EU DECLARATION OF CONFORMITY
According to
The Radio Equipment Directive 2014/53/EU, entering into force 13 June 2016
The RoHS Directive 2011/65/EU, entering into force 2 January 2013
Type of equipment
Welding Power Source
Type designation
Mig 5000i/5000iw WeldCloud from serial number 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud from serial number 626-xxx-xxxx (2016 w/26)
Brand name or trade mark
ESAB
Manufacturer or his authorised representative established within the EEA
Name, address, and telephone No:
ESAB AB
Lindholmsallén 9, Box 8004, SE-402 77 Göteborg, Sweden
Phone: +46 31 50 90 00, Fax: +46 31 50 92 22
The following harmonised standard in force within the EEA has been used in the design:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and
non-radio equipment; Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Additional Information:
Restrictive use, Class A equipment, intended for use in location other than residential
By signing this document, the undersigned declares as manufacturer, or the manufacturer’s
authorised representative established within the EEA, that the equipment in question complies
with the safety requirements stated above.
Date Signature Position
Gothenburg Global Director Equipment
2017-09-27 Stephen Argo
2017
BG
Дата Подпис Длъжност
Gothenburg
Главен директор по
оборудването
2017-09-27 Stephen Argo
2017
ЕС ДЕКЛАРАЦИЯ ЗА СЪОТВЕТСТВИЕ
Съгласно
ДИРЕКТИВА 2014/53/ЕС НА ЕВРОПЕЙСКИЯ ПАРЛАМЕНТ И НА СЪВЕТА от 16 април 2014 година
Директивата за ограничение на опасните вещества (RoHS) 2011/65/ЕС, влязла в сила от 2 януари 2013 г.
Вид оборудване
Заваръчен захранващ източник
Вид предназначение
Mig 5000i/5000iw WeldCloud, от сериен номер 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, от сериен номер 626-xxx-xxxx (2016 w/26)
Търговско наименование или търговска марка
Име, адрес и телефонен номер:
ESAB
Производител или негов упълномощен представител, учреден в рамките на ЕИП
Като подписва настоящия документ, долуподписаният декларира в качеството си на производител или
упълномощен представител на производителя, учреден в рамките на ЕИП, че съответното оборудване
отговаря на посочените по-горе изисквания за безопасност.
Допълнителна информация:
Ограничена употреба, оборудване от клас A, предназначено за употреба на място, различно от жилищно помещение
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Телефон: +46 31 50 90 00, Факс: +46 31 50 92 22
При създаването е използван следният хармонизиран стандарт, който е в сила в рамките на ЕИП:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
CZ
Datum Podpis Pracovní pozice
Gothenburg
Global Director Equipment
2017-09-27 Stephen Argo
2017
EU PROHLÁŠENÍ O SHODĚ
Podle
SMĚRNICE 2014/53/EU EVROPSKÉHO PARLAMENTU A RADY ze dne 16. dubna 2014
Směrnice RoHS 2011/65/EU, která platí od 2. ledna 2013
Typ zařízení
Napájecí zdroj pro svařování
Typové označení
Mig 5000i/5000iw WeldCloud, od sériového čísla 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, od sériového čísla 626-xxx-xxxx (2016 w/26)
Název nebo obchodní značka
Jméno, adresa a telefon:
ESAB
Výrobce nebo autorizovaný zástupce v EHP
Podepsáním tohoto dokumentu podepsaný jako výrobce nebo autorizovaný zástupce výrobce v EHP prohlašuje, že
toto zařízení splňuje výše uvedené bezpečnostní požadavky.
Další informace:
Restriktivní použití, vybavení třídy A, určeno pro používání v jiných než obytných oblastech
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefon: +46 31 50 90 00, Fax: +46 31 50 92 22
Design využívá následující harmonizované standardy platné v rámci EHP:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
DE
Datum Unterschrift Position
Göteborg
Global Director Equipment
2017-09-27 Stephen Argo
2017
EU-KONFORMITÄTSERKLÄRUNG
Gemäß
RICHTLINIE 2014/53/EU DES EUROPÄISCHEN PARLAMENTS UND DES RATES vom 16. April 2014
Der RoHS-Richtlinie 2011/65/EU, in Kraft ab 2. Januar 2013
Ausrüstungstyp
Schweißstromquelle
Typenbezeichnung
Mig 5000i/5000iw WeldCloud, ab Seriennummer 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, ab Seriennummer 626-xxx-xxxx (2016 w/26)
Markenname oder Handelszeichen
Name, Adresse und Telefonnummer:
ESAB
Hersteller oder sein im europäischen Wirtschaftsraum zuständiger Vertreter mit entsprechenden Berechtigungen
Durch die Unterzeichnung dieses Dokuments erklärte der Unterzeichnende als Hersteller oder dessen im
europäischen Wirtschaftsraum zuständige Vertreter, dass die betreffende Ausrüstung den oben genannten
Sicherheitsanforderungen entspricht.
