Asus ExpertCenter E500 G9 Manual de utilizare

E22077

USER GUIDE

ii

No part of this manual, including the products and software described in it, may be reproduced, transmitted,

transcribed, stored in a retrieval system, or translated into any language in any form or by any means,

except documentation kept by the purchaser for backup purposes, without the express written permission

of ASUSTeK COMPUTER INC. (“ASUS”).

ASUS provides this manual “as is” without warranty of any kind, either express or implied, including but not

limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no

event shall ASUS, its directors, officers, employees, or agents be liable for any indirect, special, incidental,

or consequential damages (including damages for loss of profits, loss of business, loss of use or data,

interruption of business and the like), even if ASUS has been advised of the possibility of such damages

arising from any defect or error in this manual or product.

Specifications and information contained in this manual are furnished for informational use only, and are

subject to change at any time without notice, and should not be construed as a commitment by ASUS.

ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual,

including the products and software described in it.

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless

such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identification or explanation and to the

owners’ benefit, without intent to infringe.

E22077

Revised Edition V4

May 2023

iii

Contents

Safety information ...................................................................................................... vi

Electrical Safety ..............................................................................................vi

Operation Safety .............................................................................................vi

About this guide ........................................................................................................ vii

Chapter 1: Product Introduction

1.1 System package contents ......................................................................... 1-2

1.2 Serial number label .................................................................................... 1-2

1.3 E500 G9 specifications summary ............................................................. 1-3

1.4 Front panel features ...................................................................................1-6

1.5 Rear panel features ....................................................................................1-7

1.6 Internal features .........................................................................................1-8

1.7 LED information .........................................................................................1-9

1.7.1 Front panel LEDs ........................................................................1-9

1.7.2 Rear panel LEDs .......................................................................1-10

Chapter 2: Hardware Setup

2.1 Chassis cover .............................................................................................2-2

2.1.1 Removing the side cover.............................................................2-2

2.2 CPU installation ..........................................................................................2-4

2.3 Cooling system installation ......................................................................2-7

2.4 System memory .........................................................................................2-9

2.4.1 Installing a DIMM on a single clip DIMM socket........................2-11

2.5 Front panel cover ..................................................................................... 2-12

2.5.1 Removing the front panel cover ................................................ 2-12

2.6 5.25-inch drives ........................................................................................ 2-13

