Yamaha RX-SL100 Manualul proprietarului

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

©

RX-SL100RDS

AV Receiver

Ampli-tuner audio-vidéo

RX-SL100RDS

OWNER'S MANUAL

MODE D'EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

GB

INPUT

VOLUME/SELECT

DSPTUNER

AUTO/MAN'L

PUSH-ENTER

STANDBY

/ON

PHONES VIDEO AUDIO

VIDEO 2

SILENT

OPTICALL R

Printed in Malaysia WC19140-1

00_RXSL100_RDS_cv.fm Page 1 Wednesday, November 26, 2003 1:29 PM

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool,

dry, clean place — away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 5 cm on the top,

5 cm on the left and right, and 10 cm on the back of

this unit.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this

unit in a environment with high humidity (i.e. a

room with a humidifier) to prevent condensation

inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal

injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed

to liquid dripping or splashing. On the top of this

unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may

cause fire, damage to this unit, and/or personal

injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation.

If the temperature inside this unit rises, it may

cause fire, damage to this unit, and/or personal

injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

13 To prevent damage by lightning, disconnect the

power cord from the wall outlet during an electrical

storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding

that this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set

this unit in the standby mode, and disconnect the

AC power plug from the wall outlet.

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet, even

if this unit itself is turned off. This state is called the

standby mode. In this state, this unit is designed to

consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

01EN.00_RX-SL100RDS.book Page i Thursday, November 27, 2003 12:42 PM

1

English

PREPARATIONINTRODUCTION

BASIC

OPERATION

SOUND FIELD

PROGRAMS

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

FEATURES............................................................. 2

GETTING STARTED............................................ 3

Supplied accessories .................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel ................................................................. 4

Remote control (AMP mode) .................................... 5

Using the remote control ........................................... 6

Front panel display .................................................... 7

SPEAKER SETUP ................................................. 8

Speaker placement ..................................................... 8

Speaker connections .................................................. 9

CONNECTIONS .................................................. 12

Before connecting components................................ 12

Connecting other components ................................. 12

Connecting the antennas.......................................... 14

Connecting the power.............................................. 15

Turning on the power............................................... 15

BASIC SETUP...................................................... 16

Using BASIC setup.................................................. 16

PLAYBACK.......................................................... 19

Basic operations....................................................... 19

Selecting sound field programs ............................... 20

TUNING ................................................................ 22

Automatic and manual tuning.................................. 22

Presetting stations .................................................... 24

Selecting preset stations........................................... 25

Receiving RDS stations ........................................... 26

Changing the RDS mode ......................................... 27

PTY SEEK function ................................................ 27

EON function........................................................... 28

RECORDING ....................................................... 29

Recording in standby mode

(Standby SCART setting).................................... 29

SOUND FIELD PROGRAM

DESCRIPTIONS...............................................30

For Hi-Fi DSP programs.......................................... 30

For CINEMA-DSP programs .................................. 31

ADVANCED OPERATIONS ..............................32

Using the sleep timer ............................................... 32

Enjoying multi-channel software............................. 32

Enjoying 2-channel software ................................... 33

Virtual CINEMA DSP............................................. 34

Selecting input modes.............................................. 34

Manually adjusting speaker levels........................... 36

Using the test tone ................................................... 37

SET MENU ............................................................38

Changing parameter settings ................................... 39

SOUND menu.......................................................... 40

INPUT menu............................................................ 43

OPTION menu......................................................... 44

REMOTE CONTROL FEATURES ...................46

Control area ............................................................. 46

Setting manufacturer codes...................................... 47

Controlling other components ................................. 48

EDITING SOUND FIELD PARAMETERS ......49

What is a sound field ............................................... 49

Sound field parameter descriptions ......................... 49

TROUBLESHOOTING .......................................51

GLOSSARY...........................................................56

SPECIFICATIONS...............................................58

CONTENTS

INTRODUCTION

PREPARATION

BASIC OPERATION

SOUND FIELD PROGRAMS

ADVANCED OPERATION

ADDITIONAL INFORMATION

01EN.00_RX-SL100RDS.book Page 1 Thursday, November 27, 2003 12:42 PM

FEATURES

2

Built-in 6-channel original Yamaha digital

power amplifier

◆ Minimum RMS output power

(0.9% THD, 1 kHz, 6Ω)

