Yamaha SU200 Manualul proprietarului

Marca: Yamaha

Model: SU200

Categorie: Instrumente muzicale

Tip: Manualul proprietarului

M.D.G., EMI Division, Yamaha Corporation

V484910 004CRAP12.2-01A0 Printed in Japan

OWNER'S MANUAL

BEDIENUNGSANLEITUNG

MODE D'EMPLOI

This document is printed on recycled chlorine free (ECF) paper with soy ink.

Auf Recycling-Umweltpapier mit Sojatinte gedruckt.

Ce document a été imprimé sur du papier recyclé non blanchi au chlore

avec de l'encre d'huile de soja.

This product utilizes batteries or an external power supply (adapter).

DO NOT connect this product to any power supply or adapter other

than one described in the manual, on the name plate, or specifically

recommended by Yamaha.

WARNING: Do not place this product in a position where anyone could

walk on, trip over ,or roll anything over power or connecting cords of any

kind. The use of an extension cord is not recommended! IF you must use

an extension cord, the minimum wire size for a 25' cord (or less ) is 18

AWG. NOTE: The smaller the AWG number ,the larger the current

handling capacity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the

time of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to update

existing units.

This product, either alone or in combination with an amplifier and head-

phones or speaker/s, may be capable of producing sound levels that

could cause permanent hearing loss. DO NOT operate for long periods

of time at a high volume level or at a level that is uncomfortable. If you

experience any hearing loss or ringing in the ears, you should consult

an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory mounting

fixtures that are either supplied with the product or as optional accesso-

ries. Some of these items are designed to be dealer assembled or

installed. Please make sure that benches are stable and any optional

fixtures (where applicable) are well secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are not

covered by the manufacturer’s warranty, and are therefore the owners

responsibility. Please study this manual carefully and consult your

dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keep-

ing with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of

battery is approximately five years. When replacement becomes

necessary, contact a qualified service representative to perform the

replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery

being charged.

When installing batteries, do not mix batteries with new, or with batter-

ies of a different type. Batteries MUST be installed correctly. Mis-

matches or incorrect installation may result in overheating and battery

case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all

batteries away from children. Dispose of used batteries promptly and

as regulated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some

reason its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of prod-

ucts that contain lead, batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

SPECIAL MESSAGE SECTION

PLEASE KEEP THIS MANUAL

92-BP (bottom)

(4)-7

• Do not operate the instrument for a long period of time at a high or uncomfortable

volume level, since this can cause permanent hearing loss. If you experience any hearing

loss or ringing in the ears, consult a physician.

■DATA BACK-UP AND STORAGE

• Yamaha recommends that you regularly save data using

a Memory Card (SmartMedia)

and storing the

Memory Cards

in a safe, cool, dry place. YAMAHA CANNOT BE HELD

RESPONSIBLE FOR THE ACCIDENTAL LOSS OF IMPORTANT MUSIC DATA!

Yamaha cannot be held responsible for damage caused by improper use or

modifications to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

Make sure to discard used batteries according to local regulations.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock,

short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not open the instrument or attempt to disassemble the internal parts or modify them

in any way. The instrument contains no user-serviceable parts. If it should appear to be

malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha

service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet conditions, or

place containers on it containing liquids which might spill into any openings.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is a sudden loss

of sound during use of the instrument, or if any unusual smells or smoke should appear

to be caused by it, immediately turn off the power switch, disconnect the adaptor plug

from the outlet, and have the instrument inspected by qualified Yamaha service personnel.

• Use the specified adaptor (PA-3B or an equivalent recommended by Yamaha) only.

Using the wrong adaptor can result in damage to the instrument or overheating.

• Before cleaning the instrument, always remove the electric plug from the outlet. Never

insert or remove an electric plug with wet hands.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the

instrument or other property. These precautions include, but are not limited to, the following:

• Do not place the AC adaptor cord near heat sources such as heaters or radiators, and do

not excessively bend or otherwise damage the cord, place heavy objects on it, or place

it in a position where anyone could walk on, trip over, or roll anything over it.

• When removing the electric plug from the instrument or an outlet, always hold the plug

itself and not the cord.

• Do not connect the instrument to an electrical outlet using a multiple-connector. Doing

so can result in lower sound quality, or possibly cause overheating in the outlet.

• Unplug the AC power adaptor when not using the instrument, or during electrical storms.

• Always make sure all batteries are inserted in conformity with the +/- polarity markings.

Failure to do so might result in overheating, fire, or battery fluid leakage.

• Always replace all batteries at the same time. Do not use new batteries together with old

ones. Also, do not mix battery types, such as alkaline batteries with manganese batteries,

or batteries from different makers, or different types of batteries from the same maker,

since this can cause overheating, fire, or battery fluid leakage.

• Do not dispose of batteries in fire.

• Do not attempt to recharge batteries that are not intended to be charged.

