HOTPOINT/ARISTON WMG 8237BS EU Manualul utilizatorului

Categorie
Mașini de spălat
Tip
Manualul utilizatorului
1
GB
English,1
GB
WASHING MACHINE
Contents
Installation, 2-3
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Care and maintenance, 4
Cutting off the water and electricity supplies
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and advice, 5
General safety
Disposal
Description of the washing machine, 6-7
Control panel
Display
Running a wash cycle, 8
Wash cycles and options, 9
Table of programmes and wash cycles
Wash options
Detergents and laundry, 10
Detergent dispenser drawer
Preparing the laundry
Special wash cycles
Troubleshooting, 11
Service, 12
WMG 8237
Instructions for use
ΕΛΛΗΝΙΚΑ,13
GR
BG
Áúëãàðñêè,25
Français,37
FR
RO
Română,49
2
GB
Installation
! This instruction manual should be kept in a safe
place for future reference. If the washing machine
is sold, transferred or moved, make sure that the
instruction manual remains with the machine so
that the new owner is able to familiarise himself/
herself with its operation and features.
! Read these instructions carefully: they
contain vital information relating to the safe
installation and operation of the appliance.
Unpacking and levelling
Unpacking
1. Remove the washing machine from its
packaging.
2. Make sure that the washing machine has
not been damaged during the transportation
process. If it has been damaged, contact the
retailer and do not proceed any further with
the installation process.
3. Remove the 4
protective screws
(used during
transportation)
and the rubber
washer with the
corresponding
spacer, located on
the rear part of the
appliance (see figure).
4. Close off the holes using the plastic plugs
provided.
5. Keep all the parts in a safe place: you will
need them again if the washing machine
needs to be moved to another location.
! Packaging materials should not be used as
toys for children.
Levelling
1. Install the washing machine on a flat sturdy
floor, without resting it up against walls,
furniture cabinets or anything else.
2. If the floor is
not perfectly level,
compensate for
any unevenness
by tightening or
loosening the
adjustable front
feet (see figure); the
angle of inclination,
measured in relation
to the worktop, must
not exceed 2°.
Levelling the machine correctly will provide
it with stability, help to avoid vibrations and
excessive noise and prevent it from shifting
while it is operating. If it is placed on carpet or
a rug, adjust the feet in such a way as to allow
a sufficient ventilation space underneath the
washing machine.
Connecting the electricity and
water supplies
Connecting the water inlet hose
1. Connect the inlet
hose by screwing it to
a cold water tap using
a 3/4 gas threaded
connection (see
figure).
Before performing
the connection, allow
the water to run freely
until it is perfectly
clear.
2. Connect the
inlet hose to the
washing machine by
screwing it onto the
corresponding water
inlet of the appliance,
which is situated on
the top right-hand
side of the rear part
of the appliance (see
figure).
3. Make sure that the hose is not folded over
or bent.
! The water pressure at the tap must fall within
the range of values indicated in the Technical
data table (see next page).
! If the inlet hose is not long enough, contact a
specialised shop or an authorised technician.
! Never use second-hand hoses.
! Use the ones supplied with the machine.
3
GB
Connecting the drain hose
Connect the drain
hose, without bending
it, to a drain duct or
a wall drain situated
between 65 and 100
cm from the floor;
Alternatively, place
the drain hose
over the edge of
a washbasin or
bathtub, by fastening
the guide (which
can be purchased
at the technical
assistance centre) to
the tap (see figure).
The free end of the
hose should not be underwater.
! We advise against the use of hose
extensions; if it is absolutely necessary, the
extension must have the same diameter as the
original hose and must not exceed 150 cm in
length.
Electrical connections
Before plugging the appliance into the
electricity socket, make sure that:
• thesocketisearthedandcomplieswithall
applicable laws;
• thesocketisabletowithstandthe
maximum power load of the appliance as
indicated in the Technical data table (see
opposite);
• thepowersupplyvoltagefallswithinthe
values indicated in the Technical data table
(see opposite);
• thesocketiscompatiblewiththeplugof
the washing machine. If this is not the case,
replace the socket or the plug.
! The washing machine must not be installed
outdoors, even in covered areas. It is
extremely dangerous to leave the appliance
exposed to rain, storms and other weather
conditions.
65 - 100 cm
! When the washing machine has been
installed, the electricity socket must remain
within easy reach.
! Do not use extension cords or multiple
sockets.
! The cable should not be bent or
compressed.
! The power supply cable must only be
replaced by authorised technicians.
Warning! The company shall not be held
responsible in the event that these standards
are not observed.
The first wash cycle
Once the appliance has been installed, and
before you use it for the first time, run a
wash cycle with detergent and no laundry,
using wash cycle number “Auto Clean” (see
“Cleaning the washing machine”).
Technical data
Model
WMG 8237
Dimensions
width 59.5 cm
height 85 cm
depth 60.5 cm
Capacity
from 1 to 8 kg
Electrical
connections
please refer to the technical
data plate fixed to the ma-
chine
Water con-
nections
maximum pressure
1 MPa (10 bar)
minimum pressure
0.05 MPa (0.5 bar)
drum capacity 62 litres
Spin speed
up to 1200 rotations per
minute
Test wash
cycles in
accordan-
ce with
directives
1061/2010
1015/2010
programme
;
Cotton Standard 60°C.
programme
;
Cotton Standard 40°C.
This appliance conforms to
the following EC Directives:
- EMC 2014/30/EU (Electro-
magnetic Compatibility)
- LVD 2014/35/EU (Low
Voltage)
- 2012/19/EU - (WEEE)
4
GB
Care and maintenance
Cutting off the water and
electricity supplies
•Turnoffthewatertapaftereverywashcycle.
This will limit wear on the hydraulic system
inside the washing machine and help to
prevent leaks.
•Unplugthewashingmachinewhencleaning
it and during all maintenance work.
Cleaning the washing machine
•Theouterpartsandrubbercomponents
of the appliance can be cleaned using a soft
cloth soaked in lukewarm soapy water. Do not
use solvents or abrasives.
•Thewashingmachinehasa“AutoClean”
programme for its internal parts that must be
run with no load in the drum.
To help the wash cycle
you may want to use
either the detergent
(i.e. a quantity 10%
the quantity specified
for lightly-soiled
garments) or special
additives to clean the
washing machine. We
recommend running a
cleaning programme every 40 wash cycles.
To start the programme press buttons A and
B simultaneously for 5 seconds (see figure).
The programme will start automatically and will
run for about 75 minutes. To stop the cycle
press the START/PAUSE button.
Cleaning the detergent dispenser
drawer
Remove the dispenser
by raising it and
pulling it out (see
figure).
Wash it under running
water; this operation
should be repeated
frequently.
1
2
Caring for the door and drum of
your appliance
•Alwaysleavetheportholedoorajarinorder
to prevent unpleasant odours from forming.
Cleaning the pump
The washing machine is fitted with a self-
cleaning pump which does not require any
maintenance. Sometimes, small items (such as
coins or buttons) may fall into the pre-chamber
which protects the pump, situated in its bottom
part.
! Make sure the wash cycle has finished and
unplug the appliance.
To access the pre-chamber:
1. using a
screwdriver, remove
the cover panel on
the lower front part of
the washing machine
(see figure);
2. unscrew the lid
by rotating it anti-
clockwise (see figure):
a little water may
trickle out. This is
perfectly normal;
3. clean the inside thoroughly;
4. screw the lid back on;
5. reposition the panel, making sure the hooks
are securely in place before you push it onto
the appliance.
Checking the water inlet hose
Check the inlet hose at least once a year. If
there are any cracks, it should be replaced
immediately: during the wash cycles, water
pressure is very strong and a cracked hose
could easily split open.
! Never use second-hand hoses.
5
GB
Precautions and tips
! This washing machine was designed and constructed
in accordance with international safety regulations. The
following information is provided for safety reasons and
must therefore be read carefully.
General safety
• Thisappliancewasdesignedfordomesticuseonly.
This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
• Donottouchthemachinewhenbarefootorwithwetor
damp hands or feet.
• Donotpullonthepowersupplycablewhenunplugging
the appliance from the electricity socket. Hold the plug
and pull.
• Donotopenthedetergentdispenserdrawerwhilethe
machine is in operation.