Front: 70 W + 70 W

Center: 70 W

Surround: 70 W + 70 W

Surround Back: 70 W

◆ (10% THD, 1 kHz, 4Ω)

Front: 75 W + 75 W

Center: 75 W

Surround: 75 W + 75 W

Surround Back: 75 W

Sound field features

◆ Proprietary YAMAHA technology for the creation of

sound fields

◆ Dolby Digital/Dolby Digital EX, DTS/DTS-ES Matrix

6.1, Discrete 6.1, DTS Neo:6, Dolby Pro Logic/Dolby

Pro Logic II/Pro Logic IIx decoder

◆ Virtual CINEMA DSP

◆ SILENT CINEMA

™

Sophisticated AM/FM tuner

◆ 40-station random access preset tuning

◆ Automatic preset tuning

Graphical User Interface (GUI)

◆ Large on-screen display output to your TV monitor

◆ “SET MENU” which provides you with items for

optimizing this unit for your audio/video system

◆ Easy to use

Other features

◆ 96-kHz/24-bit D/A converter

◆ Slim-line design

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Night listening mode

◆ Remote control with preset manufacturer codes

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button

names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In

case of differences between the manual and product, the product has priority.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks

of Dolby Laboratories.

“DTS” and “DTS-ES Digital Surround” and “Neo:6” are

trademarks of Digital Theater Systems, Inc.

SILENT CINEMA is a trademark of YAMAHA

CORPORATION.

• The following name plate is located on the bottom of this unit.

FEATURES

01EN.00_RX-SL100RDS.book Page 2 Thursday, November 27, 2003 12:42 PM

GETTING STARTED

3

English

INTRODUCTION

Please check that you received all of the following parts.

Insert the batteries in the correct direction by aligning the

+ and – marks on the batteries with the polarity markings

(+ and –) inside the battery component.

1 Remove the back cover.

2 Insert the two supplied batteries (AA, R6,

UM-3) into the battery compartment.

3 Close the back cover.

Notes on batteries

• Change all of the batteries if you notice that the operation range

of the remote control has decreased.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

GETTING STARTED

Supplied accessories

1

HALL

2

JAZZ

3

ROCK

4

ENTERTAIN

SLEEP

STANDBY/ON

5

MUSIC

6

TV THTR

7

MOVIE 1

8

MOVIE 2

9

TV AV

CODE SET

REC

s

FREQ/RDS

AUDIO

EON

w

DISC SKIP

e

MODE

PTY SEEK

f

START

b

A/B/C/D/E

TITLE

LEVEL

ENTER

CH

–

CH

+

p

d

MUTE

TV VOL VOLUME

AMP

VCRDVD/CD VIDEO 1

TUNERDTV/CBL VIDEO 2

PRESET

a

u

q/DTS

0

NIGHT

+10

EX/ES

ENT

STEREO

EFFECT

MUTE INPUT

–

CH

TV MODE

+

RX-SL100RDS

MENU

SET MENU

RETURN

TEST

DISPLAY

Remote control

Indoor FM antenna

(U.S.A., Canada, Asia and

General models)

(U.K., Europe and

Australia models)

Batteries (2)

(AA, R6, UM-3)

AM loop antenna

Remote control

Cable tags (6 pairs)

Installing batteries in the remote control

Check +/–

polarity

Press

If the remote control is without batteries for more than

3 minutes, or if exhausted batteries remain in the

remote control, the contents of the memory may be

cleared. When the memory is cleared, insert new

batteries, set up the manufacturer code and program

any acquired functions that may have been cleared.

01EN.00_RX-SL100RDS.book Page 3 Thursday, November 27, 2003 12:42 PM

CONTROLS AND FUNCTIONS

4

1 STANDBY/ON

Turns on this unit or sets it to the standby mode. When you

turn on this unit, you will hear a click and there will be a 4

to 5-second delay before this unit can reproduce sound.

In standby mode, this unit consumes a small amount of power in

order to receive infrared-signals from the remote control.

2 SILENT (PHONES jack)

Outputs audio signals for private listening with

headphones. When you connect headphones, no signals

are output to the OUTPUT jacks or to the speakers.

All Dolby Digital and DTS audio signals are mixed down

to the left and right headphone channels.

3 VIDEO 2 jacks

Input audio and video signals from a portable external

source such as a game console. To reproduce source

signals from these jacks, select VIDEO 2 as the input

source.

