Yamaha CLP-725 Manualul proprietarului

Categorie
Echipamente muzicale suplimentare
Tip
Manualul proprietarului
FR
EN
Owner’s Manual
Mode d’emploi
CLP
-
725
EnglishFrançais
Before using the instrument, be sure to read “PRECAUTIONS” on pages 5-6.
For information on assembling the instrument, refer to the instructions on page 31.
Avant d’utiliser l’instrument, lisez attentivement la section « PRÉCAUTIONS D’USAGE »
aux pages 5 et 6.
Pour plus d’informations sur l’assemblage de l’instrument, reportez-vous aux instructions
figurant en page 31.
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instruc-
tions contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may
void your authority, granted by the FCC, to use the prod-
uct.
2. IMPORTANT: When connecting this product to accesso-
ries and/or another product use only high quality shielded
cables. Cable/s supplied with this product MUST be used.
Follow all installation instructions. Failure to follow instruc-
tions could void your FCC authorization to use this prod-
uct in the USA.
3. NOTE: This product has been tested and found to com-
ply with the requirements listed in FCC Regulations, Part
15 for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance
that your use of this product in a residential environment
will not result in harmful interference with other electronic
devices. This equipment generates/uses radio frequen-
cies and, if not installed and used according to the instruc-
tions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Com-
pliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to dis-
tribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Corporation
of America, Electronic Service Division, 6600 Orangetho-
rpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products dis-
tributed by Yamaha Corporation of America or its subsid-
iaries.
* This applies only to products distributed by Yamaha Corporation of America. (class B)
FCC INFORMATION (U.S.A.)
* This applies only to products distributed by
Yamaha Corporation of America.
COMPLIANCE INFORMATION STATEMENT
(Supplierʼs declaration of conformity procedure)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Piano
Model Name : CLP-725
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference
that may cause undesired operation.
(FCC SDoC)
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important operating
and maintenance (servicing) instructions in
the literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart,
stand, tripod, bracket, or
table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
(UL60065_03)
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
For AC adaptor
4
CLP-725 Owner’s Manual
5
CLP-725 Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
This AC adaptor is designed for use with only Yamaha electronic
instruments. Do not use for any other purpose.
Indoor use only. Do not use in any wet environments.
CAUTION
When setting up, make sure that the AC outlet is easily accessible. If
some trouble or malfunction occurs, immediately turn off the power
switch of the instrument and disconnect the AC adaptor from the
outlet. When the AC adaptor is connected to the AC outlet, keep in
mind that electricity is flowing at the minimum level, even if the power
switch is turned off. When you are not using the instrument for a long
time, make sure to unplug the power cord from the wall AC outlet.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not place the power cord near heat sources such as heaters or
radiators. Also, do not excessively bend or otherwise damage the cord,
or place heavy objects on it.
Only use the voltage specified as correct for the instrument. The
required voltage is printed on the name plate of the instrument.
Use the specified adaptor (page 34) only. Using the wrong adaptor can
result in damage to the instrument or overheating.
Use only the supplied power cord/plug.
Check the electric plug periodically and remove any dirt or dust which
may have accumulated on it.
This instrument contains no user-serviceable parts. Do not open the
instrument or attempt to disassemble or modify the internal
components in any way. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or
wet conditions, or place on it any containers (such as vases, bottles or
glasses) containing liquids which might spill into any openings. If any
liquid such as water seeps into the instrument, turn off the power
immediately and unplug the power cord from the AC outlet. Then have
the instrument inspected by qualified Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit. A burning item
may fall over and cause a fire.
Do not place the bench in an unstable position where it might
accidentally fall over.
Do not play carelessly with or stand on the bench. Using it as a tool or
stepladder or for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent
the possibility of accident or injury.
If the bench screws become loose due to extensive long-term use,
tighten them periodically using the specified tool in order to prevent
the possibility of accident or injury.
Keep special watch over any small children so that they don’t fall off
the rear of the bench. Since the bench does not have a backrest,
unsupervised use may result in accident or injury.
When one of the following problems occur, immediately turn off the
power switch and disconnect the electric plug from the outlet. Then
have the device inspected by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
- If any cracks or breakages exist on the instrument.
For the AC adaptor
For the instrument
Power supply/AC adaptor
Do not open
Water warning
Fire warning
Using the bench (If included)
If you notice any abnormality
DMI-7 1/2
6
CLP-725 Owner’s Manual
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-
connector. Doing so can result in lower sound quality, or possibly
cause overheating in the outlet.
