Asus PRIME A620M-K-CSM Manual de utilizare

Marca: Asus

Model: PRIME A620M-K-CSM

Categorie: Plăci de bază

Tip: Manual de utilizare

Acest manual este potrivit și pentru

PRIME A620M-K

Motherboard

PRIME A620M-K

E21945

First Edition

May 2023

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Safety information ...................................................................................................... iv

About this guide .......................................................................................................... v

Package contents ....................................................................................................... vi

PRIME A620M-K specifications summary................................................................ vi

Chapter 1: Product Introduction

1.1 Before you proceed ......................................................................................1-1

1.2 Motherboard overview .................................................................................1-2

1.3 Central Processing Unit (CPU) ....................................................................1-9

1.4 System memory ..........................................................................................1-10

Chapter 2: BIOS and RAID Support

2.1 Knowing BIOS ...............................................................................................2-1

2.2 BIOS Setup program ....................................................................................2-2

2.3 ASUS EZ Flash 3 ...........................................................................................2-3

2.4 ASUS CrashFree BIOS 3 .............................................................................. 2-4

2.5 RAID configurations .....................................................................................2-5

Appendix

Notices ..................................................................................................................... A-1

Warranty ................................................................................................................... A-5

ASUS contact information ...................................................................................... A-7

Service and Support ............................................................................................... A-7

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

• When adding or removing devices to or from the system, ensure that the power cables

for the devices are unplugged before the signal cables are connected. If possible,

disconnect all power cables from the existing system before you add a device.

• Before connecting or removing signal cables from the motherboard, ensure that all power

cables are unplugged.

• Seek professional assistance before using an adapter or extension cord. These devices

could interrupt the grounding circuit.

• Ensure that your power supply is set to the correct voltage in your area. If you are not

sure about the voltage of the electrical outlet you are using, contact your local power

company.

• If the power supply is broken, do not try to x it by yourself. Contact a qualied service

technician or your retailer.

Operation safety

• Before installing the motherboard and adding components, carefully read all the manuals

that came with the package.

• Before using the product, ensure all cables are correctly connected and the power cables

are not damaged. If you detect any damage, contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from connectors,

slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in any area

where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualied service

technician or your retailer.

• Your motherboard should only be used in environments with ambient temperatures

between 0°C and 40°C.

Button/Coin Batteries Safety Information

WARNING

KEEP OUT OF REACH OF CHILDREN

Swallowing can lead to chemical burns,

perforation of soft tissue, and death.

Severe burns can occur within 2 hours

of ingestion. Seek medical attention

immediately.

About this guide

This user guide contains the information you need when installing and conguring the

motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product Introduction

This chapter describes the features of the motherboard and the new technology it

supports. It includes descriptions of the switches, jumpers, and connectors on the

motherboard.

• Chapter 2: BIOS and RAID Support

This chapter tells how to boot into the BIOS, upgrade BIOS using the EZ Flash Utility

and support on RAID.

Where to find more information

Refer to the following sources for additional information and for product and software

updates.

1. ASUS website

The ASUS website (www.asus.com) provides updated information on ASUS hardware

and software products.

2. Optional documentation

Your product package may include optional documentation, such as warranty flyers,

that may have been added by your dealer. These documents are not part of the

standard package.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used

throughout this user guide.

CAUTION: Information to prevent damage to the components and injuries to

yourself when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

PRIME A620M-K specifications summary

CPU

AMD Socket AM5 for AMD Ryzen™ 7000 Series Desktop Processors*

Supports up to AMD 120W CPU

* Refer to www.asus.com for CPU support list.

Chipset AMD A620 Chipset

Memory

2 x DIMM slots, Max. 96GB, DDR5 Non-ECC, Un-buffered Memory*

Dual Channel Memory Architecture

Supports AMD Extended Proles for Overclocking (EXPO™)

* Supported memory types, data rate (speed), and number of DRAM modules vary

depending on the CPU and memory configuration, for more information please

refer to CPU/Memory Support list under the Support tab of product information

site or visit https://www.asus.com/support/.

