Yamaha M7CL Ghid de instalare

Marca: Yamaha

Model: M7CL

Tip: Ghid de instalare

Acest manual este potrivit și pentru

M7CL Editor Installation Guide 1

M7CL Editor

Installation Guide

ATTENTION

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY

PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS

BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").

BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS

OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS

SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE

SOFTWARE.

1. GRANT OF LICENSE AND COPYRIGHT

Yamaha hereby grants you the right to use one copy of the software program(s) and data ("SOFTWARE") accompanying this Agreement. The

term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or

Yamaha’s licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership

of the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.

• You may use the SOFTWARE on a single computer.

• You may make one copy of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is on media where

such backup copy is permitted. On the backup copy, you must reproduce Yamaha's copyright notice and any other proprietary legends

that were on the original copy of the SOFTWARE.

• You may permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the

recipient reads and agrees to the terms of this Agreement.

2. RESTRICTIONS

• You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE

by any method whatsoever.

• You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the

SOFTWARE.

• You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other

computers.

• You may not use the SOFTWARE to distribute illegal data or data that violates public policy.

• You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.

Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following

restrictions which you must observe.

• Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.

• Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners

in public without permission of the copyright owner.

• The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modiﬁed

without permission of the copyright owner.

3. TERMINATION

This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or

provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such

termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.

4. DISCLAIMER OF WARRANTY ON SOFTWARE

You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided

"AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY

DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.

SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR

REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE

SOFTWARE WILL BE CORRECTED.

SOFTWARE LICENCING AGREEMENT

M7CL Editor Installation Guide 2

5. LIMITATION OF LIABILITY

YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT

SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF

THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in

contract, tort or otherwise) exceed the amount paid for the SOFTWARE.

6. THIRD PARTY SOFTWARE

Third party software and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. If, in the written materials or the electronic data

accompanying the Software, Yamaha identiﬁes any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must

abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY

SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any

way for the THIRD PARTY SOFTWARE or your use thereof.

•Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL

IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.

•Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.

•Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or

consequential damages, expenses, lost proﬁts, lost data or other damages arising out of the use, misuse or inability to use the THIRD

PARTY SOFTWARE.

7. GENERAL

This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conﬂict of laws. Any dispute

or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction ﬁnds any portion of this

Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.

8. COMPLETE AGREEMENT

This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written

materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this

Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of

Yamaha.

• The software and this manual are the exclusive copyrights of Yamaha Corporation.

• Please read carefully the Software Licensing Agreement at the front of this manual before installing the application.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of

the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for

the results of the use of this manual and the software.

• Future upgrades of application and system software and any changes in speciﬁcations and functions will be announced at the following

website. http://www

.yamahaproaudio.com/

• The screen displays as illustrated in this manual are for instructional purposes, and may appear somewhat different from the screens which

appear on your computer.

• The illustrations and LCD screens as shown in this owner’s manual are for instructional purposes only, and may appear somewhat different

from those on your instrument.

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for

your personal use.

• Windows is the registered trademarks of Microsoft

Corporation.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Special Notices

M7CL Editor Installation Guide 3

The M7CL Editor enables you to remotely monitor/control the Yamaha M7CL mixing console, save the parameter

settings on your computer, and also prepare the M7CL settings beforehand by editing the parameters ofﬂine.

For subsequent operations, refer to the PDF manual from the [HELP] menu in each software program.

Minimum System Requirements

The system requirements below may differ slightly depending on the particular operating system.

n The Minimum System Requirements described above are applied to the M7CL Editor version 2.1.0. Keep in mind that the software is

often updated and the system requirements are subject to change. You can check the latest version information of each program and its

system requirements at the following website

http://www.yamahaproaudio.com/

The system requirements may differ slightly depending on the particular computer.

M7CL Editor

Installing the Software

Procedures Windows

Verify that your system meets the operating requirements of each software program. page 3

Install the appropriate driver to your computer. page 4

Install the Studio Manager and each editor. page 5

Start up the Studio Manager, then start up the editor. page 8

Software installation

OS Windows XP Home Edition/XP Professional

Computer 800 MHz or higher; Intel Pentium/Celeron processor

Available Memory 256 MB or more

Hard Disk 30 MB or more

Display 1024 x 768, high color (16 bit) or higher

M7CL Editor Installation Guide 4

Installing softaware

To use M7CL Editor, you’ll need to install the following software programs. Follow the appropriate instructions

below.

• DME-N Network Driver

To operate the M7CL from your computer via Ethernet, you'll need to install the DME-N Network Driver software.

DME-N Network Driver is software that transfers MIDI data back and forth between your computer and the M7CL

via Ethernet cable.

• DME-N Network Driver

• Studio Manager

• M7CL Editor

You can download the latest version of DME-N Network Driver at the following website. For speciﬁc installation instructions,

refer to the installation guide included in the downloaded ﬁle.

http://www

.yamahaproaudio.com/

Ethernet cable

M7CL

Computer

Editor

Ethernet cable

Hub

Crossover cable

Driver

M7CL Editor Installation Guide 5

Studio Manager Installation

Studio Manager is a cross-platform application that enables you to use multiple Editor programs for remotely

controlling Yamaha hardware from your computer, and allows you to save the Editor settings for instant recall.

For speciﬁc instructions on using the software, refer to the PDF manual from the [HELP] menu in the Studio

Manager and each Editor.

M7CL Editor Installation

Follow the instructions below to install the software programs.

1 Extract the data from the downloaded compressed ﬁle and open the “m7cl_edt***_win” folder.

“***” represents the version number.

