Yamaha PSR-E433 Manualul proprietarului

Marca: Yamaha

Model: PSR-E433

Categorie: Tastaturi

Tip: Manualul proprietarului

Owner’s Manual

DIGITAL KEYBOARD

Setting UpReferenceAppendix Quick Guide

PSR-E433 Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter).

DO NOT connect this product to any power supply or adapter other

than one described in the manual, on the name plate, or specifically

recommended by Yamaha.

WARNING: Do not place this product in a position where anyone

could walk on, trip over, or roll anything over power or connecting

cords of any kind. The use of an extension cord is not recommended!

If you must use an extension cord, the minimum wire size for a 25’

cord (or less ) is 18 AWG. NOTE: The smaller the AWG number, the

larger the current handling capacity. For longer extension cords, con-

sult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at

the time of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to update

existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound levels

that could cause permanent hearing loss. DO NOT operate for long

periods of time at a high volume level or at a level that is uncomfort-

able. If you experience any hearing loss or ringing in the ears, you

should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be dealer

assembled or installed. Please make sure that benches are stable and

any optional fixtures (where applicable) are well secured BEFORE

using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are

not covered by the manufacturer’s warranty, and are therefore the

owners responsibility. Please study this manual carefully and consult

your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keep-

ing with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of bat-

tery is approximately five years. When replacement becomes necessary,

contact a qualified service representative to perform the replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery being

charged.

When installing batteries, never mix old batteries with new ones, and

never mix different types of batteries. Batteries MUST be installed cor-

rectly. Mismatches or incorrect installation may result in overheating and

battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all bat-

teries away from children. Dispose of used batteries promptly and as

regulated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some rea-

son its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of prod-

ucts that contain lead, batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class "B" digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit "OFF" and "ON", please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please con-

tact Yamaha Corporation of America, Electronic Service Division,

6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

PSR-E433 Owner’s Manual

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge

som den ar ansluten till vägguttaget, även om själva apparaten

har stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE

afbrudt, sålænge netledningen sidder i en stikkontakt, som er

tændt — også selvom der er slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita

koko laitetta verkosta.

(standby)

The name plate of this product may be found on the bottom of

the unit. The serial number of this product may be found on or

near the name plate. You should note this serial number in the

space provided below and retain this manual as a permanent

record of your purchase to aid identification in the event of

theft.

Model No.

Serial No.

(bottom)

Entsorgung leerer Batterien

(nur innerhalb Deutschlands)

Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte

Batterien oder Akkumulatoren dürfen nicht in den Hausmüll.

Sie können bei einer Sammelstelle für Altbatterien bzw.

Sondermüll abgegeben werden. Informieren Sie sich bei Ihrer

Kommune.

(battery)

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and elec-

tronic products and batteries should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable col-

lection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any

potential negative effects on human health and the environment which could otherwise arise from inappropriate

waste handling.

For more information about collection and recycling of old products and batteries, please contact your local munici-

pality, your waste disposal service or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further informa-

tion.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local

authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set

by the Directive for the chemical involved.

(weee_battery_eu_en)

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park,

Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Digital Keyboard

Model Name : PSR-E433

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception is

suspected.

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

(FCC DoC)

PSR-E433 Owner’s Manual

Quick Guide Reference AppendixSetting Up

Table of Contents

Special Features ..............................................................5

Compatible Format and Functions ...................................8

About the Manuals ...........................................................9

Included Accessories .......................................................9

Setting Up

Panel Controls and Terminals 10

Setting Up 12

Power Requirements......................................................12

Connecting Headphones or External Audio Equipment

...13

Connecting a Footswitch to the SUSTAIN jack..............13

Basic Operations 14

Turning the Power On/Off ..............................................14

Auto Power Off Function ................................................14

Selecting Operations......................................................14

Display Items 15

Quick Guide

Try Playing a Variety of Instrument Voices 16

Selecting a Main Voice...................................................16

Playing the “Grand Piano”..............................................16

Layering a Dual Voice ....................................................16

Playing a Split Voice in the Left Hand area....................17

Using the Metronome.....................................................18

Adding Harmony ............................................................19

Creating Arpeggios 20

Triggering the Arpeggio..................................................20

Changing the Arpeggio Type .........................................20

Creating Original Sounds via the Knobs 21

Selecting a Knob Effect Combination.............................21

Applying the Filter to the Main Voice..............................21

Playing Styles 22

Using the Music Database .............................................22

Playing with Patterns Like a DJ! 23

Playing Songs 24

Listening to a Demo Song..............................................24

Selecting and Playing Back a Song ...............................24

Song Fast Forward, Fast Reverse, and Pause ..............25

A-B Repeat.....................................................................25