4 Remote control sensor

Receives signals from the remote control.

5 Front panel display

Shows information about the operational status of this

unit.

6 VOLUME/SELECT

Adjusts the volume. Also selects stations, sound field

programs or input sources (etc.) when used together with

TUNER, DSP or INPUT. If no operation is performed

within 5 seconds of pressing TUNER, DSP or INPUT, the

VOLUME/SELECT function automatically returns to

volume.

7 INPUT

Activates the input select mode.

Activates the AM, FM or preset tuning mode when

TUNER is selected as the input source.

8 DSP

Activates the DSP sound field select mode or STEREO

mode.

9 TUNER (AUTO/MAN’L)

Activates the tuning mode when TUNER is selected as the

input source. Press before turning VOLUME/SELECT to

tune in frequencies or preset radio stations.

Switches the AM/FM tuning mode between automatic

(“AUTO” indicator on) and manual (“AUTO” indicator

off) tuning.

CONTROLS AND FUNCTIONS

Front panel

INPUT

VOLUME/SELECT

DSPTUNER

AUTO/ MAN' L

PUSH-ENTER

STANDBY

/ON

PHONES VIDEO AUDIO

VIDEO 2

SILENT

OPTICALL R

12 3 5 6

789

4

Note

01EN.00_RX-SL100RDS.book Page 4 Thursday, November 27, 2003 12:42 PM

CONTROLS AND FUNCTIONS

5

English

INTRODUCTION

Make sure that the AMP mode is selected before starting

operation.

1 Infrared window

Outputs infrared control signals. Aim this window at the

component you want to operate.

2 STANDBY/ON

Switches the unit on and sets it in the STANDBY mode.

3 DSP program / Numeric buttons

Use to select sound field programs or input numbers

according to the current control area.

4 Operation buttons

Provide functions such as play, stop, skip, etc. for use

when operating other components.

5 LEVEL

Selects the speaker channel to be adjusted and sets the

level.

6 TEST

Outputs the test tone to adjust the speaker levels.

7 MUTE

Mutes the sound. Press again to restore the audio output to

the previous volume level.

8 AMP

Sets the remote control to the AMP mode for controlling

this unit (instead of the component selected using the

input selector buttons).

9 SLEEP

Sets the sleep timer.

0 NIGHT

Turns night listening mode on or off.

A EX/ES

Turns the Dolby Digital EX or DTS-ES decoder on or off.

B STEREO/EFFECT

Switches between normal stereo and DSP effect

reproduction. Select STEREO if you want this unit to

output pure sound from the front left and right speakers.

C CODE SET

Used to set up manufacturer codes.

Remote control (AMP mode)

1

HALL

2

JAZZ

3

ROCK

4

ENTERTAIN

SLEEP

STANDBY/ON

5

MUSIC

6

TV THTR

7

MOVIE 1

8

MOVIE 2

9

TV AV

CODE SET

REC

s

FREQ/RDS

AUDIO

EON

w

DISC SKIP

e

MODE

PTY SEEK

f

START

b

A/B/C/D/E

TITLE

LEVEL

ENTER

CH

–

CH

+

p

d

MUTE

TV VOL VOLUME

AMP

VCRDVD/CD VIDEO 1

TUNERDTV/CBL VIDEO 2

PRESET

a

u

q/DTS

0

NIGHT

+10

EX/ES

ENT

STEREO

EFFECT

MUTE INPUT

–

CH

TV MODE

+

RX-SL100RDS

MENU

SET MENU

RETURN

TEST

DISPLAY

1

2

3

5

6

7

8

9

F

0,A,B

C

D

E

G

4

01EN.00_RX-SL100RDS.book Page 5 Thursday, November 27, 2003 12:42 PM

CONTROLS AND FUNCTIONS

6

D SET MENU

Turns the SET MENU on or off.

E Multi control section

Use to select and adjust DSP program parameters or SET

MENU items.

F VOLUME +/–

Increases or decreases the volume level.

G Input selector buttons

Use to select the input source and change the control area.