2 Double-click “setup.exe.”

A setup dialog of M7CL Editor is displayed.

3 Follow the on-screen instructions to install the software.

n For speciﬁc instructions on using the software, refer to the PDF manual from the [HELP] menu in each program.

Uninstall (removing the installed application)

To remove the installed editors and Studio Manager:

Select [START] → [Control Panel] → [Add/Remove Programs] → [Install/Uninstall], then select the application to be

removed and click [Add/Remove…].

Follow the on-screen instructions to uninstall the application.

n The button names or menus may differ depending on the computer OS.

You can download the latest version of Studio Manager at the following website. For speciﬁc installation instructions, refer to

the installation guide included in the downloaded ﬁle.

http://www

.yamahaproaudio.com/

M7CL Editor Installation Guide 6

Overview of Studio Manager and Total Recall

Studio Manager is a cross-platform application that enables you use multiple Editor programs for remotely

controlling Yamaha hardware from your computer, and allows you to save the Editor settings for instant recall.

You can run Studio Manager as a stand-alone application, or as a plug-in within DAW (digital audio workstation)/

sequencer applications that are compatible with Total Recall, such as Cubase SX 3.0.1 or later. In either case, the

basic functionality is the same. For the latest information on compatible DAW applications, refer to the following

website.

http://www.studioconnections.org/

The settings of each editor can be saved and recalled together from Studio Manager or the DAW application. In

other words, you can change the settings of your entire system in a single operation by recalling the settings for

multiple devices from Studio Manager or your DAW application. This capability is referred to as “total recall.”

When you want to save setting ﬁles, you can do this from Studio Manager to recall multiple devices at once, or from

an individual Editor to recall only a speciﬁc device. When you save your settings in your DAW application, the

Studio Manager settings will also be saved together with the DAW application ﬁle, and can also be recalled in the

same way.

Getting Started

M7CL

S90 ES

PM5D

Studio Manager

Open an editor from

Studio Manager

M7CL Editor application

S90 ES Editor application

PM5D Editor application

Open from a

compatible DAW

application

Start up Studio

Manager in

stand-alone form

Synchronize

M7CL Editor Installation Guide 7

Network settings of the M7CL

• When connecting the computer to the M7CL directly.

You can use the following initial settings.

• When you connect the computer to the M7CL via LAN.

Set the appropriate address in accordance with LAN.

Your computer and the M7CL should exist in the same subnet in the same network address.

Network settings of computer

If you are connecting the M7CL to your computer in a one-to-one connection, we recommend that you make the

following settings.

However, it must not conﬂict with the IP address of any other device on the network.

n The M7CL cannot be directly connected if the IP address is assigned automatically.

Please contact your network administrator for further detail.

IP address 192.168.0.128

Gateway address 192.168.0.1

Subnet mask 255.255.255.0

IP address Sets the IP address so that it does not conﬂict with the IP address of any other device on

the network.

Gateway address If you set the IP address, the ﬁrst three numbers are automatically set. Set the last

number of the IP address of the gateway when the gateway exists. Set the vacant

address when the gateway does not exist.You should set the address in the same

subnet as IP address.The address should be set in the same subnet as IP address

within LAN in which the subnet is set.

Subnet mask Use an initial setting of [255.255.255.0] in LAN environment in which the subnet is not

set. In LAN in which the subnet is set, set the address in accordance with the

environment.

IP address 192.168.0.3

Subnet mask 255.255.255.0

Default gateway 192.168.0.1

M7CL Editor Installation Guide 8

Starting and setting up Studio Manager

You’ll need to perform the following setup in order to use the editors in Studio Manager.

1 Start up Studio Manager.

Click the [Start] button, place your mouse cursor over [Programs (All Programs)] → [YAMAHA Studio Manager],

then click [Studio Manager].

2 Set up Studio Manager.

For details, refer to the PDF manual, found in the [Help] menu on the Studio Manager.

3 Start up each editor.

In the Studio Manager window, double-click the icon for each editor.

4 Set up each editor.

For details, refer to the PDF manual, found in the [Help] menu on each editor.

5 Synchronize each editor with your mixing console.

For details, refer to the PDF manual, found in the [Help] menu on each editor.

Studio Manager window

M7CL Editor Installation Guide 9

When controlling the M7CL from your computer via Ethernet, the M7CL does not operate correctly

or no sound is heard.

•Have you installed the latest DME-N Network Driver?

• Is the Ethernet cable connected correctly? ........................................................................................ M7CL Owner’s Manual

• Is the DME-N Network Driver set up appropriately? Did you enter an appropriate IP address?

...................................................................................................................................... DME-N Network Driver Installation Guide

• Is the computer network setup appropriate?

Select → [Start] → [Settings] → [Control Panel] → [Network Connections] → [Local Area Connection] → [Property],

and conﬁrm the network setup. ................................................................................... DME-N Network Driver Installation Guide

• Are the settings of the M7CL and network devices (including hubs) appropriate?

....................................................................................................... M7CL Owner's Manual or Network device's Owner's Manual

•Have you selected an appropriate network ports in the M7CL Editor?................................M7CL Editor Owner's Manual

• In case the ﬁrewall function is enabled for your Windows XP SP2 Installation, an alert message will be displayed

indicating that the program is blocked during ﬁrst start-up of M7CL Editor.

In that case, please select the 'Unblock' option.

• In case the ﬁrewall Anti Virus (security) function is enabled you might experience problems controlling M7CL

console.

In that case, please turn off this ﬁrewall function.

Troubleshooting

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation