Simplicity 2691048-04 Manual de utilizare

Categorie
Cositoare
Tip
Manual de utilizare

Acest manual este potrivit și pentru

Not for
Reproduction
80012299EST
Revision -
Zero-Turn Rider, 107 cm (42")
2691043-04
2691048-04
2691274-00
Models Covered
en
Operator’s Manual
Инструкции за експлоатация
hr
Priručnik za operatora
cs
bg
Návod k obsluze
Kezelési útmutató
hu
Pokyny na obsluhu a údržbu
Priroènik za uporabo
Instrukcja obsługi
Manual de utilizare
Руководство оператора
pl
ru
sk
ro
sl
Copyright © 2014 Briggs & Stratton Power Products Group, LLC.
Milwaukee, WI, USA. All rights reserved.
BRIGGS & STRATTON POWER PRODUCTS is a registered
trademark of Briggs & Stratton Corporation.
et
Kasutusjuhend
lt
Naudojimo instrukcija
lv
Operatora rokasgrāmata
Not for
Reproduction
2
B
C
A
2
A
3
4
A
B
C
5
6
H
I
J
G
F
E
D
C
A
B
1
Not for
Reproduction
3
7
9
8
10
A
11
A
B
12
Not for
Reproduction
4
14
A
B
15
B
C
A
16
13 lb-ft
(18 Nm)
13 lb-ft
(18 Nm)
13
Not for
Reproduction
CONTENTS
Operator Safety ................................................................................................... 5
Safety Interlock System Tests ......................................................................... 13
Features and Controls ...................................................................................... 14
Operation ........................................................................................................... 15
Maintenance ...................................................................................................... 18
Troubleshooting ................................................................................................ 21
Specifications .................................................................................................... 23
Thank you for purchasing this quality-built mower. We're pleased that you've placed your confidence in our brand. When
operated and maintained according to the instructions in this manual, your product will provide many years of dependable
service.
This manual contains safety information to make you aware of the hazards and risks associated with mowers and how
to avoid them. This product and its approved attachments/accessories are designed and intended only for lawn work or
snow removal and are not intended for any other purpose. It is important that you read and understand these instructions
thoroughly before attempting to start or operate this equipment. Save these original instructions for future reference.
en
5
Vibration measurement uncertainty – machine vibration
was recorded using methods and procedures outlined in
the appropriate International Standards in eect at the time
of manufacture. The uncertainties due to the measurement
may result in a variance of up to 5% from the published
value shown in the Declaration of Conformity.
Not for
Reproduction
WARNING
Certain components in this product and its related
accessories contain chemicals known to the State
of California to cause cancer, birth defects, or other
reproductive harm. Wash hands after handling.
WARNING
Battery posts, terminals, and related accessories
contain lead and lead compounds - chemicals known to the
State of California to cause cancer, birth defects, or other
reproductive harm. Wash hands after handling.
WARNING
The engine exhaust from this product contains
chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm.
Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains
important instructions that should be followed during the
initial set-up, the operation, and the maintenance of the
equipment. Save these original instructions for future
reference.
The safety alert symbol is used to identify safety
information about hazards that can result in personal injury.
A signal word (DANGER, WARNING, or CAUTION) is used
with the alert symbol to indicate the likelihood and the
potential severity of injury. In addition, a hazard symbol may
be used to represent the type of hazard.
DANGER indicates a hazard which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazard which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazard which, if not avoided,
could result in minor or moderate injury.
NOTICE indicates a situation that could result in damage
to the product.
FIRE
MOVING PARTS SHOCK
STOP
TOXIC FUMES
KICKBACK EXPLOSION
ON OFF
CHOKE
FUEL
HOT SURFACE
HAZARDOUS
CHEMICAL
WEAR EYE
PROTECTION
READ MANUAL FAST
SLOW
OIL
Safety Symbols and Meanings
WARNING
Running engine gives o carbon monoxide, an
odorless, colorless, poison gas.
Breathing carbon monoxide can cause headache,
fatigue, dizziness, vomiting, confusion, seizures,
nausea, fainting or death.
• Operate equipment ONLY outdoors.
• Keep exhaust gas from entering a conned area through
windows, doors, ventilation intakes, or other openings.
Operator Safety
ROLL-OVER
HAZARD
AMPUTATION
HAZARD
6
FUEL
SHUT-OFF
Not for
Reproduction
GENERAL OPERATION
1. Read, understand, and follow all instructions in the
manual and on the unit before starting.
2. Do not put hands or feet near rotating parts or under
the machine. Keep clear of the discharge opening at all
times.
3. Only allow responsible adults, who are familiar with the
instructions, to operate the unit (local regulations can
restrict operator age).
4. Clear the area of objects such as rocks, toys, wire, etc.,
which could be picked up and thrown by the blade(s).
5. Be sure the area is clear of other people before mowing.
Stop the unit if anyone enters the area.
6. Never carry passengers.
7. Do not mow in reverse unless absolutely necessary.
Always look down and behind before and while travelling
in reverse.
8. Never direct discharge material toward anyone. Avoid
discharging material against a wall or obstruction.
Material may ricochet back toward the operator. Stop the
blade(s) when crossing gravel surfaces.
9. Do not operate the machine without the entire grass
catcher, discharge guard (deflector), or other safety
devices in place.
