Samsung LE52F96BD Manual de utilizare

Categorie
Televizoare LCD
Tip
Manual de utilizare

Acest manual este potrivit și pentru

LCD TV
LE52F9
LE70F9
Owners Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ Serial No. _______________
BN68-01313D-01
Country
Customer Care Centre
Web Site
AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at
BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be
CZECH REPUBLIC
844 000 844 www.samsung.com/cz
Distributor pro Českou republiku:
Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
DENMARK 70 70 19 70 www.samsung.com/dk
FINLAND 030-6227 515 www.samsung.com/
FRANCE
3260 SAMSUNG (726-7864)
08 25 08 65 65 (€ 0,15/Min)
www.samsung.com/fr
GERMANY 01805-SAMSUNG(726-7864) (€ 0,14/Min) www.samsung.de
HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com/hu
ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it
LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be
NETHERLANDS 0900 SAMSUNG(726-7864)(€ 0,10/Min) www.samsung.com/nl
NORWAY 815-56 480 www.samsung.com/no
POLAND
0 801 801 881
022-607-93-33
www.samsung.com/pl
PORTUGAL 80 8 200 128 www.samsung.com/pt
REPUBLIC OF IRELAND 0818 717 100 www.samsung.com/ie
SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk
SPAIN 902 10 11 30 www.samsung.com/es
SWEDEN 0771-400 200 www.samsung.com/se
SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch
U.K 0870-SAMSUNG (726-7864) www.samsung.com/uk
ESTONIA 800-7267 www.samsung.ee
LATVIA 800-7267 www.samsung.com/lv
LITHUANIA 8-800-77777 www.samsung.lt
KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz
KYRGYZSTAN 00-800-500-55-500
RUSSIA 8-800-555-55-55 www.samsung.ru
TURKEY 444 77 11 www.samsung.com.tr
UKRAINE 8-800-502-0000 www.samsung.ua
UZBEKISTAN 8-800-120-0-400 www.samsung.uz
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Kapcsolatfelvétel: SAMSUNG WORLDWIDE
rmilyen észrevétele, vagy kérse van Samsung terkekkel kapcsolatban, forduljon a SAMSUNG ügylszolgálathoz.
Kontakt do SAMSUNG WORLDWIDE
Jeżeli masz jakieś uwagi lub pytania w sprawie produkw marki Samsung, skontaktuj s z naszą infolin.
Επικοινωνήστε με τη SAMSUNG ΣΕ ΟΛΟ ΤΟΝ ΚΟΣΜΟ
Εάν έχετε σχόλια ή ερωτήσεις σχετικά με προϊόντα της Samsung, επικοινωνήστε με το κέντρο εξυπηρέτησης πελατών της
SAMSUNG.
Свържете се със SAMSUNG ПО ЦЕЛИЯ СВЯТ
Ако имате въпроси или коментари за продуктите на Samsung, се обърнете към центъра за обслужване на клиенти
на SAMSUNG.
Kontaktirajte SAMSUNG ŠIROM SVIJETA
Ako imate pitanja ili komentara u vezi s proizvodima tvrtke Samsung, obratite se centru za brigu o kupcima tvrtke Samsung.
Kontaktujte Samsung po celém svě
Pokud máte dotazy neboipomínky týkající se výrobků Samsung, kontaktujte sedisko péče okazníky spolnosti
SAMSUNG.
Skontaktujte Celosvetový Samsung
Akte neja ozky alebo komenre ohľadom produktov spoločnosti Samsung, prom, skontaktujte centrum
starostlivosti okazníkov spoločnosti SAMSUNG.
Contactaţi SAMSUNG WORLD WIDE (Samsung în întreaga lume)
Da avi întrebări sau comentarii în legătură cu produsele Samsung, contactaţi centrul de asisteă pentru cliei SAMSUNG.