• Donottouchthedrainedwaterasitmayreach
extremely high temperatures.
Neverforcetheportholedoor.Thiscoulddamagethesafety
lock mechanism designed to prevent accidental opening.
• Iftheappliancebreaksdown,donotunderany
circumstances access the internal mechanisms in an
attempt to repair it yourself.
• Alwayskeepchildrenwellawayfromtheappliancewhile
it is operating.
• Thedoorcanbecomequitehotduringthewashcycle.
• Iftheappliancehastobemoved,workinagroupoftwo
or three people and handle it with the utmost care. Never
try to do this alone, because the appliance is very heavy.
• Beforeloadinglaundryintothewashingmachine,make
sure the drum is empty.
Load balancing system
Before every spin cycle, to avoid excessive vibrations
before every spin and to distribute the load in a uniform
manner, the drum rotates continuously at a speed which
is slightly greater than the washing rotation speed. If,
after several attempts, the load is not balanced correctly,
the machine spins at a reduced spin speed. If the load is
excessively unbalanced, the washing machine performs
the distribution process instead of spinning. To encourage
improved load distribution and balance, we recommend
small and large garments are mixed in the load.
Disposal
•Disposingofthepackagingmaterials:observelocal
regulations so that the packaging may be re-used.
•TheEuropeanDirective2012/19/EUonWasteElectrical
and Electronic Equipment, requires that old household
electrical appliances must not be disposed of in the
normal unsorted municipal waste stream. Old appliances
must be collected separately in order to optimise the
recovery and recycling of the materials they contain and
reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose of
the appliance it must be separately collected. Consumers
should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.
6
GB
Description of the washing
machine
Control panel
TEMPERATURE
button
WASH
CYCLE
SELECTOR
KNOB
Detergent dispenser drawer
ON/OFF
button
SPIN
button
START/PAUSE
button and indicator
light
DISPLAY
DELAY
TIMER
button
OPTION
buttons and
indicator lights
Detergent dispenser drawer: used to dispense
detergents and washing additives (see “Detergents and
laundry”).
ON/OFF button: press this briefly to switch the
machine on or off. The START/PAUSE indicator light which
flashes slowly in a green colour shows that the machine is
switched on. To switch off the washing machine during the
wash cycle, press and hold the button for approximately 3
seconds; if the button is pressed briefly or accidentally the
machine will not switch off.
If the machine is switched off during a wash cycle, this
wash cycle will be cancelled.
WASH CYCLE SELECTOR KNOB: used to set the
desired wash cycle (see “Table of programmes and wash
cycles”).
OPTION buttons and indicator lights: press to select the
available options. The indicator light corresponding to the
selected option will remain lit.
CLEANING ACTION
button : to select the desired
wash intensity.
TEMPERATURE button: press to reduce or
completely exclude the temperature; the value appears on
the display.
SPIN button: press to reduce or completely exclude
the spin cycle; the value appears on the display.
DELAYED START button: press to set a delayed start
for the selected wash cycle; the delay period appears on
the display.
START/PAUSE button and indicator light: when the green
indicator light flashes slowly, press the button to start a
wash cycle. Once the cycle has begun the indicator light
will remain lit in a fixed manner. To pause the wash cycle,
press the button again; the indicator light will flash in an
amber colour. If the symbol is not illuminated, the door
may be opened (wait approximately 3 minutes). To start
the wash cycle from the point at which it was interrupted,
press the button again.
CHILD LOCK button : to activate the control panel
lock, press and hold the button for approximately 2
seconds. When the symbol is illuminated, the control
panel is locked (apart from the ON/OFF button). This
means it is possible to prevent wash cycles from being
modified accidentally, especially where there are children in
the home. To deactivate the control panel lock, press and
hold the button for approximately 2 seconds.
Standby mode
This washing machine, in compliance with new energy
saving regulations, is fitted with an automatic standby
system which is enabled after about 30 minutes if no
activity is detected. Press the ON-OFF button briefly and
wait for the machine to start up again.
CLEANING
ACTION
button
CHILD
LOCK
button
7
GB
Display
B
C
A
The display is useful when programming the machine and provides a great deal of information.
The duration of the available wash cycles and the remaining time of a running cycle appear in section A; if the DELAYED
START option has been set, the countdown to the start of the selected wash cycle will appear.
Pressing the corresponding button allows you to view the maximum spin speed and temperature values attained by the
machine during the set wash cycle, or the values selected most recently, if these are compatible with the set wash cycle.
The “wash cycle phases” corresponding to the selected wash cycle and the “wash cycle phase” of the running wash cycle
appear in section B:
Main wash
Steam Refresh
Rinse
Spin and Pump out
The icons corresponding to “temperature”, “spin” and “delayed start” (working from the left) are displayed in section C.
The “temperature” bars indicate the maximum temperature level which may be selected for the set cycle.
The “spin” bars indicate the maximum spin level which may be selected for the set cycle.
The “delay” symbol , when lit, indicates that the set “delayed start” value has appeared on the display.
DOOR LOCKED indicator light:
The lit symbol indicates that the door is locked. To prevent any damage, wait until the symbol turns off before opening the door
(wait approximately 3 minutes).
To open the door while a cycle is in progress, press the START/PAUSE button; if the DOOR LOCKED symbol is switched
off the door may be opened.
8
GB
Running a wash cycle
1. SWITCH THE MACHINE ON. Press the button;
the START/PAUSE indicator light will flash slowly in a
green colour.
2. LOAD THE LAUNDRY. Open the porthole door.
Load the laundry, making sure you do not exceed
the maximum load value indicated in the table of
programmes and wash cycles on the following page.
3. MEASURE OUT THE DETERGENT. Pull out the
detergent dispenser drawer and pour the detergent into
the relevant compartments as described in “Detergents
and laundry”.
4. CLOSE THE DOOR.
5. SELECT THE WASH CYCLE. Use the WASH CYCLE
SELECTOR knob to select the desired wash cycle. A
temperature and spin speed is set for each wash cycle;
these values may be adjusted. The duration of the cycle
will appear on the display.
6. CUSTOMISE THE WASH CYCLE. Use the relevant
buttons:
Modify the temperature and/or spin
speed. The machine automatically displays the
maximum temperature and spin speed values set for
the selected cycle, or the most recently-used settings
if they are compatible with the selected cycle. The
temperature can be decreased by pressing the
button, until the cold wash “OFF” setting is reached.
The spin speed may be progressively reduced by
pressing the button, until it is completely excluded
(the “OFF” setting). If these buttons are pressed again,
the maximum values are restored.
! Exception: if the
programme is selected, the
temperature can be increased up to a value of 90°C.
Setting a delayed start.
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. When this option has been
activated, the symbol lights up on the display. To
remove the delayed start setting, press the button until
the text “OFF” appears on the display.
Set the desired wash intensity.
Option makes it possible to optimise washing based
on the level of soil in the fabrics and on desired wash
cycle intensity.
Select the wash programme: the cycle will be
automatically set to “Normal” as optimised for garments
with an average level of soil (this setting is not applicable
to the “Wool” cycle, which is automatically set to
Delicate”).
For heavily-soiled garments press button until
the “Intensive” level is reached. This level ensures
a high-performance wash due to a larger quantity of
water used in the initial phase of the cycle and due to
increased drum rotation. It is useful when removing the
most stubborn stains.
It can be used with or without bleach. If you desire
bleaching, insert the extra tray compartment (4) into
compartment 1. When pouring in the bleach, be careful
not to exceed the “max” level marked on the central
pivot (see figure pag. 10).
For lightly-soiled garments or a more delicate treatment
of the fabrics, press button until the “Delicate
level is reached. The cycle will reduce drum rotation
to ensure washing results that are perfect for delicate
garments.
Modify the cycle settings.
• Pressthebuttontoenabletheoption;theindicator
light corresponding to the button will switch on.
• Pressthebuttonagaintodisabletheoption;the
indicator light will switch off.
! If the selected option is not compatible with the set
wash cycle, the indicator light will flash and the option
will not be activated.
! If the selected option is not compatible with a previously
selected one, the indicator light corresponding to the first
function selected will flash and only the second option will
be activated; the indicator light for the option which has
been activated will be illuminated.
! The options may affect the recommended load value
and/or the duration of the cycle.
