LG 43LH6047 Manual de utilizare

www.lg.com

Please read this manual carefully before operating your set and

retain it for future reference.

Safety and Reference

OWNER’S MANUAL

LED TV*

* LG LED TV applies LCD screen with LED backlights.

*MFL69311716*

P/NO : MFL69311716(1605-REV02)

Printed in Korea

2

ENGLISH

Safety instructions

Please read these safety precautions carefully before

using the product.

WARNING

Do not place the TV and/or remote control in the following

environments:

t A location exposed to direct sunlight

t An area with high humidity such as a bathroom

t Near any heat source such as stoves and other devices that

produce heat

t Near kitchen counters or humidiers where they can easily be

exposed to steam or oil

t An area exposed to rain or wind

t Near containers of water such as vases

Otherwise, this may result in re, electric shock, malfunction or product

deformation.

Do not place the product where it might be exposed to dust. This may

cause a re hazard.

Mains Plug is the TV connecting/disconnecting device to AC mains

electric supply. This plug must remain readily attached and operable

when TV is in use.

Do not touch the power plug with wet hands. Additionally, if the cord

pin is wet or covered with dust, dry the power plug completely or wipe

dust o. You may be electrocuted due to excess moisture.

Make sure to connect Mains cable to compliant AC mains socket with

Grounded earth pin. (Except for devices which are not grounded on

earth.) Otherwise possibility you may be electrocuted or injured.

Insert power cable plug completely into wall socket otherwise if not

secured completely into socket, re ignition may break out.

Ensure the power cord does not come into contact with hot objects

such as a heater. This may cause a re or an electric shock hazard.

Do not place a heavy object, or the product itself, on power cables.

Otherwise, this may result in re or electric shock.

Bend antenna cable between inside and outside building to prevent

rain from owing in. This may cause water damaged inside the Product

and could give an electric shock.

When mounting TV onto wall make sure to neatly install and isolate

cabling from rear of TV as to not create possibility of electric shock /

re hazard.

3

ENGLISH

Do not plug too many electrical devices into a single multiple electrical

outlet. Otherwise, this may result in re due to over-heating.

Do not drop the product or let it fall over when connecting external

devices. Otherwise, this may result in injury or damage to the product.

Keep the anti-moisture packing material or vinyl packing out of the

reach of children. Anti-moisture material is harmful if swallowed. If

swallowed by mistake, force the patient to vomit and visit the nearest

hospital. Additionally, vinyl packing can cause suocation. Keep it out

of the reach of children.

Do not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

Dispose of used batteries carefully to ensure that a small child does not

consume them. Please seek Doctor- Medical Attention immediately if

child consumes batteries.

Do not insert any metal objects/conductors (like a metal chopstick/

cutlery/screwdriver) between power cable plug and input Wall Socket

while it is connected to the input terminal on the wall. Additionally,

do not touch the power cable right after plugging into the wall input

terminal. You may be electrocuted. (Depending on model)

Do not put or store inammable substances near the product. There is a

danger of combustion/explosion or re due to careless handling of the

inammable substances.

Do not drop metallic objects such as coins, hair pins, chopsticks or wire

into the product, or inammable objects such as paper and matches.

Children must pay particular attention. Electrical shock, re or injury

can occur. If a foreign object is dropped into the product, unplug the

power cord and contact the service centre.

Do not spray water on the product or scrub with an inammable

substance (thinner or benzene). Fire or electric shock accident can

occur.

Do not allow any impact, shock or any objects to fall into the unit,

and do not drop anything onto the screen. You may be injured or the

product can be damaged.

4

ENGLISH

Never touch this product or antenna during a thunder or lighting storm.

You may be electrocuted.

Never touch the wall outlet when there is leakage of gas, open the

windows and ventilate. It may cause a re or a burn by a spark.

Do not disassemble, repair or modify the product at your own

discretion. Fire or electric shock accident can occur.

Contact the service centre for check, calibration or repair.

If any of the following occur, unplug the product immediately and

contact your local service centre.

t The product has been impacted by shock

t The product has been damaged

t Foreign objects have entered the product

t The product produced smoke or a strange smell

This may result in re or electric shock.

