Samsung UE32K5102AK Manual de utilizare

Categorie
Televizoare LCD
Tip
Manual de utilizare

Acest manual este potrivit și pentru

USER MANUAL
4 & 5 SERIES
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at www.samsung.com/register
Model_________________ Serial No._______________________
UK5100B_BT_BN68-07346W-03_L08.indb 1 2016-07-11 �� 11:24:25
Warning! Important Safety Instructions
(Please read the Safety Instructions before using your TV.)
CAUTION
Class II product : This symbol indicates that it does
not require a safety connection to electrical earth
(ground).
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED
PERSONNEL.
AC voltage : This symbol indicates that the rated
voltage marked with the symbol is AC voltage
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
DC voltage : This symbol indicates that the rated
voltage marked with the symbol is DC voltage.
This symbol indicates that this product has
included important literature concerning operation
and maintenance.
Caution, Consult Instructions for use : This symbol
instructs the user to consult the user manual for
further safety related information.
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable
operation of this apparatus and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is
provided.
- Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
- Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorised dealer
immediately.
This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of
these batteries properly. Please contact your local authorities for disposal or recycling information.
Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against
them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit from the appliance.
To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and
power line surges.
Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of the DC adaptor
corresponds to the local electrical supply.
Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on
the power cord's plug. Never unplug it by pulling on the power cord. Do not touch the power cord with wet hands.
If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug
it immediately and contact an authorised dealer or service centre.
English - 2
UK5100B_BT_BN68-07346W-03_L08.indb 2 2016-07-11 �� 11:24:26
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended
period of time (especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks
and heat or by causing the insulation to deteriorate.
Be sure to contact an authorised service centre for information if you intend to install your TV in a location with heavy dust,
high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an aerial
port, a train station, etc. Failure to do so may lead to serious damage to your TV.
Use only a properly grounded plug and wall outlet.
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
To turn off this apparatus completely, disconnect it from the wall outlet. Be sure to have the wall outlet and power plug
readily accessible.
Store the accessories (battery, etc.) in a location safely out of the reach of children.
Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service centre.
To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not
use any chemicals such as wax, benzene, alcohol, thinners, insecticide, aerial fresheners, lubricants, or detergents. These
chemicals can damage the appearance of the TV or erase the printing on the product.
Do not expose this apparatus to dripping or splashing.
Do not dispose of batteries in a fire.
Do not short-circuit, disassemble, or overheat the batteries.
There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only
with the same or equivalent type.
When using the AC plug that is a dedicated adapter plug provided from Samsung, pay attention to the following:
Insert the AC plug into the adapter until a "click" sound is heard.
Never remove the AC plug after insertion. (Cannot be removed)
Do not insert only the AC plug into an outlet.
Do not use the provided AC plug with other devices.
Do not insert plugs other than the provided AC plug into the adapter.
When removing the adapter from an outlet, pull its body vertically.
Do not insert the adapter into the outlet on the ceiling.
Do not drop objects or apply shock on the adapter.
Do not rotate it over the range indicated on the adapter.
It may cause electric shock or fire.
Remove the vinyl cover of the adapter before using the adapter. Otherwise, this may result fire.
* Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product
appearance. Product design and specifications may change without notice.
CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for customers in EU
region.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall not be placed
onthe apparatus.
WARNING: FOR INDOOR USE ONLY
