Yamaha MG06 Manualul proprietarului

MG06
Yamaha
Marca
Yamaha
Model
MG06
Categorie
Amplificator de instrumente muzicale
Tip
Manualul proprietarului

Acest manual este potrivit și pentru

Welcome
Thank you for purchasing the Yamaha MG06X/MG06 Mixing Console.
Please read this manual thoroughly to get the most out of the product and ensure long-term,
trouble-free use. After reading this manual, keep it readily available for future reference.
* For the remainder of this manual, the word “mixer” is used instead of “Mixing Console.”
** In this manual, all panel illustrations show the MG06X panel.
Main Features
•
6-channel mixer features microphone inputs and stereo/mono line inputs for input jacks.
•
Yamaha’s premium head amp “D-PRE” for providing high quality sound.
•
PAD switch to support a wide variety of inputs to the channels 1/L and 2/R.
•
(MG06X) Yamaha’s high-quality SPX effects (6 types), providing optimum processing for
instruments or vocals.
Included Accessories
•
AC power adaptor
•
Technical Specifications: Includes block diagram, dimensions, general specifications, and
input/output characteristics.
•
Owner’s Manual (this leaflet)
Quick Start Guide
STEP 1
Connecting speakers, microphones, and
instruments, etc.
Connection Example
Microphones
Electric acoustic guitar
Electric keyboard
Powered speakers
Headphones
Portable
audio
player
L* RRL R* L
RRL L
* Stereo mini plugs require conversion plugs to phone plugs.
STEP 2
Getting Sound to the Speakers
1
Make sure that all switches including the [ ] switch are not pressed (N).
2
Connect the supplied AC power adaptor.
First connect the adaptor to the DC IN [12V] jack at the back panel of the unit (
1
),
and then to the outlet (
2
).
Power adaptor
To electrical outlet
3
Turn the [GAIN], [LEVEL] knobs (white), and [STEREO LEVEL] knob (red)
fully to the left (minimum). Set the equalizer knobs (green) to the center “6”
position.
Refer to the illustration (at the top of the next column, before step 4).
ä
Equalizer
LEVEL
GAIN
STEREO LEVEL
4
If you connect a device with high output level, such as a CD player or an
electric keyboard to the channels 1/L and 2/R, turn on (O) the [PAD] switch
of the corresponding channel*.
* Channel: Location or path where sound is input.
Channel 1/L
Channel number
Channel 2/R
PAD
NOTE If you are using condenser microphones, turn on (O ) the [PHANTOM +48V] switch.
5
Turn on the power to connected devices in the following order:
(microphone), (instrument), (audio device)
[ ] (switch on unit) (speakers)
NOTICE
Follow this order to avoid any loud, unexpected noise from the speakers. Reverse the order when
turning the power off.
6
Set the [STEREO LEVEL] knob to the “3” position.
7
For channels to which a microphone is connected, set the [GAIN] knob to
roughly the 12 o’clock position.
8
While playing your instrument or speaking into the microphone, turn the
[LEVEL] knob to adjust the volume of the corresponding channel.
9
If necessary, adjust the volume of the speaker or power amp.
If you hear the sound and the volume seems appropriate, setup is complete. If not,
please go to step 10 below.
NOTICE
To avoid any loud noise from the speaker, first turn off the power of the speaker (speaker amp), then
the unit itself, and finally the connected sound source such as an instrument.
10
If the sound is not heard, or if you want to adjust the volume, follow the
instructions in the boxed section below.
If you still do not hear the sound after doing the following steps, please refer to the
checklist in the “Troubleshooting” section at the back of this booklet.
EN
ZT44280
MIXING CONSOLE
Owner’s Manual
< There is no sound, or you need to increase the volume
1
Turn the [GAIN] knob to the right so that the corre-
sponding [PEAK] LED flashes briefly.
NOTE If the [PEAK] LED does not light even if the [GAIN] knob has been
turned fully to the right, raise the volume of the sound source
(instrument, etc.).
