Philips 40PFA4500/98 Manual de utilizare

Marca: Philips

Model: 40PFA4500/98

Categorie: Televizoare LCD

Tip: Manual de utilizare

Acest manual este potrivit și pentru

www.philips.com/welcome

EN User manual

40PFA4500

50PFA4500

55PFA4500

1EN

English

Contents

1 Caution 2

2 Important 3

Safety 3

3 Your TV 5

Control Panel 5

Remote Control 5

Remote control usage 6

4 Use your TV 7

Switch TV on or off 7

Switch channels 7

Watch connected devices 8

Adjust TV volume 8

5 Other uses of the TV 9

Accessing the TV menu 9

Change the picture and sound setup 9

Settings 10

Use timer 11

Adjusting VGA Setup 12

Playing media from USB devices 12

Updating the TV software 13

Restoring the factory setup 13

6 Setting up channels 15

Setting up channels automatically 15

Setting channels manually 15

Renaming channels 15

7 TV connections 16

Rear connections 16

Side connections 17

Connecting to a computer 18

Use Philips EasyLink 19

8 Product information 20

Display resolutions 20

Multimedia 20

Audio Output Power 20

Inherent resolution 20

Tuner / Reception / Transmission 20

Remote Control 20

Power Supply 20

Supported TV mounts 21

9 Troubleshooting 22

General issues 22

Channel issues 22

Picture issues 22

Sound issues 23

HDMI connection issues 23

Computer connection issues 23

Warranty 25

2 EN

Mains fuse (/56)

This TV is tted with an approved moulded

plug. Should it become necessary to replace

the mains fuse, this must be replaced with a

fuse of the same value as indicated on the plug

(example 10A).

1 Remove fuse cover and fuse.

2 The replacement fuse must comply with BS

1362 and have the ASTA approval mark. If

the fuse is lost, contact your dealer in order

to verify the correct type.

3 Ret the fuse cover.

Kensington and Micro Saver are registered US

trademarks of ACCO World corporation with

issued registrations and pending applications in

other countries throughout the world.

HDMI, the HDMI logo and High-Denition

Multimedia Interface are trademarks or

registered trademarks of HDMI licensing LLC in

the United States and other countries.

All other registered and unregistered trademarks

are the property of their respective owners.

This product is manufactured under license from

Dolby Laboratories. Dolby and the double-D

symbol are registered trademarks of Dolby

Laboratories.

MHL

MHL, Mobile High-Denition Link and the MHL

Logo are trademarks or registered trademarks

of the MHL, LLC.

1 Caution

2015© TP Vision Europe B.V. All rights

reserved. Specifcations are subject to change

without notice. Trademarks are the property

of Koninklijke Philips N.V or their respective

owners. TP Vision Europe B.V. reserves the right

to change products at any time without being

obliged to adjust earlier supplies accordingly.

The material in this manual is believed adequate

for the intended use of the system. If the

product, or its individual modules or procedures,

are used for purposes other than those specied

herein, conrmation of their validity and

suitability must be obtained. TP Vision Europe

B.V. warrants that the material itself does not

infringe any United States patents. No further

warranty is expressed or implied.

TP Vision Europe B.V. cannot be held responsible

neither for any errors in the content of this

document nor for any problems as a result of

the content in this document. Errors reported

to Philips will be adapted and published on the

Philips support website as soon as possible.

Terms of warranty

• Risk of injury, damage to TV or void of

warranty! Do not attempt to repair the TV

yourself.

• Use the TV and accessories only as

intended by the manufacturer.

• The caution sign printed on the back of the

TV indicates risk of electric shock. Never

remove the TV cover. Always contact Philips

Customer Support for service or repairs.

• Any operation expressly prohibited in

this manual, or any adjustments and

assembly procedures not recommended

or authorised in this manual shall void the

warranty.

Pixel characteristics

This LCD/LED product has a high number of

color pixels. Although it has effective pixels of

99.999% or more, black dots or bright points of

light (red, green or blue) may appear constantly

on the screen. This is a structural property of the

display (within common industry standards) and

is not a malfunction.

3EN

English

Risk of injury or damage to the TV!

• Two people are required to lift and carry a

TV that weighs more than 25 kg or 55 lbs.

• When stand mounting the TV, use only the

supplied stand. Secure the stand to the TV

tightly. Place the TV on a at, level surface

that can support the combined weight of

the TV and the stand.

• When wall mounting the TV, use only a wall

mount that can support the weight of the

TV. Secure the wall mount to a wall that

can support the combined weight of the

TV and wall mount. TP Vision Europe B.V.

bears no responsibility for improper wall

mounting that results in accident, injury or

damage.

• If you need to store the TV, disassemble the

stand from the TV. Never lay the TV on its

back with the stand installed.