7. START THE WASH CYCLE. Press the START/
PAUSE button. The corresponding indicator light will
turn green, remaining lit in a fixed manner, and the door
will be locked (the DOOR LOCKED symbol will
be lit). To change a wash cycle while it is in progress,
pause the washing machine using the START/PAUSE
button (the START/PAUSE indicator light will flash
slowly in an amber colour); then select the desired cycle
and press the START/PAUSE button again.
To open the door while a cycle is in progress, press
the START/PAUSE button; if the DOOR LOCKED
symbol is switched off the door may be opened (wait
approximately 3 minutes). Press the START/PAUSE
button again to restart the wash cycle from the point at
which it was interrupted.
8. THE END OF THE WASH CYCLE. This will be
indicated by the text “END” on the display; when the
DOOR LOCKED symbol switches off the door may
be opened (wait approximately 3 minutes). Open the
door, unload the laundry and switch off the machine.
! If you wish to cancel a cycle which has already begun,
press and hold the button. The cycle will be stopped
and the machine will switch off.
9
GB
Wash cycles and options
Wash options
! If the selected option is not compatible with the set
wash cycle, the indicator light will flash and the option
will not be activated.
! If the selected option is not compatible with a previously
selected one, the indicator light corresponding to the first
function selected will flash and only the second option
will be activated; the indicator light for the option which
has been activated will be illuminated.
Steam Hygiene
This option enhances washing performance by generating
steam during the wash cycle that eliminates any bacteria
from fibres while treating them at the same time. Place the
laundry in the drum, choose a compatible programme and
select option “ “.
Table of programmes and wash cycles
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary
according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options
selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 60°C . The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 40°C . The actual washing temperature may differ from the indicated value.
3) At 60 °C the “Prewash” function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle 5 with a temperature of 40°C.
! The steam generated during washing machine operation
may cause the porthole door to become hazy.
Prewash
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.: Put the detergent in the relevant compartment.
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual dam-
pness%
Energy con-
sumptionkWh
Total water lt
Cycle duration
Prewash
Wash
Bleach
Fabric
softener
1
Anti Stain
40° 1200
-
5 - - - 180’
2
Whites
60° 1200
-
5 - - - 180’
Cotton Standard 60° (1): heavily soiled whites and resistant colours.
60°
(Max. 90°)
1200
(3)
8 53 1.04 55 225’
Cotton Standard 4(2): lightly soiled resistant and delicate colours.
40° 1200 -
8 53 0.87 81 195’
5
Synthetics: heavily soiled resistant colours.
60° 800
4.5 46 1.03 60 115’
5
Synthetics (4): lightly soiled resistant colours.
40° 800
4.5 46 0.56 60 100’
6
Anti allergy
60° 1200 -
5 - - - 195’
7
Steam Refresh
- - - - - - 1.5 - - - 20’
8
Wool: for wool, cashmere, etc.
40° 800 -
-
2 - - - 90’
9
Delicates
30° 0 -
-
1 - - - 80’
10
Fast Wash 60’: to refresh normal soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
60° 1200 -
-
3.5 53 0.84 44 60’
11
Cotton Standard 20°: lightly soiled resistant and delicate colours.
20° 1200 -
8 - - - 175’
12
Eco Cottons
Cold
Water
1200 -
-
8 53 0.20 65 80’
13
Eco Synthetics
Cold
Water
800 -
-
3.5 48 0.12 37 70’
14
Eco Fast 30’
Cold
Water
800 -
-
3.5 71 0.10 36 30’
Rinse
- 1200 - - -
8 - - - 36’
Spin and Pump out
- 1200 - - - - 8 - - - 16’
10
GB
Detergents and laundry
Detergent dispenser drawer
Successful washing results also depend on the correct
dose of detergent: adding too much detergent will not
necessarily result in a more efficient wash, and may in
fact cause build up on the inside of your appliance and
contribute to environmental pollution.
! Use powder detergent for white cotton garments, for pre-
washing, and for washing at temperatures over 60°C.
! Follow the instructions given on the detergent
packaging.
! Do not use hand washing detergents; they create too
much foam.
Open the detergent
dispenser drawer and pour
in the detergent or washing
additive, as follows.
compartment 1: Pre-wash detergent (powder)
Before pouring in the detergent, make sure that extra
compartment 4 has been removed.
compartment 2: Detergent for the wash cycle
(powder or liquid)
If liquid detergent is used, it is recommended that the
removable plastic partition A (supplied) be used for proper
dosage.
If powder detergent is used, place the partition into slot B.
compartment 3: Additives (fabric softeners, etc.)
The fabric softener should not overflow the grid.
extra compartment 4: Bleach
Preparing the laundry
• Dividethelaundryaccordingto:
- the type of fabric/the symbol on the label
- the colours: separate coloured garments from whites.
• Emptyallgarmentpocketsandcheckthebuttons.
• Donotexceedthelistedvalues,whichreferto
the weight of the laundry when dry: see “Table of
programmes and wash cycles”.
How much does your laundry weigh?
1 sheet 400-500 g
1 pillow case 150-200 g
1 tablecloth 400-500 g
1 bathrobe 900-1,200 g
1 towel 150-250 g
Special wash cycles
Anti Stain: the programme 1 is suitable to heavily-soiled
garments with resistant colours. It ensures a washing class
that is higher than the standard class (A class).
When running the programme, do not mix garments of
M
AX
1
2
4
3
A
B
different colours. We recommend the use of powder
detergent. Pre-treatment with special additives is
recommended if there are obstinate stains.
Whites: use this cycle 2 to wash white clothes. The
programme is designed to maintain the brightness of white
clothes over time. Use powder detergent for best results.
Anti allergy: use programme 6 to remove major allergens
such as pollen, mites, cat’s and dog’s hair.
Steam Refresh: this programme refreshes garments
by removing bad odours and relaxing the fibres (1.5 kg,
roughly 3 items). Insert dry items only (that are not dirty)
and select programme 7. The garments will be damp once
the cycle is completed, so we recommend hanging them
to dry. The 7 programme makes ironing easier.
! Not recommended for wool or silk garments.
! Do not add softeners or detergents.
! The indicator light for the “ ” option will switch on when
this cycle is selected.
Wool: the wool wash cycle on this Hotpoint-Ariston
machine has been tested and approved by The Woolmark
Company for washing wool garments labelled as hand
washable provided that the garments are washed
according to the instructions on the garment label and
those issued by the manufacturer of this washing machine.
Hotpoint-Ariston is the first washing machine brand to be
approved by The Woolmark Company for Apparel Care-
Platinum for its washing performance and consumption of
energy and water. (M1127)
Delicates: use programme 9 to wash very delicate
garments having strasses or sequins.
To wash silk garments and curtains select the cycle 9 and
set the “Delicate” level from option .
We recommend turning the garments inside out before
washing and placing small items into the special bag
for washing delicates. Use liquid detergent on delicate
garments for best results.
Cotton Standard 20° ideal for lightly soiled cotton
loads. The effective performance levels achieved at cold
temperatures, which are comparable to washing at 40°,
are guaranteed by a mechanical action which operates at
varying speed, with repeated and frequent peaks.
Eco cycles
The Eco Cycles assure energy saving by eliminating
the need of heating water and it’s an advantage
both to your energy bill and the environment! These
innovative Eco programmes (
12
Cottons,
13
Synthetics
and
14
Fast Wash) are available for various fabrics
and different quantity of garment; they have been
designed to guarantee a high cleaning action even at
low temperature and can be used for lightly to medium
soiled loads. Eco Cycles give the best results thanks
to an intensified wash action, water optimization and
are carried out in the same average time of a standard
cycle. For the best washing results with Eco Cycles we
recommend the usage of a liquid detergent.
11
GB
Troubleshooting
Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Service”),
make sure that the problem cannot be solved easily using the following list.
Problem:
The washing machine does not
switch on.
The wash cycle does not start.
The washing machine does not fill
with water (the text “H2O” flashes
on the display).
The washing machine continuously
takes in and drains water.
The washing machine does not
drain or spin.
The washing machine vibrates a
lot during the spin cycle.
The washing machine leaks.
The “option and START/PAUSE
indicator lights flash rapidly and an
error code appears on the display (e.g.:
F-01, F-..).
There is too much foam.
