Electrolux EHG30215X Manual de utilizare

Tip
Manual de utilizare
Gas Hob
Kuhala
Plită încorporată
EHG 30215
HR RO
operating instructions
Upute za uporabu
Manual de instrucţiuni
2 electrolux
electrolux 3
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully
will provide you with lots of pleasure in the future.
The Electrolux ambition is to offer a wide variety of quality products that make
your life more comfortable.
You find some examples on the cover in this manual. Please take a few minutes
to study this manual so that you can take advantage of the benefits of your new
machine.
We promise that it will provide a superior User Experience delivering Ease-of-
Mind.
Good luck!
4 electrolux
Important safety information .............................................................................. 5
Operation .......................................................................................................... 7
Using the hob correctly ..................................................................................... 8
Cleaning and Maintenance ................................................................................ 9
Service and original spare parts ....................................................................... 20
European guarantee ........................................................................................ 21
For the User
For the Installer
Technical data ................................................................................................. 10
Installation ....................................................................................................... 12
Gas connection ............................................................................................... 12
Adaptation to different types of gas ................................................................. 14
Electrical connection ....................................................................................... 15
Building In ....................................................................................................... 17
Possibilities for insertion .................................................................................. 19
Contents
The following symbols will be found in the text to guide you throughout the
Instructions:
Safety Instructions
Step by step instructions for an operation
Hints and Tips
Environmental information
!
Guide to Use the instructions
This appliance complies with the following E.E.C. Directives:
2006/95 (Low Voltage Directive);
89/336 (Electromagnetical Compatibility Directive);
93/68 (General Directives);
90/396 (Gas Appliances)
and subsequent modifications.
MANUFACTURER:MANUFACTURER:
MANUFACTURER:MANUFACTURER:
MANUFACTURER:
ELECTROLUX HOME PRODUCTS ITALY S.p.A.
Viale Bologna 298
47100 FORLÌ (Italy)
electrolux 5
Installation
" The work of installation must be
carried out by competent and qualified
installers according to the regulations
in force.
Any modifications to the domestic
electrical mains which may be
necessary for the installation of the
appliance should be carried out only
by competent personnel.
During Operation
This appliance has been designed for
non professional purpose in private
houses only. It is meant to cook edible
foodstuff only and must not be used
for any other purposes.
It is dangerous to alter the specification
in any way.
For hygiene and safety reasons, this
appliance should be kept clean at all
times. A build-up of fats or other
foodstuff could result in a fire.
Under no circumstances should you
attempt to repair the appliance
yourself. Repairs carried out by
unexperienced persons may cause
injury or serious malfunctioning. Refer
to your local Service Centre. Always
insist on genuine spare parts.
Ensure that all control knobs are in the
OFF position when not in use.
Should you connect any electrical tool
to a plug near this cooking appliance,
ensure that electric cables are not in
English
This warnings has been given for the safety of you and others. We therefore
ask you to carefully read the procedures of installing and using this cooker.
Important safety information
contact with it and keep them far
enough from the heated parts of this
appliance.
If the appliance is out of order,
disconnect it from the electric supply.
Child Safety
This appliance has been designed to
be operated by adults and children
under supervision. Young children
must not be allowed to tamper with the
controls or play near or with the oven.
This appliance is not intended for use
by children or other persons whose
physical, sensory or mental capabilities
or lack of experience and knowledge
prevents them from using the
appliance safely without supervision or
instruction by a responsible person to
ensure that they can use the appliance
safely.
Accessible parts of this appliance may
become hot when it is in use. Children
should be kept away until it has
cooled.
About Installation, Cleaning and
Manteinance
" It is mandatory that all operations
required for the installation are carried
out by a qualified or competent
person, in accordance with existing
rules and regulations.
Disconnect the appliance from the
electrical supply, before carrying out
any cleaning or manteinance work.
6 electrolux
Ensure a good ventilation around the
appliance. A poor air supply could
cause lack of oxygen.
Ensure that the gas supply complies
with the gas type stated on the
identification label, placed near the gas
supply pipe.