2.7 Hard disk drives (HDD) ............................................................................ 2-15

2.8 Expansion slots ........................................................................................2-19

2.8.1 Installing an expansion card......................................................2-20

2.8.2 Configuring an expansion card .................................................2-22

2.8.3 Installing M.2 (NGFF) cards ...................................................... 2-23

2.8.4 Installing an M.2 fan (optional) .................................................. 2-26

2.9 System fan ................................................................................................ 2-28

2.10 BIOS update utility ................................................................................... 2-29

2.11 Motherboard rear and audio connection ...............................................2-31

2.11.1 Rear I/O connection ..................................................................2-31

2.11.2 Audio I/O connections ............................................................... 2-32

iv

Contents

Chapter 3: Motherboard Information

3.1 Motherboard layout ....................................................................................3-2

3.2 Onboard buttons and switches ................................................................3-4

3.3 Jumpers ......................................................................................................3-5

3.4 Onboard LEDs ............................................................................................ 3-7

3.5 Internal connectors ..................................................................................3-10

Chapter 4: BIOS Setup

4.1 Introduction to the BIOS ............................................................................4-2

4.2 BIOS setup program ..................................................................................4-3

4.2.1 EZ Mode......................................................................................4-4

4.2.2 Advanced Mode ..........................................................................4-5

4.2.3 Q-Fan Control .............................................................................4-8

4.3 My Favorites .............................................................................................4-10

4.4 Main menu ................................................................................................4-12

4.5 Advanced menu .......................................................................................4-14

4.5.1 Platform Misc Configuration ...................................................... 4-15

4.5.2 CPU Configuration ....................................................................4-16

4.5.3 System Agent (SA) Configuration ............................................. 4-20

4.5.4 PCH Configuration ....................................................................4-22

4.5.5 PCH Storage Configuration.......................................................4-23

4.5.6 PCH-FW Configuration .............................................................4-24

4.5.7 AMT Configuration ....................................................................4-25

4.5.8 Thunderbolt(TM) Configuration ................................................. 4-27

4.5.9 Serial Port Console Redirection ................................................ 4-28

4.5.10 Intel TXT Information.................................................................4-31

4.5.11 PCI Subsystem Settings ...........................................................4-31

4.5.12 USB Configuration ....................................................................4-32

4.5.13 Network Stack Configuration.....................................................4-33

4.5.14 NVMe Configuration ..................................................................4-33

4.5.15 HDD/SSD SMART Information .................................................4-34

4.5.16 APM Configuration .................................................................... 4-34

4.5.17 Onboard Devices Configuration ................................................ 4-35

4.5.18 Intel(R) Rapid Storage Technology ...........................................4-37

4.6 Monitor menu ...........................................................................................4-38

4.7 Boot menu ................................................................................................4-46

v

Contents

4.8 Tool menu ................................................................................................. 4-52

4.8.1 ASUS EZ Flash 3 Utility ............................................................4-53

4.8.2 Secure Erase ............................................................................4-53

4.8.3 ASUS User Profile.....................................................................4-54

4.8.4 ASUS SPD Information ............................................................. 4-55

4.8.5 MemTest86 ...............................................................................4-55

4.9 Exit menu .................................................................................................. 4-56

4.10 Updating BIOS ..........................................................................................4-57

4.10.1 EZ Update ................................................................................. 4-57

4.10.2 ASUS EZ Flash 3 ...................................................................... 4-58

4.10.3 ASUS CrashFree BIOS 3 ..........................................................4-59

Chapter 5: RAID Configuration

5.1 RAID configurations ..................................................................................5-2

5.1.1 RAID definitions ..........................................................................5-2

5.1.2 Installing storage devices ............................................................5-2

5.1.3 Creating a SATA RAID set in UEFI BIOS ................................... 5-3

5.1.4 Creating an NVMe RAID set with onboard M.2

modules in UEFI BIOS ................................................................ 5-6

5.1.5 Deleting a RAID set...................................................................5-10

5.2 Installing the RAID controller driver during Windows® 10 or

Windows® 11 OS installation ..................................................................5-11

Appendix

W680/SYS block diagram ....................................................................................... A-2

Q-Code table ............................................................................................................ A-3

Notices .................................................................................................................... A-7

Warranty ................................................................................................................. A-20

Service and Support ............................................................................................. A-22

vi

Safety information

Electrical Safety

• Before installing or removing signal cables, ensure that the power cables for the system

unit and all attached devices are unplugged.

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

• When adding or removing any additional devices to or from the system, contact a

qualified service technician or your dealer. Ensure that the power cables for the devices

are unplugged before the signal cables are connected. If possible, disconnect all power

cables from the existing system before you service.

• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service

technician or your dealer.

Operation Safety

• Servicing of this product or units is to be performed by trained service personnel only.

• Before operating the server, carefully read all the manuals included with the server

package.

• Before using the server, make sure all cables are correctly connected and the power

cables are not damaged. If any damage is detected, contact your dealer as soon as

possible.

• To avoid short circuits, keep paper clips, screws, and staples away from connectors,

slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Place the server on a stable surface.

This product is equipped with a three-wire power cable and plug for the user’s safety. Use

the power cable with a properly grounded electrical outlet to avoid electrical shock.

Lithium-Ion Battery Warning

CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer. Dispose of

used batteries according to the manufacturer’s instructions.

Heavy System

CAUTION! This server system is heavy. Ask for assistance when moving or carrying

the system.

CLASS 1 LASER PRODUCT

vii

About this guide

Audience

This user guide is intended for system integrators, and experienced users with at least basic

knowledge of configuring a server.