Unplug the TV from AC mains wall socket if you do not intend to use the

TV for a long period of time. Accumulated dust can cause re hazard

and insulation deterioration can cause electric leakage/shock/re.

Apparatus shall not be exposed to dripping or splashing and no objects

lled with liquids, such as vases, shall be placed on the apparatus.

Do not install this product on a wall if it could be exposed to oil or oil

mist. This may damage the product and cause it to fall.

If water enters or comes into contact with TV, AC adapter or power

cord please disconnect the power cord and contact service centre

immediately. Otherwise, this may result in electric shock or re.

Only use an authorized AC adapter and power cord approved by

LG Electronics. Otherwise, this may result in re, electric shock,

malfunction or product deformation.

Never Disassemble the AC adapter or power cord. This may result in re

or electric shock.

Be careful in handling the adapter to prevent any external shocks to it.

An external shock may cause damage to the adapter.

Make sure the power cord is connected securely to the power plug on

the TV. (Depending on model)

5

ENGLISH

CAUTION

Install the product where no radio wave occurs.

There should be enough distance between an outside antenna and

power lines to keep the former from touching the latter even when the

antenna falls. This may cause an electric shock.

Do not install the product on places such as unstable shelves or inclined

surfaces. Also avoid places where there is vibration or where the

product cannot be fully supported. Otherwise, the product may fall or

ip over, which may cause injury or damage to the product.

If you install the TV on a stand, you need to take actions to prevent the

product from overturning. Otherwise, the product may fall over, which

may cause injury.

If you intend to mount the product to a wall, attach VESA standard

mounting interface (optional parts) to the back of the product. When

you install the set to use the wall mounting bracket (optional parts), x

it carefully so as not to drop.

Only use the attachments / accessories specied by the manufacturer.

When installing the antenna, consult with a qualied service

technician. If not installed by a qualied technician, this may create a

re hazard or an electric shock hazard.

We recommend that you maintain a distance of at least 2 to 7 times

the diagonal screen size when watching TV. If you watch TV for a long

period of time, this may cause blurred vision.

Only use the specied type of battery. This could cause damage to the

remote control.

Do not mix new batteries with old batteries. This may cause the

batteries to overheat and leak.

Batteries should not be exposed to excessive heat. For example, keep

away from direct Sunlight, open replace and electric heaters.

Do not place non-rechargeable batteries in charging device.

Make sure there are no objects between the remote control and its

sensor.

Signal from Remote Control can be interrupted due to external/internal

lighting eg Sunlight, uorescent lighting. If this occurs turn o lighting

or darken viewing area.

6

ENGLISH

When connecting external devices such as video game consoles, make

sure the connecting cables are long enough. Otherwise, the product

may fall over, which may cause injury or damage the product.

Do not turn the product On/O by plugging-in or unplugging the power

plug to the wall outlet. (Do not use the power plug for switch.) It may

cause mechanical failure or could give an electric shock.

Please follow the installation instructions below to prevent the product

from overheating.

t The distance between the product and the wall should be more

than 10cm.

t Do not install the product in a place with no ventilation (e.g., on a

bookshelf or in a cupboard).

t Do not install the product on a carpet or cushion.

t Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in re.

Take care not to touch the ventilation openings when watching the TV

for long periods as the ventilation openings may become hot. This does

not aect the operation or performance of the product.

Periodically examine the cord of your appliance, and if its appearance

indicates damage or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an exact replacement part

by an authorized servicer.

Prevent dust collecting on the power plug pins or outlet. This may cause

a re hazard.

Protect the power cord from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and the point where the cord

exits the appliance.

Do not press strongly upon the panel with a hand or sharp object such

as nail, pencil or pen, or make a scratch on it, as it may causedamage

to screen.

Avoid touching the screen or holding your nger(s) against it for long

periods of time. Doing so may produce some temporary or permanent

distortion/damage to screen.

When cleaning the product and its components, unplug the power

rst and wipe it with a soft cloth. Applying excessive force may cause

scratches or discolouration. Do not spray with water or wipe with a wet

cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax,

benzene, alcohol etc., which can damage the product and its panel.

Otherwise, this may result in re, electric shock or product damage

(Deformation, corrosion or breakage).

