Yamaha PSR-E443 Manualul proprietarului

Categorie
Tastaturi MIDI
Tip
Manualul proprietarului
DIGITAL KEYBOARD
Setting UpReferenceAppendix Quick Guide
Owners Manual
EN
2
PSR-E443 Owner’s Manual
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply (adapter).
DO NOT connect this product to any power supply or adapter other
than one described in the manual, on the name plate, or specifically
recommended by Yamaha.
WARNING: Do not place this product in a position where anyone
could walk on, trip over, or roll anything over power or connecting
cords of any kind. The use of an extension cord is not recommended!
If you must use an extension cord, the minimum wire size for a 25’
cord (or less ) is 18 AWG. NOTE: The smaller the AWG number, the
larger the current handling capacity. For longer extension cords, con-
sult a local electrician.
This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is
used, please observe all safety markings and instructions that accom-
pany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at
the time of printing. However, Yamaha reserves the right to change or
modify any of the specifications without notice or obligation to update
existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound levels
that could cause permanent hearing loss. DO NOT operate for long
periods of time at a high volume level or at a level that is uncomfort-
able. If you experience any hearing loss or ringing in the ears, you
should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.
Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be dealer
assembled or installed. Please make sure that benches are stable and
any optional fixtures (where applicable) are well secured BEFORE
using.
Benches supplied by Yamaha are designed for seating only. No other
uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a
function or effect works (when the unit is operating as designed) are
not covered by the manufacturer’s warranty, and are therefore the
owners responsibility. Please study this manual carefully and consult
your dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and envi-
ronmentally friendly. We sincerely believe that our products and the
production methods used to produce them, meet these goals. In keep-
ing with both the letter and the spirit of the law, we want you to be
aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of bat-
tery is approximately five years. When replacement becomes necessary,
contact a qualified service representative to perform the replacement.
This product may also use “household” type batteries. Some of these
may be rechargeable. Make sure that the battery being charged is a
rechargeable type and that the charger is intended for the battery being
charged.
When installing batteries, never mix old batteries with new ones, and
never mix different types of batteries. Batteries MUST be installed cor-
rectly. Mismatches or incorrect installation may result in overheating and
battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all bat-
teries away from children. Dispose of used batteries promptly and as
regulated by the laws in your area. Note: Check with any retailer of
household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some rea-
son its useful life is considered to be at an end, please observe all
local, state, and federal regulations that relate to the disposal of prod-
ucts that contain lead, batteries, plastics, etc. If your dealer is unable
to assist you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The model
number, serial number, power requirements, etc., are located on this
plate. You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this manual
as a permanent record of your purchase.
Model
Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
92-BP (bottom)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications not
expressly approved by Yamaha may void your authority, granted by
the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part 15 for Class "B" digital
devices. Compliance with these requirements provides a reason-
able level of assurance that your use of this product in a residential
environment will not result in harmful interference with other elec-
tronic devices. This equipment generates/uses radio frequencies
and, if not installed and used according to the instructions found in
the users manual, may cause interference harmful to the operation
of other electronic devices. Compliance with FCC regulations does
not guarantee that interference will not occur in all installations. If
this product is found to be the source of interference, which can be
determined by turning the unit "OFF" and "ON", please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please con-
tact Yamaha Corporation of America, Electronic Service Division,
6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
FCC INFORMATION (U.S.A.)
3
PSR-E443 Owner’s Manual
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not
be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human
health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or
the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask
for the correct method of disposal.
(weee_eu_en_01)
For AC Power Adaptor
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should
not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with
your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human
health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service
or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the
correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical
involved.
(weee_battery_eu_en_01)
For PSR-E443
The model number, serial number, power requirements, etc., may be
found on or near the name plate, which is at the bottom of the unit.
You should note this serial number in the space provided below and
retain this manual as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
(bottom_en_01)
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den
ar ansluten till vägguttaget, även om själva apparaten har stängts av.
ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt,
sålænge netledningen sidder i en stikkontakt, som er tændt — også
selvom der er slukket på apparatets afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko
laitetta verkosta.
(standby)
Entsorgung leerer Batterien
(nur innerhalb Deutschlands)
Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Batterien
oder Akkumulatoren dürfen nicht in den Hausmüll. Sie können bei
einer Sammelstelle für Altbatterien bzw. Sondermüll abgegeben
werden. Informieren Sie sich bei Ihrer Kommune.
(battery)
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park, Calif.
90620
Telephone : 714-522-9011
Type of Equipment : Digital Keyboard
Model Name : PSR-E443
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including
interference that may cause undesired operation.
See user manual instructions if interference to radio reception is
suspected.
* This applies only to products distributed by
YAMAHA CORPORATION OF AMERICA.