10. Slow down before turning.
11. Never leave a running unit unattended. Always
disengage the PTO, set parking brake, stop engine, and
remove starter insert before dismounting.
12. Disengage blades (PTO) when not mowing. Shut off
engine and wait for all parts to come to a complete
stop before cleaning the machine, removing the grass
catcher, or unclogging the discharge guard.
13. Operate the machine only in daylight or good artificial
light.
14. Do not operate the unit while under the influence of
alcohol or drugs.
15 Watch for traffic when operating near or crossing
roadways.
16. Use extra care when loading or unloading the unit into a
trailer or truck.
17. Always wear eye protection when operating this unit.
18. Data indicates that operators, age 60 years and above,
are involved in a large percentage of power equipment-
related injuries. These operators should evaluate their
ability to operate the equipment safely enough to protect
themselves and others from injury.
19. Follow the manufacturer’s recommendations for wheel
weights or counterweights.
20. Keep in mind the operator is responsible for accidents
occurring to other people or property.
21. All drivers should seek and obtain professional and
practical instruction.
22. Always wear substantial footwear and trousers. Never
operate when barefoot or wearing sandals.
23. Before using, always visually check that the blades and
blade hardware are present, intact, and secure. Replace
worn or damaged parts.
24. Disengage attachments before: refueling, removing an
attachment, making adjustments (unless the adjustment
can be made from the operator’s position).
25. When the machine is parked, stored, or left unattended,
lower the cutting means unless a positive mechanical
lock is used.
26. Before leaving the operator’s position for any reason,
engage the parking brake (if equipped), disengage the
PTO, stop the engine, and remove the starter insert.
27. To reduce fire hazard, keep the unit free of grass,
leaves, & excess oil. Do not stop or park over dry leaves,
grass, or combustible materials.
TRANSPORTING AND STORAGE
1. When transporting the unit on an open trailer, make sure
it is facing forward, in the direction of travel. If the unit is
facing backwards, wind lift could damage the unit.
2. Always observe safe refueling and fuel handling
practices when refueling the unit after transportation or
storage.
3. Never store the unit (with fuel) in an enclosed poorly
ventilated structure. Fuel vapors can travel to an ignition
source (such as a furnace, water heater, etc.) and cause
an explosion. Fuel vapor is also toxic to humans and
animals.
4. Always follow the engine manual instructions for storage
preparations before storing the unit for both short and
long term periods.
5. Always follow the engine manual instructions for proper
start-up procedures when returning the unit to service.
6. Never store the unit or fuel container inside where there
is an open flame or pilot light, such as in a water heater.
Allow unit to cool before storing.
Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit,
severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is
capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions
or warnings which must be followed.
7
en
Not for
Reproduction
CHILDREN
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the unit
and the mowing activity. Never assume that children will
remain where you last saw them.
1. Keep children out of the mowing area and under the
watchful care of another responsible adult.
2. Be alert and turn unit off if children enter the area.
3. Before and during reverse operation, look behind and
down for small children.
4. Never carry children, even with the blade(s) off. They
may fall off and be seriously injured or interfere with
safe unit operation. Children who have been given rides
in the past may suddenly appear in the mowing area
for another ride and be run over or backed over by the
machine.
5. Never allow children to operate the unit.
6. Use extra care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
EMISSIONS
1. Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
2. Look for the relevant Emissions Durability Period and Air
Index information on the engine emissions label.
IGNITION SYSTEM
1. This spark ignition system complies with Canadian
ICES-002.
SLOPE OPERATION
Slopes are a major factor related to loss-of-control and tip-
over accidents, which can result in severe injury or death.
Operation on all slopes requires extra caution. If you cannot
back up the slope or if you feel uneasy on it, do not operate on
it.
Control of a walk-behind or ride-on machine sliding on a
slope will not be regained by the application of the brake. The
main reasons for loss of control are: insufficient tire grip on
the ground, speed too fast, inadequate braking, the type of
machine is unsuitable for its task, lack of awareness of the
ground conditions, incorrect hitching and load distribution.
1. Mow up and down slopes, not across.
2. Watch for holes, ruts, or bumps. Uneven terrain could
overturn the unit. Tall grass can hide obstacles.
3. Choose a slow speed so that you will not have to stop or
change speeds while on the slope.
4. Do not mow on wet grass. Tires may loose traction.
5. Always keep unit in gear especially when traveling down
slopes. Do not shift to neutral and coast downhill.
6. Avoid starting, stopping, or turning on a slope. If tires
lose traction, disengage the blade(s) and proceed slowly
straight down the slope.
7. Keep all movement on slopes slow and gradual. Do
not make sudden changes in speed or direction, which
could cause the machine to rollover.
8. Use extra care while operating machines with grass
catchers or other attachments; they can affect the
stability of the unit. Do not use on steep slopes.
9. Do not try to stabilize the machine by putting your foot on
the ground (ride-on units).
10. Do not mow near drop-offs, ditches, or embankments.
The mower could suddenly turn over if a wheel is over
the edge of a cliff or ditch, or if an edge caves in.
11. Do not use grass catchers on steep slopes.
12. Do not mow slopes if you cannot back up them.
13. See your authorized dealer/retailer for recommendations
of wheel weights or counterweights to improve stability.
14. Remove obstacles such as rocks, tree limbs, etc.
15. Use slow speed. Tires may lose traction on slopes even
through the brakes are functioning properly.