• When the batteries run out, or if the instrument is not to be used for a long time, remove

the batteries from the instrument to prevent possible leakage of the battery fluid.

• Keep batteries away from children.

• Before connecting the instrument to other electronic components, turn off the power for

all components. Before turning the power on or off for all components, set all volume

levels to minimum. Also, be sure to set the volumes of all components at their minimum

levels and gradually raise the volume controls while playing the instrument to set the

desired listening level.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat

(such as in direct sunlight, near a heater, or in a car during the day) to prevent the

possibility of panel disfiguration or damage to the internal components.

• Do not use the instrument near other electrical products such as televisions, radios, or

speakers, since this might cause interference which can affect proper operation of the

other products.

• Do not place the instrument in an unstable position where it might accidentally fall over.

• Before moving the instrument, remove all connected adaptor and other cables.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents,

cleaning fluids, or chemical-impregnated wiping cloths. Also, do not place vinyl, plastic

or rubber objects on the instrument, since this might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not use

excessive force on the buttons, switches or connectors.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should

come in contact with your eyes, mouth, or skin, wash immediately with water and

consult a doctor. Battery fluid is corrosive and may possibly cause loss of sight or

chemical burns.

Introduction

Thank you for your purchase of the SU200 Sampling Unit. The SU200 offers CD-quality

sample recording and easy pad-controlled replay of recorded samples. Its effect control

knobs and ribbon controller allow you to apply scratch, ﬁltering, and other impressive

effects both to samples and to realtime audio input. The SU200 is compact and easy to use,

and is great for capturing and using familiar and interesting sounds.

Reading this manually carefully will help you take full advantage of the SU200’s many

excellent features. After reading through the manual, please store it in a safe place

(together with the warranty) so that you can refer back to it again as needed.

Package Contents (Make sure all items are included.)

●

SU200

●

Sampling CD

●

Owner’s manual (this manual)

Using The Manual

●

SU200 Features

........................................................................................................................................ Page 6

Introduces the various SU200 features.

●

Contents

...................................................................................................................................................... Page 7

●

Supplying Power

...................................................................................................................................... Page 12

Explains how to connect up the power adaptor and how to install batteries.

●

SU200 Design

.......................................................................................................................................... Page 14

Explains the SU200’s conﬁguration and controls.

●

Quick Start

..................................................................................................................................... Pages 16 to 21

A short tutorial that shows you what the SU200 can do.

●

Chapters 1 to 7

.............................................................................................................................. Pages 22 to 51

Detailed explanations and procedures for each of the SU200 features.

●

Troubleshooting

........................................................................................................................................ Page 54

Solutions to common problems. Check here before requesting service.

* Screen images and other illustrations in this manual are for explanatory purposes only, and may differ from actual

screen displays and machine states.

ENGLISH

What is Sampling?

The SU200 records sound from a microphone or from input from a CD player or similar audio device. This

recording process is called

sampling

, and the recorded sounds are called

samples

. You can record a sample

into each pad, and play the sample back by pressing the pad. The SU200 can store up to 24 samples (3 banks

8 pads) in its internal memory.

Samples are stored in digital form, just like recordings on an audio CD. The SU200 is capable of CD-quality

recording.

●

Various playback features

In addition to playing samples back exactly as recorded, the SU200 also offers various types of special play-

back.

• Play part or all of a sample repeatedly. (Loop play)............................................................................. Page 29

• Play a sample backwards. (Reverse play)............................................................................................. Page 29

• Select the part of the sample that plays back. (Start point/end point)............................................... Page 30

The following illustration shows how playback works when you have set up start and end points and selected

loop play.

●

Sample editing

The SU200 can delete the unplayed parts of your sample.

PHONES MIC INPUT MIDI IN

REC TRGLVLDATA

EFFECT

CONTROL

VOLUME

TYPE

LFO

LO-FI

DELAY LEVEL

RESONANCE

VARI

GATE TIME

MOD SPEED

DRIVE

TIME

CUTOFF

3.3V

CARD

DC INLINE INPUT

L R

STEREO OUTPUT

L R

BANK

JOB EXIT

RESMPL

REC

BPM

NORMAL

REVERSE

START

POINT

END

POINT

CLEAR

START

STOP

SLICE

DELAY FILTER SCRATCH

SCALE

PAD

TIME STRETCH COPY PAD VOL SAVE DELETE MIDILOAD

CARD

TIME

DIST/

LO-FI

LOOP

REMIX

TECH

MOD

DELETE

EXTRACT

ONE SHOT

LOOP

GRADE

GATE

TRIGGER

STEREO/MONO

–1/NO

1/YES

BANK BANK

STANDBY

SAMPLING UNIT

EFFECT TYPE

LOOP REMIX

SLICE

TECHMOD

DIST/LO-FI

DELAY

FILTER

8888888

~~~~~~

~~~~~

LOOP TR

PLAY

PAD PLAY Play PAD 1 8

LOOP TRACK PLAY

Select

EFFECT

LOOP REMIX Turn KNOB 1,2

Play PAD 1 8

Press LOOP TR PLAY Button

EFFECTS

under the knobs

Select

BANK A C

CD MD

Record samples.