(FCC DoC)
4
PSR-E443 Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the
following:
Do not place the power cord near heat sources such as heaters or radiators. Also,
do not excessively bend or otherwise damage the cord, or place heavy objects on
it.
Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
Use the specified adaptor (page 65) only. Using the wrong adaptor can result in
damage to the instrument or overheating.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
This instrument contains no user-serviceable parts. Do not open the instrument
or attempt to disassemble or modify the internal components in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, place on it any containers (such as vases, bottles or glasses)
containing liquids which might spill into any openings. If any liquid such as
water seeps into the instrument, turn off the power immediately and unplug the
power cord from the AC outlet. Then have the instrument inspected by qualified
Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit. A burning item may fall
over and cause a fire.
Follow the precautions below. Failure to do so might result in explosion, fire,
overheating or battery fluid leakage.
- Do not tamper with or disassemble batteries.
- Do not dispose of batteries in fire.
- Do not attempt to recharge batteries that are not designed to be charged.
- Keep the batteries separate from metallic objects such as necklaces, hairpins,
coins, and keys.
- Use the specified battery type (page 13) only.
- Use new batteries, all of which are the same type, same model, and made by
the same manufacturer.
- Always make sure all batteries are inserted in conformity with the +/- polarity
markings.
- When the batteries run out, or if the instrument is not to be used for a long
time, remove the batteries from the instrument.
- When using Ni-MH batteries, follow the instructions that came with the
batteries. Use only the specified charger device when charging.
Keep batteries away from small children who might accidentally swallow them.
If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid
should come in contact with your eyes, mouth, or skin, wash immediately with
water and consult a doctor. Battery fluid is corrosive and may possibly cause loss
of sight or chemical burns.
When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. (If you are using batteries,
remove all batteries from the instrument.) Then have the device inspected by
Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
Do not place the instrument in an unstable position where it might accidentally
fall over.
Before moving the instrument, remove all connected cables, to prevent damage
to the cables or injury to anyone who might trip over them.
Power supply/AC power adaptor
Do not open
Water warning
Fire warning
Battery
If you notice any abnormality
Power supply/AC power adaptor
Location
DMI-5 1/2
5
PSR-E443 Owner’s Manual
When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug the power
cord from the wall AC outlet.
Use only the stand specified for the instrument. When attaching the stand or rack,
use the provided screws only. Failure to do so could cause damage to the internal
components or result in the instrument falling over.
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all components,
set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the instrument to set the
desired listening level.
Do not insert a finger or hand in any gaps on the instrument.
Never insert or drop paper, metallic, or other objects into the gaps on the panel or
keyboard. This could cause physical injury to you or others, damage to the
instrument or other property, or operational failure.
Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
Make sure to discard used batteries according to local regulations.
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.
Handling and Maintenance
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.
When you use the instrument along with an application on your iPad, iPhone or iPod touch, we recommend that you set “Airplane Mode” to “ON” on that device in order to
avoid noise caused by communication.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the
possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Saving data
Some data items (page 34) are automatically saved as backup data in the internal memory even if you turn the power off. Saved data may be lost due to malfunction or incorrect
operation. Save important data to external device such as a USB flash memory (page 56).
To protect against data loss through media damage, we recommend that you save your important data onto two USB flash memories.
Information
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others' copyrights.
Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of
such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON'T MAKE, DISTRIBUTE OR
USE ILLEGAL COPIES.
About functions/data bundled with the instrument
Some of the preset songs and the optional songs have been edited for length or arrangement, and may not be exactly the same as the original.
About this manual
The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument.