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

■ Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– high humidity such as near a bath

– high temperature such as near a heater or stove

– extremely low temperature

– dusty places

Using the remote control

30 30

1

HALL

2

JAZZ

3

ROCK

4

ENTERTAIN

SLEEP

STANDBY/ON

5

MUSIC

6

TV THTR

7

MOVIE 1

8

MOVIE 2

9

TV AV

CODE SET

REC

s

FREQ/RDS

AUDIO

EON

w

DISC SKIP

e

MODE

PTY SEEK

f

START

b

A/B/C/D/E

TITLE

LEVEL

ENTER

CH

–

CH

+

p

d

MUTE

TV VOL VOLUME

AMP

VCRDVD/CD VIDEO 1

TUNERDTV/CBL VIDEO 2

PRESET

a

u

q/DTS

0

NIGHT

+10

EX/ES

ENT

STEREO

EFFECT

MUTE INPUT

–

CH

TV MODE

+

RX-SL100RDS

MENU

SET MENU

RETURN

TEST

DISPLAY

INPUT

VOLUME/SELECT

DSPTUNER

AUTO/MAN'L

PUSH-ENTER

STANDBY

/ON

PHONES VIDEO AUDIO

VIDEO 2

SILENT

OPTICALL R

Approximately 6 m (20 ft)

01EN.00_RX-SL100RDS.book Page 6 Thursday, November 27, 2003 12:42 PM

CONTROLS AND FUNCTIONS

7

English

INTRODUCTION

1 Processor indicators

When any of this unit’s decoders function, the respective

indicator lights up.

2 NIGHT indicator

Lights up when you select NIGHT LISTENING mode.

3 Headphones indicator

Lights up when headphones are connected.

4 CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field

program.

5 Input source indicators

A cursor lights to show the current input source.

6 VOLUME level indicators

Indicate the volume level.

7 MUTE indicator

Flashes while the MUTE function is on.

8 SLEEP indicator

Lights up while the sleep timer is on.

9 MEMORY indicator

Flashes to show a station can be stored in memory.

0 Input channel indicators

Indicates the channel components of the input digital

signal.

A LFE indicator

Lights up when the input signal contains the LFE signal.

B AUTO indicator

Shows that this unit is in the automatic tuning mode.

C TUNED indicator

Lights up when this unit is tuned into a station.

D STEREO indicator

Lights up when this unit is receiving a strong signal for an

FM stereo broadcast while the “AUTO” indicator is lit.

E RDS indicators

(U.K. and Europe models only)

The name(s) of the RDS data offered by the currently

received RDS station light(s) up.

EON lights up when an RDS station that offers the EON

data service is being received.

PTY HOLD lights up while searching for stations in the

PTY SEEK mode.

F HiFi DSP indicator

Lights up when you select a HiFi DSP sound field

program.

G Multi-information display

Shows the current sound field program name and other

information when adjusting or changing settings.

H SILENT indicator

Lights up when headphones are connected and a sound

field program is selected (see page 20).

I VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see

page 34).

J PCM indicator

Lights up when this unit is reproducing PCM (pulse code

modulation) digital audio signals.

Front panel display

VCR

PS PTY RT CT PTY HOLD EON STEREO TUNED

AUTO MEMORY

MUTE

VOLUME

SLEEP

DIGITAL

PL

MATRIX DISCRETE

PCM

VIRTUAL

ES

EX

NIGHT

SILENT

LFE

ft

mS

dB

L

L C R

SL SB SR

HiFi DSP

VIDEO 1 VIDEO 2

DTV/CBL

TUNER

DVD/CD

1234 5 678

JI H G E A09BCDF

01EN.00_RX-SL100RDS.book Page 7 Thursday, November 27, 2003 12:42 PM

SPEAKER SETUP

8

y

The speaker layout above shows the standard ITU-R speaker

setting.

Front speakers (FR and FL)

The front speakers are used for the main source sound plus

effect sounds. Place these speakers an equal distance from

the ideal listening position. The distance of each speaker

from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds

(dialog, vocals, etc.). If for some reason it is not practical

to use a center speaker, you can do without it. Best results,

however, are obtained with the full system. Align the front

face of the center speaker with the front face of your video

monitor. Place the speaker centrally between the front

speakers and as close to the monitor as possible, such as

directly over or under it.

Surround speakers (SR and SL)

The surround speakers are used for effect and surround

sounds. Place these speakers behind your listening

position, facing slightly inwards, about 1.8 m (6 ft) above

the floor.

Surround back speaker (SB)

The surround back speaker supplements the surround

speakers and provide for more realistic front-to-back

transitions. Place this speaker directly behind the listening

position and at the same height as the surround speakers.