If no sound is heard or the volume does not increase after step 1:
2
If the [PAD] switch is turned on (O), set the [LEVEL]
knob to “0” (minimum), and then turn off (N) the
switch.
3
Slowly turn the [LEVEL] knob to the right until the
desired volume is reached.
< To decrease the volume:
1
Set the [LEVEL] knob to “0” (minimum), then turn on
(O) the [PAD] switch.
2
Slowly turn the [LEVEL] knob to the right until the
desired volume is reached.
If the volume does not decrease after the above steps:
3
Lower the volume of the instrument or audio device.
PAD
GAIN
LEVEL
PEAK
Controls and Functions
2 [MIC/LINE] mono input jacks (channels 1/L, 2/R)
Connect a microphone, an instrument, or an audio device (CD
player, etc.) to the unit. These jacks support both XLR and
phone plugs.
XLR Phone
3 [LINE] stereo input jacks (channels 3/4, 5/6)
Connect line-level devices such as an electric keyboard or
an audio device. These jacks support phone plugs. If you use
only the [L/MONO] jack, same sound is output from both L (left)
and R (right) speakers.
4[PAD] switches
Turning the switch on (O) will attenuate the sound input to the
unit. If you hear distortion or the [PEAK] LED @ lights, turn the
switch on (O).
NOTE Turn the [LEVEL] knob to "0" (minimum) before toggling
the [PAD] switch on (O ) and off (N ). Otherwise, noise
may be produced.
5 [HPF] (High-Pass Filter) switches
Turning the switch on (O) will apply a high-pass filter that
attenuates frequencies below 80Hz. When speaking into the
microphone, you may want to turn this switch on (O), in order
to reduce unwanted vibration and wind sound received by the
microphone.
@ [PEAK] LED
Lights when the volume of input and/or post-equalizer sound
is too high. If it is lit, turn the [GAIN] knob 8 to the left to lower
the volume.
# [LEVEL] knobs
For adjusting the volume balance among the channels.
$ [PHONES LEVEL] knob
Adjusts the headphones volume.
% [STEREO LEVEL] knob
Adjusts the overall volume output from the [STEREO OUT]
output jacks.
1 (Back panel) DC IN [12V] jack
Connect the supplied AC power adaptor to this jack.
6 [STEREO OUT] output jacks
Connect a powered speaker or powered amp. These jacks
support both XLR and phone plugs.
7 [PHONES] output jack
Connect a set of headphones. This jack supports a stereo
phone plug.
^ [PHANTOM +48V] switch/LED
When this switch is on (O), the LED lights indicating that the
unit supplies DC+48V phantom power to the XLR plugs of
the [MIC/LINE] mono input jacks 2. Turn this switch on when
using a phantom-powered condenser microphone.
CAUTION
Be sure to leave this switch off (N) if you do not need phantom power.
Follow the important precautions below, in order to prevent noise and
possible damage to external devices as well as the unit when you
operate this switch.
•
Be sure to leave this switch off when you connect a device that does
not support phantom power to channels 1/L or 2/R.
•
Do not connect/disconnect a cable to/from channels 1/L and 2/R
while this switch is on.
•
Turn the [LEVEL] knob of the channels 1/L and 2/R to the minimum
before operating this switch.
& [ ] (On/Standby) switch
Toggles to turn the unit’s power On (O) or Standby (N).
CAUTION
•
Rapidly switching the unit between on and standby in succession
can cause it to malfunction. After setting the unit to standby, wait for
about 5 seconds before turning it on again.
•
Even when the switch is in the standby (N) position, electricity is still
flowing to the unit. If you do not plan to use the unit for a while, be
sure to unplug the AC power adaptor from the outlet.
* [REVERBN /O DELAY] switch (MG06X)
Toggles to select the effect applied to channels 1/L and 2/R
between Reverb (N) and Delay (O).
( Effect select slide switch (MG06X)
Moves up and down to select the effect type. The LED of the
selected effect lights.
