Hama 00200007 Manual de utilizare

Tip
Manual de utilizare
92WUniversal USB-C Notebook Power Supply
Universal-USB-C-Notebook-Netzteil
00
200007
E
SK
F
D
GB
I
S
PL
RUS
H
BG
CZ
TR
FIN
RO
GR
NL
P
Operating Instructions
Bedienungsanleitung
Mode d‘emploi
Instrucciones de uso
Gebruiksaanwijzing
Istruzioni per l‘uso
Instrukcja obsługi
Használati útmutató
Manual de utilizare
Návod k použití
Návod na použitie
Manual de instruções
Bruksanvisning
Руководство по эксплуатации
Работна инструкция
Οδηγίες χρήσης
Kullanma kılavuzu
Käyttöohje
VOLTAGE ADJUSTMENT
S M A R T
AUTOMATIC
VOLT
1 2
1
3
2
2
GOperating instruction
1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching product parts carrying hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specic hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package contents
Universal USB-C notebook power supply unit
USB-C cable
These operating instructions
3. Safety instructions
Use the product only for the intended purpose.
Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
Ensure there is sucient scope for heat dissipation and
ventilation.
Only use the article under moderate climatic conditions.
Do not use the product in areas in which electronic
products are not permitted.
Do not use the product in a damp environment and
avoid splashing water.
Do not short-circuit the battery of the opened terminal
device. There is a risk of explosion.
Protect the product from dirt, moisture and overheating
and use it in dry environments only.
Do not drop the product and do not expose it to any
major shocks.
Do not operate the product outside the power limits
specied in the technical data.
Always pull directly on the plug when disconnecting the
cable, never on the cable itself.
Make sure that cables do not pose a tripping hazard or
block emergency exits.
Do not bend or crush the cable.
As with all electrical products, this device should be kept
out of the reach of children.
Do not modify the device in any way. Doing so voids the
warranty.
Keep the packaging material out of the reach of children
due to the risk of suffocation.
Dispose of packaging material immediately in
accordance with the locally applicable regulations.
Make sure that the connected device meets the
requirements for supply through class PS3 power sources.
If there is any doubt, ask your device manufacturer.
Risk of electric shock
Do not open the device or continue to operate it if it
becomes damaged.
Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
Do not attempt to service or repair the product
yourself. Leave any and all service work to qualied
experts.
4. Start-up and operation
Note – mains voltage 100 – 240V
The power supply unit is suitable for mains voltages
of 100 – 240V and therefore can be used worldwide.
Please note that a country-specic adapter may be
necessary.
Ensure that your notebook requires a supply voltage of
5V / 9V / 12V / 15V / 20V (+/- 1 Volt).
You can nd this information on the original power
supply unit or in your terminal device's operating
manual. If necessary, ask the dealer who supplied
your terminal device or contact your terminal device
manufacturer's support service.
Warning
Do not use the universal notebook power supply unit if
you are unable to denitively determine your terminal
device's supply voltage.
Ensure that the notebook's total power consumption
does not exceed the power supply unit's rated output
of 92W.
Failure to comply with this may cause damage to
the universal notebook power supply unit and the
connected terminal device!
3
Note the instructions in your device's operating manual.
If these do not contain any instructions expressly to the
contrary, proceed as follows:
Note – Power Delivery
Plug & GO: no additional software required, simply
plug in and start:
Thanks to Power Delivery/Thunderbolt™ 3/Quick
Charge, the voltage and power are adjusted
automatically.
Be aware that, for ecient and optimised charging,
your terminal device must support the PD (Power
Delivery)/TBT3 (Thunderbolt™ 3)/QC (Quick Charge)
function.
If you have a large number of PD/TBT3/QC-enabled
terminal devices with different rmware updates, it
may be that the function is not fully supported.
Warning
Only operate the product from a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
Disconnect the product from the power supply using
the On/Off switch – if this is not available, unplug the
power cord from the socket.
If using a multi-socket power strip, make sure that the
total power consumption of all connected devices does
not exceed the power strip's maximum throughput
rating.
Connect the power cord to the power supply unit and
your terminal device.
Then connect the mains plug to a properly installed
socket.
The terminal device can now be used and switched on /
charged.
Note
Disconnect the product from the mains after use.
5. Care and Maintenance
Note
Disconnect the product from the mains before cleaning.
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
Ensure that no water is able to enter the product.
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
7. Technical data
Ambient temperature 0° – 35°C
Specications in accordance with
Regulation (EU) 2019/1782
Manufacturer’s name or trade
mark, commercial registration
number and address
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Model identier 00200007
Input voltage 100 – 240V
Input AC frequency 50/60Hz
Output voltage/
Output current/
Output power
5.0 V DC / 3.0 A / 15.0 W
9.0 V DC / 3.0 A / 27.0 W
12.0 V DC / 3.0 A / 36.0 W
15.0 V DC / 3.0 A / 45.0 W
20.0 V DC / 4.6 A / 92.0 W
Average active eciency 81.4 %
Eciency at low load (10 %) 79.2 %
No-load power consumption 0.10 W
4
DBedienungsanleitung
1. Erklärung von Warnsymbolen und Hinweisen
Gefahr eines elektrischen Schlages
Dieses Symbol weist auf eine Berührungsgefahr mit nicht
isolierten Teilen des Produktes hin, die möglicherweise
eine gefährliche Spannung von solcher Höhe führen,
dass die Gefahr eines elektrischen Schlags besteht.
Warnung
Wird verwendet, um Sicherheitshinweise zu
kennzeichnen oder um Aufmerksamkeit auf besondere
Gefahren und Risiken zu lenken.
Hinweis
Wird verwendet, um zusätzlich Informationen oder
wichtige Hinweise zu kennzeichnen.
2. Packungsinhalt
Universal-USB-C-Notebook-Netzteil
Netzkabel
Diese Bedienungsanleitung
3. Sicherheitshinweise
Verwenden Sie das Produkt ausschließlich für den dazu
vorgesehenen Zweck.
Betreiben Sie das Produkt nicht in unmittelbarer Nähe
der Heizung, anderer Hitzequellen oder in direkter
Sonneneinstrahlung.
Achten Sie auf ausreichende Möglichkeit zur
Wärmeableitung und Belüftung.
Verwenden Sie den Artikel nur unter moderaten
klimatischen Bedingungen.
Benutzen Sie das Produkt nicht in Bereichen, in denen
elektronische Produkte nicht erlaubt sind.
Verwenden Sie das Produkt nicht in einer feuchten
Umgebung und vermeiden Sie Spritzwasser.
Schließen Sie den Akku des geöffneten Endgerätes nicht
kurz. Es besteht Explosionsgefahr!
Schützen Sie das Produkt vor Schmutz, Feuchtigkeit und
Überhitzung und verwenden Sie es nur in trockenen
Umgebungen.
Lassen Sie das Produkt nicht fallen und setzen Sie es
keinen heftigen Erschütterungen aus.
Betreiben Sie das Produkt nicht außerhalb seiner in den
technischen Daten angegebenen Leistungsgrenzen.
Ziehen Sie zum Entfernen des Kabels direkt am Stecker
und niemals am Kabel.
Verlegen Sie alle Kabel so, dass keine Stolpergefahr
entsteht oder Fluchtwege blockiert werden!
Knicken und quetschen Sie das Kabel nicht.
Dieses Produkt gehört, wie alle elektrischen Produkte,
nicht in Kinderhände!
Nehmen Sie keine Veränderungen am Gerät vor. Dadurch
verlieren Sie jegliche Gewährleistungsansprüche.
Halten Sie Kinder unbedingt von dem
Verpackungsmaterial fern, es besteht Erstickungsgefahr.
Entsorgen Sie das Verpackungsmaterial sofort gemäß
den örtlich gültigen Entsorgungsvorschriften.