Subwoofer

The use of a subwoofer, such as the YAMAHA Active

Servo Processing Subwoofer System, is effective not only

for reinforcing bass frequencies from any or all channels,

but also for high fidelity reproduction of the LFE (low-

frequency effect) channel included in Dolby Digital and

DTS software. The position of the subwoofer is not so

critical, because low bass sounds are not highly

directional. But it is better to place the subwoofer near the

front speakers. Turn it slightly toward the center of the

room to reduce wall reflections.

SPEAKER SETUP

Speaker placement

60˚

30˚

SB

FL

FR

C

SL

SR

80˚

SL

1.8 m

01EN.00_RX-SL100RDS.book Page 8 Thursday, November 27, 2003 12:42 PM

9

English

SPEAKER SETUP

PREPARATION

Be sure to connect the left channel (L), right channel (R),

“+” (colored) and “–” (black) properly. If the connections

are faulty, no sound will be heard from the speakers, and if

the polarity of the speaker connections is incorrect, the

sound will be unnatural and lack bass.

• If you will use 6 ohm speakers, be sure to set this unit’s

speaker impedance setting to 6 ohms before using (see

“IMPEDANCE SELECTOR switch” on page 10).

• Before connecting the speakers, make sure that the

power of this unit is off.

• Do not let the bare speaker wires touch each other or do

not let them touch any metal part of this unit. This

could damage this unit and/or speakers.

• Use magnetically shielded speakers. If this type of

speakers still creates the interference with the monitor,

place the speakers away from the monitor.

A speaker cord is actually a pair of insulated cables

running side by side. One cable is colored or shaped

differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+”

(colored) terminals on this unit and your speaker. Connect

the plain cable to the “–” (black) terminals.

1 Remove approximately 10 mm (3/8") of

insulation from each of the speaker cables.

2 Twist the exposed wires of the cable together

to prevent short circuits.

3 Press and hold the tab to insert the speaker

wire.

4 Return the tab to secure the wire.

■ Cable tags

6 pairs of different colored cable tags are provided with

this product. The colors of the cable tags and their

respective speaker cables are as follows:

• Red: Front right speaker cable

• White: Front left speaker cable

• Green: Center speaker cable

• Gray: Surround right speaker cable

• Blue: Surround left speaker cable

• Brown: Surround back speaker cable

To make it easier to distinguish the various speaker cables,

attach the colored tags to the appropriate speaker cables as

shown below.

Speaker connections

CAUTION

10 mm (3/8")

1

2

R

L

Colored: positive (+)

Black: negative (–)

01EN.00_RX-SL100RDS.book Page 9 Thursday, November 27, 2003 12:42 PM

10

SPEAKER SETUP

■ IMPEDANCE SELECTOR switch

Do not change the setting of the IMPEDANCE

SELECTOR switch when the unit power is switched on,

as doing so may damage the unit.

If this unit fails to turn on when STANDBY/ON is pressed

on either the front panel or remote control, the

IMPEDANCE SELECTOR switch may not be fully slid to

either position. If this is the case, slide the switch all the

way to either position when this unit is in standby mode.

Be sure to move this switch only when this unit is in

standby mode.

Select the switch position (top or bottom) according to the

impedance of the speakers in your system.

Switch

position

Speaker Impedance level

Top

Front

The impedance of each speaker

must be 4 Ω or higher.

Center, Surround

back, Surround

Bottom

Front

The impedance of each speaker

must be 6 Ω or higher.

Center, Surround

back, Surround

CAUTION

MAINS

IMPEDANCE SELECTOR switch

01EN.00_RX-SL100RDS.book Page 10 Thursday, November 27, 2003 12:42 PM

11

English

SPEAKER SETUP

PREPARATION

■ Speaker connections

■ FRONT terminals

Connect your speaker system to these terminals.

■ SURROUND terminals

Connect surround speakers to these terminals.

■ SURROUND BACK terminals

Connect a surround back speaker to these terminals.

■ CENTER terminals

Connect a center speaker to these terminals.

■ SUBWOOFER OUTPUT jack

Connect a subwoofer with built-in amplifier, such as the

YAMAHA Active Servo Processing Subwoofer System,

to this jack.

y

You can easily distinguish between the cable pairs by attaching a

supplied cable tag to each end of the respective speaker cable (see

page 9).