iPad, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
Connections
Handling caution
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
DMI-5 2/2
6
PSR-E443 Owner’s Manual
Quick Guide Reference AppendixSetting Up
Table of Contents
Special Features ..............................................................6
Compatible Format and Functions ...................................8
Included Accessories .......................................................8
About the Manuals ...........................................................9
Setting Up
Panel Controls and Terminals 10
Setting Up 12
Power Requirements......................................................12
Connecting Headphones or External Audio Equipment
...14
Connecting a Footswitch to the [SUSTAIN] jack............14
Basic Operations 15
Turning the Power On/Off ..............................................15
Auto Power Off Function ................................................15
Selecting Operations......................................................15
Display Items 16
Quick Guide
Try Playing a Variety of Instrument Voices 17
Selecting a Main Voice...................................................17
Playing the “Grand Piano”..............................................17
Layering a Dual Voice ....................................................18
Playing a Split Voice in the Left Hand area....................18
Using the Metronome.....................................................19
Adding Harmony ............................................................20
Creating Arpeggios 21
Triggering the Arpeggio..................................................21
Changing the Arpeggio Type .........................................21
Creating Original Sounds via the Knobs 22
Selecting a Knob Effect Combination.............................22
Applying the Filter to the Main Voice..............................22
Playing Styles 23
Using the Music Database .............................................23
Playing with Patterns Like a DJ! 24
Playing Songs25
Listening to a Demo Song..............................................25
Selecting and Playing Back a Song ...............................25
Song Fast Forward, Fast Reverse, and Pause..............26
A-B Repeat ....................................................................26
Turning Each Track On/Off ............................................26
Using the Song Lesson Feature 27
Three Types of Song Lesson.........................................27
Practicing with Song Lesson..........................................27
Making Practice Perfect—Repeat & Learn ....................28
Playing an External Audio Device with the Built-in Speakers
29
Using the Melody Suppressor........................................29
Recording Your Performance 30
Track Structure of a Song ..............................................30
Quick Recording ............................................................30
Recording to a Specified Track......................................31
Clearing a User Song.....................................................32
Clearing a Specified Track from a User Song................32
Memorizing Your Favorite Panel Settings33
Memorizing Panel Settings to the Registration Memory
...33
Recalling Panel Settings from the Registration Memory
..33
Using with a Computer or iPad/iPhone 34
Connecting to a computer..............................................34
Connecting an iPad/iPhone ...........................................34
Backup and Initialization 34
Backup Parameters .......................................................34
Initialization ....................................................................34
Play a Variety of
Instrument Voices
Page 17
The instrument voice that sounds
when you play the keyboard can be
changed to violin, flute, harp, or
any of an extensive range of
voices.
Arpeggio Function
Page 21
Similar to the arpeggio functions
provided on some synthesizers,
this function automatically pro-
duces arpeggios (broken chords)
when you simply play the appro-
priate notes on the keyboard.
Convenient Melody
Suppressor
Page 29
When the sound of an external
audio device is output through this
instrument, you can cancel or
lower the volume of the melody
part of stereo playback with this
function, and play the melody part
yourself.
Special Features
7
PSR-E443 Owner’s Manual
Quick GuideReferenceAppendix Setting Up
Reference
Handy Performance Features 35
Selecting a Reverb Type................................................35
Selecting a Chorus Type................................................35
Pitch Controls—Transpose ............................................36
Pitch Controls—Fine Tuning ..........................................36
Pitch Controls—the PITCH BEND wheel .......................36
Calling Up Optimum Panel Settings
—One Touch Setting (OTS).......................................36
Changing the Touch Response of the Keyboard ...........37
Selecting an EQ Setting for the Best Sound ..................37
Scale Tuning 38
Selecting Scale ..............................................................38
Setting the Base Note for Each Scale............................38
Tuning Each Note to Create an Original Scale ..............39
Voice Settings40
Selecting a Dual Voice ...................................................40
Selecting a Split Voice ...................................................40
Voice Editing ..................................................................40
Parameters Assigned to the Knobs 41
Arpeggio Settings43
Synchronizing an Arpeggio to Song/Style/Pattern
Playback—Arpeggio Quantize ...................................43
Holding the Arpeggio Playback via the Footswitch ........43
Styles (Auto Accompaniment) and Patterns 44
Style Variations—Sections.............................................44
Synchro Stop..................................................................45
Turning Each Track Of Style On/Off...............................45
Pattern Variations—Sections .........................................46
Pattern Retrigger Function .............................................46
Changing the Tempo......................................................46
Tap Start ........................................................................46
Adjusting the Volume of the Style or Pattern .................47
Setting the Split Point.....................................................47
Playing Chords Without Style Playback.........................47
Chord Types for Style Playback.....................................48
Looking Up Chords Using the Chord Dictionary ............49
Song Settings50
BGM (Background Music) Playback ..............................50
Random Song Playback ................................................50
Tempo Setting of the Song ............................................51
Tap Start ........................................................................51
Song Volume .................................................................51
Melody Voice Setting of the Preset Song ......................51
The Functions 52
Basic Procedure in the Function Display .......................52
USB Flash Memory Operations 56
Connecting a USB Flash Memory..................................57
Formatting a USB Flash Memory...................................58
Saving User Data to a USB Flash Memory....................59
Saving a User Song as SMF to a USB Flash Memory...60
Loading User Data from a USB Flash Memory..............60
Loading a Style File .......................................................61
Deleting a User File in the USB Flash Memory..............62
Deleting a SMF File in the USB Flash Memory..............62
Exiting from a File Control display..................................63
Appendix
Troubleshooting ............................................................. 64
Specifications................................................................. 65
Index .............................................................................. 66
Play Along with Styles
Page 23
The auto-accompaniment Styles
provide the equivalent of a full
backing band covering a wide vari-
ety of music genres. Select a Style
that matches the music you want to
play, or experiment with new
Styles to expand your musical
horizons.
