME control to “–

∞

” before

starting the audio source play. Increase the volume

gradually to an appropriate level after playback has

been started.

10. HANDLE CABLES CAREFULLY

Always plug and unplug cables—including the AC

cord—by gripping the connector, not the cord.

11. PREVENT LIGHTNING DAMAGE

To prevent lightning damage, disconnect the AC

power plug and disconnect the antenna cable when

there is an electrical storm.

12. CLEAN WITH A SOFT DRY CLOTH

Never use solvents such as benzine or thinner to clean

the unit. Wipe clean with a soft, dry cloth.

13. USE THIS UNIT WITH THE CORRECT

VOLTAGE

The voltage to be used must be the same as that

specified on this unit. Using this unit with a higher

voltage than that which is specified is dangerous and

may result in a fire or other type of accident causing

damage. YAMAHA will not be held responsible for any

damage resulting from use of this unit with a voltage

other than that which is specified.

IMPORTANT!

Please record the model and serial number of your

unit in the space below.

Model:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

Voltage Selector (General Model only)

The voltage selector on the rear panel of this unit

must be set for your local mains voltage

BEFORE plugging into the AC mains supply.

Voltages are 110/120/220/240 AC, 50/60 Hz.

WARNING

To reduce the risk of fire or electric shock, do not

expose this unit to rain or moisture.

CAUTION (FOR CANADA MODEL)

TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT AND FULLY

INSERT.

FOR CANADIAN CUSTOMER

THIS CLASS B DIGITAL APPARATUS MEETS ALL

REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS.

The apparatus is not disconnected from the AC

power source as long as it is connected to the wall

outlet, even if the apparatus itself is turned off.

PRECAUTIONS

C OR D

C D

A

VOLTAGE SELECTOR

240V

CENTER C OR D

:

4

Ω

MIN./ SPEAKER

SET SPEAKER MODE

C D

:

4

Ω

MIN./ SPEAKER

SET SPEAKER MODE

REAR

:

4

Ω

MIN./ SPEAKER

MAIN A OR B

:

4

Ω

MIN./ SPEAKER

A B

:

8

Ω

MIN./ SPEAKER

CENTER C OR D

:

8

Ω

MIN./ SPEAKER

SET SPEAKER MODE

C D

:

4

Ω

MIN./ SPEAKER

SET SPEAKER MODE

REAR

:

8

Ω

MIN./ SPEAKER

MAIN A OR B

:

8

Ω

MIN./ SPEAKER

A B

:

16

Ω

MIN./ SPEAKER

IMPEDANCE SELECTOR

AC OUTLETS

WARNING

Do not change the IMPEDANCE SELECTOR

switch setting while the power to this unit is

on, otherwise this unit may be damaged.

IMPEDANCE SELECTOR

(General model)