• The cut-off frequency for the SUBWOOFER jack is 90 Hz.

• If you are not using a subwoofer, allocate the signals to the front

left and right speakers by changing the setting item “LFE/Bass

Out” to FRONT on the SOUND menu.

• Use the control on the subwoofer to adjust its volume level. You

can also adjust the volume level using this unit’s remote control

(see page 36).

AM ANT FM ANT

75

Ω

UNBAL

OPTICAL

DVD

/CD

DTV

/CBL

VIDEO 1

SUBWOOFER

FRONT

R

SURR BACKCENTER SURROUND

123

COAXIAL

GND

TUNER

EXT. IN/OUT

OUTPUT

TV IN/OUT

SPEAKERS

MAINS

DIGITAL

INPUT

L R L

–

+

–

+

71 2 4365

• The surround back speaker outputs the surround back channel included in Dolby Digital EX and DTS-ES software and only

operates when the Dolby Digital EX or DTS-ES decoder is turned on.

Center

speaker

Front

speakers

Surround

speakers

Surround back

speaker

Subwoofer

system

Right LeftRight Left

Notes

7

1

2

6

5

4

3

Speaker layout

01EN.00_RX-SL100RDS.book Page 11 Thursday, November 27, 2003 12:42 PM

CONNECTIONS

12

Do not connect this unit or other components to the mains power until all connections between components are complete.

• Make sure that all connections are made correctly - that is to say, L (left) to L, R (right) to R, “+” to “+” and “–”

to “–”. Some components require different connection methods and have different jack names. Refer to the operating

instructions for each component you wish to connect to this unit.

• After you have completed all connections, check them again to make sure they are correct.

• The jack names correspond to the names on the input selector.

■ Connecting a TV

Connect one end of the SCART cable to the TV/IN OUT connector on this unit and the other end to the SCART

connector on your TV.

■ Connecting AV components

Connect one end of the SCART cable to the EXT. IN/OUT connector on this unit and the other end to the SCART

connector on your AV component. You can also daisy chain several SCART components together as shown in “Digital

audio connections” (page 13).

Use a SCART cable to make the above connections. The SCART cable, or “Euro AV cable”, supports IN/OUT signal transmission,

providing you with the best possible picture and sound.

CONNECTIONS

Before connecting components

Connecting other components

Note

CAUTION

AM ANT FM ANT

75

Ω

UNBAL

OPTICAL

DVD

/CD

DTV

/CBL

VIDEO 1

SUBWOOFER

FRONT

R

SURR BACKCENTER SURROUND

123

COAXIAL

GND

TUNER

EXT. IN/OUT

OUTPUT

TV IN/OUT

SPEAKERS

MAINS

DIGITAL

INPUT

L R L

–

+

–

+

AV component

(DVD player, cable tuner, etc.)

TV

01EN.00_RX-SL100RDS.book Page 12 Thursday, November 27, 2003 12:42 PM

13

English

CONNECTIONS

PREPARATION

■ Digital audio connections

Connect the optical or coaxial digital output on your components to the corresponding DIGITAL INPUT jacks.

Use OPTICAL 1 (DVD/CD) to connect a DVD or CD player.

Use OPTICAL 2 (DTV/CBL) to connect a DTV or cable tuners.

y

You can assign components to this unit’s DIGITAL INPUT jacks using the INPUT and VOLUME/SELECT controls on the front panel

(or the input selector buttons on the remote control) (page 43).

• The OPTICAL jacks on this unit conform to the EIA standard. If you use a fiber optic cable that does not conform to this standard, this

unit may not function properly.

• You may experience some image distortion if your VCR is connected to this unit through your DVD player rather than being directly

connected to this unit.

■ VIDEO 2 jacks (on the front panel)

Use these jacks to connect any video source, such as a game console or video camera, to this unit.

Notes

Optical out

SCART

RX-SL100RDS

DTV or

Cable tuner

DVD player

VIDEO AUDIO

VIDEO 2

OPTICALL R

O

V

L

R

Game console

or video

camera

Video out

Audio out L

Audio out R

Optical out

01EN.00_RX-SL100RDS.book Page 13 Thursday, November 27, 2003 12:42 PM

14

CONNECTIONS

Both AM and FM indoor antennas are included with this

unit. In general, these antennas should provide sufficient

signal strength. Connect each antenna correctly to the

designated terminals.