Possible causes / Solutions:
• Theapplianceisnotpluggedintothesocketfully,ornotenoughtomakecontact.
• Thereisnopowerinthehouse.
• Thewashingmachinedoorisnotclosedproperly.
• TheON/OFFbuttonhasnotbeenpressed.
• TheSTART/PAUSEbuttonhasnotbeenpressed.
• Thewatertaphasnotbeenopened.
• Adelayedstarthasbeenset.
• Thewaterinlethoseisnotconnectedtothetap.
• Thehoseisbent.
• Thewatertaphasnotbeenopened.
• Thereisnowatersupplyinthehouse.
• Thepressureistoolow.
• TheSTART/PAUSEbuttonhasnotbeenpressed.
• Thedrainhoseisnotfittedataheightbetween65and100cmfromthefloor
(see “Installation”).
• Thefreeendofthehoseisunderwater(see “Installation”).
• Thewalldrainagesystemisnotfittedwithabreatherpipe.
If the problem persists even after these checks, turn off the water tap, switch the
appliance off and contact the Technical Assistance Service. If the dwelling is on one
of the upper floors of a building, there may be problems relating to water drainage,
causing the washing machine to fill with water and drain continuously. Special anti-
draining valves are available in shops and help to prevent this inconvenience.
• Thewashcycledoesnotincludedraining:somecyclesrequirethedraining
process to be enabled manually.
• Thedrainhoseisbent(see “Installation”).
• Thedrainageductisclogged.
• Thedrumwasnotunlockedcorrectlyduringinstallation(see “Installation”).
• Thewashingmachineisnotlevel(see “Installation”).
• Thewashingmachineistrappedbetweencabinetsandwalls(see “Installation”).
• Thewaterinlethoseisnotscrewedonproperly(see “Installation”).
• Thedetergentdispenserdrawerisblocked(forcleaninginstructions,see “Care
and maintenance”).
• Thedrainhoseisnotfixedproperly(see “Installation”).
• Switchoffthemachineandunplugit,waitforapproximately1minuteandthen
switch it back on again.
If the problem persists, contact the Technical Assistance Service.
• Thedetergentisnotsuitableformachinewashing(itshoulddisplaythetext“for
washing machines” or “hand and machine wash”, or the like).
• Toomuchdetergentwasused.
12
GB
Service
Before contacting the Technical Assistance Service:
• Checkwhetheryoucansolvetheproblemalone(see “Troubleshooting”);
• Restartthewashcycletocheckwhethertheproblemhasbeensolved;
• Ifthisisnotthecase,contactanauthorisedTechnicalAssistanceCentre.
! Always request the assistance of authorised technicians.
Have the following information to hand:
• thetypeofproblem;
• theappliancemodel(Mod.);
• theserialnumber(S/N).
This information can be found on the data plate applied to the rear of the washing machine, and can also be found on the
front of the appliance by opening the door.
13
GR
Ελληνικά
GR
ΠΛΥΝΤΗΡΙΟ
Περιεχόμενα
Εγκατάσταση, 14-15
Αποσυσκευασία και οριζοντίωση
Υδραυλικές και ηλεκτρικές συνδέσεις
Πρώτος κύκλος πλυσίματος
Τεχνικά στοιχεία
Συντήρηση και φροντίδα, 16
Αποκλεισμός νερού και ηλεκτρικού ρεύματος
Καθαρισμός του πλυντηρίου
Καθαρισμός του συρταριού απορρυπαντικών
Φροντίδα της πόρτας και του κάδου
Καθαρισμός της αντλίας
Έλεγχος του σωλήνα τροφοδοσίας του νερού
Προφυλάξεις και συμβουλές, 17
Γενική ασφάλεια
Διάθεση
Περιγραφή του πλυντηρίου, 18-19
Ταμπλό ελέγχου
Οθόνη
Πως διενεργείται ένας κύκλος πλυσίματος, 20
Προγράμματα και δυνατότητες, 21
Πίνακας των Προγραμμάτων
Δυνατότητες πλυσίματος
Απορρυπαντικά και μπουγάδα, 22
Θήκη απορρυπαντικών
Προετοιμασία της μπουγάδας
Ειδικά προγράμματα
Ανωμαλίες και λύσεις, 23
Υποστήριξη, 24
WMG 8237
Οδηγίες χρήσης
14
GR
Εγκατάσταση
Μια φροντισμένη οριζοντίωση προσδίδει
σταθερότητα στη μηχανή και αποσοβεί
δονήσεις, θορύβους και μετατοπίσεις κατά
τη λειτουργία. Σε περίπτωση μοκέτας ή
τάπητα, ρυθμίστε τα ποδαράκια έτσι ώστε να
υφίσταται κάτω από το πλυντήριο αρκετός
χώρος για τον αερισμό.
Υδραυλικές και ηλεκτρικές
συνδέσεις
Σύνδεση του σωλήνα τροφοδοσίας του
νερού
1. Συνδέστε το
σωλήνα τροφοδοσίας
βιδώνοντάς τον σε
ένα κρουνό κρύου
νερού με στόμιο
σπειρώματος 3/4 gas
(βλέπε εικόνα).
Πριν τη σύνδεση,
αφήστε να τρέξει το
νερό μέχρι να γίνει
διαυγές.
2. Συνδέστε το
σωλήνα τροφοδοσίας
στο πλυντήριο
βιδώνοντάς τον στην
αντίστοιχη είσοδο
νερού, στο πίσω
μέρος επάνω δεξιά
(βλέπε εικόνα).
3. Προσέξτε ώστε στο σωλήνα να μην
υπάρχουν ούτε πτυχώσεις, ούτε στενώσεις.
! Η πίεση νερού του κρουνού πρέπει να
κυμαίνεται μεταξύ των τιμών του πίνακα
Τεχνικά στοιχεία (βλέπε σελίδα δίπλα).
! Αν το μήκος του σωλήνα τροφοδοσίας δεν
επαρκεί, απευθυνθείτε σε ένα ειδικευμένο
κατάστημα ή σε εξουσιοδοτημένο τεχνικό.
! Μη χρησιμοποιείτε ποτέ
χρησιμοποιημένους σωλήνες.
! Χρησιμοποιείτε εκείνους που σας
παρέχονται με τη μηχανή.
! Είναι σημαντικό να διατηρήσετε το
εγχειρίδιο αυτό για να μπορείτε να το
συμβουλεύεστε οποιαδήποτε στιγμή. Σε
περίπτωση πώλησης, παραχώρησης ή
μετακόμισης, βεβαιωθείτε ότι παραμένει μαζί
με το πλυντήριο για να πληροφορεί τον νέο
ιδιοκτήτη για τη λειτουργία και τις σχετικές
προειδοποιήσεις.
! Διαβάστε προσεκτικά τις οδηγίες:
υπάρχουν σημαντικές πληροφορίες για την
εγκατάσταση, τη χρήση και την ασφάλεια.
Αποσυσκευασία και οριζοντίωση
Αποσυσκευασία
1. Αποσυσκευάστε το
πλυντήριο.
2. Ελέγξτε αν το
πλυντήριο έχει
υποστεί ζημιές κατά
τη μεταφορά. Αν
έχει υποστεί ζημιές
μην το συνδέετε και
επικοινωνήστε με τον
μεταπωλητή.
3. Αφαιρέστε τις 4 βίδες προστασίας για
τη μεταφορά και το λαστιχάκι με το σχετικό
διαχωριστικό, που βρίσκονται στο πίσω
μέρος (βλέπε εικόνα).
4. Κλείστε τις οπές με τα πλαστικά πώματα
που σας παρέχονται.
5. Διατηρείστε και τα τρία τεμάχια: αν το
πλυντήριο χρειαστεί να μεταφερθεί, θα
πρέπει να ξαναμονταριστούν.
! Οι συσκευασίες δεν είναι παιχνίδια για
μικρά παιδιά.
Ευθυγράμμιση
1. Εγκαταστήστε το πλυντήριο σε ένα
δάπεδο επίπεδο και ανθεκτικό, χωρίς να το
ακουμπήσετε σε τοίχους, έπιπλα ή άλλο.
