SilverStone RVS01 Informații despre produs

  • Bună! Sunt un chatbot AI antrenat să vă ajut cu SilverStone RVS01 Informații despre produs. Am citit deja documentul și sunt gata să vă ofer răspunsuri clare și simple.
HDD Installation Procedures
Lift up the leather cover and the main control module.
Öffnen Sie die Lederhülle und nehmen Sie das Hauptmodul heraus.
Levante la cubierta de cuero y el módulo de control principal.
Soulevez le cache en cuir et le module de contrôle principal.
Sollevare la copertura in pelle ed il modulo di controllo
principale.
Поднимите кожаный чехол и главный блок управления.
가죽 커버와 메인 컨트롤 모듈을 들어 올립니다.
打開RVS01皮革上蓋與主控件模組
打开RVS01皮革上盖与主控件模块
1
2
Press the left and right pincer to make them open widely
Drücken Sie die linke und die rechte Klammer damit diese
offen stehen.
Presione los enganches izquierdo y derecho para abrirlos del todo.
Appuyez sur les pinces droite et gauche pour les ouvrir largement
Premere i Fermi di destra e sinistra in modo che si aprano
per consentire il posizionamento dell’hard disk.
Надавите на левый и правый защелки-фиксаторы, чтобы
они разошлись.
오른쪽과 왼쪽 집게를 눌러 넓혀준 다음 열어 줍니다.
按下模組的左右鉗片兩底端以打開模組
按下模块的左右钳片两底端以打开模块
1/8