Turning Each Track On/Off ............................................25

Using the Song Lesson Feature 26

Three Types of Song Lesson .........................................26

Practicing with Song Lesson ..........................................26

Making Practice Perfect—Repeat & Learn.....................27

Recording Your Performance 28

Track Structure of a Song. .............................................28

Quick Recording.............................................................28

Recording to a Specified Track ......................................29

Clearing a User Song.....................................................30

Clearing a Specified Track from a User Song................30

Memorizing Your Favorite Panel Settings 31

Memorizing Panel Settings to the Registration Memory

...31

Recalling Panel Settings from the Registration Memory

...31

Backup Parameters and Initialization 32

Backup Parameters........................................................32

Initialization ....................................................................32

Reference

Handy Performance Features 33

Selecting a Reverb Type................................................33

Selecting a Chorus Type................................................33

Pitch Controls—Transpose ............................................34

Pitch Controls—Tuning ..................................................34

Pitch Controls—the PITCH BEND wheel .......................34

Calling up Optimum Panel Settings ...............................34

Changing the Touch Sensitivity of the Keyboard ...........35

Selecting an EQ Setting for the Best Sound ..................35

Voice Settings 36

Selecting a Dual Voice...................................................36

Selecting a Split Voice ...................................................36

Voice Editing ..................................................................36

Parameters Assigned to the Knobs 37

Arpeggio Settings 39

Synchronizing an Arpeggio to Song/Style/Pattern

Playback—Arpeggio Quantize ...................................39

Holding the Arpeggio Playback via the Footswitch ........39

Styles (Auto Accompaniment) and Patterns 40

Style Variations—Sections.............................................40

Synchro Stop .................................................................41

Pattern Variations—Sections .........................................42

Changing the Tempo .....................................................42

Tap Start ........................................................................42

Adjusting the Volume of the Style or Pattern .................42

Setting the Split Point.....................................................43

Playing Chords Without Style Playback.........................43

Chord Types for Style Playback.....................................44

Looking Up Chords Using the Chord Dictionary ............45

Song Settings 46

BGM (Background Music) Playback ..............................46

Random Song Playback ................................................46

Tempo Setting of the Song ............................................47

Tap Start ........................................................................47

Song Volume .................................................................47

Melody Voice Setting of the Preset Song ......................47

The Functions 48

Basic Procedure in the Function Display .......................48

USB Flash Memory Operations 51

Connecting a USB Flash Memory..................................52

Formatting a USB Flash Memory...................................53

Saving User Data to a USB Flash Memory....................54

Saving a User Song as SMF to a USB Flash Memory...55

Loading User Data from a USB Flash Memory..............56

Loading a Style File .......................................................57

Deleting a User File in the USB Flash Memory..............58

Deleting a SMF File in the USB Flash Memory..............58

Exiting from a File Control display..................................59

Appendix

Troubleshooting ............................................................. 60

Specifications................................................................. 61

Index .............................................................................. 62

PSR-E433 Owner’s Manual

Setting Up

Special Features

Creating New Sounds

Page 21

By adjusting just two knobs you can add varying degrees of distortion, “sweet-

ness,” or other characteristics to a sound to change it subtly or drastically. Param-

eters that can be assigned to the knobs include effect, filter, envelope generator

and more. You can create new sounds in real time!

Arpeggio Function

Page 20

Similar to the arpeggio functions provided on some synthesizers, this function

automatically produces arpeggios (broken chords) when you simply play the

appropriate notes on the keyboard. A variety of arpeggios can be produced by

changing your fingering or the arpeggio type.

Play a Variety of Instrument Voices

Page 16

The instrument voice that sounds when you play the keyboard can be changed to

violin, flute, harp, or any of an extensive range of voices. You can change the

mood of a song written for piano, for example, by using violin to play it instead.

Experience a whole new world of musical variety.

Play Along with Styles

Page 22

Want to play with full accompaniment? Try the auto-accompaniment Styles.

