dji TX32021028 Manualul utilizatorului

Tip
Manualul utilizatorului
DJI Video Transmitter
User Guide
Introduction
DJITM Video Transmitter features DJI O3 Pro technology that provides video transmission with
a maximum transmission range of 6 km, bit rate of up to 50 Mbps, and minimum end-to-end
latency within 100 ms. DJI Video Transmitter works at 2.4 GHz, 5.8 GHz and DFS, and is
capable of selecting the best transmission channel automatically. It supports AES 256-bit
encryption algorithm, and can output 1080p/60fps full HD images to multiple high-bright
remote monitors at the same time.
DJI Video Transmitter provides various power supply ports, which support DJI WB37 batteries ,
and can take power from Ronin devices through the DC-IN port. It provides various video
input and output ports such as HDMI-IN and SDI-IN, to fit most of the cameras on the market.
It also supports SDI loop-out function, which can be used with an external monitor.
DJI Video Transmitter is also equipped with a 1-inch OLED color screen, which can be set
through interactive buttons; built-in fan and precision metal design of the shell allows the
transmitter to be used normally in various harsh scenes, meeting the shooting needs of
various requirements such as radio and television, film, commercials, documentaries and so
on.
1. Antennas
Transmit the wireless signal.
2. Video Status LED
Indicates whether there is a video source signal input.
3. Linking Status LED
Indicates the linking status of the transmitter and receiving unit.
4. SDI Input Port
Video source sends signal to the transmitter unit.
5. SDI Output Port
The transmitter loops out the video source signal.
6. HDMI Port (Type A)
Used to receive the video source input signal.
7. Power/Communication Port (USB-C)
Used for activation, firmware update, and power supply and communication with
specific equipment.
8. DC IN Power Input Port
Supply power to the video transmitter by the provided power cable.
9. M4 Port
Used to install back plate for battery and various adapters for expansion.
10. External Power Supply Port
Supply power to other external devices.
11. Power Button
Press once to power on. Press and hold to power off.
12. Display Screen
Display the device menu.
13. Menu Dial
You can select and confirm on the screen menu by turning or pressing the dial.
14. Back Button
Press to return to the previous menu.
15. 3/8''-16 Screw Hole
16. 1/4''-20 Screw Hole
17. External Power Input Port
Install batteries by different back plate of battery, to supply power to the video
transmitter.
Installation and Connection
Installing Antennas
Install the four antennas on the video transmitter.
Installing WB37 Battery
1. Install the back plate which is compatible WB37 battery to the back of the video
transmitter and tighten two M4×12 screws.
2. Put the WB37 battery into the battery slot, press down the battery and push it to the
bottom until the RELEASE button pops up. A clicking sound indicates the battery is
properly secured.
Press and hold the RELEASE button, and push the battery in the opposite direction of
installation to remove the battery.
Installing Adapter
When used with DJI RS 2 gimbal or other equipment that is compatible with cold shoe
interface, an adapter is required to be installed.
1. Install the adapter to the front of the video transmitter and tighten two M4×12 screws.
2. Move the lever counterclockwise to lower the positioning block on the adapter.
3. Install the video transmitter to the DJI RS 2 gimbal through the cold shoe of the adapter.
4. Rotate the lever in the locking direction to finish installation.
Connection
USB-C to Lemo Cable
Connect the focus motor port (USB-C) of the DJI RS 2 to the DC IN port of the video
transmitter, the DJI RS 2 can supply power to the video transmitter.
P-Tap to Lemo Cable
Connect the 14.4V P-Tap port of Ronin 2 to the DC IN port of the video transmitter, the Ronin
2 can supply power to the video transmitter.
Lemo to Lemo Cable
Connect the 14.4V accessory power port of Ronin 2 to the DC IN port of the video transmitter,
the Ronin 2 can supply power to the video transmitter and communicate with it.