16. Do not turn on slopes unless necessary, and then, turn
slowly and gradually downhill, if possible.
TOWED EQUIPMENT (RIDE-ON UNITS)
1. Tow only with a machine that has a hitch designed for
towing. Do not attach towed equipment except at the
hitch point.
2. Follow the manufacturer’s recommendations for weight
limit for towed equipment and towing on slopes.
3. Never allow children or others in or on towed equipment.
4. On slopes, the weight of the towed equipment may
cause loss of traction and loss of control.
5. Travel slowly and allow extra distance to stop.
6. Do not shift to neutral and coast down hill.
WARNING
Never operate on slopes greater than 17.6 percent
(10°) which is a rise of 3-1/2 feet (106 cm) vertically in
20 feet (607 cm) horizontally.
When operating on slopes use additional wheel
weights or counterweights. See your dealer/retailer to
determine which weights are available and appropriate
for your unit.
Select slow ground speed before driving onto slope.
In addition to front weights, use extra caution when
operating on slopes with rear-mounted grass catchers.
Mow UP and DOWN the slope, never across the face,
use caution when changing directions and DO NOT
START OR STOP ON SLOPE.
8
Not for
Reproduction
SERVICE AND MAINTENANCE
Safe Handling of Gasoline
1. Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
2. Use only approved gasoline containers.
3. Never remove the gas cap or add fuel with the engine
running. Allow the engine to cool before refueling.
4. Never fuel the machine indoors.
5. Never store the machine or fuel container where there is
an open flame, spark, or pilot light such as near a water
heater or other appliance.
6. Never fill containers inside a vehicle or on a truck bed
with a plastic bed liner. Always place containers on the
ground away from your vehicle before filling.
7. Remove gas-powered equipment from the truck or
trailer and refuel it on the ground. If this is not possible,
then refuel such equipment on a trailer with a portable
container, rather than from a gasoline dispenser nozzle.
8. Keep nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete.
Do not use a nozzle lock-open device.
9. If fuel is spilled on clothing, change clothing immediately.
10. Never over-fill the fuel tank. Replace gas cap and tighten
securely.
11. Use extra care in handling gasoline and other fuels.
They are flammable and vapors are explosive.
12. If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
13. Replace all fuel tank caps and fuel container caps
securely.
Service & Maintenance
1. Never run the unit in an enclosed area where carbon
monoxide fumes may collect.
2. Keep nuts and bolts, especially blade attachment bolts,
tight and keep equipment in good condition.
3. Never tamper with safety devices. Check their proper
operation regularly and make necessary repairs if they
are not functioning properly.
4. Keep unit free of grass, leaves, or other debris build-up.
Clean up oil or fuel spillage. and remove any fuel-soaked
debris. Allow machine to cool before storage.
5. If you strike an object, stop and inspect the machine.
Repair, if necessary, before restarting.
6. Never make adjustments or repairs with the engine
running.
7. Check grass catcher components and the discharge
guard frequently and replace with manufacturer’s
recommended parts, when necessary.
8. Mower blades are sharp. Wrap the blade or wear gloves,
and use extra caution when servicing them.
9. Check brake operation frequently. Adjust and service as
required.
10. Maintain or replace safety and instructions labels, as
necessary.
11. Do not remove the fuel filter when the engine is hot
as spilled gasoline may ignite. Do not spread fuel line
clamps further than necessary. Ensure clamps grip
hoses firmly over the filter after installation.
12. Do not use gasoline containing METHANOL, gasohol
containing more than 10% ETHANOL, gasoline
additives, or white gas because engine/fuel system
damage could result.
13. If the fuel tank must be drained, it should be drained
outdoors.
14. Replace faulty silencers/mufflers.
15. Use only factory authorized replacement parts when
making repairs.
16. Always comply with factory specifications on all settings
and adjustments.
17. Only authorized service locations should be utilized for
major service and repair requirements.
18. Never attempt to make major repairs on this unit
unless you have been properly trained. Improper
service procedures can result in hazardous operation,
equipment damage and voiding of manufacturer’s
warranty.
19. On multiple blade mowers, take care as rotating one
blade can cause other blades to rotate.
20. Do not change engine governor settings or over-speed
the engine. Operating the engine at excessive speed
can increase the hazard of personal injury.
21. Disengage drive attachments, stop the engine, remove
the starter insert, and disconnect the spark plug wire(s)
before: clearing attachment blockages and chutes,
performing service work, striking an object, or if the unit
vibrates abnormally. After striking an object, inspect the
machine for damage and make repairs before restarting
and operating the equipment.
22. Never place hands near the moving parts, such as a
hydro pump cooling fan, when the tractor is running.
(Hydro pump cooling fans are typically located on top of
the transaxle).
23. Units with hydraulic pumps, hoses, or motors:
WARNING: Hydraulic fluid escaping under pressure
may have sufficient force to penetrate skin and cause
serious injury. If foreign fluid is injected into the skin
it must be surgically removed within a few hours by a
doctor familiar with this form of injury or gangrene may
result. Keep body and hands away from pin holes or
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, and not hands, to search for
leaks. Make sure all hydraulic fluid connections are tight
and all hydraulic hoses and lines are in good condition
before applying pressure to the system. If leaks occur,
have the unit serviced immediately by your authorized
dealer.