Contents

This guide contains the following parts:

1. Chapter 1: Product Introduction

This chapter describes the general features of the server, including sections on front

panel and rear panel specifications.

2. Chapter 2: Hardware Setup

This chapter lists the hardware setup procedures that you have to perform when

installing or removing system components.

3. Chapter 3: Motherboard Information

This chapter includes the motherboard layout and brief descriptions of the jumpers and

internal connectors.

4. Chapter 4: BIOS Setup

This chapter tells how to change system settings through the BIOS Setup menus and

describes the BIOS parameters.

5. Chapter 5: RAID Configuration

This chapter provides instructions for setting up, creating and configuring RAID sets

using the available utilities.

viii

References

Refer to the following sources for additional information, and for product and software

updates.

ASUS websites

The ASUS websites provide updated information for all ASUS hardware and software

products. Visit https://www.asus.com for more information.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used

throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to

complete a task.

CAUTION: Information to prevent damage to the components when trying to

complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign means

that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or

Return key.

<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key

names are linked with a plus sign (+).

Example: <Ctrl> + <Alt> + <Del>

Command Means that you must type the command exactly as shown,

then supply the required item or value enclosed in brackets.

Example: At DOS prompt, type the command line:

format A:/S

This chapter describes the general features of the server,

including sections on front panel and rear panel specifications.

1

Product Introduction

Chapter 1: Product Introduction

1-2

If any of the above items is damaged or missing, contact your retailer.

1.1 System package contents

Check your system package for the following items.

1.2 Serial number label

Before requesting support from the ASUS Technical Support team, you must take note of the

product’s serial number containing 12 characters such as xxSxxxxxxxxx shown as the figure

below. With the correct serial number of the product, ASUS Technical Support team members

can then offer a quicker and satisfying solution to your problems.

Model Name E500 G9

Accessories 1 x E500 G9 Support DVD

1 x AC Power Cable

1 x COM Port Cable

Optional Items Smart Card Reader

Antivirus CD Pack

Print Port Cable

DVD-RW

Keyboard and Mouse

xxSxxxxxxxxx

E500 G9

SD/MMC/MS

Smart Card

ASUS E500 G9 1-3

1.3 E500 G9 specifications summary

The ASUS E500 G9 workstation features the ASUS W680/SYS motherboard.

(continued on the next page)

Processor / System Bus

1 x Socket (LGA1700)

Intel® 12th Generation Core™ i3/i5/i7/i9 Processors

Intel® 13th Generation Core™ i5/i7/i9 Processors

* Please refer to www.asus.com for Intel® CPU support list.

Core Logic Intel® W680 Chipset

(Supports Intel vPro®)

Memory

Total Slots 4 (2-channel per CPU, 4 DIMM per CPU)

Capacity Maximum up to 128GB (UDIMM)

Memory Type

DDR5 4400/3600 MHz, ECC/non-ECC UDIMM

* Memory frequency support also depends on the CPU installed.

Please refer to www.asus.com for latest memory AVL update.

Memory Size 32GB, 16GB, 8GB (UDIMM)

* Please refer to www.asus.com for latest memory AVL update.

Expansion

Slots

Total PCI/PCI-X

/PCIe Slots 5

Slot Type

Slot 1: PCIe x16 slot, Gen5 x16 or x8 Link, from CPU

(shared with Slot 3, x8/x8)

Slot 2: PCIe x1, Gen3 x1, from PCH

Slot 3: PCIe x16 slot, Gen5 x8 Link, from CPU

Slot 4: PCIe x16 slot, Gen4 x4 Link from PCH

Slot 5: PCIe x16 slot, Gen3 x4 Link, from PCH

M.2

1 x M.2 2280/2260/2242 PCIe Gen4 x4 ,from CPU

1 x M.2 2280/2260/2242 PCIe Gen3 x4 ,from PCH

1 x M.2 22110/2280/2260/2242 PCIe Gen4 x4 ,from PCH

1 x M.2 2330 PCIe Gen3 x1 (for WIFI Module)