■ Connecting the AM loop antenna

1 Set up the AM loop antenna, then connect it

to the terminals on this unit.

2 Press and hold the tab to insert the white

cord into the AM ANT terminal and the black

cord into the GND terminal.

3 Orient the AM loop antenna for the best

reception.

• The AM loop antenna should be placed away from this unit and

all speaker cords.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

• A properly installed outdoor antenna provides clearer reception

than an indoor one. If you experience poor reception quality, an

outdoor antenna may improve the quality. Consult the nearest

authorized YAMAHA dealer or service center about outdoor

antennas.

■ Frequency Step (Asia and General

models only)

Because the interstation frequency spacing differs in

different areas, set the FREQUENCY STEP (using the on-

screen display operations) according to the frequency

spacing in your area (see page 45).

• North, Central and South America: 100 kHz/10 kHz

• Other areas: 50 kHz/9 kHz

Connecting the antennas

AM ANT FM ANT

75Ω UNBAL

GND

TUNER

AM loop antenna

(included)

Ground (GND terminal)

For minimum interference, connect the

antenna

GND terminal to a good earth

ground. A good earth ground is a metal

stake driven into moist earth.

Indoor FM antenna

(included)

Black

W h i t e

Notes

01EN.00_RX-SL100RDS.book Page 14 Thursday, November 27, 2003 12:42 PM

15

English

CONNECTIONS

PREPARATION

■ Connecting the AC power

After all other connections are complete, plug the power

cord to an AC wall outlet.

■ Memory back-up

The memory back-up circuit prevents the stored data from

being lost even if this unit is in the standby mode.

However if the power cord is disconnected from the AC

wall outlet, or the power supply is cut for more than one

week, the stored data will be lost.

When all connections are complete, turn on the power of

this unit.

1 Press STANDBY/ON on the front panel or

remote control to turn on the power of this

unit.

The level of the main volume, and then the current

sound field program name appear on the front panel

display.

2 Turn on the video monitor connected to this

unit.

Connecting the power Turning on the power

INPUT

VOLUME/SELECT

DSPTUNER

AUTO/MA N'L

PUSH-ENTER

STANDBY

/ON

PHONES VIDEO AUDIO

VIDEO 2

SILENT

OPTICALL R

1

HALL

2

JAZZ

3

ROCK

4

ENTERTAIN

SLEEP

STANDBY/ON

5

MUSIC

6

TV THTR

7

MOVIE 1

8

MOVIE 2

9

TV AV

CODE SET

REC

s

FREQ/RDS

AUDIO

EON

DISC SKIP

MODE

PTY SEEK

START

q/DTS

0

NIGHT

+10

EX/ES

ENT

STEREO

EFFECT

1

or

STANDBY

/ON

STANDBY/ON

or

Front panel

Remote control

01EN.00_RX-SL100RDS.book Page 15 Thursday, November 27, 2003 12:42 PM

BASIC SETUP

16

The BASIC setup feature is a useful way to setup your

system quickly and with minimal effort. The BASIC setup

items are displayed on both the front panel of this unit and

your video monitor. By using the GUI (on your video

monitor), you can easily make any necessary settings.

y

• In addition to using the BASIC menu, you can use the detailed

parameters in the SOUND menu (page 40) to manually

configure this unit using more precise adjustments.

• Altering any parameters in the BASIC menu will reset

parameters in the SOUND menu.

• The explanations in this document are based on the GUI. The

characters shown in the front panel display may differ from

those on the GUI.

■ Speaker Set Up

1 Switch on the receiver and video monitor.

Make sure the OSD is displayed on your video

monitor.

2 Press AMP.

3 Press SET MENU.

The top display appears on your video monitor.

4 Press k/n repeatedly to select BASIC menu,

then press h.

5 Press k/n repeatedly to select Speaker Set

Up, then press h.

BASIC SETUP

Using BASIC setup

b

TITLE

LEVEL

ENTER

CH

–

CH

+

p

MUTE

TV VOL VOLUME

AMP

VCRDVD/CD VIDEO 1

TUNERDTV/CBL VIDEO 2

a

MUTE INPUT

–

CH

TV MODE

+

RX-SL100RDS

MENU

SET MENU

RETURN

TEST

DISPLAY

3

4-10

2

AMP

MENU

SET MENU

OPTION menu

BASIC menu Speaker Set Up

SOUND menu Speaker Level

INPUT menu

ENTER

Speaker Set Up Room Size

Speaker Level Subwoofer Set

Speaker Num

01EN.00_RX-SL100RDS.book Page 16 Thursday, November 27, 2003 12:42 PM

17

English

BASIC SETUP

PREPARATION

6 Press k/n repeatedly to select Room Size,

then press ENTER.