* Non-ECC, un-buffered DDR5 memory supports On-Die ECC function.

Graphics

1 x VGA port

1 x HDMITM port**

Graphics specifications may vary between CPU types.

Please refer to AMD CPU

specifications.

** Supports 4K@60Hz as specified in HDMI 2.1.

Expansion Slots

AMD Ryzen™ 7000 Series Desktop Processors*

1 x PCIe 4.0 x16 slot (supports x16 mode)

AMD A620 Chipset

1 x PCIe 3.0 x1 slot

* Please check the PCIe bifurcation table on the support site

(https://www.asus.com/support/FAQ/1037507/).

Note: To ensure compatibility of the device installed, please refer to

https://www.asus.com/support/ for the list of supported peripherals.

Storage

Total supports 1 x M.2 slot and 4 x SATA 6Gb/s ports*

AMD Ryzen™ 7000 Series Desktop Processors

M.2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

AMD A620 Chipset

4 x SATA 6Gb/s ports

* AMD RAIDXpert2 Technology supports both PCIe RAID 0/1/10 and SATA RAID

0/1/10.

Ethernet 1 x Realtek 1Gb Ethernet

(continued on the next page)

Package contents

Check your motherboard package for the following items.

Motherboard 1 x PRIME A620M-K motherboard

Cables 2 x SATA 6Gb/s cables

Miscellaneous 1 x I/O Shield

1 x Screw Package for M.2 SSD

Documentation 1 x User guide

If any of the above items is damaged or missing, contact your retailer.

vii

PRIME A620M-K specifications summary

USB

Rear USB (Total 6 ports)

4 x USB 3.2 Gen 1 (5G) ports (4 x Type-A)

2 x USB 2.0 ports (2 x Type-A)

Front USB (Total 6 ports)

1 x USB 3.2 Gen 1 (5G) header supports 2 additional USB 3.2 Gen 1 ports

2 x USB 2.0 headers support 4 additional USB 2.0 ports

Audio

Realtek 7.1 Surround Sound High Definition Audio CODEC*

- Supports: Jack detection, Multi-streaming, Front Panel Jack-retasking

- Supports up to 24-Bit/192 kHz playback

Audio Features

- Audio Shielding

- Premium audio capacitors

- Dedicated audio PCB layers

* A chassis with an HD audio module in the front panel is required to support 7.1

Surround Sound audio output.

Back Panel I/O Ports

4 x USB 3.2 Gen 1 (5G) ports (4 x Type-A)

2 x USB 2.0 ports (2 x Type-A)

1 x VGA port

1 x HDMI™ port

1 x Realtek 1Gb Ethernet port

3 x Audio jacks

1 x PS/2 Keyboard/Mouse combo port

Internal I/O

Connectors

Fan and Cooling related

1 x 4-pin CPU Fan header

1 x 4-pin Chassis Fan header

Power related

1 x 24-pin Main Power connector

1 x 8-pin +12V Power connector

Storage related

1 x M.2 slot (Key M)

4 x SATA 6Gb/s ports

USB

1 x USB 3.2 Gen 1 (5G) header supports 2 additional USB 3.2 Gen 1 ports

2 x USB 2.0 headers support 4 additional USB 2.0 ports

Miscellaneous

2 x Addressable Gen 2 headers

1 x Aura RGB header

1 x Clear CMOS header

1 x COM Port header

1 x Front Panel Audio header (AAFP)

1 x S/PDIF Out header

1 x Speaker header

1 x SPI TPM header (14-1pin)

