Yamaha MOXF6 Manualul proprietarului

Categorie
Software
Tip
Manualul proprietarului

Acest manual este potrivit și pentru

MOXF6/MOXF8 Editor Owner’s Manual 1
Contents
What is the MOXF6/MOXF8 Editor? ........................................2
Data Structure of the MOXF6/MOXF8 Editor ..........................3
Starting the MOXF6/MOXF8 Editor (VST version)..................4
An Example of MOXF6/MOXF8 Editor in Use.........................7
MOXF6/MOXF8 Editor Window ..............................................13
Basic Operations....................................................................33
Menu ........................................................................................35
Tips ..........................................................................................51
• Recording to Cubase MIDI tracks with the MOXF6/MOXF8 Editor VST
• Recording/Editing Arpeggio playback as MIDI data on Cubase
Troubleshooting .....................................................................57
Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal
use.
The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.
Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written
consent of the manufacturer.
Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held
responsible for the results of the use of this manual and the software.
The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from the
screens which appear on your computer.
Windows is the registered trademarks of Microsoft
®
Corporation.
Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.
The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective
companies.
Click on the blue-colored text to jump to the related item in this manual.
This owner’s manual assumes that you are already familiar with basic Windows/Mac operations. If you are not,
please refer to the owner’s manual which came with your Windows/Mac software before using the MOXF6/MOXF8
Editor.
For information about hardware requirements, the interconnection of devices and the installation of the MOXF6/
MOXF8 Editor software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective
MIDI device.
MOXF6/MOXF8 Editor
Owner’s Manual
MOXF6/MOXF8 Editor
Owner’s Manual
What is the MOXF6/MOXF8 Editor?
MOXF6/MOXF8 Editor Owner’s Manual
2
What is the MOXF6/MOXF8 Editor?
MOXF6/MOXF8 Editor is a convenient tool which lets you edit and save the various parameters of your
MOXF6/MOXF8 tone generator. These include Voice and Mixing parameters (edited in the Voice or Mixing
mode of the MOXF6/MOXF8) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-
understand graphical interface, you can edit various parameters of the MOXF6/MOXF8 right from your
computer — using the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the
computer keyboard. Finally, all the changes you have made can be saved to your computer or transmitted to
the MOXF6/MOXF8 instrument.
The MOXF6/MOXF8 Editor, based on the “VST3 technology” by Steinberg, works as a VST3 plug-in with the
Cubase series. The MOXF6/MOXF8 Editor also works as the same way as other VST instrument software,
allowing you to save the edited settings of the MOXF6/MOXF8, or use them for another project. In addition,
you can handle the MOXF6/MOXF8 Voices in the Media Bay window in Cubase series when using the
MOXF6/MOXF8 Editor with Cubase series, allowing you to search for, listen, and load the MOXF6/MOXF8
Voices within Media Bay in Cubase series. The MOXF6/MOXF8 Editor provides a comprehensive and
seamless music production environment — making the use of hardware and software both easier and much
more efficient. And, the MOXF6/MOXF8 Editor can also be used as a stand-alone application.
The MOXF6/MOXF8 Editor lets you adjust the hue as desired (page 6). This manual uses example screen
shots having the most universal color visibility, allowing the manual to be easily viewed by many people
having different types of color recognition.
Default Adjusted to universal hue
Data Structure of the MOXF6/MOXF8 Editor
MOXF6/MOXF8 Editor Owner’s Manual
3
Data Structure of the MOXF6/MOXF8 Editor
The MOXF6/MOXF8 Editor lets you create the following data and save them as a single file (extension: .X6E).
Current Global data (latest status of edited global parameters)
Current data in the Voice mode (latest status of edited Voice)
Current data in the Song/Pattern mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices)
User Voice data (consisting of three Normal Voice Banks and one Drum Voice Bank)
Current settings includes the latest settings of the Common and Element parameters for the Voice last assigned to
each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for
each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The MOXF6/
MOXF8 Editor lets you edit parameters (including Element parameters) of the Voice assigned to each Part and
save the latest edit status as a file without storing it as a User Voice or a Mixing Voice. This means that you can
easily recall the latest status of the previous edit simply by opening the file.
n The MOXF6/MOXF8 Editor handles the Global data which includes some of the parameters shown on the “G” row in the
Mixer section and all the parameters in the Global Settings of the Parameter Category section (pages 19 and 27).
The diagram illustrated below indicates the structure of the data created via the MOXF6/MOXF8 Editor, the
structure of the data stored in the internal memory of the MOXF6/MOXF8 instrument and the relationship
between those two types of data.