Gefahr eines elektrischen Schlages
Öffnen Sie das Produkt nicht und betreiben Sie es bei
Beschädigungen nicht weiter.
Verwenden Sie das Produkt nicht, wenn der AC-
Adapter, das Adapterkabel oder die Netzleitung
beschädigt sind.
Versuchen Sie nicht, das Produkt selbst zu warten oder
zu reparieren. Überlassen Sie jegliche Wartungsarbeit
dem zuständigen Fachpersonal.
4. Inbetriebnahme und Betrieb
Hinweis – Netzspannung 100 – 240V
Das Netzteil ist für eine Netzspannung von 100 – 240V
geeignet und daher weltweit einsetzbar. Beachten Sie,
dass hierzu ein länderspezischer Adapter notwendig ist.
Stellen Sie sicher, dass Ihr Notebook eine
Versorgungsspannung von 5V / 9V / 12V / 15V / 20V
(+/- 1 Volt) benötigt.
Diese Information nden Sie auf dem Original-Netzteil
oder in der Bedienungsanleitung Ihres Endgerätes. Ggf.
erfragen Sie dies beim Händler Ihres Endgerätes oder
über den Support Ihres Endgeräteherstellers.
Warnung
Verwenden Sie das Universal-Notebook-Netzteil nicht,
wenn Sie die Versorgungsspannung Ihres Endgerätes
nicht zweifelsfrei bestimmen können.
Stellen Sie sicher, dass die Gesamtleistungsaufnahme
des Notebooks nicht die Nennausgangsleistung des
Netzteils von 92W überschreitet.
Bei Nichtbeachtung kann eine Beschädigung
des Universal-Notebook-Netzteils sowie des
angeschlossenen Endgerätes nicht ausgeschlossen
werden!
5
Beachten Sie die Hinweise in der Bedienungsanleitung
Ihres Endgerätes. Sollten diese nicht ausdrücklich andere
Anweisungen enthalten, verfahren Sie wie folgt:
Hinweis – Power Delivery
Plug & Go: Keine manuellen Einstellungen notwendig,
anschließen und starten:
Durch Power Delivery/Thunderbolt™ 3/Quick Charge
werden Spannung und Leistung automatisch
eingestellt.
Beachten Sie, dass für ezientes und optimiertes
Laden die PD (Power Delivery)/TBT3 (Thunderbolt™
3)/QC (Quick Charge) Funktion von Ihrem Endgerät
unterstützt werden muss.
Bei der großen Menge an PD/TBT3/QC-fähigen
Endgeräten mit unterschiedlichen Firmwareständen,
kann es vorkommen, dass die Funktion nicht
vollständig unterstützt wird.
Warnung
Betreiben Sie das Produkt nur an einer dafür
zugelassenen Steckdose. Die Steckdose muss in der
Nähe des Produktes angebracht und leicht zugänglich
sein.
Trennen Sie das Produkt mittels des Ein-/Ausschalters
vom Netz – wenn dieser nicht vorhanden ist, ziehen
Sie die Netzleitung aus der Steckdose.
Achten Sie bei Mehrfachsteckdosen darauf, dass
die angeschlossenen Verbraucher die zulässige
Gesamtleistungsaufnahme nicht überschreiten.
Verbinden Sie das Netzkabel mit dem Netzteil und Ihrem
Endgerät.
Verbinden Sie anschließend den Netzstecker mit einer
ordnungsgemäß installierten Steckdose.
Das Endgerät kann nun verwendet und eingeschaltet/
geladen werden.
Hinweis
Trennen Sie nach der Benutzung das Produkt vom Netz.
5. Wartung und Pflege
Hinweis
Trennen Sie das Produkt vor der Reinigung vom Netz.
Reinigen Sie dieses Produkt nur mit einem fusselfreien,
leicht feuchten Tuch und verwenden Sie keine
aggressiven Reiniger.
Achten Sie darauf, dass kein Wasser in das Produkt
eindringt.
6. Haftungsausschluss
Die Hama GmbH & Co KG übernimmt keinerlei Haftung
oder Gewährleistung für Schäden, die aus unsachgemäßer
Installation, Montage und unsachgemäßem Gebrauch
des Produktes oder einer Nichtbeachtung der
Bedienungsanleitung und/oder der Sicherheitshinweise
resultieren.
7. Technische Daten
Umgebungstemperatur 0° – 35°C
Angaben nach Verordnung (EU) 2019/1782
Handelsmarke,
Handelsregisternummer,
Anschrift
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Modellkennung 00200007
Eingangsspannung 100 – 240V
Eingangswechselstrom-
frequenz 50/60Hz
Ausgangsspannung/
Ausgangsstrom/
Ausgangsleistung
5.0 V DC / 3.0 A / 15.0 W
9.0 V DC / 3.0 A / 27.0 W
12.0 V DC / 3.0 A / 36.0 W
15.0 V DC / 3.0 A / 45.0 W
20.0 V DC / 4.6 A / 92.0 W
Durchschnittliche Ezienz
im Betrieb 81.4 %
Ezienz bei geringer Last
(10 %) 79.2 %
Leistungsaufnahme bei
Nulllast 0.10 W
6
FMode d‘emploi
1. Explication des symboles d’avertissement et des
remarques
Risque d’électrocution
Ce symbole indique un risque de contact avec des
parties non isolées du produit susceptibles de conduire
un courant électrique capable de provoquer une
électrocution.
Avertissement
Ce symbole est utilisé pour indiquer des consignes de
sécurité ou pour attirer votre attention sur des dangers et
risques particuliers.
Remarque
Ce symbole est utilisé pour indiquer des informations
supplémentaires ou des remarques importantes.
2. Contenu de l’emballage
Bloc secteur pour ordinateur portable universel USB-C
Câble secteur
Le présent mode d’emploi
3. Consignes de sécurité
L’emploi du produit est exclusivement réservé à sa
fonction prévue.
N’utilisez pas l’appareil à proximité immédiate d’un
chauffage, d’autres sources de chaleur ou à la lumière
directe du soleil.
Faites attention à ce que la dissipation de la chaleur et
l’aération soient susantes.
Utilisez l’article dans des conditions climatiques
modérées uniquement.
N’utilisez pas le produit dans des zones où les produits
électroniques ne sont pas autorisés.
N’utilisez pas l’appareil dans un environnement humide
et évitez les projections d’eau.
Ne court-circuitez pas la batterie de l’appareil ouvert.
Risque d’explosion !
Protégez le produit de toute saleté, humidité, surchauffe
et utilisez-le uniquement dans des environnements secs.
Protégez le produit des secousses violentes et évitez tout
choc ou toute chute.
N’utilisez pas le produit en dehors des limites de
puissance indiquées dans les caractéristiques techniques.
Pour retirer le câble, tirez directement au niveau de la
che et non du câble.
Posez les câbles de telle sorte qu’ils ne présentent aucun
risque de chute et ne bloquent aucune issue de secours !
Ne pliez pas et n’écrasez pas le câble.
Cet appareil, comme tout appareil électrique, doit être
gardé hors de portée des enfants !
N’apportez aucune modication à l’appareil. Des
modications vous feraient perdre vos droits de garantie.
Tenez les emballages d’appareils hors de portée des
enfants, risque d’étouffement.
Recyclez les matériaux d’emballage conformément aux
prescriptions locales en vigueur.
Risque d’électrocution
Ne tentez pas d’ouvrir le produit en cas de
détérioration et cessez de l’utiliser.
N’utilisez pas le produit lorsque l’adaptateur, le
câble de connexion ou le câble d’alimentation sont
endommagés.
Ne tentez pas de réparer l’appareil vous-même ni
d’effectuer des travaux d’entretien. Déléguez tous
travaux d’entretien à des techniciens qualiés.
4. Mise en service et fonctionnement
Remarque : tension secteur 100 – 240V
Le bloc secteur est adapté à une tension secteur de
100 – 240V et peut donc être utilisé dans le monde
entier. Veuillez toutefois noter qu’un adaptateur est
éventuellement nécessaire dans certains pays.
Assurez-vous que votre ordinateur portable nécessite une
tension d’alimentation de 5V / 9V / 12V / 15V / 20V
(+/- 1 volt).
Vous trouverez cette information sur le bloc secteur
d’origine ou dans le mode d’emploi de votre appareil. Le
cas échéant, posez la question au vendeur de l’appareil
ou au service clientèle du fabricant.
Avertissement
N’utilisez pas ce bloc secteur pour ordinateur universel
si vous ne pouvez pas déterminer avec précision la
tension d’alimentation de votre appareil.
Assurez-vous que la puissance absorbée totale de
l’ordinateur portable ne dépasse pas la puissance
nominale de sortie du bloc secteur de 92W.
En cas de non-respect de ces instructions, un
endommagement du bloc secteur pour ordinateur
portable universel ainsi que de l’appareil raccordé ne
peut être exclu !
7
Respectez les instructions du mode d’emploi de votre
appareil. Si celui-ci ne contient pas d’instructions
explicites, procédez comme suit :
Remarque : Power Delivery
Plug & Go : aucun réglage manuel n’est requis, il sut
de brancher l’ordinateur pour l’utiliser :
la tension et la puissance seront automatiquement
réglées via Power Delivery/Thunderbolt™ 3/Quick
Charge.
Notez que, pour un chargement ecace et optimisé, la
fonction PD (Power Delivery)/TBT3 (Thunderbolt™ 3)/
QC (Quick Charge) doit être prise en charge par votre
appareil.
Pour de nombreux appareils compatibles PD/TBT3/QC
avec des versions de Firmware différentes, il se peut
que cette fonction ne soit pas complètement prise en
charge.
Avertissement
Branchez l’appareil uniquement à une prise de
courant appropriée. La prise de courant doit être
située à proximité de l’appareil et doit être facilement
accessible.
Coupez l’appareil du secteur à l’aide de l’interrupteur
- débranchez la prise de courant en cas d’absence
d’interrupteur.
En cas de prises multiples, veillez à ce que les
appareils consommateurs branchés ne dépassent pas
la puissance absorbée totale admissible.
Reliez le cordon d’alimentation au bloc secteur et à votre
appareil.
Raccordez ensuite la che secteur à une prise électrique
correctement installée.
L’appareil peut désormais être utilisé et mis sous tension/
chargé.
Remarque
Après utilisation du produit, débranchez-le du réseau
électrique.
5. Maintenance et entretien
Remarque
Débranchez le produit du secteur avant de le nettoyer.
Nettoyez ce produit uniquement à l’aide d’un chiffon
non breux légèrement humide ; évitez tout détergent
agressif.
Veillez à ce que de l’eau ne pénètre pas dans le produit.
6. Exclusion de garantie
La société Hama GmbH & Co KG décline toute
responsabilité en cas de dommages causés par une
installation, un montage ou une utilisation non conforme
du produit ou encore par un non-respect du mode
d’emploi et/ou des consignes de sécurité.
7. Caractéristiques techniques
Température ambiante 0° – 35°C
Indications prévues par le règlement (CE)
2019/1782
Raison sociale ou marque dé
posée, numéro d’enregistre
ment au registre du commerce
et adresse du fabricant
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Référence du modèle 00200007
Tension d’entrée 100 – 240V
Fréquence du CA d’entrée 50/60Hz
Tension de sortie /
Courant de sortie/
Puissance de sortie
5.0 V DC / 3.0 A / 15.0 W
9.0 V DC / 3.0 A / 27.0 W
12.0 V DC / 3.0 A / 36.0 W
15.0 V DC / 3.0 A / 45.0 W
20.0 V DC / 4.6 A / 92.0 W
Rendement moyen en mode
actif 81.4 %
Rendement à faible charge
(10 %) 79.2 %
Consommation électrique
hors charge 0.10 W
8
EInstrucciones de uso
1. Explicación de los símbolos de aviso y de las
indicaciones
Peligro de sufrir una descarga eléctrica
Este símbolo hace referencia al peligro de contacto con
partes no aisladas del producto que pueden conducir
una tensión peligrosa de una intensidad tal que puede
provocar una descarga eléctrica.
Aviso
Se utiliza para indicar indicaciones de seguridad o para
llamar la atención sobre peligros y riesgos especiales.
Nota
Se utiliza para indicar información adicional o
indicaciones importantes.
2. Contenido del paquete
Fuente de alimentación USB-C universal para portátil
Cable de corriente
Este manual de instrucciones
3. Indicaciones de seguridad
Utilice el producto exclusivamente para el n previsto.
No utilice el producto junto a sistemas de calefacción,
otras fuentes de calor ni expuesto a la luz solar directa.
Asegúrese de que las condiciones del entorno sean
adecuadas para proporcionar una ventilación y una
disipación de calor sucientes.
Use el artículo únicamente cuando las condiciones
climáticas sean moderadas.
No utilice el producto en áreas donde no se permitan
aparatos electrónicos.
No utilice el producto en entornos húmedos y evite el
contacto con las salpicaduras de agua.
No cortocircuite la batería del terminal abierto. ¡Existe
peligro de explosión!
Proteja el producto de la suciedad, la humedad y el
sobrecalentamiento y utilícelo solo en entornos secos.
No deje caer el producto ni lo someta a sacudidas
fuertes.
No utilice el producto fuera de los límites de potencia
indicados en los datos técnicos.
Para sacar el cable, tire directamente de la clavija y
nunca del cable.
Tienda todos los cables de modo que no haya riesgo de
tropezar con ellos y que no bloqueen los caminos de
evacuación.
No pliegue ni aplaste el cable.
Este producto, como todos los productos eléctricos, no
debe estar en manos de los niños.
No realice cambios en el aparato; Esto conllevaría la
pérdida de todos los derechos de la garantía.
Mantenga el material de embalaje fuera del alcance de
los niños, ya que existe peligro de asxia.
Deseche el material de embalaje de conformidad con las
normativas locales vigentes en materia de eliminación
de desechos.
Peligro de sufrir una descarga eléctrica
No abra el producto ni siga utilizándolo en caso de
presentar daños.
No utilice el producto si el adaptador de corriente
alterna, el cable adaptador o el cable de alimentación
están dañados.
No intente mantener ni reparar el producto por
cuenta propia. Encomiende cualquier trabajo de
mantenimiento al personal especializado competente.
4. Puesta en marcha y funcionamiento
Nota: tensión de red de 100 – 240V
La fuente de alimentación es adecuada para una tensión
de red de entre 100 – 240Voltios, por lo que se puede
utilizar en todo el mundo. Recuerde que para ello se
necesita un adaptador especíco del país.
Asegúrese de que su portátil requiera una tensión de
alimentación de 5V / 9V / 12V / 15V / 20V (+/- 1 voltio).
Encontrará esta información en la fuente de alimentación
original o en el manual de instrucciones de su terminal.
En caso necesario, pregunte al distribuidor de su terminal
o al departamento de asistencia técnica del fabricante
del terminal.
Aviso
No use la fuente de alimentación universal para
portátil si no puede determinar la tensión de
alimentación de su terminal de manera inequívoca.
Asegúrese de que el consumo eléctrico total del
portátil no rebase la potencia nominal de salida de la
fuente de alimentación de 92W.
Si no observa estas indicaciones, no podrán
descartarse daños en la fuente de alimentación
universal para portátil ni en el terminal conectado.
9
Observe las indicaciones que se recojan en el manual de
instrucciones de su terminal; si estas no incluyen otras
instrucciones de manera expresa, proceda como se indica
a continuación:
Nota: Power Delivery
Plug & Go: no se requiere aplicar ajustes manuales;
bastará con conectar el terminal para poder empezar
a usarlo:
La tensión y la potencia se ajustan automáticamente
mediante Power Delivery/Thunderbolt™ 3/Quick
Charge.
Tenga en cuenta que su terminal deberá ser
compatible con la función PD (Power Delivery)/
TBT3 (Thunderbolt™ 3)/QC (Quick Charge) para que la
carga sea eciente y optimizada.
Debido a la gran cantidad de terminales compatibles
con la función PD/TBT3/QC y provistos de
actualizaciones de rmware distintas, es posible que
dicha función no pueda implementarse íntegramente.
Aviso
Utilice el producto solo conectado a una toma de
corriente autorizada. La toma de corriente debe estar
colocada cerca del producto; asimismo, debe ser
fácilmente accesible.
Desconecte el producto de la red eléctrica mediante
el interruptor de encendido y apagado (de no existir
este, desenchufe el cable de alimentación de la toma
de corriente).
Si dispone de tomas de corriente múltiples, asegúrese
de que los aparatos eléctricos conectados no
sobrepasen el consumo total de potencia admisible.
Conecte el cable de alimentación con la fuente de
alimentación y su terminal.
A continuación, conecte el enchufe a una toma de
corriente que esté instalada correctamente.
El terminal puede usarse ahora y encenderse o cargarse.
Nota
Desenchufe el producto de la red eléctrica después de
usarlo.
5. Mantenimiento y cuidado
Nota
Desenchufe el producto de la red eléctrica después de
limpiarlo.
Limpie este producto solo con un paño ligeramente
humedecido que no deje pelusas y no utilice detergentes
agresivos.
No deje que entre agua en el producto.
6. Exclusión de responsabilidad
La empresa Hama GmbH & Co KG no se responsabiliza
ni concede garantía alguna por los daños que se deriven
de una instalación, montaje o manejo incorrectos del
producto o por la inobservancia de las instrucciones de uso
o de las indicaciones de seguridad.
7. Datos técnicos
Temperatura ambiente 0° – 35°C
Datos según el Reglamento (UE) 2019/1782
Nombre o marca, número del
registro mercantil y dirección
del fabricante
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Identicador del modelo 00200007
Tensión de entrada 100 – 240V
Frecuencia de la CA de
entrada 50/60Hz
Tensión de salida /
Intensidad de salida/
Potencia de salida
5.0 V DC / 3.0 A / 15.0 W
9.0 V DC / 3.0 A / 27.0 W
12.0 V DC / 3.0 A / 36.0 W
15.0 V DC / 3.0 A / 45.0 W
20.0 V DC / 4.6 A / 92.0 W
Eciencia media en activo 81.4 %
Eciencia a baja carga (10 %) 79.2 %
Consumo eléctrico en vacío 0.10 W
10
NGebruiksaanwijzing
1. Verklaring van waarschuwingssymbolen en
instructies
Gevaar voor een elektrische schok
Dit symbool duidt op gevaar bij aanraking van niet-
geïsoleerde onderdelen van het product, welke mogelijk
onder een zodanig gevaarlijke spanning staan, dat het
gevaar voor een elektrische schok aanwezig is.
Waarschuwing
Wordt gebruikt om veiligheidsinstructies te markeren of
om op bijzondere gevaren en risico’s te attenderen.
Aanwijzing
Wordt gebruikt om extra informatie of belangrijke
aanwijzingen te markeren.
2. Inhoud van de verpakking
Universele USB-C-notebook-netadapter
Voedingskabel
Deze gebruiksaanwijzing
3. Veiligheidsinstructies
Gebruik het product alleen voor het beoogde doel.
Gebruik het product niet in de onmiddellijke nabijheid
van de verwarming, andere warmtebronnen of in direct
zonlicht.
Zorg voor voldoende warmteafvoer en ventilatie.
Gebruik het artikel alleen in gematigde klimatologische
omstandigheden.
Gebruik het product niet op plaatsen waar elektronische
producten niet zijn toegestaan.
Gebruik het product niet in een vochtige omgeving en
vermijd spatwater.
Sluit de accu van het geopende eindtoestel niet kort. Er
bestaat explosiegevaar!
Bescherm het product tegen vuil, vocht en oververhitting
en gebruik het alleen in droge omgevingen.
Laat het product niet vallen en stel het niet bloot aan
zware schokken of stoten.
Gebruik het product niet buiten de in de technische
gegevens vermelde vermogensgrenzen.
Trek, voor het loskoppelen van de kabel, direct aan de
stekker en nooit aan de kabel.
Leg alle kabels zodanig dat er geen struikelgevaar
ontstaat of vluchtwegen worden geblokkeerd!
Knik of klem de kabel niet.
Dit product dient, zoals alle elektrische producten, buiten
het bereik van kinderen te worden gehouden!
Verander niets aan het apparaat. Daardoor vervalt elke
aanspraak op garantie.
Het verpakkingsmateriaal mag absoluut niet in handen
van kinderen komen in verband met verstikkingsgevaar.
Voer het verpakkingsmateriaal direct en overeenkomstig
de lokaal geldende afvoervoorschriften af.
Gevaar voor een elektrische schok
Open het product niet en gebruik het niet meer bij
beschadigingen.
Gebruik het product niet indien de adapter, de
adapterkabel of de voedingskabel is beschadigd.
Probeer het product niet zelf te onderhouden
of te repareren. Laat onderhouds- en
reparatiewerkzaamheden door vakpersoneel uitvoeren.
4. Het product in gebruik nemen
Aanwijzing – voedingsspanning
100 – 240V
De voedingsadapter is geschikt voor een netspanning
van 100 – 240V en kan om die reden wereldwijd
worden gebruikt. Houd er rekening mee dat hiervoor een
landspecieke adapter is benodigd.
Verzeker u ervan dat uw notebook een voedingsspanning
van 5V / 9V / 12V / 15V / 20V (+/- 1 volt) vereist.
Deze informatie is te vinden op de originele netadapter
of in de gebruikersaanwijzing van uw apparaat.
Raadpleeg indien nodig de dealer van het apparaat of de
ondersteuning van de fabrikant van uw apparaat.
Waarschuwing
Gebruik de universele notebook-netadapter niet als
u niet zonder twijfel de voedingsspanning van uw
apparaat kunt vaststellen.
Controleer of het totale stroomverbruik van de
notebook het nominale uitgangsvermogen van de
netadapter van 92W niet overschrijdt.
Als u dit niet doet, kan dit leiden tot schade aan de
universele notebook-netadapter en het aangesloten
apparaat!
11
Neem de aanwijzingen in de gebruikersaanwijzing van
uw apparaat in acht. Als deze geen expliciete andere
instructies bevatten, gaat u als volgt te werk:
Aanwijzing – Power Delivery
Plug & Go: geen handmatige instellingen nodig,
aansluiten en beginnen:
Door Power Delivery/Thunderbolt™ 3/Quick Charge
worden spanning en vermogen automatisch ingesteld.
Houd er rekening dat voor eciënt en geoptimaliseerd
opladen de PD (Power Delivery)/TBT3 (Thunderbolt™
3)/QC (Quick Charge) functie door uw apparaat moet
worden ondersteund.
Vanwege het grote aantal PD/TBT3/QC-compatibele
apparaten met verschillende rmware-versies wordt de
functie mogelijk niet volledig ondersteund.
Waarschuwing
Sluit het product alleen aan op een daarvoor geschikt
en intact stopcontact. Het stopcontact moet in de
buurt van het product zijn aangebracht en goed
bereikbaar zijn.
Het product met behulp van de schakelaar in/uit van
het net scheiden - indien er geen schakelaar is, trekt u
de voedingskabel aan de stekker uit het stopcontact.
Let erop dat bij meervoudige stopcontacten de
aangesloten verbruikers niet het toegestane totale
opgenomen vermogen overschrijden.
Sluit het netsnoer op de netadapter en uw apparaat aan.
Steek vervolgens de stekker in een deugdelijk
geïnstalleerd stopcontact.
Het apparaat kan nu worden gebruikt en ingeschakeld/
opgeladen.
Aanwijzing
Koppel het product na gebruik los van het lichtnet.
5. Onderhoud en verzorging
Aanwijzing
Koppel het product los van het lichtnet voordat u het
reinigt.
Reinig dit product uitsluitend met een pluisvrije,
licht vochtige doek en gebruik geen agressieve
reinigingsmiddelen.
Let erop dat er geen water in het product terechtkomt.
6. Uitsluiting aansprakelijkheid
Hama GmbH & Co KG is niet aansprakelijk voor en
verleent geen garantie op schade die het gevolg is van
ondeskundige installatie, montage en ondeskundig
gebruik van het product of het niet in acht nemen van de
handleiding en/of veiligheidsinstructies.
7. Technische gegevens
Omgevingstemperatuur 0° – 35°C
Gegevens overeenkomstig verordening
(EU) 2019/1782
Naam of handelsmerk van
de fabrikant, handelsregister
nummer en adres
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Typeaanduiding 00200007
Voedingsspanning 100 – 240V
Voedingsfrequentie 50/60Hz
Uitgangsspanning/
Uitgangsstroom/
Uitgangsvermogen
5.0 V DC / 3.0 A / 15.0 W
9.0 V DC / 3.0 A / 27.0 W
12.0 V DC / 3.0 A / 36.0 W
15.0 V DC / 3.0 A / 45.0 W
20.0 V DC / 4.6 A / 92.0 W
Gemiddelde actieve
eciëntie 81.4 %
Eciëntie bij lage belasting
(10 %) 79.2 %
Energieverbruik in niet-
belaste toestand 0.10 W
12
IIstruzioni per l‘uso
1. Spiegazione dei simboli di avvertenza e delle
istruzioni
Pericolo di scarica elettrica
Questo simbolo indica la presenza di pericoli dovuti al
contatto con parti del prodotto sotto tensione, di entità
tale da comportare il rischio di scarica elettrica.
Attenzione
Contraddistingue le istruzioni di sicurezza o richiama
l’attenzione su particolari rischi e pericoli.
Nota
Contraddistingue informazioni supplementari o
indicazioni importanti.
2. Contenuto della confezione
Alimentatore per notebook USB-C universale
Cavo di alimentazione
Il presente libretto di istruzioni
3. Istruzioni di sicurezza
Utilizzare il prodotto soltanto per gli scopi previsti.
Non collocare il prodotto nelle immediate vicinanze del
riscaldamento, di fonti di calore o alla luce diretta del
sole.
Assicurare una suciente ventilazione e dissipazione del
calore.
Utilizzare il prodotto soltanto in condizioni climatiche
moderate.
Non utilizzare il prodotto in ambienti dove non è
consentito l’uso di strumenti elettronici.
Non utilizzare il prodotto in ambienti umidi e proteggerlo
dagli spruzzi d’acqua.
Non mettere in corto circuito la batteria del dispositivo
aperto. Pericolo di esplosione!
Proteggere il prodotto dallo sporco, dall’umidità e
dal surriscaldamento e utilizzarlo soltanto in ambienti
asciutti.
Non far cadere il prodotto e non esporlo a urti.
Non utilizzare il prodotto oltre i limiti di potenza indicati
nei dati tecnici.
Disconnettere il prodotto dalla presa elettrica estraendo
direttamente la spina e in nessun caso tirando il cavo.
Disporre il cavo in modo che non comporti pericoli di
inciampo od ostruzioni delle vie di fuga!
Non piegare, né schiacciare il cavo.
Come tutte le apparecchiature elettriche, tenere il
prodotto fuori dalla portata dei bambini!
Non apportare modiche all’apparecchio. In tal caso
decade ogni diritto di garanzia.
Tenere l’imballaggio assolutamente fuori dalla portata
dei bambini: pericolo di soffocamento.
Smaltire immediatamente il materiale d’imballaggio in
conformità alle prescrizioni locali vigenti.
Pericolo di scarica elettrica
Non aprire il prodotto e cessarne l’utilizzo se presenta
danneggiamenti.
Non utilizzare il prodotto qualora l’adattatore AC,
il cavo adattatore o quello di alimentazione siano
danneggiati.
Non effettuare interventi di manutenzione e
riparazione sul prodotto di propria iniziativa. Fare
eseguire i lavori di riparazione soltanto da operatori
specializzati.
4. Messa in funzione e utilizzo
Nota – tensione elettrica da 100 – 240V
L’alimentatore supporta tensioni elettriche da
100 – 240V per cui può essere utilizzato in ogni paese
del mondo. Tuttavia potrebbe essere necessario un
adattatore specico per il paese in cui si utilizza.
Assicurarsi che il notebook richieda una tensione elettrica
di 5V / 9V / 12V / 15V / 20V (+/- 1 Volt).
Questa informazione è riportata sull’alimentatore
originale o nelle istruzioni d’uso del dispositivo. Se
necessario, rivolgersi al rivenditore o al servizio di
assistenza del costruttore del dispositivo.
Attenzione
Non utilizzare l’alimentatore per notebook universale,
qualora non sia possibile determinare esattamente la
tensione elettrica richiesta dal dispositivo.
Assicurarsi che l’assorbimento di potenza totale del
notebook non superi la potenza di uscita nominale
dell’alimentatore pari a 92W.
In caso di mancata osservanza di tale istruzioni
non possono essere esclusi danneggiamenti
all’alimentatore del notebook universale e del
dispositivo connesso!
13
Osservare le informazioni riportate nelle istruzioni d’uso
del dispositivo. Qualora in esse non siano espressamente
specicate istruzioni diverse, procedere nel seguente modo:
Nota – Power Delivery
Plug & Go: non occorrono impostazioni manuali, basta
collegare e iniziare:
la tensione e la potenza vengono automaticamente
impostate tramite Power Delivery/Thunderbolt™ 3/
Quick Charge.
Si osservi che per assicurare una carica eciente e
ottimizzata, il dispositivo deve supportare la funzione
PD (Power Delivery)/TBT3 (Thunderbolt™ 3)/QC (Quick
Charge).
Nella gran parte dei dispositivi compatibili PD/TBT3/
QC dotati di versioni rmware diverse, la funzione
potrebbe non essere interamente supportata.
Attenzione
Utilizzare il prodotto collegandolo a una presa elettrica
conforme. La presa elettrica deve trovarsi nelle
vicinanze del prodotto ed essere facilmente accessibile.
Scollegare il prodotto dalla rete elettrica tramite
il pulsante di accensione/spegnimento. Se non è
disponibile, disconnettere il cavo di alimentazione
dalla presa elettrica.
Se si utilizzano prese multiple, prestare attenzione che
le utenze collegate non superino l’assorbimento di
potenza totale consentito.
Collegare il cavo di alimentazione all’alimentatore e al
dispositivo.
Collegare inne la spina a una presa elettrica installata
a norma.
Il dispositivo può essere quindi utilizzato/ricaricato.
Nota
Dopo l’uso disconnettere il prodotto dalla rete elettrica.
5. Cura e manutenzione
Nota
Prima della pulizia disconnettere il prodotto dalla rete
elettrica.
Pulire il presente prodotto servendosi di un panno anti-
pelucchi leggermente umido, senza utilizzare detergenti
aggressivi.
Fare attenzione che nel prodotto non penetri acqua.
6. Esclusione di garanzia
Hama GmbH & Co KG declina ogni responsabilità per
danni dovuti al montaggio o all’utilizzo scorretto del
prodotto, nonché alla mancata osservanza delle istruzioni
d’uso e/o di sicurezza.
7. Dati tecnici
Temperatura ambiente 0° – 35°C
Indicazioni secondo il regolamento (UE)
2019/1782
Nome o marchio del fabbri
cante, numero di iscrizione
nel registro delle imprese e
indi rizzo del fabbricante
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Identicativo del modello 00200007
Tensione di ingresso 100 – 240V
Frequenza di ingresso CA 50 / 60 Hz
Tensione di uscita /
Corrente di uscita/
Potenza di uscita
5.0 V DC / 3.0 A / 15.0 W
9.0 V DC / 3.0 A / 27.0 W
12.0 V DC / 3.0 A / 36.0 W
15.0 V DC / 3.0 A / 45.0 W
20.0 V DC / 4.6 A / 92.0 W
Rendimento medio in modo
attivo 81.4 %
Rendimento a basso carico
(10 %) 79.2 %
Potenza assorbita nella condi
zione a vuoto 0.10 W
14
PInstrukcja obsługi
1. Objaśnienia dotyczące użytych symboli i uwag
Ryzyko porażenia prądem
Niniejszy symbol wskazuje na części produktu znajdujące
siępod napięciem na tyle wysokim, że istnieje zagrożenie
porażenia prądem.
Ostrzeżenie
Niniejszy symbol stosuje siędo wskazania zaleceń
dotyczących bezpieczeństwa lub w celu zwrócenia uwagi
na konkretne zagrożenia i niebezpieczeństwa.
Wskazówka
Niniejszy symbol wskazuje na dodatkowe informacje i
istotne uwagi.
2. Zawartość zestawu
Uniwersalny zasilacz sieciowy USB-C do notebooka
Kabel sieciowy
Niniejsza instrukcja obsługi
3. Uwagi dotyczące bezpieczeństwa
Produkt należy używaćwyłącznie zgodnie z
przeznaczeniem.
Nie używaćproduktu w bezpośrednim sąsiedztwie
grzejnika, innych źródełciepła lub w bezpośrednim
świetle słonecznym.
Upewnićsię,że istnieje wystarczające odprowadzanie
ciepła i wentylacja.
Z produktu należy korzystaćwyłącznie w umiarkowanych
warunkach klimatycznych.
Nie używaćproduktu w miejscach, gdzie niedozwolone
jest stosowanie urządzeńelektronicznych.
Nie używaćproduktu w wilgotnym otoczeniu i chronićgo
przed bryzgami wody.
Nie zwieraćakumulatora otwartego urządzenia
końcowego. Niebezpieczeństwo wybuchu!
Chronićprodukt przed zanieczyszczeniami, wilgociąi
przegrzaniem. Korzystaćz produktu wyłącznie w suchych
pomieszczeniach.
Nie upuszczaćproduktu i nie narażaćgo na silne
wstrząsy.
Nie używaćproduktu poza granicami jego wydajności
określonymi w danych technicznych.
Wyciągając kabel, chwytaćbezpośrednio za wtyczkę,
nigdy za kabel.
Wszystkie kable poprowadzićtak, aby nie stanowiły
one ryzyka potknięcia sięani nie zagradzały dróg
ewakuacyjnych!
Nie zginaći nie zgniataćkabla.
Ten produkt, podobnie jak wszystkie produkty
elektryczne, nie jest przeznaczony do obsługi przez dzieci!
Nie dokonywać żadnych zmian w urządzeniu. Spowoduje
to utratęgwarancji.
Opakowanie przechowywaćw miejscu niedostępnym dla
dzieci. Niebezpieczeństwo uduszenia.
Opakowanie należy niezwłocznie usunąć zgodnie z
lokalnymi przepisami dotyczącymi utylizacji.
Ryzyko porażenia prądem
Nie otwieraćproduktu i nie kontynuowaćjego obsługi,
jeżeli jest uszkodzony.
Nie używaćproduktu, jeżeli zasilacz AC, przewód
zasilacza lub przewód zasilania sieciowego są
uszkodzone.
Nie próbowaćsamodzielnie dokonywaćkonserwacji
lub naprawiaćurządzenia. Wszelkie prace
konserwacyjne należy powierzyćodpowiedniemu
personelowi specjalistycznemu.
4. Uruchomienie i eksploatacja
Uwaga – napięcie sieciowe 100 – 240V
Zasilacz sieciowy jest przystosowany do napięcia sieci
100 – 240V, co umożliwia jego stosowanie na całym
świecie. Należy pamiętać,że konieczny jest wtedy
odpowiedni adapter krajowy.
Upewnićsię,że notebook wymaga napięcia zasilającego
wynoszącego 5V / 9V / 12V / 15V / 20V (+/- 1 V).
Informacje te można znaleźć na oryginalnym zasilaczu
lub w instrukcji obsługi urządzenia końcowego. Jeżeli to
konieczne, zasięgnąć informacji u sprzedawcy urządzenia
końcowego lub w dziale pomocy technicznej.
Ostrzeżenie
Nie używaćuniwersalnego zasilacza do notebooka,
jeżeli nie można ponad wszelkąwątpliwość określić
napięcia zasilającego urządzenia końcowego.
Upewnićsię,że całkowity pobór mocy notebooka nie
przekracza znamionowej mocy wyjściowej zasilacza
wynoszącej 92W.
Nieprzestrzeganie tego wymogu może spowodować
uszkodzenie uniwersalnego zasilacza do notebooka i
podłączonego urządzenia końcowego!
15
Przestrzegaćinstrukcji zawartych w instrukcji obsługi
urządzenia końcowego. Jeżeli nie zawierająone wyraźnie
innych instrukcji, wykonaćnastępujące czynności:
Wskazówka – Power Delivery
Plug & Go: Nie sąwymagane ustawienia ręczne,
wystarczy podłączyći uruchomić:
Dzięki funkcji Power Delivery/Thunderbolt™ 3/Quick
Charge napięcie i moc sąustawiane automatycznie.
Należy pamiętać,że w celu wydajnego i
zoptymalizowanego ładowania funkcja PD (Power
Delivery)/TBT3 (Thunderbolt™ 3)/QC (Quick Charge)
musi byćobsługiwana przez urządzenie końcowe.
W przypadku dużej liczby urządzeńkońcowych
obsługujących funkcjęPD/TBT3/QC z różnymi wersjami
oprogramowania sprzętowego funkcja może nie byćw
pełni obsługiwana.
Ostrzeżenie
Podłączaćprodukt tylko do odpowiedniego gniazda
wtykowego. Gniazdo wtykowe musi znajdowaćsięw
pobliżu produktu i być łatwo dostępne.
Odłączaćprodukt od sieci za pomocąwyłącznika
zasilania – jeżeli nie jest on na wyposażeniu,
wyciągnąć przewód sieciowy z gniazda wtykowego.
W przypadku wielu gniazd upewnićsię,że podłączone
odbiorniki nie przekraczajądopuszczalnego
całkowitego zużycia energii.
Podłączyćkabel sieciowy do zasilacza i urządzenia
końcowego.
Wreszcie podłączyćwtyczkęsieciowądo prawidłowo
zainstalowanego gniazda elektrycznego.
Urządzenie końcowe może byćteraz używane oraz
włączane/ładowane.
Wskazówka
Po zakończeniu korzystania z urządzenia należy je
odłączyćod sieci elektrycznej.
5. Obsługa i konserwacja
Wskazówka
Przed przystąpieniem do czyszczenia należy odłączyć
produkt od sieci elektrycznej.
Czyścićprodukt wyłącznie niestrzępiącąsię, lekko
wilgotną ściereczką. Nie używaćagresywnych środków
czyszczących.
Upewnićsię,że do produktu nie dostanie sięwoda.
6. Wyłączenie odpowiedzialności z tytułu gwarancji
Hama GmbH & Co KG nie ponosi odpowiedzialności i
nie udziela żadnej gwarancji z tytułu szkód wynikających
z niewłaściwego montażu, instalacji, niewłaściwego
użytkowania urządzenia ani z tytułu szkód wynikających
z postępowania niezgodnie z instrukcjąobsługi i
wskazówkami bezpieczeństwa.
7. Dane techniczne
Temperatura otoczenia 0° – 35°C
Dane zgodnie z rozporządzeniem (UE)
2019/1782
Nazwa lub znak towarowy
producenta, numer rejestru
handlowego i adres
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Identykator modelu 00200007
Napięcie wejściowe 100 – 240V
Wejściowa częstotliwość prą
du przemiennego 50/60Hz
Napięcie wyjściowe/
Prąd wyjściowy/
Moc wyjściowa
5.0 V DC / 3.0 A / 15.0 W
9.0 V DC / 3.0 A / 27.0 W
12.0 V DC / 3.0 A / 36.0 W
15.0 V DC / 3.0 A / 45.0 W
20.0 V DC / 4.6 A / 92.0 W
Średnia sprawność podczas
pracy 81.4 %
Sprawność przy niskim obcią
żeniu (10 %) 79.2 %
Zużycie energii w stanie bez
obciążenia 0.10 W
16
HHasználati útmutató
1. Figyelmeztetőjelzések és megjegyzések
magyarázata
Áramütés veszélye
Ez a jelzés a termék azon nem szigetelt részeinek
megérintésére vonatkozó veszélyre utal, amelyek olyan
magas, veszélyes feszültség alatt állhatnak, amely miatt
áramütés veszélye áll fenn.
Figyelmeztetés
A biztonsági utasítások jelölésére használjuk, illetve
hogy felhívjuk a gyelmet a különleges veszélyekre és
kockázatokra.
Megjegyzés
Akkor használjuk, ha kiegészítőinformációkat közlünk,
vagy fontos tudnivalókra hívjuk fel a gyelmet.
2. A csomag tartalma
Univerzális USB-C laptop-tápegység
Hálózati kábel
Ez a kezelési útmutató
3. Biztonsági utasítások
A terméket kizárólag a rendeltetési céljára használja.
Ne üzemeltesse a terméket közvetlenül fűtés, más
hőforrás közelében vagy közvetlen napsugárzásnál.
Gondoskodjon a megfelelőhőelvezetésről és a
szellőzésről.
A terméket csak mérsékelt időjárási körülmények között
használja.
Ne használja a terméket olyan helyen, ahol elektronikus
készülékek használata nem megengedett.
Ne használja a terméket párás környezetben, és kerülje
az érintkezést fröccsenővízzel.
Ne zárja rövidre a felnyitott készülék akkumulátorát.
Robbanásveszély!
Óvja meg a terméket szennyeződéstől, nedvességtől
és túlmelegedéstől, és kizárólag száraz környezetben
használja.
Ne ejtse le a terméket és ne tegye ki heves rázkódásnak.
Ne üzemeltesse a terméket a műszaki adatokban
megadott teljesítményhatárokon túl.
A kábel eltávolításához mindig közvetlenül a dugós
csatlakozót húzza, és sohasem a kábelt.
Úgy fektesse az összes kábelt, hogy ne alakuljon ki
botlásveszély és a menekülési útvonalak ne legyenek
eltorlaszolva!
Ne hajlítsa vagy törje meg a kábelt.
Ez a termék, mint minden elektromos készülék, nem
gyermekek kezébe való!
Ne végezzen semmilyen módosítást a készüléken. Ebben
az esetben minden garanciaigény megszűnik.
Feltétlenül tartsa távol a gyermekeket a
csomagolóanyagtól, mert fulladásveszély áll fenn.
Azonnal selejtezze ki a csomagolóanyagot a helyileg
érvényes hulladékkezelési előírások szerint.
Áramütés veszélye
Ne nyissa ki a terméket, és sérülés esetén ne
üzemeltesse tovább.
Ne használja a terméket, ha az AC-adapter, a
csatlakozókábel vagy a hálózati vezeték megsérült.
Ne kísérelje meg a készüléket saját kezűleg
karbantartani vagy megjavítani. Minden karbantartási
munkát bízzon illetékes szakemberre.
4. Üzembe helyezés és használat
Megjegyzés – 100 – 240V-os hálózati
feszültség
A tápegység 100 – 240V-os hálózati feszültséggel
működik, így szinte a világ minden pontján használható.
Vegye gyelembe, hogy ehhez országspecikus adapterre
lehet szükség.
Ellenőrizze, hogy laptopja 5V / 9V / 12V / 15V / 20V
(+/- 1 Volt) betápfeszültséget igényeljen.
Ezt az adatot a termék használati útmutatójában
vagy az eredeti alkatrészen találhatja. Szükség esetén
érdeklődjön a termék forgalmazójánál vagy a termék
ügyfélszolgálatán.
Figyelmeztetés
Ne használja az univerzális laptop-tápegységet,
ha terméke betápfeszültségét nem tudja biztosan
megállapítani.
Győződjön meg arról, hogy laptopja tápegységének
névleges kimenőteljesítménye ne haladja meg a 92W
értéket.
Az utasítások ignorálása az univerzális laptop-
tápegység és a csatlakoztatott termék sérülését,
károsodását okozhatja!
17
Kérjük, vegye gyelembe, kövesse a termék használati
útmutatójában megadott utasításokat. Ha az nem
tartalmaz ezzel ellentétes utasítást, akkor tegye a
következőt:
Megjegyzés – áramellátás
Plug & Go: Nem szükséges manuális beállítás; csak
csatlakoztassa és kész:
A Power Delivery/Thunderbolt™ 3/Quick Charge a
feszültséget és a teljesítményt automatikusan beállítja.
A hatékony és optimális töltéshez termékének
támogatnia kell a PD (Power Delivery)/
TBT3 (Thunderbolt™ 3)/QC (Quick Charge) funkciót.
A PD/TBT3/QC-képes termékek jelentős száma miatt
elképzelhető, hogy az adott termék a funkciót nem
teljesen támogatja.
Figyelmeztetés
A terméket csak erre engedélyezett csatlakozóaljzatról
működtesse. A termék közelében, könnyen
hozzáférhetőhelyen levőcsatlakozóaljzatot kell
használni.
A főkapcsolóval válassza le a terméket a hálózatról
– ha nincs rajta főkapcsoló, akkor húzza ki a hálózati
kábelt a csatlakozóaljzatból.
Elosztó használata esetén ügyeljen rá, hogy a
csatlakoztatott fogyasztók ne lépjék túl a megengedett
összesített teljesítményfelvételt.
Csatlakoztassa a tápkábelt a tápegységhez és a
termékéhez is.
Végül csatlakossa a csatlakozódugót egy szabályosan
telepített konnektorhoz.
A termékét mostantól használhatja és vagy
bekapcsolhatja/töltheti.
Megjegyzés
A terméket a használat után válassza le az elektromos
hálózatról.
5. Karbantartás és ápolás
Megjegyzés
A terméket a tisztítás előtt válassza le az elektromos
hálózatról.
Ezt a terméket csak szöszmentes, kissé benedvesített
kendővel tisztítsa, és ne használjon agresszív tisztítószert.
Ügyeljen arra, hogy ne juthasson be víz a termékbe.
6. Szavatosság kizárása
A Hama GmbH & Co KG semmilyen felelősséget vagy
szavatosságot nem vállal a termék szakszerűtlen
telepítéséből, szereléséből és szakszerűtlen használatából,
vagy a kezelési útmutató és/vagy a biztonsági előírások be
nem tartásából eredőkárokért.