When removing the electric plug from the instrument or an outlet,
always hold the plug itself and not the cord. Pulling by the cord can
damage it.
Remove the electric plug from the outlet when the instrument is not to
be used for extended periods of time, or during electrical storms.
Assemble the instrument in the proper sequence by following the
assembly instructions in this manual. Also, make sure to tighten the
screws regularly. Failure to do so might result in damage to the
instrument or even injury.
Do not place the instrument in an unstable position where it might
accidentally fall over.
Do not go near the instrument during an earthquake. Strong shaking
during an earthquake could cause the instrument to move or tip over,
resulting in damage to the instrument or its parts, and possibly
causing injury.
When transporting or moving the instrument, always use two or more
people. Attempting to lift the instrument by yourself may damage your
back, result in other injury, or cause damage to the instrument itself.
Before moving the instrument, remove all connected cables, to prevent
damage to the cables or injury to anyone who might trip over them.
When setting up the product, make sure that the AC outlet you are
using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug from the
outlet. Even when the power switch is turned off, electricity is still
flowing to the product at the minimum level. When you are not using
the product for a long time, make sure to unplug the power cord from
the wall AC outlet.
Before connecting the instrument to other electronic components, turn
off the power for all components. Before turning the power on or off for
all components, set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels
and gradually raise the volume controls while playing the instrument to
set the desired listening level.
Do not insert a finger or hand in any gaps on the key cover or
instrument. Also take care that the key cover does not pinch your
finger.
Never insert or drop paper, metallic, or other objects into the gaps on
the key cover, panel or keyboard. This could cause physical injury to
you or others, damage to the instrument or other property, or
operational failure.
Do not rest your weight on, or place heavy objects on the instrument,
and do not use excessive force on the buttons, switches or connectors.
Keep small parts out of the reach of infants. Your children may
accidentally swallow them.
Do not use the instrument/device or headphones for a long period of
time at a high or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing loss or ringing
in the ears, consult a physician.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (power
indicator is off), electricity is still flowing to the instrument at the
minimum level.
When you are not using the instrument for a long time, make sure you
unplug the power cord from the wall AC outlet.
Power supply/AC adaptor
Assembly
Location
Yamaha cannot be held responsible for damage caused by improper use or
modifications to the instrument, or data that is lost or destroyed.
Connections
Handling caution
DMI-7 2/2
The model number, serial number, power requirements, etc., may be found on or
near the name plate, which is at the bottom of the unit. You should note this
serial number in the space provided below and retain this manual as a perma-
nent record of your purchase to aid identification in the event of theft.
Model No.
Serial No.
(bottom_en_01)
The name plate is located on the bottom of the unit.
7
CLP-725 Owner’s Manual
NOTICE
To avoid the possibility of malfunction/ damage to the product,
damage to data, or damage to other property, follow the notices
below.
Handling
Do not use the instrument in the vicinity of a TV, radio,
stereo equipment, mobile phone, or other electric devices.
Otherwise, the instrument, TV, or radio may generate noise.
When you use the instrument along with an app on your
smart device such as a smartphone or tablet, we recommend
that you enable “Airplane Mode” on that device in order to
avoid noise caused by communication.
Do not expose the instrument to excessive dust or
vibrations, or extreme cold or heat (such as in direct
sunlight, near a heater, or in a car during the day) to prevent
the possibility of panel disfiguration, damage to the internal
components or unstable operation. (Verified operating
temperature range: 5° – 40°C, or 41° – 104°F.)
Do not place vinyl, plastic or rubber objects on the
instrument, since this might discolor the panel or keyboard.
In the case of a model with a polished finish, bumping the
surface of the instrument with metal, porcelain, or other
hard objects can cause the finish to crack or peel. Use
caution.
Maintenance
When cleaning the instrument, use a soft and dry/slightly
damp cloth. Do not use paint thinners, solvents, alcohol,
cleaning fluids, or chemical-impregnated wiping cloths.
In the case of a model with a polished finish, gently remove
dust and dirt with a soft cloth. Do not wipe too hard since
small particles of dirt can scratch the instrument's finish.
During extreme changes in temperature or humidity,
condensation may occur and water may collect on the
surface of the instrument. If water is left, the wooden parts
may absorb the water and be damaged. Make sure to wipe
any water off immediately with a soft cloth.