USB-C Cable
Connect the USB-C port of the video transmitter to a computer, which can be used for
activation, firmware update and other functions.
SDI Cable
Used to transmit SDI signal.
Activation
When powered on, connect the video transmitter to a computer and run DJI Assistant 2 (Ronin
Series) for activation.
Download DJI Assistant 2 (Ronin Series) at https://www.dji.com/xxx/downloads
Linking
To start linking, press and hold the menu dial on the video transmitter. The Linking Status LED
blinks red.
When the linking is complete, the linking status LED turns solid green and the video
transmitter can communicate with the high-bright remote monitor.
Video Status LED Description
Solid Green
Video input available
Solid Red
No video input
Linking Status LED
Description
Solid Red Device powered on, but not linked
Blinks Red Linking
Solid Green Linking successful. Wireless video transmission normal
Firmware Update
Use DJI Assistant 2 (Ronin Series) to update the firmware of the video transmitter.
1. Power on the device and connect to the USB 3.0 port of a computer using a USB-C cable.
2. Launch DJI Assistant 2 (Ronin Series) and log in with a DJI account.
3. Select the device and click Firmware Update on the left side of the screen.
4. Select the firmware version.
5. The firmware will be downloaded and updated automatically.
6. The device will restart automatically after the firmware update is complete.
Specifications
Weight
Approx. 350 g
Dimensions (antennas
excluded) 126.75×97.30×26 mm
Operating Frequency
2.400-2.4835 GHz
5.150-5.250 GHz
5.250-5.350 GHz
5.470-5.725 GHz
5.725-5.850 GHz
Transmitter Power (EIRP)
2.4GHz: <33 dBm (FCC), <20 dBm (SRRC/CE/MIC)
5.8GHz: <33 dBm (FCC/SRRC), <14 dBm (CE)
5.1GHz: <23 dBm (FCC/SRRC/CE/MIC)
5.2GHz: <30 dBm (FCC), <23 dBm (SRRC/CE/MIC)
5.5GHz: <30 dBm (FCC), <23 dBm (CE/MIC)
Power 11 W
Input Voltage External Power Input Port: 6-18 V
DC-IN Power Input Port: 6-18 V
Output Voltage External Power Supply Port: 6-18 V
Input Audio Format
SDI embedded, HDMI embedded
Max Bitrate 50Mbps
Operating Temperature -10° to 45° C (14° to 113° F)
FCC Compliance Notice
Supplier’s Declaration of Conformity
Product name: DJI Video Transmitter
Model Number:
TX3
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above mentioned
model was tested to demonstrate complying with all applicable FCC rules and regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End user must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves
established by the Federal Communications Commission (USA). These requirements set a SAR
limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under
this standard during product certification for use when properly worn on the body.
ISED Compliance Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions: (1)This device may not cause interference.(2)This device must
accept any interference, including interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :(1)L’appareil ne doit pas produire de brouillage; (2)L’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled
environment. End user must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.The portable device is designed to meet the
requirements for exposure to radio waves established by the CNR-102.
Cet équipement est conforme aux limites d’exposition aux rayonnements RSS-102 établies
pour un environnement non contrôlé. L’utilisateur final doit suivre les instructions spécifiques
pour satisfaire les normes. Cet émetteur ne doit pas être co-implanté ou fonctionner en
conjonction avec toute autre antenne ou transmetteur. Le dispositif portatif est conçu pour
répondre aux exigences d’exposition aux ondes radio établie par le développement
énergétique DURABLE.
These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest
SAR value reported under this standard during product certification for use when properly
worn on the body.
Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur
SAR la plus élevée signalée en vertu de cette norme lors de la certification de produit à utiliser
lorsqu’il est correctement porté sur le corps.
No operation is permitted for the frequency “5600-5650MHz”
Aucune opération n’est autorisée pour la fréquence « 5600-5650MHz »
For devices with detachable antenna(s), the maximum antenna gain permitted for devices in
the bands 5470-5725 MHz, 5725-5850 MHz shall be such that the equipment still
complies with the e.i.r.p. limit as appropriate.