*1 When the MOXF6/MOXF8 instrument is connected to the computer properly with the ONLINE status, editing a parameter on the MOXF6/MOXF8 Editor affects the same parameter on the MOXF6/
MOXF8 itself, and vice versa.
*2 The Store Voice operation on the Editor will store the Voice data to the memory of the MOXF6/MOXF8 instrument as well as the memory of the Editor.
*3 The Store Global operation and Store Mixing operation will store the data only to the memory of the MOXF6/MOXF8 instrument.
MOXF6/MOXF8 Editor (VST3 Plug-in, Stand-alone)
Current Global data
Current data in the Voice mode
Current data in the Song or
Pattern mode
• Mixing data
• Multi Common data
Part Voice data
(16 Voices)
Mixing Voice data
(16 Voices)
Store Voice
*2
(page 46)
Store Voice
*2
(page 46)
User Voice data
• Normal User 1 (128 Voices)
• Normal User 2 (128 Voices)
• Normal User 3 (128 Voices)
• Drum User (32 Voices)
Editor file
(Extension: .X6E)
Data sync
*1
Data sync
*1
Data sync
*1
Current Global data
Current data in the Voice mode
Current data in the Song or
Pattern mode
• Mixing data
• Multi Common data
Global data
User Voice data
• Normal User 1 (128 Voices)
• Normal User 2 (128 Voices)
• Normal User 3 (128 Voices)
• Drum User (32 Voices)
Part Voice data
(16 Voices)
Mixing data
• Multi Common data
Mixing Voice data
(16 Voices)
Store Voice
*2
(page 46)
Store Voice
*2
(page 46)
Store Voice
*2
(page 46)
Store Mixing
*3
(page 47)
Store Global
*3
(page 46)
MOXF6/MOXF8 instrument
Store Voice
*2
(page 46)
Starting the MOXF6/MOXF8 Editor (VST version)
MOXF6/MOXF8 Editor Owner’s Manual
4
Starting the MOXF6/MOXF8 Editor (VST version)
Install the Yamaha Steinberg USB Driver and MOXF6/MOXF8 Editor VST by following the respective
Installation Guides. After making the required connection and setting the MIDI IN/OUT parameter to “USB” in
the Utility mode, follow the instructions below to start the MOXF6/MOXF8 Editor VST.
This example describes the operation steps for Cubase with the MOXF6/MOXF8 instrument connected to a
computer via an USB cable.
n For details about connection between the MOXF6/MOXF8 and a computer, refer to the Owner’s Manual of the MOXF6/
MOXF8.
n On the MOXF6/MOXF8, press the [UTILITY] to enter the Utility mode, then press the [F6] MIDI followed by the [SF4]
OTHER. On this display, set the MIDI In/Out parameter to “USB”, then press the [STORE] button to store this Utility
setting.
1. Open the VST Instrument window via [Devices] [VST Instruments] in the Cubase
series menu.
2. Click the Instrument Slot in the VST Instrument Rack, then select [External] [MOXF6/
MOXF8 VST].
3. When the dialog box asking “Do you want to create a MIDI track assigned to plug-in
“MOXF6/MOXF8 VST”?” appears, click [Create].
A MIDI track will be created and the MOXF6/MOXF8 Editor VST window will appear.
Starting the MOXF6/MOXF8 Editor (VST version)
MOXF6/MOXF8 Editor Owner’s Manual
5
4. Click the Output Setup button at the right side of the Edit button ( ) in the VST
Instrument Rack, then select [Activate All Outputs].
After this operation, the MOXF6/MOXF8 1 – 2 Busses appear in the project window of the Cubase series.
5. Call up the Editor Setup window in the MOXF6/MOXF8 Editor VST via [File] [Editor
Setup].
6. Select “MOXF6/MOXF8” at the [USB Device] column.
7. Click [OK] button at the bottom.
8. Call up the VSTi Setup window in the MOXF6/MOXF8 Editor VST via [File] [VSTi Setup].
9. Click the [Auto] button then all the audio ports are assigned automatically.
10. Click the [OK] button at the bottom.
11. If the MOXF6/MOXF8 Editor VST is “OFFLINE,” click the [ONLINE/OFFLINE] button to
go “ONLINE.
