![](//vs1.manuzoid.ro/store/data-gzf/ad90d1bc9c92374cc6b4755a3e2ab3b7/2/000150233.htmlex.zip/bg6.jpg)
PSR-E360 Owner’s Manual
6
Battery
• Follow the precautions below. Failure to do so might result in explosion, fire, overheating or battery fluid
leakage.
- Do not tamper with or disassemble batteries.
- Do not dispose of batteries in fire.
- Do not attempt to recharge batteries that are not designed to be charged.
- Keep the batteries separate from metallic objects such as necklaces, hairpins, coins, and keys.
- Use the specified battery type (page 35) only.
- Use new batteries, all of which are the same type, same model, and made by the same manufacturer.
- Always make sure all batteries are inserted in conformity with the +/- polarity markings.
- When the batteries run out, or if the instrument is not to be used for a long time, remove the batteries
from the instrument.
- When using Ni-MH batteries, follow the instructions that came with the batteries. Use only the
specified charger device when charging.
• Keep batteries away from small children who might accidentally swallow them.
• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in contact with
your eyes, mouth, or skin, wash immediately with water and consult a doctor. Battery fluid is corrosive
and may possibly cause loss of sight or chemical burns.
If you notice any abnormality
• When one of the following problems occur, immediately turn off the power switch and disconnect the
electric plug from the outlet. (If you are using batteries, remove all batteries from the instrument.) Then
have the device inspected by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
- If any cracks or breakages exist on the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility
of physical injury to you or others, or damage to the instrument or other
property. These precautions include, but are not limited to, the following:
Power supply/AC adaptor
• Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in
lower sound quality, or possibly cause overheating in the outlet.
• When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the
cord. Pulling by the cord can damage it.
• Remove the electric plug from the outlet when the instrument is not to be used for extended periods of
time, or during electrical storms.
Location
• Do not place the instrument in an unstable position where it might accidentally fall over.
• Before moving the instrument, remove all connected cables, to prevent damage to the cables or injury to
anyone who might trip over them.
• When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble
or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even
when the power switch is turned off, electricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.
• Use only the stand specified for the instrument. When attaching it, use the provided screws only. Failure
to do so could cause damage to the internal components or result in the instrument falling over.
Connections
• Before connecting the instrument to other electronic components, turn off the power for all components.
Before turning the power on or off for all components, set all volume levels to minimum.
• Be sure to set the volumes of all components at their minimum levels and gradually raise the volume
controls while playing the instrument to set the desired listening level.
Handling caution
• Do not insert a finger or hand in any gaps on the instrument.
• Never insert or drop paper, metallic, or other objects into the gaps on the panel or keyboard. This could
cause physical injury to you or others, damage to the instrument or other property, or operational failure.
• Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on
the buttons, switches or connectors.
• Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable
volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing
in the ears, consult a physician.
DMI-7 2/3