• Before you connect the TV to the power

outlet, ensure that the power voltage

matches the value printed on the back of

the TV. Never connect the TV to the power

outlet if the voltage is different.

• Parts of this product may be made of

glass. Handle with care to avoid injury and

damage.

Risk of injury to children!

Follow these precautions to prevent the TV

from toppling over and causing injury to children:

• Never place the TV on a surface covered

by a cloth or other material that can be

pulled away.

• Ensure that no part of the TV hangs over

the edge of the surface.

• Never place the TV on tall furniture (such

as a bookcase) without anchoring both the

furniture and TV to the wall or a suitable

support.

• Educate children about the dangers of

climbing on furniture to reach the TV.

Risk of swallowing batteries!

• The product/remote control may contain a

coin-type battery, which can be swallowed.

Keep the battery out of reach of children

at all times!

2 Important

Read and understand all instructions before you

use your TV. If damage is caused by failure to

follow instructions, the warranty does not apply.

Safety

Risk of electric shock or re!

• Never expose the TV to rain or water.

Never place liquid containers, such as

vases, near the TV. If liquids are spilt on or

into the TV, disconnect the TV from the

power outlet immediately. Contact Philips

Consumer Care to have the TV checked

before use.

• Never place the TV, remote control or

batteries near naked ames or other heat

sources, including direct sunlight.

To prevent the spread of re, keep candles

or other ames away from the TV, remote

control and batteries at all times.

• Never insert objects into the ventilation

slots or other openings on the TV.

• When the TV is swivelled ensure that no

strain is exerted on the power cord. Strain

on the power cord can loosen connections

and cause arcing.

• To disconnect the TV from the mains

power, the power plug of the TV must be

disconnected. When disconnecting the

power, always pull the power plug, never

the cord. Ensure that you have full access

to the power plug, power cord and outlet

socket at all times.

Risk of short circuit or re!

• Never expose the remote control or

batteries to rain, water or excessive heat.

• Avoid force coming onto power plugs.

Loose power plugs can cause arcing or re.

4 EN

of the image. Avoid using this mode for

extended periods of time.

•

Displaying stationary images from video

games or computers for an extended

period of time may result in partial after-

images and the appearance of ghost images

caused by screen burn. Reduce screen

brightness and contrast accordingly when

using the TV in this way.

Ghost images, partial after-images, and other

traces that appear on the TV screen as a result

of the above are not covered by the warranty.

Recycling

Your product is designed and manufactured with

high quality materials and components, which

can be recycled and reused.

When this crossed-out wheeled bin symbol is

attached to a product it means that the product

is covered by the European Directive 2002/96/

EC. Please inform yourself about the local

separate collection system for electrical and

electronic products.

Please act according to your local rules and

do not dispose of your old products with your

normal household waste.

Correct disposal of your old product helps to

prevent potential negative consequences for the

environment and human health.

Your product contains batteries covered by the

European Directive 2006/66/EC, which cannot

be disposed of with normal household waste.

Please inform yourself about the local rules on

separate collection of batteries because correct

disposal helps to prevent negative consequences

for the environment and human health.

Risk of overheating!

• Never install the TV in a conned space.

Always leave a space of at least 4 inches or

10 cm around the TV for ventilation. Ensure

curtains or other objects never cover the

ventilation slots on the TV.

Risk of injury, re or power cord damage!

• Never place the TV or any objects on the

power cord.

• Disconnect the TV from the power outlet

and antenna before lightning storms. During

lightning storms, never touch any part of

the TV, power cord or antenna cable.

Risk of hearing damage!

• Avoid using earphones or headphones at high

volumes or for prolonged periods of time.

Low temperatures

• If the TV is transported in temperatures

below 5°C or 41°F, unpack the TV and wait

until the TV temperature matches room

temperature before connecting the TV to

the power outlet.

Screen care

• Avoid stationary images as much as

possible. Stationary images are images that

remain on-screen for extended periods

of time. Example: on-screen menus, black

bars and time displays. If you must use

stationary images, reduce screen contrast

and brightness to avoid screen damage.

• Unplug the TV before cleaning.

• Clean the TV and frame with a soft, damp

cloth. Never use substances such as alcohol,

chemicals or household cleaners on the TV.

• Risk of damage to the TV screen! Never

touch, push, rub or strike the screen with

any object.

• To avoid deformations and color fading,

wipe off water drops as soon as possible.

Note

Stationary images may result in permanent

damage to the TV screen.

•

Do not display stationary images on the

LCD screen for more than two hours as

this may result in ghost images. To prevent

this, reduce screen brightness and contrast.

•

Viewing programs in the 4:3 format for

extended periods of time may leave

different traces on the left and right edges

of the screen as well as along the borders

5EN

English

Remote Control

SETUP

SOURCES EXIT

LISTBACK

FORMAT

OPTIONS

INFO

a (Standby)

Switch the TV on or to standby.

b Play buttons

Control video, music or text.

c FORMAT

Change picture format.

d (Home)

Access or exit from the main menu and

return to the previous menu.