(Supports Intel® Optane Memory)

Disk

Controller

SATA

Controller

Intel® W680 Chipset:

8 x SATA 6Gb/s

Intel® RST (Windows)

(Supports software RAID 0, 1, 10 & 5)

Storage

Bays

Storage Bay 3 x Internal 3.5” Storage Bays

1 x Internal 2.5” Storage Bays

MB on-board

Connectors

3 x M.2 Connectors

8 x SATA 7-pin Connectors

Default Cable 4 x SATA 6G Cables

Chapter 1: Product Introduction

1-4

E500 G9 specifications summary

Networking 2 x Intel® I225-LM 2.5GbE LAN

VGA

CPU Integrated (Intel® UHD)

Multi-VGA output support: DVI-D/HDMI™/DisplayPort/VGA

- Supports DVI-D with Max resolution 1920 x 1200@60 Hz

- Supports HDMI™ 1.4 with Max resolution 4096 x

2160@24 Hz

- Supports DisplayPort 1.4 with Max resolution 4096 x

2160@60 Hz

- Supports VGA with Max resolution 1920 x 1200@60 Hz

Graphic Up to 1 GPU Card

Audio Realtek® ALC897 7.1-Channel High Definition Audio

CODEC

Auxiliary Storage Device

Bay (Floppy / Optical Drive)

2 x 5.25” Media Bays

ODD/DVD-RW (optional)

Front I/O

1 x USB 3.2 Gen 2x2 Port

2 x USB 3.2 Gen 1 Ports

1 x USB 2.0 Ports

1 x Headphone Jack

1 x Microphone Jack

Rear I/O

2 x USB 3.2 Gen 2 Ports (1 x Type A Port, 1 x USB Type-C®

Port)

4 x USB 3.2 Gen 1 Ports

1 x HDMI™ Port

1 x DisplayPort

1 x DVI-D Port

1 x VGA Port

2 x LAN Ports (RJ-45)

1 x 7.1-channel Audio I/O Ports (5+1 Audio Jacks)

Switch/LED

Front Switch/LED:

1 x Power Switch/LED

1 x Reset Switch

1 x HDD Access LED

Security Options Trusted Platform Module (TPM 2.0)

Other Options LPT Port

(continued on the next page)

ASUS E500 G9 1-5

Specifications are subject to change without notice.

E500 G9 specifications summary

OS Support

Windows® 11 Pro for Workstation

* Refer to https://www.asus.com/event/Server/OS_support_list/OS.html

for the latest OS support.

Management Software ASUS Control Center support

Regulatory Compliance BSMI, CE, FCC, ENERGY STAR®

Dimension (HH x WW x DD) 423 mm x 190 mm x 435 mm

16.7" x 7.48" x 17.1"

Net Weight 9.9 Kg

(excluding CPU, DRAM, and HDD)

Gross Weight 12.1 Kg

(including packaging, excluding CPU, DRAM, and HDD)

Power Supply and Rating

300W Bronze ATX Power Supply

(100-127/220-240Vac, 6-3A, 50-60Hz, Class I)

550W Gold ATX Power Supply

(100-240Vac, 9-4.5A, 50-60Hz)

750W Gold ATX Power Supply

(100-240Vac, 9-4.5A, 50/60Hz)

1000W ASUS/TUF-GAMING-1000G ATX Power Supply

(100-240Vac, 15-8A, 47/63Hz)

Environment

Operating temperature: 10°C ~ 35°C

Non-operating temperature: -40°C ~ 70°C

Non-operating humidity: 20% ~ 90% (Non-condensing)

Chapter 1: Product Introduction

1-6

SD/MMC/MS

Smart Card

1.4 Front panel features

Optical Drive (Optional)

