Yamaha DSP-1 Manual de utilizare

OWNER’S MANUAL

MODE D’EMPLOI

OWNER’S MANUAL

MODE D’EMPLOI

U C A

NATURAL SOUND AV AMPLIFIER DSP A1

CINEMA DSP

7ch

VOLUME

INPUT SELECTOR

TAPE 2 MON

/EXT. DECODER

l6

20

28

40

60

l2

8

4

2

0

–dB

PHONES BASS

EXTENSION

BASS TREBLE BALANCE

DVD/VCR 3

VIDEO AUX

REC OUT

VCR 1

VCR 2

TV/DBS

LD

SOURCE

CD

MD/TAPE 1

VIDEO AUX

SET MENU PROGRAM EFFECT

STANDBY/ON

55

4

3

2

l

0

l

2

3

4

LR

55

4

3

2

l

0

l

2

3

4

55

4

3

2

l

0

l

2

3

4

1 Read Instructions – All the safety and operating

instructions should be read before the unit is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the unit and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and other instructions

should be followed.

5 Water and Moisture – The unit should not be used near

water – for example, near a bathtub, washbowl, kitchen

sink, laundry tub, in a wet basement, or near a swimming

pool, etc.

6 Carts and Stands – The unit should be used only with a

cart or stand that is recommended by the manufacturer.

6A A unit and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause

the unit and

cart combination to overturn.

7 Wall or Ceiling Mounting – The unit

should be mounted to a wall or ceiling only as

recommended by the manufacturer.

8 Ventilation – The unit should be situated so that its

location or position does not interfere with its proper

ventilation. For example, the unit should not be situated

on a bed, sofa, rug, or similar surface, that may block the

ventilation openings; or placed in a built-in installation,

such as a bookcase or cabinet that may impede the flow

of air through the ventilation openings.

9 Heat – The unit should be situated away from heat

sources such as radiators, stoves, or other appliances

that produce heat.

10 Power Sources – The unit should be connected to a

power supply only of the type described in the operating

instructions or as marked on the unit.

11 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the unit.

12 Cleaning – The unit should be cleaned only as

recommended by the manufacturer.

13 Nonuse Periods – The power cord of the unit should be

unplugged from the outlet when left unused for a long

period of time.

14 Object and Liquid Entry – Care should be taken so that

objects do not fall into and liquids are not spilled into the

inside of the unit.

15 Damage Requiring Service – The unit should be serviced

by qualified service personnel when:

A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled into the

unit; or

C. The unit has been exposed to rain; or

D. The unit does not appear to operate normally or

exhibits a marked change in performance; or

E. The unit has been dropped, or the cabinet damaged.

16 Servicing – The user should not attempt to service the unit

beyond those means described in the operating

instructions. All other servicing should be referred to

qualified service personnel.

17 Power Lines – An outdoor antenna should be located

away from power lines.

18 Grounding or Polarization – Precautions should be taken

so that the grounding or polarization is not defeated.

SAFETY INSTRUCTIONS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

•

Explanation of Graphical Symbols

CAUTION

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

IMPORTANT

Please record the serial number of this unit in

the space below.

Model:

Serial No.:

The serial number is located on the rear of

the unit.

Retain this Owner’s Manual in a safe place

for future reference.

1

English

SPECIAL NOTES FOR FCC COMPOSITE DEVICE (for US customers only)

This device is a composite system. The digital device component may not cause harmful interference.

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to

use the product.

2. IMPORTANT : When connecting this product to

accessories and/or another product use only high quality

shielded cables. Cable/s supplied with this product

MUST be used. Follow all installation instructions.

Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE : This product has been tested and found to

comply with the requirements listed in FCC Regulations,

Part 15 for Class “B” digital devices. Compliance with

these requirements provides a reasonable level of

assurance that your use of this product in a residential

environment will not result in harmful interference with

other electronic devices.

This equipment generates/uses radio frequencies and, if

not installed and used according to the instructions

found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this product

is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try

to eliminate the problem by using one of the following

measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

FCC INFORMATION (for US customers only)

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the

sound come through loud and clear without annoying blaring

or distortion – and, most importantly, without affecting your

sensitive hearing.

Since hearing damage from loud sounds is often

undetectable until it is too late, YAMAHA and the

Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

We Want You Listening For A Lifetime (for US customers only)

After unpacking, check that the following parts are included.

SUPPLIED ACCESSORIES

Remote Control Transmitter Batteries (size AA, R6, UM-3)

User function stickers

2

CONTENTS

Thank you for selecting this YAMAHA AV Amplifier.

SAFETY INSTRUCTIONS

...................................................... Inside of the Front Cover

SUPPLIED ACCESSORIES ............................................... 1

FEATURES ........................................................................... 3

CAUTION .............................................................................. 3

NOTES ABOUT THE REMOTE CONTROL

TRANSMITTER .................................................................... 4

PROFILE OF THIS UNIT ..................................................... 5

SPEAKER SETUP ............................................................... 8

CONNECTIONS ................................................................. 10

CONNECTING AUDIO/VIDEO SOURCE EQUIPMENT

TO THIS UNIT..................................................................... 10

CONNECTING SPEAKERS.............................................. 18

PLUGGING IN THIS UNIT................................................. 22

CONTROLS AND THEIR FUNCTIONS ......................... 23

FRONT PANEL................................................................... 23

DISPLAY PANEL ................................................................ 25

ADJUSTMENTS BEFORE USING THIS UNIT ............. 26

SELECTING THE OUTPUT MODES SUITABLE FOR

YOUR SPEAKER SYSTEM (IN THE “SET MENU” MODE)

............................................................................................... 26