1 x 10-1 pin System Panel header

(continued on the next page)

viii

PRIME A620M-K specifications summary

Special Features

ASUS 5X PROTECTION III

- DIGI+ VRM

- LANGuard

- Overvoltage Protection

- SafeSlot Core

- Stainless-Steel Back I/O

ASUS Q-Design

- Q-DIMM

- Q-LED Core

- Q-Slot

ASUS Thermal Solution

- Aluminum heatsink design

Aura Sync

- Aura RGB header

- Addressable Gen 2 headers

Software Features

ASUS Exclusive Software

Armoury Crate

- Aura Creator

- Aura Sync

- Fan Xpert

- Power Saving

- Two-Way AI Noise Cancellation

AI Suite 3

- TurboV EVO

- DIGI+ VRM

- PC Cleaner

ASUS CPU-Z

Norton 360 Deluxe (60 Days Free Trial)

WinRAR

UEFI BIOS

ASUS EZ DIY

- ASUS CrashFree BIOS 3

- ASUS EZ Flash 3

- ASUS UEFI BIOS EZ Mode

BIOS 256 Mb Flash ROM, UEFI AMI BIOS

Manageability WOL by PME, PXE

Operating System Windows® 11, Windows® 10 64-bit

Form Factor micro-ATX Form Factor

8.9 inch x 8.7 inch (22.6 cm x 22.1 cm)

• Specications are subject to change without notice. Refer to the ASUS website for the

latest specications.

• For more information on downloading and installing drivers and utilities for your

motherboard, please scan the code below:

1-1

PRIME A620M-K

Product Introduction

1.1 Before you proceed

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded

object or a metal object, such as the power supply case, to avoid damaging them due

to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the

bag that came with the component.

• Before you install or remove any component, ensure that the ATX power supply is

switched off or the power cord is detached from the power supply. Failure to do so

may cause severe damage to the motherboard, peripherals, or components.

• The pin denitions in this chapter are for reference only. The pin names depend on the

location of the header/jumper/connector.

• For more information on installing your motherboard, please scan the code below:

1-2

1.2.1 Layout contents

1. CPU socket

The motherboard comes with an AMD Socket AM5 designed for AMD Ryzen™ 7000 Series

Desktop Processors.

• Supports up to AMD 120W CPU.

• For more details, refer to Central Processing Unit (CPU).

Chapter 1: Product Introduction

1.2 Motherboard overview

DDR5 DIMM_A (64bit, 288-pin module)

DDR5 DIMM_B (64bit, 288-pin module)

CHA_FAN

KBMS_

U32G1_34

HDMI

USB_5_13

VGA

LAN_U32G1_67

ADD_GEN 2_1ADD_GEN 2_2

CPU_FAN

AAFP

SPDIF_OUT

F_PANEL

SATA6G_4 SATA6G_3 SATA6G_2 SATA6G_1

SPEAKER

ATX_PWR

U32G1_89

Super

I/O

2280 2260 2242

PCIEX16

BATTERY

PCIEX1

RGB_HEADER

CLRTC

DIGI

+VRM

22.1cm(8.7in)

22.6cm(8.9in)

COM_DEBUG

SOCKET AM5

ATX_12V

AMD

A620

PCIE SATA

4.0 X4

M.2(SOCKET3)

Audio

Codec

Ethernet

256Mb

BIOS

TPM

AUDIO

USB_1415 USB_1617

COM

1314 15

415 17

71812 911

Unplug the power cord before installing or removing the motherboard. Failure to do so can

cause you physical injury and damage motherboard components.

1-3

2. DDR5 DIMM slots

The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR5

(Double Data Rate 5) memory modules.

For more details, refer to System memory.

3. Expansion slots

This motherboard supports one PCIe 4.0 x16 graphics card and one PCIe 3.0 x1 network

card, SCSI card or other card that complies with the PCI Express specication.

• Additional PCIe bifurcation and M.2 settings for RAID function are also supported

when a Hyper M.2 x16 series card is installed.

• For full details on the PCIe bifurcation, you may visit the support site at

https://www.asus.com/support/FAQ/1037507/.

• The Hyper M.2 x16 series card is sold separately.

• Adjust the PCIe bifurcation under BIOS settings.

4. Fan headers

The Fan headers allow you to connect fans to cool the system.