3 Your TV

Congratulations on your purchase, and welcome

to Philips! To fully benet from the support that

Philips offers, register your TV at www.philips.

com/welcome.

Control Panel

a Volume-: Without the key menu, the

volume-down function is available.

b Volume+: Without the key menu, the

volume-up function is available.

c Channel+: When there is no keyboard

menu, switch to the next channel function;

when the keyboard menu appears, move

up and down the appropriate options.

d Channel-: When there is no keyboard

menu, switch to the prior channel function;

when the keyboard menu appears, move

up and down the appropriate options.

e Signal source/OK: In standby, the signal

source/OK key is used as a power key.

Press this key to boot.

After booting, the signal source/OK key

is used to open the keyboard menu

functions. When the keyboard menu is

open, the signal source/OK key is used as a

conrmation key.

Note: The signal source/OK key has no

function in USB mode

6 EN

Remote control usage

When you use the remote control, hold it close

to the TV and point it at the remote control

sensor. Make sure that the line-of-sight between

the remote control and TV is not blocked by

furniture, walls or other objects.

EXIT

Switches to TV.

f OPTIONS

Access options for channels in the TV

mode.

g (Navigation buttons)

Navigate through menus and select items.

h OK

Conrm an entry or selection.

i LIST

Access or exit from the TV channel list.

j CH +/- (Channel +/-)

Changes channels; scrolls up/down through

the options in USB mode.

k (Mute)

Mute or restore audio.

l 0-9 (Numeric buttons)

Select channel.

m TEXT

Enable or disable teletext.

n SUBTITLE

Selects subtitles.

o +/- (Volume)

Adjust volume.

p (Back)

Return to the previous menu or exit from a

certain function , and switch to the previous

channel or signal source.

q INFO

Display information about current activity.

r Color buttons

Select tasks or options.

s SOURCE

Select connected devices

SETUP

Accesses TV setup menu.

TV GUIDE

Accesses or exits the TV channels list.

Red

The red key has no function

7EN

English

Switch channels

• Press CH +/- on the remote control or the

lower right part of the TV.

• Enter a channel number using the numeric

buttons on the remote control.

• Press on the remote control to switch

and return to the previous channel.

View installed channel

You can view all available channels on the

channel list.

LIST

1 Press LIST.

» The channel list appears.

2 Press to select a channel and browse

the channel list.

3 Press OK to watch the selected channel.

4 Press to switch to and resume the last

watched channel.

4 Use your TV

This section helps you perform basic TV

operations.

Switch TV on or off

Standby indicator

To switch on

• Plug in the power plug.

» If the standby indicator is red, press

(Standby-On) on the remote control.

To switch to standby

• Press (Standby-On) on the remote

control.

» The standby indicator switches to red.

Tip

• Though your TV consumes very little power when in

standby mode, energy continues to be consumed. When

not in use for an extended period of time, disconnect the

TV power cable from the power outlet.

8 EN

Adjust TV volume

To increase or decrease volume

• Press VOL +/-at the lower right part of

the TV or the Volume Control+/- on the

remote control.

To mute or unmute sound

• Press (Mute).

• Press again to restore the sound.

Watch connected devices

Note

• Switch on the device before selecting it as an external

signal source.

Use the Source button

SOURCES

1 Press SOURCE.

» The source list appears.

2 Press

to select a device.

3 Press OK to select.

» The TV switches to the selected device.

9EN

English

2 Press Selecting/adjusting setup:

• [Smart picture]:

• [Standard]: Normal picture

setup. Recommended for home

entertainment use.

• [Eco]: Decreases the intensity of

the backlight to reduce power

consumption.

• [Vivid]: Increases the contrast and

sharpness of the picture.

• [Movie]: Applies setup for watching

movies, which works best in a theater

environment.

• [Personal]: Users can dene custom

setup here.

• [Brightness]: Adjusts the intensity and

detail of dark areas (adjustments made can

only be saved in personal setup).

• [Video contrast]: Adjusts the intensity

and detail of bright areas, with dark areas

remaining unchanged (adjustments made

can only be saved in personal setup).

• [Color]: Adjusts the color saturation

(adjustments made can only be saved in

personal setup).

• [Tint]: Adjusts the level of green (this

option only appears when using the NTSC

standard).

• [Sharpness]: Adjusts the sharpness of the

image (adjustments made can only be

saved in personal setup).

• [Color Temperature]:

• [Cool]: Bluish white tint.

• [Normal]: White tint. Users can

personalize the white tint inPCmode.

• [Warm]: Reddish white tint.