Create New Sounds
Page 22
By adjusting just two knobs you
can add varying degrees of distor-
tion, or other characteristics to the
sound to enhance it subtly or
change it dramatically.
Try playing like a DJ by
using the Patterns!
Page 24
The Pattern function lets you per-
form like a DJ. Use the Track Con-
trol to try out various instrument
combinations, and play with the
Knobs to create various new
sounds.
049
EuTrance
8
PSR-E443 Owner’s Manual
Setting Up
Included Accessories
• Owner’s Manual (this book)
• Data List
• AC Power Adaptor
*1
• Music Rest
• Online Member Product Registration
*2
*1: May not be included depending on your particular locale. Check with your Yamaha dealer.
*2: The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.
Compatible Format and Functions
GM System Level 1
“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible
music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer.
The GM mark is affixed to all software and hardware products that support GM System Level.
XGlite
As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation for-
mat. Naturally, you can play back any XG song data using an XGlite tone generator. However, keep in
mind that some songs may play back differently compared to the original data, due to the reduced set of
control parameters and effects.
USB
USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with
peripheral Devices. It allows “hot swapping” (connecting peripheral devices while the power to the
computer is on).
STYLE FILE
The Style File Format is Yamaha’s original style file format which uses a unique conversion system to
provide high-quality automatic accompaniment based on a wide range of chord types.
About audio files
This instrument does not feature audio file playback or audio recording. Also, audio signals created via your keyboard per-
formance cannot be transferred to the computer or iPad/iPhone even if one of them is connected to the USB [TO HOST]
terminal of this instrument.
Insert the music rest
into the slots as
shown.
Music Rest
9
PSR-E443 Owner’s Manual
Setting Up
About the Manuals
This instrument has the following documents and instructional materials.
Included Documents
Owner’s Manual (this book)
• Setting Up Please read this section first.
• Quick Guide This section explains how to use the basic functions. Refer to this section while
playing the instrument.
• Reference This section explains how to make detailed settings for the various functions of
the instrument.
• Appendix This section includes troubleshooting information and specifications.
Data List
Contains various important preset content lists such as those of Voices, Styles, Patterns and Effects.
Online Materials (from Yamaha Downloads)
MIDI Reference
Contains MIDI related information such as MIDI Data Format and the MIDI Implementation Chart.
MIDI Basics (only in English, French, German and Spanish)
Contains basic explanations about MIDI.
Computer-related Operations
Includes instructions on connecting this instrument to a computer, and operations related to transferring song
data.
iPhone/iPad Connection Manual
Explains how to connect the instrument to smart devices, such iPhone, iPad, etc.
To obtain these manuals, access the Yamaha Downloads. Select your country, enter “PSR-E443” to the Model
Name box, then click [SEARCH].
Yamaha Downloads http://download.yamaha.com/
Online Materials (for Yamaha Online members)
Song Book (only in English, French, German, Spanish and Japanese)
Contains music scores for the preset Songs (excluding the Demo Songs) of this instrument and the optional
Songs
Song Data
Contains the data of 70 Songs that can be played back with this instrument and/or used for the Song Lesson
(Page 27).
After completing the user registration at the website below, you can download the Song Book and the Song
Data free of charge.
Yamaha Online Member https://member.yamaha.com/
You will need the PRODUCT ID on the sheet (“Online Member Product Registration”) packaged with this
manual in order to fill out the User Registration form.
* The downloaded Song data can be played back by transferring data from the computer to the instrument or saving
data to the USB flash memory. For instructions on Song playback, refer to “Selecting and Playing Back a Song” on
page 25.
10
PSR-E443 Owner’s Manual
Setting Up
Panel Controls and Terminals
Front Panel
q [MASTER VOLUME] control ................Page 15
w PITCH BEND wheel..............................Page 36
e [ ] (Standby/On) switch ....................Page 15
r LIVE CONTROL section
[ASSIGN] button ...............................Page 22
[A] and [B] knobs .............................Page 22
t [DEMO] button......................................Page 25
y [LESSON] button..................................Page 27
u [REC] button.........................................Page 30
i [METRONOME] button.........................Page 19
o [TEMPO/TAP] button............................Page 46
!0 [TRANSPOSE] button ..........................Page 36
!1 [MELODY SUPPRESSOR] button........Page 29
!2 [PORTABLE GRAND] button...............Page 17
!3 VOICE CONTROL section
[SPLIT] button...................................Page 18
[DUAL] button ...................................Page 18
[HARMONY] button ..........................Page 20
[ARPEGGIO] button..........................Page 21
!4 Playback Control buttons
When the [PATTERN] lamp is turned on:
................................Pages 24 and 46
When the [SONG] lamp is turned on:
..............................................Page 26
When the [STYLE] lamp is turned on:
.........................Pages 23, 44, and 45
GrandPno
001
001
e
r
t y u i
o
!0 !1
!3
w
!2
!4 !5
@5
q
Front Panel
Display (page 16)
036
(C1)
048
(C2)
060
(C3)
072
(C4)
As illustrated above, each note of the keyboard has a specific note number and name (e.g.,
036/C1), which is used in making various settings, such as Split Point.