2. Αν το δάπεδο
δεν είναι απόλυτα
οριζοντιωμένο,
αντισταθμίστε
τις ανωμαλίες
βιδώνοντας ή
ξεβιδώνοντας τα
πρόσθια ποδαράκια
(βλέπε εικόνα).Η
γωνία κλίσης,
μετρημένη στην
επιφάνεια εργασίας, δεν πρέπει να ξεπερνάει
τις 2°.
15
GR
Σύνδεση του σωλήνα αδειάσματος
Συνδέστε το σωλήνα
αδειάσματος, χωρίς
να τον διπλώσετε,
σε μια σωλήνωση
αδειάσματος ή σε
μια παροχέτευση
επιτοίχια σε ύψος
από το έδαφος
μεταξύ 65 και 100
cm.
Εναλλακτικά,
στηρίξτε τον σωλήνα
αδειάσματος
στο χείλος ενός
νιπτήρα ή μιας
λεκάνης, δένοντας
τον οδηγό
(διατίθεται από την
υπηρεσία τεχνικής
υποστήριξης) στη
βρύση (βλέπε
εικόνα). Το ελεύθερο άκρο του σωλήνα
αδειάσματος δεν πρέπει να παραμένει
βυθισμένο στο νερό.
! Δεν συνιστάται η χρήση προεκτάσεων
σωλήνων. Αν απαιτείται, η προέκταση πρέπει
να έχει την ίδια διάμετρο του αρχικού σωλήνα
και να μην ξεπερνάει τα 150 cm.
Ηλεκτρική σύνδεση
Πριν εισάγετε το βύσμα στην ηλεκτρική
πρίζα, βεβαιωθείτε ότι:
η πρίζα διαθέτει γείωση και τηρεί τις εκ του
νόμου προδιαγραφές.
Η πρίζα να είναι σε θέση να υποφέρει το
μέγιστο φορτίο ισχύος της μηχανής, που
αναφέρεται στον πίνακα Τεχνικών στοιχείων
(βλέπε δίπλα).
Η τάση τροφοδοσίας να κυμαίνεται μεταξύ
των τιμών που αναφέρονται στον πίνακα
Τεχνικών στοιχείων (βλέπε δίπλα).
Η πρίζα να είναι συμβατή με το βύσμα
του πλυντηρίου. Σε αντίθετη περίπτωση,
αντικαταστήστε την πρίζα ή το βύσμα.
! Το πλυντήριο δεν εγκαθίσταται σε ανοιχτό
χώρο, ακόμη και αν ο χώρος είναι καλυμμένος,
διότι είναι πολύ επικίνδυνο να το αφήνετε
εκτεθειμένο σε βροχή και κακοκαιρία.
! Με την εγκατάσταση του πλυντηρίου, η πρίζα
ρεύματος πρέπει να είναι εύκολα προσβάσιμη.
! Μη χρησιμοποιείτε προεκτάσεις και πολύπριζα.
! Το καλώδιο δεν πρέπει να φέρει πτυχές ή
να είναι συμπιεσμένο.
65 - 100 cm
! Το καλώδιο τροφοδοσίας πρέπει να
αντικαθίσταται μόνο από εξουσιοδοτημένους
τεχνικούς.
Προσοχή! Η επιχείρηση αποποιείται κάθε
ευθύνης σε περίπτωση που δεν τηρούνται
αυτοί οι κανόνες.
Πρώτος κύκλος πλυσίματος
Μετά την εγκατάσταση, πριν τη χρήση,
διενεργήστε ένα κύκλο πλυσίματος με
απορρυπαντικό και χωρίς ρούχα θέτοντας το
πρόγραμμα “ΑΥΤΌ-ΚΑΘΑΡΙΣΜΟΣ” (βλέπε
«Καθαρισμός του πλυντηρίου»).
Ôå÷íéêÜ óôïé÷åßá
ÌïíôÝëï WMG 8237
ÄéáóôÜóåéò
ðëÜôïò cm 59,5
ýøïò cm 85
âÜèïò cm 60,5
×ùñçôéêüôçôá áðü 1 Ýùò 8 kg
ÇëåêôñéêÝò
óõíäÝóåéò
ÂëÝðå ôçí ðéíáêßäá
÷áñáêôçñéóôéêþí åðß ôçò
ìç÷áíÞò
ÓõíäÝóåéò
íåñïý
ìÝãéóôç ðßåóç
1 MPa (10 bar)
ÅëÜ÷éóôç ðßåóç
0,05 MPa (0,5 bar)
÷ùñçôéêüôçôá ôïõ êÜäïõ 62 ëßôñá
Ôá÷ýôçôá
óôõøßìáôïò
ìÝ÷ñé 1200 óôñïöÝò ôï ëåðôü
Προγράμματα
ελέγχου
σύμφωνα με
τις οδηγίες
1061/2010
και
1015/2010
ðñüãñáììá
; κανονικό
πρόγραμμα για βαμβακερά
στους 60°C.
ðñüãñáììá
; κανονικό
πρόγραμμα για βαμβακερά
στους 40°C.
Ç óõóêåõÞ áõôÞ åßíáé
óýìöùíç ìå ôéò áêüëïõèåò
ÊïéíïôéêÝò Ïäçãßåò:
- EMC 2014/30/EU
(Çëåêôñï-ìáãíçôéêÞ
Óõìâáôüôçôá)
- 2012/19/EU (WEEE)
- LVD 2014/35/EU (×áìçëÞ
ÔÜóç)
16
GR
Συντήρηση και φροντίδα
Αποκλεισμός νερού και ηλεκτρικού
ρεύματος
Κλείνετε τον κρουνό του νερού μετά
από κάθε πλύσιμο. Έτσι περιορίζεται η
φθορά της υδραυλικής εγκατάστασης του
πλυντηρίου και αποσοβείται ο κίνδυνος
απωλειών.
Να βγάζετε το βύσμα από το ρεύμα όταν
καθαρίζετε το μηχάνημα και κατά τις
εργασίες συντήρησης.
Καθαρισμός του πλυντηρίου
• Το εξωτερικό μέρος και τα λαστιχένια
μέρη μπορούν να καθαρίζονται με ένα πανί
βρεγμένο με χλιαρό νερό και σαπούνι. Μη
χρησιμοποιείτε διαλύτες ή αποξυστικά.
• Το πλυντήριο διαθέτει ένα πρόγραμμα
“ΑΥΤΌ-ΚΑΘΑΡΙΣΜΟΣ” των εσωτερικών
μερών που πρέπει να διενεργείται χωρίς
κανένα τύπο φορτίου στον κάδο.
Το απορρυπαντικό
(σε ποσότητα ίση
με το 10% της
προτεινόμενης
για ρούχα λίγο
λερωμένα) ή
πρόσθετα ειδικά για
τον καθαρισμό του
πλυντηρίου, μπορούν
να χρησιμοποιηθούν
ως ενισχυτικά
στο πρόγραμμα πλύσης. Συνιστάται να
διενεργείτε το πρόγραμμα καθαρισμού κάθε
40 κύκλους πλυσίματος.
Για την ενεργοποίηση του προγράμματος
πατήστε ταυτόχρονα τα κουμπιά Α και Β για 5
δευτερόλεπτα (βλέπε Εικόνα).
Το πρόγραμμα θα ξεκινήσει αυτόματα και
θα έχει διάρκεια περίπου 75 λεπτών. Για να
σταματήσετε τον κύκλο πατήστε το κουμπί
START/PAUSE.
Καθαρισμός του συρταριού
απορρυπαντικών
Τραβήξτε το συρτάρι
ανασηκώνοντάς το
και τραβώντας το
προς τα έξω (βλέπε
εικόνα).
Πλένετέ το κάτω από
τρεχούμενο νερό. Ο
καθαρισμός αυτός
διενεργείται συχνά.
Φροντίδα της πόρτας και του κάδου
Να αφήνετε πάντα μισόκλειστη την πόρτα
για να μην παράγονται δυσοσμίες.
Καθαρισμός της αντλίας
Το πλυντήριο διαθέτει μια αντλία
αυτοκαθαριζόμενη που δεν χρειάζεται
συντήρηση. Μπορεί, όμως, να τύχει να
πέσουν μικρά αντικείμενα (κέρματα, κουμπιά)
στον προθάλαμο που προστατεύει την
αντλία, που βρίσκεται στο κάτω μέρος αυτής.
! Βεβαιωθείτε ότι ο κύκλος πλυσίματος έχει
τελειώσει και βγάλτε το βύσμα.