A [FX RTN LEVEL] (effect return level) knob
(MG06X)
Adjusts the volume of the effect sound.
B Level meter
The L and R meters show the level of the signal output from
the [STEREO OUT] jack. If the [PEAK] lamp lights in red, use
the [LEVEL] knob to lower the volume.
8 [GAIN] knobs
Determines the basic volume for each channel, 1/L and 2/R.
Adjust these so that the corresponding [PEAK] LEDs @ flash
briefly when singing or playing the loudest.
9 Equalizer (EQ) knobs
Adjust the sound quality by using the [HIGH] (high frequency
band) and [LOW] (low frequency band) knobs. If you do not
need to adjust the sound quality, set the knob to the “6” (flat)
position.
) [FX] switches (MG06X)
Toggle the FX (effect) of channels 1/L and/or 2/R on and off.
! [N MONO/O STEREO] switch
(N) [MONO]: Sound input to channels 1/L or 2/R can be
heard from both the right and left speakers. If you use the 1/L
or 2/R individually, set the switch to this setting.
(O ) [STEREO]: Sound input to channel 1/L can be heard from
only the left speaker, and that input to channel 2/R can be
heard from only the right speaker.
Applying Effects (MG06X)
The MG06X features built-in effects (Reverb and Delay) processors that are in the same
league as our famed SPX effect processor series. Those effects let you simulate the
acoustics of different performance environments, such as concert halls and small clubs,
and add warm, natural ambience to your vocals or instrument performance.
1
Use the [REVERBN /O DELAY] switch to select Reverb (N) or Delay (O ).
Type Description
REVERB HALL Reverb simulating a large space such as a concert hall.
ROOM Reverb simulating the acoustics of a small space (room).
PLATE Reverb simulating a metal-plate, producing a more hard-edged sound.
DELAY SHORT Short echo with a “doubled” sound.
LONG Long, resonant echo with an extended decay.
VO.ECHO Echo suitable for vocals.
2
Move the effect select slide switch up and down to select the effect type.
The LED of the selected effect lights.
3
Turn on (O) the [FX] switch of the channel (1/L or 2/R) to which you want to
apply the effect.
4
Turn the [FX RTN LEVEL] knob to adjust the effect amount.
3
4
2
1
Mixer Basics:
Where Your Sound Goes
The right illustration diagram illustrates the sound
flow from summing (mixing) sound which was
input to the channels to outputting sound from
the speakers or headphones. Let’s find out where
input sound goes once it’s inside the mixer.
1 Input the sound from a microphone or
instrument
5 Output the sound from speakers or
headphones
4 Final adjustment of the volume of the
mixed sound
3
The signal ow of the sound rightward, from
the channels to the nal output.
2 Adjust the sound quality and volume of each
channel
Equalizer (HIGH, LOW) knobs
GAIN, LEVEL Knobs
1
PRECAUTIONS
PLEASE READ CAREFULLY
BEFORE PROCEEDING
Please keep this manual in a safe place for future refer-
ence.
WARNING
Always follow the basic precautions listed below to
avoid the possibility of serious injury or even death
from electrical shock, short-circuiting, damages, re or
other hazards. These precautions include, but are not
limited to, the following:
Power supply/AC power adaptor
• Do not place the power cord near heat sources such
as heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it,
or place it in a position where anyone could walk on, trip
over, or roll anything over it.
• Only use the voltage specied as correct for the device.
The required voltage is printed on the name plate of the
device.
• Use the specied adaptor (MU18 or PA-130, or an
equivalent recommended by Yamaha) only. Using the
wrong adaptor can result in damage to the instrument or
overheating.
• If you intend to use the device in an area other than in the
one you purchased, the included power adaptor may not
be compatible. Please check with your Yamaha dealer.
• Check the electric plug periodically and remove any dirt
or dust which may have accumulated on it.
Do not open
• This device contains no user-serviceable parts. Do not
open the device or attempt to disassemble the internal
parts or modify them in any way. If it should appear to be
malfunctioning, discontinue use immediately and have it
inspected by qualied Yamaha service personnel.