Zusatzinformationen:
Restriktive Nutzung, Ausrüstung der Klasse A, für Einsatz außerhalb von Wohnumgebungen vorgesehen
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Göteborg, Schweden
Telefon: +46 31 50 90 00, Fax: +46 31 50 92 22
Die folgende im europäischen Wirtschaftsraum geltende harmonisierte Norm wurde im Design verwendet:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
DK
Dato Underskrift Stilling
Göteborg
Global Director Equipment
2017-09-27 Stephen Argo
2017
EU-OVERENSSTEMMELSESERKLÆRING
Ifølge
EUROPA-PARLAMENTETS OG RÅDETS DIREKTIV 2014/53/EU af 16. april 2014
RoHS-direktivet 2011/65/EU, der trådte i kraft 2. januar 2013
Type af udstyr
Svejsestrømkilde
Typebetegnelse
Mig 5000i/5000iw WeldCloud, fra serienummer 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, fra serienummer 626-xxx-xxxx (2016 w/26)
Brandnavn eller varemærke
Navn, adresse og telefonnr.:
ESAB
Fabrikanten eller dennes etablerede, bemyndigede repræsentant i EØS
Ved underskrift af nærværende dokument erklærer undertegnede som fabrikant eller dennes etablerede
repræsentant inden for EØS, at udstyret opfylder de sikkerhedskrav, der er angivet ovenfor.
Yderligere oplysninger:
Begrænset anvendelse, klasse A-udstyr, ikke beregnet til brug i boligområder
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Göteborg, Sweden
Tlf.: +46 31 50 90 00, Fax: +46 31 50 92 22
Følgende harmoniserede standarder, der er i kraft inden for EØS, er blevet anvendt i designet:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EE
Kuupäev Allkiri Ametikoht
Göteborg
Global Director Equipment
2017-09-27 Stephen Argo
2017
EL VASTAVUSDEKLARATSIOON
vastavalt
EUROOPA PARLAMENDI JA NÕUKOGU DIREKTIIV 2014/53/EL, 16. aprill 2014,
RoHS-direktiivile 2011/65/EL, mis jõustus 2. jaanuaril 2013;
Seadme tüüp
Keevitusvooluallikas
Tüübitähis
Mig 5000i/5000iw WeldCloud, alates seerianumbrist 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, alates seerianumbrist 626-xxx-xxxx (2016 w/26)
Tootenimi või kaubamärk
Nimi, aadress ja telefoninumber:
ESAB
Tootja või tema EMÜ-s tegutsev volitatud esindaja
Käesoleva dokumendi allkirjastamisega kinnitab allakirjutanu tootjana või tootja EMÜ-s tegutsev volitatud esindaja,
et kõnealused seadmed vastavad eespool esitatud ohutusnõuetele.
Lisateave:
Piiratud kasutamine, A-klassi seade, ette nähtud kasutamiseks mujal kui eluhoonetes
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Göteborg, Sweden
Telefon: +46 31 50 90 00, Faks: +46 31 50 92 22
Toote väljatöötamisel on järgitud järgmisi EMÜ-s kehtivaid ühtlustatud standardeid:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
ES
Fecha Firma Cargo
Gotemburgo
Director mundial de equipos
2017-09-27 Stephen Argo
2017
DECLARACIÓN DE CONFORMIDAD UE
Conforme a
DIRECTIVA 2014/53/UE DEL PARLAMENTO EUROPEO Y DEL CONSEJO de 16 de abril de 2014
La Directiva sobre restricciones a la utilización de determinadas sustancias peligrosas en aparatos eléctricos y electrónicos
(RoHS) 2011/65/UE, con entrada en vigor el 2 de enero de 2013
Tipo de equipo
Fuente de corriente para soldadura
Tipo de designación
Mig 5000i/5000iw WeldCloud, desde el número de serie 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, desde el número de serie 626-xxx-xxxx (2016 w/26)
Nombre de marca o marca comercial
Nombre, dirección y n.º de teléfono:
ESAB
Fabricante o su representante autorizado establecido en la EEA
Mediante la firma de este documento, el abajo firmante declara como fabricante, o representante autorizado del
fabricante establecido en la EEA, que el equipo en cuestión cumple con las normas de seguridad arriba
mencionadas.