Για να έχετε
πρόσβαση στον
προθάλαμο:
1. αφαιρέστε το
ταμπλό κάλυψης
στο πρόσθιο πλευρό
του πλυντηρίου με
τη βοήθεια ενός
κατσαβιδιού
(βλέπε εικόνα).
2. Ξεβιδώστε το
καπάκι στρέφοντάς
το αριστερόστροφα
(βλέπε εικόνα): είναι
φυσικό να βγαίνει
λίγο νερό.
3. καθαρίστε επιμελώς το εσωτερικό.
4. ξαναβιδώστε το καπάκι.
5. ξαναμοντάρετε το πάνελ όντας σίγουροι,
πριν το σπρώξετε προς τη μηχανή, ότι έχετε
εισάγει τα γαντζάκια στις αντίστοιχες εσοχές.
Έλεγχος του σωλήνα τροφοδοσίας
του νερού
Ελέγχετε το σωλήνα τροφοδοσίας
τουλάχιστον μια φορά ετησίως. Αν
παρουσιάζει σκασίματα και σχισμές
αντικαθίσταται: κατά τα πλυσίματα οι ισχυρές
πιέσεις θα μπορούσαν να προκαλέσουν
αναπάντεχα σπασίματα.
! Μη χρησιμοποιείτε ποτέ
χρησιμοποιημένους σωλήνες.
1
2
17
GR
Προφυλάξεις και
συμβουλές
! Το πλυντήριο σχεδιάστηκε και κατασκευάστηκε σύμφωνα με τους
διεθνείς κανόνες ασφαλείας. Αυτές οι προειδοποιήσεις παρέχονται
για λόγους ασφαλείας και πρέπει να διαβάζονται προσεκτικά.
Γενική ασφάλεια
Η συσκευή αυτή σχεδιάστηκε αποκλειστικά για οικιακή
χρήση.
Η συσκευή αυτή μπορεί να χρησιμοποιηθεί
από παιδιά άνω των 8 ετών και από άτομα
με μειωμένες φυσικές, αισθητηριακές ή
νοητικές ικανότητες ή με εμπειρία και γνώσεις
ανεπαρκείς, αν επιτηρούνται ή αν έχουν δεχτεί
κατάλληλη εκπαίδευση σχετικά με τη χρήση της
συσκευής με τρόπο ασφαλή και κατανοώντας
τους σχετικούς κινδύνους. Τα παιδιά δεν πρέπει
να παίζουν με τη συσκευή. Συντήρηση και
καθαρισμός δεν πρέπει να διενεργούνται από
παιδιά χωρίς επιτήρηση.
Το πλυντήριο πρέπει να χρησιμοποιείται μόνο από
ενήλικα άτομα και σύμφωνα με τις οδηγίες που
αναφέρονται στο παρόν εγχειρίδιο.
Μην αγγίζετε το μηχάνημα με γυμνά πόδια ή με τα χέρια
ή τα πόδια βρεγμένα.
Μην βγάζετε το βύσμα από την ηλεκτρική πρίζα
τραβώντας το καλώδιο, αλλά να πιάνετε την πρίζα.
Μην ανοίγετε το συρταράκι απορρυπαντικών ενώ το
μηχάνημα είναι σε λειτουργία.
Μην αγγίζετε το νερό αδειάσματος, αφού μπορεί να
φτάσει σε υψηλές θερμοκρασίες.
Μην ζορίζετε σε καμία περίπτωση την πόρτα: θα
μπορούσε να χαλάσει ο μηχανισμός ασφαλείας που
προστατεύει από τυχαία ανοίγματα.
Σε περίπτωση βλάβης, σε καμία περίπτωση να
μην επεμβαίνετε στους εσωτερικούς μηχανισμούς
προσπαθώντας να την επισκευάσετε.
Να ελέγχετε πάντα τα παιδιά να μην πλησιάζουν στο
μηχάνημα σε λειτουργία.
Κατά το πλύσιμο η πόρτα τείνει να θερμαίνεται.
Αν πρέπει να μετατοπιστεί, συνεργαστείτε δύο ή τρία
άτομα με τη μέγιστη προσοχή. Ποτέ μόνοι σας γιατί το
μηχάνημα είναι πολύ βαρύ.
Πριν εισάγετε τη μπουγάδα ελέγξτε αν ο κάδος είναι άδειος.
Σύστημα ισοστάθμισης του φορτίου
Πριν από κάθε στύψιμο, για να αποφύγετε δονήσεις
υπερβολικές και για να κατανείμετε ομοιόμορφα το
φορτίο, ο κάδος διενεργεί περιστροφές σε μια ταχύτητα
ελαφρά ανώτερη εκείνης του πλυσίματος. Αν στο τέλος
των διαδοχικών προσπαθειών το φορτίο δεν έχει ακόμη
εξισορροπηθεί σωστά η μηχανή διενεργεί το στύψιμο σε
μια ταχύτητα χαμηλότερη της προβλεπόμενης. Παρουσία
υπερβολικής αστάθειας, το πλυντήριο διενεργεί την κατανομή
αντί του στυψίματος. Για να ευνοηθεί καλύτερη κατανομή
του φορτίου και της σωστής εξισορρόπησης συνιστάται η
ανάμιξη ρούχων μεγάλων και μικρών διαστάσεων.
Διάθεση
Διάθεση του υλικού συσκευασίας:
τηρείτε τους τοπικούς κανονισμούς, ώστε οι συσκευασίες
να μπορούν να επαναχρησιμοποιηθούν.
Η Ευρωπαϊκή Οδηγία 2012/19/EU για τα απορρίμματα
ηλεκτρικών και ηλεκτρονικών συσκευών, προβλέπει ότι
οι οικιακές ηλεκτρικές συσκευές δεν πρέπει να διατίθενται
στην κανονική ροή των στερεών αστικών απορριμμάτων.
Οι απορριπτόμενες συσκευές πρέπει να συλλέγονται
χωριστά για να βελτιστοποιείται το ποσοστό ανάκτησης
και ανακύκλωσης των υλικών που τις αποτελούν και
να αποφεύγονται δυνητικές ζημιές για την υγεία και το
περιβάλλον. Το σύμβολο του διαγραμμένου καλαθιού
υπάρχει σε όλα τα προϊόντα για να θυμίζει τις υποχρεώσεις
χωριστής συλλογής. Για περιατέρω πληροφορίες, για τη
σωστή απομάκρυνση των οικιακών ηλεκτρικών συσκευών,
οι κάτοχοι θα μπορούν να απευθύνονταιi στην αρμόδια
δημόσια υπηρεσία ή στους μεταπωλητές.
18
GR
Περιγραφή του πλυντηρίου
Πίνακας ελέγχου
Κουμπί
ΘΕΡΜΟΚΡΑΣΙΑΣ
ΕΠΙΛΟΓΈΑΣ
ΠΡΟΓΡΑΜΜΆΤΩΝ
Θήκη απορρυπαντικών
Κουμπί ON/OFF
Κουμπί
ΣΤΥΨΙΜΑΤΟΣ
Κουμπί και ενδεικτικό
φωτάκι START/PAUSE
ΟΘΌΝΗ
Κουμπί ΕΚΚΙΝΗΣΗΣ
ΜΕ ΥΣΤΕΡΗΣΗ
Κουμπιά και
ενδεικτικά
φωτάκια
ΛΕΙΤΟΥΡΓΙΑΣ
Θήκη απορρυπαντικών: για την προσθήκη
απορρυπαντικών και πρόσθετων (βλέπε
«Απορρυπαντικά και μπουγάδα»).
Κουμπί ON/OFF : πιέστε για λίγο το κουμπί για να
ανάψετε ή να σβήσετε το πλυντήριο. Το ενδεικτικό φωτάκι
START/PAUSE πράσινου χρώματος που αναβοσβήνει
αργά δείχνει ότι το πλυντήριο είναι αναμμένη. Για
να σβήσετε το πλυντήριο κατά το πλύσιμο πρέπει να
κρατάτε πατημένο το κουμπί πιο πολύ, περίπου 3 sec.
Στιγμιαίο ή τυχαίο πάτημα δεν επιτρέπει το σβήσιμο του
πλυντηρίου. Το σβήσιμο του πλυντηρίου κατά το πλύσιμο
σε εξέλιξη ακυρώνει το ίδιο το πλύσιμο.