Water warning
• Do not expose the device to rain, use it near water or in
damp or wet conditions, or place on it any containers (such
as vases, bottles or glasses) containing liquids which
might spill into any openings. If any liquid such as water
seeps into the device, turn off the power immediately and
unplug the power cord from the AC outlet. Then have the
device inspected by qualied Yamaha service personnel.
• Never insert or remove an electric plug with wet hands.
Fire warning
• Do not put burning items, such as candles, on the unit. A
burning item may fall over and cause a re.
If you notice any abnormality
• When one of the following problems occur, immediately
turn the power off and disconnect the electric plug from
the outlet. Then have the device inspected by Yamaha
service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the device.
• If this device or the AC power adaptor should be dropped
or damaged, immediately turn the power off, disconnect
the electric plug from the outlet, and have the device
inspected by qualied Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to
avoid the possibility of physical injury to you or others,
or damage to the device or other property. These pre-
cautions include, but are not limited to, the following:
Power supply/AC power adaptor
• Do not cover or wrap the AC power adaptor with a cloth or
blanket.
• When removing the electric plug from the device or an
outlet, always hold the plug itself and not the cord. Pulling
by the cord can damage it.
• Remove the electric plug from the outlet when the device
is not to be used for extended periods of time, or during
electrical storms.
Location
• Do not place the device in an unstable position where it
might accidentally fall over.
• Do not place the device in a location where it may come
into contact with corrosive gases or salt air. Doing so may
result in malfunction.
• Before moving the device, remove all connected cables.
• When setting up the device, make sure that the AC outlet
you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn the power off and
disconnect the plug from the outlet. Even when the power
is turned off, electricity is still owing to the product at the
minimum level. When you are not using the product for a
long time, make sure to unplug the power cord from the
wall AC outlet.
Connections
• Before connecting the device to other devices, turn off the
power for all devices. Before turning the power on or off
for all devices, set all volume levels to minimum.
Maintenance
• Remove the power plug from the AC outlet when cleaning
the device.
Handling caution
• Avoid inserting or dropping foreign objects (paper, plastic,
metal, etc.) into any gaps or openings on the device. If
this happens, turn off the power immediately and unplug
the power cord from the AC outlet. Then have the device
inspected by qualied Yamaha service personnel.
• Do not rest your weight on the device or place heavy ob-
jects on it, and avoid use excessive force on the buttons,
switches or connectors.
• Do not use speakers or headphones for a long period of
time at a high or uncomfortable volume level, since this
can cause permanent hearing loss. If you experience any
hearing loss or ringing in the ears, consult a physician.
Yamaha cannot be held responsible for damage caused
by improper use or modifications to the device, or data
that is lost or destroyed.
Always turn the power off when the device is not in use.
Even when the [
](Standby/On) switch is in standby status,
electricity is still flowing to the instrument at the minimum
level. When you are not using the instrument for a long time,
make sure you unplug the power cord from the wall AC
outlet.
European Models
Inrush Current based on EN 55103-1:2009
1 A (on initial switch-on)
1 A (after a supply interruption of 5s)
Conforms to Environments: E1, E2, E3 and E4
(PA-en_1)
General Specifications
0 dBu = 0.775 Vrms Output impedance of signal generator (Rs) = 150 Ω
All level knobs are nominal if not specified.