BN68-01313D-01L09-Cover.indd 1 2007-10-05 �� 2:42:30
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
BN68-01313B-01Eng-1005.indd 1 2007-10-05 �� 10:54:54
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts .........................................................3
Installing the Wall Mount Kit ................................3
Viewing the Control Panel ...................................4
Viewing the Connection Panel ............................5
Viewing the Remote Control ...............................7
Installing Batteries in the Remote Control ...........8
Switching On and Off ..........................................8
Placing Your Television in Standby Mode ...........8
Plug & Play .........................................................9
SETTING THE CHANNELS
Storing Channels Automatically ........................10
Storing Channels Manually ............................... 11
Adding / Locking Channels ...............................12
Sorting the Stored Channels ............................. 13
Assigning Channels Names .............................. 13
Fine Tuning Channel Reception ........................14
LNA (Low Noise Amplier) ................................ 14
SETTING THE PICTURE
Changing the Picture Standard ......................... 15
Adjusting the Custom Picture ............................15
Changing the Colour Tone ................................16
Activating Backlight ........................................... 16
Conguring Detailed Settings on the Picture ....17
Changing the Picture Size ................................18
Selecting the Screen Mode ............................... 18
Digital NR / Active Colour / DNIe /
LED SmartLighting / Movie Plus .......................19
Freezing the Current Picture ............................. 19
Resetting the Picture Settings to the Factory
Defaults ............................................................. 20
Viewing the Picture In Picture (PIP) .................. 20
SETTING THE SOUND
Sound Features ................................................21
Connecting Headphones ..................................22
Selecting the Sound Mode ................................ 22
SETTING THE TIME
Setting and Displaying the Current Time ..........22
Setting the Sleep Timer .....................................23
Switching the Television On and Off
Automatically .....................................................23
FUNCTION DESCRIPTION
Choosing Your Language ..................................24
Upgrading the Software ....................................24
Game Mode/ Blue Screen / Melody /
Light Effect / Energy Saving /
HDMI Black Level / Feature Demo ...................25
Selecting the Source ......................................... 26
Editing the Input Source Names .......................26
USING THE DTV FEATURE
Previewing the DTV Menu System ...................27
Updating the Channel List Automatically ..........28
Updating the Channel List Manually .................28
Editing Your Favourite Channels .......................29
Selecting Channel List ......................................31
Displaying Programme Information ...................31
Viewing the EPG (Electronic Programme Guide)
Information ........................................................32
Using the Scheduled List ..................................33
Setting the Default Guide .................................. 33
Viewing All Channels and Favourite Channels .34
Adjusting the Menu Transparency ....................34
Setting up the Parental Lock ............................. 35
Setting the Subtitle ............................................ 36
Setting the Subtitle Mode .................................. 36
Selecting the Audio Format ...............................36
Selecting the Digital Text (UK only) ...................37
Selecting the Time Zone (Spain only) ...............37
Viewing Product Information .............................37
Checking the Signal Information .......................38
Upgrading the Software ....................................38
Viewing Common Interface ............................... 39
Selecting the CI (Common Interface) Menu ......39
Resetting ........................................................... 40
Selecting the Preferred Language
(Subtitle, Audio or Teletext) ...............................40
Preference ........................................................41
English - 1
English
BN68-01313B-01Eng-1005.indd 1 2007-10-05 �� 10:54:54
English - 2
Symbol Press Important Note One-Touch
Button
USING THE TELETEXT FEATURE
Teletext Decoder ...............................................41
Displaying the Teletext Information ...................42
Selecting a Specic Teletext Page ....................42
Using Fastext to Select a Teletext Page ...........43
Setting Up Your Remote Control .......................43
Remote Control Codes .....................................44
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) .................................. 47
Display Modes ................................................. 47
Setting the PC .................................................. 48
Setting the Home Theatre PC .......................... 49
WISELINK
Using the WISELINK Function ......................... 50
Using the WISELINK Menu .............................. 51
Using the PHOTO (JPEG) List ......................... 52
Using the MP3 List ........................................... 55
Using the Setup Menu ..................................... 56
ABOUT ANYNET
+
What is Anynet
+
? ............................................ 57
Connecting Anynet
+
Devices ........................... 57
Setting Up Anynet
+ ..........................................