SPEAKER BALANCE ADJUSTMENT............................. 29

ADJUSTMENTS IN THE “SET MENU” MODE ............ 32

BASIC OPERATIONS ....................................................... 39

TO PLAY A SOURCE......................................................... 39

TO RECORD A SOURCE TO TAPE (OR MD)

(OR DUBBING FROM A TAPE TO ANOTHER)............. 42

FOR SOUND CONTROL ON THIS UNIT........................ 44

USING DIGITAL SOUND FIELD PROCESSOR (DSP)

.............................................................................................. 45

PLAYING A SOURCE WITH AN EFFECT OF THE

DIGITAL SOUND FIELD PROCESSOR (DSP) .............. 45

ADJUSTING OUTPUT LEVEL OF THE CENTER, RIGHT

REAR, LEFT REAR, FRONT EFFECT SPEAKERS AND

SUBWOOFER .................................................................... 48

BRIEF OVERVIEW OF DIGITAL SOUND FIELD

PROGRAMS ....................................................................... 50

ON SCREEN DISPLAY .................................................... 55

CREATING YOUR OWN SOUND FIELDS .................... 56

SELECTING AND EDITING PROGRAM PARAMETERS

............................................................................................... 57

DESCRIPTIONS OF THE DIGITAL SOUND FIELD

PARAMETERS ................................................................... 58

SETTING THE SLEEP TIMER ......................................... 61

REMOTE CONTROL TRANSMITTER ........................... 62

BASIC OPERATIONS (When the lid is open) ................. 62

LEARNING NEW CONTROL FUNCTIONS

(When the lid is open).......................................................... 64

USING OPERATION CONTROL KEYS

(When the lid is closed) ...................................................... 66

MACRO OPERATIONS (When the lid is closed) ............ 68

LEARNING A NEW FUNCTION ....................................... 70

MAKING A NEW MACRO ................................................. 71

CLEARING LEARNED FUNCTIONS .............................. 72

TROUBLESHOOTING ...................................................... 73

SPECIFICATIONS ............................................................. 76

3

English

●

7 Speaker Configuration

Main: 110W + 110W (8Ω) RMS Output

Power, 0.015% THD, 20–20,000 Hz

Center: 110W (8Ω) RMS Output Power,

0.015% THD, 20–20,000 Hz

Rear: 110W + 110W (8Ω) RMS Output

Power, 0.015% THD, 20–20,000 Hz

Front: 35W + 35W (8Ω) RMS Output

Power, 0.05% THD, 1 kHz

●

Digital Sound Field Processor

●

Dolby Digital (AC-3) Decoder

●

Dolby Pro Logic Surround Decoder

●

DTS Decoder

●

CINEMA DSP: Theater-like Sound

Experience by the Combination of

YAMAHA DSP Technology and Dolby

Surround or DTS

●

Automatic Input Balance Control for

Dolby Pro Logic Surround

●

Test Tone Generator for Easier Speaker

Balance Adjustment

●

Speaker Output Mode Changing

Capability

●

“SET MENU” Mode which Provides You

with 12 Titles of Setting Changes and

Adjustments for Using This Unit in the

Best Condition in Your Audio/Video

System

● BASS EXTENSION Switch for Reinforcing

Bass Response

● On Screen Display Function Helpful in

Controlling This Unit

●

REC OUT Selector which is Independent of

Input Source Selection

● SLEEP Timer

●

Digital Audio Signal Terminals:

5 OPTICAL Inputs, 3 COAXIAL Inputs,

1 DOLBY DIGITAL (AC-3) RF Input,

1 OPTICAL Output

●

6 Channel Audio Signal Input Terminals for

Connecting with an External Audio Signal

Decoder etc.

● Video Signal Input/Output Capability

(Including S Video Connections)

●

“Learning” Remote Control Transmitter

FEATURES

1. To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2. Install this unit in a cool, dry, clean place – away from

windows, heat sources, sources of excessive vibration,

dust, moisture and cold. Avoid sources of humming

(transformers, motors). To prevent fire or electrical shock,

do not expose the unit to rain or water.

3. Never open the cabinet. If something drops into the set,

contact your dealer.

4. Do not use force on switches, controls or connection wires.

When moving the unit, first disconnect the power plug and

the wires connected to other equipment. Never pull the

wires themselves.

5. The openings on the cabinet assure proper ventilation of

the unit. If these openings are obstructed, the temperature

inside the cabinet will rise rapidly. Therefore, avoid placing

objects against these openings, and install the unit in well-

ventilated condition. Make sure to allow a space of at least

10 cm behind, 10 cm on the both sides and 30 cm above

the top panel of the unit. Otherwise it may not only damage

the unit, but also cause fire.

6. The voltage to be used must be the same as that specified

on this unit. Using this unit with a higher voltage than that

which is specified is dangerous and may result in a fire or

other type of accident causing damage. YAMAHA will not

be held responsible for any damage resulting from use of

this unit with a voltage other than that which is specified.

7. Digital signals generated by this unit may interfere with

other equipment such as tuners, receivers or TVs. Move

this unit farther away from such equipment if interference

is observed.

8. Always set the VOLUME control to “–

∞

” before starting

the audio source play. Increase the volume gradually to an

appropriate level after playback has been started.

9. Do not attempt to clean the unit with chemical solvents;

this might damage the finish. Use a clean, dry cloth.

10.Be sure to read the “TROUBLESHOOTING” section

regarding common operating errors before concluding that

the unit is faulty.

11.When not planning to use this unit for long periods of time

(ie., vacation, etc.), disconnect the AC power plug from the

wall outlet.

12.To prevent lightning damage, disconnect the AC power

plug and antenna cable when there is an electrical storm.

