Yamaha HTR-5063 Ghid de referință

Categorie
Receptoare AV
Tip
Ghid de referință
PUSH
Ex. Ex.
- 1 -
English
Quick Reference Guide
Preparing the remote control
Accessories
Items necessary for connection
The following accessories are supplied with this product.
Speakers
External components
Remote control
Front speaker
Ex. Ex.
Batteries (2) (AAA, R03,
UM-4)
Center speaker
AM loop antenna
Surround speaker and
Surround back speaker
Indoor FM antenna* VIDEO AUX input cover
Active subwoofer
1
2
2
3
3
YPAO microphone
within 6 m
(20 ft)
1
Take off the battery compartment cover.
2
Insert the two supplied AAA batteries
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
Be sure to aim the remote control directly at the
remote control sensor on this unit during operation.
TV
Cable
Cables for connecting external components
(may differ depending on the components you are connecting)
Speaker cables
(a quantity to match the number of speakers you are connecting)
Audio pin cable
(for subwoofer)
Playback device such as BD
(Blu-ray Disc)/DVD players
Use speakers with an impedance of at least 6 Ω.
If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
Prepare at least two speakers (for front). The priority of the other speakers is as follows:
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker (s)
* The con guration of the supplied FM antenna will differ depending on
the country or region where the unit is being used.
Some features are not available in certain regions.
- 2 -
When connection and installation is  nished, set up the speaker parameters
automatically
5
5
.
Connect and install as follows the  rst time you use this unit.
See the following explanations for the connections for each number.
1
1
Connect the speakers
2
2
Connect a TV
3
3
Connect playback device such as BD/DVD players and recorders
4
4
Set the VOLTAGE SELECTOR and connect the AC power cable
(Asia and General models)
Connect the AC power cable
(Other models)
6.1
7.1
7.1
This unit
TV
Subwoofer
1
1
1
1
2
2
3
3
4
4
BD/DVD player
(recorder)
Center speaker
Surround
speaker R
Surround
speaker L
Surround back
speaker L
Surround back
speaker
Surround back
speaker R
Front
speaker R
Front
speaker L
7.1
Connect when using with 7.1-channel
speaker layout. Place the surround back
speakers (L/R) 30 cm or more away from
each other.
6.1
Connect when using with 6.1-channel
speaker layout. Place the surround back
speaker behind the listening position.
- 3 -
1
1
Connect the speakers
CENTER
SURROUND
SINGLE
SURROUND BACK/
BI-AMP
HDMI 3
HDMI 4
FRONT
SUBWOOFER
AUDI O
PRE OUT
OUT
SPEAKERS
6.1
7.1 7.1
Front speaker
R L
Surround back
speaker
R L
Surround
speaker
R L
SubwooferCenter speaker
Connecting speakers
Connecting the banana plug
(Except U.K., Europe, Asia and Korea
models)
Tighten the knob, and then insert the banana plug
into the end of the terminal.
Banana plug
F
R
ON
T
Connecting the subwoofer
1
Connect the subwoofer input jack to the SUBWOOFER
jack on this unit with an audio pin cable.
2
Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
Subwoofer examples
VOLUME
MIN MAX
CROSSOVER/
HIGH CUT
MIN MAX
This unit can connect speakers that support Bi-amp connection for
front speakers. Refer to “Owners Manual” for the details.
7.1
Connect when using with 7.1-channel speaker layout.
6.1
Connect when using with 6.1-channel speaker layout.
FRO
N
T
2
2
3
1
4
4
1
Remove approximately 10 mm of insulation from
the ends of the speaker cables, and twist the bare
wires of the cables together  rmly so that they will
not cause short circuits.
2
Loosen the speaker terminals.
3
Insert the bare wire of the speaker cable into the
gap on the side of the terminal.
4
Tighten the terminal.
Caution:
Remove the AC power cable of this unit from the power outlet
before connecting the speakers.
Generally speaker cables consist of two parallel insulated
cables. One of these cables is a different color, or has a
line running along it, to indicate different polarity. Insert the
different colored (or lined) cable into the “+” (positive, red)
terminal on this unit and the speakers, and the other cable into
the “-” (minus, black) terminal.
Be careful that the core of the speaker cable does not touch
anything or come into contact with the metal areas of this
unit. This may damage this unit or the speakers. If the speaker
cables short circuit, “CHECK SP WIRES!” will appear on the
front panel display when this unit is switched on.