58
Scanning and Switching between
Anynet
+
Devices .............................................. 58
Recording ......................................................... 59
Listening through a Receiver ........................... 60
Check Points before Requesting Service ........ 60
RECOMMENDATIONS FOR USE
Wall-Mount Adjustment (Sold separately)
(LE52F9) .......................................................... 61
Using the Anti-Theft Kensington Lock
(depending on the model) ................................ 62
Troubleshooting: Before Contacting
Service Personnel ............................................ 62
Technical and Environmental Specications ... 63
BN68-01313B-01Eng-1005.indd 2 2007-10-05 �� 10:54:54
English - 3
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries
(AAA x 2)
Power Cord Cover-Bottom Cleaning Cloth
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV
is turned on. It may result in personal injury due
to electric shock
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
Installing the Wall Mount Kit
Owners Instructions
Warranty card
Safety Guide
Registration Cards
Warranty card / Safety Guide /
Registration Cards (Not available in all locations)
BN68-01313B-01Eng-1005.indd 3 2007-10-05 �� 10:54:55
English - 4
Viewing the Control Panel
6 56
8
76
6
4
8
7
The product colour and shape may vary depending on the model.
Front Panel buttons
Touch the each button to
operate.
<LE52F9>
<LE70F9>
1 SOURCE
Toggles between all the available input
sources (TV, Ext.1, Ext.2, AV, S-Video,
Component, PC, HDMI1, HDMI2, HDMI3,
DTV). In the on-screen menu, use this button
as you use the ENTER/OK button on the
remote control.
2 MENU
Press to see an on-screen menu of your TV’s
features.
3
Press to decrease or increase the volume.
In the on-screen menu, use the
buttons as you use the
and
buttons on
the remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the
and
buttons on
the remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
5 Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
6 Speakers
7 Remote Control Sensor
Aim the remote control towards this spot on
the TV.
8 (Power)
[LE52F9] Touch the silver sensor below the
( ) mark to turn the TV on and off.
[LE70F9] Press to turn the TV on and off.
Silver sensor
BN68-01313B-01Eng-1005.indd 4 2007-10-05 �� 10:54:56
English - 5
Viewing the Connection Panel
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 EXT 1, EXT 2
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
2 AUDIO OUT(R-AUDIO-L)
- Connect RCA audio cables to AUDIO OUT "R-AUDIO-L" on the rear of your set and the other ends to
corresponding audio in connectors on the Amplifier or DVD Home Theatre.
3 HDMI IN 1, HDMI IN 2, HDMI IN 3
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection, you must use the HDMI IN2 jack.
What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data
and multiple channels of digital audio.
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD
players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When
connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack
and the audio cables to the DVI IN (HDMI2) "R-AUDIO-L" jacks on the back of the TV. If this happens,
contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI
version, then request a firmware update.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
DVI IN (HDMI 2) (R-AUDIO-L)
- DVI audio outputs for external devices.
Connector
EXT 1
EXT 2
Video
o
o
Audio (L/R)
o
o
RGB
o
Output
Video + Audio (L/R)
Only TV or DTV output is available.
Output you can choose.
Input
1 2 3 4
5
3
6
7
8
90!@
The product colour and shape may vary depending on the model.
#
Power Input
[Side Panel Jacks]
BN68-01313D-01Eng-1012.indd 5 2007-10-12 �� 10:01:35
English - 6
Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
480i
X
X
O
480p
X
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
1080i
O
O
O
1080p
O
O
X
4 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5 COMMON INTERFACE Slot
- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other information
will be displayed in about 2~3 minutes. If an error message is displayed, please contact your
service provider.