13.Grounding or polarization – Precautions should be taken

so that the grounding or polarization of an appliance is not

defeated.

14.Do not connect an audio equipment to the AC outlet on the

rear panel if the equipment requires more power than the

outlet is rated to provide.

CAUTION : READ THIS BEFORE OPERATING YOUR UNIT.

4

This unit is not disconnected from the AC power source as

long as it is connected to the wall outlet, even if this unit

itself is turned off. This state is called the standby mode.

In this state, this unit is designed to consume a very small

quantity of power.

Voltage Selector (China and General Models only)

The voltage selector on the rear panel of this unit must

be set for your local main voltage BEFORE plugging into

the AC main supply.

Voltages are 110/120/220/240 V AC, 50/60 Hz.

FREQUENCY STEP switch (China and General Models

only)

Because the interstation frequency spacing differs in

different areas, set the FREQUENCY STEP switch (located

at the rear) according to the frequency spacing in your area.

Before setting this switch, disconnect the AC power plug of

this unit from the AC outlet.

FOR CANADIAN CUSTOMERS

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT AND FULLY INSERT.

THIS CLASS B DIGITAL APPARATUS MEETS ALL

REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS.

WARNING

Do not change the IMPEDANCE SELECTOR switch

setting while the power to this unit is on, otherwise this

unit may be damaged.

IF THIS UNIT FAILS TO TURN ON WHEN THE

STANDBY/ON SWITCH IS PRESSED;

The IMPEDANCE SELECTOR switch may not be set to

either end closely. If so, set the switch to either end closely.

Battery installation

Battery replacement

If you find that the remote control transmitter must be used

closer to the main unit, the batteries are weak. Replace both

batteries with new ones.

Notes

●

Use only AA, R6, UM-3 batteries for replacement.

●

Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

●

Remove the batteries if the remote control transmitter will

not be used for an extended period of time.

●

If batteries leak, dispose of them immediately. Avoid

touching the leaked material or letting it come in contact with

clothing, etc. Clean the battery compartment thoroughly

before installing new batteries.

●

After you change batteries, make sure to press the RESET

button inside the battery compartment.

Remote control transmitter operation range

Notes

●

There should be no large obstacles between the remote

control transmitter and the main unit.

●

If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.),

it might cause the remote control transmitter not to work

correctly. In this case, reposition the main unit to avoid direct

lighting.

30°

Remote control

sensor

Within approximately

6 m (19.7 feet)

1

3

2

NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

AC OUTLETS

SWITCHED

I00W MAX. TOTAL

200W MAX.

UNSWITCHED

IMPEDANCE SELECTOR

: 4

Ω

MIN. /SPEAKER

A B : 4

Ω

MIN. /SPEAKER

A OR B : 4

Ω

MIN. /SPEAKER

: 4

Ω

MIN. /SPEAKER

EFFECT : 6

Ω

MIN. /SPEAKER

SET BEFORE POWER ON

MAIN

CENTER

REAR

FRONT

: 8

Ω

MIN. /SPEAKER

A B : 4

Ω

MIN. /SPEAKER

A OR B : 8

Ω

MIN. /SPEAKER

: 8

Ω

MIN. /SPEAKER

EFFECT : 8

Ω

MIN. /SPEAKER

MAIN

CENTER

REAR

FRONT

A B

A OR B

+

FRONT REAR

(SURROUND)

VOLTAGE SELECTOR

IMPEDANCE SELECTOR

(General model)

5

English

PROFILE OF THIS UNIT

This unit incorporates a sophisticated, multi-program digital

sound field processor. The processor allows you to

electronically expand and change the shape of the audio sound

field from both audio and video sources, creating a theater-like

experience in your listening room. This unit has a total of 12

digital sound field processor (DSP) modes. You can create an

excellent audio sound field by selecting a suitable sound field

(this will, of course, depend on what you will be listening to),

and adding desired adjustments.

In addition, this unit incorporates a Dolby Pro Logic Surround

decoder and Dolby Digital (AC-3) decoder for multi-channel

sound reproduction of Dolby Surround encoded video sources,

and a DTS decoder for multi-channel sound reproduction of DTS-

encoded audio and video sources. The operation of the Dolby

Pro Logic Surround, Dolby Digital (AC-3) or DTS decoder can be

controlled by selecting a corresponding DSP program including

combined operations of DSP and Dolby Pro Logic Surround, DSP

and Dolby Digital (AC-3), or DSP and DTS.

This unit also features a built-in automatic input balance

control. This always assures you the best performance without

manual adjustment.

Digital Sound Field Processing

What is it that makes live music so good? Today’s advanced

sound reproduction technology lets you get extremely close to

the sound of a live performance, but chances are you’ll still

notice something missing, the acoustic environment of the live

concert hall. Extensive research into the exact nature of the

sonic reflections that create the ambience of a large hall has

made it possible for Yamaha engineers to bring you this same

sound in your own listening room, so you’ll feel all the sound of

a live concert.

Furthermore, our technicians, armed with sophisticated

measuring equipment, have even made it possible to capture

the acoustics of a variety of actual concert halls, jazz clubs,

theaters, etc. from around the world, to allow you to accurately

recreate any one of these live performance environments, all in

your own home.

Dolby Pro Logic Surround

This unit employs a Dolby Pro Logic Surround decoder similar

to professional Dolby Stereo decoders used in many movie

theaters. By using the Dolby Pro Logic Surround decoder, you

can experience the dramatic realism and impact of Dolby

Stereo theater sound in your own home.

Dolby Pro Logic employs a four-channel-five-speaker system.