(U.S.A. and Canada models only) When connecting 6 Ω
speakers, set the speaker impedance to 6 Ω on this unit before
making connections. Refer to Owners Manual for information
on settings.
- 4 -
2
2
Connect a TV
Listening to TV audio
To playback TV audio on this unit, connect the TV audio output to this
unit.
Connect the following input jacks, matching the audio output jacks on
your TV. When viewing your TV, select the appropriate input source on
this unit.
Audio
output
COMPONENT
VIDEO
P
R
P
B
Y
OPTICAL OPTICAL
(
TV
)
A
V
1
A
V
2
A
V
3
A
V
4
A
V
5
COAXIAL COAXIAL
(
CD
)
VIDEO
DOCK
C
O
M
P
O
E
V
I
D
E
O
P
R
P
B
Y
V
I
D
E
O
D
O
C
K
OPTICAL
O
O
Audio output from TV
Input jack on this unit
Optical digital output AV1 or AV4
Coaxial digital output AV2 or AV3
Analog output
One of AV5, AV6, AUDIO1,
AUDIO2, and V-AUX
HDMI Audio Return Channel
(Described in the right column)
HDMI OUT
Connecting to AV4 allows you to playback TV audio just by pressing
the “TV” under “SCENE” key.
When using an HDMI compatible TV that supports Audio
Return Channel functions and / or HDMI Control functions (Ex.
Panasonic VIERA Link), you can enjoy the TV sound on this unit
as follows:
When using a TV that supports the Audio Return
Channel functions and HDMI Control functions
The audio / video output from the unit to the TV and audio
output from the TV to the unit are possible using a single HDMI
cable.
The input source is switched automatically to match operations
carried out on the TV, and that makes TV sound control easier
to use.
For the connections and settings, refer to “Using the HDMI
Control function” in Owner’s Manual.
When using a TV that supports HDMI Control functions
When HDMI Control functions are enabled on the unit, input
source can be switched automatically to match operations
carried out on the TV.
For the connections and settings, refer to “Using the HDMI
Control function” in Owner’s Manual.
If your TV has multiple inputs, connect with the following priority (A to C).
Video input to this unit is output to a TV using output jacks of the
same kind.
When connecting to a HDMI compatible TV
Video signal such as component video and video received by this
unit is converted to HDMI and output to the TV. Just select HDMI
input on the TV to view video from any external source connected
to this unit.
You can change the resolution and aspect ratio used when
converting to HDMI to suit your requirements.
Only U.K. and Europe models are equipped with the S VIDEO jacks. The
video signals input from the S VIDEO jack are output only from HDMI.
When connecting to a non-HDMI compatible TV
Connect to the TV using the same type of connection that you
used to connect to the playback device, and change the inputs
on your TV to match that of the playback device you are using for
playback.
COMPONENT
VIDEO
HDMI
VIDEO
COMPONENT
VIDEO
HDMI
VIDEO
S VIDEO
Input Output
HDMI input
Component
video input
Video input
Through
Converted
S VIDEO
COMPONENT
VIDEO
P
R
P
B
Y
OPTICAL OPTICAL
(
TV
)
AV
1
AV
2
AV
3
AV
4
AV
5
AV
6
A
U
DI
O
1
A
UDI
O
2
COAXIAL COAXIAL
(
CD
)
(
BD/DVD
)
HDMI 2HDMI 1 H
D
HDMI
OUT
AV
OUT
VIDEO
DOCK
ANTENNA
FM
75ǡ
GND
AM
MONITOR OUT
COMPONENT
VIDEO
VIDEO
P
R
P
B
Y
S
V
I
D
E
O
C
O
M
P
O
N
E
N
T
V
I
D
E
O
P
R
P
B
Y
O
P
T
I
C
A
L
O
P
T
I
C
A
L
(
T
V
)
A
V
A
A
1
A
V
A
A
2
A
V
A
A
3
A
V
A
A
4
A
V
A
A
5
A
V
A
A
6
A
U
D
I
O
1
A
U
D
I
O
2
C
O
A
X
I
A
L
C
O
A
X
I
A
L
(
C
D
)
(
B
D
/
D
V
D
)
H
D
M
I
2
H
D
M
I
1
H
D
A
V
AA
O
U
T
V
I
D
E
O
D
O
C
K
A
N
T
E
N
NA
F
M
7
5
ǡ
G
N
D
A
M
VIDEO
VIDEO
COMPONENT
VIDEO
V
V
PR
Y
V
V
HDMI
PR
Y
PB
PB
HDMI
HDMI
A When using an HDMI
compatible TV.