- When the channel information configuration has finished, the message "Updating Completed" is
displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service provider.
Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD
may cause damage to it.
Insert the CI-Card in the direction marked on it.
6 WISELINK
- Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3)
7 Headphones jack
- Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
8 S-VIDEO or VIDEO / R-AUDIO-L
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on your set and the other ends to corre
sponding audio out connectors on the A/V device.
9 PC IN (PC)/(AUDIO)
- Connect to the video and audio output jack on your PC.
0 DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component.
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV
outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the
DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV.
! SERVICE
- Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV
viewing angle using your remote control.
The model LE70F9 cannot be wall mounted. The EX-LINK jack on this model functions as a service
jack.
@ COMPONENT IN
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your
set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled
Y, B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
# Kensington Lock (depending on the model)
- The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
BN68-01313B-01Eng-1005.indd 6 2007-10-05 �� 10:54:57
English - 7
1 Selects a target device to be
controlled by the Samsung
remote control (TV, DVD,
STB, CABLE, VCR)
(Refer to pages 43~46)
2 Television Standby button
3 Number buttons for direct
channel access
4
One/Two-digit channel
selection
5 It display "Channel List"
on the screen.
6 Selects the TV and DTV
mode directly
7 VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
8 Volume increase
Volume decrease
9 Temporary sound switch-off
0 Displays the main on-screen
menu
! Returns to the previous
menu
# Electronic Program Guide
(EPG) display
$ Picture size selection
% Sound effect selection
^
Adjusts 5 separate devices
- TV, DVD, STB, CABLE, or
VCR
.
& [LE52F9] Press to backlightPress to backlight
the VOL, CH, and the active
source button(TV, DVD,
CABLE, STB, VCR) on the
remote.
[LE70F9] Press to backlight[LE70F9] Press to backlight Press to backlight
the VOL, CH, MUTE and LED
screen.
* Available source selection
( Previous channel
) This function enables you to
view and play photo (JPEG)
and audio files (MP3) from an
external device.
a This remote can be used to
control recording on Samsung
recorders.
(Anynet+ function only)
b P : Next channel
P : Previous channel
c Exit the on-screen menu
d Control the cursor in the
menu
e Use to see information on
the current broadcast
f Runs the Anynet view
functions and sets up Anynet+
devices.
g Colour buttons :
Press to add or delete
channels and to store
channels to the favorite
channel list in the “Channel
List” menu.
h Picture-In-Picture On / Off
i Digital subtitle display
j Picture effect selection
k Picture freeze
l When your remote does not
work, change the batteries
and press the "RESET"
button for 2-3 seconds before
use.
m Display selected input source
and battery status
n Make the remote control
works for TV, DVD, STB,
CATV, VCR (Refer to pages
43~46)
Teletext Functions
6 Exit from the teletext display
0 Teletext index
@ Alternately select Teletext,
Double, or Mix.
$ Teletext size selection
* Teletext mode selection
(LIST/FLOF)
( Teletext sub page
b P : Teletext next page
P : Teletext previous page
c Teletext cancel
e Teletext reveal
g Fastext topic selection
h Teletext hold
j Teletext store
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired, and has Braille points on the Power,
Channel, STOP, PLAY/PAUSE and Volume buttons.
Viewing the Remote Control
[LE70F9]
[LE52F9]
BN68-01313B-01Eng-1005.indd 7 2007-10-05 �� 10:54:58
English - 8
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Installing Batteries in the Remote Control
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWER button or the TV/DTV button on the remote control to turn
the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in
which the menus are to be displayed.
4. To switch your set off, press the POWER button again.
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or
channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday,
for example).
It is best to unplug the set from the mains and aerial.
Placing Your Television in Standby Mode
BN68-01313B-01Eng-1005.indd 8 2007-10-05 �� 10:54:58
English - 9
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local
dealer if you can receive DVB-T signals. Although this TV set
follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not
guaranteed. Several functions may not be available in some
countries.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the
or
button.