24. WARNING: Stored energy device. Improper release of
springs can result in serious personal injury. Springs
should be removed by an authorized technician.
25. Models equipped with an engine radiator: WARNING:
Stored energy device. To prevent serious bodily injury
from hot coolant or steam blow-out, never attempt to
remove the radiator cap while the engine is running.
Stop the engine and wait until it is cool. Even then, use
extreme care when removing the cap.
9
en
Not for
Reproduction
10
WARNING: To avoid serious injury, operate your unit up and
down the face of slopes, never across the face. Do not operate
on slopes greater than 10 degrees. Make turns gradually to
prevent tipping or loss of control. Exercise extreme caution
when changing direction on slopes. Braking may be affected by
attachments. Reduce speed on slopes.
1. Fold this page along dotted line indicated above.
2. Hold page before you so that its left edge is vertically parallel to a tree
trunk or other upright structure.
3. Sight across the fold in the direction of hill slope you want to measure.
4. Compare the angle of the fold with the slope of the hill.
ONLY RIDE UP AND DOWN HILL,
NOT ACROSS HILL
F
O
L
D
A
LON
G
D
OT
TED LI
N
E
THIS IS A
10 DEGREE SLOPE
10 DEGREES MAX.
SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION
SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION
10 DEGREES MAX.
ONLY RIDE UP AND DOWN HILL,
NOT ACROSS HILL.
WARNING: To avoid serious injury, operate your unit up and
down the face of slopes, never across the face. Do not operate
on slopes greater than 10 degrees. Make turns gradually to
prevent tipping or loss of control. Exercise extreme caution
when changing direction on slopes. Braking may be affected by
attachments. Reduce speed on slopes.
1. Fold this page along dotted line indicated above.
2. Hold page before you so that its left edge is vertically parallel to a tree
trunk or other upright structure.
3. Sight across the fold in the direction of hill slope you want to measure.
4. Compare the angle of the fold with the slope of the hill.
FOLD ALONG DOTTED LINE
THIS IS A 10 DEGREE SLOPE
Not for
Reproduction
11
Safety Decals
This unit has been designed and manufactured to provide
you with the safety and reliability you would expect from an
industry leader in outdoor power equipment manufacturing.
Although reading this manual and the safety instructions
it contains will provide you with the necessary basic
knowledge to operate this equipment safely and effectively,
we have placed several safety labels on the unit to remind
you of this important information while you are operating
your unit.
All DANGER, WARNING, CAUTION and instructional
messages on your rider and mower should be carefully read
and obeyed. Personal bodily injury can result when these
instructions are not followed. The information is for your
safety and it is important! The safety decals below are on
your rider and mower.
If any of these decals are lost or damaged, replace them at
once. See your local dealer for replacements.
These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the
equipment, to follow the safety instructions necessary for
safe, effective operation.
1753388
10
1
4
5
20 HR
AH
CCA
@ 18 °C
Pb
3-7773
Pb
558MF
500
45
This decal is installed on the battery.
6
Warning : Rotating Screen
Stay clear of rotating screen
as long as engine is running.
7104597
Warning: Hot Surface
Stay clear of hot surface.
1753350
Warning: Hot Surface
Do not touch hot surface.
724011
Important: Do not discard a
battery in the trash
Contact local authorities for disposal
and/or recycling of batteries.
1753387
2
1753386
3
4 , 5
4
3
2
1
en
Not for
Reproduction
1. DANGER - TIPPING AND SLIPPING HAZARD: Mow
across slopes, not up and down. Do not operate on
slopes over 15 degrees. Avoid sudden and sharp (fast)
turns while on slopes.
2. DANGER - THROWN OBJECTS HAZARD: Keep
bystanders and children a safe distance away. Remove
objects that can be thrown by the blade. Do not mow
without discharge chute in place.
3. DANGER: FIRE HAZARD: Keep unit free of grass,
leaves and excess oil. Do not add fuel while engine is
hot or running. Stop engine, remove key and allow to
cool for at least 3 minutes prior to adding fuel. Do not
add fuel indoors, in an enclosed trailer, garage or other
enclosed areas. Clean up spilled fuel. Do not smoke
while operating this machine.
4. DANGER - AMPUTATION HAZARD: Do not mow
when children or others are around. Never carry riders
especially, children even with the blades o. Do not
mow in reverse unless absolutely necessary. Look
down and behind – before and while backing.
5. WARNING: Read and understand the Operator’s
Manual before using this machine. Know the location
and function of all controls. Do not operate this machine
unless you are trained.
6. WARNING: Consult technical literature before
performing technical repairs or maintenance. When
leaving the machine, shuto engine, set the parking
brake to the lock position and remove the ignition key.
7. DANGER - AMPUTATION AND DISMEMBERMENT
HAZARD: To avoid injury from rotating blades and
moving parts, keep safety devices (guards, shields and
switches) in place and working.
8. DANGER - LOSS OF TRACTION, SLIDING,
STEERING AND CONTROL ON SLOPES HAZARD:
If machine stops forward motion or starts sliding on a
slope, stop the blades and drive slowly o the slope.
9. DANGER - THROWN OBJECTS HAZARD: Do not
mow without discharge chute or entire grass catcher in
place
10. DANGER - AMPUTATION AND THROWN OBJECTS
HAZARD: To avoid injury from rotating blades, stay
clear of deck edge and keep others away.