B When using a component
video input-compatible TV.
C
When using a TV compatible
with video input only.
(Ex.: U.K. and Europe models)
VOLTAGE
SELECTOR
VOLTAGE SELECTOR
(Asia and General models only)
Select the switch position according to your local voltage
using a straight slot screwdriver.
(General model)
Voltages are AC 110/120/220/230-240 V, 50/60 Hz.
(Asia model)
Voltages are AC 220/230-240 V, 50/60 Hz.
Caution
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local voltage BEFORE plugging the
power cable into the AC wall outlet. Improper setting of
the VOLTAGE SELECTOR may cause damage to this
unit and create a potential  re hazard.
AC power cable
To the power
outlet
- 5 -
3
3
Connect playback device such as BD/DVD players and recorders
When playback, select the corresponding input source to which the jack is connected.
Connecting to HDMI1 allows you to select the HDMI input just by pressing the “BD/DVD” under SCENE” key.
Connecting to AV3 allows you to select the AV3 input just by pressing the “CD” under SCENE key.
If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from
component video output jacks and audio from analog output jacks. Refer to Owner's Manual for details.
Only U.K. and Europe models are equipped with the S VIDEO jacks. The video signals input from the S VIDEO jack are output only from
HDMI.
If your playback device has multiple audio/video outputs, connect with the following
priority (A to D) to enjoy a higher quality sounds and images.
4
4
Set the VOLTAGE SELECTOR and connect the AC power cable
(Asia and General models)
Connect the AC power cable
(Other models)
S VIDEO
COMPONENT
VIDEO
P
R
P
B
Y
OPTICAL OPTICAL
(
TV
)
A
V 1
A
V 2
A
V 3
A
V 4
A
V 5
A
V 6
AUD
I
O
1
A
U
D
I
O 2
COAXIAL COAXIAL
(
CD
)
(
BD/DVD
)
HDMI 2HDMI 1 HDMI 3
HDMI
OUT
AV
OUT
VIDEO
DOCK
ARC
ANTENNA
FM
75ǡ
GND
AM
MONITOR OUT
COMPONENT
VIDEO
VIDEO
P
R
P
B
Y
O
P
T
I
C
A
L
(
T
V
)
A
V
A
A
3
A
V
A
A
4
A
V
A
A
6
A
U
D
I
O
1
A
U
D
I
O
2
C
O
A
X
I
A
L
(
C
D
)
H
D
M
I
2
H
D
M
I
3
H
D
M
I
O
U
T
A
V
A
A
O
U
T
V
I
D
E
O
D
O
C
K
A
R
C
A
N
T
E
N
N
A
F
M
7
5
ǡ
G
N
D
A
M
M
O
N
I
T
O
R
O
U
T
C
S
V
I
D
E
O
O
M
P
O
N
E
N
T
V
I
D
E
O
V
I
D
E
O
P
R
P
B
Y
AUDIO
VIDEO
COMPONENT
VIDEO
COAXIAL
OPTICAL
COMPONENT
VIDEO
HDMI
HDMI
P
R
P
R
P
B
Y
P
R
Y
O
O
R
R
HDMI
Y
P
B
P
B
O
P
B
P
B
C
C
V
V
P
R
Y
Y
P
R
L
L
A When playback device is capable
of HDMI output
B When playback device is capable
of component video output (with
optical digital audio output)
C When playback device is capable
of component video output (with
coaxial digital audio output)
D When playback device is capable
of video output (with analog
audio output) only
(Ex.: U.K. and Europe models)
- 6 -
5
5
Set up the speaker parameters automatically (YPAO)
When connection is  nished, adjust the status, sizes, and volume balance of the
speakers to provide an optimal sound  eld. This unit is equipped with a YPAO
(Yamaha Parametric Room Acoustic Optimizer) function that adjusts the speaker
balance automatically with a simple procedure.
When you use YPAO, a test tone will be output from the speakers for approximately 3 minutes and acoustic measuring will be performed.
When using YPAO, be careful of the following.
The test tone is output at high volume. Please refrain from using this function at night when it may be a nuisance to others nearby.
Please take care that the test tone does not frighten any small children.
When operating the YPAO, information is displayed both on the TV screen (On-Screen Display) and on the front panel. This explanation will use
operations while viewing the display on the TV screen.
1
Check the following before using YPAO.
This unit
The headphones are removed.