“ABCDE”

Press pads to play samples back.

ABC D E

Start Point End Point

C D C D C D C D......

Sample

ABC D E

Start Point End point

Extract

Sample Sample

SU200 Features

The SU200 provides more than just standard sampling. This page introduces you to some of the

special features included on the SU200.

■

Loop-Track Play: Play loop samples in unison, all at the same tempo (BPM)

(

→

Pages 18, 32)

Although each sample has its own tempo setting, you can use this feature to play out multiple

samples all at the same tempo. (You can also use an external MIDI clock to synchronize the play-

back.)

■

Powerful Effects and Filter (

→

Pages 17, 36)

Use the Loop Remix effect to rearrange break beats in real time. Or select from other dynamic

effects, or apply a ﬁlter. You can control the characteristics of each effect using the ribbon con-

troller and Effect Control knobs.

■

Clear User Interface

• The backlit display makes it easy to view your panel settings.

• Pads light up when pressed, so that you can easily see which pads are playing.

• Effect buttons ([DIST] to [FILTER]) and the [SCRATCH] button light up when pressed, so that

you can easily identify the effect that is currently selected.

●

Apply effects and ﬁltering to realtime audio input (

→

Page 19)

Apply ﬁltering or an effects (TECH MOD, DIST/LO-FI, or DELAY) to input from an external

audio source.

●

Includes resampling capability (

→

Page 26)

Mix multiple samples (together with effects, scratch, and ﬁlter) and record the result as a single

new sample.

●

Includes a memory-card slot (

→

Page 40)

Use a memory card (SmartMedia card) to save and load sample data or WAV ﬁles.

●

Allows simultaneous playback of samples recorded at different grades

You can record a sample in any of four grades (quality levels). This allows you to economize on

memory: use low grades for sounds that are not affected by the quality level, and use high grades

for sounds that require high resolution (cymbal sounds, etc.). You can play all of these samples

back at the same time.

●

Can operate on battery power

You can use the SU200 outdoors and in other locations where power connections are not avail-

able.

ENGLISH

Contents

Controls, Connectors, and the LCD .................................................................................................................... 8

Power connections ............................................................................................................................................ 12

The SU200 Design ............................................................................................................................................. 14

Quick Start ...........................................................................................................................16

Playing Samples ................................................................................................................................................ 16

Using the Effects and Filter .............................................................................................................................. 17

Using Loop-Track Play ...................................................................................................................................... 18

Applying Effects or Filter to Realtime Audio Input ......................................................................................... 19

Recording a Sample .......................................................................................................................................... 20

Chapter 1 Recording Samples .............................................................................................22

Recording a Sample (AUTO start) .................................................................................................................... 22

Recording a Sample (MANUAL start) ............................................................................................................... 24

Resampling ........................................................................................................................................................ 26

Chapter 2 Playing the Pads .................................................................................................28

Gate/Trigger Setting ......................................................................................................................................... 28

One-shot/Loop Setting...................................................................................................................................... 29

Normal/Reverse Setting .................................................................................................................................... 29

Setting the Start Point and End Point ............................................................................................................. 30

Using the [HOLD] Feature ................................................................................................................................ 32

Loop-Track Play ................................................................................................................................................. 32

Chapter 3 Sample Editing ....................................................................................................34

DELETE (Deleting an Entire Sample) ............................................................................................................. 34

EXTRACT (Deleting The Unused Ends of a Sample) ....................................................................................... 35

Chapter 4 Effects .................................................................................................................36

Selecting the Pad that Receives the Effect or Filter ........................................................................................ 36

Effects, Filter, and Scratch ............................................................................................................................... 36

Chapter 5 MIDI Features .....................................................................................................38

About MIDI......................................................................................................................................................... 38

Setting the MIDI Clock and MIDI Channel ...................................................................................................... 39

Chapter 6 Using Memory Cards ..........................................................................................40

Saving Data into a Memory Card...................................................................................................................... 42

Loading Data from a Memory Card .................................................................................................................. 44

Deleting Data from a Memory Card ................................................................................................................. 46

Formatting a Memory Card .............................................................................................................................. 47

Chapter 7 Other Useful Features .........................................................................................48

Scale Play .......................................................................................................................................................... 48

Time Stretch (Changing a Sample’s Length) ................................................................................................... 49

Copying a Sample into Another Pad ................................................................................................................ 50

Adjusting the Playback Volume for Each Pad .................................................................................................. 50

Using Memory Protection to Prevent Accidental Deletion .............................................................................. 51

Reference ............................................................................................................................52

Displayed Messages ........................................................................................................................................... 52

Troubleshooting ................................................................................................................................................ 54

Speciﬁcations .................................................................................................................................................... 55

Index .................................................................................................................................................................. 56