SAFETY INSTRUCTIONS...........................................Inside the cover

PRECAUTIONS...................................................................................1

GETTING STARTED ...........................................................................3

FEATURES ..........................................................................................5

SPEAKER SETUP.............................................................................10

CONTROLS & THEIR FUNCTIONS.................................................13

FRONT PANEL................................................................................13

DISPLAY PANEL.............................................................................16

CONNECTIONS.................................................................................18

REAR PANEL PARTS AND THEIR FUNCTIONS..........................18

REAR PANEL SWITCH AND CONTROL SETTINGS...................22

GENERAL INSTRUCTIONS FOR CONNECTIONS.....................22

CONNECTING AUDIO/VIDEO SOURCE EQUIPMENT

TO THIS UNIT .................................................................................23

ANTENNA CONNECTIONS...........................................................27

CONNECTING SPEAKER SYSTEMS...........................................30

SELECTING THE OUTPUT MODES SUITABLE FOR YOUR

SPEAKER SYSTEM .......................................................................35

CONNECTING AND CONTROLLING ROOM 2 EQUIPMENT.......38

CONNECTIONS..............................................................................38

SPEAKER BALANCE ADJUSTMENT ............................................40

ADJUSTMENTS IN THE “SET MENU”MODE................................42

GENERAL OPERATION...................................................................45

PLAYING A SOURCE.....................................................................45

RECORDING A SOURCE TO AUDIO/VIDEO TAPE

(OR DUBBING FROM A TAPE TO ANOTHER).............................47

TUNING OPERATIONS.....................................................................49

AUTOMATIC TUNING.....................................................................49

MANUAL TUNING...........................................................................49

PRESET TUNING ..............................................................................50

MANUAL PRESET TUNING...........................................................50

AUTOMATIC PRESET TUNING.....................................................51

EXCHANGING PRESET STATIONS..............................................52

SELECTING SOUND FIELD PROGRAMS......................................53

CANCELING THE EFFECT SOUND .............................................54

DESCRIPTIONS OF THE SOUND FIELD PROGRAMS..............55

ADJUSTING DELAY TIME AND EACH SPEAKER OUTPUT

LEVEL..............................................................................................58

SETTING THE SLEEP TIMER...........................................................60

REMOTE CONTROL UNIT...............................................................61

BASIC OPERATIONS (When the lid is open) ................................61

LEARNING NEW CONTROL FUNCTIONS (When the lid is open)

.........................................................................................................63

USING OPERATION CONTROL KEYS (When the lid is closed)

.........................................................................................................66

MACRO OPERATIONS (When the lid is closed) ...........................69

LEARNING A NEW FUNCTION.....................................................72

MAKING A NEW MACRO...............................................................74

CLEARING LEARNED FUNCTIONS.............................................75

TROUBLESHOOTING ......................................................................77

SPECIFICATIONS .............................................................................80

2

CONTENTS

3

English

GETTING STARTED

Unpacking

If you haven’t already done so, carefully remove this unit and its

accessories from the box and wrapping material.You should find the

unit itself and the following accessories.

Installing the Remote Control Unit Batteries

Since the remote control unit will be used for many of this unit’s

control operations, you should begin by installing the supplied

batteries.

1. Turn the remote control unit over and slide the battery

compartment cover downward in the direction of the arrow.

2. Insert the batteries (LR6, AA, UM-3 type), being careful to align

them with the polarity markings on the inside of the battery

compartment.

3. Close the battery compartment cover.

Remote control

User function stickers

Batteries

1

3

2

Indoor FM antenna

AM loop antenna

Antenna adapter

(U.S.A. and Canada models only)

4

* After you insert batteries (or you exchange batteries with new

ones), press the RESET button before using the remote control

unit.

Remote control transmitter operation range

Notes

●

There should be no large obstacles between the remote control

unit and the main unit.

●

If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.), it

might cause the remote control unit to work incorrectly. In this

case, reposition the main unit to avoid direct lighting.

Notes about the Remote Control Unit

● When you notice that remote control operation has become

erratic, or the distance from which the remote control will function

has decreased, it’s time to replace the batteries. Always replace all

batteries at the same time.

● This remote control uses an advanced, highly directional infrared

beam.Be sure to aim the remote control directly at the remote

control sensor on the main unit when operating.

30°

Remote control

sensor

Within approximately

6 m (19.7 feet)

RESET button

5

English

This unit incorporates a sophisticated, multi-program digital

sound field processor.The processor allows you to electronically

expand and change the shape of the audio sound field from both

audio and video sources, creating a theater-like experience in your

listening room.This unit has a total of 10 digital sound field

processor (DSP) modes.You can create an excellent audio sound

field by selecting a suitable sound field (this will, of course, depend

on what you will be listening to), and adding desired adjustments.

In addition, this unit incorporates a Dolby Pro Logic Surround

decoder and Dolby Digital (AC-3) decoder for multi-channel sound

reproduction of Dolby Surround encoded video sources.The

operation of the Dolby Pro Logic Surround or Dolby Digital (AC-3)

decoder can be controlled by selecting a corresponding DSP

program including combined operations of the Yamaha DSP and

the Dolby Pro Logic Surround or Dolby Digital (AC-3) decoder.

Digital Sound Field Processing

What is it that makes live music so good? Today’s advanced

sound reproduction technology lets you get extremely close to the

sound of a live performance, but chances are you’ll still notice

something missing, the acoustic environment of the live concert

hall. Extensive research into the exact nature of the sonic

reflections that create the ambience of a large hall has made it

possible for Yamaha engineers to bring you this same sound in

your own listening room, so you’ll feel all the sound of a live

concert.What’s more, our technicians, armed with sophisticated

measuring equipment, have even made it possible to capture the

acoustics of a variety of actual concert halls, jazz clubs, theaters,

etc. from around the world, to allow you to accurately recreate any

one of these live performance environments, all in your own home.

