Indesit IWCN 61051X9 EU Manualul utilizatorului

Categorie
Mașini de spălat
Tip
Manualul utilizatorului
1
GB
Contents
Installation, 2-3
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Care and maintenance, 4
Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and tips, 5
General safety
Disposal
Description of the washing machine
and starting a wash cycle, 6-7
Control panel
Indicator lights
Starting a wash cycle
Wash cycles, 8
Table of wash cycles
Personalisation, 9
Setting the temperature
Setting the spin speed
Functions
Detergents and laundry, 10
Detergent dispenser drawer
Bleach cycle
Preparing the laundry
Garments requiring special care
Load balancing system
Troubleshooting, 11
Service, 12
IWCN 61051X9
Instructions for use
WASHING MACHINE
English, 1
GB
SK
Slovensky,13
RO
Română,25
2
GB
! This instruction manual should be kept in a safe
place for future reference. If the washing machine
is sold, transferred or moved, make sure that the
instruction manual remains with the machine so
that the new owner is able to familiarise himself/
herself with its operation and features.
! Read these instructions carefully: they contain
vital information relating to the safe installation
and operation of the appliance.
Unpacking and levelling
Unpacking
1. Remove the washing machine from its packaging.
2. Make sure that the washing machine has not
been damaged during the transportation process.
If it has been damaged, contact the retailer and do
not proceed any further with the installation process.
3. Remove the 3 pro-
tective screws (used
during transportation)
and the rubber wa-
sher with the cor-
responding spacer,
located on the rear
part of the appliance
(see figure).
4. Close off the holes using the plastic plugs
provided.
5. Keep all the parts in a safe place: you will need
them again if the washing machine needs to be
moved to another location.
! Packaging materials should not be used as
toys for children.
Levelling
1. Install the washing
machine on a flat stur-
dy floor, without resting
it up against walls,
furniture cabinets or
anything else.
2. If the floor is not
perfectly level, com-
pensate for any une-
venness by tightening
or loosening the adjustable front feet (see figure);
the angle of inclination, measured in relation to
the worktop, must not exceed 2°.
Levelling the machine correctly will provide it with
stability, help to avoid vibrations and excessive
noise and prevent it from shifting while it is ope-
rating. If it is placed on carpet or a rug, adjust the
feet in such a way as to allow a sufficient venti-
lation space underneath the washing machine.
Connecting the electricity and wa-
ter supplies
Connecting the water inlet hose
1. Connect the supply
pipe by screwing it to
a cold water tab using
a ¾ gas threaded con-
nection (see figure).
Before performing the
connection, allow the
water to run freely until
it is perfectly clear.
2. Connect the inlet
hose to the washing
machine by screwing
it onto the correspon-
ding water inlet of the
appliance, which is si-
tuated on the top right-
hand side of the rear
part of the appliance
(see figure).
3. Make sure that the hose is not folded over
or bent.
! The water pressure at the tap must fall within
the values indicated in the Technical details table
(see next page).
! If the inlet hose is not long enough, contact a
specialised shop or an authorised technician.
! Never use second-hand hoses.
! Use the ones supplied with the machine.
Installation
3
GB
Connecting the drain hose
Connect the drain
hose, without bending
it, to a drainage duct or
a wall drain located at a
height between 65 and
100 cm from the floor;
alternatively, rest it on
the side of a washba-
sin or bathtub, faste-
ning the duct supplied
to the tap (see figure).
The free end of the
hose should not be
underwater.
! We advise against the use of hose extensions;
if it is absolutely necessary, the extension must
have the same diameter as the original hose and
must not exceed 150 cm in length.
Electrical connections
Before plugging the appliance into the electricity
socket, make sure that:
•the socket is earthed and complies with all
applicable laws;
•thesocketisabletowithstandthemaximum
power load of the appliance as indicated in the
Technical data table (see opposite);
thepowersupplyvoltagefallswithinthevalues
indicated in the Technical data table (see opposite);
•thesocketiscompatiblewiththeplugofthe
washing machine. If this is not the case, repla-
ce the socket or the plug.
! The washing machine must not be installed
outdoors, even in covered areas. It is extremely
dangerous to leave the appliance exposed to
rain, storms and other weather conditions.
! When the washing machine has been installed,
the electricity socket must be within easy reach.
! Do not use extension cords or multiple sockets.
! The cable should not be bent or compressed.
! The power supply cable must only be replaced
by authorised technicians.
Warning! The company shall not be held responsible
in the event that these regulations are not respected.
The first wash cycle
Once the appliance has been installed, and
before you use it for the first time, run a wash
cycle with detergent and no laundry, using the
wash cycle 2.
65 - 100 cm
Technical data
Model
IWCN 61051X9
Dimensions
width 59,5 cm
height 85 cm
depth 51,7 cm
Capacity
from 1 to 6 kg
Electrical
connections
please refer to the technical
data plate fixed to the machine
Water
connection
maximum pressure
1 MPa (10 bar)
minimum pressure
0.05 MPa (0.5 bar)
drum capacity 46 litres
Spin speed
up to 1000 rotations per
minute
Test wash
cycles in ac-
cordance with
regulations
1061/2010
and
1015/2010
Programme 3:
Cotton standard 60°C.
Programme 4:
Cotton standard 40°C.
This appliance conforms to
the following EC Directives:
- 2004/108/CE (Electroma-
gnetic
Compatibility)
- 2012/19/EU - WEEE
- 2006/95/EC Low Voltage)
4
GB
Care and maintenance
Cutting off the water and electricity
supplies
•Turnoffthewatertapaftereverywashcycle.
This will limit wear on the hydraulic system in-
side the washing machine and help to prevent
leaks.
•Unplugthewashingmachinewhencleaningit
and during all maintenance work.
Cleaning the washing machine
The outer parts and rubber components of the
appliance can be cleaned using a soft cloth
soaked in lukewarm soapy water. Do not use
solvents or abrasives.
Cleaning the detergent dispenser
drawer
Remove the dispenser
by raising it and pulling
it out (see figure).
Wash it under running
water; this operation
should be repeated
frequently.
Caring for the door and drum of
your appliance
•Alwaysleavetheportholedoorajarinorderto
prevent unpleasant odours from forming.
Cleaning the pump
The washing machine is fitted with a self-clea-
ning pump which does not require any mainte-
nance. Sometimes, small items (such as coins
or buttons) may fall into the pre-chamber which
protects the pump, situated in its bottom part.