Saving data
Some of the data of this instrument (page 29) are retained
when the power is turned off. However, the saved data may
be lost due to some failure, an operation mistake, etc. Save
your important data onto an external device such as a
computer (page 29).
Information
About copyrights
Copying of the commercially available musical data
including but not limited to MIDI data and/or audio data is
strictly prohibited except for your personal use.
This product incorporates and bundles contents in which
Yamaha owns copyrights or with respect to which Yamaha
has license to use others’ copyrights. Due to copyright laws
and other relevant laws, you are NOT allowed to distribute
media in which these contents are saved or recorded and
remain virtually the same or very similar to those in the
product.
* The contents described above include a computer
program, Accompaniment Style data, MIDI data, WAVE
data, voice recording data, a score, score data, etc.
* You are allowed to distribute medium in which your
performance or music production using these contents is
recorded, and the permission of Yamaha Corporation is
not required in such cases.
About functions/data bundled with the
instrument
Some of the preset songs have been edited for length or
arrangement, and may not be exactly the same as the
original.
About this manual
The illustrations as shown in this manual are for
instructional purposes only, and may appear somewhat
different from those on your instrument.
The letters at the end of the model name (such as “B,” “PE”)
indicate the color or finish of the instrument. Since they
simply indicate the appearance, these letters are omitted in
this manual.
Windows is a registered trademark of Microsoft®
Corporation in the United States and other countries.
iPad and iPhone are trademarks of Apple Inc., registered in
the U.S. and other countries.
Android™ is a trademark of Google LLC.
The company names and product names in this manual are
the trademarks or registered trademarks of their respective
companies.
Tuning
Unlike an acoustic piano, this instrument does not need to
be tuned by an expert (although the pitch can be user-
adjusted to match other instruments). This is because the
pitch of digital instruments is always maintained perfectly.
8
CLP-725 Owner’s Manual
Table of Contents
PRECAUTIONS .................................... 5
About the Manuals ................................ 9
Included Accessories ............................. 9
Panel Controls and Terminals ............10
Basic Operations
Setting Up.............................................11
Key Cover ..................................................................11
Music Rest .................................................................11
Turning the Power On.............................................12
Auto Power Off Function........................................12
Using Headphones ...................................................13
Playing the Piano..................................14
Using the Pedals........................................................14
Turning the VRM Effect On/Off............................14
Intelligent Acoustic Control (IAC)........................15
Grand Expression Modeling...................................15
Turning the Operation Confirmation Sounds
On/Off........................................................................16
Changing the Touch Sensitivity .............................16
Using the Metronome..............................................17
Advanced Operations
Playing Various Musical Instrument
Sounds (Voices)....................................18
Selecting a Voice.......................................................18
Listening to the Demo Songs ..................................19
Adding Variations to the Sound (Reverb) ............20
Transposing the Pitch in Semitones ......................21
Fine-tuning the Pitch ...............................................21
Layering Two Voices (Dual mode) ........................22
Playing Duo...............................................................23
Song Playback and Practice .................24
Listening to 50 Preset Songs....................................24
Listening to Songs Loaded from the Computer ...24
Practicing a One-Hand Part....................................25
Playing Back Immediately from the First Note
(Quick Play) ..............................................................25
Recording Your Performance .............26
Recording Your Performance ................................ 26
Changing the Initial Settings of the Recorded Song
....................................................................................27
Deleting Recorded Data ..........................................27
Using with a Computer or a Smart
Device ................................................... 28
Using an App on Your Smart Device.................... 28
Playback/Recording of Audio Data (USB Audio
Interface) ................................................................... 28
Backing up Data and Initializing the
Settings................................................. 29
Data Maintained When Power is Turned Off...... 29
Saving User Song data to a computer ...................29
Initializing the Settings............................................ 29
Confirming the firmware version of this
instrument................................................................. 29
Appendix
Troubleshooting ..................................30
Glossary of Terms ................................30
Keyboard Stand Assembly...................31
Specifications .......................................34
Index.....................................................35
9
CLP-725 Owner’s Manual
Thank you for purchasing this Yamaha Digital Piano!
This instrument provides exceptionally high-quality sound
and expressive control for your playing enjoyment.
We recommend that you read this manual carefully so that you can fully take advantage of the
advanced and convenient functions of the instrument. We also recommend that you keep this
manual in a safe and handy place for future reference.
About the Manuals
This instrument has the following manuals.
Included Manuals
Owner’s Manual (this book)
Explains how to use the instrument.