As long as this unit is connected to the AC wall outlet, it is not

disconnected from the AC power source even if you turn o this unit

by SWITCH.

7

ENGLISH

When unplugging the cable, grab the plug and unplug it, by pulling at

the plug.

Don’t pull at the cord to unplug the power cord from the power board,

as this could be hazardous.

When moving the product, make sure you turn the power o rst. Then,

unplug the power cables, antenna cables and all connecting cables.

The TV set or power cord may be damaged, which may create a re

hazard or cause electric shock.

When moving or unpacking the product, work in pairs because the

product is heavy. Otherwise, this may result in injury.

Refer all servicing to qualied service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

If the product feels cold to the touch, there may be a small “icker”

when it is turned on. This is normal, there is nothing wrong with

product.

This panel is an advanced product that contains millions of pixels.

You may see tiny black dots and/or brightly coloured dots (red, blue

or green) at a size of 1ppm on the panel. This does not indicate a

malfunction and does not aect the performance and reliability of the

product.

This phenomenon also occurs in third-party products and is not subject

to exchange or refund.

You may nd dierent brightness and color of the panel depending on

your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not

related with the product performance, and it is not malfunction.

Displaying a still image for a prolonged period of time may cause image

sticking. Avoid displaying a xed image on the TV screen for a long

period of time.

Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning

o the TV is generated by plastic thermal contraction due to tempera-

ture and humidity. This noise is common for products where thermal

deformation is required. Electrical circuit humming/panel buzzing:

A low level noise is generated from a high-speed switching circuit,

which supplies a large amount of current to operate a product. It varies

depending on the product.

This generated sound does not aect the performance and reliability

of the product.

Do not use high voltage electrical goods near the TV (e.g. electric

mosquito-swatter). This may result in product malfunction.

8

ENGLISH

Preparing

NOTE

t If the TV is turned on for the rst time after it was shipped from

the factory, initialization of the TV may take a few minutes.

(Depending on model)

t Image shown may dier from your TV.

t Your TV’s OSD (On Screen Display) may dier slightly from that

shown in this manual.

t The available menus and options may dier from the input source

or product model that you are using.

t New features may be added to this TV in the future.

t The items supplied with your product may vary depending on the

model.

t Product specications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

t For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not t into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

t Use a certied cable with the HDMI logo attached.

t If you do not use a certied HDMI

cable, the screen may not display

or a connection error may occur. (Recommended HDMI

Cable Types)

- High-Speed HDMI®/

TM

Cable (3m or less)

- High-Speed HDMI®/

TM

Cable with Ethernet (3m or less)

t How to use the ferrite core (Depending on model)

- Use the ferrite core to reduce the electromagnetic interference in

the power cord. Wind the power cord on the ferrite core once.

[Wall side]

[TV side]

10 cm (+ / -2 cm)

t This Smart TV is for VOD watching service, some smart functions

may not be supported including web browser. (Only LH57**)

CAUTION

t Do not use any unapproved items to ensure the safety and product

life span.

t Any damage or injuries caused by using unapproved items are not

covered by the warranty.

t Some models have a thin lm attached on to the screen and this

must not be removed.

t When attaching the stand to the TV set, place the screen facing

down on a cushioned table or at surface to protect the screen

from scratches.

t Make sure that the screws are fastened completely. (If they are

not fastened securely enough, the TV may tilt forward after being

installed.) Do not use too much force and over tighten the screws;

otherwise screw may be damaged and not tighten correctly.

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched

or damaged and for safe transportation regardless of its type and size.

t It is recommended to move the TV in the box or packing material

that the TV originally came in.

t Before moving or lifting the TV, disconnect the power cord and

all cables.

t When holding the TV, the screen should face away from you to

avoid damage.

t Hold the top and bottom of the TV frame rmly. Make sure not to

hold the transparent part, speaker, or speaker grill area.

9

ENGLISH

t When transporting a large TV, there should be at least 2 people.

t When transporting the TV by hand, hold the TV as shown in the

following illustration.

t When transporting the TV, do not expose the TV to jolts or

excessive vibration.

t When transporting the TV, keep the TV upright, never turn the TV

on its side or tilt towards the left or right.

t Do not apply excessive pressure to cause exing /bending of frame

chassis as it may damage screen.

t When handling the TV, be careful not to damage the protruding

buttons.