The accompaniment styles provide the equivalent of a full backing band cover-

ing a wide variety of styles from waltzes to 8-beat to euro-trance ... and much

more. Select a style that matches the music you want to play, or experiment with

new styles to expand your musical horizons.

Try playing like a DJ by using the Patterns!

Page 23

The Pattern function lets you perform like a DJ. The Track Control lets you

enjoy various instrument combinations, and the Knobs let you control the tempo

and create various sounds.

The appropriate panel settings for each Pattern are pre-programmed to Registra-

tion Memory. Refer to page 34.

044

EuTrance

PSR-E433 Owner’s Manual

Setting Up

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the

following:

• Do not place the power cord near heat sources such as heaters or radiators. Also,

do not excessively bend or otherwise damage the cord, or place heavy objects on

it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 61) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as

water seeps into the instrument, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may fall

over and cause a fire.

• Follow the precautions below. Failure to do so might result in explosion, fire,

overheating or battery fluid leakage.

- Do not tamper with or disassemble batteries.

- Do not dispose of batteries in fire.

- Do not attempt to recharge batteries that are not designed to be charged.

- Keep the batteries separate from metallic objects such as necklaces, hairpins,

coins, and keys.

- Use the specified battery type (page 12) only.

- Use new batteries, all of which are the same type, same model, and made by

the same manufacturer.

- Always make sure all batteries are inserted in conformity with the +/- polarity

markings.

- When the batteries run out, or if the instrument is not to be used for a long

time, remove the batteries from the instrument.

- When using Ni-MH batteries, follow the instructions that came with the

batteries. Use only the specified charger device when charging.

• Keep batteries away from small children who might accidentally swallow them.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid

should come in contact with your eyes, mouth, or skin, wash immediately with

water and consult a doctor. Battery fluid is corrosive and may possibly cause loss

of sight or chemical burns.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. (If you are using batteries,

remove all batteries from the instrument.) Then have the device inspected by

Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

Battery

If you notice any abnormality

DMI-5 1/2

PSR-E433 Owner’s Manual

Setting Up

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected cables, to prevent damage

to the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching the stand or rack,

use the provided screws only. Failure to do so could cause damage to the internal

components or result in the instrument falling over.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the

desired listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel or

keyboard. This could cause physical injury to you or others, damage to the

instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the

possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

 Saving data

• Some data items (page 32) are automatically saved as backup data in the internal memory even if you turn the power off. Saved data may be lost due to malfunction or incorrect

operation. Save important data to external device such as a USB flash memory (page 51).

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others' copyrights.

Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of

such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON'T MAKE, DISTRIBUTE OR

USE ILLEGAL COPIES.

 About functions/data bundled with the instrument

• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.

 About this manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Power supply/AC power adaptor

Location

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or

destroyed.

DMI-5 2/2

PSR-E433 Owner’s Manual

Setting Up

Compatible Format and Functions

GM System Level 1

“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible

music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer.

The GM mark is affixed to all software and hardware products that support GM System Level.

XGlite

As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation for-

mat. Naturally, you can play back any XG song data using an XGlite tone generator. However, keep in

mind that some songs may play back differently compared to the original data, due to the reduced set of

control parameters and effects.

USB

USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with

peripheral Devices. It allows “hot swapping” (connecting peripheral devices while the power to the

computer is on).

STYLE FILE

The Style File Format is Yamaha’s original style file format which uses a unique conversion system to

provide high-quality automatic accompaniment based on a wide range of chord types.

PSR-E433 Owner’s Manual

Setting Up

About the Manuals

This instrument has the following documents and instructional materials.

 Included Documents

Owner’s Manual (this book)

• Setting Up Please read this section first.

• Quick Guide This section explains how to use the basic functions. Refer to this section while

playing the instrument.

• Reference This section explains how to make detailed settings for the various functions of

the instrument.

• Appendix This section includes troubleshooting information and specifications.

Data List

Contains various important preset content lists such as those of Voices, Styles, Patterns and Effects.

 Online Materials (from Yamaha Manual Library)

MIDI Reference

Contains MIDI related information such as MIDI Data Format and the MIDI Implementation Chart.

MIDI Basics (only in English, French, German and Spanish)

Contains basic explanations about MIDI.

Computer-related Operations

Includes instructions on connecting this instrument to a computer, and operations related to transferring song

data.

To obtain these manuals, access the Yamaha Manual Library, enter “PSR-E433” or “MIDI Basics” to the Model

Name box, then click [SEARCH].