The Pro Logic Surround system divides the input signal into

four levels: the left and right main channels, the center channel

(used for dialog), and the rear surround sound channel (used

for sound effects, background noise, and other ambient

noises). The center channel allows listeners seated in even

less-than-ideal positions to hear the dialog originating from the

action on the screen while experiencing good stereo imaging.

Dolby Surround is encoded on a lot of sound tracks of pre-

recorded video tapes, laserdiscs, and some TV/cable

broadcasts. When you play a source encoded with Dolby

Surround on this unit, the Dolby Pro Logic Surround decoder

decodes the signal and distributes the surround-sound effects.

Dolby Digital (AC-3)

Dolby Digital (AC-3) is a new generation of Dolby Surround

sound system which is a spatial sound processing format

developed for 35 mm film-movies by employing low bit-rate

audio coding.

Dolby Digital (AC-3) is a digital surround sound system that

provides completely independent multi-channel audio to

consumers. In multi-channel form, Dolby Digital (AC-3)

provides five full range channels in what is sometimes referred

to as a “3/2” configuration: three front channels (left, center and

right), plus two surround channels. A sixth bass-only effect

channel is also provided for output of LFE (low frequency

effect), or low bass effects that are independent of other

channels. (This is called the “subwoofer channel” or “LFE

channel”.) This channel is counted as 0.1, thus giving rise to

the term 5.1 channels in total.

Compared to Dolby Pro Logic that is referred to a “3/1” system

(left front, center, right front and just one surround channel),

Dolby Digital (AC-3) features two surround channels, called

stereo or split surrounds, each offering the same full range

fidelity as the three front channels.

By using the built-in Dolby Digital (AC-3) decoder, you can

experience the dramatic realism and impact of Dolby Stereo

Digital theater sound in your own home.

Sound of wide dynamic range reproduced by the five full range

channels presents listeners much excitement that has never

been experienced before. Precise sound orientation by the

discrete digital sound processing expands realism that the

original movie possesses.

The DTS (Digital Theater Systems) system was developed to

replace analog soundtracks of movies with six discrete

channels of digital soundtracks, and now, it is installed in many

theaters around the world. The DTS digital playback system

changed the way we experienced movies in theaters with six

discrete channels of superb digital audio.

The DTS technology, through intense research and

development, made it possible to deliver a similar

encode/decode discrete technology to home audio surround-

sound entertainment.

The DTS Digital Surround is an encode/decode system which

delivers six channels of master-quality, 20-bit audio; technically

5.1 channels, which means 5 full-range (left, center, right and

two surround) channels, plus a subwoofer (LFE) channel (as

“0.1”). It is compatible with the 5.1 speaker configurations that

are currently available for home theater systems

The DTS Digital Surround algorithm is designed to encode the

six channels of 20-bit audio onto any laserdisc or compact disc

(or DVD in the near future) with considerably less data-

compression.

By using the DTS decoder built into this unit, you can

experience the dramatic realism and impact of the DTS

installed theater’s high quality sound in your own home.

Laserdisc and compact disc (and DVD in the near future) are

home audio format within which DTS can represent its high

quality multi-channel audio. (In addition to movies on

laserdiscs, many exciting new multi-channel music recordings

will also become available in the form of DTS-encoded

compact discs.)

Manufactured under license from DTS Technology LLC.

Additionally licensed under the following US Patent 5,451,942

& National Patent applications derived from PCT/US95/00959.

Additional U.S. and Foreign Patents pending. “DTS”, “digital

surround”, and “coherent acoustics” logos are trademarks of

6

Dolby Digital (AC-3) forms 5.1 channels as mentioned on the

previous page, and moreover, it can also form fewer channels,

for example 2 channel stereo and monaural. You may be able

to find some 2 channel stereo and/or monaural sources

encoded with the Dolby Digital (AC-3) in a market.

If a 2 channel stereo source encoded with the Dolby Digital

(AC-3) is played back as the input source and the DSP

program No. 10, 11 or 12 is used at the same time, the source

is first decoded with the Dolby Digital (AC-3) decoder into 2

channels, and then decoded with the Dolby Pro Logic decoder.

In such a case, only the decoding of Dolby Pro Logic is shown

on the display panel of this unit.

Laserdisc and DVD are home audio formats that could benefit

from Dolby Digital (AC-3). In the near future, Dolby Digital (AC-

3) will also be applied to DBS, CATV and HDTV. The ongoing

release of Dolby Stereo Digital theatrical films now underway

will provide an immediate source of Dolby Digital (AC-3)

encoded video software.

Manufactured under license from Dolby Laboratories Licensing

Corporation. “Dolby”, “AC-3”, “Pro Logic”, and the double-D

symbol are trademarks of Dolby Laboratories Licensing

Corporation.

DTS Digital Surround

7

English

Dolby Pro Logic + 2 Digital Sound Fields

Digital sound fields are created on the presence side and

the rear surround side of the Dolby Pro Logic Surround-

decoded sound field respectively. They create a wide

acoustic environment and emphasize surround-effect in the

room, letting you feel much presence as if you were

watching a movie in a popular Dolby Stereo theater.

This combination is available when the digital sound field

program No. 7, 8, 9, 10, 11 or “PRO LOGIC/Enhanced” of

No. 12 is selected, and the input signal of source is analog,

PCM audio or encoded with the Dolby Digital (AC-3) in 2-

channels.

Dolby Digital (AC-3) or DTS + 3 Digital Sound

Fields

Digital sound fields are created on the presence side and

the independent left and right surround sides of the Dolby

Digital (AC-3)-decoded or the DTS-decoded sound field

respectively. They create a wide acoustic environment and

much surround effect in the room without losing high

channel separation. With wide dynamic range of Dolby

Digital (AC-3) or DTS sound, this sound field combination

lets you feel as if you were watching a movie in the newest

Dolby Stereo Digital theater or DTS installed theater. This

will be the most ideal home theater sound at the present

time.