Información adicional:
Uso restrictivo, equipo Clase A, destinado a uso en ubicaciones no residenciales
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Gotemburgo, Suecia
Teléfono: +46 31 50 90 00, Fax: +46 31 50 92 22
Las siguientes normas armonizadas en vigor en la EEA se han aplicado en el diseño:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
FI
Päivämäärä Allekirjoitus Asema
Göteborg
Global Director Equipment
2017-09-27 Stephen Argo
2017
EU-VAATIMUSTENMUKAISUUSVAKUUTUS
Seuraavien direktiivien mukaisesti
EUROOPAN PARLAMENTIN JA NEUVOSTON DIREKTIIVI 2014/53/EU, annettu 16 päivänä huhtikuuta 2014
RoHS-direktiivi 2011/65/EU, joka tulee voimaan 2.1.2013
Laitteistotyyppi
Hitsausvirtalähde
Tyyppimerkintä
Mig 5000i/5000iw WeldCloud, sarjanumerosta 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, sarjanumerosta 626-xxx-xxxx (2016 w/26)
Tuotenimi tai tavaramerkki
Nimi, osoite ja puhelinnumero
ESAB
Valmistaja tai hänen valtuutettu edustajansa Euroopan talousalueella
Allekirjoittamalla tämän asiakirjan Euroopan talousalueella toimiva valmistaja tai valmistajan valtuuttama edustaja
vakuuttaa, että kyseessä oleva laitteisto noudattaa edellä mainittuja turvallisuusvaatimuksia.
Lisätietoja:
Luokan A laitteistoa koskee rajoitettu käyttö. Laitteistoa ei ole tarkoitettu käytettäväksi kotitaloustiloissa.
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Göteborg, Sweden
Puhelinnumero: +46 31 50 90 00, Faksinumero: +46 31 50 92 22
Seuraavaa Euroopan talousalueella voimassa olevaa harmonisoitua standardia on noudatettu laitteen
suunnittelussa:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
FR
Date Signature Poste
Göteborg
Global Director Equipment
2017-09-27 Stephen Argo
2017
DÉCLARATION DE CONFORMITÉ EUROPÉENNE
Conformément à
DIRECTIVE 2014/53/UE DU PARLEMENT EUROPÉEN ET DU CONSEIL du 16 avril 2014
La directive RoHS 2011/65/EU, qui est entrée en vigueur le 2 janvier 2013
Type d'appareil
Générateur de soudage
Dénomination générique
Mig 5000i/5000iw WeldCloud, à partir du numéro de série 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, à partir du numéro de série 626-xxx-xxxx (2016 w/26)
Nom commercial ou marque
Nom, adresse et n° de téléphone :
ESAB
Le fabricant ou son mandataire établi au sein de l'EEA
En signant ce document, le signataire déclare qu'en tant que fabricant, ou représentant autorisé par le fabricant
établi au sein de l'EEA, l'équipement en question est conforme aux exigences de sécurité mentionnées ci-dessus.