Setting Up
11
PSR-E443 Owner’s Manual
Panel Controls and Terminals
Setting Up
!5 [TRACK CONTROL] buttons
When the [PATTERN] lamp is turned on:
..............................................Page 24
When the [SONG] lamp is turned on:
..............................................Page 26
When the [STYLE] lamp is turned on:
..............................................Page 45
!6 [PATTERN] button ................................Page 24
!7 [SONG] button ......................................Page 25
!8 [STYLE] button .....................................Page 23
!9 [VOICE] button .....................................Page 17
@0 [MUSIC DATABASE] button.................Page 23
@1 [CATEGORY] buttons...........................Page 15
@2 [REGIST MEMORY] buttons ................Page 33
@3 [FUNCTION] button..............................Page 52
@4 Number buttons [1]–[9], [-/NO],
[0/EXECUTE] and [+/YES] buttons .....Page 15
@5 Drum illustrations for the Drum Kit....Page 17
These indicate the drum or percussion instrument assigned to
the corresponding keys (in the case of “Standard Kit 1,” shown
in the Drum Kit List of the separate Data List).
Rear Panel
@6 USB [TO HOST] terminal*....................Page 54
USB [TO DEVICE] terminal .................Page 56
@7 [SUSTAIN] jack .....................................Page 14
@8 [AUX IN] jack ........................................Page 29
@9 [PHONES/OUTPUT] jack .....................Page 14
#0 Power supply jack................................Page 12
* For connecting to a computer. For details, refer to “Computer-
related Operations” (page 9). When connecting, use an AB type
USB cable of less than 3 meters. USB 3.0 cables cannot be
used.
!6
!7 !8 !9 @1
@4
@3
@0
@2
@6
@7 @8
@9 #0
Rear Panel
Style List (Data List) Voice List (Data List)
Pattern List (Data List)
Dial (page 15)
Song List (Data List)
“Press & Hold” symbol
By holding down one of the
buttons having this symbol, you
can call up an alternate function,
other than the one called up
when simply pressing.
084
(C5)
096
(C6)
12
PSR-E443 Owner’s Manual
Setting Up
Setting Up
Power Requirements
Although the instrument will run either from an
optional AC adaptor or batteries, Yamaha recom-
mends use of an AC adaptor whenever possible. An
AC adaptor is more environmentally friendly than bat-
teries and does not deplete resources.
Using an AC Power Adaptor
1 Make sure that the power of the instrument is off
(display is blank, except for notation staff).
2 Connect the AC adaptor to the power supply jack.
3 Plug the AC adaptor into an AC outlet.
Notice for the AC adaptor
Depending on your particular locale, the AC adaptor
having a separable plug should be used. In this case,
make sure to follow the explanations below for your
safety.
If the plug is accidentally removed from the AC
adaptor
Without touching the metallic section, slide the plug
into place as shown below then push it in completely
until you hear the click sound.
• Use the specified adaptor (page 65) only. Using the
wrong adaptor can result in damage to the instrument
or overheating.
• This adaptor is for indoor use only. Do not expose the
instrument to rain, use it near water or in damp or wet
conditions, or use it to hold any containers (such as
vases, bottles or glasses) containing liquids which
might spill into any openings.
• When setting up the product, make sure that the AC
outlet you are using is easily accessible. If some trou-
ble or malfunction occurs, immediately turn off the
power switch and disconnect the plug from the outlet.
Even when the power switch is turned off, electricity is
still flowing to the product at the minimum level. When
you are not using the product for a long time, make
sure to unplug the power cord from the wall AC outlet.
AC outlet
AC power
adaptor
3
2
• Make sure to keep the plug attached to the AC adaptor.
Using the plug alone can cause electric shock or fire.
• Never touch the metallic section when attaching the plug.
To avoid electric shock, short circuit or damage, also be
careful that there is no dust between the AC adaptor and
plug.
Slide the plug as
indicated.
The shape of the
plug differs depend-
ing on locale.
13
PSR-E443 Owner’s Manual
Setting Up
Setting Up
Using Batteries
This instrument requires six “AA” size, Alkaline
(LR6)/Manganese (R6) batteries, or rechargeable
nickel-metal hydride batteries (rechargeable Ni-MH
batteries). The Alkaline batteries or rechargeable Ni-
MH batteries are recommended for this instrument,
since other types may result in poorer battery perfor-
mance.