This combination is available when the digital sound field

program No. 7, 8, 9, 10, 11 or “DOLBY DIGITAL (or DTS

DIGITAL SUR.)/Enhanced” of No. 12 is selected, and the

input signal of source is encoded with the Dolby Digital (AC-

3) (except in 2-channels) or encoded with the DTS.

CINEMA DSP: Dolby Surround + DSP / DTS + DSP

Dolby Surround sound system and DTS system show their full

ability in a large movie theater, because movie sounds are

originally designed to be reproduced in a large movie theater

using many speakers. It is difficult to create a sound

environment similar to that of a movie theater in your listening

room, because the room size, materials of inside walls, the

number of speakers, etc. of your listening room are much

different from those of a movie theater.

Yamaha DSP technology made it possible to present you with

nearly the same sound experience as that of a large movie

theater in your listening room by compensating for lack of

presence and dynamics in your listening room with its original

digital sound fields combined with Dolby Surround sound or

DTS Digital Surround sound.

The YAMAHA “CINEMA DSP” logo indicates those programs

are created by the combination of YAMAHA DSP technology

and Dolby Surround or DTS.

CINEMA DSP

8

This unit has been designed to provide the best sound field

quality with a full seven-speaker system setup, using a pair of

main speakers to output main source sounds, two extra pairs

of effect speakers to generate the sound field plus one center

speaker for dialog. We therefore recommend that you use a

seven-speaker setup. A four-speaker system using only one

pair of effect speakers for the sound field will still provide

impressive ambience and effects, however, and may be a

good way to begin with this unit. You can always upgrade to

the full seven-speaker system later. In the 4 or 5 speaker

system, the Digital Sound Field Processing is still performed,

but the main speakers are used for both the main channels

and the front effect channels.

Use of the Center Dialog Speaker Is

Recommended

When playing back a source with the Dolby Pro Logic

decoded, or playing back a source which contains center-

channel signals with the Dolby Digital (AC-3) or the DTS

decoded, dialog, vocals etc. are output from the center

channel. Therefore, if you want to maximize the performance

of your Audio/Video home theater system, it is recommended

that you use a center channel speaker.

If for some reason it is not practical to use a center speaker, it

is possible to enjoy movie viewing without it. Best results,

however, are obtained with the full system.

Use of a Subwoofer Expands Your Sound

Field

It is also possible to further expand your system with the

addition of a subwoofer and amplifier. The use of a subwoofer

is effective not only for reinforcing bass frequencies from any

or all channels, but also for reproducing signals at the

subwoofer channel with high fidelity during playing back a

source with the Dolby Digital (AC-3) or the DTS decoded. You

may wish to choose the convenience of a Yamaha Active

Servo Processing Subwoofer System, which has its own built-

in power amplifier.

SPEAKER SETUP

Speakers and Speaker Placement

Your full seven-speaker system will require three speaker

pairs: the MAIN SPEAKERS (your normal stereo speakers),

the FRONT EFFECT SPEAKERS and the REAR SPEAKERS,

plus the CENTER SPEAKER. You may also be using a

SUBWOOFER.

The MAIN SPEAKERS should be high performance models

and have enough power handling capacity to accept the

maximum output of your audio system.

Other speakers do not have to be equal to the MAIN

SPEAKERS. For precise sound localization, however, it is

ideal to use high performance models that can reproduce

sounds in full range for the CENTER SPEAKER, the FRONT

EFFECT and REAR SPEAKERS.

Place the MAIN SPEAKERS in the normal position.

Place the FRONT EFFECT SPEAKERS further apart than the

MAIN SPEAKERS, on either side of and 0.5–1m behind and

above the MAIN SPEAKER pair.

Place the REAR SPEAKERS behind your listening position.

They should be nearly 1.8m up from the floor.

Place the CENTER SPEAKER precisely between the two

MAIN SPEAKERS. (To avoid interference, keep the speaker

above or below the television monitor, or use a magnetically

shielded speaker.)

If using a SUBWOOFER, such as a Yamaha Active Servo

Subwoofer System, the position of the speaker is not so critical

because low bass tones are not highly directional.

Setting Up Your Speaker System

Main speaker

Front effect speaker

Center speaker

Rear speaker

Subwoofer

9

English

4 Speaker System

Simplest system.

You can enjoy widely diffused sound by only adding two

additional speaker units at the rear.

1E. FRONT MIX—Set to ON-5ch. (See page 27.)

1A. CENTER SP—Set to NONE. (See page 26.)

6 Speaker System

Good for sound fields from 2-channel stereo sources.

When a normal stereo source is played back with the sound

field programs No. 1 through No. 6, a sound effect matching

that of a 7-speaker system can be obtained. The addition of

front left and right effect speakers produces a more effective

sound field.

1E. FRONT MIX—Set to OFF-7ch. (See page 27.)

1A. CENTER SP—Set to NONE. (See page 26.)

5 Speaker System

Good for Audio/Video sources.

By the use of center speaker, center sounds (dialog, vocals

etc.) are precisely localized.

1E. FRONT MIX—Set to ON-5ch. (See page 27.)

1A. CENTER SP—Set to LRG or SML. (See page 26.)

7 Speaker System

This is the recommended speaker system, providing the

best sound effects.

The rear speakers and the front effect speakers produces a

360-degree sound field, and the center speaker provides

precise center localization.

You can experience the amazing YAMAHA “CINEMA DSP”

sound fields completely with the 7 speaker system.

1E. FRONT MIX—Set to OFF-7ch. (See page 27.)