Press the ENTER/OK button to confirm your choice.
3. Press the
or
button to select “Shop” or “Home”, then the ENTER/OK button.
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the MENU button for five seconds on the side
panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER/OK button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the
or
button.
Press the ENTER/OK button to confirm your choice.
6. The message “Some DTV functions may not be available. Digital Scan?” is displayed.
Press the or button to select “Yes” or “No”, then press the ENTER/OK button.
This function is supported for all countries except for the following countries : France, Germany,
Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria
7.
The "Auto Store" menu is displayed with the "Start" selected. Press the
ENTER/OK
button.
The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER/OK button at any time to interrupt the memorization process.
For detailed descriptions about DTV channel update, refer to page 28 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed
depending on the country.
8. Press the ENTER/OK button.
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
or
button.
Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
or
button.
You can also set the “Month”, “Day”, “Year”, “Hour” and “Minute” by pressing the number
buttons on the remote control.
9. Press the ENTER/OK button to confirm your setting. The message “Enjoy your viewing” is
displayed. When you have finished, press the ENTER/OK button.
Even if the ENTER/OK button is not pressed, the message will automatically disappear after
several seconds.
Plug & Play
Language
: Select your language.
Country
: Select your country.
Auto Store
: Automatically scans for and stores channels available in the local area.
Clock Set
: Sets the current time for the TV clock.
Plug & Play
Start Plug & Play.
Enter
OK
Yes
:
First an ATV search is performed and then a DTV ch. auto search is performed.
No
:
Only an ATV search is performed.
BN68-01313B-01Eng-1005.indd 9 2007-10-05 �� 10:54:58
English - 10
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the
or
button to select "Setup", then press the
ENTER/OK button.
2. Press the ENTER/OK button again, to select "Plug & Play".
3. The message "Start Plug & Play" is displayed.
(Refer to page 9)
- Storing Channels Automatically
- Storing Channels Manually
TV
Analog Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the
or
button to select "Analog Channel", then press the ENTER/OK button.
2. Press the ENTER/OK button to select "Country".
3. Select the appropriate country by pressing the
or
button.
Press the ENTER/OK button to confirm your choice.
Even though you have changed the country setting in this menu, the country setting for DTV is not
changed. (Refer to page 28)
4. Press the
or
button to select "Auto Store", then press the ENTER/OK button.
5. Press the ENTER/OK button.
The TV will begin memorizing all of the available channels.
Press the ENTER/OK button at any time to interrupt the memorization process and return to the
"Analog Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)
Storing Channels Automatically
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
Home Theatre PC
: Off
Light Effect :
In Watching TV
More
Move Enter Return
Move Enter Return
Plug & Play
Start Plug & Play.
Enter Return
OK
BN68-01313B-01Eng-1005.indd 10 2007-10-05 �� 10:55:00
English - 11
Storing Channels Manually
Not available in DTV or external input mode.
You can store television channels, including those received
via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish
to identify.
1. Press the MENU button to display the menu.
Press the ▲ or button to select "Analog Channel", then
press the ENTER/OK button.
2. Press the ▲ or button to select "Manual Store", then press
the ENTER/OK button.
3. Select the required option by pressing the or button,
then press the ENTER/OK button.
4. When you are satisfied with your setting, press the
ENTER/OK button.
5.
Press the EXIT button to exit.
Programme (Programme number to be assigned to a channel)
− Press the or button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Colour System: Auto/PAL/SECAM/NTSC4.43
− Press the or button to select the required colour standard.
Sound System: BG/DK/I/L
− Press the or button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
− Press the or button to select C (Air channel) or S (Cable channel).
− Press the button, then press the ▲ or button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers)
− Press the or button to start the search.
The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
− Set to "OK" by pressing the ENTER/OK button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have
been assigned to position numbers from P00 to P99. You can select a channel by entering the
position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
Analog Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Move Enter Return
TV
Manual Store
Programme : P 2
Colour System : Auto
Sound System : BG
Channel : C 3
Search : 77 MHz
Store : ?