CAUTION

t Avoid touching the screen at all times, as this may result in damage

to the screen.

t Do not move the TV by holding the cable holders, as the cable

holders may break, and injuries and damage to the TV may occur.

Using the button

(Depending on model)

You can simply operate the TV functions, pressing or moving the button.

NOTE

t LH57/59 series does not have a Joystick functions but has only a

power On/O button.

Joystick Button

Dome Button

or

Basic functions

Power On (Press)

Power O (Press and hold)

1

Volume Control

Programmes Control

1 All running apps will close, and any recording in progress will stop.

Adjusting the menu

When the TV is turned on, press the button one time. You can adjust

the Menu items pressing or moving the buttons.

Turns the power o.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

Accesses the settings menu.

Mounting on a table

1 Lift and tilt the TV into its upright position on a table.

t Leave a 10 cm (minimum) space from the wall for proper

ventilation.

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

t Do not place the TV near or on sources of heat, as this may result in

re or other damage.

10

ENGLISH

Securing the TV to a wall

(This feature is not available for all models.)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back

of the TV.

t If there are bolts inserted at the eye-bolts position, remove the

bolts rst.

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear

of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the at surface.

CAUTION

t Make sure that children do not climb on or hang on the TV.

NOTE

t Use a platform or cabinet that is strong and large enough to

support the TV securely.

t Brackets, bolts and ropes are not provided. You can obtain

additional accessories from your local dealer.

Mounting on a wall

Attach an optional wall mount bracket at the rear of the TV carefully

and install the wall mount bracket on a solid wall perpendicular to

the oor. When you attach the TV to other building materials, please

contact qualied personnel. LG recommends that wall mounting be

performed by a qualied professional installer. We recommend the use

of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with

cables connected. When you do not use LG’s wall mount bracket, please

use a wall mount bracket where the device is adequately secured to the

wall with enough space to allow connectivity to external devices. It is

advised to connect all the cables before installing xed wall mounts.

10 cm

Make sure to use screws and wall mount bracket that meet the VESA

standard. Standard dimensions for the wall mount kits are described in

the following table.

Separate purchase(Wall mounting bracket)

Model

32/43LH57**

32/43LH59**

32/40/43LH60**

32/43LH61**

32/43LH63**

49LH57**

49LH59**

49/55LH60**

49/55LH61**

49/55LH63**

VESA (A x B) (mm) 200 x 200 300 x 300

Standard screw M6 M6

Number of screws 4 4

Wall mount

bracket

LSW240B

MSW240

LSW350B

MSW240

Model

55LH57**

55LH59**

VESA (A x B) (mm) 400 x 400

Standard screw M6

Number of screws 4

Wall mount

bracket

LSW440B

MSW240

A

B

11

ENGLISH

CAUTION

t Remove the stand before installing the TV on a wall mount by

performing the stand attachment in reverse.

NOTE

t When installing the wall mounting bracket, use the adhesive label

or protective cover provided. The adhesive label or protective cover

will protect the opening from accumulating dust and dirt. (Only

when the label or cover is provided)

Provided item

Adhesive Label

Provided item

Adhesive label

Provided item

Protective cover

t When installing the wall mounting bracket, it is recommended to

cover the stand hole using tape, in order to prevent the inux of

dust and insects. (Depending on model)

Stand hole

t When attaching a wall mounting bracket to the TV, insert the wall

mount spacers into the TV wall mount holes to adjust the vertical

angle of the TV. (Only when the item of the following form is

provided)

Provided Item

Wall mount spacer

t Depending on the shape of the stand, use a at tool to remove the

stand cover as illustrated below. (e.g., a at screwdriver)

(Only when the item of the following form is provided)

Flat tool

12

ENGLISH

Connections (notications)

Connect various external devices to the TV and switch input modes to

select an external device. For more information of external device’s

connection, refer to the manual provided with each device.

Available external devices are: HD receivers, DVD players, VCRs, audio

systems, USB storage devices, PC, gaming devices, and other external

devices.