English
English - 3
UK5100B_BT_BN68-07346W-03_L08.indb 3 2016-07-11 �� 11:24:26
What's in the Box?
Make sure that the following items are included with your TV. If there are any items missing, contact your local dealer.
Remote Control & Batteries (AAA x 2) Power Cord (Depending on the country and model)
Regulatory Guide Warranty Card (Not available in some locations)
User Manual AC PLUG-CONVERSION (Depending on the country and model)
Power Adapter
(Depending on the country and model)
Adjusting the angle of the plug on the power adapter
- Never turn the plug until it exceeds the allowed range on the power adapter.
- The colours and shapes of the items differ with the model.
- Cables not supplied with this product can be purchased separately.
- Open the box and check for any accessory items hidden behind or inside the packing materials.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but there will be no defect with the product (i.e., where the user manual has
not been read).
(b) You bring the unit to a repair centre, but there will be no defect identified the product (i.e., where the user manual has
not been read).
You will be informed of the administration fee amount before a technician visits.
Warning: Screens can be damaged from direct pressure when handled
incorrectly. We recommend lifting the TV at the edges, as shown.
Do Not Touch
This Screen!
English - 4
UK5100B_BT_BN68-07346W-03_L08.indb 4 2016-07-11 �� 11:24:27
Using the TV Controller
You can turn on the TV with the TV controller button at the bottom of the TV, and then use the Control Menu. The Control
Menu appears when the button is pressed while the TV is On. For more information about its usage, refer to the figure below.
Press: Move
Press & Hold: Select
The TV controller is placed at the bottom of the TV.
TV controller / Remote control sensor
: Power off
: Channel Up
: Channel Down
: Volume Up
: Volume Down
: Source
Control Menu
English
English - 5
UK5100B_BT_BN68-07346W-03_L08.indb 5 2016-07-11 �� 11:24:28
The Remote Control
- This remote control has Braille points on the Power, Channel, Volume and Enter buttons and can be used by visually
impaired persons.
y
: Adjusts the volume.
MUTE: Turns the sound on/off.
z
: Changes the current channel.
CH LIST: Launches the Channel List.
MEDIA.P: Displays Media Play.
MENU: Displays the main on-screen menu.
GUIDE: Displays the Electronic Programme Guide (EPG).
Number: Gives direct access to channels.
TTX/MIX: Alternately selects Teletext ON, Double, Mix or OFF.
PRE-CH: Returns to the previous channel.
Use these buttons according to the directions on the TV screen.
TOOLS: Quickly select frequently used functions.
INFO: Displays information about the current programme or content.
(Enter): Selects or runs a focused item.
u
d
l
r
: Moves the cursor, selects the on-screen menu items, and changes the
values seen on the TV's menu.
RETURN: Returns to the previous menu or channel.
EXIT: Exits the menu.
(Power): Turns the TV on and off.
SOURCE: Displays and selects available video sources.
E-MANUAL: Displays the e-Manual guide.
PIC SIZE: Lets you select the Picture Size.
AD/SUBT.: Audio Description selection. (Not available in some locations) /
Displays digital subtitles.
'
: Stops playing content.
Use these buttons with specific features. Use these buttons according to the
directions on the TV screen.
- The button names above may be differ from the actual names.
Installing batteries into the remote control
1
3
2
English - 6
UK5100B_BT_BN68-07346W-03_L08.indb 6 2016-07-11 �� 11:24:28
Changing the Input Source
Source
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected
to the TV.
1. Press the SOURCE button on your remote.
2. Select a desired external input source.
- TV / HDMI1 / HDMI2/DVI / AV / Component
- In the Source, connected inputs will be highlighted.
- PC(D-Sub) input is not supported. If you want to connect PC to the TV, you can connect the HDMI to DVI cable with the
HDMI IN 2(DVI) port on the TV.
How to use Edit Name
In the Source, press the TOOLS button, and then you can set an external input sources name you want.
- When connecting a PC to the HDMI IN 2(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
- When connecting a PC to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under
Edit Name.
- When connecting an AV devices to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices
mode under Edit Name.
Information
You can see detailed information about the connected external device.
English
English - 7
UK5100B_BT_BN68-07346W-03_L08.indb 7 2016-07-11 �� 11:24:29
Connecting to a COMMON INTERFACE slot (Your TV
viewing Card Slot)
- Depending on the country and model.
- Turn the TV off to connect or disconnect a CI card.
Using the CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.