Informations supplémentaires :
Utilisation restrictive, équipement de classe A, prévu pour un usage autre que résidentiel
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Tél.: +46 31 50 90 00, Fax: +46 31 50 92 22
La norme harmonisée suivante, en vigueur au sein de l'EEA, a été utilisée lors de la conception :
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
GR
Ημερομηνία Υπογραφή Θέση
Gothenburg
Γενικός Διευθυντής Εξοπλισμού
2017-09-27 Stephen Argo
2017
ΔΗΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ ΕΕ
Σύμφωνα με
ΟΔΗΓΊΑ 2014/53/ΕΕ ΤΟΥ ΕΥΡΩΠΑΪΚΟΫ ΚΟΙΝΟΒΟΥΛΊΟΥ ΚΑΙ ΤΟΥ ΣΥΜΒΟΥΛΊΟΥ της 16ης Απριλίου 2014
Την οδηγία για τον περιορισμό στη χρήση ορισμένων επικίνδυνων ουσιών στα είδη ηλεκτρικού και ηλεκτρονικού εξοπλισμού
(RoHS) 2011/65/ΕΕ, που τέθηκε σε ισχύ στις 2 Ιανουαρίου 2013
Τύπος εξοπλισμού
Πηγή ρεύματος συγκόλλησης
Χαρακτηρισμός τύπου
Mig 5000i/5000iw WeldCloud, από τον αριθμό σειράς 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, από τον αριθμό σειράς 626-xxx-xxxx (2016 w/26)
Εμπορική ονομασία ή εμπορικό σήμα
Όνομα, διεύθυνση και αρ. τηλεφώνου:
ESAB
Κατασκευαστής ή εξουσιοδοτημένος αντιπρόσωπος εγκατεστημένος εντός του ΕΟΧ
Με την υπογραφή του παρόντος εγγράφου, ο υπογεγραμμένος δηλώνει ως κατασκευαστής ή ως ο
εξουσιοδοτημένος αντιπρόσωπος του κατασκευαστή, που είναι εγκατεστημένος εντός του ΕΟΧ, ότι ο εν λόγω
εξοπλισμός συμμορφώνεται με τις απαιτήσεις ασφαλείας που αναφέρονται ανωτέρω.
Πρόσθετες πληροφορίες:
Περιορισμένη χρήση, εξοπλισμός κλάσης Α, προορίζεται για χρήση σε περιοχές εκτός των οικιστικών
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Τηλέφωνο: +46 31 50 90 00, Φαξ: +46 31 50 92 22
Το ακόλουθο εναρμονισμένο πρότυπο που ισχύει εντός του ΕΟΧ έχει χρησιμοποιηθεί στο σχεδιασμό των
παρακάτω:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
HR
Datum Potpis Položaj
Gothenburg
Globalni direktor opreme
2017-09-27 Stephen Argo
2017
EU izjava o sukladnosti
U skladu s
DIREKTIVA 2014/53/EU EUROPSKOG PARLAMENTA I VIJEĆA od 16. travnja 2014.
RoHS direktivom 2011/65/EU, koja je stupila na snagu 2. siječnja 2013.
Vrsta opreme
Izvor napajanja za zavarivanje
Oznaka tipa
Mig 5000i/5000iw WeldCloud, od serijskog broja 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, od serijskog broja 626-xxx-xxxx (2016 w/26)
Naziv marke ili zaštitni znak
Naziv, adresa i telefonski broj:
ESAB
Proizvođač ili njegov ovlašteni predstavnik koji posluje u Europskom gospodarskom prostoru (EEA)
Potpisivanjem ovog dokumenta niže potpisani izjavljuje da kao proizvođač ili ovlašteni predstavnik proizvođača, koji
posluje u Europskom gospodarskom prostoru (EEA) da je navedena oprema u skladu s gore navedenim
sigurnosnim odredbama.
Dodatne informacije:
Ograničena upotreba, oprema klase A, namijenjena za upotrebu van prostora stanovanja
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefon: +46 31 50 90 00, Fax: +46, 584, 411, 924
U dizajnu je korišten sljedeći harmonizirani standard koji je na snazi u Europskom gospodarskom prostoru (EEA):
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
HU
Kelt Aláírás Beosztás
Göteborg
Globális igazgató, készülékek
2017-09-27 Stephen Argo
2017
EURÓPAI UNIÓS MEGFELELŐSÉGI NYILATKOZAT
Az alábbiak szerint:
AZ EURÓPAI PARLAMENT ÉS A TANÁCS 2014/53/EU IRÁNYELVE (2014. április 16.)
A veszélyes anyagokra vonatkozó 2011/65/EU irányelv; hatályba lépés: 2013. január 2.