10
9
1753388
10
1753387
1753386
1
2 3
4
8
6
5
7
12
Not for
Reproduction
Decal, Control Panel,
L.H.
Part No. 7104232
7104232
Decal, Control Panel,
R.H.
Part No. 7104233
7104233
Decal, Ground
Speed Lever, L.H.
Part No. 7104226
7104226
Decal, Ground
Speed Lever, R.H.
Part No. 7104227
7104227
Decal, Transmission
Release
Part No. 7104231
Decal, Weight Limit
Part No. 7101940
Safety Interlock System Tests
This unit is equipped with a Safety Interlock System.
Do not attempt to bypass or tamper with the switches/
devices.
TEST 1 — ENGINE SHOULD NOT CRANK IF:
• PTO switch is engaged, OR
• Parking brake is disengaged, OR
• Ground speed levers are not locked in their START/
PARK positions.
TEST 2 — ENGINE SHOULD CRANK IF:
• PTO switch is NOT engaged, AND
• Parking brake is engaged, AND
• Ground speed levers are locked into their
START/PARK positions.
TEST 3 — ENGINE SHOULD SHUT OFF IF:
• Operator rises o seat.
TEST 4 — CHECK MOWER BLADE STOPPING TIME
The mower blades and mower drive belt should come
to a complete stop within five seconds after the electric
PTO switch is turned off. If mower drive belt does not stop
within five seconds, see your dealer.
NOTE: Once the engine has stopped, the PTO switch
must be turned off, the parking brake must be engaged,
and the ground speed levers must be locked in their
START/PARK positions in order to start the engine.
WARNING
If the unit does not pass a safety test, do not operate it.
See an authorized dealer.
7104231
Instructional Decals
13
en
Not for
Reproduction
Features and Controls
14
Control Functions
Compare Figure 1 with the information below, which briefly
describes the function of individual controls. Starting,
stopping, driving, and mowing require the combined use
of several controls applied in specific sequences. To learn
what combination and sequence of controls to use for
various tasks see the
Operation
section.
Ground Speed Levers
These levers control the ground speed and direction of the
rider. The left lever (I, Figure 1) controls the left rear drive
wheel and the right lever (A) controls the right rear drive
wheel.
Moving a lever forward increases the FORWARD speed of
the associated wheel, and pulling back on a lever increas-
es the REVERSE speed.
The further a lever is moved away from the neutral position
the faster the drive wheel will turn.
See the Operation section for steering instructions.
PTO Switch
The PTO (Power Take-Off) switch (B, Figure 1) engages
and disengages the mower blade clutch. To engage the
PTO, pull UP on the switch. Push DOWN to disengage.
Note that the operator must be seated firmly in the rider
seat for the PTO to function.
Engine Speed / Choke Control
(Choke-A-Matic)
The engine speed / choke control (C, Figure 1) controls
the engine speed and choke. Move the engine speed con-
trol to the FAST position to increase engine speed, and to
the SLOW position to decrease engine speed. Move the
engine speed / choke control past the FAST position to the
CHOKE position to start a cold engine. A warm engine may
not require choking.
NOTE: Always operate the rider with the engine speed
control in the FAST position.
Mower Cutting Height Adjustment Switch
The mower cutting height adjustment switch (D, Figure 1)
adjusts the cutting height between 1.75” (4,4 cm) and 4.0”
(10,0 cm). See Cutting Height Adjustment.
Fuel Tank Cap
To remove the fuel tank cap (E, Figure 1), turn counter-
clockwise.
Transmission Release Levers
The transmission release levers (F, Figure 1) deactivate the
transmissions so that the unit can be pushed by hand (see
Pushing the Unit by Hand).
Ignition Switch
The ignition switch (G, Figure 1) starts and stops the
engine; it has three positions:
OFF Stops the engine and shuts off the
electrical system.
RUN Allows the engine to run and powers the
electrical system.
START Cranks the engine for starting.
NOTE: Never leave the ignition switch in the RUN position
with the engine stopped–this drains the battery.
Parking Brake
Moving the parking brake lever (H, Figure 1) forward and
to the right engages the parking brake. Moving the lever to
the left and back disengages the brake.
Seat Adjustment Lever
The seat adjustment lever (J, Figure 1) allows the
seat to be adjusted forward and backward (see Seat
Adjustments).
Not for
Reproduction
15
Operation
General Operating Safety
Before rst time operation:
• Be sure to read all information in the Operator Safety
section before attempting to operate this rider and
mower.
• Become familiar with all of the controls and how to stop
the unit.
• Drive in an open area without mowing to become
accustomed to driving the unit.
Checks Before Starting
• Check that the crankcase is lled to full mark on
dipstick (A, Figure 2 - located under engine cover).
See the engine owner’s manual for instructions and oil
recommendations.
• Make sure all nuts, bolts, screws and pins are in place
and secure.
• Adjust the seat position (B, Figure 2), and make certain
you can reach all controls from the operator’s position.
• Fill the fuel tank (C, Figure 2) with fresh fuel. Refer to the
engine owner’s manual for fuel recommendations.
WARNING
Never allow passengers to ride on the unit.
Before leaving the operator’s position for any reason,
lock the ground speed levers in the START/PARK
position, engage the parking brake, disengage the PTO,
stop the engine and remove the key.