Quick Operation Guide (separate
sheet)
Shows in chart form the functions assigned to the
buttons and the keyboard for quick
understanding.
Online Manuals (PDF)
Smart Device Connection Manual
Explains how to connect the instrument to a smart
device such as smartphone or tablet, etc.
Computer-related Operations
Includes instructions on connecting this
instrument to a computer, and operations related
to transferring Song data.
MIDI Reference
Contains the MIDI Data Format and MIDI
Implementation chart, as well as descriptions on
MIDI functions such as MIDI channel and Local
Control settings.
To obtain these materials, access the Yamaha
Downloads website, then enter the model name for
searching the desired files.
NOTE
For a general overview of MIDI and how you can effectively use it,
search for “MIDI Basics” (only in English, German, French and
Spanish) on the website above.
Included Accessories
Owner’s Manual (this book) x1
Quick Operation Guide (separate sheet) x1
“50 Classical Music Masterpieces” (music book) x1
Online Member Product Registration x1
•Warranty* x1
•AC adaptor* x1
•Power cord* x1
•Bench* x1
* May not be included depending on your particular
area. Please check with your Yamaha dealer.
Yamaha Downloads
https://download.yamaha.com/
Smart device app “Smart Pianist
With the specially developed “Smart Pianist”
app running on your smart device, you can
remotely control your digital piano for even
more convenience and flexibility. By
presenting various parameters on-screen, this
app allows you to make settings in a visual,
more intuitive manner. For more details on
“Smart Pianist,” refer to the following Yamaha
website.
https://www.yamaha.com/kbdapps/
The connection wizard of the “Smart Pianist”
helps you to connect this instrument to your
smart device properly. To start the Connection
Wizard, tap ” (Menu) located at the upper
left of the screen to open the Menu display,
and then tap “Instrument” → “Start
Connection Wizard.”
10
CLP-725 Owner’s Manual
Panel Controls and Terminals
[ ] (Standby/On) switch......................... page 12
For turning the power on or setting to standby.
[MASTER VOLUME] knob
For adjusting the volume of the entire sound.
[DEMO/SONG] button..................... pages 19, 24
For playing the Demo Songs and the Preset Songs.
[PIANO/VOICE] button............. pages 18, 20, 22
For selecting a single Voice, two Voices for layering or
a Reverb Type.
[METRONOME] button .......................... page 17
For starting or stopping the metronome.
[+R], [–L] buttons ................. pages 17, 18, 24, 25
In general, these are for selecting the next or
previous Voice.
During Song playback, these are for selecting the
next or previous Song, and (while holding down
[PLAY]) turning on/off the right-hand and left-
hand Parts individually.
During Metronome playback, these are for
increasing or decreasing the Tempo.
[REC] button............................................ page 26
For recording your keyboard performance.
[PLAY] button.......................................... page 26
For playing back the recorded performance.
[FUNCTION] ................................... pages 12, 21
Simultaneously holding both [DEMO/SONG] and
[PIANO/VOICE] and pressing a specified key allows
you to change various settings, including Auto Power
off function, Transpose parameters, etc.
[PHONES] jacks....................................... page 13
For connecting a set of standard stereo headphones.
[USB TO HOST] terminal ....................... page 28
For connecting to a computer or a smart device such
as an iPhone or iPad.
[TO PEDAL] jack ..................................... page 32
For connecting the pedal cord.
DC IN jack................................................ page 12
For connecting the AC adaptor.
Pedals ....................................................... page 14
For controlling expression and sustain, just as on an
acoustic piano.
Bottom
(Keyboard side)
Bottom
(Keyboard side)
Bottom
(Keyboard side)
Music braces
Music rest
11
CLP-725 Owner’s Manual
Basic Operations
Setting Up
To open the key cover:
Lift the cover slightly, then push and slide it to the
end.
To close the key cover:
Slide the cover toward you and gently lower the
cover over the keys.
CAUTION
Hold the cover with both hands when opening or closing it.
Do not release it until it is fully opened or closed. Be
careful to avoid catching fingers (yours or others,
especially children’s) between the cover and main unit.
Do not place objects, such as a piece of metal or paper, on
top of the key cover. Small objects placed on the key cover
may fall inside the unit when the cover is opened and may
be nearly impossible to remove. This could cause electric
shock, short circuit, fire or other serious damage to the
instrument.
To raise the music rest:
Music braces allow you to hold the pages of music
books in place.
CAUTION
Do not try to use the music rest in a half-raised position.
When lowering the music rest, do not release your hands
from the music rest until it is all the way down.