5. Power connectors

These Power connectors allow you to connect your motherboard to a power supply. The

power supply plugs are designed to t in only one orientation. Find the proper orientation and

push down rmly until the power supply plugs are fully inserted.

Ensure to connect the 8-pin power plug.

We recommend that you use a PSU with a higher power output when conguring a system

with more power-consuming devices. The system may become unstable or may not boot

up if the power is inadequate.

6. M.2 slot (Key M)

The M.2 slot allows you to install an M.2 device such as an M.2 SSD module.

AMD Ryzen™ 7000 Series Desktop Processors

M.2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

7. SATA 6Gb/s ports

The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and

hard disk drives via SATA cables.

8. USB 3.2 Gen 1 header

The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen

1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1

header provides data transfer speeds of up to 5 Gb/s.

The USB 3.2 Gen 1 module is purchased separately.

FAN PWM

FAN IN

FAN PWR

GND

FAN PWM

FAN IN

FAN PWR

GND

FAN PWR

FAN IN

FAN PWM

FAN IN

FAN PWR

GND

FAN PWM

FAN IN

FAN PWR

GND

FAN PWR

FAN IN

FAN PWM

USB3+5V

IntA_P1_SSRX-

IntA_P1_SSRX+

GND

IntA_P1_SSTX-

IntA_P1_SSTX+

GND

IntA_P1_D-

IntA_P1_D+

GND

PIN 1

USB3+5V

IntA_P2_SSRX-

IntA_P2_SSRX+

GND

IntA_P2_SSTX-

IntA_P2_SSTX+

GND

IntA_P2_D-

IntA_P2_D+

PRIME A620M-K

1-4

9. USB 2.0 headers

The USB 2.0 headers allow you to connect USB modules for additional USB

2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480

Mb/s.

DO NOT connect a 1394 cable to the USB connectors. Doing so will

damage the motherboard!

The USB 2.0 module is purchased separately.

10. Addressable Gen 2 headers

The Addressable Gen 2 headers allow you to connect individually addressable

RGB WS2812B LED strips or WS2812B based LED strips.

The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/Data/

Ground), with a maximum power rating of 3A (5V), and the addressable headers on this

board can handle a combined maximum of 500 LEDs.

Before you install or remove any component, ensure that the power supply is switched off

or the power cord is detached from the power supply. Failure to do so may cause severe

damage to the motherboard, peripherals, or components.

• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the addressable RGB LED strip is

connected in the correct orientation, and the 5V connector is aligned with the 5V

header on the motherboard.

• The addressable RGB LED strip will only light up when the system is powered on.

• The addressable RGB LED strip is purchased separately.

11. Aura RGB header

The Aura RGB header allows you to connect RGB LED strips.

The Aura RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a

maximum power rating of 3A (12V), and no longer than 3m.

Before you install or remove any component, ensure that the ATX power supply is switched

off or the power cord is detached from the power supply. Failure to do so may cause severe

damage to the motherboard, peripherals, or components.

• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the RGB LED extension cable and the

RGB LED strip are connected in the correct orientation, and the 12V connector is

aligned with the 12V header on the motherboard.

• The LED strip will only light up when the system is powered on.

• The LED strip is purchased separately.

PIN 1

USB+5V

USB_P1-

USB_P1+

GND

USB+5V

USB_P2-

USB_P2+

GND

ADD_GEN 2

+5V

Data

Ground

PIN 1

Chapter 1: Product Introduction

1-5

12. Clear CMOS header

The Clear CMOS header allows you to clear the Real Time Clock (RTC) RAM in

the CMOS, which contains the date, time, system passwords, and system setup

parameters.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS setup to

re-enter data.

DO NOT short-circuit the pins except when clearing the RTC RAM. Short-circuiting or

placing a jumper cap will cause system boot failure!

If the steps above do not help, remove the onboard button cell battery and short the two

pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the button

cell battery.

13. COM Port header

The COM (Serial) Port header allows you to connect a COM port module.

Connect the COM port module cable to this header, then install the module to a

slot opening on the system chassis.

The COM port module is purchased separately.