TV
This unit is connected to the TV correctly.
The power is turned on.
The video input to which the video output from this unit has been selected.
Subwoofer
The power is turned on.
Volume is set to approximately half, and the cross-over frequency (if present)
is set to maximum.
2
Place the supplied YPAO microphone at ear height in your listening position.
When positioning the microphone, we recommend that you use
equipment that allows you to adjust the height (such as a tripod) as a
microphone stand. When using a tripod, use the tripod screws to  x
the microphone in place.
3
Press RECEIVER A on the remote control to switch this unit on.
4
Connect the YPAO microphone to the YPAO MIC jack on the front panel.
YPAO microphone
INFO
YPAO MIC
“MIC ON. View OSD MENU” appears
on the front panel display, and then
appears the following display on the TV
screen.
bbAutobSetup
bbbbEQbType;;;;Natural
bbbb[SETUP]:Start
bbb[OPTION]:EQbSelect
bb.bStart
Subwoofer examples
VOLUME
MIN MAX
CROSSOVER/
HIGH CUT
MIN MAX
YPAO microphone
Continues to
the next page
- 7 -
RECEIVER
SCENE
OPTION
SETUP
RETURN
VOLUME
ENHANCER
SUR. DECODE
STRAIGHT DIRECT
HDMI
AV
AUDIO
TRANSMIT
SLEEP
1234
1234
1256
V-AUX
TUNER
FM
INFO
MEMORY
AM
PRESET
TUNING
MOVIE MUSIC
STEREO
BD
DVD
TV
CD
RADIO
MUTE
ENTER
7856
90
10
1234
REC
ENT
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
CODE SET
INPUT
MUTE
DOCK[ A ] [ B ]
S
C
E
N
E
O
P
T
I
O
N
R
E
T
U
R
N
V
O
L
U
M
E
E
N
H
A
N
C
E
R
S
U
R
.
D
E
C
O
D
E
S
T
R
A
I
G
H
T
D
I
R
E
C
T
H
D
M
I
A
V
A
A
A
U
D
I
O
T
R
A
N
S
M
I
T
S
L
E
E
P
1
2
3
4
1
2
3
4
1
2
5
6
V
-
V
V
A
U
X
T
U
N
E
R
F
M
I
N
F
O
M
E
M
O
R
Y
A
M
P
R
E
S
E
T
T
U
N
I
N
G
M
O
V
I
E
M
U
S
I
C
S
T
E
R
E
O
B
D
D
V
D
T
V
C
D
R
A
D
I
O
M
U
T
E
7
8
5
6
9
0
1
0
1
2
3
4
R
E
C
E
N
T
T
V
T
V
V
O
L
T
V
C
H
T
O
P
M
E
N
U
P
O
P
-
U
P
M
E
N
U
D
I
S
P
L
A
Y
A
A
S
O
U
R
C
E
C
O
D
E
S
E
T
I
N
P
U
T
M
U
T
E
D
O
C
K
[
A
]
[
B
]
SETUP
RECEIVER
A
ENTER
This completes preparations. To achieve more accurate results, be careful of the following when
measuring.
Measuring will take approximately 3 minutes. Keep the room as quiet as possible during
measurement.
Wait in the corner of the listening room during measurement or leave it entirely, to avoid
becoming an obstruction between the speakers and the YPAO microphone.
5
Press SETUP on the remote control to start measurement.
bbAutobSetup
bb.b;PrebCheck
bb
bbbb;Initializing
bbbbbb[b]bbb:Exitb
bbbb;MainbCheck
bbbbbbbbbbbbbbbbbbbbb
bbbbCheckbCHb=bFrontbL
bbbb;Calculation
bbbb;Level
bbbb;;;;;;;;;;;;;;;02%
[
The following display appears if measurement  nishes without any problems.
bbAutobSetup
bbbbResult
bbbb[ENTER]:Finish
bbbbbSPbb:bbbbb3/4/0.1
bbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbb
bb.bb>SetbbbbCancel
bbbbbDIST:bb2.50/b3.00m
bbbbbLVLb:b-1.0/b+1.5dB
bbbb[p]/[[]:Select
SP
Displays the number of speakers connected to this
unit in the following order:
Total of Front and Center/Total of Surround and
Surround Back/Subwoofer
DIST
Displays the speaker distance from the listening
position in the following order:
Closest speaker distance/Farthest speaker distance
LVL
Displays the speaker output levels in the following order:
Lowest speaker output level/Highest speaker output
level
Note
When a problem occurs, an error message or a warning
message appears either during or after measurement. Refer
to “Set up the speaker parameters automatically (YPAO)” in
Owner’s Manual to solve the problem, and carry out YPAO again.