To reduce fire hazard, keep the engine, rider and mower
free of grass, leaves and excess grease. Do not stop
or park rider over dry leaves, grass or combustible
materials.
Gasoline is highly flammable and must be handled with
care. Never fill the tank when the engine is still hot from
recent operation. Do not allow open flame, smoking or
matches in the area. Avoid over-filling and wipe up any
spills.
WARNING
Never operate on slopes greater than 18 percent (10°).
Select slow ground speed before driving onto a slope.
Use extra caution when operating on slopes with a rear-
mounted grass catcher.
Mow up and down slopes, not across the face, use
caution when changing directions and DO NOT START
OR STOP ON SLOPE.
Do not load this zero-turn rider on a trailer or truck using
two separate ramps. Only use a single ramp that is at
least one foot wider than the width of the rear wheels of
this rider. This rider has a zero turning radius and the
rear wheels could fall off the ramps, or the rider could tip
over injuring the operator or bystanders.
WARNING
WARNING
If you do not understand how a specific control
functions, or have not yet thoroughly read the Features
and Controls section, do so now. Do NOT attempt to
operate the rider without first becoming familiar with the
location and function of ALL controls.
Starting the Engine
1. While sitting in the operator’s seat, make sure the PTO
switch is disengaged, the parking brake is engaged, and
the ground speed levers are locked in the START/PARK
position.
2. Set the engine speed control to the CHOKE position.
NOTE: A warm engine may not require choking.
3. Insert the key into the ignition switch and turn it to
START.
4. After the engine starts, move the engine speed control
back to the FAST position. Warm up the engine by
running it for at least a minute before engaging the PTO
switch or driving the rider.
5. After warming the engine, ALWAYS operate the
rider at FULL ENGINE SPEED when mowing.
In the event of an emergency the engine can be
stopped by simply turning the ignition switch to
STOP. Use this method only in emergency situations. For
normal engine shut down follow the procedure given in
Stopping the Rider and Engine.
en
Not for
Reproduction
16
Stopping the Rider and Engine
1. Return the ground speed levers to the middle (or neutral
‘N’) position to stop rider movement. Pivot the levers
outward to lock them in the START/PARK position.
2. Disengage the PTO by pushing down on the PTO
switch.
3. Engage the parking brake by moving the parking brake
lever forward and to the right.
4. Move the engine speed control to the SLOW position
and turn the ignition key to OFF. Remove the key.
Mowing
1. Make sure the PTO switch is disengaged, the parking
brake is engaged, the ground speed levers are locked in
their START/PARK positions, and the operator is in the
seat.
2. Start the engine (see Starting the Engine).
3. Set the mower cutting height (see Cutting Height
Adjustment).
4. Set the engine speed control to FAST.
5. Disengage the parking brake.
6. Engage the PTO by pulling up on the switch.
7. Pivot the ground speed levers in from the START/PARK
position to the neutral ‘N’ position.
8. Begin mowing. See Operator Safety for tips on safe
mowing practices.
9. When nished, shut o the PTO.
10. Stop the engine (see Stopping the Rider and Engine).
Pushing the Rider by Hand
1. Disengage the PTO, engage the parking brake, lock the
ground speed levers into their START/PARK positions,
turn the ignition OFF, remove the key, and wait for all
moving parts to stop.
2. To disengage the transmissions, pull the roll release
rods (A, Figure 3), located on either side of the engine,
up into the PUSH position.
3. Disengage the parking brake.
The rider can now be pushed by hand.
4. After moving the rider, re-engage the transmissions by
pushing the roll release rods back down to the DRIVE
position.
NOTICE
DO NOT TOW RIDER
Towing the unit will cause transmission damage. Do not
use another vehicle to push or pull this unit.
WARNING
DO NOT disengage the transmissions and coast down
slopes. DO NOT use Roll Release to disengage the
transmissions unless machine motion can be controlled
and engine is off.
Zero Turn
Driving Practice
The ground speed levers of the zero turn rider are
responsive, and learning to gain a smooth and efficient
control of the rider’s forward, reverse, and turning
movements will take some practice.
Spending some time going through the maneuvers shown
and becoming familiar with how the unit accelerates, travels,
and steers — before you begin mowing — is absolutely
essential to getting the most out of the zero turn rider.
Locate a smooth, flat area of your lawn — one with
plenty of room to maneuver. (Clear the area of objects,
people and animals before you begin.) Operate the
unit at mid-engine speed during this practice session
(ALWAYS operate at full engine speed when mowing), and
turn slowly to prevent tire slippage and damage to your
lawn.
We suggest you begin with the Smooth Travel procedure to
the right, and then advance through the forward, reverse,
and turning maneuvers.
Smooth Travel
The ground speed levers of the zero turn rider are
responsive.
The BEST method of handling the ground speed levers is
in three steps — as shown in Figure 4.
FIRST, place your hands onto the levers as shown (A,
Figure 4).
SECOND, to go forward gradually push the levers forward
with your palms (B, Figure 4).
THIRD, to speed up, move the levers farther forward. To
slow down smoothly, slowly move the levers toward neutral
(C, Figure 4).
Basic Driving
Forward Travel Practice
Gradually move both ground speed levers — evenly
FORWARD from neutral. See Figure 5. Slow down and
repeat.
Straight forward travel take practice. If necessary, top
speed can be balance-adjusted — see Speed Balancing
Adjustment section.