14. Front Panel Audio header

The Front Panel Audio header is for a chassis-mounted front panel audio I/O

module that supports HD Audio. Connect one end of the front panel audio I/O

module cable to this header.

We recommend that you connect a high-denition front panel audio

module to this header to avail of the motherboard’s high-denition audio

capability.

15. S/PDIF Out header

The S/PDIF Out header allows you to connect the Sony/Philips Digital Interface

(S/PDIF) Out module.

The S/PDIF module is purchased separately.

16. Speaker header

The 4-pin header is for the chassis-mounted system warning speaker. The

speaker allows you to hear system beeps and warnings.

CLRTC

+3V_BAT

GND

PIN 1

RXD

DTR

DSR

CTS

COM

DCD

TXD

GND

RTS

AAFP

AGND

SENSE1_RETUR

SENSE2_RETUR

PORT1 L

PORT1 R

PORT2 R

SENSE_SEND

PORT2 L

HD-audio-compliant

pin definition

SPDIF_OUT

+5V

SPDIFOUT

GND

PIN 1

+5V

GND

Speaker Out

SPEAKER

PIN 1

PRIME A620M-K

1-6

17. SPI TPM header

This header supports a Trusted Platform Module (TPM)

system with a Serial Peripheral Interface (SPI), allowing you

to securely store keys, digital certicates, passwords, and

data. A TPM system also helps enhance network security,

protects digital identities, and ensures platform integrity.

The TPM module is purchased separately.

18. System Panel header

This header supports several chassis-mounted functions.

• System Power LED header (+PWR_LED-)

The 2-pin header allows you to connect the System Power LED. The

System Power LED lights up when the system is connected to a power

source, or when you turn on the system power, and blinks when the

system is in sleep mode.

• Storage Device Activity LED header (+HDD_LED-)

The 2-pin header allows you to connect the Storage Device Activity LED.

The Storage Device Activity LED lights up or blinks when data is read from or written to

the storage device or storage device add-on card.

• Power Button/Soft-off Button header (PWR_BTN)

The 2-pin header allows you to connect the system power button. Press the power

button to power up the system, or put the system into sleep or soft-off mode

(depending on the operating system settings).

• Reset Button header (RESET)

The 2-pin header allows you to connect the chassis-mounted reset button. Press the

reset button to reboot the system.

TPM

PIN 1

VCCSPI

SPI_TPM_RST#

F_SPI_PWR

F_SPI_CS0#_R

T_SPI_MISO

F_SPI_HOLD#_R

S_SPI_TPM_IRQ#

S_SPI_TPM_CS#

TPM_DETECT_L

GND

T_SPI_CLK

T_SPI_MOSI

PIN 1

PWR_BTN

PWR_LED+

PWR_LED-

PWR

GND

HDD_LED+

HDD_LED-

Ground

HWRST#

(NC)

F_PANEL

+PWR_LED-

+HDD_LED- RESET

Chapter 1: Product Introduction

1-7

1.2.2 Rear panel connectors

4 5

6 7

1. PS/2 Keyboard/Mouse combo port. This port is for a PS/2 keyboard or mouse.

2. USB 2.0 ports. These Universal Serial Bus (USB) ports are for USB 2.0 devices.

3. Ethernet port. This port allows Gigabit connection to a Local Area Network (LAN)

through a network hub. Refer to the table below for the Ethernet port LED indications.

Ethernet port LED indications

Speed LED

Status Description

OFF 10 Mbps connection

ORANGE 100 Mbps connection

GREEN 1 Gbps connection

Activity Link LED

Status Description

OFF No link

ORANGE Linked

BLINKING Data activity

ACT/LINK

LED SPEED

LED

Ethernet port

4. Line In port (light blue). This port connects the tape, CD, DVD player, or other audio

sources.

5. Line Out port (lime). This port connects a headphone or a speaker. In 4-channel,

5.1-channel, and 7.1-channel congurations, the function of this port becomes Front

Speaker Out.