! Make sure the wash cycle has finished and
unplug the appliance.
To access the pre-chamber:
1. using a screwdriver,
remove the cover pa-
nel on the lower front
part of the washing
machine (see figure);
2. unscrew the lid by
rotating it anti-clockwi-
se (see figure): a little
water may trickle out.
This is perfectly nor-
mal;
3. clean the inside thoroughly;
4. screw the lid back on;
5. reposition the panel, making sure the hooks
are securely in place before you push it onto the
appliance.
Checking the water inlet hose
Check the inlet hose at least once a year. If there
are any cracks, it should be replaced immedia-
tely: during the wash cycles, water pressure is
very strong and a cracked hose could easily
split open.
! Never use second-hand hoses.
5
GB
Precautions and tips
! This washing machine was designed and constructed in
accordance with international safety regulations. The fol-
lowing information is provided for safety reasons and must
therefore be read carefully.
General safety
• Thisappliancewasdesignedfordomesticuseonly.
This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
• Donottouchthemachinewhenbarefootorwithwetor
damp hands or feet.
• Donotpullonthepowersupplycablewhenunpluggingthe
appliance from the electricity socket. Hold the plug and pull.
• Do not open the detergent dispenser drawer while the
machine is in operation.
• Donottouchthedrainedwaterasitmayreachextremely
high temperatures.
• Neverforcetheportholedoor.Thiscoulddamagethesafety
lock mechanism designed to prevent accidental opening.
• Iftheappliancebreaksdown,donotunderanycircum-
stances access the internal mechanisms in an attempt to
repair it yourself.
• Alwayskeepchildrenwellawayfromtheappliancewhile
it is operating.
• Thedoorcanbecomequitehotduringthewashcycle.
• Iftheappliancehastobemoved,workinagroupoftwo
or three people and handle it with the utmost care. Never
try to do this alone, because the appliance is very heavy.
• Beforeloading laundryintothewashing machine,make
sure the drum is empty.
Disposal
• Disposingofthepackagingmaterials:observelocalregu-
lations so that the packaging may be re-used.
• TheEuropeanDirective2012/19/EU-WEEEonWasteElec-
trical and Electronic Equipment, requires that old household
electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must
be collected separately in order to optimise the recovery
and recycling of the materials they contain and reduce the
impact on human health and the environment. The crossed
out “wheeled bin” symbol on the product reminds you of
your obligation, that when you dispose of the appliance it
must be separately collected.
Consumers should contact their local authority or retailer
for information concerning the correct disposal of their old
appliance.
6
GB
Detergent dispenser drawer: used to dispense
detergents and washing additives (see “Detergents and
laundry”).
ON/OFF button: switches the washing machine on and
off.
WASH CYCLE knob: programmes the wash cycles. Du-
ring the wash cycle, the knob does not move.
FUNCTION buttons with indicator light: used to select the
available functions. The indicator light corresponding to the
selected function will remain lit.
TEMPERATURE knob: sets the temperature or the cold
wash cycle (see “Personalisation”).
SPIN SPEED knob: sets the spin speed or exclude the
spin cycle completely (see “Personalisation”).
WASH CYCLE PROGRESS/DELAY TIMER
indicator
light
s: used to monitor the progress of the wash cycle.
The illuminated indicator light shows which phase is in
progress.
If the Delay Timer function has been set, the time remai-
ning until the wash cycle starts will be indicated (see next
page).
DOOR LOCKED indicator light: indicates whether the
door may be opened or not (see next page).
START/PAUSE button with indicator light: starts or tem-
porarily interrupts the wash cycles.
N.B. To pause the wash cycle in progress, press this
button; the corresponding indicator light will flash orange,
while the indicator light for the current wash cycle phase
will remain lit in a fixed manner. If the DOOR LOCKED
indicator light is switched off, the door may be opened
(wait approximately 3 minutes).
To start the wash cycle from the point at which it was inter-
rupted, press this button again.
Standby mode
This washing machine, in compliance with new energy
saving regulations, is fitted with an automatic standby
system which is enabled after a few minutes if no activity is
detected. Press the ON-OFF button briefly and wait for the
machine to start up again.
Description of the washing
machine and starting a wash cycle
WASH CYCLE PROGRESS/
DELAY TIMER indicator lights
DOOR LOCKED
indicator light
START/
PAUSE
button with
indicator light
Control panel
Detergent dispenser drawer
ON/OFF
button
WASH CYCLE
knob
TEMPERATURE
knob
FUNCTION
buttons with
indicator lights
SPIN SPEED
knob
7
GB
Indicator lights
The indicator lights provide important information.
This is what they can tell you:
Delayed start
IftheDELAYTIMERfunctionhasbeenactivated(see “Per-
sonalisation”), after the wash cycle has been started the
indicator light corresponding to the selected delay period
will begin to flash:
Astimepasses,theremainingdelaywillbedisplayedand
the corresponding indicator light will flash:
The set programme will start once the selected time delay
has expired.
Wash cycle phase indicator lights
Once the desired wash cycle has been selected and has be-
gun, the indicator lights switch on one by one to indicate which
phase of the cycle is currently in progress.
Function buttons and corresponding indicator lights
When a function is selected, the corresponding indicator
light will illuminate.
If the selected function is not compatible with the program-
med wash cycle, the corresponding indicator light will flash
and the function will not be activated.
If the selected function is not compatible with another
function which has been selected previously, the indicator
light corresponding to the first function selected will
flash and only the second function will be activated; the
indicator light corresponding to the enabled option will
remain lit.
Door locked indicator light
When the indicator light is on, the porthole door is locked
to prevent it from being opened; make sure the indicator
light is off before opening the door (wait approximately 3
minutes). To open the door during a running wash cycle,
presstheSTART/PAUSEbutton;thedoormaybeopened
once the DOOR LOCKED indicator light turns off.
Starting a wash cycle
1. SwitchthewashingmachineonbypressingtheON/OFFbutton.Allindicatorlightswillswitchonforafewseconds,then
theywillswitchoffandtheSTART/PAUSEindicatorlightwillpulse.
2. Load the laundry and close the door.
3.SettheWASHCYCLEknobtothedesiredprogramme.
4. Set the washing temperature (see “Personalisation”).
5. Set the spin speed (see “Personalisation”).
6. Measure out the detergent and washing additives (see “Detergents and laundry”).
7. Select the desired functions.
8.StartthewashcyclebypressingtheSTART/PAUSEbuttonandthecorrespondingindicatorlightwillremainlitinafixed
manner, in green.