Not for
Reproduction
17
Reverse Travel Practice
LOOK DOWN & BEHIND, then gradually move both ground
speed levers evenly BACK from neutral. See Figure 6. Slow
down and repeat.
Practice backing up for several minutes before attempting
to do so near objects. The rider turns as sharply in reverse
as when going forward, and backing up straight takes prac-
tice.
Advanced Driving
Executing an End-Of-Row Zero Turn
Your zero turn rider’s unique ability to turn in place allows
you to turn around at the end of a cutting row rather than
having to stop and Y-turn before starting a new row. See
Figure 9.
For example, to execute a right end-of row zero turn:
1. Slow down at the end of the row.
2. Move the LEFT ground speed lever forward slightly
while moving the RIGHT ground speed lever back to
center and then slightly back from center.
3. Begin mowing forward again.
This technique turns the rider RIGHT and slightly overlaps
the row just cut — eliminating the need to back up and
re-cut missed grass.
As you become more familiar and experienced with operat-
ing the zero turn rider, you will learn more maneuvers that
will make your mowing time easier and more enjoyable.
Remember, the more you practice, the better your
control of the rider will be!
Practice Turning In Place
To turn in place, “zero turn,” gradually move one ground
speed lever forward from neutral and one lever back from
neutral simultaneously. See Figure 8. Repeat several times.
Changing the amount each lever is pulled — forward or
back, changes the “pivot point” you turn on.
Practice Turning Around a Corner
While traveling forward allow one lever to gradually return
back toward neutral. See Figure 7. Repeat several times.
To prevent pivoting directly on the tire tread, it is best to
keep both wheels going at least slightly forward.
en
Not for
Reproduction
18
Maintenance
Tire Pressure
Front 12-14 psi (0,82-0,96 bar)
Rear 10 psi (0,68 bar)
Maintenance Chart
Check Tire Pressure
Tires should be checked periodically to provide the optimum
traction and to guarantee the best cut (see Figure 10).
NOTE: These pressures may dier slightly from the
“Maximum Ination” stamped on the side walls of the tires.
WARNING
Unintentional sparking can result in fire or electric
shock.
Unintentional start-up can result in entanglement,
traumatic amputation, or laceration.
Before performing adjustments or repairs:
Disconnect the spark plug wire and keep it away from
the spark plug.
Disconnect battery at negative terminal (only engines
with electric start).
Use only correct tools.
Do not tamper with governor spring, links, or other
parts to increase engine speed.
Replacement parts must be of the same design and
installed in the same position as the original parts.
Other parts may not perform as well, may damage the
unit, and may result in injury.
Do not strike the flywheel with a hammer or hard object
because the flywheel may shatter during operation.
TRACTOR AND MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris off tractor and mower deck
Clean debris from engine compartment
Every 25 Hours or Annually *
Check tire pressure
Check mower blade stopping time
Check tractor and mower for loose hardware
Every 50 Hours or Annually *
Clean battery and cables
Check tractor brakes
See Dealer Annually to
Lubricate tractor and mower
Check mower blades **
ENGINE
First 5 Hours
Change engine oil
Every 8 Hours or Daily
Check engine oil level
Every 25 Hours or Annually *
Clean engine air filter and pre-cleaner **
Every 50 Hours or Annually *
Change engine oil
Replace oil filter
Annually
Replace air filter
Replace pre-cleaner
See Dealer Annually to
Inspect muffler and spark arrester
Replace spark plug
Replace fuel filter
Clean engine air cooling system
* Whichever comes first
** Check blades more often in regions with sandy soils or
high dust conditions.
* Whichever comes first
** Clean more often in dusty conditions or when airborne
debris is present.
Not for
Reproduction
19
Checking / Adding Fuel
To add fuel:
1. Remove the fuel cap.
2. Fill the tank to the bottom of the ller neck. This will
allow for fuel expansion.
NOTE: Do not overfill. Refer to your engine manual for
specific fuel recommendations.
3. Install and hand tighten the fuel cap.
Fuel Filter
The fuel filter is located in the fuel line between fuel tank
and fuel pump. If the filter is dirty or clogged, replace as
follows:
1. Disconnect the negative battery cable.
2. Place a container below the lter to catch spilled fuel.
3. Using pliers, open and slide hose clamps from fuel lter
(A, Figure 11).
4. Remove hoses from lter.
5. Install new lter in proper ow direction in fuel line.
6. Secure with hose clamps.
7. Reconnect the negative battery cable when nished.
Engine Maintenance
Refer to engine manual for all engine maintenance
procedures and recommendations.
WARNING
Gasoline is highly flammable and must be handled with
care. Never fill the tank when the engine is still hot from
recent operation. Do not allow open flame, smoking or
matches in the area. Avoid over-filling and wipe up any
spills.
Do not remove fuel filter when engine is hot, as spilled
gasoline may ignite. DO NOT spread hose clamps
further than necessary. Ensure clamps grip hoses firmly
over filter after installation.
Do not use gasoline containing METHANOL,
gasohol containing more than 10% ethanol,
gasoline additives, premium gasoline, or white
gas because engine/fuel system damage could
result.
Seat and Ground Speed Lever Adjustments
The seat and ground speed levers should be adjusted so
that operator’s elbows are supported by the arm rests when
his/her hands are on the controls, and the ground speed
levers can be moved through their full range of motion
without contacting the operator’s legs.