This appliance is not connected to a
combustion products evacuation
device. It must be installed and
connected in accordance with current
installation regulations. Particular
attention shall be given to the relevant
requirements regarding ventilation.
The use of a gas cooking
appliance results in the production
of heat and moisture in the room in
which it is installed. Ensure that
the kitchen is well ventilated: keep
natural ventilation holes open or
install a mechanical ventilation
device (mechanical extractor
hood).
Prolonged intensive use of the
appliance may call for additional
ventilation, for example opening of
a window, or more effective
ventilation, for example increasing
the level of mechanical ventilation
where present.
Once you removed all packaging from
the appliance, ensure that it is not
damaged and the electric cable is in
perfect conditions. Otherwise, contact
your dealer before proceeding with the
installation.
The manufacturer disclaims any
responsability should all the safety
measures not be carried out.
Service
Under no circumstances should you
attempt to repair the appliance
yourself. Repairs carried out by
unexperienced persons may cause
injury or serious malfunctioning. Refer
to your local Service Centre. Always
insist on genuine spare parts.
Environmental Information
" After installation, please dispose of
the packaging with due regard to
safety and the environment.
When disposing of an old appliance,
make it unusable, by cutting off the
cable.
The symbol on the product or
on its packaging indicates that this
product may not be treated as household
waste. Instead it shall be handed over to
the applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative consequences
for the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.
It is very important that this
instruction book should be kept
safely for future consultation. If the
appliance should be sold or given to
another person, please ensure that
the booklet goes together with it, so
that the new owner can know of the
functions of the machine and also be
aware of the warnings.
These instructions are only for the
countries stated by the symbol printed
on the front cover of this instruction
book.
electrolux 7
Operation
Hob burner control knobs
The symbols on the knobs mean:
= no gas supply
= maximum gas supply
= minimum gas supply
For easier lighting, proceed before
putting a pan on the pan support.
Lighting the burners
To light a burner, turn the relevant
knob anticlockwise to maximum
position ( ) and push down the knob
to ignite.
After lighting the flame, keep the
knob pushed down for about 5
seconds. This will allow the
"thermocouple" to be heated and the
safety device to be switched off,
otherwise the gas supply would be
interrupted. Then, check the flame is
regular and adjust it as required.
If you cannot light the flame even
after several attempts, check the "cap"
and “crown” are in the correct position.
In the absence of electricity, ignition
can occur without the electrical device;
in this case approach the burner with a
flame, push the relevant knob down and
turn it anti-clockwise until it reaches the
"maximum" position.
To switch off burners
To put the flame out, turn the knob to
the symbol ( ).
!
Do not keep the control knob
pressed for more than 15 se-
conds.
If the burner does not light
even after 15 seconds, release
the control knob, turn it the
"off" position and wait for at
least one minute before trying
to light the burner again.
If the burner accidentally goes
out, turn the control knob to
the "off" position and wait for
at least 1 minute before trying
to light the burner again.
Take care when frying food in
hot oil or fat, as the overheated
splashes could easily ignite.
When switching on the mains, after
installation or a power cut, it is quite
normal for the spark generator to be
activated automatically.
!
A - Burner cap
B - Burner crown
C - Ignition candle
D - Thermocouple
8 electrolux
Using the hob correctly
Practical hints
The burners
To ensure maximum burner
efficiency, you should only use pots and
pans with a flat bottom fitting the size of
the burner used.
Rapid Burner diameter 18-26 cm
Auxiliary Burner diameter 8-16 cm
For easier lighting, proceed before
putting a pan on the pan support.
Use only pans or pots with flat bottom.
Take care when frying food in hot
oil or fat, as the overheated
splashes could easily ignite.
If you use a saucepan which is smaller
than the recommended size, the flame
will spread beyond the bottom of the
vessel, causing the handle to overheat.
Prolonged cooking with
potstones, earthenware pans or
cast-iron plates is inadvisable.
Also, do not use aluminium foil to
protect the top during use.
Make sure pots do not protrude over
the edges of the cooktop and that they
are centrally positioned on the rings in
order to obtain lower gas
consumption.