If you don’t insert the “CI or CI+ CARD”, some channels will display the
message “Scrambled Signal”.

The pairing information containing a telephone number, the “CI or CI+ CARD”
ID the Host ID and other information will be displayed in about 2~3 minutes.
If an error message is displayed, please contact your service provider.

When the configuration of channel information has finished, the message
“Updating Completed” is displayed, indicating the channel list is updated.

NOTE
- The image may differ depending on
the model.
- You must obtain a “CI or CI+ CARD” from a local cable service provider.
- When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
cause damage to it.
- Insert the “CI or CI+ CARD” in the direction marked on the card.
- The location of the COMMON INTERFACE slot may be different depending on the model.
- “CI or CI+ CARD” is not supported in some countries and regions; check with your authorised dealer.
- If you have any problems, please contact a service provider.
- Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.
English - 8
UK5100B_BT_BN68-07346W-03_L08.indb 8 2016-07-11 �� 11:24:29
The e-Manual
MENU
m
Supporte-Manual ENTER
E
You can find instructions about your TV’s features in the e-Manual in your TV. To use, press the E-MANUAL
button on your remote. Move the cursor using the up/down/right/left buttons to highlight a category, then
a topic, and then press the ENTER
E
button. The e-Manual displays the page you want to see.
You can also access it through the menu:
- To return to the e-Manual main menu, press the E-MANUAL button on the remote.
Screen Display
Currently
displayed video, TV
Programme, etc.
The category list. Press
l
or
r
button to
select the category you want.
Displays the sub-menu list. Use the
arrow buttons on your remote to move
the cursor. Press ENTER
E
button to
select the sub-menu you want.
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Options
Changing the Preset Sound Mode
Adjusting Sound Settings
Basic Features
}
Index
E
Enter
e
Exit
Operation Buttons
}
Index: Displays the index screen.
- Index available depending on the language.
E
Enter: Selects a category or sub-menu.
e
Exit: Exit the e-Manual.
<Viewing the Contents>
a
Try now: Displays the OSD menu that corresponds to the topic. To return to the e-Manual screen, press the E-MANUAL
button.
b
Home: Moves to the e-Manual home screen.
L
Page: Moves to previous or next page.
{
Zoom: Magnifies a screen.
- Press the
{
(Zoom) button to magnify the screen. You can scroll through the magnified screen by using the
u
or
d
buttons. To return to the screen to normal size, press the RETURN button.
English
English - 9
UK5100B_BT_BN68-07346W-03_L08.indb 9 2016-07-11 �� 11:24:29
How to toggle between an e-Manual topic and the corresponding OSD menu(s).
- This function is not enabled in some menus.
- You cannot use the Try now function if the menu is not activated.
Method 1 Method 2
1. If you want to use the menu that corresponds to an
e-Manual topic, press the red button to select Try now.
2. To return to the e-Manual screen, press the E-MANUAL
button.
1. Press the ENTER
E
button when a topic is displayed.
Are you sure? appears. Select Yes, and then press the
ENTER
E
button. The OSD window appears.
2. To return to the e-Manual screen, press the
E-MANUAL button.
How to search for a topic on the index page
- This function may not be supported depending on the language.
1. If you want to search a keyword, press the blue button to select Index.
2. Press the
l
or
r
button to select a character order you want.
3. Press the
u
or
d
button to select a keyword you want to see, and then press the ENTER
E
button.
4. You can view the corresponding e-Manual instruction screen.
- To close the Index screen, press the RETURN button.
Initial Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Setup is available only when the source is set to TV.
- If you connect any device to HDMI IN 1(STB) before starting the installation, Channel Source will be changed to Set-top
box automatically. If you do not want to select Set-top box, please select Aerial.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the Change PIN function.
You should do Setup (MENUSystem) again at home even though you did in shop already.
- If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the
PIN to “0-0-0-0”: MUTE824POWER (on)
English - 10
UK5100B_BT_BN68-07346W-03_L08.indb 10 2016-07-11 �� 11:24:30
Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be
displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be
displayed.
- You can change Teletext pages by pressing the numeric buttons on the remote control.
1
0
(mode): Selects the Teletext mode (LIST/FLOF). If pressed during LIST
mode, switches the mode to List save mode. In List save mode, you can save a
Teletext page into a list using the
8
(store) button.
2
/
(Full TTX/Double TTX/mix/off): Activates the Teletext mode for the
current channel. Press the button twice to overlap the Teletext mode with the
current broadcasting screen. Press it one more time to exit teletext.
3
1
(sub-page): Displays the available sub-page.
4
8
(store): Stores the Teletext pages.
5
6
(index): Displays the index (contents) page at any time while you are
viewing Teletext.
6
4
(size): Displays the teletext on the upper half of the screen in double-size.
To move the text to the lower half of the screen, press it again. For normal
display, press it once again.
7
9
(hold): Holds the display at the current page, in the case that there are
several secondary pages that follow automatically. To undo, press it again.
8
2
(page up): Displays the next Teletext page.
9
3
(page down): Displays the previous Teletext page.
0
5
(reveal): Displays the hidden text (answers to quiz games, for example). To
display the normal screen, press it again.
!
7
(cancel): Shrinks the Teletext display to overlap with the current broadcast.
@
Colour buttons (red, green, yellow, blue): If the FASTEXT system is used
by the broadcasting company, the different topics on a Teletext page are
colour-coded and can be selected by pressing the coloured buttons. Press the
colour corresponding to the topic of your choice. A new colour coded page is
displayed. Items can be selected in the same way. To display the previous or
next page, press the corresponding coloured button.
The Teletext pages are organized according to six categories
Part Contents
A
E
F
B C D
A Selected page number.
B Broadcasting channel identity.
C Current page number or search indications.
D Date and time.
E Text.
F Status information. FASTEXT information.
English
English - 11
UK5100B_BT_BN68-07346W-03_L08.indb 11 2016-07-11 �� 11:24:30
Troubleshooting and Maintenance
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips
apply, visit “www.samsung.com”, then click on Support, or call Samsung customer service centre.
Picture Quality