Yamaha Manual Library http://www.yamaha.co.jp/manual/

 Online Materials (for Yamaha Online members)

Song Book (only in English, French, German and Spanish)

Contains music scores for the preset Songs (excluding the Demo Songs) of this instrument. After completing the

user registration at the website below, you can download this Song Book free of charge.

Yamaha Online Member https://member.yamaha.com/myproduct/regist/

You will need the PRODUCT ID on the sheet (“Online Member Product Registration”) packaged with this

manual in order to fill out the User Registration form.

Included Accessories

• Owner’s Manual (this book)

• Data List

• AC Power Adaptor

• Music Rest

• Online Member Product Registration

*1: May not be included depending on your particular

locale. Check with your Yamaha dealer.

*2: The PRODUCT ID on the sheet will be needed when

you fill out the User Registration form.

Insert the music rest

into the slots as

shown.

Music Rest

PSR-E433 Owner’s Manual

Setting Up

Panel Controls and Terminals

Front Panel

q [MASTER VOLUME] control ................Page 14

w PITCH BEND wheel..............................Page 34

e [ ] (Standby/On) switch ....................Page 14

r LIVE CONTROL section

[ASSIGN] button ...............................Page 21

[A] and [B] knobs .............................Page 21

t [DEMO) button......................................Page 24

y [LESSON] button..................................Page 26

u [REC] button.........................................Page 28

i [METRONOME] button.........................Page 18

o TEMPO section

[TAP] button ......................................Page 42

[-] and [+] buttons .............................Page 42

!0 [PORTABLE GRAND] button ...............Page 16

!1 VOICE CONTROL section

[SPLIT] button...................................Page 17

[DUAL] button ...................................Page 16

[HARMONY] button ..........................Page 19

[ARPEGGIO] button..........................Page 20

!2 Playback Control buttons

• When the [PATTERN] lamp is turned on:

................................ Pages 23 and 42

• When the [SONG] lamp is turned on:

..............................................Page 25

• When the [STYLE] lamp is turned on:

.........................Pages 22, 40, and 41

GrandPno

001

t y u i

o !1

!2 !3

Front Panel

Display (page 15)

Setting Up

PSR-E433 Owner’s Manual

Panel Controls and Terminals

Setting Up

!3 [TRACK CONTROL] buttons

• When the [PATTERN] lamp is turned on:

..............................................Page 23

• When the [SONG] lamp is turned on:

..............................................Page 25

• When the [STYLE] lamp is turned on:

..............................................Page 41

!4 [PATTERN] button ................................Page 23

!5 [SONG] button......................................Page 24

!6 [STYLE] button .....................................Page 22

!7 [VOICE] button .....................................Page 16

!8 [MUSIC DATABASE] button.................Page 22

!9 [CATEGORY] buttons...........................Page 14

@0 [REGIST MEMORY] buttons ................Page 31

@1 [FUNCTION] button..............................Page 48

@2 Number buttons [1]–[9], [-/NO],

[0/EXECUTE] and [+/YES] buttons .....Page 14

@3 Drum illustrations for the Drum Kit....Page 16

Each of these indicates the drum or percussion instrument

assigned to the corresponding key for “Standard Kit 1.”

Rear Panel

@4 USB terminals

USB TO HOST terminal*...................Page 50

USB TO DEVICE terminal ................Page 51

@5 SUSTAIN jack .......................................Page 13

@6 PHONES/OUTPUT jack........................Page 13

@7 Power supply jack................................Page 12

* For connecting to a computer. For details, refer to “Computer-

related Operations” (page 9). When connecting, use an AB type

USB cable of less than 3 meters. USB 3.0 cables cannot be

used.

!4 !5 !6 !7 !9

@6 @7

Rear Panel

Style List (Data List) Voice List (Data List) Pattern List (Data List)Dial (page 14)

Song List (Data List)

“Press & Hold” symbol

By holding down one of the

buttons having this symbol, you

can call up an alternate function,

other than the one called up

when simply pressing.

PSR-E433 Owner’s Manual

Setting Up

Power Requirements

Although the instrument will run either from an

optional AC adaptor or batteries, Yamaha recom-

mends use of an AC adaptor whenever possible. An

AC adaptor is more environmentally friendly than bat-

teries and does not deplete resources.

Using an AC Power Adaptor

1 Make sure that the power of the instrument is off

(display is blank, except for notation staff).