FEATURES

6

Dolby Pro Logic Surround

This unit employs a Dolby Pro Logic Surround decoder similar

to professional Dolby Stereo decoders used in many movie

theaters.By using the Dolby Pro Logic Surround decoder, you can

experience the dramatic realism and impact of Dolby Surround

movie theater sound in your own home. Dolby Pro Logic employs a

four channel five speaker system.The Pro Logic Surround system

divides the input signal into four levels: the left and right main

channels, the center channel (used for dialog), and the rear

surround sound channels (used for sound effects, background

noise, and other ambient noises).The center channel allows

listeners seated in even less-than-ideal positions to hear the dialog

originating from the action on the screen while experiencing good

stereo imaging. Dolby Surround is encoded on the sound track of

pre-recorded video tapes, laser discs, and some TV/cable

broadcasts.When you play a source encoded with Dolby Surround

on this unit, the Dolby Pro Logic Surround decoder decodes the

signal and distributes the surround-sound effects.

This Dolby Pro Logic Surround Decoder employs a digital

signal processing system.This system improves the stability of

sound at each channel and crosstalk between channels, so that

positioning of sounds around the room is more accurate compared

with conventional analog signal processing systems.

In addition, this unit features a built-in automatic input balance

control.This always assures you the best performance without

manual adjustment.

Dolby Digital (AC-3)

The built-in Dolby Digital (AC-3) Decoder leads you into a

totally new sound experiences.

Dolby Digital (AC-3) is a new generation of multi-channel digital

audio technology, or the newest spatial sound processing format

developed for 35 mm film-movies by employing a new kind of low

bit-rate audio coding.

Dolby Digital (AC-3) is a digital surround sound system that

provides completely independent multi-channel audio to

consumers.In multi-channel form, Dolby Digital (AC-3) provides

five full range channels in what is sometimes referred to as a “3/2”

configuration: three front channels (left, center and right), plus two

surround channels.A sixth bass-only effect channel is also

provided for output of LFE (low frequency effect), or low bass

effects that are independent of other channels.This channel is

counted as 0.1, thus giving rise to the term 5.1 channels in total.

Compared to Dolby Pro Logic that is referred to a “3/1” system

(left front, center, right front and just one surround channel), Dolby

Digital (AC-3) features two surround channels, called stereo or

split surrounds, each offering the same full range fidelity as the

three front channels.

Sound of wide dynamic range reproduced by the five full range

channels presents listeners much excitement that has never been

experienced before.Precise sound orientation by the discrete

digital sound processing expands realism that the original movie

possesses.

7

English

Laser Disc is a home audio format that could benefit from

Dolby Digital (AC-3). In the near future, Dolby Digital (AC-3) will

also be applied to DBS, CATV, DVD and HDTV.The ongoing

release of Dolby Stereo Digital theatrical films now underway will

provide an immediate source of Dolby Digital (AC-3) encoded

video software.

Manufactured under license from Dolby Laboratories Licensing

Corporation.“Dolby”, “AC-3”, “Pro Logic”, and the double-D symbol

are trademarks of Dolby Laboratories Licensing Corporation.

The following original functions make the surround-sound effect

of Dolby Digital (AC-3) become the most suitable for your audio

system and the listening conditions.

● Dynamic range (sound scale) of source can be changed so

that it will be suitable for the listening conditions.

● Output of low bass from any channel can be assigned to

either the MAIN SPEAKERS terminals or SUBWOOFER

terminals to maximize system performance.

● Output of LFE can be assigned to either the MAIN

SPEAKERS terminals or SUBWOOFER terminals to

maximize system performance.

Dolby Surround + DSP (CINEMA DSP)

Dolby Surround sound system shows its full ability in a large

movie theater, because movie sounds are originally designed to be

reproduced in a large movie theater using many speakers. It is

difficult to create a sound environment similar to that of a movie

theater in your listening room, because the room size, materials of

inside walls, the number of speakers, etc. of your listening room is

much different from those of a movie theater.

Yamaha DSP technology made it possible to present you with

nearly the same sound experience as that of a large movie theater

in your listening room by compensating for lack of presence and

dynamics in your listening room with its original digital sound fields

combined with Dolby Surround sound field.

The YAMAHA “CINEMA DSP” logo indicates those programs

are created by the combination of Dolby Surround and YAMAHA

DSP technology.

CINEMA DSP

8

Dolby Pro Logic + 2 Digital Sound Fields

Digital sound fields are created on the presence side and the

rear surround side of the Dolby Pro Logic Surround-decoded

sound field respectively.They create a wide acoustic environment

and emphasize surround-effect in the room, letting you feel much

presence as if you are watching a movie in a popular Dolby Stereo

theater.