A készülék típusa
Hegesztő áramforrás
Típusmegjelölés
Mig 5000i/5000iw WeldCloud, a következő sorozatszámtól: 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, a következő sorozatszámtól: 626-xxx-xxxx (2016 w/26)
Márkanév vagy védjegy
Név, cím és telefonszám:
ESAB
Gyártó, vagy a gyártó az EGT-ben meghatalmazott képviselője
A dokumentum aláírásával az alulíró mint gyártó vagy mint a gyártó EGT-ben meghatalmazott képviselője kijelenti,
hogy a vonatkozó készülék megfelel a fent meghatározott biztonsági követelményeknek.
További információk:
Korlátozott használat, A. osztályú készülék, lakókörnyezetben nem használható
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallén 9, Box 8004, SE-402 77 Göteborg, Sweden
Telefon: +46 31 50 90 00, Fax: +46 31 50 92 22
A tervezés során a következő EGT-ben hatályos harmonizált szabványt használták:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
IT
Data Firma Qualifica
Gothenburg
Global Director Equipment
2017-09-27 Stephen Argo
2017
DICHIARAZIONE DI CONFORMITÀ UE
Conformità a
DIRETTIVA 2014/53/UE DEL PARLAMENTO EUROPEO E DEL CONSIGLIO del 16 aprile 2014
Direttiva RoHS 2011/65/UE, in vigore dal 2 gennaio 2013
Tipo di attrezzatura
Generatore di saldatura
Denominazione tipo
Mig 5000i/5000iw WeldCloud, dal numero di serie 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, dal numero di serie 626-xxx-xxxx (2016 w/26)
Nome del marchio o marchio commerciale
Nome, indirizzo e n. di telefono:
ESAB
Il produttore o il suo rappresentante autorizzato con sede nello Spazio economico europeo (EEA, European
Economic Area)
Firmando il presente documento, il sottoscritto dichiara, in qualità di produttore o di rappresentante autorizzato del
produttore con sede nell'EEA, che l'apparecchio in questione è conforme ai requisiti di sicurezza sopra indicati.
Informazioni aggiuntive:
Restrizioni d'uso, apparecchio di Classe A, destinato per l'uso in luoghi diversi da quelli residenziali
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefono: +46 31 50 90 00, Fax: +46 31 50 92 22
Per il design è stato utilizzato il seguente standard armonizzato in vigore nell'EEA:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
LT
Data Parašas Pareigos
Gothenburg
Įrangos padalinio direktorius
2017-09-27 Stephen Argo
2017
ES ATITIKTIES DEKLARACIJA
Remiantis
EUROPOS PARLAMENTO IR TARYBOS DIREKTYVA 2014/53/ES 2014 m. balandžio 16 d.
Direktyva dėl tam tikrų pavojingų medžiagų naudojimo elektros ir elektroninėje įrangoje apribojimo 2011/65/ES, galiojančia
nuo 2013 m. sausio 2 d.
Įrenginio tipas
Suvirinimo maitinimo šaltinis
Tipo pavadinimas
Mig 5000i/5000iw WeldCloud, nuo serijos Nr. 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, nuo serijos Nr. 626-xxx-xxxx (2016 w/26)
Prekės ženklas
Pavadinimas, adresas ir telefonas:
ESAB
Gamintojas arba jo įgaliotasis atstovas EEE
Pasirašydamas šį dokumentą, pasirašantysis, kaip gamintojas arba gamintojo įgaliotasis atstovas EEE, patvirtina,
kad minima įranga atitinka aukščiau nurodytus saugos reikalavimus.
Papildoma informacija:
Apriboto naudojimo A klasės įranga, skirta naudoti ne gyvenamuosiuose rajonuose
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Tel. +46 31 50 90 00, faks. +46 31 50 92 22
Kuriant įrangą vadovautasi šiuo EEE galiojančiu darniuoju standartu:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
LV
Datums Paraksts Amats
Gotenbērga
Globālais direktors aprīkojuma
jautājumos
2017-09-27 Stephen Argo
2017
ES ATBILSTĪBAS DEKLARĀCIJA
Saskaņā ar tālāk minētajām direktīvām.
EIROPAS PARLAMENTA UN PADOMES DIREKTĪVA 2014/53/ES (2014. gada 16. aprīlis)
RoHS direktīva 2011/65/ES, kas stājas spēkā 2013. gada 2. janvārī.