Le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 470-5 725 MHz,
5725-5825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point
à point et non point à point, selon le cas
5150-5250MHz operating radio-frequency band is not supported for market in Canada.
部件名称
有害物质
(Pb)
(Hg)
(Cd)
六价铬
(Cr+6)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
线路板 ×
外壳 ×
液晶屏 ×
金属部件
(铜合金) ×
内部线材 ×
其他配件 ×
本表格依据SJ/T 11364 的规定编制。
○:表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572 规定的限量要求以下。
×表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572
规定的限量要求。
(产品符合欧盟ROHS指令环保要求)
KCC Compliance Notice
해당무선설비는 운용 전파혼신 가능성이 으므로 인명안전과 관련된 서비스는
없습니다.”
해당 무선설비는 운용 전파혼신 가능성이 있음
NCC Compliance Notice
取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、
大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通
信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前述合法通信,
指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
應避免影響附近雷達系統之操作。
高增益指向性天線只得應用於固定式點對點系統。
EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this
device (DJI Video Transmitter) is in compliance with the essential requirements and other
relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-
compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
GB Compliance Statement: SZ DJI OSMO TECHNOLOGY CO., LTD. hereby declares that this
device (DJI Video Transmitter) is in compliance with the essential requirements and other
relevant provisions of Radio Equipment Regulations 2017.
A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-
compliance
Declaración de cumplimiento UE: SZ DJI OSMO TECHNOLOGY CO., LTD. por la presente
declara que este dispositivo (DJI Video Transmitter) cumple los requisitos básicos y el resto
de provisiones relevantes de la Directiva 2014/53/EU.
Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/euro-
compliance
Dirección de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
EU-verklaring van overeenstemming: SZ DJI OSMO TECHNOLOGY CO., LTD. verklaart
hierbij dat dit apparaat (DJI Video Transmitter) voldoet aan de essentiële vereisten en andere
relevante bepalingen van Richtlijn 2014/53/EU.
De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-
compliance
Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Declaração de conformidade da UE: A SZ DJI OSMO TECHNOLOGY CO., LTD. declara,
através deste documento, que este dispositivo (DJI Video Transmitter) está em conformidade
com os requisitos essenciais e outras disposições relevantes da Diretiva 2014/53/EU.
Existe uma cópia da Declaração de conformidade da UE disponível online em
www.dji.com/euro-compliance
Endereço de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Dichiarazione di conformità UE: SZ DJI OSMO TECHNOLOGY CO., LTD. dichiara che il
presente dispositivo (DJI Video Transmitter) è conforme ai requisiti essenziali e alle altre
disposizioni rilevanti della direttiva 2014/53/EU.
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web
www.dji.com/euro-compliance
Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Déclaration de conformité UE : Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que
cet appareil (DJI Video Transmitter) est conforme aux principales exigences et autres clauses
pertinentes de la directive européenne 2014/53/EU.
Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-
compliance
Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
PRÉCAUTIONS D'USAGE DE L'APPAREIL
N’utilisez pas l’appareil dans un hôpital, un avion ou un équipement automobile en raison
des radiofréquences qui peuvent produire des interférences
•Maintenez une distance minimale de 15 cm entre votre appareil et un stimulateur cardiaque
pour éviter toute interférence
Eloigner les équipements radioélectriques du ventre des femmes enceintes.
Eloigner les équipements radioélectriques du bas-ventre des adolescents.
Le débit d'absorption spécifique (DAS) local quantifie l'exposition de l'utilisateur aux ondes
électromagnétiques de l'équipement concerné. Le DAS maximal autorisé est de 2 W/ kg pour
la tête et le tronc et de 4 W/ kg pour les membres.