To lower the music rest:
Close the Music braces if they are open, and then
lower the music rest by following the instructions
below.
Key Cover
CAUTION
Be careful to avoid catching
your fingers when opening or
closing the cover.
Music Rest
1
3
2
Music braces
3
1
2
Music braces
Setting Up
12
CLP-725 Owner’s Manual
1. Connect the plugs of the AC adaptor in
the order shown in the illustration.
WARNING
Use the specified adaptor (page 34) only. The use of
other adaptors may result in irreparable damage to both
the adaptor and the instrument.
CAUTION
When setting up the product, make sure that the AC
outlet you are using is easily accessible. If some trouble
or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet.
NOTE
Follow this procedure in reverse order when disconnecting
the AC adaptor.
2. Turn down the [MASTER VOLUME]
knob to “MIN.”
3. Press the [ ](Standby/On) switch to
turn the power on.
The power indicator on the button lights up to
indicate the power is on.
To adjust the volume of the entire keyboard sound,
use the [MASTER VOLUME] dial while playing the
keyboard.
When you’re ready to turn the power to standby,
press the [ ] (Standby/On) switch again for a
second. The power indicator turns off.
CAUTION
Even when the [ ] (Standby/On) switch is in the standby
status, electricity is still flowing to the instrument at a
minimum level. When not using the instrument for an
extended period of time, be sure to unplug the power
cord from the wall AC outlet.
CAUTION
Do not use this instrument at a high volume level for a
long period of time, to avoid damaging your hearing.
NOTICE
Press only the [ ] (Standby/On) switch when turning the
power on. Any other operations, such as pressing the
keys, buttons or pedals may cause the instrument to
malfunction.
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function
that automatically turns the power off if the
instrument is not operated for approximately
30 minutes.
Default setting: Enabled
While holding down [DEMO/SONG] and
[PIANO/VOICE] simultaneously, press the A#0
key to enable the function or the A0 key to disable
it.
You can also disable the function when turning on
the power to the instrument.
While holding down the A-1 key (the lowest key,
press the [ ] (Standby/On) switch to turn the
instrument on. The [REC] indicator flashes three
times, indicating the Auto Power Off function has
been disabled.
Turning the Power On
AC outlet
AC adaptor
DC IN jack (page 10)
DC plug
Power cord
AC plug
The shape of the plug and outlet differ depending on the
locale.
2
3
Power
indicator
Auto Power Off Function
A#0 (Enable)
Lowest key
A0 (Disable)
Lowest key
Setting Up
13
CLP-725 Owner’s Manual
Since this instrument is equipped with two
[PHONES] jacks, you can connect two sets of
standard stereo headphones. If you are using only
one set of headphones, insert a plug into either
jack, which automatically shuts off the speakers
according to the default setting.
CAUTION
Do not use headphones at a high volume for an extended
period of time; doing so may cause hearing loss.
Using the headphone hanger
You can hang the headphones on this instrument.
For instructions on installing the headphone
hanger, refer to “Keyboard Stand Assembly” on
page 31.
NOTICE
Do not hang anything other than the headphones on the
hanger. Doing so may damage this instrument or the hanger.
Speaker On/Off setting
You can set whether the sound of this instrument is
always output from its built-in speaker or not.
While holding down [DEMO/SONG] and
[PIANO/VOICE] simultaneously, press one of the
D6 – E6 key.
Off (D6): The speaker will not sound.
On (D#6): The speaker will always sound regardless of
whether a set of headphones is connected or not.
Normal (E6): The speaker will sound only if
headphones are not connected. (This is the default
setting.)
NOTE
When this is set to “On,” Binaural Sampling and Stereophonic
Optimizer below are not effective.
Reproducing the Natural Sensation of
Sound Distance—Binaural Sampling
and Stereophonic Optimizer
This instrument features two advanced
technologies that allow you to enjoy exceptionally
realistic, natural sound, even when listening on
headphones.
Binaural Sampling (“CFX Grand” Voice only)
Binaural Sampling is a method that uses two
special microphones set at the ear position of a
performer and records the sound from a piano as it
would actually be heard. Listening to the sound
with this effect through headphones gives the
impression of being immersed in the sound, as if it
was actually emanating from the piano. Moreover,
you can enjoy the sound naturally for a long time
without ear fatigue. When the default Voice “CFX
Grand” (page 18) is selected, connecting the
headphones automatically enables the binaural
sampling sound.