Seat Position Adjustment
Lift the seat adjustment lever (A, Figure 12). Slide the seat
forward or backward to the desired position, then lower the
seat adjustment lever. Make sure the lever locks into the
locking slots (B) in the seat base.
Ground Speed Lever Adjustment
Remove the ground speed lever mounting hardware
and bracket (see Figure 13). Move the levers to the
desired height using the adjustment holes. The bolts need
to be spaced so there is a hole open in between. Reinstall
the bracket and mounting hardware to the levers.
Speed Balancing Adjustment
If the rider drifts to the right or left when the ground speed
levers are in the maximum forward position, the top speed
of each of these levers can be balanced. Only adjust the
speed of the wheel that is traveling faster.
Loosen the bolt securing the forward adjust plate (see
Figure 14). Slide the plate up approximately 1/8”.
Retighten the bolt and recheck speed balance. Repeat
steps until adjustment is complete.
WARNING
DO NOT adjust the rider for a faster overall speed forward
or reverse than it was designed.
Cutting Height Adjustment
The cutting height adjustment switch controls the mower
cutting height. The cutting height is adjustable between
1.75” (4,4 cm) and 4.0” (10,0 cm).
To adjust cutting height:
Press the adjustment switch (A, Figure 15) forward to lower
the mower deck, backward to raise the mower deck.
The slot in the cutting height indicator (B, Figure 15) indi-
cates the cutting height of the mower deck.
WARNING
To avoid serious injury, perform adjustments only with
engine stopped, key removed and rider on level ground.
en
Not for
Reproduction
20
1. With parking brake engaged, PTO disengaged and an
operator in the seat, start the engine.
2. Have an assistant observe the mower drive belt through
the opening between the frame and top of mower deck.
Engage the PTO and wait several seconds. Disengage
the PTO and check the amount of time it takes for the
mower drive belt to stop.
3. If the mower drive belt does not stop within 5 seconds,
see an authorized dealer.
Check Mower Blade Stopping Time
WARNING
If the mower blade does not come to a complete stop within
5 seconds, the blade must be adjusted. Do not operate the
machine until the proper adjustment has been performed by
an authorized dealer.
Cleaning the Battery and Cables
1. Disconnect the cables from the battery, negative cable
rst (A, Figure 16).
2. Clean the battery terminals and cable ends with a wire
brush until shiny.
3. Reinstall the battery and reattach the battery cables,
positive cable rst (B, Figure 16).
4. Coat the cable ends and battery terminals with
petroleum jelly or non-conducting grease.
5. Be sure to replace the terminal cover (C, Figure 16) over
the positive battery terminal.
Battery Charging
A dead battery or one too weak to start the engine may be
the result of a defect in the charging system or other electri-
cal component. If there is any doubt about the cause of the
problem, see your dealer. If you need to replace the bat-
tery, see Cleaning the Battery and Cables section.
To charge the battery, follow the instructions provided by
the battery charger manufacturer as well as all warnings
included in the safety section of this book. Remove the
battery from the rider and place on a level, non-concrete
surface. Charge the battery at 6-10 amps for 1 hour. Do not
charge at a rate higher than 10 amps.
WARNING
Be careful when handling the battery. Keep flames and
sparks away from the battery.
When removing or installing battery cables, disconnect
the negative cable FIRST and reconnect it LAST. If not
done in this order, the positive terminal can be shorted to
the frame by a tool.
WARNING
Keep open flames and sparks away from the battery; the
gasses coming from it are highly explosive. Ventilate the
battery well during charging.
Storage
WARNING
Never store the unit (with fuel) in an enclosed,
unventilated structure. Fuel vapors can travel to an
ignition source (such as a furnace, water heater,
etc.) and cause an explosion. Fuel vapor is also
toxic to humans and animals.
When Storing Fuel Or Equipment With Fuel in Tank
Store away from furnaces, stoves, water heaters, or
other appliances that have pilot lights or other ignition
sources because they can ignite fuel vapors.
Equipment
Disengage the PTO, set the parking brake, and remove the
starter insert.
Store battery in a cool, dry place and fully charge about
once a month. If the battery is left in the unit, disconnect the
negative cable.
Fuel System
Fuel can become stale when stored over 30 days. Stale fuel
causes acid and gum deposits to form in the fuel system or
on essential carburetor parts. To keep fuel fresh, use Briggs
& Stratton FRESH START® fuel stabilizer, available as a
liquid additive or a drip concentrate cartridge.
There is no need to drain gasoline from the engine if a fuel
stabilizer is added according to instructions. Run the engine
for 2 minutes to circulate the stabilizer throughout the fuel
system. The engine and fuel can then be stored up to 24
months.
If gasoline in the tank has not been treated with a fuel
stabilizer, it must be drained into an approved container.
Run the engine until it stops from lack of fuel. The use of a
fuel stabilizer in the storage container is recommended to
maintain freshness.
Engine Oil
While the engine is still warm, change the engine oil. See
engine owner's manual.
Before starting the unit after it has been stored:
• Check all uid levels. Check all maintenance items.
• Perform all recommended checks and procedures found
in the engine owner's manual.
• Allow the engine to warm up for several minutes before
use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264

Simplicity 2691048-04 Manual de utilizare

Categorie
Cositoare
Tip
Manual de utilizare
Acest manual este potrivit și pentru