Empty 5.25-inch bay

HDD access LED

Reset button

Microphone port

Headphone port

Power button

USB 2.0 port

USB 3.2 Gen 1 ports

Card reader

Empty 5.25-inch bay

USB 3.2 Gen 2x2 port

ASUS E500 G9 1-7

KY

MIC IN

REAR C/SUB

LINE OUT LINE IN

DVI

VGA OUT

HDMI

Display/Port

TYPE C

10

2.5G

SPDIF OUT

1.5 Rear panel features

Single power supply

Power connector

HDMI™ port

DVI port

VGA port

DisplayPort

Expansion slots

PCIe latch

LAN port

120 mm x 120 mm

system fan vents

Audio ports

USB 3.2 Gen 1 ports

USB 3.2 Gen 2

Type-A port

USB 3.2 Gen 2

Type-C® port

Chapter 1: Product Introduction

1-8

1.6 Internal features

The ASUS E500 G9 workstation includes the basic components as shown:

The barebone server does not include a floppy disk drive. If you need to use a floppy disk,

connect the USB floppy disk drive to any of the USB ports on the front or rear panel.

WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

Turn off the system power and detach the power supply before removing or replacing any

system component.

1. Power supply unit

2. 120 mm x 120 mm system fan

3. ASUS W680/SYS motherboard

4. Expansion card locks

5. Optical drive (Optional)

6. 1 x 5.25-inch drive bay

7. Front I/O board (hidden)

8. 3 x 3.5-inch Internal storage bays

9. 1 x 2.5-inch Internal storage bay

ASUS E500 G9 1-9

SD/MMC/MS

Smart Card

SD/MMC/MS

Smart Card

1.7 LED information

1.7.1 Front panel LEDs

LED Icon Display status Description

HDD Access LED OFF No activity

Blinking Storage device reading or writing data

HDD Access LED

Chapter 1: Product Introduction

1-10

KY

MIC IN

REAR C/SUB

LINE OUT LINE IN

DVI

VGA OUT

HDMI

Display/Port

TYPE C

10

2.5G

SPDIF OUT

1.7.2 Rear panel LEDs

ACT/LINK LED

USB 3.0

MIC IN

SIDE REAR C/SUB

LINE OUT LINE IN

KY

DVI

VGA

OUT

HDMI

SPDIF OUT

Display/Port

USB 3.1

10

USB 3.0

SPEED LED

You can disable the LAN controllers in BIOS. Due to hardware design, the LAN1 port’s

LEDs may continue to blink even when disabled.

Activity Link LED Speed LED

Status Description Status Description

Off No link Off 10/100 Mbps connection

Green Linked Orange 1 Gbps connection

Green (Blinking) Data activity Green 2.5 Gbps connection

Green (Blinking then steady) Ready to wake

up from S5 mode

Intel® I225-LM 2.5G LAN ports LED indications

2

Hardware Setup

This chapter lists the hardware setup procedures that you have

to perform when installing system components. It includes

description of the jumpers and connectors on the motherboard.

Chapter 2: Hardware Setup

2-2

KY

MIC IN

REAR C/SUB

LINE OUT LINE IN

DVI

VGA OUT

HDMI

Display/Port

TYPE C

10

2.5G

SPDIF OUT

2.1 Chassis cover

2.1.1 Removing the side cover

• Ensure that you unplug the power cord before removing the side cover.

• Take extra care when removing the side cover. Keep your fingers from components

inside the chassis that can cause injury, such as the CPU fan, rear fan, and other

sharp-edged parts.

• The images of the system shown in this section are for reference purposes only and

may not exactly match the model you purchase.

To remove the side cover:

1. Remove the two screws that secure the

side cover.

2. Press the side cover locks outward.

Screws

KY

MIC IN

REAR C/SUB

LINE OUT LINE IN

DVI

VGA OUT

HDMI

Display/Port

TYPE C

10

2.5G

SPDIF OUT

Side cover locks

Pagina se încarcă ...

Asus ExpertCenter E500 G9 Manual de utilizare

Asus ExpertCenter E500 G9 Manual de utilizare

în alte limbi