Stereophonic Optimizer (Piano Voices other
than “CFX Grand”)
Stereophonic Optimizer is an effect which
reproduces the natural sound distance, like with
the sound of Binaural Sampling, even though you
are listening to it on headphones. When a piano
Voice other than “CFX Grand” is selected,
connecting the headphones automatically enables
the Stereophonic Optimizer.
Default setting: On
While holding down [PIANO/VOICE], press the
F#3 key to turn the function on or the F3 key to
turn the function off.
Using Headphones
PHONES
Standard stereo phone
plug
Bottom surface
F3 (Off)
C3
F#3 (On)
14
CLP-725 Owner’s Manual
Playing the Piano
Damper Pedal (Right)
Pressing this pedal will sustain notes longer.
Releasing this pedal immediately stops (damps)
any sustained notes. This pedal also features a
“half-pedal” function that creates partial sustain
effects, depending on how far down you press the
pedal.
Sostenuto Pedal (Center)
Pressing this pedal while holding the notes will
sustain the pressed notes (as if the Damper Pedal
had been pressed), but all subsequently played
notes will not be sustained. This makes it possible
to sustain a chord or single low note, for example,
while the other notes are played “staccato.”
Soft Pedal (Left)
Pressing this pedal will reduce the volume and slightly change the timbre of the
notes. The notes played before this pedal is pressed are not affected.
VRM (Virtual Resonance Modeling) technology accurately recreates the unique
resonance of an acoustic grand piano’s soundboard and strings. When you select
a piano Voice (page 18), pressing the damper pedal activates the VRM effect. For
details on VRM, see page 30.
While holding down [PIANO/VOICE], press the C#3 key to turn the function
on or the C3 key to turn the function off.
Using the Pedals
When you press the damper
pedal here, this note and the
notes you play before you release
the pedal sustain longer.
When you press the sostenuto
pedal here while holding the
note, the note will sustain as
long as you hold the pedal.
NOTE
If the damper pedal doesn’t
work, make sure that the pedal
cord is properly plugged into
the main unit (page 32).
Half-pedal function
This function allows you to vary
the sustain length depending
on how far the pedal is
pressed. The farther down you
press the pedal, the more the
sound sustains. For example, if
you press the damper pedal
and all notes you are playing
sound a bit murky and loud
with too much sustain, you can
release the pedal half way or
higher to decrease the sustain
(murkiness).
NOTE
While the sostenuto pedal is
held, the organ and strings
Voices sound continuously
without decay after the notes
have been released.
NOTE
When Jazz Organ Voice
(page 18) is selected,
pressing the left pedal
switches between fast/slow
rotation of the rotary speaker.
When the Vibraphone Voice
(page 18) is selected, the left
pedal switches Vibrato on and
off.
Turning the VRM Effe ct On/Off
Lowest key C3 (Off)
C#3 (On)
Default setting:
On
Playing the Piano
15
CLP-725 Owner’s Manual
With this function, the sound quality of this instrument is automatically adjusted
and controlled according to the overall volume. Even when the volume is low,
this lets you hear both low sounds and high sounds clearly.
To turn on/off IAC:
While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously,
press the C#2 key to turn the function on or the C2 key to turn the function off.
To adjust IAC Depth:
While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously,
press the D2 key to decrease the value, or the E2 key to increase.
The higher the value, the more clearly that low and high sounds are heard at
lower volume levels.
When a piano Voice (page 18) is selected, you can add Grand Expression
Modeling effects, which simulate the physical sound transitions of an actual
piano. When this feature is set to “Dynamic,” you can control extremely subtle
nuances in the performance and sound by changing your playing strength or
touch. When set to “Static,” the nuances are generally fixed. For details on Grand
Expression Modeling, see page 30.
While holding down [PIANO/VOICE], press the A#3 key to turn the function
on or the A3 key to turn the function off.
Intelligent Acoustic Control (IAC)
Default setting:
On
C#2 (On)
Lowest key
C2 (Off)
Setting range:
-3 – +3
Default setting:
0 (D#2)
Lowest key
D2 (Depth -1)
E2 (Depth +1)
D#2 (Default)
Grand Expression Modeling
Default setting:
Dynamic
A3 (Static)
A#3 (Dynamic)
Lowest key
Playing the Piano
16
CLP-725 Owner’s Manual
When a setup is changed using a button and key combination, an operation
sound (on, off, click, tempo value input) is sounded. This confirmation sound
can be enabled (on) or disabled (off) as desired.
