Yamaha BD-940 Manual de utilizare

Categorie
DVD playere
Tip
Manual de utilizare
Software Update for BD-940
Page.1 of 5
June, 2012
Subject: BD-940 Software Update Version 1.17
Yamaha is pleased to offer the following software update to ensure the best
possible performance and latest features for your Yamaha BD-940 Blu-ray Disc
Player.
This software includes improvements of playback stability of certain
Blu-ray/DVD discs
CHECK YOUR UNIT’S SOFTWARE VERSION PRIOR TO THIS UPDATE
The software version consists of 2 letters followed by 7 numbers. Check the 5
numbers to the left. If the 5 numbers are “92204 or higher, you DO NOT
need to perform this update.
How to check your software version:
Press [SETUP] button on the remote controller. Then, select Settings >
Version. Your current software version will appear on TV.
If your version is smaller than 92204, perform the software update. There
are 2 methods you can choose from. Click the one you wish to perform.
Update Disc Method
(Burning update file onto CD-R or CD-RW disc is required)
USB Thumb Drive Method
(Must be able to access the USB port located on the back of the unit)
< IMPORTANT NOTICE >
Do not attempt to update your Yamaha Blu-ray Disc Player using any other data file except
those provided directly from the Yamaha website.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required
to restore proper operation will not be covered under the Yamaha Limited Warranty.
YM9220400 Update unnecessary
Perform update
YM921xxxx
YM920xxxx
YM91xxxxx
YM90xxxxx
Software Update for BD-940
Page.2 of 5
Update Disc Method
STEP1 Preparation of update disc.
Burn the downloaded update file YMBD_117.MVP onto a CD-R or
CD-RW as data disc with ISO9660 format. Make sure the disc is
finalized. This will be your update disc.
STEP2 Power on the Blu-ray Disc Player.
Wait till NO DISC appears.
STEP3 Set the update disc in the Blu-ray Disc Player.
Eject the disc tray and load the update disc.
STEP4 Update will start automatically. Wait till the disc ejects.
Front display will change as follows:
While update is in progress, DO NOT interrupt the power or press any
buttons.
When the update is completed, Blu-ray Disc Player will eject the disc
tray and power itself off automatically.
(Front panel display beneath the opened disc tray will turn off)
In case the update doesnt start, check the troubleshooting section on
the last page.
STEP5 Remove the update disc and power on.
STEP6 Check the updated version.
Using the remote controller, press [SETUP].
Select Settings > Version.
Confirm that the updated version is YM9220400
STEP7 Exit from setup menu.
Press [EXIT] button on the remote controller to exit from setup menu.
Congratulations!
You have completed the software update.
Your Blu-ray Disc Player is now ready for normal use.
Software Update for BD-940
Page.3 of 5
USB Thumb Drive Method
STEP1 Copy the update file to a USB thumb drive.
Using your computer, copy the downloaded update file
YMBD_117.MVP into the root directory of a USB thumb drive that
supports USB Mass Storage Class. (It is recommended to delete all
other files or folders)
STEP2 Power on the Blu-ray Disc Player.
STEP3 Enter Software update.
On the remote controller, press the [SETUP] button.
Then select Settings > Software Update.
If password is set for your Blu-ray Disc Player, enter the 4-digit number
using the 10 keys on the remote controller.
STEP4 Follow the instructions on TV screen.
Insert USB drive to the USB port
located on the rear of this unit.
Software data in the USB drive
will be checked.
USB Port
“BD STORAGE / Service
Software Update for BD-940
Page.4 of 5
STEP5 Start software update
Select Yes and press [ENTER] on the remote controller to start the
update.
While update is in progress, DO NOT interrupt the power or press any
buttons.
When the update is completed, Blu-ray Disc Player will power itself off
automatically. (The front panel display will turn off)
If the update doesnt start, check the troubleshooting section on the
last page.
STEP6 Remove the USB Drive and power on.
STEP7 Check the updated version.
Using the remote controller, press [SETUP].
Select Settings > Version.
Confirm that the updated version is YM9220400
STEP8 Exit from setup menu.
Press [EXIT] button on the remote controller to exit from setup menu.
Congratulations!
You have completed the software update.
Your Blu-ray Disc Player is now ready for normal use.
Software Update for BD-940
Page.5 of 5
Troubleshooting
< Update Disc Method >
Case1: After loading the update disc, the Blu-ray Disc Player doesnt
start the update.
Check if the update disc is finalized.
Check that the downloaded update file YMBD_xxx.MVP is the
only file recorded in the disc.
Make sure the file name of the update file is not renamed.
Burn the downloaded update file again using another disc.
(CD-R is recommended)
Or, try the USB thumb drive method.
Case2: Unintended error occurred during the update
Solution:
The Blu-ray Disc Player will restore original software version.
Retry the procedure from STEP1 again.
Or, check your current software version. In case the software
version in the disc is as same as or older than the current one,
ERROR will be displayed during the update.
< USB Thumb Drive Method >
Case1: Blu-ray Disc Player cannot verify the update file in the USB drive.
Check that the update file is located in the root directory of the
USB drive.
Check that no folders are created in the USB drive.
Check that no files other than the update file YMBD_xxx.MVP is
stored in the USB drive.
Make sure the file name of the update file is not renamed.
Try with another USB drive.
Or, try the update disc method.
Case2: Unintended error occurred during the update.
Solution:
The Blu-ray Disc Player will restore original software version. Retry
the procedure from STEP1 again.
1 / 1

Yamaha BD-940 Manual de utilizare

Categorie
DVD playere
Tip
Manual de utilizare