12. In Quick Setup, select the desired one.
n Step 5 through 10 are required when starting MOXF6/MOXF8 Editor VST for the first time. These steps are
saved in the editor and do not need to be repeated each time it is started.
n The MOXF6/MOXF8 Editor can be started also from Media Bay via the following steps. From the “Media”
menu of Cubase series, select “MediaBay” to call up the MediaBay window. Select a Voice from the
MediaBay, right-click to call up “Property,” then select “Create Track.” Press the “Edit Instrument” button on
the created Instrument track to start the MOXF6/MOXF8 Editor VST.
Output Setup button
Starting the MOXF6/MOXF8 Editor (VST version)
MOXF6/MOXF8 Editor Owner’s Manual
6
Adjusting the hue of the display
The MOXF6/MOXF8 Editor lets you adjust the hue as desired.
1. At the left bottom of the Editor window, click the triangle button to call up the slider.
Click the triangle button again to close the slider.
2. Drag or click the slider to adjust the hue.
In Windows, to reset the hue to its default, simultaneously hold down the <Ctrl> key and click on the
slider.
On the Mac, to reset the hue to its default, simultaneously hold down the <Command> key and click
on the slider.
For details about slider operation, refer to page 34.
An Example of MOXF6/MOXF8 Editor in Use: Editing in the Voice mode
MOXF6/MOXF8 Editor Owner’s Manual
7
An Example of MOXF6/MOXF8 Editor in Use
There is no single way to use the many components in the MOXF6/MOXF8 Editor. Your editing needs and
preferences may differ; however, the following example gives you a simple step-by-step guide in how to use
the MOXF6/MOXF8 Editor. As an example, this section explains how to edit a Voice in the Voice mode, edit a
Mixing program in the Song mode, then store the edited data to the memory of the MOXF6/MOXF8
instrument and save the final results of your editing to a file.
Editing in the Voice mode
n If the [Song] or [Pattern] indication (at the top left of the display) is on, perform the instructions below from step 1. If the
[Voice] indication is on, perform the instructions below from step 2.
1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left of
the display).
If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync
window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you
should proceed to step 3.
2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE]
indication is set to [OFFLINE].
3. On the Auto Sync window, set communication-related parameters such as Input Port,
Output Port and Device Number in the Data Port section, then set the direction of Data
Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section.
When you want to use the settings on the MOXF6/MOXF8 itself as starting data for editing, set the boxes
of Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to
the computer. To use the settings on the MOXF6/MOXF8 Editor as starting data, set both Global, Current
and Voice to the opposite, so that the arrow indicates data flow from the computer to the keyboard. For
details, see page 37.
NOTICE
Keep in mind that when you set Global, Current and Voice to On, enable data sync from the computer to the
MOXF6/MOXF8 (instrument), and then click the [Start] button at the bottom, this operation transmits these types of
data currently on the Editor to the MOXF6/MOXF8 itself, automatically overwriting and erasing all the
corresponding data already existing on memory of the MOXF6/MOXF8 instrument. When you want to use the
settings on the MOXF6/MOXF8 itself as starting data for editing, set the boxes of Global, Current and Voice in the
Auto Sync Setting to on so that the data flows from the instrument to the computer.
Make sure to set the desired data transfer direction in order to avoid data loss.
Any data which was overwritten and lost accidentally cannot be recovered.
An Example of MOXF6/MOXF8 Editor in Use: Editing in the Voice mode
MOXF6/MOXF8 Editor Owner’s Manual
8
4. From the Auto Sync window, click [Start] at the bottom.
The data synchronization will be started if the Port settings are correct. As soon as data synchronization
is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE
indication automatically. In this ONLINE status, editing a parameter on the MOXF6/MOXF8 Editor affects
the same parameter on the MOXF6/MOXF8 itself, and vice versa.
For more information, refer to “ONLINE/OFFLINE” on page 13.
5. Edit the Voice in the Voice mode.
5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the
VOICE LIBRARY window.
5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to
the current Part.
You can confirm the sound of the selected Voice by clicking any note on the virtual keyboard or the
MOXF6/MOXF8 keyboard.
5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY
window.
You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of
the window. By executing this operation, the Voice selection is reset to the original status and the VOICE
LIBRARY window closes.
NOTICE
When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store
the edits, make sure to store the Voice by using the Store window (page 46) before changing the Voice.
An Example of MOXF6/MOXF8 Editor in Use: Editing in the Voice mode
MOXF6/MOXF8 Editor Owner’s Manual
9
5-4 Edit the Voice parameters as desired.
Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them.
To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the
MOXF6/MOXF8 keyboard.