MIDI Implementation Chart ............................................................................................................................. 60

Controls, Connectors, and the LCD

PHONES MIC INPUT MIDI IN

REC TRGLVLDATA

EFFECT

CONTROL

VOLUME

TYPE

LFO

LO-FI

DELAY LEVEL

RESONANCE

VARI

GAT E TIME

MOD SPEED

DRIVE

TIME

CUTOFF

3.3V

CARD

DC INLINE INPUT

L R

STEREO OUTPUT

L R

BANK

JOB EXIT

RESMPL

REC

BPM

NORMAL

REVERSE

START

POINT

END

POINT

CLEAR

START

STOP

SLICE

DELAY FILTER SCRATCH

SCALE

PAD

TIME STRETCH COPY PAD VOL SAVE DELETE MIDILOAD

CARD

TIME

DIST/

LO-FI

LOOP

REMIX

TECH

MOD

DELETE

EXTRACT

ONE SHOT

LOOP

GRADE

GATE

TRIGGER

STEREO/MONO

–1/NO

1/YES

BANK BANK

STANDBY

SAMPLING UNIT

EFFECT TYPE

LOOP REMIX

SLICE

TECHMOD

DIST/LO-FI

DELAY

FILTER

8888888

~~~~~~

~~~~~

LOOP TR

PLAY

@4 @5 @6

!7 !8 !9

@8 @9

@1 @2 @3

!3!2 !4

y u

Front Panel

Controls, Connectors, and the LCD

ENGLISH

Liquid Crystal Display (LCD)

...................................................................................................................... Page11

VOLUME Control Knob

................................................................................................................... Page 13

EFFECT CONTROL Knobs 1 and 2

............................................................................................. Page 17

Ribbon Controller

............................................................................................................................. Page 17

[LOOP REMIX] Button

..............................................................................................................Pages 17, 36

[SLICE] Button

...........................................................................................................................Pages 17, 36

u [TECH MOD] Button .................................................................................................................Pages 17, 36

i [DIST/LO-FI] Button..................................................................................................................Pages 17, 36

o [DELAY] Button..........................................................................................................................Pages 17, 36

!0 [FILTER] Button .........................................................................................................................Pages 17, 36

!1 [SCRATCH] Button....................................................................................................................Pages 17, 36

!2 [JOB] Button...................................................................................................................Pages 15, 39, 42, 48

!3 [EXIT] Button..................................................................................................................................... Page 15

!4 [-1/NO], [+1/YES] Buttons........................................................................................................Pages 18, 22

!5 Bank buttons (Banks A, B, C)......................................................................................................... Page 16

!6 [LOOP TR PLAY] Button ..........................................................................................................Pages 18, 32

!7 [RSMPLE] Button............................................................................................................................. Page 26

!8 [REC] Button........................................................................................................................Pages 20, 22, 24

!9 [START/STOP] Button ..................................................................................................Pages 21, 23, 25, 26

@0 [HOLD] Button................................................................................................................................... Page 32

@1 [GATE/TRIGGER] Button................................................................................................................ Page 28

@2 [ONE SHOT/LOOP] Button............................................................................................................. Page 29

@3 [NORMAL/REVERSE] Button........................................................................................................ Page 29

@4 [START POINT] Button.............................................................................................................Pages 30, 31

@5 [END POINT] Button.................................................................................................................Pages 30, 31

@6 [POINT CLEAR] Button................................................................................................................... Page 31

@7 [DELETE/EXTRACT] Button...................................................................................................Pages 34, 35

@8 [TIME] Button.............................................................................................................................Pages 17, 37

@9 [TAP] button....................................................................................................................................... Page 37

#0 Pads 1 to 8......................................................................................................................................... Page 16

#1 [AUDIO IN] Button............................................................................................................................ Page 19

Controls, Connectors, and the LCD

Rear Panel and Connections

q STANDBY/ON Switch................................................................................................................................. Page 13

Press to toggle the power on or off. (Power is on when the switch is pressed in.)

w DC IN Power Input

Connects to the optional PA-3B power adaptor.

e MIDI IN Connector...................................................................................................................................... Page 38

Connects to external MIDI device (electronic instrument or computer). Allows you to control SU200 opera-

tion from the external device.

r Card Slot....................................................................................................................................................... Page 40

Accepts insertion of a memory card. You use memory cards to save and load samples.

t STEREO OUTPUT Jacks (R, L)

The SU200’s audio outputs. As the SU200 does not include an internal amp or speakers, you need to connect

these outputs to an external audio device in order to play out the sound.

y LINE INPUT Jacks (R, L)

Inputs an audio signal for sampling or for AUDIO IN throughput. Connects to output cables from an external

device such as a CD player or mixer.

u MIC INPUT Jack

Connects to a dynamic microphone or a battery-powered condenser microphone.

i PHONES Jack

Connects to a headphone set. (Use the VOLUME knob to control the volume to the headphones.)