1A. CENTER SP—Set to LRG or SML. (See page 26.)

Four Possible Types of Speaker System Configurations Recommended

10

CONNECTIONS

Never plug in this unit and other components until all connections are completed.

When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left)

to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this unit.

CONNECTING AUDIO/VIDEO SOURCE EQUIPMENT TO THIS UNIT

For connections with audio/video units, use RCA type pin plug cables with the exception described later.

* If you have YAMAHA audio/video units numbered as 1, 2, 3, etc. on the rear panel, connections can be made easily only by

connecting the output (or input) terminals of each unit to the same-numbered terminals of this unit.

MAIN

FRONT

LD

VIDEO S VIDEO

TV/DBS

IN

VCR 1

OUT

IN

VCR 2

OUT

IN

DVD/

VCR 3

OUT

MONITOR

OUT

DVD/VCR 3 OUT

CAN BE USED AS A SECOND

MONITOR OUT, IF SELECTED

BY SET MENU.

VIDEO SIGNALAUDIO SIGNALAUDIO SIGNAL

GND

PHONO

1

CD

2

TUNER

3

PLAY

4

REC

MD/TAPE 1

3

PLAY

4

REC

TAPE 2

EXTERNAL DECODER INPUT

MAIN

SUB

WOOFER

CENTER

SURROUND

CD

TV/DBS

DVD/

VCR 3

COAXIAL

OPTICAL

CD

PLAY

REC

MD/TAPE 1

LD

TV/DBS

DVD/

VCR 3

DIGITAL SIGNAL

PAL NTSC

OUTPUT

GND

OUTPUT

LINE OUT

LINE IN

LINE OUT

LINE IN

LD

DIGITAL

(AC-3) RF SIGNAL

(General model)

Tuner

Turntable

MD recorder,

Tape deck 1, etc.

CD player

Tape deck 2

BASIC CONNECTIONS (for Audio Units)

GND terminal (For turntable use)

Connecting the ground wire of the turntable to the GND

terminal will normally minimize hum, but in some cases

better results may be obtained with the ground wire

disconnected.

*

1

:

*

1

11

English

(General model)

LD player

Monitor TV

BASIC CONNECTIONS (for Video Units)

Video cassette recorder 2

DVD player or

video cassette recorder 3

MAIN

FRONT

LD

VIDEO S VIDEO

TV/DBS

IN

VCR 1

OUT

IN

VCR 2

OUT

IN

DVD/

VCR 3

OUT

MONITOR

OUT

DVD/VCR 3 OUT

CAN BE USED AS A SECOND

MONITOR OUT, IF SELECTED

BY SET MENU.

VIDEO SIGNALAUDIO SIGNALAUDIO SIGNAL

GND

PHONO

1

CD

2

TUNER

3

PLAY

4

REC

MD/TAPE 1

3

PLAY

4

REC

TAPE 2

EXTERNAL DECODER INPUT

MAIN

SUB

WOOFER

CENTER

SURROUND

LD

CD

TV/DBS

DVD/

VCR 3

COAXIAL

OPTICAL

DIGITAL

(AC-3) RF SIGNAL

CD

PLAY

REC

MD/TAPE 1

LD

TV/DBS

DVD/

VCR 3

DIGITAL SIGNAL

PAL NTSC

VIDEO IN

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

AUDIO OUT

VIDEO OUT

AUDIO OUT

*

2

Video cassette recorder 1

TV/Satellite tuner

PAL/NTSC switch (China and General models

only)

This unit is designed for use with the NTSC and PAL

television formats. Set this switch to the position for the

format your monitor TV employs.

PAL: Outputs signals in the PAL format no matter which

format (PAL or NTSC) of video signal is sent from

an external video unit to this unit.

Set to this position if your monitor TV employs the

PAL format.

NTSC: Outputs signals in the NTSC format no matter

which format (PAL or NTSC) of video signal is sent

from an external video unit to this unit.

Set to this position if your monitor TV employs the

NTSC format.

Note

Be sure to input a video signal which employs the same

format that your monitor TV employs, otherwise a picture

will not be played back normally.

*

2

:

12

For connecting with a monitor TV that uses a 21 pin

connector for input (for Europe and U.K. models)

Make a connection as figured below with a commercially

available scart-plug connector cable.

VCR 2

OUT

IN

DVD/

VCR 3

OUT

MONITOR

OUT

DVD/VCR 3 OUT

CAN BE USED AS A SECOND

MONITOR OUT, IF SELECTED

BY SET MENU.

3

PLAY

4

REC

TAPE 2

EXTERNAL DECODER INPUT

MAIN

SUB

WOOFER

CENTER

SURROUND

PLAY

REC

MD/TAPE 1

LD

TV/DBS

DVD/

VCR 3

DIGITAL SIGNAL

VIDEO

AUDIO L

AUDIO R

Monitor TV

No connection

Scart-plug connector cable

Note

If you wish to connect a second monitor TV (or a projector) to this

unit, you can switch the DVD/VCR 3 VIDEO OUT terminal (and S

VIDEO terminal also) to a second monitor out terminal for the

connection with another monitor TV. (Refer to page 38.)

VCR 2

OUT

IN

DVD/

VCR 3

OUT

MONITOR

OUT

DVD/VCR 3 OUT

CAN BE USED AS A SECOND

MONITOR OUT, IF SELECTED

BY SET MENU.

3

PLAY

4

REC

TAPE 2

EXTERNAL DECODER INPUT

MAIN

SUB

WOOFER

CENTER

SURROUND

PLAY

REC

MD/TAPE 1

LD

TV/DBS

DVD/

VCR 3

DIGITAL SIGNAL

AUDIO OUT

S-VIDEO OUT

VIDEO OUT

S-VIDEO IN

VIDEO IN

DVD player, etc.