ΕΠΙΛΟΓΕΑΣ ΠΡΟΓΡΑΜΜΑΤΩΝ: Για να θέσετε
το επιθυμητό πρόγραμμα (βλέπε τον “Πίνακα
προγραμμάτων”).
Κουμπιά και ενδεικτικά φωτάκια ΔΥΝΑΤΟΤΗΤΑΣ: για
να επιλέξετε τις διαθέσιμες δυνατότητες. Το ενδεικτικό
φωτάκι το σχετικό με τηδυνατότητα που επελέγη θα
παραμείνει αναμμένο.
Κουμπι
ΚΑΘΑΡΙΣΤΙΚΗ ΔΡΑΣΗ
: πιέστε για να
επιλέξετε την επιθυμητή ένταση πλυσίματος.
Κουμπί ΘΕΡΜΟΚΡΑΣΙΑΣ : Πιέστε για να μειώσετε ή
να αποκλείσετε τελείως τη θερμοκρασία. Η τιμή φαίνεται
στην οθόνη.
Κουμπί ΣΤΥΨΙΜΑΤΟΣ : πιέστε για να μειώσετε ή να
αποκλείσετε τελείως το στύψιμο. Η τιμή φαίνεται στην
οθόνη.
Κουμπί ΕΚΚΙΝΗΣΗΣ ΜΕ ΥΣΤΕΡΗΣΗ : πατήστε για
να θέσετε μια εκκίνηση με υστέρηση του προεπιλεγμένου
προγράμματος. Η καθυστέρηση υποδεικνύεται στην
οθόνη.
Κουμπί με ενδεικτικό φωτάκι START/PAUSE: όταν το
πράσινο ενδεικτικό φωτάκι αναβοσβήνει αργά, πατήστε
το κουμπί για την εκκίνηση πλυσίματος. Με την εκκίνηση
του κύκλου το ενδεικτικό φωτάκι σταθεροποιείται. Για
να θέσετε μια παύση στο πλύσιμο, πατήστε εκ νέου
το κουμπί. Το ενδεικτικό φωτάκι θα αναβοσβήνει
με πορτοκαλί χρώμα. Αν το σύμβολο δεν είναι
φωτισμένο, μπορείτε να ανοίξετε την πόρτα (περιμένετε 3
λεπτά περίπου). Για να ξεκινήσει πάλι το πλύσιμο από το
σημείο διακοπής, πατήστε εκ νέου το κουμπί.
Κουμπι
ΑΣΦΑΛΙΣΗΣ
ΚΟΥΜΠΙΩΝ : Για την
ενεργοποίηση του μπλοκ του πίνακα ελέγχου, κρατήστε
πατημένο το κουμπί για περίπου 2 δευτερόλεπτα. Το
αναμμένο σύμβολο δείχνει ότι ο πίνακας ελέγχου είναι
ασφαλισμένος. Με τον τρόπο αυτόν παρεμποδίζονται
τυχαίες τροποποιήσεις των προγραμμάτων, κυρίως αν
στο σπίτι υπάρχουν παιδιά (πλην του κουμπιού
ON/OFF). Για την απενεργοποίηση του κλειδώματος
του πίνακα ελέγχου, κρατήστε πατημένο το κουμπί για
περίπου 2 δευτερόλεπτα.
Τρόπος stand by
Το πλυντήριο αυτό, σύμφωνα με τις νέες διατάξεις για
την εξοικονόμηση ενέργειας, διαθέτει ένα σύστημα
αυτόματου σβησίματος (stand by) που τίθεται σε
λειτουργία εντός 30 λεπτών στην περίπτωση μη χρήσης.
Πιέστε στιγμιαία το κουμπί ON/OFF και περιμένετε να
ενεργοποιηθεί εκ νέου η μηχανή.
Κουμπί
ΚΑΘΑΡΙΣΤΙΚΗ
ΔΡΑΣΗ
Κουμπί
ΑΣΦΑΛΙΣΗΣ
ΚΟΥΜΠΙΩΝ
19
GR
ΟΘΌΝΗ
Η οθόνη είναι χρήσιμη για τον προγραμματσισμό της μηχανής και παρέχει πολλαπλές πληροφορίες.
Στην ενότητα A απεικονίζεται η διάρκεια των διαφόρων διαθέσιμων προγραμμάτων και αφού έχει εκκινηθεί ο κύκλος, του
υπολειπόμενου χρόνου για το τέλος αυτού. Στην περίπτωση που έχει τεθεί μια ΚΑΘΥΣΤΕΡΗΜΕΝΗ ΕΚΚΙΝΗΣΗ, απεικονίζεται
ο χρόνος που υπολείπεται στην εκκίνηση του επιλεγμένου προγράμματος.
Ακόμη, πιέζοντας το σχετικό πλήκτρο, απεικονίζονται οι μέγιστες τιμές της θερμοκρασίας και της ταχύτητας φυγοκέντρησης
που μπορεί να διενεργήσει η μηχανή με βάση το τεθέν πρόγραμμα ή τις τελευταίες επιλεγμένες τιμές αν είναι συμβατές με
το επιλεγμένο πρόγραμμα.
Στην ενότητα B απεικονίζονται οι “φάσεις πλυσίματος ” που προβλέπονται για τον επιλεγμένο κύκλο και με το πρόγραμμα
εκκινηθέν η “φάση πλυσίματος” σε εξέλιξη:
Πλύσιμο
Ατμός Φρεσκαρίσματος
Ξέβγαλμα
Στύψιμο + Άδειασμα
Στην ενότητα C υπάρχουν, ξεκινώντας από αριστερά, τα εικονίδια τα σχετικά με τη “θερμοκρασία”, το “στύψιμο” και την
“Καθυστερημένη εκκίνηση”.
Οι μπάρες “θερμοκρασίας” δείχνουν το επίπεδο θερμοκρασίας το σχετικό με το μέγιστο επιλέξιμο για τον τεθέντα
χρόνο.
Οι μπάρες “στυψίματος” δείχνουν το επίπεδο στυψίματος το σχετικό με το μέγιστο επιλέξιμο για τον τεθέντα κύκλο.
Το σύμβολο “ΚΑΘΥΣΤΕΡΗΜΕΝΗ ΕΚΚΙΝΗΣΗ” φωτισμένο δείχνει ότι στην οθόνη απεικονίζεται η τιμή της τεθείσας
“Καθυστερημένης εκκίνηση”.
Ενδεικτικό φωτάκι Πόρτα ασφαλισμένη
Το αναμμένο σύμβολο δείχνει ότι η πόρτα είναι μπλοκαρισμένη. Για την αποφυγή ζημιών πρέπει να περιμένετε να σβήσει
το σύμβολο πριν ανοίξετε την πόρτα (περιμένετε 3 λεπτά περίπου).
Για να ανοίξετε την πόρτα ενώ είναι σε εξέλιξη ένας κύκλος πιέστε τοκουμπί START/PAUSE. Αν το σύμβολο ΠΟΡΤΑ
ΑΣΦΑΛΙΣΜΕΝΗ είναι σβηστό θα μπορείτε να ανοίξετε την πόρτα.
B
C
A
20
GR
Πως διενεργείται ένας κύκλος
πλυσίματος
1. ΑΝΑΨΤΕ ΤΗ ΜΗΧΑΝΗ. Πατήστε το κουμπί ; Το
ενδεικτικό φωτάκι START/PAUSE θα αναβοσβήνει
αργά με πράσινο χρώμα.
2. ΦΟΡΤΩΣΗ ΡΟΥΧΩΝ. Ανοίξτε την πόρτα. Φορτώστε
τα ρούχα, προσέχοντας να μην ξεπεράσετε την
ποσότητα φορτίου που υποδεικνύεται στον πίνακα
προγραμμάτων της επόμενης σελίδας.
3. ΔΟΣΟΛΟΓΙΑ ΤΟΥ ΑΠΟΡΡΥΠΑΝΤΙΚΟΥ. Βγάλτε το
συρτάρι και χύστε το απορρυπαντικό στις αντίστοιχες
λεκανίτσες όπως εξηγείται στην “Απορρυπαντικά και
μπουγάδα”.