2 Connect the AC adaptor to the power supply jack.

3 Plug the AC adaptor into an AC outlet.

Using Batteries

This instrument requires six “AA” size, Alkaline

(LR6)/Manganese (R6) batteries, or rechargeable

nickel-metal hydride batteries (rechargeable Ni-MH

batteries). The Alkaline batteries or rechargeable Ni-

MH batteries are recommended for this instrument,

since other types may result in poorer battery perfor-

mance.

 Installing the batteries

1 Make sure that the power of the instrument is off

(display is blank, except for notation staff).

2 Open the battery compartment cover located on the

instrument’s bottom panel.

3 Insert the six new batteries, being careful to follow

the polarity markings on the inside of the compart-

ment.

4 Replace the compartment cover, making sure that it

locks firmly in place.

When battery power becomes too low for proper oper-

ation, the volume may be reduced, the sound may be

distorted, and other problems may occur. When this

happens, make sure to replace all batteries with new

ones or already-recharged ones.

• Use the specified adaptor (page 61) only. Using the

wrong adaptor can result in damage to the instrument

or overheating.

• When setting up the product, make sure that the AC

outlet you are using is easily accessible. If some trou-

ble or malfunction occurs, immediately turn off the

power switch and disconnect the plug from the outlet.

Even when the power switch is turned off, electricity is

still flowing to the product at the minimum level. When

you are not using the product for a long time, make

sure to unplug the power cord from the wall AC outlet.

• When using Ni-MH batteries, follow the instructions that

came with the batteries. Use only the specified charger

device when charging.

WARNING

CAUTION

AC outlet

AC power

adaptor

WARNING

• Connecting or disconnecting the power adaptor with bat-

teries installed may turn the power off, resulting in loss of

data being recorded or transferred at the time.

• This instrument cannot charge the batteries. Use only the

specified charger device when charging.

• Power will be automatically drawn from the AC adaptor if an

AC adaptor is connected while batteries are installed in the

instrument.

NOTICE

NOTE

PSR-E433 Owner’s Manual

Setting Up

 Setting the battery type

After installing the new batteries then turning the

power on, make sure to set the Battery Type to

Rechargeable type or not. For details, refer to page 50.

 Checking the power status on the

display

 Power source on the display

You can confirm the power source at the left corner of

the display.

When is shown, the power is supplied from the

AC power adaptor. When is shown, the power is

supplied from the batteries. When the AC power adap-

tor is connected with the batteries installed, the power

is supplied from the AC power adaptor and the

indication is shown.

 Remaining battery power indication

You can confirm the approximate amount of remain-

ing battery power at the top left of the display.

Connecting Headphones or

External Audio Equipment

Any pair of stereo headphones with a 1/4” stereo

phone plug can be plugged in here for convenient

monitoring. The speakers are automatically shut off

when a plug is inserted into this jack.

The PHONES/OUTPUT jack also functions as an

external output. You can connect the PHONES/OUT-

PUT jack to a keyboard amplifier, stereo system,

mixer, tape recorder, or other line-level audio device

to send the instrument’s output signal to that device.

Connecting a Footswitch to the

SUSTAIN jack

You can produce a natural sustain as you play by

pressing an optional Footswitch plugged into the

[SUSTAIN] jack.

• Failure to set the Battery Type may shorten the amount of

the battery life. Make sure to set the Battery Type correctly.

Indicates that the power will be turned off

immediately. When rechargeable batteries are

used, this icon flashes before the power is

turned off.

Indicates that remaining power is insufficient

for operation. Before the power runs out,

replace all the batteries with new ones, or fully

recharged ones (when using rechargeable

types). Note that the instrument may not work

properly, including unusually soft volume and

poor sound quality when remaining power

becomes low.

Indicates that the remaining power is suffi-

cient.

NOTICE

Only one of these is shown.

GrandPno

• Do not use the instrument/device or headphones for a long

period of time at a high or uncomfortable volume level,

since this can cause permanent hearing loss. If you experi-

ence any hearing loss or ringing in the ears, consult a phy-

sician.

• Before connecting the instrument to other electronic com-

ponents, set all volume levels to the minimum, then turn

off the power for all components.

• When the instrument’s sound is output to an external

device, first turn on the power to the instrument, then to

the external device. Reverse this order when you turn the

power off.

• The sustain function does not affect split voices (page 17).