Do not place unstable or deformed
pots on the rings: they could tip over or
spill their contents, causing accidents.
Pots must not enter the control zone.
If the control knobs become difficult to
turn, please contact your local Service
Force Centre.
As soon as a liquid starts boiling, turn
down the flame so that it will barely
keep the liquid simmering.
electrolux 9
Cleaning and Mainteinance
Disconnect the appliance from
the electrical supply, before
carrying out any cleaning or
manteinance work.
The hob is best cleaned whilst
it is still warm, as spillage can
be removed more easily than if
it is left to cool.
This appliance cannot be
cleaned with steam or with a
steam cleaning machine.
The burners
" The burner caps and crowns can be
removed for cleaning.
" Wash the burners taps and crowns
using hot soapy water, and remove
marks with a mild paste cleaner. A
well moistened soap impregnated
steel wool pad can be used with
caution, if the marks are particularly
difficult to remove.
" After cleaning, be sure to wipe dry
with a soft cloth.
" Frequently wash the "caps" and the
"crowns" with hot soapy water,
carefully taking away any built-up of
food.
The Hob Top
" Regularly wipe over the hob top
using a soft cloth well wrung out in
warm water to which a little wasing
up liquid has been added. Avoid the
use of the following:
- household detergent and bleaches;
- impregnated pads unsuitable for
non-stick saucepans;
- steel wool pads;
- bath/sink stain removers.
10 electrolux
Technical data
Burner gas power (natural gas 20 mbar)
Rapid burner 3,0 kW (natural gas) - 2,8 kW (liquid gas)
Auxiliary burner 1,0 kW
Category II2H3B/P
Gas supply natural gas G20 (2H) / 20 mbar
Gas connection G 1/2"
Electric supply 230 V~ 50 Hz
Appliance class 3
Hob dimensions
Width 290 mm
Depth 510 mm
Cut out dimensions
Width 270 mm
Depth 490 mm
" Should the hob top become heavily
soiled, the following products are
recommended:
- For stainless steel hobs use a
proprietary stainless steel cleaner.
- For other hobs use Hob Brite or Bar
Keepers Friend.
" After cleaning, make sure that the
pan supports are correctly
positioned.
" Do not leave acid or alkaline
substances (e.g. vinegar, salt,
lemon juice, etc.) on the cooktop.
The Ignition electrode
The electric ignition is obtained
through a ceramic electrode with a
metal electrode. Keep these
components very clean, to avoid difficult
lighting, and check that the burner
crown holes are not obstructed.
electrolux 11
Gas burners
NORMAL REDUCED
NORMAL
POWER POWER
POWER
BURNER NATURAL GAS LIQUID GAS
G20 (2H) - 20 mbar
(Butane/Propane) 30 mbar
kW kW g/h
inj. m
3
/h inj.
G30 G31
100/mm 100/mm
Auxiliary
burner 1,0 0,33 70 0,095 50 73 71
Rapid 3,0
burner (natural gas)
2,8 0,75 119 0,286 86 204 200
(
liquid gas
)
By-pass diameters
Burner Ø By-pass in 1/100 mm.
Auxiliary 28
Rapid 42
12 electrolux
" The following instructions about
installation and maintenance must
be carried out by qualified
personnel in compliance with the
regulation in force.
" The appliance must be electrically
disconnected before all
interventions. If any electric supply
to the appliance is required to
carry out the work, ensure all the
necessary precautions are
followed.
" The side walls of the unit in which
the hob is going to be installed,
must not exceed the height of the
working top.
" Avoid installing the appliance in
the proximity of inflammable
materials (e.g. curtains, tea towels
etc.).
THE MANUFACTURER WILL NOT
ACCEPT LIABILITY, SHOULD ANY
OF THE OTHER SAFETY
INSTRUCTIONS INCORPORATED IN
THIS BOOKLET OR THE
REGULATION IN FORCE BE
IGNORED.
Installation
Choose fixed connections or use a
flexible pipe instainless steel in
compliance with the regulation in force.
If using flexible metallic pipes, be careful
they do not come in contact with mobi-
le parts or they are not squeezed. Use
the same attention when the hob is
combinated with an oven.