•

Don’t leave the headphone volume set too high. Prolonged listening at high volume may

cause ear damage.

PHONES

MIC INPUT

MIDI IN

3.3V

CARD

DC IN

LINE INPUT

R L

STEREO OUTPUT

R L

STANDBY

ew r

t y

u i

External Sequencer

(RM1x, etc.)

CAUTION

Controls, Connectors, and the LCD

ENGLISH

Display

q STEREO/MONO............................................................................................................................Pages 22, 24, 26

w HI/STD/LONG/EXLG

..................................................................................................................................Pages 22, 24

Indicates the currently selected sampling grade. You can change the selection using the [GRADE] button.

Higher grades offer better quality but require more memory. Total available sampling time for each grade

(with the SU200 set to MONO) are as follows.

• HI.............................................. Up to 42 seconds. Offers high-quality sampling, roughly equivalent to that of a

standard CD.

• STD (standard)......................... Up to 83 seconds.

• LONG........................................ Up to 166 seconds.

• EXLG (extra long) .................... Up to 333 seconds.

e MIC/LINE...................................................................................................................................................... Page 22

Indicates the source from which the SU200 receives audio input for recording or throughput. The display

changes automatically depending on whether a microphone or LINE input is connected.

• MIC ........................................... The SU200 takes audio input from the microphone connected to the MIC INPUT

jack. Automatically selected if a microphone is connected. (The SU200 does not

recognize LINE input while a microphone is connected.)

• LINE ......................................... The SU200 takes input from the audio device (CD player, etc.) connected to one or

both of the LINE INPUT jacks.

r GATE/TRG................................................................................................................................................... Page 28

t ONESHOT/LOOP ....................................................................................................................................... Page 29

y NORMAL/REVERSE.................................................................................................................................. Page 29

Beat display

During loop-track play (see page 18), the display ﬂashes to indicate the current beat (1→2→3→4→1...). The

beat advances according to the tempo (BPM).

i REC TRGLVL (Recording Trigger Level) ................................................................................................... Page 23

o INPUT ....................................................................................................................................................Pages 22, 24

!0 MANUAL/AUTO/RESMPL/MIDI, REC

• MANUAL................................... Page 24

• AUTO........................................ Page 22

• RESMPL (Resample) ............... Page 26

• MIDI ......................................... Page 33

Menu/Message Display

Numerical Display

8888888

~~~~~~

~~~~~

Power connections

While the SU200 can run from either an optional AC adaptor or batteries, Yamaha recommends use

of the more environmentally safe AC adaptor. Follow the instructions below according to the power

source you intend to use.

Using an Optional AC Power Adaptor

Z Make sure that the SU200’s STANDBY/ON switch is set to STANDBY.

X Connect the optional AC adaptor (PA-3B or other adaptor speciﬁcally recommended by

Yamaha) to the power supply jack.

C Plug the AC adaptor into an AC outlet.

To disconnect the adaptor: Set the STANDBY/ON switch to STANDBY, then unplug the adaptor from the

AC outlet, and then disconnect it from the SU200 power supply jack.

• Use ONLY a Yamaha PA-3B AC Power Adaptor (or other adaptor speciﬁcally recom-

mended by Yamaha) to power your instrument from a standard electrical outlet. The use

of other adaptors may result in irreparable damage to both the adaptor and the SU200.

• Unplug the AC Power Adaptor when not using the SU200, or during electrical storms.

Using Batteries

Z Open the battery compartment cover located on the instrumentís bottom panel.

X Insert six new batteries, being careful to follow the polarity markings on the inside of the

compartment.

C Replace the compartment cover, making sure that it locks ﬁrmly in place.

AC outlet

PA-3B

DC IN

STANDBY

WARNIN

Power connections

ENGLISH

• When the batteries need to be replaced, “Battry Low” may appear on the display, the volume

may be reduced, the sound may be distorted, and other problems may occur. When this hap-

pens, turn the power off and replace the batteries.

• Even if batteries are installed, the SU200 will automatically switch to AC power when the AC

adaptor is connected.

• To conserve battery life, the display’s backlight remains off when the SU200 is running on

batteries.

• When the batteries run down, replace them with a complete set of six new batteries.

NEVER mix old and new batteries.

• Do not use different kinds of batteries (e.g. alkaline and manganese) at the same time.

• If the instrument is not to be in use for a long time, remove the batteries from it, in order

to prevent possible leakage of battery ﬂuid.

Switching On the Power

Make the necessary connections.

Connect up headphones or an output audio device. (See page 10.)

Lower the volume settings on the SU200 and the audio device.

Press the STANDBY/ON switch to set the power ON.

The SU200 displays

YAMAHA SU200

and then enters Pad-Play mode (see page 15).

• Note that a samll amout of current continues to ﬂow even while the switch is in the

STANDBY position. If you are going to leave the SU200 unused for a prolonged period,

be sure to disconnect the adaptor and (if batteries are installed) remove the batteries.

