Edimax EN-9320SFP+ V2 10 Gigabit Ethernet SFP+ PCIe Network Manual de utilizare
- Tip
- Manual de utilizare
EN-9320SFP+ V2
Quick Installation Guide
05-2022 / v1.0
1
I. Product Information
The EN-9320SFP+ V2 equipped with Marvel AQC100 controller delivers
10Gbps (Max.) data transmission and effectively prevents packet loss.
I-1. Package Contents
I-2. LED Status
I-3. System Requirements*
- Supported Operating System: Windows7/8/8.1/10/11 or Linux
- Empty PCIe 2.0 Slot (x4 or Higher)
*Additional version information may be announced on the EDIMAX website.
Function
LED Status
Definition
SPEED
(Link)
On (Amber)
Link at 10Gbps / 1Gbps
Off
Port disconnected or link fail
Activity
On (Green)
Link at 10Gbps / 1Gbps
Blinking (Green)
Data transmitting
Off
Port disconnected or link fail
LED
LED
QIG
Low Profile Bracket
EN-9320SFP+ V2
2
II. Hardware Installation
1. Turn off your computer, unplug the power, and remove the computer case
panel.
Refer to your computer’s user manual if you are unsure how to
remove the case panel and find the location of an availiable PCIe
slot.
2. Insert the EN-9320SFP+ V2 Network Adapter into an available PCIe slot.
An additioanal Low Profile bracket is also included in the package
contents.
3. Secure the EN-9320SFP+ V2 in place by screwing the metal bay screw, and
turn on the computer.
3
III. Driver Installation
Please follow the instructions below to install the driver.
III-1. Download the Driver
Please access the link below. Search the model no. “EN-9320SFP+ V2” in the
search box. Find the proper driver for your Operation System, click to
download and save it your computer Desktop.
https://www.edimax.com/download
III-2. Unzip the Driver
After you downloaded the proper driver for your Operating System,
please unzip it from your computer Desktop for driver installation.
III-3. Install the Driver
Click on “Marvell_FastLinQ_Edge”, and follow the steps of setup wizard to
complete the driver installation.
4
5
III-4. Confirmation of Driver Installation
To confirm the EN-9320SFP+ V2 is working properly with following steps.
A. Right-click the Windows Start button, and select the “Device
Manager”.
B. Double-click the “Network Adapter” to expend the list of Nework
Adapter.
C. Right-click on the Network adapter and select “Properties”.
EN-9320SFP+ v2 is working properly!!
.
6
IV. More Information
For more information, please visit our website with the following URL or scan
the QR code:
https://www.edimax.com/download
Please search the model no. “EN-9320SFP+ V2” to enter the referred page.
V. Safety Instructions
The following general safety guidelines are provided to help ensure your own
personal safety and protect your product from potential damage. Remember
to consult the product user instructions for more details.
This product is designed for indoor use only.
Static electricity can be harmful to electronic components. Discharge static
electricity from your body (i.e. touching grounded bare metal) before
touching the product.
The device contains no user serviceable parts. Do not attempt to service
the product and never disassemble the product.
Do not spill food or liquid on your product and never push any objects into
the openings of your product.
Do not use this product near water, areas with high humidity, or
condensation.
Keep the product away from radiators and other heat sources.
This device is not designed to be operated by children.
Always unplug the product from mains power before cleaning and use a
dry lint free cloth only.
7
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any warranties,
merchantability, or fitness for any particular purpose. Any software described in this
manual is sold or licensed as is. Should the programs prove defective following their
purchase, the buyer (and not this company, its distributor, or its dealer) assumes the
entire cost of all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right
to revise this publication and to make changes from time to time in the contents hereof
without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from
those shown in this QIG. The software and specifications are subject to change without
notice. Please visit our website www.edimax.com for updates. All brand and product
names mentioned in this manual are trademarks and/or registered trademarks of their
respective holders.
8
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Any changes or modifications not expressly approved by the
party responsible for compliance could void the authority to operate equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special
attention must be paid to the dangers of electric shock and static electricity when working with electrical
equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to
ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI
version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.
EU Countries Not Intended for Use
None
9
EU Declaration of Conformity
English: This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 2014/30/EU.
Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la
directive 2014/30/EU.
Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními
směrnic 2014/30/EU.
Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami
określonymi Dyrektywą UE 2014/30/EU.
Română: Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale
Directivei 2014/30/EU.
Русский: Это оборудование соответствует основным требованиям и положениям Директивы
2014/30/EU.
Magyar: Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek
(2014/30/EU).
Türkçe: Bu cihaz 2014/30/EU. direktifleri zorunlu istekler ve diğer hükümlerle ile uyumludur.
Українська: Обладнання відповідає вимогам і умовам директиви 2014/30/EU.
Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc
2014/30/EU.
Deutsch: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 2014/30/EU.
Español: El presente equipo cumple los requisitos esenciales de la Directiva 2014/30/EU.
Italiano: Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili
della Direttiva 2014/30/EU.
Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
van richtlijn 2014/30/EU.
Português: Este equipamento cumpre os requesitos essênciais da Directiva 2014/30/EU.
Norsk: Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
2014/30/EU.
Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
bestämmelser i direktiv 2014/30/EU.
Dansk: Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante
forordninger i direktiv 2014/30/EU.
suomen kieli: Tämä laite täyttää direktiivien 2014/30/EU. oleelliset vaatimukset ja muut asiaankuuluvat
määräykset.
-----------------------------------------------------------------------------------------------------------------------
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment, or returned to the supplier for disposal.
10
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European R&TTE
directives.
Equipment:
10 Giga SFP+ port PCIE NIC
Model No.:
EN-9320SFP+ V2
The following European standards for essential requirements have been followed:
Directives 2014/30/EU
EMC
:
EN 55032:2015/A11:2020
EN 55035:2017/A11:2020
AS/NZS CISPR 32:2015
Date & Place of Issue: 31/May/2022, Taipei
Signature:
Printed Name:
Hunter Chen
Title:
Director
a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Date & Place of Issue: 31/May/2022, Eindhoven
Signature:
Printed Name:
David Huang
Title:
Director
11
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the United Kingdom
EMC and Safety directives.
Equipment:
10 Giga SFP+ port PCIE NIC
Model No.:
EN-9320SFP+ V2
The following European standards for essential requirements have been followed:
Electromagnetic Compatibility Regulations 2016 (S.I. 2016/1091)
EMC
:
EN 55032:2015/A11:2020
EN 55035:2017/A11:2020
AS/NZS CISPR 32:2015
Date & Place of Issue: 31/May/2022, Taipei
Signature:
Printed Name:
Hunter Chen
Title:
Director
a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Date & Place of Issue: 31/May/2022, Eindhoven
Signature:
Printed Name:
David Huang
Title:
Director
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