Gas connection
electrolux 13
IMPORTANT - To ensure a correct
operation, a savingof energy and the
long life of the appliance, the voltage
pressure of the appliance must
correspond to the recommended values.
The adjustable connection is fixed to the
comprehensive ramp by means of a
threaded nut G 1/2". Interpose the
sealing between the components as
shown in the picture. Screw the parts
without forcing, adjust the connection in
the required direction and tighten
everything.
Connection using flexible
nonmetal pipes
When the connection can be easily
inspected in its full extent, there is the
chance to use a flexible pipe according
to the rules in force. The flexible pipe
must be tightly fixed using clamps
according to the rules in force.
Liquid gas: use the rubber pipe holder
«D». Always insert the gasket «B». Then
proceed with the gas connection. The
flexible pipe should be made ready for
use in such a way that:
- nowhere it can reach overtemperature,
other than room temperature, higher
than 30°C; if the flexible pipe, to reach
the cock, must run behind the range,
it must be installed as shown in picture;
- it is no longer than 1500 mm;
- it shows no throttles;
- it is not subject to traction or torsion;
- it doesn't get in touch with cutting
edges or corners;
-it can be easily inspected in order to
check its condition.
A) Ramp with ending nut
B) Seal
C) Adjustable connection
D) Rubber pipe holder for liquid gas
D
Natural gas
Liquid gas
The control of preservation of the flexible
pipe consistsin checking that:
- it doesn't show cracks, cuts, marks
of burnings bothon the end parts and
on its full extent;
- the material is not hardened, but
shows its normal elasticity;
- the fastening clamps are not rusted;
- expiry term is not due.
If one or more abnormalities are seen,
do not repair the pipe, but replace it.
IMPORTANT
Once installation is complete,
check the perfectseal of every
pipe fitting, using a soapy
solution, never a flame.
14 electrolux
Adaptation to different types of gas
A. Injectors replacement
Remove the pan supports.
Remove the burner's caps and
crowns.
With a socket spanner 7 unscrew
and remove the injectors (Fig. 1), and
replace them with the ones required
for the type of gas in use (see table
«Gas burners» - page 11).
Reassemble the parts, following the
same procedure backwards.
Replace the rating label (placed near
the gas supply pipe) with the relevant
one for the new type of gas supply.
You can find this label in the package
of the injectors supplied with the
appliance.
Should the feeding gas pressure be
different or variable compared with the
required pressure, an appropriate
pressure adjuster must be fitted on the
gas supply pipe, in compliance with the
rules in force.
B. Adjustment of minimum
level
To adjust the minimum level of the
burners, proceed as follows:
Light the burner.
Turn the knob on the minimum
position.
Remove the knob.
With a thin screwdriver, adjust the
by-pass screw positioned in the
centre of the gas tap control shaft
(see Fig. 2). If changing from natural
gas to liquid gas, completely tighten
the adjustment screw in. If changing
from liquid gas to natural gas, undo
the by-pass screw about 1/4 of a
turn.
Finally check the flame does not go
out when quickly turning the knob
from the maximum position to the
minimum position.
!!
!!
!
!!
!!
!
This procedure can easily be carried
out, anyhow the hob has been
positioned or built in the working top.
Minimum adjustment screw
Fig. 1
Fig. 2
electrolux 15
The appliance is designed to be
connected to 230 V monophase
electricity supply.
The connection must be carried out
in compliance with the laws and
regulations in force.
Before the appliance is connected:
1) check that the main fuse and the
domestic installation can support the
load (see the rating label);
2) check that the power supply is
properly earthed in compliance with the
current rules;
3) check the socket or the double
pole switch used for the electrical
connection can be easily reached with
the appliance built in the forniture unit.
The appliance is supplied with a
connection cable. This has to be
provided with a proper plug, able to
support the load marked on the
identification plate. The plug has to be
fitted in a proper socket.
If connecting the appliance directly
to the electric system, it is necessary
that you install a double pole switch
between the appliance and the
electricity supply, with a minimum gap
of 3 mm. between the switch contacts
and of a type suitable for the required
load in compliance with the current
rules.
The connection cable has to be
placed in order that, in each part, it
cannot reach a temperature 50°C
higher than room temperature.
The brown coloured phase cable
(fitted in the terminal block contact
marked with "L") must always be
connected to the network phase.
Electrical connection
16 electrolux
Remplacement of the voltage
cable
The connection of the voltage cable
to the appliance's terminal block is of
type "Y". This means that its
replacement requires the specific
equipment of a technician. In this case,
only cable type H05V2V2-F T90 must
be used. The cable section must be
suitable to the voltage and the working
temperature. The yellow/green earth
wire must be approximately 2 cm.
longer than the phase wires (Fig. 3-a).
To open the terminal block and reach
the terminals, proceed as follows:
" insert the point of a screwdriver into
the visible protrunding part of the
terminal block;
" exert a light pressure and lift (Fig. 3-b).
Fig. 3-b
Earth
(yellow/green))
Neutral
Fig. 3-a
Fig. 4
electrolux 17
Building In
These hobs can be inserted in a
built-in kitchen unit whose depth is
between 550 and 600 mm. The hobs
dimensions are shown in Fig. 5.
The edge of the cut out must have a
minimum distance from the rear wall of
55 mm.
If there are side walls, or sides of the
furniture unit near the hob, the cut out
edges must have a minimum distance of
100 mm.
Hanging forniture units or hoods
must be placed at 650 mm. minimum
from the hob.
Fitting the hob to the worktop
These hobs can be installed in a
kitchen unit with an opening for insertion
whose dimensions are shown in Fig. 6.
A = Auxiliary burner
R = Rapid burner
Fig. 6
Dimensions are given in
millimeters
Fig. 5
A
R
290
510
550 M
IN
591
1
4
0
240
490
55
270
40÷50
30
650 MIN.
18 electrolux
Fig.7
a) seal
Carry out the building in of the hob
as follows:
1. Put the relevant sealings,
supplied with the hob, on the edges of
the cut out, taking care that the sealings
meet without overlapping;
2. place the hob in the cut out,
taking care of its centring;
3. fix the hob with the relevant
screws (Fig. 7). The traction of the
screws is able to trace the sealing, any
excess of which can then be easily
removed.
If several 30 cm hob are to be
installed side by side into the same
cut out, an assembly kit including a
support side bracket and
supplementary sealings is available
at our After Sales Centres. The
relevant installation instructions are
supplied within the kit package.
a
electrolux 19
Possibilities for insertion
Kitchen unit with door
Proper arrangements must be taken
in designing the forniture unit, in order to
avoid any contact with the bottom of the
hob which can be heated when it is
operated. The recommended solution is
shown in Fig. 8. The panel fitted under
the hob should be easily removable to
allow an easy access if a technical assis-
tance intervention is needed.
Kitchen unit with oven
The hob recess dimensions must
comply the indication given in Fig. 6 and
must be provided with brackets to allow
a continuous supply of air.
To avoid overheating, the building in
should be carried out as shown in Figs.
9 and 10.
The hob's electric connection and
the oven's one must be carried out
separately, both for safety reasons and
to allow the oven to be easily taken off
the unit.
a) Removable panel
b) Space for connections
Fig. 8
Fig. 9
Fig. 10
20 electrolux
Service and original spare parts
This machine, before leaving the
factory, has been tested and studied by
many experts and specialists, in order to
give you the best results.
Any repair work which needs to be
carried out should be done with the
utmost care and attention.
For this reason we recommend that
for any problem you contact the dealer
who sold it to you, or our nearest
authorized Service Centre, specifying the
nature of the problem, the appliance
model (Mod.), the product number (Prod.
No.) and the serial number (Ser. No.)
marked on the identification plate supplied
in the injectors kit.
Original spareparts, certified by the
product manufacturer and carrying this
symbol are only
available at our Ser-
vice Centre and
authorized spareparts
shops.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Electrolux EHG30215X Manual de utilizare

Tip
Manual de utilizare

în alte limbi