4. ΚΛΕΙΣΤΕ ΤΗΝ ΠΟΡΤΑ.
5. ΕΠΙΛΕΞΤΕ ΤΟ ΠΡΟΓΡΑΜΜΑ. Επιλέξτε με τον επιλογέα
ΠΡΟΓΡΑΜΜΑΤΩΝ το επιθυμητό πρόγραμμα. Σε αυτό
αντιστοιχεί μια θερμοκρασία και μια ταχύτητα στυψίματος
που μπορούν να τροποποιηθούν. Στην οθόνη θα
εμφανιστεί η διάρκεια του κύκλου.
6. ΕΞΑΤΟΜΙΚΕΥΣΗ ΤΟΥ ΚΥΚΛΟΥ ΠΛΥΣΙΜΑΤΟΣ.
Ενεργήστε στα σχετικά κουμπιά:
Τροποποιήστε τη θερμοκρασία ή/και το
στύψιμο. Η μηχανή απεικονίζει αυτόματα τις μέγιστες
θερμοκρασία και στύψιμο που προβλέπονται για το
τεθέν πρόγραμμα ή τις τελευταίες επιλεγείσες αν είναι
συμβατές με το επιλεγμένο πρόγραμμα. Πατώντας
το κουμπί μειώνεται προοδευτικά η θερμοκρασία
μέχρι το πλύσιμο σε κρύο νερό “OFF”. Πατώντας
το κουμπί μειώνεται προοδευτικά το στύψιμο
μέχρι τον αποκλεισμό του “OFF”. Περαιτέρω πάτημα
των κουμπιών επαναφέρει τις τιμές στις μέγιστες
προβλεπόμενες.
! Εξαίρεση: επιλέγοντας το πρόγραμμα
η
θερμοκρασία μπορεί να αυξηθεί μέχρι 90°.
Θέστε μια εκκίνηση με υστέρηση.
Για να θέσετε την εκκίνηση με υστέρηση του
προεπιλεγμένου προγράμματος, πατήστε το σχετικό
κουμπί μέχρι να επιτευχθεί ο χρόνος της επιθυμητής
υστέρησης. Όταν η δυνατότητα αυτή είναι ενεργή, στην
οθόνη φωτίζεται το σύμβολο . Για να απαλείψετε την
εκκίνηση με υστέρηση πατήστε το κουμπί μέχρις ότου
εμφανιστεί στην οθόνη η ένδειξη “OFF”.
Θέστε την επιθυμητή ένταση πλυσίματος.
Η δυνατότητα επιτρέπει τη βελτιστοποίηση του
πλυσίματος με βάση τον βαθμό λερώματος των
υφασμάτων και την επιθυμητή ένταση πλυσίματος.
Επιλέξτε το πρόγραμμα πλυσίματος, ο κύκλος τίθεται
αυτόματα στο επίπεδο “Normal” (ΚΑΝΟΝΙΚΟ),
βελτιστοποιημένο για ρούχα μετρίως λερωμένα, (αύτη
η ρύθμιση δεν ενδείκνυται για τον κύκλο “Μάλλινα”, που
τίθεται αυτόματα στο επίπεδοDelicate [ΑΠΑΛΟ]).
Για ρούχα πολύ λερωμένα πατήστε το κουμπί
μέχρι την επίτευξη του επιπέδου “Intensive
(ΕΝΤΑΤΙΚΟ). Το επίπεδο αυτό εξασφαλίζει ένα
πλύσιμο υψηλών επιδόσεων χάρη στη χρησιμοποίηση
μεγαλύτερης ποσότητας νερού στην αρχική φάση του
κύκλου και στη μεγαλύτερη μηχανική κίνηση, και είναι
χρήσιμο για την απομάκρυνση των πλέον ανθεκτικών
λεκέδων. Μπορεί να χρησιμοποιείται με ή χωρίς
λευκαντικό; Αν επιθυμείτε να κάνετε λεύκανση εισάγετε
την πρόσθετη λεκανίτσα 4, που σας παρέχεται, στη
λεκανίτσα 1. Στη δοσολογία του λευκαντικού μην
ξεπεράσετε τη στάθμη «max» που υποδεικνύεται στον
κεντρικό πείρο (βλέπε εικόνα της σελ. 22).
Για ρούχα λίγο λερωμένα ή για μια πιο ευαίσθητη
μεταχείριση των υφασμάτων, πατήστε το κουμπί
μέχρι την επίτευξη του επιπέδου “Delicate
(ΑΠΑΛΟ). Ο κύκλος θα μειώσει τη μηχανική κίνηση
εξασφαλίζοντας τέλεια αποτελέσματα πλυσίματος για
ευαίσθητα υφάσματα.
Τροποποιήστε τα χαρακτηριστικά του κύκλου.
• Πατήστε το κουμπί για την ενεργοποίηση της
δυνατότητας. Θα ανάψει το σχετικό ενδεικτικό φωτάκι.
• Πατήστε εκ νέου το κουμπί για την απενεργοποίηση
της δυνατότητας. Το ενδεικτικό φωτάκι θα σβήσει.
! Αν η επιλεγμένη δυνατότητα δεν είναι συμβατή
με το τεθέν πρόγραμμα, το ενδεικτικό φωτάκι θα
αναβοσβήνει και η δυνατότητα δεν θα ενεργοποιηθεί.
! Αν η δυνατότητα που επελέγη δεν είναι συμβατή με
μια άλλη προηγουμένως τεθείσα, το ενδεικτικό φωτάκι
σχετικό με την πρώτη λειτουργία που επελέγη θα
αναβοσβήνει και θα ενεργοποιηθεί μόνο η δεύτερη,
το ενδεικτικό φωτάκι της ενεργής δυνατότητας θα
φωτιστεί.
! Οι δυνατότητες μπορούν να αλλάξουν το
προτεινόμενο φορτίο ή/και τη διάρκεια του κύκλου.
7. ΕΚΚΙΝΗΣΗ ΤΟΥ ΠΡΟΓΡΑΜΜΑΤΟΣ. Πατήστε
το κουμπί START/PAUSE. Το σχετικό ενδεικτικό
φωτάκι θα φωτιστεί πράσινο σταθερό και η πόρτα
θα μπλοκάρει (σύμβολο ΠΟΡΤΑ ΑΣΦΑΛΙΣΜΕΝΗ
αναμμένο). Για να αλλάξετε ένα πρόγραμμα ενώ
είναι σε εξέλιξη ένας κύκλος, θέστε το πλυντήριο
σε παύση πιέζοντας το κουμπί START/PAUSE (το
ενδεικτικό φωτάκι START/PAUSE θα αναβοσβήνει
αργά με κεχριμπαρί χρώμα). Κατόπιν επιλέξτε τον
επιθυμητό κύκλο και πατήστε εκ νέου το κουμπί
START/PAUSE. Για να ανοίξετε την πόρτα ενώ είναι
σε εξέλιξη ένας κύκλος πιέστε το κουμπί START/
PAUSE. Αν το σύμβολο ΠΟΡΤΑ ΑΣΦΑΛΙΣΜΕΝΗ
είναι σβηστό θα μπορείτε να ανοίξετε την πόρτα
(περιμένετε 3 λεπτά περίπου). Πατήστε εκ νέου το
κουμπί START/PAUSE για να ξεκινήσει πάλι το
πρόγραμμα από το σημείο διακοπής.
8. ΤΕΛΟΣ ΤΟΥ ΠΡΟΓΡΑΜΜΑΤΟΣ. Υποδεικνύεται
από την ένδειξη “END” στην οθόνη, όταν το σύμβολο
ΠΟΡΤΑ ΑΣΦΑΛΙΣΜΕΝΗ σβήσει μπορείτε να
ανοίξετε την πόρτα (περιμένετε 3 λεπτά περίπου).
Ανοίξτε την πόρτα, αδειάστε τα ρούχα και σβήστε τη
μηχανή.
! Αν επιθυμείτε αν ακυρώσετε έναν ήδη εκκινηθέντα
κύκλο, πατήστε επί μακρόν το κουμπί . Ο κύκλος θα
διακοπεί και η μηχανή θα σβήσει.
1 / 1

HOTPOINT/ARISTON WMG 8237BS EU Manualul utilizatorului

Categorie
Mașini de spălat
Tip
Manualul utilizatorului