Installing the batteries
1 Make sure that the power of the instrument is off
(display is blank, except for notation staff).
2 Open the battery compartment cover located on the
instrument’s bottom panel.
3 Insert the six new batteries, being careful to follow
the polarity markings on the inside of the compart-
ment.
4 Replace the compartment cover, making sure that it
locks firmly in place.
When battery power becomes too low for proper oper-
ation, the volume may be reduced, the sound may be
distorted, and other problems may occur. When this
happens, make sure to replace all batteries with new
ones or already-recharged ones.
Setting the battery type
After installing the new batteries then turning the
power on, make sure to set the Battery Type to
Rechargeable type or not. For details, refer to page 55.
Checking the power status on the
display
Power source on the display
You can confirm the power source at the left corner of
the display.
When is shown, the power is supplied from the
AC power adaptor. When is shown, the power is
supplied from the batteries. When the AC power adap-
tor is connected with the batteries installed, the power
is supplied from the AC power adaptor and the
indication is shown.
Remaining battery power indication
You can confirm the approximate amount of remain-
ing battery power at the top left of the display.
• When using Ni-MH batteries, follow the instructions that
came with the batteries. Use only the specified charger
device when charging.
• Connecting or disconnecting the power adaptor with bat-
teries installed may turn the power off, resulting in loss of
data being recorded or transferred at the time.
• This instrument cannot charge the batteries. Use only the
specified charger device when charging.
• Power will be automatically drawn from the AC adaptor if an
AC adaptor is connected while batteries are installed in the
instrument.
• Failure to set the Battery Type may shorten the amount of
the battery life. Make sure to set the Battery Type correctly.
Indicates that the power will be turned off
immediately. When rechargeable batteries are
used, this icon flashes before the power is
turned off.
Indicates that remaining power is insufficient
for operation. Before the power runs out,
replace all the batteries with new ones, or fully
recharged ones (when using rechargeable
types). Note that the instrument may not work
properly, including unusually soft volume and
poor sound quality when remaining power
becomes low.
Indicates that the remaining power is suffi-
cient.
NOTE
Only one of these is shown.
GrandPno
14
PSR-E443 Owner’s Manual
Setting Up
Setting Up
Connecting Headphones or
External Audio Equipment
Any pair of stereo headphones with a 1/4” stereo
phone plug can be plugged in here for convenient
monitoring. The speakers are automatically shut off
when a plug is inserted into this jack.
The [PHONES/OUTPUT] jack also functions as an
external output. You can connect the [PHONES/OUT-
PUT] jack to a computer, keyboard amplifier, stereo
system, mixer, tape recorder, or other line-level audio
device to send the instrument’s output signal to that
device.
Connecting a Footswitch to the
[SUSTAIN] jack
You can produce a natural sustain as you play by
pressing an optional Footswitch plugged into the
[SUSTAIN] jack. Make sure that the footswitch plug
is properly connected to the [SUSTAIN] jack before
turning on the power.
Do not use the instrument/device or headphones for a long
period of time at a high or uncomfortable volume level,
since this can cause permanent hearing loss. If you experi-
ence any hearing loss or ringing in the ears, consult a phy-
sician.
• Before connecting the instrument to other electronic com-
ponents, set all volume levels to the minimum, then turn
off the power for all components.
• When the instrument’s sound is output to an external
device, first turn on the power to the instrument, then to
the external device. Reverse this order when you turn the
power off.
• The sustain function does not affect split voices (page 18).
• Do not press the footswitch while turning the power on. Doing
this changes the recognized polarity of the footswitch, result-
ing in reversed footswitch operation.
NOTE
15
PSR-E443 Owner’s Manual
Setting Up
Basic Operations
Turning the Power On/Off
Turn down the MASTER VOLUME control to “MIN”
then press the [ ] (Standby/On) switch to turn on the
power. While playing the keyboard, adjust the MAS-
TER VOLUME control. To turn off the power, press
the [ ] (Standby/On) switch again for a second.
Auto Power Off Function
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function that
automatically turns the power off if the instrument is
not operated for a specified period of time. The amount
of time that will elapse before the power is automati-
cally turned off is set by default to 30 minutes.
To disable the Auto Power Off function:
Turn off the power, then press the [ ] (Standby/On)
switch to turn on the power while holding down the
lowest key.
You can set the time that elapses before Auto Power
Off is executed. For details, refer to the Function List
(page 55).
Selecting Operations
Before operating the instrument, it may be helpful to
familiarize yourself with the basic controls below that
are used to select items and change values.
Dial
Rotate the dial clockwise to
increase the value, or counter-
clockwise to decrease the
value.