First of all, please perform the Picture Test and confirm that your TV is properly displaying test image. (go to MENU -
Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the poor picture may caused by the source
or signal.
The TV image does not look as good as it did in the store.

If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD
(high definition) picture quality.

Cable/Satellite subscribers: Try digital stations from the channel line up.

Aerial connection: Try HD stations after performing Auto tuning.

Many HD channels are up scaled from SD (Standard Definition) contents.

Adjust the Cable/Set top box video output resolution to 1080i or 720p.

Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.
The picture is distorted: macro block, small block, dots, pixelization error.

Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
movies.

Low signal level or bad quality can cause picture distortion. This is not a TV issue.

Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.

If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.

Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)

Adjust Energy Saving option in the TV menu. (go to MENU - System - Eco Solution - Energy Saving)

Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture)
English - 12
UK5100B_BT_BN68-07346W-03_L08.indb 12 2016-07-11 �� 11:24:31
There is a dotted line on the edge of the screen.

If the picture size is set to Screen Fit, change it to .

Change cable/satellite box resolution.
The picture is black and white.

If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the
TV.
When changing channels, the picture freezes or is distorted or delayed.

If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes.

Set the output resolution of the cable box to 1080i or 720p.
Sound Quality

First of all, please perform the Sound Test to confirm that your TV audio is properly operating. (go to MENU - Support -
Self Diagnosis - Sound Test)

If the audio is ok, the sound problem may be caused by the source or signal.
There is no sound or the sound is too low at maximum volume.

Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
The picture is good but there is no sound.

Set the Speaker Select option to TV Speaker in the sound menu.

If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.

If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).

If you are using a DVI to HDMI cable, a separate audio cable is required.

Reboot the connected device by reconnecting the device’s power cable.
The speakers are making an inappropriate noise.

Check the cable connections. Make sure a video cable is not connected to an audio input.

For aerial or cable connections, check the signal strength. Low signal level may cause sound distortion.
No Picture, No Video
The TV will not turn on.
- Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
- Make sure the wall outlet is working.
- Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The
remote control does not work” below.
The TV turns off automatically.
- Ensure the Sleep Timer is set to Off in the Time menu.
- If your PC is connected to the TV, check your PC power settings.
- Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
- No Signal Power Off turns off the TV if no signal has been received by the TV for a specified period time. Auto Power Off
turns off the TV if there has been no user input in four hours.
English
English - 13
UK5100B_BT_BN68-07346W-03_L08.indb 13 2016-07-11 �� 11:24:31
There is no picture/video.