Adjust the volume by turning the VOLUME knob.

Also adjust the volume at the external audio device.

When you are ready to turn off the SU200: Switch off the power to the output audio device

(or lower its volume) before switching off the SU200.

NOTE

CAUTION

STANDBY

CAUTION

VOLUME

The SU200 Design

Internal Conﬁguration

The SU200 consists of three internal blocks.

●

Sampler Block

Records samples from sound input from a microphone, CD player, or other audio device, and allows

editing and processing of the recorded samples.

●

Effector/Filter Block

Applies an effect or ﬁlter to the sound output from the sampler block. The SU200 provides six effect

types: some of them standard effects, and others newly designed speciﬁcally for use with sample play-

back.

●

Controller Section

Provides the various controls used for realtime playback. Includes pads for playing samples, and the rib-

bon controller and Effect Control knobs for applying effects.

BANK BANK BANK

LOOP TR

PLAY

EFFECT

CONTROL

CD MD

Sampler Block

Sample Recording

Controller Block

Effector/Filter

Block

Loop-Track

Play

The SU200 Design

ENGLISH

Memory Conﬁguration

The SU200 can store a maximum of 24 samples (8 pads × 3 banks) in its internal memory. You can

also save your SU200 samples into memory cards (see page 42).

Modes

The SU200 has three main operating modes.

●

Pad-Play Mode

The SU200 enters this mode immediately following power-on. This is the mode you use to play and edit

your samples. All operating procedures presented in this manual assume that you are starting from

Pad-Play mode.

●

Sampling Mode

This is the mode you use to record samples. You enter this mode by pressing the [REC] button, so that

the REC indication appears in the display.

●

Job Mode

You use this mode to make various settings: pad settings, memory-card settings, and so on. You enter

this mode by pressing the [JOB] button.

• If you lose track of the current mode when working at the panel, you can return to Pad-Play

mode by pressing the [EXIT] button one or more times (depending on the mode you are cur-

rently in).

Bank B

Bank A

Bank C

• Sample

• Gate/Trigger.....................................................Page 28

• Oneshot/Loop..................................................Page 29

• Normal/Reverse...............................................Page 29

• Start and end points........................................Page 30

Memory Card

NOTE

Quick Start

Playing Samples

The SU200 comes with samples recorded for all pads. You are now ready to start using the pads to

play these prerecorded samples.

Make the necessary connections.

Connect up headphones or an output audio device. (See page 10.)

Press the [STANDBY/ON] switch on the SU200’s rear panel.

The SU200 displays

YAMAHA SU200

and then enters Pad-play mode.

You can turn the power off by pressing the switch a second time.

• Even when the switch is in the “STANDBY” position, electricity is still ﬂowing to the

instrument at the minimum level. When you are not using the SU200 for a long time,

make sure you unplug the AC power adaptor from the wall AC outlet, and/or remove the

batteries from the instrument.

Pressing each pad plays a different sample.

●

For example, try pressing and holding pad 1.

Notice that the pad lights up and that a drum rhythm pattern repeats (loops) as long as the pad is held

down. The playback stops when the pad is released.

●

Next, try pressing pad 8.

The pad lights up and you hear a cymbals sample, which plays once through and then stops.

Notice that pad 1 is set for

loop

play: it continues to play the sample repeatedly as long as it is held

down. Pad 8 is set for

one-shot

play: it plays the sample once through only. You are free to set each pad

to play either loop or one-shot, and you can change the setting any time you wish. (See page 29.)

• The SU200 provides eight pads and three banks,

allowing you to store and play up to 24 samples.

(Switching the bank changes you to a whole dif-

ferent set of samples.) In the examples given here

we are using bank A.

• The SU200 can play a maximum of 6 standard (or

lower) grade monaural samples at one time, or up

to 2 high-grade samples at one time. The maxi-

mum number may decline, however, when using

the scratch or time stretch.

STANDBY

CAUTION

BANK BANK BANK

NOTE

Quick Start

ENGLISH

Using the Effects and Filter

The SU200 lets you to apply a variety of impressive effects to your samples. Now let's try using the

EFFECT CONTROL knobs and the ribbon controller on the SU200's front panel.

• Effects and scratch to not operate during playback of high-grade samples.

• The lower right of the display indicates the pad that was most recently pressed. The effect you

choose will apply to the sample in this pad.

• When the [SCRATCH] button is off, the ribbon controller operates in the same way as

EFFECT CONTROL knob 2.

EFFECT

Control the effect by turning the EFFECT CONTROL knobs.

SCRATCH

Use the ribbon controller to produce a scratch sound.

NOTE

TIME

REC TRGLVLDATA

EFFECT

CONTROL

VOLUME

TYPE

LFO

LO-FI

DELAY LEVEL

RESONANCE

VARI

GAT E TIME

MOD SPEED

DRIVE

TIME

CUTOFF

EFFECT TYPE

LOOP REMIX

SLICE

TECHMOD

DIST/LO-FI

DELAY

FILTER

SLICE

DELAY FILTER

DIST/

LO-FI

LOOP

REMIX

TECH

MOD

A-3

z Press a pad.

x Switch on the effect you wish to apply.

c Turn the EFFECT CONTROL knobs to

adjust the effect's parameters.