NOTE

t The external device connection may dier from the model.

t Connect external devices to the TV regardless of the order of the

TV port.

t If you record a TV program on a DVD recorder or VCR, make sure to

connect the TV signal input cable to the TV through a DVD recorder

or VCR. For more information of recording, refer to the manual

provided with the connected device.

t Refer to the external equipment’s manual for operating

instructions.

t If you connect a gaming device to the TV, use the cable supplied

with the gaming device.

t In PC mode, there may be noise associated with the resolution,

vertical pattern, contrast or brightness. If noise is present, change

the PC output to another resolution, change the refresh rate to

another rate or adjust the brightness and contrast on the PICTURE

menu until the picture is clear.

t In PC mode, some resolution settings may not work properly

depending on the graphics card.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

t Use a signal splitter to use more than 2 TVs.

t If the image quality is poor, install a signal amplier properly to

improve the image quality.

t If the image quality is poor with an antenna connected, try to

realign the antenna in the correct direction.

t An antenna cable and converter are not supplied.

t Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,

HE-AAC

Satellite dish connection

(Only satellite models)

Connect the TV to a satellite dish to a satellite socket with a satellite RF

cable (75 Ω).

CI module connection

(Depending on model)

View the encrypted (pay) services in digital TV mode.

t Check if the CI module is inserted into the PCMCIA card slot in the

right direction. If the module is not inserted properly, this can

cause damage to the TV and the PCMCIA card slot.

t If the TV does not display any video and audio when CI+ CAM is

connected, please contact to the Terrestrial/Cable/Satellite Service

Operator.

USB connection

Some USB Hubs may not work. If a USB device connected through a USB

Hub is not detected, connect it directly to the USB port on the TV.

Other connections

Connect your TV to external devices. For the best picture and audio

quality, connect the external device and the TV with the HDMI cable.

Some separate cable is not provided.

NOTE

t Supported HDMI Audio format :

Dolby Digital (32 kHz, 44.1 kHz, 48 kHz),

DTS (44.1 kHz, 48 kHz),

PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)

(Depending on model)

13

ENGLISH

Remote control

(Depending on model)

The descriptions in this manual are based on the buttons on the remote

control. Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5

V AAA) matching the

and ends to the label inside the

compartment, and close the battery cover. To remove the batteries,

perform the installation actions in reverse.

Make sure to point the remote control toward the remote control sensor

on the TV.

A

B

1

2

3

4

5

6

7

A

(POWER) Turns the TV on or o.

Selects Radio, TV and DTV programme.

1

,

4

(INPUT) Changes the input source. (Depending on

model)

1

,

4

Recalls your preferred subtitle in digital mode.

(Depending on model)

2

(Q. Settings) Accesses the Quick Settings. (Depending on

model)

2

By pressing the AD button, audio descriptions function will be

enabled. (Depending on model)

3

Views the information of the current programme and

screen. (Depending on model)

3

By zooming in on the selected area, you can view it in

full screen. (Depending on model)

3

Resizes an image. (Depending on model)

B

Number buttons Enters numbers.

Alphabet buttons Enters letters. (Depending on model)

Accesses the saved programmes list.

(Space) Opens an empty space on the screen keyboard.

(Depending on model)

5

,

7

Shows programme guide. (Depending on model)

5

Returns to the previously viewed programme.

(Depending on model)

Adjusts the volume level.

6

Views the information of the current programme and

screen. (Depending on model)

6

,

7

(SEARCH) Search for content such as TV programmes,

movies and other videos, or perform a web search by entering text in

the search bar. (Depending on model)

6

Accesses your favourite programme list. (Depending on

model)

(MUTE) Mutes all sounds.

 Scrolls through the saved programmes.

 Moves to the previous or next screen.

C

D

8

9

10

11

12

13

14

15

16

14

ENGLISH

C

8

Shows the previous history. (Depending on model)

8

,

9

,

10

,

11

,

12

,

13

Teletext buttons ( )

These buttons are used for teletext. (Depending on model)

(HOME) Accesses the Home menu.

9

Shows the list of Programmes and Recommended.