La ou les valeurs du débit d'absorption spécifique des XXXX(型号)
DAS tronc: XXXX W/ kg
DAS membres: XXXX W/ kg
EU-Compliance: Hiermit erklärt SZ DJI OSMO TECHNOLOGY CO., LTD., dass dieses Gerät
(DJI Video Transmitter) den wesentlichen Anforderungen und anderen einschlägigen
Bestimmungen der EU-Richtlinie 2014/53/EU entspricht.
Eine Kopie der EU-Konformitätserklärung finden Sie online auf www.dji.com/euro-
compliance
Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse
12, 97618, Niederlauer, Germany
Декларация за съответствие на ЕС:
SZ DJI OSMO TECHNOLOGY CO., LTD.
декларира,
че това устройство(DJI Video Transmitter) отговаря на основните изисквания и другите
приложими разпоредби на Директива 2014/53/ЕС.
Копие от Декларацията за съответствие на ЕС ще намерите онлайн на адрес
www.dji.com/euro-compliance
Адрес за контакт за ЕС: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Германия
Prohlášení o shodě pro EU: Společnost
SZ DJI OSMO TECHNOLOGY CO., LTD.
tímto
prohlašuje, že tohle začízení(DJI Video Transmitter) vyhovuje kladním požadavkčm a
dalším pčíslušným ustanovením směrnice 2014/53/EU.
Kopie prohlášení o shodě pro EU je k dispozici on-line na webu www.dji.com/euro-
compliance
Kontaktní adresa v EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Německo
EU-overensstemmelseserklæring:
SZ DJI OSMO TECHNOLOGY CO., LTD.
erklærer
hermed, at denne enhed (DJI Video Transmitter) er i overensstemmelse med de væsentlige
krav og andre relevante bestemmelser i direktiv 2014/53/EU.
Der er en kopi af EU-overensstemmelseserklæringen tilgængelig online på
www.dji.com/euro-compliance
EU-kontaktadresse: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland
Δήλωση Συμμόρφωσης ΕΕ: Η
SZ DJI OSMO TECHNOLOGY CO., LTD.
δια του παρόντος
δηλώνει ότι η συσκευή (DJI Video Transmitter) αυτή συμμορφώνεται με τις βασικές
απαιτήσεις και άλλες σχετικές διατάξεις της Οδηγίας 2014/53/EΕ.
Αντίγραφο της Δήλωσης Συμμόρφωσης ΕΕ διατίθεται ηλεκτρονικά στη διεύθυνση
www.dji.com/euro-compliance
Διεύθυνση επικοινωνίας στην ΕΕ: DJI GmbH, Industriestrasse
12, 97618, Niederlauer, Γερμανία
ELi vastavuskinnitus Käesolevaga teatab
SZ DJI OSMO TECHNOLOGY CO., LTD.
, et see
seade (DJI Video Transmitter) on kooskõlas direktiivi 2014/53/EL oluliste nõuete ja muude
asjakohaste sätetega.
ELi vastavusdeklaratsiooni koopia on kättesaadav veebis aadressil www.dji.com/euro-
compliance
Kontaktaadress ELis: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Saksamaa
Pranešimas dėl atitikties ES reikalavimams Bendrovė
SZ DJI OSMO TECHNOLOGY CO.,
LTD.
“ tvirtina, kad šis prietaisas (DJI Video Transmitter) atitinka pagrindinius 2014/53/ES
direktyvos reikalavimus ir kitas susijusias nuostatas.
ES atitikties deklaracijos kopijč galite rasti adresu www.dji.com/euro-compliance
ES kontaktinis adresas: „DJI GmbH“, Industriestrasse 12, 97618, Niederlauer, Germany
(Vokietija)
ES atbilstības paziņojums:
SZ DJI OSMO TECHNOLOGY CO., LTD.
ar šo apliecina, ka šī
ierīce (DJI Video Transmitter) atbilst direktīvas 2014/53/ES pamatprasībām un pārējiem
būtiskiem nosacījumiem.
