20
• During use keep the suction tube, suction
hose and nozzles away from your head to
prevent injuries.
• For longer use pull out at least 2/3 of the
cable length to awed overheating and
damage.
• The appliance fulfils the applicable German
and European electrical standards as well
as the radio interference suppression
regulation.
• Never use your vacuum cleaner for
vacuuming the building material (such as
fine sand, lime, cement dust etc.). Absorbed
building material can damage your
appliance.
• When you are using the vacuum cleaner
together for several hours, pull the
connecting cable to the end.
• Noise level: Lc < 78 dB(A)
CAUTION: Never use the vacuum cleaner
without the filters.
Vacuum cleaner use only for home and in the
inner rooms!
Do not use a vacuum cleaner in very dirty
places, it will immediately obstruct HEPA
filter!
Connection to the mains
supply
Check, please, whether the voltage stated on the
data plate comply with the data of your house
mains supply.
Supply cord
If the supply cord is damaged, it must be
replaced with the suitable cord, or a set for
coiling the cable, which you can get in the
nearest Gorenje’s service outlet.
If the mains cord is damaged, you must have it
replaced by Gorenje, a service centre authorised
by Gorenje or similarly qualified persons in order
to avoid a hazard.
Data on compliance with
european standards
Test for this type of appliance confirmed that it
complies with the following European directives:
• 2006/95/EEC Low voltage
• 93/68/EEC CE Marking
• 2004/108/EEC Directive on Electromagnetic
Compatibility – EMC
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
This guideline is the frame of a European-wide
validity of return and recycling on Waste
Electrical and Electronic Equipment.
Elimination of the appliances
and environment
If one day you decide to change your appliance,
or you just do not need it any more, think about
the environmental protection.
Vacuum cleaner assembling
Always remove the plug from the power supply
before fitting or removing accessories. Before
putting the appliance into service, please check if
all filters are inserted correctly.
ASSEMBLY OF THE SUCTION HOSE
• Insert the flexible suction hose into the
connection opening at the top of the
housing until you can feel it lock.
HOSE REMOVING
• To remove flexible hose from the vacuum
cleaner, press the buttons situated on the
flexible hose base, then pull to remove it
from the attachment point.
ROLLING THE CABLE OUT AND UP
• Pull out the cable to such a length that easy
working is ensured. Now connect the
appliance to the main supply. Press the
switch to activate the automatic rewinder
and hold on the mains plug for safety
reason.
FITTING TUBE WITH ACCESSORIES
AND USAGE
- Extend the telescopic tube to the desired
length by holding the button on the tube.
- Insert a flexible hose into telescopic tube.
- Fit a nozzle to the tube:
- Floor brush is appropriate for cleaning
bare floor and floor coverings.
- Sofa turbo brush is appropriate for
cleaning smooth and bare floor (couch,
sofa, carpeting).