To make detailed settings of the selected Voice, click the arrow button at the top of the right panel
next to the main window to call up the Detailed Parameter section.
n For details about Voice parameters, refer to “Editing a Normal Voice” and “Editing a Drum Voice” in the
Reference Manual.
6. Store the edited settings as a User Voice, as necessary.
6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 46).
6-2 Select a Voice Bank from the following list:
• Normal User 1
• Normal User 2
• Normal User 3
• Drum User
n Normal User 1 – 3 are shown in the Store window when editing the Normal Voice while Drum User is shown in
the Store window when editing the Drum Voice.
6-3 Open the selected Bank, select the desired number as destination, then enter the name
of the Voice in the box at the top of this window.
An Example of MOXF6/MOXF8 Editor in Use: Mixing edit in the Song or Pattern mode
MOXF6/MOXF8 Editor Owner’s Manual
10
6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.
Performing this operation will store the Voice data to the User Voice Bank in the MOXF6/MOXF8
instrument as well as that within the Editor.
NOTICE
When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument)
will be overwritten. Select the destination Voice number carefully to prevent important data from being erased
accidentally. For this reason, important data should always be saved to a separate USB storage device.
n You can store the settings of the parameters in the “G” row except for the Chorus and Reverb settings by
clicking [Store Global] under [Edit] in the menu bar.
Mixing edit in the Song or Pattern mode
This section explains how to edit a Mixing program in the Song mode.
1. Change the mode to the Song mode by clicking [Song] of the [Voice]/[Song]/[Pattern]
indication.
The Auto Sync appears automatically during ONLINE status.
2. From the Auto Sync window, click [Start] at the bottom.
Data synchronization will be started if the Port settings are correct. As soon as data synchronization is
completed, the Auto Sync window is closed.
3. Edit the parameters of the Mixing and Voice assigned to each Part.
If you want to change the parameter values from the original ones of the selected Song or Pattern, click
(drag and drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/
Multi section and “1” – “16” in the Part section.
An Example of MOXF6/MOXF8 Editor in Use: Mixing edit in the Song or Pattern mode
MOXF6/MOXF8 Editor Owner’s Manual
11
To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard.
To make detailed settings of the selected Multi, click the arrow button at the top of the right panel
next to the main window to call up the Detailed Parameter section.
n The MOXF6/MOXF8 Editor lets you edit the Voice parameters in the Song or Pattern mode as well as Voice
mode. In the Voice mode, you can edit only the selected Voice. In the Song or Pattern mode, on the other
hand, you can edit the parameters of the Voice assigned to each Part as well as the Mixing parameters. The
edited Voice can be stored to the same Voice Bank as a User Voice regardless of the mode used for editing.
4. Store the edited Voice or a Mixing, as necessary.
4-1 Select the [Mixing Store] under [Edit] in the menu bar then store the edited Mixing.
4-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in
the menu bar to call up the Store window (page 46) then store the Voice via the same
operations as in steps 6-1, 6-2, 6-3 and 6-4.
5. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a file
(extension: *.X6E).
All the settings you made and the Voice data you stored to the User Banks will be saved as a single file
(extension: .X6E). When you open this file next time to call up the Auto Sync window, click [Start] to
synchronize the status of the parameter settings between the MOXF6/MOXF8 Editor and the MOXF6/
MOXF8 instrument.
The Save operation from the Cubase series File menu will save the Project file including the settings
made via the MOXF6/MOXF8 Voice Editor VST. This means that opening the same Project file next time
will call up the settings lastly made via the MOXF6/MOXF8 Voice Editor VST.
An Example of MOXF6/MOXF8 Editor in Use: Mixing edit in the Song or Pattern mode
MOXF6/MOXF8 Editor Owner’s Manual
12
NOTICE
It is recommended that Auto Save be set to off in the Preferences - General window of Cubase series. If Auto Save is
set to on, a backup of the Cubase series Project file will be created automatically, resulting in the Indicators showing
the Editing Status being turned off, even though the Voice Edit settings have not been saved yet. This allows you to
open a new file or different file, resulting in the settings being lost. In other words, to best avoid losing your editing
data, set Auto Save to off.
MOXF6/MOXF8 Editor Window: Overall section
MOXF6/MOXF8 Editor Owner’s Manual
13
MOXF6/MOXF8 Editor Window
Overall section
VST Preset (only for VST version)
This box lets you store the settings made on the MOXF6/MOXF8 Editor VST as VST Preset or recall it.
Click the icon ( ) at right of this box, select “Save Preset,” enter the desired name of the new VST
Preset on the “Save Preset” window then store the settings. The currently edited Voice will be stored in
the Voice mode while the edited Mixing setup will to be stored in the Song or Pattern mode.