Move Enter Return
TV
BN68-01313B-01Eng-1005.indd 11 2007-10-05 �� 10:55:00
English - 12
Not available in DTV or external input mode.
Using the Channel Manager, you can conveniently lock or
add channels.
1. Press the MENU button to display the menu.
Press the
or
button to select "Analog Channel", then
press the ENTER/OK button.
2. Press the
or
button to select "Channel Manager",
then press the ENTER/OK button.
Adding channels
Using the Channel List, you can add channels.
3. Select Channel List by pressing the ENTER/OK button.
4. Move to the ( ) field by pressing the ▲, ▼, ◄ or
button, select a channel to be added, and press the ENTER/
OK button to add the channel.
If you press the ENTER/OK button again, the ( )
symbol next to the channel disappears and the channel
is not added.
" " is active when "Child Lock" is selected to "On".
Locking channels
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
5. Press the
or
button to select "Child Lock", then press
the ENTER/OK button.
6. Select "On" by pressing the or button, then press the
ENTER/OK button.
7. Press the
or
button to select "Channel List",
then press the ENTER/OK button.
8. Move to the ( ) field by pressing the ▲, ▼, or button,
select a channel to be locked, and press the ENTER/OK
button.
If you press the ENTER/OK button again, the ( ) symbol
next to the channel disappears and the channel lock is
canceled.
A blue screen is displayed when Child Lock is activated.
9. Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels
which selected on " " to be active or inactive.
You can select these options by simply pressing the CH LIST
button on the remote control
Adding / Locking Channels
TV
Channel Manager
Channel List
Child Lock : Off
P 1 C3
Channel List
Move Enter
Page Return
Add Lock
1 / 10
Prog.
0 C--
1 C3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Move Enter Return
Analog Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Move Enter Return
TV
BN68-01313B-01Eng-1005.indd 12 2007-10-05 �� 10:55:01
English - 13
This operation allows you to change the programme
numbers of the stored channels.
This operation may be necessary after using the auto store.
Not available in DTV or external input mode.
1.
Press the MENU button to display the menu. Press the
or
button to select "Analog Channel", then press the ENTER/OK
button.
2. Press the
or
button to select "Sort", then press the
ENTER/OK button.
3. Select the channel number that you wish to change by press
ing the
or
button repeatedly. Press the ENTER/OK
button.
The selected channel number and name are moved to
right side.
4. Press the
or
button to move to the position in which
you would like to change and then press the ENTER/OK
button.
The selected channel is exchanged with the one
previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the EXIT button to exit.
Sorting the Stored Channels
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the
or
button to select "Analog Channel", then
press the ENTER/OK button.
2. Press the
or
button to select "Name", then press the
ENTER/OK button.
3. If necessary, select the channel to be assigned to a new
name by pressing the
or
button. Press the ENTER/OK
button.
The selection bar is displayed around the name box.
4.
The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9)
Special characters (+, -, *, /, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Then...
Press the or button
Press the button
Press the button
Press the ENTER/OK button
Analog Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
TV
Move Enter Return
Sort
Prog. Ch. Name
0 C--
1 C23
2 C16
3 C3
4 S1
TV
Move Enter Return
Analog Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Move Enter Return
TV
Name
Move Enter Return
Prog. Ch. Name
0 C-- -----
1 C23 -----
2 C16 -----
3 C3 -----
4 S1 -----
TV
BN68-01313B-01Eng-1005.indd 13 2007-10-05 �� 10:55:02
English - 14
If the TV is operating in a weak-signal area, the LNA function
can improve the reception (a low-noise preamplifier boosts
the incoming signal).
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the
or
button to select "Analog Channel", then
press the ENTER/OK button.
2. Press the
or
button to select "LNA", then press the
ENTER/OK button.
3. Press the
or
button to select "On" or "Off".