ES atbilstības deklarācijas kopija pieejama tiešsaistē vietnē www.dji.com/euro-compliance
ES kontaktadrese: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Vācija
EU:n vaatimustenmukaisuusvakuutus:
SZ DJI OSMO TECHNOLOGY CO., LTD.
ilmoittaa
täten, että tämä laite (DJI Video Transmitter) on direktiivin 2014/53/EU olennaisten
vaatimusten ja sen muiden asiaankuuluvien ehtojen mukainen.
Kopio EU:n vaatimustenmukaisuusvakuutuksesta on saatavana verkossa osoitteessa
www.dji.com/euro-compliance
Yhteystiedot EU:ssa: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
RÁITEAS Comhlíonta an AE: Dearbhaíonn
SZ DJI OSMO TECHNOLOGY CO., LTD.
leis seo
go bhfuil an gléas seo (DJI Video Transmitter) de réir na gceanglas riachtanach agus na
bhforálacha ábhartha eile sa Treoir 2014/53/AE.
Tá coip de Dhearbhú Comhréireachta an AE ar fáil ar líne ag www.dji.com/euro-compliance
Seoladh teagmhála san AE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Dikjarazzjoni ta’ Konformità tal-UE:
SZ DJI OSMO TECHNOLOGY CO., LTD.
hawnhekk
tiddikjara li dan l-apparat (DJI Video Transmitter) huwa konformi mar-rekwičiti essenzjali u
ma’ dispočizzjonijiet relevanti očra tad-Direttiva 2014/53/UE.
Kopja tad-Dikjarazzjoni ta’ Konformità tal-UE hija disponibbli onlajn fis-sit
www.dji.com/euro-compliance
Indirizz ta’ kuntatt tal-UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, il-Ġerm anja
Declarația UE de conformitate: Prin prezenta,
SZ DJI OSMO TECHNOLOGY CO., LTD.
declarč faptul acest dispozitiv (DJI Video Transmitter) este conform cu cerințele esențiale
și celelalte prevederi relevante ale Directivei 2014/53/UE.
Un exemplar al Declarației UE de conformitate este disponibil online, la adresa
www.dji.com/euro-compliance
Adresa de contact pentru UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germania
Izjava EU o skladnosti: Družba
SZ DJI OSMO TECHNOLOGY CO., LTD.
izjavlja, da ta naprava
(DJI Video Transmitter) ustreza osnovnim zahtevam in drugim ustreznim določbam Direktive
2014/53/EU.
Kopija izjave EU o skladnosti je na voljo na spletu na www.dji.com/euro-compliance
Kontaktni naslov EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemčija
EU Izjava o sukladnosti: Tvrtka
SZ DJI OSMO TECHNOLOGY CO., LTD.
izjavljuje da je ovaj
urečaj (DJI Video Transmitter) izračen u skladu s osnovnim zahtjevima i ostalim relevantnim
odredbama Direktive 2014/53/EU.
Kopija EU Izjave o sukladnosti dostupna je na mrežnoj stranici www.dji.com/euro-compliance
Adresa EU kontakta: DJI GmbH, Industriestrasse 12 97618, Niederlauer, Njemačka
Vyhlásenie o zhode EÚ:
SZ DJI OSMO TECHNOLOGY CO., LTD.
týmto vyhlasuje, že toto
zariadenie (DJI Video Transmitter) je v zhode so základnými požiadavkami a čalšími
relevantnými ustanoveniami smernice 2014/53/EÚ.
Kópia tohto Vyhlásenia o zhode EÚ je k dispozícii online na www.dji.com/euro-compliance
Kontaktná adresa v EÚ: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemecko
Deklaracja zgodności UE: Firma
SZ DJI OSMO TECHNOLOGY CO., LTD.
niniejszym
očwiadcza, če przedmiotowe urzčdzenie (DJI Video Transmitter) jest zgodne z
zasadniczymi wymogami i innymi stosownymi postanowieniami dyrektywy 2014/53/UE.