Aprīkojuma veids
Metināšanas barošanas avots
Veida marķējums
Mig 5000i/5000iw WeldCloud, sākot ar sērijas numuru 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, sākot ar sērijas numuru 626-xxx-xxxx (2016 w/26)
Zīmola nosaukums vai preču zīme
Nosaukums, adrese un tālruņa numurs:
ESAB
Ražotājs vai ražotāja pilnvarotais pārstāvis Eiropas Ekonomikas zonā
Parakstot šo dokumentu, apakšā parakstījusies persona kā ražotājs vai ražotāja pilnvarotais pārstāvis Eiropas
Ekonomikas zonā (EEZ) apliecina, ka attiecīgā iekārta atbilst iepriekš minētajām drošības prasībām.
Papildinformācija
Ierobežota lietojuma A klases iekārta, paredzēta izmantošanai vietās, kas nav dzīvojamās mājas.
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Tālruņa nr.: +46 31 50 90 00, faksa numurs: +46 31 50 92 22
Aprīkojuma izstrādē ir izmantots tālāk minētais saskaņotais standarts, kas ir spēkā EEZ robežās.
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
NL
Datum Handtekening Functie
Gothenburg
Global Director Equipment
2017-09-27 Stephen Argo
2017
EU-CONFORMITEITSVERKLARING
Conform
RICHTLIJN 2014/53/EU VAN HET EUROPEES PARLEMENT EN DE RAAD van 16 april 2014
De RoHS-richtlijn 2011/65/EU die op 2 januari 2013 van kracht is geworden
Type apparatuur
Lasstroombron
Typeaanduiding
Mig 5000i/5000iw WeldCloud, vanaf serienummer 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, vanaf serienummer 626-xxx-xxxx (2016 w/26)
Merknaam of handelsmerk
Naam, adres en telefoonnummer:
ESAB
Fabrikant of zijn gemachtigde vertegenwoordiger, gevestigd binnen de EER
Door ondertekening van dit document verklaart ondergetekende als fabrikant of door de fabrikant gemachtigde en in
de EER gevestigde vertegenwoordiger dat de desbetreffende apparatuur voldoet aan de hierboven genoemde
veiligheidseisen.
Aanvullende informatie:
Beperkt gebruik, apparatuur van klasse A voor gebruik in andere locaties dan woonomgevingen
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefoonnummer: +46 31 50 90 00, Fax: +46 31 50 92 22
De onderstaande in de EER van kracht zijnde geharmoniseerde norm is toegepast bij het ontwerp:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
NO
Dato Signatur Stilling
Göteborg
Global Director Equipment
2017-09-27 Stephen Argo
2017
EU-SAMSVARSERKLÆRING
I henhold til
Radioutstyrsdirektivet 2014/53/EU, som trer i kraft 13. juni 2016
RoHS-direktivet 2011/65/EU, som trer i kraft 2. januar 2013
Utstyrstype
Strømkilde til sveising
Typebetegnelse
Mig 5000i/5000iw WeldCloud, fra serienummer 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, fra serienummer 626-xxx-xxxx (2016 w/26)
Merkenavn eller varemerke
Navn, adresse og telefonnr.:
ESAB
Produsent eller dennes autoriserte representant etablert innen EØS
Ved å signere dette dokumentet erklærer undertegnede som produsent, eller produsentens autoriserte representant
etablert innen EØS, at det aktuelle utstyret overholder sikkerhetskravene oppgitt ovenfor.
Ytterligere informasjon:
Restriktiv bruk, klasse A-utstyr, beregnet for bruk på steder som ikke er boliger
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Göteborg, Sweden
Telefon: +46 31 50 90 00, Faks: +46 31 50 92 22
Den følgende harmoniserte standarden i kraft innen EØS er brukt i designen:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
PL
Data Podpis Stanowisko
Gothenburg
Dyrektor Globalny ds. Sprzętu
2017-09-27 Stephen Argo
2017
DEKLARACJA ZGODNOŚCI UE
zgodna z
DYREKTYWA PARLAMENTU EUROPEJSKIEGO I RADY 2014/53/UE z dnia 16 kwietnia 2014 r.