Tocancelthesetwashcycle,pausethemachinebypressingtheSTART/PAUSEbuttonandselectanewcycle.
9.Attheendofthewashcyclethe indicator light will switch on. The door can be opened once the DOOR LOCKED
indicator light turns off (wait approximately 3 minutes). Take out your laundry and leave the appliance door ajar to make sure
the drum dries completely. Switch the washing machine off by pressing the ON/OFF button.
Wash
Rinse
Spin
Drain
End of wash cycle
8
GB
Wash cycles
Table of wash cycles
Cotton Standard 20° (wash cycle 7) ideal for lightly soiled cotton loads. The effective performance levels achieved at cold
temperatures, which are comparable to washing at 40°, are guaranteed by a mechanical action which operates at varying
speed, with repeated and frequent peaks.
Express (wash cycle 11) this wash cycle was designed to wash lightly soiled garments quickly: it lasts just 15 minutes and
therefore saves both energy and time. By selecting this wash cycle (11 at 30°C), it is possible to wash different fabrics toge-
ther (except for wool and silk items), with a maximum load of 1,5 kg.
Sport Intensive (
wash cycle
12) is for washing heavily soiled sports clothing fabrics (tracksuits, shorts, etc.); for best
results, we recommend not exceeding the maximum load indicated in the “Table of wash cycles”.
Sport Light (
wash cycle
13) is for washing lightly soiled sports clothing fabrics (tracksuits, shorts, etc.); for best results,
we recommend not exceeding the maximum load indicated in the “Table of wash cycles”. We recommend using a
liquid detergent and dosage suitable for a half-load.
Special Shoes (
wash cycle
14) is for washing sports shoes; for best results, do not wash more than 2 pairs simulta-
neously.
1) Test wash cycle in compliance with regulations 1061/2010: set wash cycle 3 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with regulations 1061/2010: set wash cycle 4 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 4 with a temperature of 40°C.
3) Long wash cycle for synthetics: set wash cycle 6; with a temperature of 40°C.
* If you select programme and exclude the spin cycle, the machine will drain only.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
Wash cycles
Description of the wash cycle
Max.
temp.
C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual
dampness %
Energy
consumption
kWh
Total water lt
Cycle
duration
Prewash
Wash
Fabric
softener
Bleach
Daily
1
Cotton with prewash: extremely soiled whites. 90° 1000
-
6
62 1,90 68 155’
2
Cotton: extremely soiled whites. 90° 1000 -
6
62 1,8 62 140
3
Cotton Standard 60° (1): heavily soiled whites and resistant colours. 60° 1000 -
6
62 1,01 49,8 195’
4
Cotton Standard 40° (2): lightly soiled whites and delicate colours. 40° 1000 -
6
62 0,86 52 185’
5
Coloured Cottons: lightly soiled whites and delicate colours. 40° 1000 -
6
62 0,86 56 95
6
Synthetics: heavily soiled resistant colours. 60° 800 -
3
44 0,78 33 105’
6
Synthetics (3): lightly soiled resistant colours. 40° 800 -
3
44 0,49 38 95
7
Cotton Standard 20°: lightly soiled whites and delicate colours. 20° 1000 -
6
- - - 170’
Special
8
Wool: for wool, cashmere, etc. 40° 800 -
-
1,5
- - - 70
9
Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 -
-
1
- - - 55
10 Jeans
40° 800 -
-
3
- - - 75
11
Express: to refresh lightly soiled garments quickly (not suitable for wool, silk
and clothes which require washing by hand).
30° 800 -
-
1,5
71 0,12 27 15
Sport
12 Sport Intensive
30° 600 -
-
3
- - - 85
13 Sport Light
30° 600 -
-
3
- - - 60
14 Special Shoes
30° 600 -
-
Max.
2 pairs
- - - 55
Partial wash cycles
Rinse - 1000 - -
6
- - - 36
Spin + Drain - 1000 - - - -
6
- - - 10
Drain only *
- - - - -
6
- - - 3’
9
GB
Setting the temperature
TurntheTEMPERATUREknobtosetthewashtemperature(seeTable of wash cycles).
The temperature may be lowered, or even set to a cold wash .
The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value
set for each wash cycle.
Setting the spin speed
Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.
The maximum spin speeds available for each wash cycle are as follows:
Wash cycles Maximum spin speed
Cottons 1000 rpm
Synthetics 800 rpm
Wool 800 rpm
Silk drain only
The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol .
The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed
set for each wash cycle.
Functions
The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note:
- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will flash and
the function will not be activated.
- If the selected function is not compatible with another function which has been selected previously, the indicator light
corresponding to the first function selected will flash and only the second function will be activated; the indicator light
corresponding to the enabled option will remain lit.
Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled
cotton and synthetic fabrics (refer to the
“Table of wash cycles”
). “ ” enables you to wash in less time thereby saving
water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.
Stain removal
Bleaching cycle designed to remove the toughest stains. Please remember to pour the bleach into extra compartment 4 (see
“Bleach cycle”).
Extra rinse
By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
Delay timer
This timer delays the start time of the wash cycle by up to 12 hours.
Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. The fifth time the
button is pressed, the function will be disabled.
N.B.OncetheSTART/PAUSEbuttonhasbeenpressed,thedelaytimecanonlybemodifiedbydecreasingituntillaunching
the set programme.
Personalisation
10
GB
Detergents and laundry
Detergent dispenser drawer
Good washing results also depend on the correct dose of
detergent: adding too much detergent will not necessa-
rily result in a more efficient wash, and may in fact cause
build up on the inside of your appliance and contribute to
environmental pollution.
! Do not use hand washing detergents because these
create too much foam.
! Use powder detergent for white cotton garments, for pre-
washing, and for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
Open the detergent di-
spenser drawer and pour
in the detergent or washing
additive, as follows.
ompartment 1: Pre-wash detergent (powder)
Before pouring in the detergent, make sure that extra com-
partment 4 has been removed.
compartment 2: Detergent for the wash cycle
(powder or liquid)
Liquid detergent should only be poured in immediately
prior to the start of the wash cycle.
compartment 3: Additives (fabric softeners, etc.)
The fabric softener should not overflow the grid.
extra compartment 4: Bleach
Bleach cycle
! Traditional bleach should be used on sturdy white fa-
brics, and delicate bleach for coloured fabrics, synthetics
and for wool.