Use k/n to select the size of the room you have

installed your speakers in, then press ENTER.

Roughly speaking, the room sizes are defined as

follows:

[U.S.A. and Canada models]

S (small) 16 x 13 ft, 200 sq. ft

(4.8 x 4.0 m, 20 m

2

)

M (medium) 20 x 16 ft, 300 sq. ft

(6.3 x 5.0 m, 30 m

2

)

L (large) 26 x 19 ft, 450 sq. ft

(7.9 x 5.8 m, 45 m

2

)

[Other models]

S (small) 3.6 x 2.8 m, 10 m

2

M (medium) 4.8 x 4.0 m, 20 m

2

L (large) 6.3 x 5.0 m, 30 m

2

7 Press k/n repeatedly to select Subwoofer

Set, then press ENTER.

Use k/n to select Yes or None, then press ENTER.

Yes If you have a subwoofer in your system.

None If you do not have a subwoofer in your system.

8 Press k/n repeatedly to select Speaker Num,

then press ENTER.

Use k/n to select the number of speakers connected

to the unit, then press ENTER. The choices vary as

follows:

9 After you have finished the settings, press n

repeatedly to select Setting OK?, then press

ENTER.

Use k/n to select Set or Cancel, then press ENTER.

Set To apply the changes and start the test

tone.

Cancel To cancel the changes and return to

Speaker Set Up.

Use the test tone to check the speaker levels.

If you selected Set, the display changes to “CHECK:

Test Tone”, and the unit outputs a test tone from each

speaker in turn. When the test tone begins, the display

changes to “CHECK OK: YES”.

• The unit cycles the test tone around each of the speakers in turn

twice.

• The indicator of the speaker currently outputting the test tone

flashes on the front panel display.

10 Press k/n repeatedly to select Yes or No,

then press ENTER.

Yes To return to Speaker Set Up.

No To enter Speaker Level.

■ Speaker Level

Use this menu to compare and adjust the test tone output

from each speaker to the output from the left front (or left

surround) speaker so that the volume level for all speakers

is identical.

Press ENTER to enter the Speaker Level

adjustment menu, then press k/n to select a

speaker and adjust the balance using l / h.

The unit outputs the test tone from the selected speaker

and the left front (or left surround) speaker in turn. The

indicator of the speaker currently outputting the test tone

flashes on the front panel display.

Choices Display Speakers

2 spk

Front L/R

3 spk

Front L/R, Center

4 spk

Front L/R, Surround L/R

5 spk

Front L/R, Center, Surround L/R

6 spk

Front L/R, Center, Surround L/R,

Surround back

LL C R

SL SB SR

LL CR

SL SB SR

LL C R

SL SB SR

LL C R

SL SB

SB

SR

LL C R

SL SB SR

Notes

Front

Speaker Set Up Center

Speaker Level Sur L

Sur R

Sur Back

01EN.00_RX-SL100RDS.book Page 17 Thursday, November 27, 2003 12:42 PM

18

BASIC SETUP

Front Adjusts the balance between the front left and right

speakers.

Center Adjusts the balance between the front left and

center speakers.

Sur L Adjusts the balance between the front left and

surround left speakers.

Sur R Adjusts the balance between the surround left and

surround right speakers.

Sur Back Adjusts the balance between the surround left

and surround back speakers.

Subwoofer Adjusts the balance between the front left

speaker and the subwoofer.

y

You can also make test tone setting adjustments by pressing

TEST on the remote control.

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is in the standby mode.

However, if the power cord is disconnected from the

AC outlet, or the power supply is cut for more than one

week, the stored data will be lost. If so, adjust the

items again.

01EN.00_RX-SL100RDS.book Page 18 Thursday, November 27, 2003 12:42 PM

Pagina se încarcă ...

Yamaha RX-SL100 Manualul proprietarului

Yamaha RX-SL100 Manualul proprietarului

în alte limbi

Lucrări conexe