Frequency Response Input to STEREO OUT
+0.5 dB/-0.5 dB (20 Hz to 20 kHz),
refer to the nominal output level @ 1 kHz, GAIN knob: Min
Total Harmonic Distortion
(THD+N)
Input to STEREO OUT
0.01 % @ +8 dBu (20 Hz to 20 kHz), GAIN knob: Min
0.003 % @ +18 dBu (1 kHz), GAIN knob: Min
Hum&Noise *1
(20 Hz to 20 kHz)
Equivalent Input Noise -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
Residual Output Noise -102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
Crosstalk (1 kHz) *2 -88 dB
Input Channels 6 channels: Mono (MIC/LINE): 2, Stereo (LINE): 2
Ouput Channels STEREO OUT: 2, PHONES: 1
Bus STEREO: 1
Mono Input Channel Function
PAD 26 dB
HPF 80 Hz, 12 dB/oct
EQ HIGH Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ LOW Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED
LED turns on when post EQ signal reaches 3 dB below clipping
(+11 dBu)
Level Meter Post STEREO LEVEL Knob 2 x 7-segment LED meter [PEAK (+11), +6, +3, 0, -3, -10, -20 dB]
Internal Digital Effect (MG06X) SPX Algorithm 6 programs
Phantom Power Voltage +48 V
Power Supply Adaptor
PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz, or
MU18 (DC12 V/1.5 A, Cable length = 1.5 m), 100 V-240 V, 50 Hz/60 Hz,
or an equivalent recommended by Yamaha
Power Consumption 12 W
Dimensions (W×H×D) 149 mm×62 mm×202 mm (5.9"x 2.4"x 7.9")
Net Weight MG06: 0.9 kg (2.0 lbs), MG06X: 0.9 kg (2.0 lbs)
Optional Accessory Mic Stand Adaptor: BMS-10A
Operating Temperature 0 to +40°C
* 1 Noise is measured with A-weighting filter. *2 Crosstalk is measured with 1 kHz band pass filter.
* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website
then download the manual file.
Jack List (Pin Alignment)
Input and Output Jacks Polarities Balanced/Unbalanced Congurations
MIC/LINE 1/L, 2/R
STEREO OUT L, R
Pin 1: Ground
Pin 2: Hot (+)
Pin 3: Cold (-)
Balanced
OUTPUTINPUT
XLR connector
MIC/LINE 1/L, 2/R*
STEREO OUT L, R*
Tip: Hot (+)
Ring: Cold (-)
Sleeve: Ground
Balanced
Ring
TipSleeve
TRS phone plug
PHONES
Tip: L
Ring: R
Sleeve: Ground
—
LINE 3/4, 5/6
Tip: Signal
Sleeve: Ground
Unbalanced
TipSleeve
TS phone plug
* These jacks also accept connection to TS phone plugs. If you use TS phone plugs, the connection will be unbalanced.
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the
notices below.
■■
Handling and Maintenance
■y
Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise,
the device, TV, or radio may generate noise.
■y
Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater,
or in a car during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the
internal components.
■y
Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel.
■y
When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
■y
Condensation can occur in the device due to rapid, drastic changes in ambient temperature—when the device is moved
from one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is
present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for sev-
eral hours without turning on the power until the condensation has completely dried out.
■y
To avoid generating unwanted noise, make sure there is adequate distance between the AC power adaptor and the de-
vice.
■y
Avoid setting all equalizer and level knobs to their maximum. Depending on the condition of the connected devices, doing
so may cause feedback and may damage the speakers.
■y
When turning on the AC power in your audio system, always turn on the power amplifier LAST, to avoid speaker damage.
When turning the power off, the power amplifier should be turned off FIRST for the same reason.
■y
Always turn the power off when the device is not in use.
■■
Connectors
XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
Information
■■
About this manual
■y
The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from
those on your device.
■y
The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
Manual Development Department
© 2013 Yamaha Corporation
Published 03/2016 MWLE*.*- **C0
Printed in Malaysia
The model number, serial number, power requirements, etc., may be found on
or near the name plate, which is at the bottom of the unit. You should note this
serial number in the space provided below and retain this manual as a perma-
nent record of your purchase to aid identification in the event of theft.
Serial No.
Model No.
(bottom_en_01)
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used
electrical and electronic products should not be mixed with general household waste. For proper
treatment, recovery and recycling of old products, please take them to applicable collection points,
in accordance with your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any
potential negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local
municipality, your waste disposal service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier
for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct method of disposal.
(weee_eu_en_01)
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying
the terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the three pin plug.