This option is particularly
useful for the removal of
stubborn stains. Place extra
compartment 4 (supplied)
into compartment 1.
When pouring in the
bleach, be careful not to
exceed the “max” level
marked on the central pivot
(see figure).
To run the bleach cycle on its own, pour the bleach into extra
compartment 4, set the “Rinse” programme and activate
the “Stain removal” option.
1
2
3
4
To bleach during a wash cycle, pour in the detergent and
any fabric softener you wish to use, set the desired wash
cycle and enable the “Stain removal” option.
The use of extra compartment 4 excludes the “Pre-wash”
option.
Preparing the laundry
•Dividethelaundryaccordingto:
- the type of fabric/the symbol on the label
- the colours: separate coloured garments from whites.
•Emptyallgarmentpocketsandcheckthebuttons.
• Donotexceedthelistedvalues,whichrefertothe
weight of the laundry when dry: see “Table of wash
cycles”.
How much does your laundry weigh?
1 sheet 400-500 g
1 pillow case 150-200 g
1 tablecloth 400-500 g
1 bathrobe 900-1200 g
1 towel 150-250 g
Garments requiring special care
Wool: all wool garments can be washed using programme
8, even those carrying the “hand-wash only” label. For
best results, use special detergents and do not exceed
1,5 kg of laundry.
Silk: use special wash cycle 9 to wash all silk garments.
We recommend the use of special detergent which has
been designed to wash delicate clothes.
Curtains: fold curtains and place them in a pillow case or
mesh bag. Use wash cycle 9.
Jeans: Turn garments inside-out before washing and use
a liquid detergent. Use programme 10.
Load balancing system
Before every spin cycle, to avoid excessive vibrations and
to distribute the load in a uniform manner, the drum rotates
continuously at a speed which is slightly greater than the
washing rotation speed. If, after several attempts, the load
is not balanced correctly, the machine spins at a reduced
spin speed. If the load is excessively unbalanced, the
washing machine performs the distribution process instead
of spinning. To encourage improved load distribution and
balance, we recommend small and large garments are
mixed in the load.
11
GB
Troubleshooting
Yourwashingmachinecouldfailtowork.BeforecontactingtheTechnicalAssistanceCentre(see “Assistance”), make sure
that the problem cannot be solved easily using the following list.
Problem:
The washing machine does not
switch on.
The wash cycle does not start.
The washing machine does not
take in water (the indicator light for
the first wash cycle stage flashes
rapidly).
The washing machine continuously
takes in and drains water.
The washing machine does not
drain or spin.
The washing machine vibrates a lot
during the spin cycle.
The washing machine leaks.
The “optionindicator lights and the
“start/pause” indicator light flash,
while one of the “phase in progress”
indicator lights and the “door lo-
ckedindicator light will remain lit in
a fixed manner.
There is too much foam.
Possible causes / Solutions:
• Theapplianceisnotpluggedintothesocketfully,orisnotmakingcontact.
• Thereisnopowerinthehouse.
• Thewashingmachinedoorisnotclosedproperly.
• TheON/OFFbuttonhasnotbeenpressed.
• TheSTART/PAUSEbuttonhasnotbeenpressed.
• Thewatertaphasnotbeenopened.
• Adelayedstarthasbeenset(see “Personalisation”).
• Thewaterinlethoseisnotconnectedtothetap.
• Thehoseisbent.
• Thewatertaphasnotbeenopened.
• Thereisnowatersupplyinthehouse.
• Thepressureistoolow.
• TheSTART/PAUSEbuttonhasnotbeenpressed.
• Thedrainhoseisnotfittedataheightbetween65and100cmfromthefloor
(see “Installation”).
• Thefreeendofthehoseisunderwater(see “Installation”).
• Thewalldrainagesystemisnotfittedwithabreatherpipe.
If the problem persists even after these checks, turn off the water tap, switch
theapplianceoffandcontacttheAssistanceService.Ifthedwellingisononeof
the upper floors of a building, there may be problems relating to water drainage,
causing the washing machine to fill with water and drain continuously. Special
anti-draining valves are available in shops and help to avoid this inconvenience.
• Thewashcycledoesnotincludedraining:somewashcyclesrequirethedrain
phase to be started manually.
• Thedrainhoseisbent(see “Installation”).
• Thedrainageductisclogged.
• Thedrumwasnotunlockedcorrectlyduringinstallation(see “Installation”).
• Thewashingmachineisnotlevel(see “Installation”).
Thewashingmachineistrappedbetweencabinetsandwalls(see “Installation”).
• Thewaterinlethoseisnotscrewedonproperly(see “Installation”).
• Thedetergentdispenserdrawerisblocked(forcleaninginstructions,see
“Care and maintenance”).
• Thedrainhoseisnotfixedproperly(see “Installation”).
• Switchoffthemachineandunplugit,waitforapproximately1minuteand
then switch it back on again.
Iftheproblempersists,contacttheTechnicalAssistanceService.
• Thedetergentisnotsuitableformachinewashing(itshoulddisplaythetext
“for washing machines” or “hand and machine wash”, or the like).
• Toomuchdetergentwasused.
12
GB
Service
Before calling for Assistance:
• Check whether you can solve the problem alone (see “Troubleshooting”);
• Restarttheprogrammetocheckwhethertheproblemhasbeensolved;
• Ifthisisnotthecase,contactanauthorisedTechnicalAssistanceCentreusingthetelephonenumberprovidedonthe
guarantee certificate.
! Alwaysrequesttheassistanceofauthorisedtechnicians.
Have the following information to hand:
• thetypeofproblem;
• theappliancemodel(Mod.);
• theserialnumber(S/N).
This information can be found on the data plate applied to the rear of the washing machine, and can also be found on the
front of the appliance by opening the door.
SK
13
Slovensky
Obsah
Inštalácia, 14-15
Rozbalenie a vyrovnanie do vodorovnej polohy
Pripojenie k elektrickej a k vodovodnej sieti
Prvý prací cyklus
Technické údaje
Údržba a starostlivosť, 16
Uzavretie prívodu vody a vypnutie elektrického napájania
Čistenie práčky
Čistenie dávkovača pracích prostriedkov
Starostlivosť o dvierka a bubon
Čistenie čerpadla
Skontrolujte prítokovú hadicu vodu
Opatrenia a rady, 17
Základné bezpečnostné pokyny
Likvidácia
Popis práčky a zahájenie pracieho programu,
18-19
Ovládací panel
Kontrolky
Zahájenie pracieho programu
Pracie programy, 20
Tabuľka pracích programov
Užívateľské nastavenia, 21
Nastavenie teploty
Nastavenie odstreďovania
Funkcie
Pracie prostriedky a prádlo, 22
Dávkovač pracích prostriedkov
Bieliaci cyklus
Príprava prádla
Prádlo vyžadujúce osobitnú starostlivosť
Systém automatického vyváženia náplne
Poruchy a spôsob ich odstránenia, 23
Servisná služba, 24
SK
IWCN 61051X9
Návod na použitie
PRÁČKA
14
SK
Inštalácia
! Je veľmi dôležité uschovať tento návod
kvôli prípadnému ďalšiemu použitiu. V prípa-
de predaja, darovania alebo presťahovania
práčky sa uistite, že zostane uložený v jej
blízkosti, aby mohol poslúžiť novému
majiteľovi pri oboznámení sa s činnosťou a
s príslušnými upozorneniami.
! Pozorne si prečítajte uvedené pokyny:
obsahujú dôležité informácie, týkajúce sa
inštalácie, použitia a bezpečnosti pri práci.
Rozbalenie a vyrovnanie do vodoro-
vnej polohy
Rozbalenie
1. Rozbaľte práčku.
2. Skontrolujte, či počas prepravy
nedošlo k jej poškodeniu. V prípade, že je
poškodená, nezapájajte ju a obráťte sa na
predajcu.
3. Odstráňte 3
skrutky slúžiace
na ochranu počas
prepravy a gu-
movú podložku
s príslušným
dištančným členom,
ktoré sa nachádzajú
v zadnej časti (viď
obrázok).
4. Uzatvorte otvory po skrutkách plastovými
krytkami z príslušenstva.
5. Uschovajte všetky diely: v prípade opäto-
vnej prepravy práčky ich bude potrebné
opätovne namontovať.
! Obaly nie sú hračky pre deti!
Vyrovnanie do vodorovnej polohy
1. Práčku je potrebné umiestniť na rovnú a
pevnú podlahu tak, aby nebola opretá o ste-
nu, nábytok alebo o niečo iné.
2. V prípade, že
podlaha nie je do-
konale vodorovná,
môžu byť prípadné
rozdiely vykompen-
zované skrutkovaním
predných nožičiek
(viď obrázok); Uhol
sklonu, nameraný na
pracovnej ploche, ne-
smie presiahnuť 2°.
Dokonalé vyrovnanie do vodorovnej polohy
zabezpečí stabilitu zariadenia a zamedzí vz-
niku vibrácií a hluku počas činnosti. V prípa-
de inštalácie na podlahovú krytinu alebo
na koberec, nastavte nožičky tak, aby pod
práčkou zostal dostatočný voľný priestor na
ventiláciu.
Pripojenie k elektrickej a k vodo-
vodnej sieti
Pripojenie prítokovej hadice vody
1. Pripojte prívodnú
hadicu jej zaskrutko-
vaním ku kohútiku
so studenou vody
s hrdlom so závitom
3/4“ (viď obrázok).
Pred pripojením
hadice nechajte vodu
odtiecť, až kým nebu-
de číra.
2. Pripojte prítokovú
hadicu k pračke, jej
zaskrutkovaním k
príslušnej prípojke
na vodu, umiestne-
nej vpravo hore (viď
obrázok).
3. Zabezpečte, aby hadica nebola príliš oh-
nutá alebo stlačená.
! Tlak v rozvode vody sa musí pohybovať
v rozmedzí hodnôt uvedených v tabuľke s
technickými údajmi (viď vedľajšia strana).
! V prípade, že dĺžka prítokovej hadice nebu-
de dostatočná, obráťte sa na špecializovanú
predajňu alebo na autorizovaný technický
personál.
! Nikdy nepoužívajte už použité hadice.
! Používajte hadice z príslušenstva zariade-
nia.
SK
15
65 - 100 cm
Pripojenie vypúšťacej hadice
Pripojte vypúšťaciu
hadicu, bez toho aby
ste ju ohli, k odpado-
vému potrubiu alebo
k odpadu v stene,
ktorý sa nachádza
od 65 do 100 cm nad
zemou;
alebo ju uchyťte k
okraju umývadla
či vane, a pripev-
nite vodiaci držiak
z príslušenstva ku
kohútu (viď obrá-
zok). Voľný koniec
vypúšťacej hadice
nesmie zostať pono-
rený do vody.
! Použitie predlžovacích hadíc sa
neodporúča; ak je však nevyhnutné,
predlžovacia hadica musí mať rovnaký prie-
mer ako originálna hadica a jej dĺžka nesmie
presiahnuť 150 cm.
Pripojenie k elektrickej sieti
Pred zasunutím zástrčky do zásuvky sa uisti-
te, že:
zásuvka je uzemnená a že vyhovuje nor-
mám;
zásuvka je schopná uniesť maximálnu
záťaž odpovedajúcu menovitému príkonu
zariadenia, uvedenému v tabuľke s tech-
nickými údajmi (viď vedľa);
hodnota napájacieho napätia odpovedá
údajom uvedeným v tabuľke s technickými
údajmi (viď vedľa);
zásuvka je kompatibilná so zástrčkou
práčky. V opačnom prípade je potrebné
vymeniť zásuvku alebo zástrčku.
! Práčka nesmie byť umiestnená vonku – pod
holým nebom, a to ani v prípade, keby sa
jednalo o miesto chránené pred nepriazňou
počasia, pretože je veľmi nebezpečné
vystaviť ju dažďu a búrkam.
! Po ukončení inštalácie musí zásuvka zostať
ľahko prístupná.
! Nepoužívajte predlžovacieble a rozvodky.
! Kábel nesmie byť ohnutý alebo pritlačený.
! Výmena kábla musí byť zverená výhradne
autorizovanému technickému personálu.
Upozornenie! Výrobca neponesie žiadnu
zodpovednosť za následky spôsobené
nerešpektovaním týchto pokynov.
Prvý prací cyklus
Po inštalácii zariadenia je potrebné ešte pred
jeho použitím vykonať jeden skúšobný cyklus
s pracím prostriedkom a bez náplne prádla,
nastavením pracieho programu 2.
Technické údaje
Model IWCN 61051X9
Rozmery
šírka 59,5 cm
výška 85 cm
hĺbka 51,7 cm
Kapacita od 1 do 6 kg
Elektrické za-
pojeni
Viď štítok s technickými
údajmi, aplikovaný na
zariadení.