Example: Press the [FILTER] button

once to set the ﬁlter on.

You can then use

EFFECT CONTROL

knob 1 to control the ﬁl-

ter’s resonance, and knob

2 to control the ﬁlter’s cut-

off frequency. You can

switch the ﬁlter off by

pressing the [FILTER] but-

ton a second time.

Cuts the sound into discrete,

intermittent slices.

Applies distinctive modulation

and metallic tonality.

Breaks the sample

into pieces and

rearranges these to

build a new phrase.

Applies distortion and

reduces the ﬁdelity.

Applies a delay accord-

ing to the sample’s

tempo (BPM).

Strong ﬁltering with

resonance.

Allows you to change the

tempo in real time.

→ Page 37

NOTE

SCRATCH

z Play a pad.

c You can now scratch out the

sample you selected (in this

case, the sample for pad 3) by

rubbing your ﬁnger along the

ribbon controller.

v You can switch off scratch

operation by pressing the

[SCRATCH] button once

again.

x Press the [SCRATCH] button.

Assign a pad to the [SCRATCH] button.

You can use t

e r

ibb

on contro

er to scratc

out a selected sample. This gives you a sound

similar to what a DJ gets by manually turning

a vinyl disc.

NOTE

Quick Start

Using Loop-Track Play

Use this feature to play loop samples from multiple pads simultaneously. The SU200 temporarily

adjusts the tempo settings for each sample so that all of these samples play out at the same tempo

(the same BPM setting).

• Some samples may produce noise when used with Loop Track Play.

Press the [LOOP TR PLAY] (“Loop Track Play”) button.

Pads currently set for loop playback all begin playing in an endless loop. This operation is referred to as

Loop-Track Play

Press one of the pads that is currently playing (that is currently lit up).

The pad goes dark, and the sample goes off. (The sample is muted.)

Press the pad again, and sample’s playback resumes.

(During Loop-Track Play, the pads for your loop sample act in the same way as mixer MUTE buttons.)

Tap three or four times.

Try pressing a pad for a non-looping sample (a pad set for one-shot playback).

Pads set for one-shot playback are not affected by loop-track play. You can play these pads in the same

way as usual: press the pad once to play the sample.

Press the [LOOP TR PLAY] button again to stop sample playback.

NOTE

LOOP TR

PLAY

LoopTr

132

When you set this button on, all samples currently set for loop playback

begin playing out continuously, and the corresponding pads light up. All

samples currently set to one-shot play remain off, and their pads remain

dark. (See page 29.)

BPM

–1/NO

1/YES

LoopTr

120

Tap three or four times.

LOOP TR

PLAY

Now that you have switched off loop-track play, try pressing pads 1, 2, 3, 4, and 5 one at a time. Notice

that these pads are all set to different tempos. During loop-track play, the SU200 automatically syn-

chronizes the playback so that they all play out at the same tempo.

Note that it is also possible to synchronize sample playback using an external MIDI clock. To use these

feature, you need to set the SU200 for an external MIDI clock (using Job mode) and you need to con-

nect a MIDI clock device to the SU200’s MIDI IN connector.

Quick Start

ENGLISH

Applying Effects or Filter to Realtime Audio Input

The “Audio In” feature lets you pass sound from a CD player, MD player, or other audio device

through the SU200. You can switch the sound throughput on and off, and mix it with playback from

sample pads 1 to 8. You are also free to apply an effect or ﬁlter to the sound as it passes through the

SU200.

Make the necessary connections.

Switch off the SU200 and connect up a CD player or other audio source device. Also connect up an

audio output device such as powered speakers or headphones. (See page 10.)

Switch on the power to the audio devices and to the SU200.

Start playback from the audio input device, and the press the AUDIO IN pad on the

SU200.

Try using the EFFECT CONTROL knobs and ribbon controller to control the effect

applied to the sound as it passes through the SU200.

Use the knobs and ribbon controller in the same way as described on page 17 (the same way you use

them with pads 1 to 8).

• Loop Remix, Slice, scratch, and realtime tempo change ([TIME]) do not work on audio input.