Kopič deklaracji zgodnočci UE močna znalečč w Internecie na stronie
www.dji.com/euro-compliance
Adres do kontaktu w UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Niemcy
EU megfelelśségi nyilatkozat: A
SZ DJI OSMO TECHNOLOGY CO., LTD.
ezúton
megerčsíti, hogy ez az eszköz (DJI Video Transmitter) megfelel a 2014/53/EU Irányelv
alapvetč követelményeinek és más vonatkozó rendelkezéseinek.
Az EU megfelelčgi nyilatkozat másolata elérhetč a www.dji.com/euro-compliance
oldalon
EU kapcsolati cím: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Németország
EU-rsäkran om efterlevnad:
SZ DJI OSMO TECHNOLOGY CO., LTD.
härmed förklarar att
denna enhet (DJI Video Transmitter) uppfyller de väsentliga kraven och andra relevanta
bestämmelser i direktivet 2014/53/EU.
En kopia av EU-försäkran om efterlevnad finns att tillgå online på adressen
www.dji.com/euro-compliance
Kontaktadress EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland
Yfirlýsing um fylgni við reglur ESB:
SZ DJI OSMO TECHNOLOGY CO., LTD.
lýsir hér með
yfir þetta tæki (DJI Video Transmitter) hlíti mikilvægum kröfum og öðrum viðeigandi
ákvæðum tilskipunar 2014/53/ESB.
Nálgast má eintak af ESB-samræmisyfirlýsingunni á netinu á www.dji.com/euro-compliance
Heimilisfang ESB-tengiliðar: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
AB Uygunluk Beyanı:
SZ DJI OSMO TECHNOLOGY CO., LTD.
bu belge ile bu cihazın (DJI
Video Transmitter) temel gerekliliklere ve 2014/53/EU sayılı Direktifin diğer ilgili hükümlerine
uygun olduğunu be yan eder.
AB Uygunluk Beyanının bir kopyasına www.dji.com/euro-compliance adresinden çevrim içi
olarak ulaşılabilir
AB için iletişim adresi: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Almanya
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the
residual waste, but have to be disposed of separately. The disposal at the
communal collecting point via private persons is for free. The owner of old
appliances is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Umweltfreundliche Entsorgung
Dies ist das Symbol für die getrennte Sammlung von Elektro- und Elektronikgeräten.
Elektroaltgeräte dürfen nicht zusammen mit dem Restmüll entsorgt werden (einschließlich
Batterien, Akkus und Lampen), sondern müssen separat entsorgt werden. Die Entsorgung an
der kommunalen Sammelstelle durch Privatpersonen oder an den von Händlern oder
Herstellern eingerichteten Sammelstellen ist kostenlos. Der Besitzer von Altgeräten ist dafür
verantwortlich, die persönlichen oder vertraulichen Daten auf den zu entsorgenden
Altgeräten zu löschen und die Geräte zu diesen oder ähnlichen Sammelstellen zu bringen.
Die Händler sind verpflichtet, Elektroaltgeräte für dich kostenlos zurückzunehmen. Durch
diesen geringen Aufwand kannst du zur Wiederverwertung von wertvollen Rohmaterialien
beitragen und dafür sorgen, dass umweltschädliche und giftige Substanzen ordnungsgemäß
unschädlich gemacht werden.
Tratamiento de residuos responsable con el medio ambiente
Los aparatos eléctricos viejos no pueden desecharse junto con los residuos orgánicos, sino
que deben ser desechados por separado. Existen puntos limpios donde los ciudadanos
pueden dejar estos aparatos gratis. El propietario de los aparatos viejos es responsable de
llevarlos a estos puntos limpios o similares puntos de recogida. Con este pequeño esfuerzo
estás contribuyendo a reciclar valiosas materias primas y al tratamiento de residuos tóxicos.
Mise au rebut écologique
Les appareils électriques usagés ne doivent pas être éliminés avec les déchets résiduels. Ils
doivent être éliminés séparément. La mise au rebut au point de collecte municipal par
l'intermédiaire de particuliers est gratuite. Il incombe au propriétaire des appareils usagés de
les apporter à ces points de collecte ou à des points de collecte similaires. Avec ce petit effort
personnel, vous contribuez au recyclage de matières premières précieuses et au traitement
des substances toxiques.
Smaltimento ecologico
I vecchi dispositivi elettrici non devono essere smaltiti insieme ai rifiuti residui, ma devono
essere smaltiti separatamente. Lo smaltimento da parte di soggetti privati presso i punti di
raccolta pubblici è gratis. È responsabilità del proprietario dei vecchi dispositivi portarli presso
tali punti di raccolta o punti di raccolta analoghi. Grazie a questo piccolo impegno personale
contribuirete al riciclo di materie prime preziose e al corretto trattamento di sostanze tossiche.
Milieuvriendelijk afvoeren
Oude elektrische apparaten mogen niet worden weggegooid samen met het restafval, maar
moeten afzonderlijk worden afgevoerd. Afvoeren via het gemeentelijke inzamelpunt is gratis
voor particulieren. De eigenaar van oude toestellen is verantwoordelijk voor het inleveren van
de apparaten op deze of vergelijkbare inzamelpunten. Met deze kleine persoonlijke
inspanning lever je een bijdrage aan de recycling van waardevolle grondstoffen en de
verwerking van giftige stoffen.
Eliminação ecológica
Os aparelhos elétricos antigos não podem ser eliminados juntamente com os materiais
residuais. Têm de ser eliminados separadamente. A eliminação no ponto de recolha público
através de entidades particulares é gratuita. É da responsabilidade do proprietário de
aparelhos antigos le-los a estes pontos de recolha ou a pontos de recolha semelhantes.
Com este pequeno esforço pessoal, contribui para a reciclagem de matérias-primas úteis e
para o tratamento de substâncias tóxicas.
Изхвърляне с оглед опазване на околната среда
Старите електрически уреди не трябва да се изхвърлят заедно с битовите отпадъци, а
отделно. Изхвърлянето в общинския пункт за събиране на отпадъци от частни лица е
безплатно. Собственикът на старите уреди е отговорен за пренасянето на уредите до
тези или до подобни събирателни пунктове. С това малко собствено усилие допринасяте
за рециклирането на ценни суровини и за обработката на токсични вещества.
Ekologicky šetrná likvidace
Stará elektrická začízení nesmějí být likvidována spolu se zbytkovým odpadem, ale musí být
likvidována samostatně. Likvidace na komunálních sběrných místech prostčednictvím
soukromých osob je bezplatná. Vlastník starých začízení odpovídá za to, že je donese do
těchto sběrných míst nebo na obdobná sběrná místa. mto mčžete pčispět k recyklaci
hodnotných surovin a zpracování toxických látek.
Miljøvenlig bortskaffelse
Gamle elektriske apparater må ikke bortskaffes sammen med restaffald, men skal bortskaffes
separat. Bortskaffelse på et fælles indsamlingssted er gratis for privatpersoner. Ejere af gamle
apparater er ansvarlige for at bringe apparater hen til disse indsamlingssteder eller til lignende
indsamlingssteder. Med denne lille personlige indsats bidrager du til genanvendelse af
værdifulde råvarer og behandlingen af giftige stoffer.
Απόρριψη φιλική προς το περιβάλλον
Οι παλιές ηλεκτρικές συσκευές δεν πρέπει να απορρίπτονται μαζί με τα υπολειμματικά
απόβλητα, αλλά ξεχωριστά. Η απόρριψη στο δημοτικό σημείο συλλογής μέσω ιδιωτών
γίνεται χωρίς χρέωση. Ο κάτοχος παλιών συσκευών είναι υπεύθυνος για τη μεταφορά των
συσκευών σε αυτά ή παρόμοια σημεία συλλογής. Μέσω της ατομικής σας προσπάθειας,
συμβάλλετε στην ανακύκλωση πολύτιμων πρώτων υλών και την επεξεργασία των τοξικών
ουσιών.
Keskkonnasäästlik kasutuselt kõrvaldamine
Vanu elektriseadmeid ei tohi ära visata koos olmejäätmetega, vaid tuleb koguda ja kasutuselt
kõrvaldada eraldi. Kohaliku omavalitsuse elektroonikaromude kogumispunktis on äraandmine
eraisikutele tasuta. Vanade seadmete sellistesse või sarnastesse kogumispunktidesse
toimetamise eest vastutavad seadmete omanikud. Selle väikese isikliku panusega aitate kaasa
väärtusliku toorme ringlussevõtule ja mürgiste ainete töötlemisele.
Utilizavimas nekenkiant aplinkai
Senų elektrinių prietaisų negalima mesti kartu su buitinė mis atliekomis; juos tina
utilizuoti atskirai. Tokių prietaisų utilizavimas per komunalinius atliekų surinkimo punktus
yra nemokamas. Elektrinių prietaisų savininkai utilizuojamus prietaisus privalo priduoti į
atitinkamus arba analogiškus atliekų surinkimo punktus. Tokiu būdu, į dė dami nedaug
pastangų, prisidė site prie vertin meia perdirbimo ir aplinkos apsaugojimo nuo
toksinių meia .
Videi draudzīga atkritumu likvidēšana
Vecas elektriskās ierīces nedrīkst likvidēt kopā ar rējiem atkritumiem, bet s jālikvi
atsevišķi. Privātperso nām atkritumu likvidēšana komunālajā savākšanas punktā ir bez maksas.
Veco ierīču īpašnieks ir atbildīgs par ierīču nogādāšanu šajos savākšanas punktos vai
līdzīgos savākšanas punktos. Ar šīm nelielām personiskajām pūlēm jūs veicināt vērtīgu
izejmateriālu pārstrādi un toksisko vielu apstrādi.
Hävittäminen ympäristöystävällisesti
Vanhoja sähkölaitteita ei saa hävittää kaatopaikkajätteen mukana, vaan ne on hävitettävä
erikseen. Kunnalliseen keräyspisteeseen vieminen on yksityishenkilölle ilmaista. Vanhojen
laitteiden omistaja vastaa laitteiden toimittamisesta kyseisiin keräyspisteisiin tai vastaaviin.
Tällä vähäisellä henkilökohtaisella vaivalla edistät omalta osaltasi arvokkaiden raaka-aineiden
kierrätystä ja myrkyllisten aineiden käsittelyä.
Diúscairt neamhdhíobhálach don chomhshaol
Níor cheart seanghléasanna leictreacha a dhiúscairt leis an dramhaíl iarmharach, ach caithfear
iad a chur de láimh astu féin. Tá an diúscairt ag an ionad bailiúcháin pobail ag daoine
príobháideacha saor in aisce. Tá freagracht ar úinéir seanghléasanna na gléasanna a thabhairt
chuig na hionaid bhailiúcháin sin nó chuig ionaid bhailiúcháin den chineál céanna. Le hiarracht
bheag phearsanta mar sin, cuidíonn tú le hamhábhair luachmhara a athchúrsáil agus le
substaintí tocsaineacha a chóireáil
Rimi li jirrispetta l-ambjent
L-apparat elettriku qadim ma gčandux jintrema flimkien ma’ skart residwu, ičda gčandu
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

dji TX32021028 Manualul utilizatorului

Tip
Manualul utilizatorului