Pripojenie k
rozvodu vody
maximálny tlak
1 MPa (10 bar)
maximálny tlak
0,05 MPa (0.5 bar)
kapacita bubna 46 litrov
Rýchlost
odstreďovania
Až do 1000 otáčok za
minútu
Kontrolné
programy
podľa predpisy
1061/2010 a
1015/2010
Program 3: štandardný pro-
gram pre bavlnu pri 60°C.
Program 4: štandardný pro-
gram pre bavlnu pri 40°C.
Toto zariadenie je v zhode
s nasledujúcimi smernicami
Európskej únie:
- 2004/108/CE (Elektroma-
gnetická kompatibilita)
- 2006/95/CE (Nízke napätie)
- 2012/19/EU - WEEE
16
SK
Uzavretie prívodu vody a vypnutie
elektrického napájania
Po každom praní uzatvorte prívod vody.
Týmto spôsobom sa znižuje opotrebe-
nie rozvodu vody zariadenia a znížuje sa
nebezpečenstvo úniku vody.
Pred zahájením čistenia práčky a počas
údržby je potrebné vytiahnzástrčku
prívodho kábla zo zásuvky.
Čistenie práčky
Vonkajšie časti a časti z gumy môžu byť
čistené utierkou navlhčenou vo vlažnej vode
a saponáte. Nepoužívajte rozpúšťadlá alebo
abrazívne prostriedky.
Čistenie dávkovača pracích prostri-
edkov
Vytiahnite dávkovač
jeho nadvihnutím a
vytiahnutím smerom
von (viď obrázok).
Dávkovač umyte pod
prúdom vody; toto
čistenie je potrebné
vykonávať pravidel-
ne.
Starostlivosť o dvierka a bubon
Dvierka ponechajte zakaždým pootvorené,
aby sa zabránilo tvorbe nepríjemných
zápachov.
Čistenie čerpadla
Súčasťou práčky je samočistiace čerpadlo,
ktoré nevyžaduje údržbu. Môže sa však
stať, že sa v jeho vstupnej ochrannej časti,
nachádzajúcej na spodku, zachytia drobné
predmety (mince, gombíky).
! Uistite sa, že prací cyklus bol ukončený a
vytiahnite zástrčku zo zásuvky.
Prístup k vstupnej časti čerpadla:
1. pomocou
skrutkovača
odstráňte krycí pa-
nel, nachádzajúci
sa v prednej časti
práčky
(viď obrázok);
2. odskrutkujte veko
otáčaním proti smeru
hodinových ručičiek
(viď obrázok):
vytečenie malého
množstva vody je
úplne bežným javom;
3. dokonale vyčistite vnútro;
4. nasaďte naspäť veko;
5. namontujte naspäť krycí panel, pričom
sa pred jeho prisunutím k práčke uistite, že
došlo k správnemu zachyteniu háčikov do
príslušných otvorov.
Skontrolujte prítokovú hadicu vodu
Stav prítokovej hadice je potrebné
skontrolovať aspoň raz ročne. Ak sú na nej
viditeľné praskliny alebo trhliny, je potrebné
ju vymeniť: silný tlak v hadici počas pracieho
cyklu by mohol spôsobiť jej náhle roztrhnutie.
! Nikdy nepoužívajte už použité hadice.
Údržba a starostlivosť
SK
17
Opatrenia a rady
! Práčka bola navrhnutá a vyrobená v súlade s platný-
mi medzinárodnými bezpečnostnými predpismi. Tieto
upozornenia sú uvádzané z bezpečnostných dôvodov a
je potrebné si ich pozorne prečítať.
Základné bezpečnostné pokyny
• Toto zariadenie bolo navrhnuté výhradne na použitie
ako spotrebič.
Toto zariadenie smú používať deti
od 8 rokov, osoby náležite vyškolené
ohľadne bezpečného použitia zaria-
denia, ktoré si uvedomujú súvisiace
nebezpečenstvo a v prípade dozoru aj
osoby so zníženými fyzickými, senzorický-
mi alebo duševnými schopnosťami alebo
osoby s nedostatočnými skúsenosťami a
znalosťami. Deti sa so zariadením nesmú
hrať. Operácie údržby a čistenia nesmú
vykonávať deti bez dohľadu.
• Nedotýkajte sa zariadenia bosí, alebo v prípade, keď
máte mokré ruky alebo nohy.
• Nevyťahujte zástrčku zo zásuvky ťahaním za kábel, ale
uchopením za zástrčku.
• Neotvárajte dávkovač pracích prostriedkov počas
činnosti zariadenia.
• Nedotýkajte sa odčerpávanej vody, pretože môže mať
veľmi vysokú teplotu.
• V žiadnom prípade sa nepokúšajte o násilné otvorenie
dvierok: mohlo by dôjsť k poškodeniu bezpečnostného
uzáveru, ktorý zabraňuje náhodnému otvoreniu.
• Pri výskyte poruchy sa v žiadnom prípade nepokúšajte
o opravu vnútorných častí zariadenia.
• Vždy majte pod kontrolou deti a zabráňte tomu, aby sa
približovali k zariadeniu pas pracieho cyklu.
• Počas pracieho cyklu majú dvierka tendenciu zohrievať
sa.
• Ak je potrebné ju presunúť, je dobré poveriť dve alebo
tri osoby a vykonať to s maximálnou pozornosťou.
Nikdy sa nepokúšajte zariadenie premiestňovať sami,
pretože je veľmi ťažké.
• Pred zahájením vkladania prádla skontrolujte, či je
bubon prázdny.
Likvidácia
• Likvidácia obalových materiálov: pri ich odstránení
postupujte v súlade s miestnymi predpismi a dbajte na
možnú recykláciu.
Európska smernica 2012/19/EU - WEEE o odpadových
elektrických a elektronických zariadeniach stanovuje,
že staré domáce elektrické spotrebiče nesmú byť od-
kladané do běžného netriedeného domového odpadu.
Staré spotrebiče musia byť odovzdané do oddeleného
zberu a to za účelom recykláce a optimálneho využitia
materiálov, ktoré obsahujú, z dôvodu prevencie nega-
tívneho dopadu na ľudské zdravie a životné prostredie.
Symbol “prečiarknutej popolnice” na výrobku Vás
upozorňuje na povinnosť odovzdať zariadenie po
skončení jeho životnosti do oddeleného zberu.