(Depending on model)

10

,

12

Returns to the previous level. (Depending on model)

10

(Q. Settings) Accesses the Quick Settings. (Depending on

model)

11

,

13

Clears on-screen displays and returns to TV viewing.

(Depending on model)

11

Accesses the Quick menus. (Depending on model)

Navigation buttons (up/down/left/right) Scrolls through menus

or options.

Selects menus or options and conrms your input.

D

14

By pressing the AD button, audio descriptions function will be

enabled. (Depending on model)

14

Views the information of the current programme and

screen. (Depending on model)

15

Starts to record and displays record menu.

(Only Time Machine

Ready

supported model) (Depending on model)

15

By zooming in on the selected area, you can view it

in full screen. (Depending on model)

15

Set the sleep timer. (Depending on model)

15

Selects the MHP TV menu source. (Depending on model)

16

Returns to LIVE TV. (Depending on model)

Control buttons ( ) Controls media contents.

Coloured buttons These access special functions in some menus.

( : Red, : Green, : Yellow, : Blue)

Licenses

Supported licenses may dier by model. For more information about

licenses, visit www.lg.com.

Open source software

notice information

To obtain the source code under GPL, LGPL, MPL and other open source

licenses, that is contained in this product, please visit http://opensource.

lge.com.

In addition to the source code, all referred license terms, warranty

disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM

for a charge covering the cost of performing such distribution (such

as the cost of media, shipping, and handling) upon email request to

[email protected]om. This oer is valid for three (3) years from the date

on which you purchased the product.

External control device

setup

To obtain the external control device setup information, please visit

www.lg.com.

15

ENGLISH

Troubleshooting

Cannot control the TV with the remote control.

t Check the remote control sensor on the product and try again.

t Check if there is any obstacle between the product and the remote

control.

t Check if the batteries are still working and properly installed (

to , to ).

No image display and no sound is produced.

t Check if the product is turned on.

t Check if the power cord is connected to a wall outlet.

t Check if there is a problem in the wall outlet by connecting other

products.

The TV turns o suddenly.

t Check the power control settings. The power supply may be

interrupted.

t Check if the Sleep Timer / Timer Power Off is activated in the

Timers settings.

t Check if the Auto Power O is activated in the General -> Eco

Mode settings. (Depending on model)

t If there is no signal while the TV is on, the TV will turn o

automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ is

displayed.

t Turn the TV o/on using the remote control.

t Reconnect the HDMI cable.

t Restart the PC with the TV on.

Specications

Wireless module

specification

t As band channels can vary per country, the user cannot change or

adjust the operating frequency. This product is congured for the

regional frequency table.

t For consideration of the user, this device should be installed and

operated with a minimum distance of 20 cm between the device

and the body.

Wireless LAN module (TWFM-B006D) specifications

Standard IEEE802.11a/b/g/n

Frequency Range Output Power (Max.)

2400 to 2483.5 MHz

5150 to 5250 MHz

5725 to 5850 MHz (for Non EU)

14 dBm

12.5 dBm

15.5 dBm

AC/DC Adapter

32LH57**, 32LH59**

Manufacturer : APD

Model : DA-48G19

Manufacturer : Lien Chang

Model : LCAP45

In : AC 100 - 240 V ~ 50/60 Hz

Out : DC 19 V

2.53 A

16

ENGLISH

CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm

Environment condition

Operating Temperature

0 °C to 40 °C

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C

Storage Humidity Less than 85 %

(Depending on country)

Digital TV Analogue TV

Satellite Terrestrial Cable Terrestrial / Cable

Television system DVB-S/S2*

DVB-T

DVB-T2*

DVB-C

PAL/SECAM B/G, D/K, I,

SECAM L

Channel coverage

(Band)

950 ~ 2150 Mhz

VHF III : 174 ~ 230 Mhz

UHF IV : 470 ~ 606 Mhz

UHF V : 606 ~ 862 Mhz

S Band II : 230 ~ 300 Mhz

S Band III : 300 ~ 470 Mhz

46 ~ 862 Mhz 46 ~ 862 Mhz

Maximum number of

storable programmes

6,000

2,000 (LH57**)

3,000 (LH59**, LH60**, LH61**, LH63**)