(2 wires)
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT:
When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE:
This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your
use of this product in a residential environment will not result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found
in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with
FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be
the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the
problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of
America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiar-
ies.
* This applies only to the MG06X distributed by YAMAHA CORPORATION OF AMERICA. (class B)
(class b korea)
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så
länge som den ar ansluten till vägguttaget, även om
själva apparaten har stängts av.
ADVARSEL:
Netspændingen til dette apparat er IKKE afbrudt,
sålænge netledningen sidder i en stikkontakt, som er
tændt — også selvom der er slukket på apparatets
afbryder.
VAROITUS:
Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko
laitetta verkosta.
(standby)
Yamaha Pro Audio global website
http://www.yamahaproaudio.com/
Yamaha Downloads
http://download.yamaha.com/
2
Troubleshooting
Power does not come on.
■□
Did you properly plug the power adaptor into an appropriate AC outlet?
■□
Did you rmly and securely connect the power plug?
No sound.
■□
Did you turn on the powered speaker or the power amp?
■□
Did you properly connect the microphones, external devices, and speakers?
■□
Are any connecting cables shorted or damaged?
■□
Did you properly set the [LEVEL] knobs of all relevant channels and the [STEREO LEVEL]
knob to appropriate levels?
■□
Are the [PAD] switches turned on (O)?
Turn the switch off (N). If the volume of sound source is too soft, turning on the switch may
result in no audible sound.
Sound is faint, distorted, or noisy.
■□
Are the [GAIN] knobs and [LEVEL] knobs of all relevant channels, and the [STEREO LEVEL]
knob set too high?
■□
Are the [PEAK] LEDs lit?
Lower the [GAIN] knobs of channels 1/L and 2/R, or turn on (O) the [PAD] switches.
■□
Are the “PEAK” (red) lamps of the level meter lit?
Set the [LEVEL] knobs of all relevant channels and the [STEREO LEVEL] knob to appropriate
levels.
■□
Are the [PAD] switches turned off (N)?
Turn the switches on (O). If the volume of sound source is too loud, turning off the switches
may result in distorted sound.
■□
Is the volume from the connected device too loud?
Lower the volume of the connected device.
The sound of vocals and speech isn’t clear enough.
■□
Turn on (O) the [HPF] switches.
The sound becomes clearer.
■□
Adjust the equalizer knobs (example: lower the [LOW] knobs, raise the [HIGH] knobs).
No effect is applied. (MG06X)
■□
Did you turn on (O) the [FX] switches?
■□
Are the [LEVEL] knobs of all relevant channels raised enough?
■□
Did you set the [FX RTN LEVEL] knob to an appropriate level?
Mounting to a Microphone Stand
Caution
•
If the stand should fall over, the mixer may be damaged. Attach the connection cables carefully so that the cables
will not catch on the equipment and cause it to fall. For example: arrange the cables so that they run parallel with the
microphone pole down to the base of the stand.
Notice
•
When using the mixer on a microphone stand, be sure to set the stand on a level and stable surface. Do not set up
the stand in locations subject to vibrations or wind.
•
Leave ample free space around the stand.
1
Turn the mixer upside-down, and hold the microphone-stand adap-
tor (BMS-10A; sold separately) against the bottom of the mixer so
that the screw holes are aligned (1). Screw the adaptor rmly into
place with the two screws (2).
2
Turn the mixer right-side up, and mount it onto your microphone
stand.
3
Loosen the angle adjustment wingnut (1), adjust the mixer’s angle
as desired (2), and then tighten the wingnut securely (3).
For more information, refer to the BMS-10A Owner’s Manual.
  • Page 1 1
  • Page 2 2

Yamaha MG06 Manualul proprietarului

MG06
Yamaha
Marca
Yamaha
Model
MG06
Categorie
Amplificator de instrumente muzicale
Tip
Manualul proprietarului
Acest manual este potrivit și pentru
Descărcați PDF
raport

în alte limbi

Lucrări conexe