This combination is available when the sound field program No.

2, No. 3 or No. 4 is selected, and the input signal of source is

analog, PCM audio or encoded with the Dolby Digital (AC-3) in 2-

channels.

Dolby Digital (AC-3) + 3 Digital Sound Fields

Digital sound fields are created on the presence side and the

independent left and right surround sides of the Dolby Digital (AC-

3)-decoded sound field respectively.They create a wide acoustic

environment and much surround effect in the room without losing

high channel separation.With wide dynamic range of Dolby Digital

(AC-3) sound, this sound field combination lets you feel as if you

are watching a movie in the newest Dolby Stereo Digital theater.

This will be the most ideal home theater sound at the present time.

This combination is available when the sound field program No.

2, No. 3 or No. 4 is selected, and the input signal of source is

encoded with the Dolby Digital (AC-3) (except in 2-channels).

9

English

Video superimpose

If you connect your video cassette recorder, LD player, video

monitor, etc. to this unit, you can take advantage of this unit’s

capability to display program titles and information for various

setting changes and adjustments on your video monitor’s screen.

This information will be superimposed over the video image.

If there is no video source connected or it is turned off, the

information will be displayed over a blue colored background.

NOTE:The program titles and other information are also displayed

on the display panel of this unit.

TEST DOLBY SUR.

EFFECT LEVEL

CENTER 2dB

+

SPEAKERS

A

DSP

10

Setting Up Your Speaker System

This unit has been designed to provide the best sound field

quality with a full five-speaker system setup, using one extra pair of

effect speakers to generate the sound field plus one center

speaker for dialog.We therefore recommend that you use a five-

speaker setup. A four-speaker system using only one pair of effect

speakers for the sound field will still provide impressive ambience

and effects, however, and may be a good way to begin with this

unit.You can always upgrade to the full five speaker system later.

Use of the Center Dialog Speaker Is Recommended

When playing back a source with the DSP programs No. 1

through No. 4, or when the Dolby Digital (AC-3) is decoded with

any DSP program used, if the source contains center-channel

signals, dialog, vocals etc. are output from the center channel.

Therefore, if you want to maximize the performance of your

Audio/Video home theater system, it is recommended that you use

a center channel speaker.

If for some reason it is not practical to use a center speaker, it

is possible to enjoy movie viewing without it.Best results, however,

are obtained with the full system.

Use of a Subwoofer Expands Your Sound Field

It is also possible to further expand your system with the

addition of a subwoofer and amplifier.The use of a subwoofer is

effective not only for reinforcing bass frequencies from any or all

channels, but also for reproducing the LFE (low frequency effect)

sound with high fidelity when playing back a source with the Dolby

Digital (AC-3) decoded.You may wish to choose the convenience

of a Yamaha Active Servo Processing Subwoofer System, which

has its own built-in power amplifier.

SPEAKER SETUP

11

English

5 Speaker System

This is the recommended speaker

system, providing the best sound

effects.

When a normal stereo source is

played back with the sound field

programs No. 5 through No. 10, using

the effect speakers reproduces

effective sound field. When using the

sound field programs No. 1 through

No. 4 or when using any program with

the Dolby Digital (AC-3) decoded, the

center speaker provides precise center

localization.

CENTER SPEAKER—Set to NRML

or WIDE. (See page 35.)

4 Speaker System

Simplest system without center

speaker.

When a normal stereo source is

played back with the sound field

programs No. 5 through No. 10, a

sound effect matching that of a 5-

speaker system can be obtained.

When using the sound field programs

No. 1 through No. 4 or when using any

program with the Dolby Digital (AC-3)

decoded, center sound is output from

the left and right main speakers.

CENTER SPEAKER—Set to PHNTM.

(See page 35.)

12

Speakers and Speaker Placement

Your full five-speaker system will require two speaker pairs:the

MAIN SPEAKERS (your normal stereo speakers) and the REAR

SPEAKERS, plus the CENTER SPEAKER.You may also be using

a subwoofer.

The MAIN SPEAKERS should be high performance models

and have enough power handling capacity to accept the maximum

output of your audio system.

Other speakers do not have to be equal to the MAIN

SPEAKERS.For precise sound localization, however, it is ideal to

use high performance models that can reproduce sounds in full

range for the CENTER SPEAKER and the REAR SPEAKERS.