External antenna

impedance

75 Ω

* Only DVB-T2/C/S2 support models.

www.lg.com

"L¨T[»M¨LIBT[OMBUCBW¨UFMFFMďUUŻHZFMNFTFOPMWBTTBFMB[

¹UNVUBU²U¨TďSJ[[FNFHNFSUL¨TďCCT[»LT¨HFMFIFUS

#J[UPOTHJ²WJOU¨[LFE¨TFL

HASZNÁLATI ÚTMUTATÓ

LED TV*

* "[-(-&%57NFHOFWF[¨TB-&%IUU¨SG¨OOZFMFMMUPUU

-$%L¨QFSOZďLSFWPOBULP[JL

2

MAGYAR

Biztonsági tudnivalók

A készülék használata előtt kérjük, gyelmesen

olvassa el a következő biztonsági óvintézkedéseket.

VIGYÁZAT

Ne helyezze a TV-készüléket és a távirányítót a következő

környezetekbe:

t Közvetlen napsugárzásnak kitett helyek

t Nedves területek, például fürdőszoba

t Hőforrás közelébe, például kályhák és egyéb hőt kibocsátó

eszközök

t Konyhai berendezések vagy párologtató készülékek közelébe, ahol

könnyen ki vannak téve gőznek vagy olajnak

t Esőnek vagy szélnek kitett helyek

t Vizet tartalmazó tárgyak, például vázák közelébe

Ellenkező esetben tűz, áramütés, hibás működés vagy deformálódás

következhet be.

Ne helyezze a készüléket olyan helyre, ahol por érheti.

Ez tűzveszélyes lehet.

A hálózati csatlakozódugó a készülék áramtalanítására szolgál. A

dugónak könnyen hozzáférhetőnek kell lennie.

Ne érintse meg a tápkábelt nedves kézzel. Ha a csatlakozódugó tűi

nedvesek vagy porosak, törölje teljesen szárazra, illetve portalanítsa.

Ellenkező esetben a nedvesség halálos áramütést okozhat.

A tápkábelt minden esetben földelt konnektorhoz csatlakoztassa.

(Kivéve a földelés nélküli eszközöket.)

Halálos áramütést vagy sérülést szenvedhet.

A tápkábelt szorosan csatlakoztassa az aljzathoz.

A nem megfelelően csatlakoztatott tápkábel tüzet okozhat.

Győződjön meg róla, hogy a tápkábel nem ér forró tárgyakhoz, például

fűtőtesthez. Ez tűzveszélyes és áramütést okozhat.

A kábelre se nehéz tárgyat, se készüléket ne helyezzen.

Ellenkező esetben tüzet vagy áramütést okozhat.

Hajlítsa el az antenna kábelét az épület belső és külső tere között úgy,

hogy ne juthasson bele esővíz.

Az eső tönkreteheti a készülék belsejét, és áramütést is okozhat.

Ha TV-készüléket szerel a falra, gondoskodjon arról, hogy azt ne a TV

hátulján lévő táp- és jelkábelnél fogva akassza fel.

Ez tüzet vagy áramütést okozhat.

3

MAGYAR

Ne dugjon túl sok elektromos eszközt egyetlen, több csatlakozó

számára készült aljzatba.

Ellenkező esetben a túlmelegedés miatt tűz keletkezhet.

Ne ejtse le a készüléket, illetve ne ejtse le külső eszközök

csatlakoztatása közben.

Ellenkező esetben sérülést okozhat vagy kárt tehet a készülékben.

A csomagolásban található nedvszívó anyagot és a műanyag

csomagolóanyagot tartsa távol a gyermekektől.

Lenyelve a nedvszívó anyag káros lehet a szervezetre. Az anyagot

véletlenül lenyelő személyt meg kell hánytatni, és a legközelebbi

kórházba kell szállítani. A műanyag csomagolóanyag fulladást is

okozhat. Tartsa gyermekektől távol.

Ne engedje, hogy gyermekei felmásszanak a TV-készülékre vagy azon

lógjanak. Ellenkező esetben a TV leeshet, ami súlyos sérülést okozhat.