Press the ENTER/OK button.
4. Press the EXIT button to exit.
Use fine tuning to manually adjust a particular channel for
optimal reception.
Not available in DTV or external input mode.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU button to display the menu.
Press the
or
button to select "Analog Channel", then
press the ENTER/OK button.
3. Press the
or
button to select "Fine Tune", then press
the ENTER/OK button.
4. Press the
or
button to adjust the fine tuning.
Press the ENTER/OK button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the
or
button and then press the ENTER/OK button.
Fine Tuning Channel Reception
LNA (Low Noise Amplier)
Analog Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Fine Tune
P 1
0
Reset
Analog Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
TV
Analog Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA :
Off
On
TV
TV
Move Enter Return
Adjust Save Return
Move Enter Return
Move Enter Return
BN68-01313B-01Eng-1005.indd 14 2007-10-05 �� 10:55:03
English - 15
You can select the type of picture which best corresponds to
your viewing requirements.
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2. Press the ENTER/OK button again, to select "Mode".
3. Press the
or
button to select the desired picture effect.
Press the ENTER/OK button.
4. Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright
room.
Standard: Selects the picture for optimum display in a
normal environment.
Movie: Selects the picture for comfortable display in a
dark room.
The Picture mode must be adjusted separately for each input
source.
You can also press the P.MODE button on the remote control to
select one of the picture settings.
Changing the Picture Standard
Your set has several settings which allow you to control
picture quality.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
2. Press the
or
button to select a particular item. Press
the ENTER/OK button.
3. Press the
or
button to decrease or increase the value
of a particular item. Press the ENTER/OK button.
4. Press the EXIT button to exit.
Adjusting the Custom Picture
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast" and "Brightness" can be adjusted.
"Tint" is only activated for NTSC broadcasting, DTV broadcasting, " Ext.", "AV", "S-Video",
"Component" and "HDMI" modes.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 20)
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
More
TV
Move Enter Return
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
More
TV
Move Enter Return
Dynamic
Standard
Movie
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
More
TV
Move Enter Return
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint:
Adjusts the colour of objects, making them more red or green for a more natural look.
BN68-01313B-01Eng-1005.indd 15 2007-10-05 �� 10:55:04
English - 16
Changing the Colour Tone
You can select the most comfortable colour tone to your
eyes.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
2. Press the or button to select "Colour Tone", then press
the ENTER/OK button.
3. Press the or button to select the desired colour tone
setting. Press the ENTER/OK button.
4. Press the EXIT button to exit
Cool2: Makes the colour temperature bluer than "Cool1"
menu.
Cool1: Makes whites bluish.
Normal: Keeps whites white.
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature redder than
"Warm1" menu.
The adjusted values are stored according to the selected Picture mode.
When the picture mode is set to "Dynamic" or "Standard", "Warm1" and "Warm2" cannot be selected.
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
More
TV
Move Enter Return
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
More
TV
Move Enter Return
Cool 2
Cool 1
Normal
Warm 1
Warm 2
You can adjust the screen brightness by adjusting the LCD
backlight brightness. (0~10)
Activating Backlight
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
2. Press the ▲ or button to select “Backlight”, then press the
ENTER/OK button.
3. Press the ◄ or button to decrease or increase the value of
a particular item.
4. Press the ENTER/OK button.
Press the EXIT button to exit.
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
More
TV
Move Enter Return
10
Backlight
Adjust Return
BN68-01313B-01Eng-1005.indd 16 2007-10-05 �� 10:55:06
English - 17
You can set detailed picture settings.
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2. Press the ▲ or button to select "Detailed Settings", then
press the ENTER/OK button.
3. Select the required option by pressing the or button,
then press the ENTER/OK button.
4. When you are satisfied with your setting, press the
ENTER/OK button.
5. Press the EXIT button to exit.
"Detailed settings" is available in "Standard" or "Movie" mode.