• Make sure that the footswitch plug is properly connected to

the SUSTAIN jack before turning on the power.

• Do not press the footswitch while turning the power on. Doing

this changes the recognized polarity of the footswitch, result-

ing in reversed footswitch operation.

CAUTION

NOTICE

NOTE

PSR-E433 Owner’s Manual

Setting Up

Basic Operations

Turning the Power On/Off

Turn down the MASTER VOLUME control to “MIN”

then press the [ ] (Standby/On) switch to turn on the

power. While playing the keyboard, adjust the MAS-

TER VOLUME control. To turn off the power, press

the [ ] (Standby/On) switch again for a second.

Auto Power Off Function

To prevent unnecessary power consumption, this

instrument features an Auto Power Off function that

automatically turns the power off if the instrument is

not operated for a specified period of time. The amount

of time that will elapse before the power is automati-

cally turned off is set by default to 30 minutes.

 To disable the Auto Power Off function:

Turn off the power, then press the [ ] (Standby/On)

switch to turn on the power while holding down the

lowest key.

 To set the time that elapses before Auto

Power Off is executed:

Press the [FUNCTION] button, press the CATEGORY

[+] or [-] button several times until “Auto Power Off”

appears then select the desired value.

Settings: OFF, 5, 10, 15, 30, 60, 120

Default value: 30

Selecting Operations

Before operating the instrument, it may be helpful to

familiarize yourself with the basic controls below that

are used to select items and change values.

 Dial

Rotate the dial clockwise to

increase the value, or counter-

clockwise to decrease the

value.

 Number buttons

Use the Number buttons to directly enter an item or

value. For numbers that start with one or two zeroes,

the first zeroes can be omitted.

 [-] and [+] buttons

Press the [+] button briefly to increase the value by 1, or

press the [-] button briefly to decrease the value by 1.

Press and hold either button to continuously increase or

decrease the value in the corresponding direction.

 CATEGORY buttons

Use these buttons to jump to the

first Voice, Style, or Song in the

next or previous Category, and call

up the next or previous Function

sequentially.

• When using a power adaptor, even when the power is off, a

small amount of electricity is still being consumed by the

instrument. When you are not using the instrument for a

long time, make sure to unplug the AC power adaptor from

the wall AC outlet.

• Generally, the data and settings are maintained even when the

power is turned off. For details, see page 32.

• Depending on the instrument status, the power may not

turn off automatically, even after the elapse of the specified

period of time. Always turn off the power manually when

the instrument is not in use.

CAUTION

NOTE

NOTICE

• When the instrument is not operated for a specified period

of time while connected to an external device such as an

amplifier, speaker or computer, make sure to follow the

instructions in the Owner’s Manual to turn off the power to

the instrument and the connected devices, in order to pro-

tect the devices from damage. If you do not want the

power to turn off automatically when a device is con-

nected, disable Auto Power Off.

IncreaseDecrease

Press number buttons

[0], [0], [3].

Example: Selecting Voice 003,

Bright Piano.

Press briefly to

increase.

Press briefly to

decrease.

PSR-E433 Owner’s Manual

Setting Up

Display Items

The display shows all the current settings of the Song, Style Pattern, Voice and other

related functions.

GrandPno

001

This area indicates the on/off status of

each function. Each indication is

shown when the corresponding func-

tion is turned on.

Page 17

Page 16

Page 19

Page 20

Page 35

Page 22

Page 41

On/off status

Normally this indicates the notes you play.

When the Song Lesson function is used, this

indicates the current notes and chord of play-

back. When the Dictionary function is used,

this indicates the notes of the chord you specify.

Notation

• Any notes occurring below or above the staff are

indicated by “8va.”

• For a few specific chords, not all notes may be

shown, due to space limitations in the display.

NOTE

Indicates the source from which this

instrument obtains power, AC power

adaptor or batteries. (Page 13)

Appears when USB flash memory is

connected to this instrument. (Page 51)

Power source status

USB connection status

Indicates the current beat of playback. (Page 24)

Indicates the parameters currently assigned to the

Knobs. (Page 21)

Indicates the Function number when the [FUNC-

TION] button is pressed, or the current Measure

number during playback of a Song, Style or Pattern.

Indicates the chord which is being played on the key-

board (Page 22) or specified via Song playback.