Spotrebitelia majú povinnosť kontaktovať ich lokálny
úrad alebo maloobchod kvôli informáciám týkajúcich
sa správnemu odovzdaniu a likvidácie ich starých
spotrebičov.
18
SK
Dávkovač pracích prostriedkov: slúži na dávkovanie
pracích prostriedkov a prídavných prostriedkov (viď „Pra-
cie prostriedky a prádlo“).
Tlačidlo ON/OFF: slúži na zapnutie a vypnutie práčky.
Otočný ovládač PROGRAMOV: pre nastavenie pracích
programov. Počas pracieho programu zostane v rovnakej
polohe.
FUNKČNÉ tlačidlá s kontrolkami: Slúžia na voľbu jed-
notlivých dostupných funkcií. Kontrolka zvolenej funkcie
zostane rozsvietená.
Otočný ovládač ODSTREĎOVANIA: slúži na nastavenie
odstreďovania alebo na jeho vylúčenie (viď „Užívateľské
nastavenia“).
Ot ovdač TEPLOTY: slúži na nastavenie te-
ploty alebo prania alebo prania v studenej vode (viď
„Užívateľské nastavenia“).
Kontrolky POSTUPU PRACIEHO CYKLU/ONESKO-
RENÉHO ŠTARTU: slúžia na kontrolu postupu pracieho
programu.
Rozsvietená kontrolka poukazuje na prebiehajúcu fázu.
Ak je nastavená funkcia „Oneskoreného štartu“, budú
zobrazovať čas zostávajúci do zahájenia programu (viď
vedľajšia strana).
Kontrolka ZABLOKOVANIA DVIEROK: informuje o tom,
či je možné otvoriť dvierka (viď vedľajšia strana).
Tlačidlo s kontrolkou START/PAUSE: slúži na zahájenie
alebo na dočasné prerušenie programov.
POZN.: Stlačenie tohoto tlačidla slúži na prerušenie
prebiehajúceho prania; príslušná kontrolka bude blikať
oranžovým svetlom, zatiaľ čo kontrolka prebiehajúcej
fázy zostane rozsvietená stálym svetlom. Keď bude
kontrolka ZABLOKOVANIA DVIEROK zhasnutá, bude
možné otvoriť dvierka (vyčkajte približne 3 minúty).
Pre opätovné zahájenie prania z bodu, v ktorom bolo
prerušené, opätovne stlačte toto tlačidlo.
Pohotovostný režim
Po skoncení cyklu alebo v case, ked nie je spustený
žiaden cyklus, po 30 minútach dôjde k vypnutiu zaria-
denia kvôli energetickej úspore. Na obnovenie cinnosti
zariadenia, nachádzajúceho sa v pohotovostnom režime,
stací stlacit tlacidlo ON/OFF.
Popis práčky a zahájenie
pracieho programu
Kontrolky POSTUPU
PRACIEHO CYKLU/
ONESKORENÉHO
ŠTARTU
Kontrolka
ZABLOKOVANIA
DVIEROK
Tlačidlo s
kontrolkou
START/
PAUSE
Ovládací panel
Tlačidlo
ON/OFF
FUNKČNÉ
tlačidlá s kontrolkami
Dávkovač pracích
prostriedkov
Otočný ovládač PRO-
GRAMOV
Otočný ovládač
TEPLOTY
Otočný ovládač
ODSTREĎOVANIA
SK
19
Kontrolky
Kontrolký sú zdrojom dôležitých informácií.
Informujú o nasledujúcich skutočnostiach:
Oneskorený štart
Keď bola aktivovaná funkcia „Oneskoreného štartu“ (viď
„Užívateľské nastavenia“), po zahájení pracieho progra-
mu začne blikať príslušná kontrolka zvoleného onesko-
renia:
Priebežne bude zobrazovaný čas zostávajúci do štartu,
a zobrazovanie bude sprevádzané blikaním príslušnej
kontrolky:
Po uplynu zvolenej doby oneskorenia jde k zahájeniu
nastaveného programu.
Kontrolky prebiehajúcej fázy
Po zvolení a zahájení požadovaného pracieho cyklu
dôjde k postupnému rozsvecovaniu kontroliek informu-
júcich o jeho postupe.
Funkčné tlačidlá a príslušné kontrolky
Po zvolení konkrétnej funkcie dôjde k rozsvieteniu
príslušnej kontrolky.
Keď zvolenú funkciu nie je možné zaradiť do nasta-
veného programu, príslušná kontrolka bude blikať, bude-
te počuť akustický signál a funkcia nebude aktivovaná.
V prípade, že zvolená funkcia nie je kompatibilná s inou
predtým zvolenou funkciou, kontrolka prvej voliteľnej
funkcie bude blikať a bude aktivovaná len druhá, pričom
kontrolka zvolenej funkcie sa rozsvieti stálym svetlom.
Kontrolka zablokovania dvierok
Rozsvietenie tejto kontrolky signalizuje, že dvierka sú
zaistené kvôli zamedzeniu ich náhodnému otvoreniu;
aby sa dvierka nepoškodili, pred ich otvorením je potreb-
né vyčkať, kým uvedená kontrolka nezhasne; (vyčkajte
približne 3 minúty). Na otvorenie dvierok v priebehu
pracieho cyklu stlačte tlačidlo START/PAUSE; keď bude
kontrolka ZAISTENÉ DVIERKA zhasnutá, bude možné
dvierka otvoriť.
Zahájenie pracieho programu
1. Zapnite práčku stlačením tlačidla ON/OFF. Všetky kontrolky sa rozsvietia na niekoľko sekúnd, potom zhasnú a bude
blikať kontrolka START/PAUSE.
2. Naplňte pračku a zatvorte dvierka.
3. Otočným ovládačom PROGRAMOV zvoľte požadovaný prací program.
4. Nastavte teplotu prania (viď „Užívateľské nastavenia“).
5. Nastavte rýchlosť odstreďovania (viď „Užívateľské nastavenia“).
6. slúži na dávkovanie pracieho prostriedku a prídavných prostriedkov (viď „Pracie prostriedky a prádlo“).
7. Zvoľte požadované funkcie.
8. Zahájte prací program stlačením tlačidla START/PAUSEa príslušná kontrolka zostane rozsvietená stálym svetlom ze-
lenej farby. Zrušenie nastaveného pracieho cyklu sa vykonáva prerušením činnosti zariadenia stlačením tlačidla START/
PAUSEa voľbou nového cyklu.