The stored settings can be recalled by clicking the icon ( ) at right of this box, selecting “Load Preset”
then selecting the VST Preset. The name of the selected VST Preset will be shown in this box. No name
is shown in this box if no Preset VST is recalled.
n The data of the MOXF6/MOXF8 stored as VST Preset can be handled like the other VST Presets in the Media
Bay of Cubase series.
NOTICE
Note that recalling the VST Preset will overwrite or erase the current settings of the MOXF6/MOXF8 Editor VST.
File, Edit, Bulk, Help
Refer to page 35.
Voice/Song/Pattern mode
Determines the mode of the MOXF6/MOXF8, Voice, Song or Pattern. As soon as “Voice,” “Song” or
“Pattern” is selected here, the mode of the MOXF6/MOXF8 instrument changes accordingly and the
Auto Sync window (page 50) opens. After setting parameters as necessary on this window, click [Start]
to execute data synchronization between the MOXF6/MOXF8 Editor and the MOXF6/MOXF8 instrument.
ONLINE/OFFLINE
Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is
indicated, the edited status is completely synchronized between the MOXF6/MOXF8 Editor and the
MOXF6/MOXF8 instrument, meaning that any parameter edit you make on the MOXF6/MOXF8 Editor is
reflected in the same parameter on the MOXF6/MOXF8 instrument and vice versa. When OFFLINE is
selected, editing on the MOXF6/MOXF8 Editor will not affect the MOXF6/MOXF8 instrument and vice
versa even if the MOXF6/MOXF8 instrument is connected to a computer.
Note that the indication here is automatically changed according to the status of communication
between the MOXF6/MOXF8 Editor and the MOXF6/MOXF8 instrument. For example, the ONLINE status
changes automatically to OFFLINE when the cable is disconnected accidentally.
Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE ( ) described below.
Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the
MOXF6/MOXF8 instrument is not properly connected to a computer.
This OFFLINE indication shows that the MIDI Port is set properly and the MOXF6/MOXF8 is properly
connected to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you
can synchronize the settings between the MOXF6/MOXF8 Editor and the MOXF6/MOXF8 by clicking the
[Start] button. As soon as data synchronization is completed, the Auto Sync window is closed and the
status of the Editor changes from OFFLINE to ONLINE.
MOXF6/MOXF8 Editor Window: Overall section
MOXF6/MOXF8 Editor Owner’s Manual
14
n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync
window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync
window.
This OFFLINE indication shows that the MIDI Port is not set properly or the MOXF6/MOXF8 instrument is
not connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to
connect the MOXF6/MOXF8 instrument to a computer, set the MIDI Port properly then click the [Start]
button in the Auto Sync window to execute data synchronization between the MOXF6/MOXF8 Editor and
the MOXF6/MOXF8. As soon as data synchronization is completed, the Auto Sync window is closed and
the status of the Editor is changed from OFFLINE to ONLINE.
MOXF6/MOXF8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)
MOXF6/MOXF8 Editor Owner’s Manual
15
When the Voice/Song/Pattern is set to “Voice”
Mixer section
Global
This strip lets you edit the main parameters in the Voice mode, such as effect-related ones.
n When editing any of the Global parameters described below, a small square appears at the top right of the
“G” box until you save the edited data as a file. This indication is the same as the [F] indicator (page 22).
Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)
Edits the Master EQ parameters.
Chorus
Selects the Chorus type.
Reverb
Selects the Reverb type.
Master Effect
Turns the Master Effect on or off and selects the Master Effect type.
Volume
Adjust the entire volume.
[Voice]/[AD Part] tab
Selects the Parts to be edited from [Voice] and [AD Part]. The illustration below indicates that the [Voice]
tab is active.
Before editing
After editing
MOXF6/MOXF8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)
MOXF6/MOXF8 Editor Owner’s Manual
16
Voice
When the [Voice] is selected:
Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below.
n When editing any of the Voice parameters described below, a small square appears at the top right of the “V”
box until you save the edited data as a file or you store the edited data as a Voice. This indication is the same
as the [V] indicator (page 29).
n The MIDI monitor mark is at the left side of the “V” mark. A small LED lights when the specific MIDI channel
receives MIDI messages.
Category, Bank, No., Voice Name
Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window
appears at the right half section, letting you select a different Voice for editing.
VOICE LIBRARY
Close button
Click this to close this window without applying the changes to the MOXF6/MOXF8 Editor.