• Remember that effects do not operate during playback of high-grade samples

PHONES MIC INPUT MIDI IN

REC TRGLVLDATA

EFFECT

CONTROL

VOLUME

TYPE

LFO

LO-FI

DELAY LEVEL

RESONANCE

VARI

GATE TIME

MOD SPEED

DRIVE

TIME

CUTOFF

3.3V

CARD

DC INLINE INPUT

L R

STEREO OUTPUT

L R

BANK

JOB EXIT

RESMPL

REC

BPM

NORMAL

REVERSE

START

POINT

END

POINT

CLEAR

START

STOP

SLICE

DELAY FILTER SCRATCH

SCALE

PAD

TIME STRETCH COPY PAD VOL SAVE DELETE MIDILOAD

CARD

TIME

DIST/

LO-FI

LOOP

REMIX

TECH

MOD

DELETE

EXTRACT

ONE SHOT

LOOP

GRADE

GATE

TRIGGER

STEREO/MONO

–1/NO

1/YES

BANK BANK

STANDBY

SAMPLING UNIT

EFFECT TYPE

LOOP REMIX

SLICE

TECHMOD

DIST/LO-FI

DELAY

FILTER

8888888

~~~~~~

~~~~~

LOOP TR

PLAY

PAD PLAY Play PAD 1 8

LOOP TRACK PLAY

Select

EFFECT LOOP REMIX Turn KNOB 1,2

Play PAD 1 8

Press LOOP TR PLAY Button

EFFECTS

under the knobs

Select

BANK A C

PHONES MIC INPUT MIDI IN

REC TRGLVLDATA

EFFECT

CONTROL

VOLUME

TYPE

LFO

LO-FI

DELAY LEVEL

RESONANCE

VARI

GATE TIME

MOD SPEED

DRIVE

TIME

CUTOFF

3.3V

CARD

DC INLINE INPUT

L R

STEREO OUTPUT

L R

BANK

JOB EXIT

RESMPL

REC

BPM

NORMAL

REVERSE

START

POINT

END

POINT

CLEAR

START

STOP

SLICE

DELAY FILTER SCRATCH

SCALE

PAD

TIME STRETCH COPY PAD VOL SAVE DELETE MIDILOAD

CARD

TIME

DIST/

LO-FI

LOOP

REMIX

TECH

MOD

DELETE

EXTRACT

ONE SHOT

LOOP

GRADE

GATE

TRIGGER

STEREO/MONO

–1/NO

1/YES

BANK BANK

STANDBY

SAMPLING UNIT

EFFECT TYPE

LOOP REMIX

SLICE

TECHMOD

DIST/LO-FI

DELAY

FILTER

8888888

~~~~~~

~~~~~

LOOP TR

PLAY

PAD PLAY Play PAD 1 8

LOOP TRACK PLAY

Select

EFFECT LOOP REMIX Turn KNOB 1,2

Play PAD 1 8

Press LOOP TR PLAY Button

EFFECTS

under the knobs

Select

BANK A C

Audio Input

(Source sound)

Sound from the audio source passes through the SU200

and out to the speakers.

You can stop the sound throughput by pressing the AUDIO

IN pad once again. (Each press toggles throughput on or

off.)

Audio Input

(Source sound)

REC TRGLVLDATA

EFFECT

CONTROL

NOTE

Quick Start

Recording a Sample

Now try taking a sample of your own voice, and then playing it back by pressing the pad.

Connect a microphone to the MIC INPUT jack. (See page 10.)

Switch memory protection off. (See page 51.)

C Switch off all pads, and then press the [REC] button to enter Sampling mode.

• You can escape from Sampling mode by pressing the [EXIT] button.

V Press the pad into which you want to record your new sample.

• If a sample is already recorded on the pad you select, the display asks whether to delete (over-

write) it. The message takes the form Delete B-1?, where the letter indicates the selected

bank (A, B, or C) and the number indicates the selected pad (1 to 8). Press [+1/YES] to delete

the existing sample and continue with recording, or press [-1/NO] to cancel and retain the

existing sample.

PHONES

MIC INPUT

REC

Which 

Pad?

NOTE

BANK

RESMPL REC

NORMAL

REVERSE

START

POINT

END

POIN

ONE SHOT

LOOP

GRADE

GATE

TRIGGER

STEREO/MONO

BANK BANK

LOOP TR

PLAY

Press 

Start

NOTE

Pagina se încarcă ...

Yamaha SU200 Manualul proprietarului

Marca: Yamaha

Model: SU200

Categorie: Instrumente muzicale

Tip: Manualul proprietarului

Descărcați PDF

raport

în alte limbi

Türkçe: Yamaha SU200 El kitabı
français: Yamaha SU200 Le manuel du propriétaire
čeština: Yamaha SU200 Návod k obsluze
русский: Yamaha SU200 Инструкция по применению
English: Yamaha SU200 Owner's manual
suomi: Yamaha SU200 Omistajan opas
polski: Yamaha SU200 Instrukcja obsługi
Deutsch: Yamaha SU200 Bedienungsanleitung
italiano: Yamaha SU200 Manuale del proprietario
español: Yamaha SU200 El manual del propietario
svenska: Yamaha SU200 Bruksanvisning
dansk: Yamaha SU200 Brugervejledning
português: Yamaha SU200 Manual do proprietário
Nederlands: Yamaha SU200 de handleiding

Lucrări conexe

Alte documente

Hach AS950 Basic Installation And Maintenance