■16 │ GB│IE SSJBK 300 B2
SAFETY CUT-OUT / RESET FUNCTION
►If the appliance turns itself off, the safety cut-out has tripped. The appliance
switches itself off before the motor can be damaged due to overheating,
e.g. because pieces of food have got stuck and the motor has blocked. The
appliance cannot be switched back on until you reset the safety cut-out.
Proceed as described in section Safety cut-off/reset function to be
able to use the appliance again
NOTE
►If the juice container is full and you want to empty it while juice is still
dripping out of the juice outlet , block it off using the stopper . Open
the stopper again after you have replaced the empty juice container
under the juice outlet .
NOTE
►If the container for fruit pulp and vegetable mash is full and you want to
empty it, stop feeding in ingredients and wait until no more fruit pulp comes
out of the appliance. After emptying, replace the container for fruit pulp and
vegetable mash under the outlet for fruit pulp and vegetable mash .
►If any fruit pulp remains stuck in the outlet for fruit pulp and vegetable
mash , stop the appliance and remove the residue using the handle of
the cleaning brush .
6) Always switch off the appliance as soon as all of the ingredients have been
processed.
CAUTION! MATERIAL DAMAGE!
►To avoid blockage and/or damage to the appliance, clean the juice outlet
and the container for fruit pulp and vegetable mash regularly and after
every use.
Dismantling
If you wish to dismantle the slow juicer, e.g. to clean it, proceed as follows:
1) Pull the plug on the mains cable out of the socket.
2) Close the stopper on the juice outlet so that no remaining juice can
drip out.
3) Turn the housing lid anticlockwise until the marking points towards
the marking on the sieve tray .
4) Remove the housing lid together with the pusher .
5) Carefully lift the sieve tray with the removable sieve frame and the
sieve or the sorbet attachment and the transport screw from the
appliance base .
6) Separate all the components.