While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously,
press the A#-1 key to turn the sounds on or the A-1 key to turn the sounds off.
You can specify the Touch Sensitivity (how the sound responds to the way you
play the keys).
While holding down [PIANO/VOICE], press one of the C6 – D#6 keys.
Turning the Operation Confirmation Sounds On/Off
Default setting:
On
Lowest key A-1 (Off)
A#-1 (On)
Changing the Touch Sensitivity
NOTE
This setting is disabled with
some Voices, such as an
organ sound.
Default setting:
Medium (C#6)
Key
Touch
Sensitivity
Description
C6 Soft Produces relatively high volume even with light playing strength.
C#6 Medium Standard Touch Sensitivity.
D6 Hard Requires strong playing to produce high volume.
D#6Fixed
The volume level does not change at all regardless of whether you
play the keyboard soft or hard.
C6 Highest key (C7)D6
C#6D#6
Playing the Piano
17
CLP-725 Owner’s Manual
The metronome feature is convenient for practicing with an accurate tempo.
To start or stop the Metronome, press [METRONOME].
Metronome setting
Voice confirmation of current Tempo value (in English)
While holding down [METRONOME], press the A-1 key (lowest key).
Selecting the Beat (time signature)
While holding down [METRONOME], press one of the C3 – F3 keys.
The first beat is accented with a bell sound and the rest with clicks. Default set is
0 (C3). In this setting, clicks sound in all beats.
Adjusting the Tempo
The Metronome tempo can be set from 5 to 280 beats per minute.
To increase or decrease the value by 1:
While holding down [METRONOME], press [+R] to increase or [–L] to decrease.
While the metronome is playing, press [+R] to increase or [–L] to decrease.
To increase or decrease the value by 10:
While holding down [METRONOME], press the D2 key to increase or the C2 key
to decrease.
To specify a numeric value:
While holding down [METRONOME], press the relevant C1 – A1 keys one by one
in order, and then release [METRONOME] to enter the value.
Resetting the value to the default (120)
While holding down [METRONOME], press [+R] and [–L] simultaneously, or
press the C#2 key. While the metronome is playing, press [+R] and [–L]
simultaneously.
Adjusting the Volume
While holding down [METRONOME], press the G0 key to increase the volume
or the F0 key to decrease. To reset to the default setting, press the F#0 key while
holding down [METRONOME].
Using the Metronome
22447
13 3056 56
9
80
C#3D#3
D3 E3 F3F0 A1G0Lowest key A-1 C1 C2 D2 C3
C#2 (Default setting)F#0 (Default setting)
Volume BeatTempoConfirming the
current Tempo
Key Beat
C3 0 (no accent)
C#32
D3 3
D#34
E3 5
F3 6
Setting range:
1 – 10
Default setting:
7 (F#0)
NOTE
A numeric value is read out
when a relevant key is
pressed.
If the entered value is outside
the setting range, it will be
ignored.
18
CLP-725 Owner’s Manual
Advanced Operations
Playing Various Musical Instrument Sounds (Voices)
To select “CFX Grand”:
Simply press [PIANO/VOICE].
To select another Voice:
After pressing [PIANO/VOICE], press [+R] or [L] to select the next or previous
Voi ce .
To select a specific Voice:
While holding down [PIANO/VOICE], press one of the C1 – A1 keys. For details
on which Voice is assigned to each key, see the list below.
Voice List
Selecting a Voice
NOTE
To hear the characteristics of
the Voices, play back the
Demo Songs (page 19).
Key Voice Name Voice description
C1
CFX Grand
Yamaha’s CFX flagship concert grand piano sound with a wide dynamic
range for maximum expressive control. Suitable for playing in any music
genre and style.
Binaural
CFX Grand
Yamaha’s CFX flagship concert grand piano sound sampled by Binaural
Sampling, the method optimized for headphone use. Listening this
through headphones gives the impression of being immersed in the
sound, as if it was actually emanating from the piano. This Voice is
selected automatically when headphones are connected.
C#1 Bösendorfer
The famed sound of the Vienna-made Bösendorfer full concert grand
piano. Its spacious sound evokes the size of the instrument, and is ideal
for expressing tenderness in compositions.
D1 Pop Grand
Bright piano sound. Good for clear expression and “cutting through”
other instruments in an ensemble.
D#1 Stage E.Piano
The sound of an electric piano using hammer-struck metallic “tines.”
Soft tone when played lightly, and an aggressive tone when played
hard.