Projector

13

English

m Connecting to VIDEO AUX terminals (on the front panel)

These terminals are used to connect any video input source such as a camcorder to this unit.

VIDEO AUX

S VIDEO

L

R

VIDEO

VIDEO OUT

S VIDEO OUT

AUDIO OUT L

AUDIO OUT R

Camcorder

14

m Connecting to digital (OPTICAL and COAXIAL) terminals

If your CD player, MD recorder, LD player, DVD player,

TV/satellite tuner, etc. are equipped with coaxial or optical

digital audio signal output terminals, they can be connected to

this unit’s COAXIAL and/or OPTICAL digital signal input

terminals.

To make a connection between optical digital audio signal

terminals, remove the cover from each terminal, and then

connect them by using a commercially available optical fiber

cable that conforms to EIAJ standards. Other cables might not

function correctly.

Even if you connect an audio/video unit to the OPTICAL (or

COAXIAL) terminal of this unit, you must keep the unit

connected with the same named analog audio signal terminals

of this unit, because digital signal cannot be recorded by a tape

deck or VCR connected to only analog audio signal terminals

of this unit. You can switch the selection of input signals

between “digital” and “analog” easily. (See page 41 for details.)

* However, if you connect an MD recorder or DAT to this

unit’s OPTICAL MD/TAPE 1 PLAY and REC terminals, it

can record input sources connected to this unit’s OPTICAL

digital signal input terminals.

Notes

●

When you connect an audio/video unit to both of the digital

and analog terminals of this unit, make sure to connect to

both terminals of the same name.

●

Be sure to attach the covers when the OPTICAL terminals

are not being used, in order to protect the terminals from

dust.

●

All digital audio signal input terminals are applicable to the

sampling frequency of 32 kHz, 44.1 kHz and 48 kHz.

●

In order to make this unit perform a successful DTS-

decoding, the DTS bitstream must not be altered,

manipulated or corrupted in the process that it is sent from

the DIGITAL OUT terminal of a unit playing back a source

encoded with the DTS to a digital signal input terminal of

this unit.

MAIN

FRONT

LD

VIDEO S VIDEO

TV/DBS

IN

VCR 1

OUT

IN

VCR 2

OUT

IN

DVD/

VCR 3

OUT

MONITOR

OUT

DVD/VCR 3 OUT

CAN BE USED AS A SECOND

MONITOR OUT, IF SELECTED

BY SET MENU.

VIDEO SIGNALAUDIO SIGNALAUDIO SIGNAL

GND

PHONO

1

CD

2

TUNER

3

PLAY

4

REC

MD/TAPE 1

3

PLAY

4

REC

TAPE 2

EXTERNAL DECODER INPUT

MAIN

SUB

WOOFER

CENTER

SURROUND

CD

TV/DBS

DVD/

VCR 3

COAXIAL

OPTICAL

CD

PLAY

REC

MD/TAPE 1

LD

TV/DBS

DVD/

VCR 3

DIGITAL SIGNAL

PAL NTSC

OPTICAL

DIGITAL

OUT

OPTICAL

DIGITAL OUT

OPTICAL

DIGITAL OUT

COAXIAL

DIGITAL OUT

OPTICAL

DIGITAL IN

COAXIAL

DIGITAL

OUT

OPTICAL

DIGITAL

OUT

OPTICAL

DIGITAL

OUT

COAXIAL

DIGITAL

OUT

LD

DIGITAL

(AC-3) RF SIGNAL

DVD player, etc.

MD recorder,

DAT, etc.

CD player

TV/Satellite tuner LD player

(General model)

15

English

If your LD player has a DOLBY DIGITAL (AC-3) RF signal

output terminal, connect it to this unit’s DIGITAL (AC-3) RF

SIGNAL input terminal. Audio signals encoded with the Dolby

Digital (AC-3) are input to this unit by this connection.

* To play back an LD source with the Dolby Digital decoded,

set the input mode of LD to “AUTO” or “AC-3 RF”. (Refer to

page 41 for details.)

It is also necessary to connect the LD player to this unit’s

OPTICAL digital audio signal input terminal and/or analog

audio signal input terminals regardless of the DOLBY DIGITAL

(AC-3) RF signal connection, for playing back an LD source

with the Dolby Pro Logic Surround or the DTS decoded, or in

normal stereo (or monaural).

Note

DOLBY DIGITAL (AC-3) RF audio input signal cannot be

recorded by a tape deck, MD recorder or VCR. To record an

LD source, the LD player must be connected to the OPTICAL

digital audio signal input terminal and/or analog audio signal

input terminals of this unit.

m Connecting to DOLBY DIGITAL (AC-3) RF output of the LD player

MAIN

FRONT

LD

VIDEO S VIDEO

TV/DBS

IN

VCR 1

OUT

IN

VCR 2

OUT

IN

DVD/

VCR 3

OUT

MONITOR

OUT

DVD/VCR 3 OUT

CAN BE USED AS A SECOND

MONITOR OUT, IF SELECTED

BY SET MENU.

VIDEO SIGNALAUDIO SIGNALAUDIO SIGNAL

GND

PHONO

1

CD

2

TUNER

3

PLAY

4

REC

MD/TAPE 1

3

PLAY

4

REC

TAPE 2

EXTERNAL DECODER INPUT

MAIN

SUB

WOOFER

CENTER

SURROUND

LD

CD

TV/DBS

DVD/

VCR 3

COAXIAL

OPTICAL

CD

PLAY

REC

MD/TAPE 1

LD

TV/DBS

DVD/

VCR 3

DIGITAL SIGNAL

PAL NTSC

DIGITAL OUT

AUDIO OUT

VIDEO OUT

S-VIDEO OUT

DOLBY DIGITAL

(AC-3) RF

OUTPUT

DIGITAL

(AC-3) RF SIGNAL

LD player

(General model)

LD

VIDEO S VIDEO

TV/DBS

IN

VCR 1

OUT

IN

VCR 2

OUT

IN

DVD/

VCR 3

OUT

MONITOR

OUT

DVD/VCR 3 OUT

CAN BE USED AS A SECOND

MONITOR OUT, IF SELECTED

BY SET MENU.