Járjon el körültekintően az elemek leselejtezése során, nehogy

gyermekei megegyék azokat. Ha esetleg lenyelnék, azonnal forduljon

orvoshoz.

Ne dugjon áram vezetésére alkalmas tárgyat (például fém evőpálcát) a

fali aljzathoz csatlakoztatott tápkábel szabad végébe. Ne érintse meg a

tápkábelt közvetlenül azután, hogy kihúzta azt a fali aljzatból.

Halálos áramütést szenvedhet! (Típusfüggő)

Ne helyezzen el és ne tároljon gyúlékony anyagokat a készülék

közelében. A gyúlékony anyagok gondatlan kezelése robbanás- és

tűzveszélyes.

Ne ejtsen a készülékbe fémtárgyakat, például pénzérmét, hajtűt,

evőpálcát vagy drótot, illetve gyúlékony anyagokat, például papírt vagy

gyufát. Különösen ügyeljen a gyermekekre!

Áramütés, tűz vagy személyi sérülés kockázata áll fenn. Ha idegen

tárgy kerül a készülékbe, húzza ki a tápkábelt és lépjen kapcsolatba az

ügyfélszolgálattal.

Ne permetezzen vizet a készülékre és ne tisztítsa gyúlékony anyaggal

(hígítóval vagy benzinnel). Tűz vagy áramütéses baleset következhet

be.

Vigyázzon, hogy semmilyen tárgy ne essen rá, illetve ne üsse meg a

készüléket és a képernyőt.

Ez személyi sérülést vagy a készülék károsodását okozhatja.

4

MAGYAR

Villámlás vagy vihar idején ne érjen hozzá a készülékhez és az

antennához. Halálos áramütést szenvedhet!

Gázszivárgás esetén semmilyen esetben se érintse meg a fali aljzatot.

Nyissa ki az ablakokat és szellőztessen! Ellenkező esetben a szikra tüzet

vagy égési sérülést okozhat.

Ne szerelje szét, ne kísérelje meg megjavítani és ne alakítsa át saját

belátása szerint a készüléket. Tűz vagy áramütéses baleset következhet

be. Ellenőrzést, beállítást és javítást kizárólag a szervizközponttal

végeztessen.

Ha az alábbiak egyike bekövetkezik, azonnal húzza ki a készüléket, és

vegye fel a kapcsolatot a helyi szervizközponttal.

t A készülék rázkódásnak volt kitéve

t A készülék megsérült

t Idegen tárgyak kerültek a készülékbe

t A készülékből füst vagy furcsa szag távozott

Ez tüzet vagy áramütést okozhat.

Ha a készüléket hosszabb ideig nem kívánja használni, húzza ki a

tápkábelt a készülékből.

A kábelt borító por tüzet okozhat, a szigetelés meghibásodása miatt

pedig áramszivárgás, áramütés vagy tűz következhet be.

A készülékre ne csöpögtessen vagy permetezzen folyadékot, és ne

helyezzen rá folyadékkal teli tárgyakat, például vázát.

Ne szerelje fel a terméket olyan falra, amely olajnak vagy olajpárának

lehet kitéve. Ez kárt tehet a termékben, és a termék leesését okozhatja.

Amennyiben víz vagy egyéb anyag kerül a termékbe (például

AC adapterbe, tápkábelbe, vagy TV-be), húzza ki a tápkábelt, és

haladéktalanul értesítse a szervizközpontot. Ellenkező esetben tüzet

vagy áramütést okozhat.

Kizárólag az LG Electronics által jóváhagyott AC adaptert és tápkábelt

használjon. Ellenkező esetben tűz, áramütés, hibás működés vagy

deformálódás következhet be.

Soha ne szerelje szét az AC adaptert vagy a tápkábelt. Ez tüzet vagy

áramütést okozhat.

Óvatosan kezelje az adaptert, nehogy külső behatás érje. Bármely

típusú külső behatás károsíthatja az adaptert.

Győződjön meg arról, hogy a tápkábel megfelelően csatlakozik a TV-n

található csatlakozódugóhoz. (Típusfüggő)

Pagina se încarcă...

LG 43LH6047 Manual de utilizare

LG 43LH6047 Manual de utilizare

în alte limbi

Lucrări înrudite