Number buttons
Use the Number buttons to directly enter an item or
value. For numbers that start with one or two zeroes,
the first zeroes can be omitted.
[-/NO] and [+/YES] buttons
Press the [+/YES] button briefly to increase the value by
1, or press the [-/NO] button briefly to decrease the value
by 1. Press and hold either button to continuously increase
or decrease the value in the corresponding direction.
CATEGORY buttons
Use these buttons to jump to the first
Voice, Style, or Song in the next or
previous Category, and call up the next
or previous Function sequentially.
• When using a power adaptor, even when the power is off, a
small amount of electricity is still being consumed by the
instrument. When you are not using the instrument for a
long time, make sure to unplug the AC power adaptor from
the wall AC outlet.
Generally, the data and settings are maintained even when the
power is turned off. For details, see page 34.
• Depending on the instrument status, the power may not
turn off automatically, even after the elapse of the specified
period of time. Always turn off the power manually when
the instrument is not in use.
NOTE
• When the instrument is not operated for a specified period
of time while connected to an external device such as an
amplifier, speaker or computer, make sure to follow the
instructions in the Owner’s Manual to turn off the power to
the instrument and the connected devices, in order to pro-
tect the devices from damage. If you do not want the
power to turn off automatically when a device is con-
nected, disable Auto Power Off.
In most procedures described throughout this owner’s
manual the dial is recommended for selection simply
because it is the easiest and most intuitive selection
method. Please note however, that most items or values
that can be selected using the dial can also be selected
using the [+/YES] and [-/NO] buttons.
IncreaseDecrease
Press number buttons
[0], [0], [3].
Example: Selecting Voice 003,
Bright Piano.
Press briefly to
increase.
Press briefly to
decrease.
16
PSR-E443 Owner’s Manual
Setting Up
Display Items
The display shows all the current settings of the Song, Style Pattern, Voice and other
related functions.
GrandPno
001
001
This area indicates the on/off status of
each function. Each indication is
shown when the corresponding func-
tion is turned on.
Page 18
Page 18
Page 20
Page 21
Page 37
Page 23
Page 45
Page 38
Page 29
On/off status
Normally this indicates the notes you play.
When the Song Lesson function is used, this
indicates the current notes and chord of play-
back. When the Dictionary function is used,
this indicates the notes of the chord you specify.
Notation
• Any notes occurring below or above the staff are
indicated by “8va.
• For a few specific chords, not all notes may be
shown, due to space limitations in the display.
NOTE
Indicates the source from which this
instrument obtains power, AC power
adaptor or batteries. (Page 13)
Appears when USB flash memory is
connected to this instrument. (Page 56)
Power source status
USB connection status
Indicates the current beat of playback. (Page 25)
Indicates the parameters currently assigned to the
Knobs. (Page 22)
Indicates the Function number when the [FUNC-
TION] button is pressed, or the current Measure
number during playback of a Song, Style or Pattern.
Indicates the chord which is being played on the key-
board (Page 23) or specified via Song playback.
Indicates the on/off status of the current
Song, Style or Pattern. (Pages 24, 30,
45)
Beat
Knob assignment
FUNCTION and MEASURE
Chord
Track status
001
PSR-E443 Owner’s Manual
17
Quick Guide
Try Playing a Variety of Instrument Voices
In addition to piano, organ, and other “standard” keyboard instruments, this instru-
ment has a large range of voices that includes guitar, bass, strings, sax, trumpet,
drums and percussion, and even sound effects—giving you a wide variety of musical
sounds.
1
Press the [VOICE] button.
The Voice number and name will be shown.
For details, refer to the front panel or the Voice
List of the separate Data List.
2
Use the dial to select the desired Voice.
3
Play the keyboard.
Preset Voice Types
When you want to reset various settings to default and
simply play a Piano sound, press the [PORTABLE
GRAND] button.
The Voice number is set to 001 Grand Piano and the
settings such as Dual and Split are turned off automat-
ically.
Selecting a Main Voice
001–234 Instrument Voices.
235–258
(Drum Kit)
Various drum and percussion sounds are
assigned to individual keys. Details on assign-
ing instruments to keys are provided in the
Drum Kit List of the separate Data List.
259–298 Used for arpeggio performance (page 21).
299–755 XGlite Voices.
000
Selecting this automatically calls up the most
suitable Voice for the current Style, Song or
Pattern. For details, see page 36.
GrandPno
001
Appears after the [VOICE]
button is pressed.
Voice name
Voice number
Flute
134
Select 134 Flute
Playing the “Grand Piano”
Quick Guide
Try Playing a Variety of Instrument Voices
PSR-E443 Owner’s Manual
18
Quick Guide
In addition to the Main Voice, you can layer a differ-
ent Voice over the entire keyboard as a “Dual Voice.