7. Műszaki adatok
Környezeti hőmérséklet 0° – 35°C
Adatok az (EU) 2019/1782 rendelet szerint
A gyártó neve vagy védjegye,
cégjegyzékszáma és címe
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Modellazonosító 00200007
Bemenőfeszültség 100 – 240V
Bemenőváltóáram frekvenci
ája 50/60Hz
Kimenőfeszültség/
Kimenőáramerősség/
Kimenőteljesítmény
5.0 V DC / 3.0 A / 15.0 W
9.0 V DC / 3.0 A / 27.0 W
12.0 V DC / 3.0 A / 36.0 W
15.0 V DC / 3.0 A / 45.0 W
20.0 V DC / 4.6 A / 92.0 W
Aktív üzemmódban mért át
lagos hatásfok 81.4 %
Hatásfok alacsony (10 %-os)
terhelésnél 79.2 %
Üresjárási üzemmódban mért
energiafogyasztás 0.10 W
18
MManual de utilizare
1. Explicarea simbolurilor de avertizare și a
indicațiilor
Pericol de electrocutare
Acest simbol atrage atenția asupra pericolului de
atingere a componentelor neizolate ale produsului,
care se pot aa sub o tensiune periculoasă, care poate
reprezenta un pericol de electrocutare.
Avertizare
Este utilizat pentru a marca indicațiile de securitate sau
pentru a atrage atenția asupra pericolelor și riscurilor
speciale.
Indicație
Este utilizat pentru a marca suplimentar informații sau
indicații importante.
2. Conținutul ambalajului
Alimentator universal de rețea USB-C pentru notebook
Cablu de rețea
Aceste instrucțiuni de utilizare
3. Indicații de securitate
Utilizați produsul numai pentru scopul prevăzut pentru
acesta.
Nu operați produsul în imediata apropiere a sistemului
de încălzire, de alte surse de căldurăsau în razele directe
ale soarelui.
Asigurați-văcăexistăsuciente posibilități de
îndepărtare a căldurii și ventilație.
Utilizați articolul numai în condiții climaterice moderate.
Nu folosiți produsul în zone unde nu sunt admise aparate
electronice.
Nu folosiți produsul în mediu umed și evitați stropirea
cu apă.
Nu scurtcircuitați acumulatorul aparatului terminal
deschis. Existăpericol de explozie!
Protejați produsul de murdărie, umiditate și
supraîncălzire și utilizați-l numai în medii uscate.
Nu lăsați produsul săcadă și nici nu îl expuneți unor
vibrații puternice.
Operați produsul numai în limita capacităților sale
indicate în cadrul datelor tehnice.
Pentru scoaterea din prizătrageți de ștecărși niciodată
de cablu.
Pozați cablurile astfel încât sănu văîmpiedicați de ele și
sănu blocheze ieșirile de urgență!
Nu îndoițiși nu striviți cablul.
Acest produs, ca toate produsele electrice, nu are ce
căuta pe mâinile copiilor!
Nu efectuați modicări ale aparatului. În acest fel
pierdeţi orice drept la garanţie.
Țineți copiii neapărat departe de ambalaje, deoarece
existăpericol de sufocare.
Eliminați ambalajele imediat, conform prescripțiilor locale
valabile de eliminare a deșeurilor.
Pericol de electrocutare
Nu deschideți produsul și nu continuați săîl operați,
dacăprezintădeteriorări.
Nu utilizați produsul, dacăadaptorul CA, cablul
adaptorului sau cablul de alimentare sunt deteriorate.
Nu încercați săreparați sau săîntrețineți produsul în
regie proprie. Operațiile de reparații se executănumai
de personal de specialitate.
4. Punerea în funcțiune și operarea
Indicație – Tensiunea de rețea 100 – 240V
Alimentatorul de rețea este adecvat pentru o tensiune
de alimentare situatăîntre 100 – 240V, putând astfel
utilizat oriunde în lume. Aveți în vedere în acest sens, că
poate necesar un adaptor specicțării.
Asigurați-văcănotebook-ul dvs. are nevoie de o tensiune
de alimentare de 5V / 9V / 12V / 15V / 20V (+/- 1 volți).
Aceastăinformație poate găsităpe alimentatorul
dvs. de rețea original sau în manualul de utilizare
al terminalului dvs. Dacăeste cazul, întrebați
comerciantul terminalului dvs. sau la linia de asistență a
producătorului terminalului dvs.
Avertizare
Nu utilizați alimentatorul universal de notebook, dacă
tensiunea de alimentare a terminalului dvs. nu poate
determinatădincolo de orice dubiu.
Asigurați-văde faptul cănotebook-ul dvs. nu
depășește capacitatea electricănominalăde ieșire a
alimentatorului de 92W.
În caz de nerespectare poate interveni o deteriorare a
alimentatorului universal de notebook-uri, precum și a
terminalului conectat la acesta!
19
Acordați atenție indicațiilor din cadrul instrucțiunilor de
utilizare ale terminalului dvs. În cazul în care acestea nu
includ indicații explicite, procedați dupăcum urmează:
Indicație – Power Delivery
Plug & Go: Nu sunt necesare setări manuale, efectuați
conexiunea și porniți:
Prin intermediul Power Delivery/Thunderbolt™ 3/Quick
Charge sunt setate automat tensiunea și puterea.
Aveți în vedere căpentru încărcarea ecientă și
optimizată, este necesar ca funcția PD (Power
Delivery)/TBT3 (Thunderbolt™ 3)/QC (Quick Charge) a
terminalului dvs. să e susținută.
Datorităvolumului mare de terminale cu funcții PD/
TBT3/QC de versiuni diferite, este posibil ca funcția
aceasta sănu e complet susținută.
Avertizare
Operați produsul numai conectat la o prizăvalidată
pentru acesta. Priza trebuie săse ae în apropierea
produsului și să e ușor accesibilă.
Deconectați produsul prin intermediul butonului de
conectare/deconectare de la rețea – dacăacesta
lipsește, deconectați cablul de alimentare de la priză.
În cazul prizelor multiple, trebuie săaveți în vedere
ca puterea totalăa prizei sănu e depășităde
consumatorii conectați.
Conectați cablul de alimentare cu alimentatorul și cu
terminalul dvs.
Conectați în încheiere ștecărul de rețea la o priză
instalatăîn mod adecvat.
Terminalul poate acum utilizat și conectat/încărcat.
Indicație
Deconectați produsul de la rețea, dupăce nu îl mai
utilizați.
5. Întreținerea și îngrijirea
Indicație
Deconectați produsul de la alimentarea electricăînainte
de a-l curăța.
Curățați produsul numai cu o lavetăce nu lasăscame,
ușor umezită și nu utilizați detergenți agresivi.
Aveți grijăca apa sănu pătrundăîn produs.
6. Excluderea răspunderii
Hama GmbH & Co KG nu își asumănicio răspundere
sau garanție pentru daunele, ce rezultădin instalarea,
montajul, utilizarea inadecvatăa produsului sau
nerespectarea instrucțiunilor de utilizare și/sau a indicațiilor
de securitate.
7. Date tehnice
Temperatura ambiantă0° – 35°C
Informații conform regulamentului (UE)
2019/1782
Denumirea producătorului
sau marca comercială,
numărul de înregistrare
la Registrul Co merțului și
adresa
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Identicator de model 00200007
Tensiune de intrare 100 – 240V
Frecvența c.a. de intrare 50/60Hz
Tensiune de ieșire/
Curent de ieșire/
Putere de ieșire
5.0 V DC / 3.0 A / 15.0 W
9.0 V DC / 3.0 A / 27.0 W
12.0 V DC / 3.0 A / 36.0 W
15.0 V DC / 3.0 A / 45.0 W
20.0 V DC / 4.6 A / 92.0 W
Randament mediu în mod
activ 81.4 %
Randamentul la sarcină
redusă(10 %) 79.2 %
Puterea absorbităîn regim
fărăsarcină0.10 W
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39

Hama 00200007 Manual de utilizare

Tip
Manual de utilizare