Place the MAIN SPEAKERS in the normal position.

Place the REAR SPEAKERS behind your listening position.

They should be nearly six feet up from the floor.

Place the CENTER SPEAKER precisely between the two MAIN

SPEAKERS.(To avoid interference, keep the speaker above or

below the television monitor, or use a magnetically shielded

speaker.)

If using a SUBWOOFER, such as a Yamaha Active Servo

Subwoofer System, the position of the speaker is not so critical

because low bass tones are not highly directional.

Main speaker

Center speaker

Subwoofer

Rear speaker

13

English

FRONT PANEL

CONTROLS & THEIR FUNCTIONS

POWER

DIGITAL/

PRO LOGIC

ENHANCED

MOVIE

THEATER

TV

SPORTS

STADIUM

DISCO

CONCERT

HALL

ROCK

CONCERT

CHURCHJAZZ CLUB

EFFECT

VCR 2 DVD

/

LDVCR 1

VIDEO AUX

TAPE (MD) TV/DBS

TUNER

CD

PHONO

VOLUME

l6

20

28

40

60

l2

8

4

2

0

–dB

SPEAKERS

PHONES

A

ON

OFF

B

BASS

EXTENSION

TONE

BYPASS

BASS TREBLE BALANCE REC OUT/

ROOM 2 SELECTOR

VIDEO AUX

S VIDEO

VIDEO L AUDIO R

DELAY/CENTER

/REAR/SWFR

MAN’L

/

AUTO FM

TUNING

MODE

AUTO

/

MAN’L MONO

SET

MENU

FM/AM

DOWN

TUNING

UP

MEMORY

EDIT

NATURAL SOUND AV RECEIVER

RX–V992

CINEMA DSP

A

/

B

/

C

/

D

/

E

1

2 3 4 5 6 7 8

55

4

3

2

l

0

l

2

3

4

55

4

3

2

l

0

l

2

3

4

55

4

3

2

l

0

l

2

3

4

LR

VIDEO AUX

VCR 2

VCR 1

TV/DBS

DVD/LD

SOURCE

TAPE (MD)

TUNER

CD

PHONO

1 4576 8

PONK

LIH

J M

G

FEDCBA09

23

(General Model)

* For control keys on the remote control unit, see pages 61 to 63.

14

1 POWER Switch

Turns this unit on and off.

2 Standby Indicator (Except U.S.A.and Canada models)

While the power of this unit is on, pressing the (SYSTEM

POWER) OFF key on the remote control unit switches this unit

to the standby mode. In this mode, the standby indicator is

illuminated.

3 Remote Control Sensor

Signals from the remote control unit are received here.

4 Display Panel

See pages 16 to 17.

5 DSP Program Selector Buttons

Select a DSP program.When a button is pressed, the name of

selected program lights up on the display panel.

6 Input Selector Buttons

Selects an input source that you want to listen to (and watch).

7 EFFECT Switch

Normally ON, this switch can be turned OFF to disable output

from the center and effect speakers so that the sound becomes

normal 2-channels.

* Even if this switch is off, when the Dolby Digital (AC-3) is

decoded, signals at all channels are distributed to the main

channels and output from the main speakers.

8 Master VOLUME Control

Simultaneously controls volume level at all outputs: main, rear

effect, center, and subwoofer. (This does not affect REC OUT

level.)

* When the volume is decreased by pressing the MUTE key on

the remote control unit, the indicator on the master VOLUME

control flashes on and off.

9 PHONES Jack

When you listen with headphones, connect the headphones to

the PHONES jack.You can listen to the sound to be output from

the main speakers through headphones.

When listening with headphones privately, set both the

SPEAKERS A and B switches to the OFF position and switch

off the digital sound field processor (so that no DSP program

name is illuminated on the display panel) by pressing the

EFFECT switch.

0 SPEAKERS Switches

Set the switch A or B (or both A and B) for the main speakers

(connected to this unit) you will use to the ON position. Set the

switch for the main speakers you will not use to the OFF

position. Selected main speakers are shown by the lighting of

“SPEAKERS A” and/or “SPEAKERS B” on the display panel.

A A/B/C/D/E Switch

Press this switch to select a desired group (A–E) of preset

stations.

B BASS EXTENSION Switch

When pressed inward (ON), boosts bass frequency response

at the main left and right channels while maintaining overall

tonal balance.If you do not have a subwoofer, the use of this

switch will be effective to reinforce the bass frequencies.