E1 DX E.Piano
An electronic piano sound created by FM synthesis. Good for standard
popular music.
F1 Harpsichord
The definitive instrument for baroque music. Since harpsichord uses
plucked strings, there is no touch response. There is, however, a
characteristic additional sound when the keys are released.
F#1 Vibraphone
Vibraphone played with relatively soft mallets. The tone becomes more
metallic the harder you play.
G1 Pipe Organ
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for
sacred music from the Baroque period.
G#1 Jazz Organ
The sound of a “tonewheel” type electric organ. Often heard in jazz and
rock music.
A1 Strings
Stereo-sampled, large-scale strings ensemble with realistic reverb. Try
combining this Voice with piano in the Dual mode.
C#1D#1F#1G#1
C1 D1 E1 F1 G1 A1Lowest key
Playing Various Musical Instrument Sounds (Voices)
19
CLP-725 Owner’s Manual
Special individual Demo Songs are provided for all of the instrument Voices.
1. Press [DEMO/SONG] to start playback.
The Demo Song for the current Voice starts. During playback, the [PLAY] lamp
flashes at the current tempo.
Starting with the selected song, the playback of the Demo Songs will continue.
After the last demo song, the sequence then returns to the first Demo Song and
repeats until you stop it.
To change the Demo Song during playback:
Press [+R] or [–L] to change to the next or previous Demo Song.
To change to a specific Demo Song, simultaneously hold down [DEMO/SONG]
and press one of the C1 – A1 keys.
2. Press [DEMO/SONG] or [PLAY] to stop playback.
The [PLAY] lamp turns off.
Demo Song List
The Demo Songs excluding original Songs are short rearranged excerpts from the original
compositions. The original Demo Songs are Yamaha originals (© Yamaha Corporation).
Listening to the Demo Songs
NOTE
If you want to change the
playback tempo, see page 17.
Key Voic e Name Title Composer
C1
CFX Grand
Allegro de concierto Cis-Dur E. Granados
Binaural
CFX Grand
C#1 Bösendorfer Widmung S.566 R.253
F. Liszt /
R. Schumann
D1 Pop Grand Original
D#1 Stage E.Piano Original
E1 DX E.Piano Original
F1 Harpsichord
Concerto a cembalo obbligato, 2 violini, viola e
continuo No.7, BWV 1058
J. S. Bach
F#1 Vibraphone Original
G1 Pipe Organ Herr Christ, der ein'ge Gottes-Sohn, BWV 601 J. S. Bach
G#1 Jazz Organ Original
A1 Strings Original
Lowest key C1 A1
Playing Various Musical Instrument Sounds (Voices)
20
CLP-725 Owner’s Manual
This instrument features several Reverb Types that add extra depth and expression to the sound to create a
realistic acoustic ambience. The appropriate Reverb Type and Depth are called up automatically when you
select each of the Voices and Songs. For this reason, the Reverb Type need not be selected; however, you can
change it if desired.
To select a Reverb Type:
While holding down [PIANO/VOICE], press one of the C2 – E2 keys.
Reverb Type List
To adjust Reverb Depth:
While holding down [PIANO/VOICE], press the G2 key to decrease the value by
1 or the A2 key to increase the value by 1.
While holding down [PIANO/VOICE], press the G#2 key to reset the Reverb
Depth to the default setting, which is the most suitable value for the current
Voi ce .
Adding Variations to the Sound (Reverb)
Reverb in Dual Mode
(page 22)
An optimum reverb type for the
combination of Voices is
assigned automatically.
Key Reverb Type Description
C2 Recital Hall
Simulates the clear reverb sound you would hear in a medium-
sized concert hall for piano recitals.
C#2 Concert Hall
Simulates the gorgeous reverb sound you would hear in a large
concert hall for orchestral performances.
D2 Chamber
Suitable for playing chamber music; simulates the intimate
reverb sound you would hear in a spacious room, such as for
classical music recitals.
D#2Club
Simulates the vivid reverb sound you would hear in a live music
venue or a jazz club.
E2 Off No effect is applied.
Lowest key
A2 (Depth +1)
G#2 (Default)
G2 (Depth -1)
C#2D#2
C2 D2 E2
Reverb Type
Reverb Depth
Setting range:
0 (no effect) – 20 (maximum
depth)
1 / 1

Yamaha CLP-725 Manualul proprietarului

Categorie
Echipamente muzicale suplimentare
Tip
Manualul proprietarului