PX Series Firmware Update Guide 1

PX Series Firmware Update Guide

Thank you for choosing a Yamaha product.

This guide explains how to update the PX series (PX10, PX8, PX5, and PX3) firmware.

■ Precautions (Please be sure to read this section first!)

・ The user assumes full responsibility for the update.

・ It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety, without

permission from the copyright owner.

・ The screen shots in this guide are for use with this update procedure only and may be different from the

actual screen shots.

・ The company names and product names in this document are the trademarks or registered trademarks of

■ Preparing for the update

http://www.yamahaproaudio.com/downloads/

PX Series Firmware Update Guide 2

■ Updating the PX series firmware

Described below are the procedures to update the PX series unit firmware.

Uncompress the compressed file you downloaded before proceeding.

the PX series.

The "FIRMWARE UPDATE" screen will be displayed.

To cancel updating, press any key except for the main knob, or turn off the power and remove the USB

flash drive.

CAUTION:

DO NOT OPERATE ANY CONTROL OF THE PX series unit (SWITCHES, KNOBS, ETC.) WHILE UPDATING THE

After the firmware has been loaded, the PX series automatically restarts.

PX Series Firmware Update Guide 3

After the update has finished and the PX series has been rebooted, the following screen will be displayed.