Indicates the on/off status of the current

Song, Style or Pattern. (Pages 23, 28,

41)

Beat

Knob assignment

FUNCTION and MEASURE

Chord

Track status

001

PSR-E433 Owner’s Manual

Quick Guide

Try Playing a Variety of Instrument Voices

In addition to piano, organ, and other “standard” keyboard instruments, this instru-

ment has a large range of voices that includes guitar, bass, strings, sax, trumpet,

drums and percussion, and even sound effects—giving you a wide variety of musical

sounds.

Press the [VOICE] button.

The Voice number and name will be shown.

Use the dial to select the desired Voice.

Play the keyboard.

Preset Voice Types

When you want to reset various settings to default and

simply play a Piano sound, press the [PORTABLE

GRAND] button.

The Voice number is set to 001 Grand Piano and all

the settings such as Dual and Split are turned off auto-

matically, with exception of the Touch Sensitivity

(page 35).

In addition to the Main Voice, you can layer a differ-

ent Voice over the entire keyboard as a “Dual Voice.”

Press the [DUAL] button to turn Dual on.

Press the [DUAL] button again to exit

from Dual.

Although turning on Dual will select a Dual Voice

suitable for the current Main Voice, you can easily

select a different Dual Voice (page 36).

Selecting a Main Voice

001–206 Instrument Voices.

207–229

(Drum Kit)

Various drum and percussion sounds are

assigned to individual keys. Details on assign-

ing instruments to keys are provided in the

Drum Kit List of the separate Data List.

230–269 Used for arpeggio performance (page 20).

GrandPno

001

Appears after the [VOICE]

button is pressed.

Voice name

Voice number

Flute

148

Select 148 Flute

Playing the “Grand Piano”

Layering a Dual Voice

Flute

148

Two voices will

sound at the

same time.

Appears when

dual voice is on

Quick Guide

Try Playing a Variety of Instrument Voices

PSR-E433 Owner’s Manual

Quick Guide

By dividing the keyboard into the two separate areas,

you can play a different Voice between the Left hand

and Right hand areas.

Press the [SPLIT] button to turn on Split.

The keyboard is divided into the Left hand and

Right hand areas.

You can play a “Split Voice” on the Left hand area

of the keyboard while playing a Main Voice and

Dual Voice on the Right hand area of the key-

board.

The highest key for the Left hand area is referred

to as the “Split Point” which can be changed from

the default F#2 key. For details, refer to page 36.

Press the [SPLIT] button again to exit

from Split.

You can easily select a different Split Voice (page 36).

Playing a Split Voice in the Left

Hand area

Flute

148

Appears when split

voice is on

Split voice Main voice and

dual voice

Split Point

Try Playing a Variety of Instrument Voices

PSR-E433 Owner’s Manual

Quick Guide

The instrument features a built-in metronome (a

device that keeps an accurate tempo), convenient for

practicing.

Press the [METRONOME] button to start

the metronome.

Press the [METRONOME] button again

to stop the metronome.

Adjusting the Metronome Tempo

Press the TEMPO [TAP] button to call up the Tempo

value, then use the TEMPO [-] and [+] buttons to

adjust the Tempo value.

The dial and the Number buttons can also be used to

set the Tempo.

Setting the Time Signature

Here, we’ll set a time signature of 5/8 as an example.

Hold down the [METRONOME] button

for longer than a second to call up

“TimeSigN” (Time Signature Numera-

tor).

The number of beats per measure is shown on the

display.

Rotate the dial to select the number of

beats per measure.

A chime will sound on the first beat of each mea-

sure while the other beats will click. If “0” is

selected, all beats will simply click with no chime.

Select 5 for this example.

Press the CATEGORY [+] button to call

up “TimeSigD” (Time Signature Denom-

inator).

The length of one beat is shown on the display.

Rotate the dial to select the length of

one beat, from 2

, 4

, 8

and 16

note.

Select “08” (8

note) for this example.

Confirm the setting by playing the Met-

ronome.

Setting the Metronome Volume

Press the [FUNCTION] button.

Press the CATEGORY [+] or [-] buttons

repeatedly until “MtrVol” appears.

Rotate the dial to set the Metronome Vol-

ume.

Using the Metronome

Tempo

090

Current Tempo value

TimeSigN

Number of beats

per measure.

Hold for longer

than a second.

• This parameter cannot be set during playback of a Style,

Song or Pattern.

NOTE

TimeSigD

The length

of one beat.