Check cable connections (remove and reconnect all cables connected to the TV and external devices).

Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

Make sure your connected devices are powered on.

Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.

Reboot the connected device by reconnecting the device’s power cable.
Aerial (Air/Cable) Connection (Cable: depending on the country)
The TV is not receiving all channels.

Make sure the Aerial cable is connected securely.

Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System - Setup (Initial setup)
and wait for all available channels to be stored.

Verify the Aerial is positioned correctly.
The picture is distorted: macro block, small block, dots, pixelization error.

Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
movies.

A low signal can cause picture distortion. This is not a TV issue.
Others
The picture will not display in full screen.



Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.

Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
- Replace the remote control batteries with the poles (+/–) in the right direction.
- Clean the sensor’s transmission window on the remote.
- Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume.

Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
SAMSUNG TV code.
A “Mode Not Supported” message appears.

Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly.
There is a plastic smell from the TV.

This smell is normal and will dissipate over time.
English - 14
UK5100B_BT_BN68-07346W-03_L08.indb 14 2016-07-11 �� 11:24:31
The TV Signal Information is unavailable in the Self Diagnosis Test menu.

This function is only available with digital channels from an Aerial / RF / Coax connection.
TV is tilted to the right or left side.

Remove the stand base from the TV and reassemble it.
There are difficulties assembling the stand base.

Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please use a magnetised screw
driver.
The Broadcasting menu is grey out (unavailable).

The Broadcasting menu is only available when the TV source is selected.
Your settings are lost after 5 minutes or every time the TV is turned off.

If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to change the
settings from Store Demo mode to Home Use, press the SOURCE button to select TV mode, and go to MENU - Support -
Use Mode.
You have intermittent loss of audio or video.

Check the cable connections and reconnect them.

Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for
long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look closely at the edge of the frame of the TV.

This is part of the product’s design and is not a defect.
The PIP menu is not available.

PIP functionality is only available when you are using a HDMI or components source.
You turned the TV off 45 minutes ago, and it turned on again.

It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your
watching TV.
There are recurrent picture/sound issues.

Check and change the signal/source.
A reaction may occur between the rubber cushion pads on the base stand and the top finish of some
furniture.

To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
The message “This file may not be playable properly.” appears.

This may appear because of high bit rate of content. Content generally will play but could experience some playability
issue.

by USB.
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there
may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Some functions and pictures shown in this manual are available on specific models only.
English
English - 15
UK5100B_BT_BN68-07346W-03_L08.indb 15 2016-07-11 �� 11:24:31
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock or news

still pictures, it can cause image burn-in on the LED screen and affect image quality. To reduce the risk of this adverse effect,
please follow the recommendations below:

Avoid displaying the still image for long periods.

Always try to display any image in full screen. Use the picture format menu of the TV set for the best possible match.

Reduce brightness and contrast to avoid the appearance of after-images.

Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.
Caring for the TV

If a sticker was attached to the TV screen, some debris can remain
after you remove the sticker. Please clean the debris off before
watching TV.

The exterior and screen of the TV can get scratched during cleaning.
Be sure to wipe the exterior and screen carefully using a soft cloth to
prevent scratches.

Do not spray water or any liquid directly onto the TV. Any liquid that
goes into the product may cause a failure, fire, or electric shock.