1
Press the [DUAL] button to turn Dual on.
2
Press the [DUAL] button again to exit
from Dual.
Although turning on Dual will select a Dual Voice
suitable for the current Main Voice, you can easily
select a different Dual Voice (page 40).
By dividing the keyboard into the two separate areas,
you can play a different Voice between the Left hand
and Right hand areas.
1
Press the [SPLIT] button to turn on Split.
The keyboard is divided into the Left hand and
Right hand areas.
You can play a “Split Voice” on the Left hand area
of the keyboard while playing a Main Voice and
Dual Voice on the Right hand area of the key-
board.
The highest key for the Left hand area is referred
to as the “Split Point” which can be changed from
the default F#2 key. For details, refer to page 47.
2
Press the [SPLIT] button again to exit
from Split.
You can easily select a different Split Voice (page 40).
Layering a Dual Voice
Flute
134
Two voices will
sound at the
same time.
Appears when
dual voice is on
Playing a Split Voice in the Left
Hand area
Flute
134
Appears when split
voice is on
Split voice
Main voice and dual voice
Split Point ... default value: 054 (F#2)
036
(C1)
048
(C2)
060
(C3)
072
(C4)
084
(C5)
096
(C6)
Try Playing a Variety of Instrument Voices
PSR-E443 Owner’s Manual
19
Quick Guide
The instrument features a built-in metronome (a
device that keeps an accurate tempo), convenient for
practicing.
1
Press the [METRONOME] button to start
the metronome.
2
Press the [METRONOME] button again
to stop the metronome.
Adjusting the Metronome Tempo
1
Press the [TEMPO/TAP] button to call up
“Tempo.
2
Adjust the Tempo value by rotating the
dial.
Setting the Time Signature
Here, we’ll set a time signature of 5/8 as an example.
1
Hold down the [METRONOME] button
for longer than a second to call up
“TimeSigN” (Time Signature Numera-
tor).
The number of beats per measure is shown on the
display.
2
Rotate the dial to select the number of
beats per measure.
A chime will sound on the first beat of each mea-
sure while the other beats will click. If “0” is
selected, all beats will simply click with no chime.
Select 5 for this example.
3
Press the CATEGORY [+] button to call
up “TimeSigD” (Time Signature Denomi-
nator).
The length of one beat is shown on the display.
4
Rotate the dial to select the length of
one beat, from 2
nd
, 4
th
, 8
th
and 16
th
note.
Select “08” (8
th
note) for this example.
5
Confirm the setting by playing the Met-
ronome.
Setting the Metronome Volume
1
Press the [FUNCTION] button.
2
Press the CATEGORY [+] or [-] buttons
repeatedly until “MtrVol” (Function 068)
appears.
3
Rotate the dial to set the Metronome Vol-
ume.
Using the Metronome
Tempo
090
Current Tempo value
TimeSigN
04
Number of beats
per measure.
Hold for longer
than a second.
• This parameter cannot be set during playback of a Style,
Song or Pattern.
NOTE
TimeSigD
04
The length
of one beat.
MtrVol
100
068
Metronome volume
Try Playing a Variety of Instrument Voices
PSR-E443 Owner’s Manual
20
Quick Guide
You can add harmony notes to the Main Voice.
1
Press the [HARMONY] button to turn
Harmony on.
Although turning on the Harmony will select a
Harmony Type suitable for the current Main
Voice, you can select a different Harmony Type.
2
Hold down the [HARMONY] button for
longer than a second until “HarmType”
appears on the display.
After “HarmType” is shown for a few seconds, the
current Harmony Type appears.
3
Rotate the dial to select the desired Har-
mony Type.
For details, refer to the Effect Type List of the sep-
arate Data List.
The effect and operation differs depending on the
Harmony Type. Refer to “How to sound each Har-
mony Type” below.
4
Press the [HARMONY] button again to
turn Harmony off.
Adjusting the Harmony Volume
You can adjust the Harmony Volume in the Function
Settings (page 53).
Adding Harmony
Appears when the Harmony
is turned on.
HarmType
039
Trio
02
039
Hold for longer
than a second.
Current Harmony Type
How to sound each Harmony Type
• Harmony type 01 to 05
Press the right-hand keys while playing chords in
the auto accompaniment range of the keyboard
when the Auto Accompaniment is on (page 23).
• Harmony type 06 to 12 (Trill)
Hold down two keys.
• Harmony type 13 to 19 (Tremolo)
Keep holding
down the keys.
• Harmony type 20 to 26 (Echo)
Play the keys.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Yamaha PSR-E443 Manualul proprietarului

Categorie
Tastaturi MIDI
Tip
Manualul proprietarului