Dyrektywa RoHS 2011/65/WE, wchodząca w życie 2 stycznia 2013 roku
Typ sprzętu
Źródło prądu spawania
Oznaczenie typu
Mig 5000i/5000iw WeldCloud, od numeru seryjnego 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, od numeru seryjnego 626-xxx-xxxx (2016 w/26)
Nazwa marki lub znak towarowy
Nazwa, adres i numer telefonu:
ESAB
Producent lub jego upoważniony przedstawiciel z siedzibą w EOG
Podpisując ten dokument, niżej podpisany jako producent lub jego upoważniony przedstawiciel z siedzibą w EOG
oświadcza, że powyższe urządzenia spełniają określone wyżej wymogi bezpieczeństwa.
Informacje dodatkowe:
Ograniczone zastosowanie, urządzenia klasy A, przeznaczone do użytku w obiektach innych niż mieszkalne
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefon: +46 31 50 90 00, faks: +46 31 50 92 22
Następująca norma zharmonizowana obowiązująca w EOG obowiązuje w wersji:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
PT
Data Assinatura Função
Gothenburg
Diretor global de equipamento
2017-09-27 Stephen Argo
2017
DECLARAÇÃO DE CONFORMIDADE UE
De acordo com
DIRETIVA 2014/53/UE DO PARLAMENTO EUROPEU E DO CONSELHO de 16 de abril de 2014
a diretiva RoHS 2011/65/UE, com entrada em vigor a 2 de janeiro de 2013
Tipo de equipamento
Fonte de alimentação de soldadura
Designação do tipo
Mig 5000i/5000iw WeldCloud, do número de série 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, do número de série 626-xxx-xxxx (2016 w/26)
Marca ou marca comercial
Nome, endereço e n.º de telefone:
ESAB
Fabricante ou respetivo representante autorizado estabelecido no EEE
Ao assinar o presente documento, o assinante declara, enquanto fabricante ou representante autorizado
estabelecido no EEE, que o equipamento em questão se encontra em conformidade com os requisitos de segurança
supramencionados.
Informação adicional:
Utilização limitada, equipamento de classe A, destinado a utilização em locais não residenciais
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefone: +46 31 50 90 00, Fax: +46 31 50 92 22
A seguinte norma harmonizada, em vigor no EEE, foi utilizada no design:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
RO
Data Semnătura Funcţia
Göteborg
Director echipamente globale
2017-09-27 Stephen Argo
2017
DECLARAŢIE DE CONFORMITATE UE
În conformitate cu
DIRECTIVA 2014/53/UE A PARLAMENTULUI EUROPEAN ȘI A CONSILIULUI din 16 aprilie 2014
Directiva 2011/65/UE privind restricţiile de utilizare a anumitor substanţe periculoase în echipamentele electrice şi electronice,
în vigoare de la 2 ianuarie 2013
Tipul echipamentului
Sursă de alimentare pentru sudură
Denumirea echipamentului
Mig 5000i/5000iw WeldCloud, de la numărul de serie 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, de la numărul de serie 626-xxx-xxxx (2016 w/26)
Numele mărcii sau denumirea comercială
Numele, adresa şi nr. de telefon:
ESAB
Producătorul sau reprezentantul autorizat al acestuia cu sediu în ZEE
Prin semnarea acestui document, subsemnatul, în calitate de producător sau de reprezentant autorizat al
producătorului cu sediu în ZEE, declară că echipamentul în cauză respectă cerinţele de siguranţă menţionate mai
sus.
Informaţii suplimentare:
Echipament din clasa A, cu utilizare limitată, destinat utilizării în alte locaţii decât cele rezidenţiale
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefon: +46 31 50 90 00, Fax: +46 31 50 92 22
Următorul standard armonizat, în vigoare în cadrul ZEE, a fost utilizat pentru proiectare:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
ESAB Mig U5000i/5000iw WeldCloud™ Declaratie de conformitate
- Tip
- Declaratie de conformitate
- Acest manual este potrivit și pentru
Lucrări conexe
-
ESAB Mig 5000i Declaratie de conformitate
-
ESAB Mig U5000i Declaratie de conformitate
-
ESAB Mig U5000i/U5000iw Declaratie de conformitate
-
ESAB WeldCloud™ Mobile Declaratie de conformitate
-
ESAB Retrofit Mig 4004i WeldCloud™ Declaratie de conformitate
-
ESAB Mig 4004i Pulse WeldCloud™ Declaratie de conformitate
-