VIDEO SIGNALAUDIO SIGNAL

S-VIDEO

OUT

VIDEO

OUT

VIDEO

OUT

S-VIDEO

OUT

VIDEO

OUT

S-VIDEO OUT

VIDEO IN

S-VIDEO IN

VIDEO IN

S-VIDEO IN

VIDEO OUT

S-VIDEO OUT

S-VIDEO IN

VIDEO IN

VIDEO OUT

S-VIDEO OUT

VIDEO IN

S-VIDEO IN

16

m Connecting to S VIDEO terminals

If your video cassette recorder, LD player, etc. and your

monitor are equipped with “S” (high-resolution) video terminals,

connect them to this unit’s S VIDEO terminals, and connect

this unit’s S VIDEO MONITOR OUT terminal to the “S” video

input of your monitor. Otherwise, connect the composite video

terminals from your video cassette recorder, LD player, etc. to

the VIDEO terminals of this unit, and connect this unit’s VIDEO

MONITOR OUT terminal to the composite video input of your

monitor.

Note

If video signals are sent to both S VIDEO input and VIDEO

input terminals, the signals will be sent to their respective

output terminals.

Notes about the Video superimpose

●

If you watch a video source that is connected to both S

VIDEO and VIDEO input terminals of this unit, signals of

screen display information are output from only the S

VIDEO MONITOR OUT terminal.

●

When no video signal is input to either S VIDEO or VIDEO

input terminals of this unit, signals of screen display

information are output from both S VIDEO MONITOR OUT

and VIDEO MONITOR OUT terminals with a color

background.

* For China and General models, if the PAL/NTSC switch

on the rear panel is set to “PAL”, nothing will be output

from either S VIDEO MONITOR OUT or VIDEO

MONITOR OUT terminal in this case.

LD player

DVD player or video

cassette recorder 3

TV/Satellite tuner

Video cassette recorder 1

Video cassette recorder 2

Monitor TV

17

English

This unit is equipped with additional 6-channel audio signal

input terminals (for left main, right main, center, left rear

surround, right rear surround and subwoofer channels)

available for inputting signals from your existing amplifier,

sound processor, decoder, etc. to this unit.

To listen to a sound by reproducing signals input to these

terminals, press the TAPE 2 MON/EXT. DECODER button on

the front panel once or more so that “EXT. DECODER IN”

appears on the display. By doing so, the signals input to these

terminals are sent to the corresponding SPEAKERS terminals

and OUTPUT terminals of this unit.

Note

When signals input to these terminals are selected, the digital

sound field processor cannot be used.

m Connecting an external sound processor, decoder, amplifier, etc. to this unit

MAIN

FRONT

LD

VIDEO S VIDEO

TV/DBS

IN

VCR 1

OUT

IN

VCR 2

OUT

IN

DVD/

VCR 3

OUT

MONITOR

OUT

DVD/VCR 3 OUT

CAN BE USED AS A SECOND

MONITOR OUT, IF SELECTED

BY SET MENU.

VIDEO SIGNALAUDIO SIGNALAUDIO SIGNAL

GND

PHONO

1

CD

2

TUNER

3

PLAY

4

REC

MD/TAPE 1

3

PLAY

4

REC

TAPE 2

EXTERNAL DECODER INPUT

MAIN

SUB

WOOFER

CENTER

SURROUND

CD

TV/DBS

DVD/

VCR 3

COAXIAL

OPTICAL

CD

PLAY

REC

MD/TAPE 1

LD

TV/DBS

DVD/

VCR 3

DIGITAL SIGNAL

PAL NTSC

SUBWOOFER OUT

SURROUND OUT

CENTER OUT

MAIN OUT

LD

DIGITAL

(AC-3) RF SIGNAL

External sound processor,

decoder, amplifier, etc.

(General model)

18

CONNECTING SPEAKERS

SPEAKERS

CAUTION

SEE INSTRUCTION MANUAL FOR CORRECT SETTING.

MAIN

FRONT

CENTER

REAR

(SURROUND)

A B

AB

A OR B

+

PRE

OUT

MAIN

IN

MAIN CH CENTER SUBWOOFER

OUT MONO

OUT IN

FRONT REAR

(SURROUND)

SPLIT

COUPLER

Center speaker

Front effect speakers

Left

Right

Left

Right

Main speakers

Rear speakers

Subwoofer system

Left

Right

Use speakers with the specified impedance shown on the

rear of this unit.

Red: positive (+)

Black: negative (–)

➀

Unscrew the knob.

➁

Insert the bare wire.

[Remove approx. 5mm

(1/4”) insulation from

the speaker wires.]

➂

Tighten the knob and

secure the wire.

<U.S.A., Canada, China, Australia and General models

only

>

Banana Plug connections are also possible. Simply insert the

Banana Plug connector into the corresponding terminal.

1

2

3

How to Connect:

Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are

faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and –

markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.

Caution

Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or

speakers.

Pagina se încarcă ...

Yamaha DSP-1 Manual de utilizare

Acest manual este potrivit și pentru

Yamaha DSP-1 Manual de utilizare

în alte limbi

Lucrări conexe