6. HDMI™ port. This port is for a High-Denition Multimedia Interface (HDMI™)

connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other

protected content.

7. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other

VGA-compatible devices.

8. USB 3.2 Gen 1 (up to 5Gbps) ports. These Universal Serial Bus (USB) ports connect

to USB 3.2 Gen 1 devices.

9. Microphone port (pink). This port connects a microphone.

Refer to the audio conguration table below for the function of the audio ports in 2, 4, 5.1,

or 7.1-channel conguration.

PRIME A620M-K

1-8

Audio 2, 4, 5.1 or 7.1-channel configuration

Port 2-channel 4-channel 5.1-channel 7.1-channel

Light Blue

(Rear panel) - Rear Speaker Out Rear Speaker Out Rear Speaker Out

Lime

(Rear panel) Front Speaker Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink

(Rear panel) - - Center/

Subwoofer

Center/

Subwoofer

Lime

(Front panel) - - - Side Speaker Out

Pink

(Front panel) - - - -

To configure a 7.1-channel audio output:

Use a chassis with HD audio module in the front panel to support a 7.1-channel audio

output.

Chapter 1: Product Introduction

1-9

1.3 Central Processing Unit (CPU)

This motherboard comes with an AMD Socket AM5 designed for AMD

Ryzen™ 7000 Series Desktop Processors.

Unplug all power cables before installing the CPU.

• Supports up to AMD 120W CPU.

• The AM5 socket has a different pinout design. Ensure that you use a CPU designed

for the AM5 socket. The CPU ts in only one correct orientation. DO NOT force the

CPU into the socket to prevent bending the connectors on the socket and damaging

the CPU!

• ASUS will not cover damages resulting from incorrect CPU installation/removal,

incorrect CPU orientation/placement, or other damages resulting from negligence by

the user.

Installing the CPU

Apply the Thermal Interface Material to the CPU cooling system and CPU before you install

the cooling system, if necessary.

PRIME A620M-K

1-10

1.4 System memory

This motherboard comes with two Double Data Rate 5 (DDR5) Dual Inline Memory Module

(DIMM) sockets. The gure illustrates the location of the DDR5 DIMM sockets:

DIMM_A

DIMM_B

Channel Sockets

Channel A DIMM_A

Channel B DIMM_B

A DDR5 memory module is notched differently from a DDR, DDR2, DDR3, or DDR4

module. DO NOT install a DDR, DDR2, DDR3, or DDR4 memory module to the DDR5 slot.

• You may install varying memory sizes in Channel A and Channel B. The system

maps the total size of the lower-sized channel for the dual-channel conguration. Any

excess memory from the higher-sized channel is then mapped for single-channel

operation.

• You may install 8 GB, 16 GB, 24 GB, 32 GB, and 48 GB unbuffered non-ECC DDR5

DIMMs into the DIMM sockets.

• The default memory operation frequency is dependent on its Serial Presence Detect

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value.

• For system stability, use a more efcient memory cooling system to support a full

memory load.

• Always install DIMMs with the same CAS latency. For optimal compatibility, we

recommend that you install memory modules of the same version or date code (D/C)

from the same vendor. Check with the retailer to get the correct memory modules.

• Supported memory types, data rate (speed), and number of DRAM modules vary

depending on the CPU and memory conguration, for more information please refer

to CPU/Memory Support list under the Support tab of product information site or visit

https://www.asus.com/support/.

Recommended memory configurations

DIMM_B

DIMM_A

DIMM_B

DIMM_A

Chapter 1: Product Introduction

Pagina se încarcă ...

Asus PRIME A620M-K-CSM Manual de utilizare

Marca: Asus

Model: PRIME A620M-K-CSM

Categorie: Plăci de bază

Tip: Manual de utilizare

Acest manual este potrivit și pentru

PRIME A620M-K

Descărcați PDF

raport

în alte limbi

English: Asus PRIME A620M-K-CSM User manual
italiano: Asus PRIME A620M-K-CSM Manuale utente