15

English

C TONE BYPASS switch

When this switch is pressed inward (ON), the input signal does

not pass through the tone (BASS and TREBLE) control circuitry

so that it is unaffected by the tone control circuitry. Use this

switch to obtain pure sound and to check the tone control

setting. Press this switch to release it outward (OFF) to use the

tone control circuitry.

D BASS and TREBLE Controls

Adjust low and high frequency response respectively for the

main channels only.

E BALANCE Control

Adjusts the left and right output volume to the Main Speakers to

compensate for sound imbalance caused by speaker positions

or listening room conditions.

F Preset Station Number Selector Buttons

Select a preset station number (1 to 8).

G REC OUT/ROOM 2 SELECTOR

Selects the source to be recorded to a tape deck or

VCR independently of the setting of the input selector buttons.

However, when set to the SOURCE position, the setting of the

input selector buttons decides the source to be recorded to a

tape deck or VCR.

Signals of the source selected by this selector are also output

from the ROOM 2 OUT jacks on the rear panel.

H FM/AM Switch

Press this switch to switch the reception band to FM or AM.

I MEMORY (MAN’L/AUTO FM) Button

When this button is pressed, the MEMORY indicator flashes for

about 5 seconds. During this period, select a desired preset

station number by pressing the corresponding preset station

number selector button to enter the displayed station into the

memory.

When this button is pressed and held for about 3 seconds, the

automatic preset tuning begins.(Refer to page 51 for details.)

J TUNING DOWN/UP Button

Used for tuning. Press the “UP” side to tune in to higher

frequencies, and press the “DOWN” side to tune in to lower

frequencies.

K EDIT Button

This button is used to exchange the places of two preset

stations with each other.

L TUNING MODE (AUTO/MAN’L MONO) Switch

Press this switch to switch the tuning mode to automatic or

manual. To select the automatic tuning mode, press this switch

so that “AUTO TUNING” lights up on the display panel. To

select the manual tuning mode, press this switch so that “AUTO

TUNING” goes off.

M DELAY/CENTER/REAR/SWFR Switch

Whenever pressed, selects the item of changing delay time,

center speaker output level, rear speaker output level and

subwoofer output level in turn.

* Depending on a mode of this unit, the number of selections is

reduced. For example, when the built-in digital sound field

processor (including the Dolby Pro Logic Decoder or the

Dolby Digital (AC-3) Decoder) is off, only the item for

changing subwoofer output level can be selected.

16

1 Preset Station Number Display

Shows the selected preset station number (1 to 8) and its group

(A to E).

2 Input Source/Station Frequency Display

Shows the currently selected input source, or the currently

selected station frequency and the band (FM or AM) when this

unit is in the tuner input source mode.

3 Multi-informatiom Display

Shows the currently selected DSP program, or information for

several adjustments or setting changes made on this unit.

4 MEMORY Indicator

When the MEMORY button is pressed, this indicator flashes for

about 5 seconds. During this period, the displayed station can

be programmed to the memory by using the A/B/C/D/E switch

and the preset station number selector buttons.

DISPLAY PANEL

DIGITAL

ENHANCED

PRESET

kHz

MHz

AM

FM

MEMORY

AUTO TUNING

SPEAKERS

A

SPEAKERS

B

STEREO

0 20 40 60 I00

TAPE 2 MONITOR

PCM

DIGITAL

70

mm

DIGITAL

SLEEP

mS dB

DSP

PRO LOGIC

1

6 7 85 9 0 A4

2 3

N –/+ Button

Adjusts the level of item selected by pressing the

DELAY/CENTER/REAR/SWFR switch.Moreover, performs

setting changes and adjustments for functions selected by

pressing the SET MENU switch.

O SET MENU Switch

Whenever pressed, selects functions in the SET MENU mode.

P Auxiliary Input Jacks (VIDEO AUX)

Connect an auxiliary video or audio unit such as a camcorder to

these jacks. If the connected video unit has a S video output

terminal, connect it to the S VIDEO jack to obtain a high resolution

picture.The unit connected to these jacks can be selected by the

corresponding input selector button and REC OUT/ROOM 2

SELECTOR.

Pagina se încarcă ...

Yamaha RX-V992 Manualul proprietarului

Yamaha RX-V992 Manualul proprietarului

în alte limbi

Lucrări conexe