6
Press ENTER on the remote control to apply the results
of measurement.
Auto Setup
AUTO SETUP Finished
[SETUP]:Exit
PRESS [ENTER]
Disconnect Microphone
7
Remove the YPAO microphone.
YPAO  nishes automatically when the YPAO
microphone is removed.
INFO
YPAO MIC
You can use the following functions with this
unit. For details on the operations, refer to
Owner’s Manual on the supplied CD-ROM.
Various parameter adjustment to match your
listening environment
- Sound quality control with the equalizer
<Graphic Equalizer>
- Easy listening at low volumes <Adaptive DRC>
- Adjusting volume between input sources
<Volume Trim>
External device connection and playback
- Connections and playback from BD/DVD players
(recorders), TV audio, and other devices
- Playback from an iPod/iPhone
- Playback from a Bluetooth device
FM/AM tuner
- Simple preset tuning
- (U.K. and Europe models)
Radio Data System tuning
- (U.K. and Europe models)
Automatic traffic information reception
- (Asia and General models only)
Changing FM/AM frequency steps initializing various
settings for this unit
etc.
- 8 -
RECEIVER
SCENE
OPTION
SETUP
RETURN
VOLUME
ENHANCER
SUR. DECODE
STRAIGHT DIRECT
HDMI
AV
AUDIO
TRANSMIT
SLEEP
1234
1234
1256
V-AU X
TUNER
FM
INFO
MEMORY
AM
PRESET
TUNING
MOVIE MUSIC
STEREO
BD
DVD
TV
CD
RADIO
MUTE
ENTER
7856
90
10
1234
REC
ENT
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
CODE SET
INPUT
MUTE
DOCK[ A ] [ B ]
Operation guide
1
Switches this unit between on and standby mode
This unit switches between on and standby mode every time you press this key.
2
Choose an input source to listen to
The name of the selected input source appears on the front panel display.
SW
C
L
SL SR
R
HDMI1
VOL.
SBL SBR
3
Select sound  eld programs and sound decoders
Front
panel
Remote
control
Description
PROGRAM
MOVIE
Selects sound  eld programs optimized for viewing movies,
dramas, and sports.
MUSIC
Selects sound  eld programs optimized for appreciating music.
ENHANCER
STEREO
Selects settings for stereo playback or enhancers for
compressed audio.
SUR. DECODE
Selects surround decoders such as Dolby Pro Logic II.
STRAIGHT
STRAIGHT
Switches to straight decoding mode for stereo/multi-channel
playback without using a sound  eld program.
DIRECT
DIRECT
Switches to direct mode for faithful reproduction of audio.
4
Adjusts the volume level
The current volume level is displayed on the front panel display.
SW
C
L
SL SR
R
SBL SBR
Volume -18.5dB
VOL.
5
Mutes the sound
The indicator blinks while the sound is muted.
6
Switches between input settings
You can switch input sources and sound  eld programs with a single key.
SCENE Input Sound field program
BD/DVD HDMI 1 Straight
TV AV4 Straight
CD AV3 Straight
RADIO TUNER 7ch Enhancer
Pressing and holding this key allows you to store input sources/sound  eld programs. -
Press this key when this unit is in standby mode to switch on the unit. -
7
Adjusting high/low-frequency sound (Tone control)
1
Press TONE CONTROL to select “Treble or “Bass.
SW
C
L
SL SR
R
TONE
Treble 0.0dB
VOL.
SBL SBR
2
Press PROGRAM l / h to adjust the output level in those
frequency ranges.
You can set the tone control for speakers and headphones separately. Connect the -
headphones when adjusting the headphone tone control.
If you set an extreme tone balance, sounds may not match those from other channels. -
VIDEO
AUX
PHONES
SILENT
CINEMA
TONE
CONTROL
STRAIGHT
VOLU ME
TV
BD
DVD
CD
RADIO
INPUT
PROGRAM
SCENE
VIDEO
AUDIO
PORTABLE
LR
INFO
MEMORY
PRESET
FM AM
TUNING
YPAO MIC DIRECT
©2010 Yamaha Corporation
YC507B0/QREN
1 / 1

Yamaha HTR-5063 Ghid de referință

Categorie
Receptoare AV
Tip
Ghid de referință