Turn off the TV, then gently wipe away smudges and fingerprints on
the screen with a micro-fiber cloth. Clean the body of the TV with
a soft cloth dampened with a small amount of water. Do not use
flammable liquids (benzene, thinners, etc.) or a cleaning agent. For
stubborn smudges, spray a small amount of screen cleaner on the
cloth.
Recommendation - EU Only
Hereby, Samsung Electronics, declares that this TV is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support
and enter the model name.
This equipment may be operated in all EU countries.
English - 16
UK5100B_BT_BN68-07346W-03_L08.indb 16 2016-07-11 �� 11:24:32
TV Installation
Mounting the TV on a wall
If you mount this product on a wall, follow the instructions exactly as recommended by the manufacturer.
Unless it is correctly mounted, the product may slide or fall, thus causing serious injury to a child or adult
and serious damage to the product.
You can mount the TV on the wall using a wall mount kit (sold separately).
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you choose to install
the wall mount on your own.
TV
Wall mount
Bracket
C
VESA wall mount kit notes and specifications
You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other
than plaster board, contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
Standard dimensions for wall mount kits are shown in the table below.
If you are installing a third-party wall mount, note that the length of the screws you can use to attach the TV to the wall
mount is shown in column C in the table below.
TV size in inches
VESA screw hole specs(A * B)
in millimetres
C (mm) Standard Screw Quantity
32 100 x 100
19 – 20
M4
4
40 ~ 55 200 x 200 M8
English
English - 17
UK5100B_BT_BN68-07346W-03_L08.indb 17 2016-07-11 �� 11:24:33
Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric
shock.
Do not use screws that are longer than the standard length or do not comply with VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.

For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws
may differ depending on the wall mount specifications.

Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount
is used or the consumer fails to follow the product installation instructions.

Do not mount the TV at more than a 15 degree tilt.

Always have two people mount the TV onto a wall.
Providing proper ventilation for your TV
When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls, cabinet sides, etc.)
to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product caused
by an increase in its internal temperature.
When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung
Electronics only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury
caused by the product falling.
Installation with a stand Installation with a wall mount
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
English - 18
UK5100B_BT_BN68-07346W-03_L08.indb 18 2016-07-11 �� 11:24:33
Attaching the TV to the Stand
Make sure you have all the accessories shown, and that you assemble the stand following the provided assembly
instructions.
Safety Precaution: Securing the TV to the wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In
particular, ensure your children do not hang on or destabilise the TV. This action
may cause the TV to tip over, causing serious injuries or death. Follow all safety
precautions provided in the Safety Flyer included with your TV. For added stability
and safety, you can purchase and install the anti-fall device as described below.
WARNING: Never place a television set in an unstable location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions
such as

Using cabinets or stands recommended by the manufacturer of the television set.

Only using furniture that can safely support the television set.

Ensuring the television set is not overhanging the edge of the supporting furniture.

Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable support.

Not placing the television set on cloth or other materials that may be located between the television set
and supporting furniture.

Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be
applied.
- When you have to relocate or lift the TV for replacement or cleaning, be sure not to pull out the stand.
Preventing the TV from falling
1. Put the screws into one set of brackets, and then firmly fasten them to
the wall. Confirm that the screws are firmly attached to the wall.
- You may need additional material such as an anchor depending on the
type of wall.
2. Put the screws into a second set of brackets, and then fasten the screws
to the TV.
- Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
3. Connect the brackets fixed to the TV and the brackets fixed to the wall
with a durable, heavy-duty string, and then tie the string tightly.
- Install the TV near the wall so that it does not fall backwards.
- Connect the string so that the brackets fixed to the wall are at the
same height as or lower than the brackets fixed to the TV.
English
English - 19
UK5100B_BT_BN68-07346W-03_L08.indb 19 2016-07-11 �� 11:24:33
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the
manual provided with the Kensington Lock for additional information on proper use.
- Please find a “
K
” icon on the rear of the TV. A kensington slot is beside the
K
” icon.
- The position and colour may differ depending on the model.
<Optional>
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
- These are general instructions. For exact instructions, see the User manual supplied with the locking device.
- The locking device has to be purchased separately.
English - 20
UK5100B_BT_BN68-07346W-03_L08.indb 20 2016-07-11 �� 11:24:34
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212

Samsung UE32K5102AK Manual de utilizare

Categorie
Televizoare LCD
Tip
Manual de utilizare
Acest manual este potrivit și pentru