9. Po ukončení pracieho programu sa rozsvieti kontrolka . Po zhasnutí kontrolky ZABLOKOVANIA DVIEROK bude
možné dvierka otvoriť (vyčkajte približne 3 minúty). Vytiahnite prádlo a nechajte dvierka pootvorené, aby bolo umožnené
vysušenie bubna.
Zapnite práčku stlačením tlačidla ON/OFF.
Pranie
Plákanie
Odstreďovanie
Odčerpanie vody
Ukončenie prania
20
SK
Pracie programy
Štandardný program pre bavlnu pri 20 °C (program 7) ideálny pre náplne zo znečistenej bavlny. Účinné pranie i za
studena, porovnateľné s praním pri 40 °C, dosiahnuté mechanickým pôsobením, ktoré je založené na zmene rýchlosti v
krátkych alebo dlhých intervaloch.
Express (program 11) bol navrhnutý na pranie ľahko znečisteného prádla v priebehu krátkej doby: trvá len 15 minút a
šetrí tak energiu aj čas. Nastavením programu (11 pri 30°C) je možné prať spolu prádlo z tkanín rôzneho druhu (s výni-
mkou vlny a hodvábu) s maximálnou náplňou 1,5 kg.
Sport Intensive (program 12) bol navrhnutý pre pranie veľmi znečistených látok športového oblečenia (teplákové
súpravy, šortky apod.); pre dosiahnutie optimálnych výsledkov sa odporúča neprekračovať maximálnu náplň uvedenú v
“Tabuľka pracích programov”.
Sport Light (program 13) bol navrhnutý pre pranie málo znečistených látok športového oblečenia (teplákové súpravy,
šortky apod.); pre dosiahnutie optimálnych výsledkov sa odporúča neprekračovať maximálnu náplň uvedenú v “Tabuľka
pracích programov”. Odporúča sa použiť tekutý prací prostriedok a použiť dávku vhodnú pre polovičnú náplň.
Sport Shoes (program 14) bol navrhnutý pre pranie športovej obuvi; pre dosiahnutie optimálnych výsledkov neperte viac
ako 2 páry naraz.
Tabuľka pracích programov
Pracie
programy
Popis programu
Max.
Teplota
(°C)
Max. rýchlost
(otácky za
minútu)
Pracie prostriedky
Max. nápln
(kg)
Zvyšková
vlhkos %
Spotreba ener-
gie kWh
Voda celkom lt
Doba trvania
cyklu
Pred-
pranie
Pranie
Avivaz
Bielaci
Denně (Daily)
1 Bavlna + Predpranie: Mimoriadne špinavé biele prádlo.
90° 1000
-
6
62 1,90 68 155’
2 Bavlna: Mimoriadne špinavé biele prádlo.
90° 1000 -
6
62 1,8 62 140’
3
Štandardný program pre bavlnu pri 60 °C (1): Znacne špina
biele a farebné prádlo z odolných tkanín.
60° 1000 -
6
62 1,01 49,8 195’
4
Štandardný program pre bavlnu pri 40 °C (2) Znacne špina
biele a farebné prádlo z chúlostivých tkanín.
40° 1000 -
6
62 0,86 52 185’
5 Farebná bavlna: Málo špinavé biele chúlostivé prádlo.
40° 1000 -
6
62 0,86 56 95’
6 Syntetika: Vel’mi špinavé farebné prádlo z odolných tkanín.
60° 800 -
3
44 0,78 33 105’
6 Syntetika (3): Ciastocne špinafarebné prádlo z odolných tkanín.
40° 800 -
3
44 0,49 38 95’
7
Štandardný program pre bavlnu pri 20 °C: Znacne špinavé biele a
farebné prádlo z chúlostivých tkanín.
20° 1000 -
6
- - - 170
Špeciálne programy (Special)
8 Vlna: Pre vlnu, kašmír, atd.
40° 800 -
-
1,5
- - - 70
9
HODVÁB/ZÁCLONY: Pre prádlo z hodvábu, viskózy, spod pdlo.
30° 0 -
-
1
- - - 55
10 Jeans
40° 800 -
-
3
- - - 75
11
Express:
K rýchlemu oziveniu ¾ahko zneèisteného prádla (nedoporuèuje
sa pre vlnu, hodváb a prádlo urèené na pranie v rukách).
30° 800 -
-
1,5
71 0,12 27 15’
Sport
12
Sport Intensive
30° 600 -
-
3
- - - 85
13
Sport Light
30° 600 -
-
3
- - - 60
14
Sport Shoes
30° 600 -
-
(Max. 2
ry.)
- - - 55
Dielcie programy
Plákanie
- 1000 - -
6
- - - 36
Odstred'ovanie + Odcerpanie vody
- 1000 - - - -
6
- - - 10
Samostat odčerpanie vody *
- - - - -
6
- - - 3
* V prípade voľby programu a vylúčenia odstreďovania, zariadenie vykoná len odčerpanie vody.
Doba trvania cyklu, uvedená na displeji alebo v návode, je stanovená na základe štandardných podmienok. Skutočná doba sa môže meniť v závislosti na mnohých
faktoroch, ako sú napr. teplota a tlak vody na vstupe, teplota prostredia, množstvo pracieho prostriedku, množstvo a druh náplne, vyváženie náplne a zvolené funkcie.
1) Kontrolný program podľa predpisy 1061/2010: nastavte program 3 s teplotou 60°C.
Tento cyklus je vhodný pre pranie bežne znečisteného bavlneného prádla a jedná sa o najúčinnejší cyklus z hľadiska kombinovanej spotreby
energie a vody, určený pre prádlo, ktoré je možné prať pri teplote do 60°C . Skutočná teplota prania sa môže líšiť od uvedenej.
2) Kontrolný program podľa predpisy 1061/2010: nastavte program 4 s teplotou 40°C.
Tento cyklus je vhodný pre pranie bežne znečisteného bavlneného prádla a jedná sa o najúčinnejší cyklus z hľadiska kombinovanej spotreby
energie a vody, určený pre prádlo, ktoré je možné prať pri teplote do 40°C . Skutočná teplota prania sa môže líšiť od uvedenej.
Pre všetky Test Institutes:
2) Dlhý program na pranie bavlny: nastavte program 4 s teplotou 40°C.
3) Syntetický program spolu: nastavte program 6 s teplotou 40°C.
1 / 1

Indesit IWCN 61051X9 EU Manualul utilizatorului

Categorie
Mașini de spălat
Tip
Manualul utilizatorului