If "DNIe" is Off, the "Detailed Settings" cannot be selected
when the Picture mode is in "Standard" mode.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust
the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ +3
You can adjust the Primary Color (Red, Green, Blue) Intensity.
Press the or button until you reach the optimal setting.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the or ▼ button, then press the ENTER/OK button.
Press the or button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the or ▼ button, then press the ENTER/OK button.
Press the or button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
Edge Enhancement: Off/On
You can emphasize object boundaries.
Colour Space: Auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
XVYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching
movies from an external device (ie. DVD player) connected to the HDMI or
Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.
Only available in "HDMI" and "Component" on "Movie" mode.
If xvYCC function is active, PIP cannot be selected.
Conguring Detailed Settings on the Picture
Picture
Mode : Movie
Contrast 80
Brightness 45
Sharpness 30
Colour 53
Tint G50 R50
Colour Tone : Warm 2
Detailed Settings
Backlight : 5
More
TV
Move Enter Return
Detailed Settings
Black Adjust : Off
Dynamic Contrast
: Off
Gamma : 0
White Balance
My Colour Control
Edge Enhancement
: Off
Colour Space
: Auto
xvYCC
: Off
Move Enter Return
TV
BN68-01313B-01Eng-1005.indd 17 2007-10-05 �� 10:55:06
English - 18
Auto Wide: Automatically adjusts the picture size to the "16:9"
aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction)
to fit the screen size.
4:3: This is the default setting for a video movie or normal
broadcasting.
Just Scan: Use the function to see the full image without any
cutoff when HDMI (720p/1080i/1080p) or Component
(720p/1080i) signals are input.
You can select the picture size which best corresponds to
your viewing requirements.
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2. Press the
or
button to select "Size", then press the
ENTER/OK button.
3. Select the required option by pressing the
or
button.
Press the ENTER/OK button.
4. Press the EXIT button to exit.
"Auto Wide" function is available only in "TV", "DTV", "Ext.1",
"Ext.2", "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Depending on the input source, the picture size options may vary.
The items available may differ depending on the selected mode
Zoom : Select by pressing the ◄ or ► button.◄ or ► button.
Use the ▲ or ▼ button to move the picture up and down.▲ or ▼ button to move the picture up and down.
After selecting , use the ▲ or ▼ button to magnify or▲ or ▼ button to magnify or
reduce the picture size in the vertical direction.
Wide Zoom : Move the screen up/down using the▲ or ▼▲ or ▼ or ▼
button after selecting the by pressing the
► oror ENTER/OK button.
Changing the Picture Size
You can select these options
by simply pressing the P.SIZE
button on the remote control.
Size
Auto Wide
16 : 9
Wide Zoom
Zoom
4 : 3
Just Scan
Picture
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Auto
Active Colour : On
DNle : On
LED SmartLighting :
On
Movie Plus :
On
Reset : OK
More
Move Enter Return
Move Enter Return
TV
TV
When setting the picture size to Auto Wide in a 16:9 wide TV,
you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual
European country requires different picture size so this
function is intended for users to select it.
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select “Picture”.
2. Press the
or
button to select "Screen Mode", then press
the ENTER/OK button.
3. Select the required option by pressing the
or
button.
Press the ENTER/OK button.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
4:3: Sets the picture to 4:3 normal mode.
4. Press the EXIT button to exit.
This function is available in "Auto Wide" mode.
This function is not available in PC, Component or HDMI mode.
Selecting the Screen Mode
TV
Picture
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off
Active Colour : Off
DNle : Off
LED SmartLighting :
On
Movie Plus :
On
Reset : OK
More
16:9
Wide Zoom
Zoom
4:3
Move Enter Return
TV
BN68-01313B-01Eng-1005.indd 18 2007-10-05 �� 10:55:07
1 / 1

Samsung LE52F96BD Manual de utilizare

Categorie
Televizoare LCD
Tip
Manual de utilizare
Acest manual este potrivit și pentru