[Category]/[Bank] checkboxes
Click either of these boxes to determine whether the Voices listed here are divided into Category
folders or Bank folders.
Before editing
After editing
MOXF6/MOXF8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)
MOXF6/MOXF8 Editor Owner’s Manual
17
[+]/[–] buttons
Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to
close all folders.
Folder (Category or Bank)
Click each folder to open or close it.
Voices
Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When
double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the
Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by
dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-and-
dropping the Voice(s) to a new location.
If you enter checkmarks to the checkboxes of your most-used or favorite Voice, you can call up a list of
these Voices on the VOICE LIBRARY by setting the [Favorites] checkbox to on.
n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as
normal on your computer OS.
n By right-clicking on Windows / <control> key + clicking on Mac this section and selecting a menu,
you can use the following functions.
Opening/closing all the folders
Determining whether the Voices listed here are divided into Category folders or Bank folders.
Copying/pasting
Changing the Voice name
Deleting all the checkmarks of the Favorites checkboxes at left of the Voices
Saving the VST presets
n There are two ways to save a VST preset.
Right-click (Windows) / <control> key + click (Mac) on the Voice Library > Save VST presets
Click the “Save a VST preset” button on the Cubase series
“Save VST presets” on the right click menu allows you to save a voice of the User Bank separately.
You need to save the voice of the Preset Bank to the User Bank when you want to save the Voice of
the Preset Bank as a VST preset.
The “Save a VST preset” button on the Cubase series will save all settings of the MOXF6/MOXF8
Editor as a VST preset.
Search Box
You can search for your desired Voice by inputting a keyword here.
[Favorites] checkbox
By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE
LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the
appropriate checkboxes at the left of each Voice.
[OK]/[Cancel] buttons
Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit
without applying the Voice selection.
Refresh
When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the MOXF6/MOXF8
itself, the name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the
MOXF6/MOXF8. If this happens, click this button to update the Voice names of the VOICE LIBRARY.
MOXF6/MOXF8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)
MOXF6/MOXF8 Editor Owner’s Manual
18
EQ Lo, Mi, Hi (Part EQ)
Adjusts the equalizer settings for the current Voice.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using
the graphic knobs.
Volume
Adjusts the volume of the current Voice.
ARP (Arpeggio)
Turns Arpeggio playback on or off for the current Voice.
When the [AD Part] is selected:
This section lets you edit parameters for the AD Part in the Voice mode.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD Part in the Voice
mode by using the graphic knobs.
n The Chorus Send and Reverb Send for the AD Part affect only when the USB I/O Mode parameter in the
Utility mode is set to “1 StereoRec.”
Volume
Adjusts the Volume for the AD Part.
MOXF6/MOXF8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Parameter Category section)
MOXF6/MOXF8 Editor Owner’s Manual
19
Parameter Category section
You can edit detailed parameters for the current Part by clicking the button (located near the top right of
the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed
Parameter section moves the Parameter Category Section rightward as shown below.
Parameter Category section
Parameter Category section Detailed Parameter section
MOXF6/MOXF8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Parameter Category section)
MOXF6/MOXF8 Editor Owner’s Manual
20
The indicated categories in the Parameter Category section differs depending on the selected row: G, V, or
AD Part, as illustrated below. Clicking each of Categories calls up the corresponding parameters in the
Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “V”
indication shown below appears by clicking the “V” row appearing only when the [Voice] tab is selected at
the bottom of the Mixer section. The “AD” indication shown below appears by clicking the “AD” row
appearing only when the [AD Part] tab is selected at the bottom of the Mixer section.
Open/Close button
This button opens/closes the Detailed Parameter section. When only the left arrow is indicated in white,
the Detailed Parameter section is hidden and you can call it up by clicking here. When only the right
arrow is indicated in white, the Detailed Parameter section is shown on the display, allowing you to edit
the displayed parameters. The Detailed Parameter section can be closed by clicking this button. You
can also conveniently open and close the Detailed Parameter window from your computer keyboard.
Hold down the <Ctrl> key (Command key for Mac) and simultaneously press the left arrow () key to
open the window, or hold <Ctrl> key (Command key for Mac) and press the right arrow () key to close
it.
Global Settings
This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Global parameters in the Detailed Parameter section.
Voice Common
This is shown when the “V” row is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Voice Common parameters in the Detailed Parameter section.
“G” “V” AD”
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57

Yamaha MOXF6 Manualul proprietarului

Categorie
Software
Tip
Manualul proprietarului
Acest manual este potrivit și pentru