MtrVol

100

053

Metronome volume

Try Playing a Variety of Instrument Voices

PSR-E433 Owner’s Manual

Quick Guide

You can add harmony notes to the Main Voice.

Press the [HARMONY] button to turn

Harmony on.

Although turning on the Harmony will select a

Harmony Type suitable for the current Main

Voice, you can select a different Harmony Type.

Hold down the [HARMONY] button for

longer than a second until “HarmType”

appears on the display.

After “HarmType” is shown for a few seconds, the

current Harmony Type appears.

Rotate the dial to select the desired Har-

mony Type.

For details, refer to the separate Data List.

The effect and operation differs depending on the

Harmony Type. Refer to the section below.

You can adjust the Harmony Volume in the Function

Settings (page 49).

Adding Harmony

Appears when the Harmony

is turned on.

HarmType

038

Hold for longer

than a second.

Trio

038

Current Harmony Type

How to sound each Harmony Type

• Harmony type 01 to 05

Press the right-hand keys while playing chords in

the auto accompaniment range of the keyboard

when the Auto Accompaniment is on (page 22).

• Harmony type 06 to 12 (Trill)

Hold down two keys.

• Harmony type 13 to 19 (Tremolo)

Keep holding

down the keys.

• Harmony type 20 to 26 (Echo)

PSR-E433 Owner’s Manual

Quick Guide

Creating Arpeggios

The Arpeggio function lets you create arpeggios (broken chords) by simply pressing

the notes of the chord. For example, you could play the notes of a triad—the root, third,

and fifth—to trigger interesting phrases. This feature can be used for music production

as well as performance.

Press the [ARPEGGIO] button to turn on

the Arpeggio function.

Press a note or notes to trigger Arpeg-

gio.

The Arpeggio phrase differs depending on the

number of pressed notes and the area of the key-

board.

When Split is on, Arpeggio is applied only to the

Split Voice. When Split is off, Arpeggio is applied

to the Main and Dual Voices. Arpeggio cannot be

applied to the Split and Main/Dual Voices simulta-

neously.

For instructions on selecting a Split Voice, refer to

page 36.

Note that selecting one of the Main Voices 260–

269 will call up the appropriate Split Voice.

To turn off the Arpeggio, press the

[ARPEGGIO] button again.

The most suitable Arpeggio Type is automatically

selected when you select a Main Voice, but you can

easily select any other Arpeggio Type.

Hold down the ARPEGGIO [TYPE] but-

ton for longer than a second.

In the display, “ARP Type” appears for a few sec-

onds, followed by the current Arpeggio Type

appears.

Rotate the dial to select the desired

Arpeggio type

An Arpeggio Type List is provided in the separate

Data List.

Triggering the Arpeggio

• Selecting a Voice number between 230 and 269 will turn

on Arpeggio automatically.

• When you select a Voice between 260 and 269, play a

key to the left of the Split Point, since Arpeggio is applied

only to the Split Voice.

• When an optional Footswitch (page 13) connected to the

SUSTAIN jack is pressed, the Arpeggio will continue to

play after the note is released (page 39).

Flute

148

NOTE

Changing the Arpeggio Type

Hold for longer

than a second.

DownOct

002

The currently selected arpeggio

type

Pagina se încarcă ...

Yamaha PSR-E433 Manualul proprietarului

Marca: Yamaha

Model: PSR-E433

Categorie: Tastaturi

Tip: Manualul proprietarului

Descărcați PDF

raport

în alte limbi

Türkçe: Yamaha PSR-E433 El kitabı
français: Yamaha PSR-E433 Le manuel du propriétaire
čeština: Yamaha PSR-E433 Návod k obsluze
русский: Yamaha PSR-E433 Инструкция по применению
English: Yamaha PSR-E433 Owner's manual
suomi: Yamaha PSR-E433 Omistajan opas
polski: Yamaha PSR-E433 Instrukcja obsługi
Deutsch: Yamaha PSR-E433 Bedienungsanleitung
italiano: Yamaha PSR-E433 Manuale del proprietario
español: Yamaha PSR-E433 El manual del propietario
svenska: Yamaha PSR-E433 Bruksanvisning
dansk: Yamaha PSR-E433 Brugervejledning
português: Yamaha PSR-E433 Manual do proprietário
Nederlands: Yamaha PSR-E433 de handleiding

Lucrări conexe

Alte documente

Hikoki UR18DSL2 Manual de utilizare