• [Advanced control]:

• [Noise Reduction]: Filters and

eliminates signal noise within the image.

• [Backlight]: Adjusts the screen

brightness (when the backlight

brightness is set to a low value, a

momentary white icker may be visible

when turning on the unit. This is normal.

When [Dynamic Backlight] is turned on,

this function will be hidden).

• [Dynamic Contrast]: Sets the contrast

to maximum. (There are no advanced

contrast functions in PC mode.)

5 Other uses of

the TV

Accessing the TV menu

The menu can help you to set up channels,

change the picture and sound setup, and access

other functions.

1 Press (Home) .

» Display menu screen.

Watch TV Source

Setup

USB

2 Select [Setup].

3 Press Choose from the following

options:

• [Picture] / [Sound] / [TV] (available

only in TV mode) / [Settings] /

[Parental] / [VGA Setting] (available

only in PC mode) / [EasyLink].

4 Press OK to select.

5 Press (Home) to go back.

Change the picture and sound

setup

Change the picture and sound setup to suit your

preferences. You can either use the presets or

manually change the setup.

Adjusting the picture setup

Press

(Home), then select Setup to

enter the setup menu and select

[

Picture]

Displays the [Picture] menu.

10 EN

Settings

1 Press

(Home),

then select Setup

to enter the setup menu and select

[Settings]

Displays [Settings] menu.

Press Select and adjust the setup:

• [Menu language]: Changes the TV’s

language setup.

• [Picture Format]: The majority of

signals use 16:9, 4:3, Zoom 1 and

Zoom 2 formats; HDMI signal sources

use 16:9, 4:3, Point to Point, zoom

1 and zoom 2 formats; VGA signal

sources on PCs use 16:9, 4:3 and Point

to Point formats.

• [Menu Timeout]: Sets the duration for

which the menu is displayed.

• [Menu Transparency]: Sets the level of

transparency for the menu.

• [Blue Screen]: Sets the screen color for

when the TV is not receiving a signal

(when the TV signal is not functioning).

• [Auto Sleep]: Sets the duration for

which the TV remains idle before it

automatically enters standby mode.

(Not applicable in PC mode).

• [Sleep Timer]: (Sleep Timer): Sets the

duration before the TV automatically

enters standby mode. Options:

Off/10/20/30/60/90/180 minutes.

• [Power On Status]: Sets the TV’s status

when it is connected to an AC power

supply.

• [Freeze Switch]: Turns on or off the

option to freeze the picture when

changing channels.

• [TTX Language]: Sets the TTX

language (only available in TV mode).

• [Color System]: Sets the AV color

system. (Only displayed in AV mode)

• [HDMI]: Sets the HDMI mode. (Only

displayed in 480p/576p/720p/1080p

HDMI modes. PC mode is

recommended when connecting a PC.)

• [Reset]: Restores the default setup.

(Excluding password setup and channel

information)

• [Dynamic Backlight]: The contrast level

will change with the brightness of the

image.

Note

•

The options may vary for different signal sources.

Adjusting the sound setup

1 Press

(Home), then select Setup to

enter the setup menu and select

[Sound].

Displays [Sound] menu.

2 Press Select and adjust the setup:

• [Smart Sound]:

• [Standard]: Gives balanced,

outstanding sound performance

in the treble, mid and bass ranges.

• [Music]: Enhances treble and bass,

delivering bright, clear and pure

sound quality when listening to

piano or orchestral instrument

performances.

• [Movie]: Enhance sound quality

of movies to enjoy a cinema-like

effects at home.

• [Personal]: Provides user

customization functions in order

to optimize all sound effect

parameters and achieve the best

experience.

• [Balance]: Adjusts the balance of the

left and right speakers.

• [Bass]: Adjusts the bass level

(adjustments made can only be saved

in personal setup).

• [Treble]: Adjusts the treble level

(adjustments made can only be saved

in personal setup).

• [Virtual surround]: Turns virtual

surround sound on: Turn on or off.

• [SPDIF Mode]: Selects the SPDIF

output mode.

• [AVL]: Turns automatic volume

adjustment on.

11EN

English

Use timer

You can set the timer to switch the TV to

standby mode at a set time.

Tip

• Before using the timer, please set the sleep timer.

Setting the sleep timer

Tip

• You can turn the TV off earlier, or reset the sleep timer

before the TV switches off.

Press (Home), then select Setup to

enter the setup menu and select

[Settings].

2 Press to Select [Sleep Timer].

3 Press You can select a time for the

sleep timer to turn the TV off.

» The longest time that can be set for

the sleep timer is 180 minutes.

TV lock

By locking the TV remote control, you can

prohibit children from watching specic

programs or channels.

Setting or changing your password

Press

(Home)

then select Setup to

enter the setup menu and select

[Parental].

2 Use the number buttons on the remote

control to enter a password.

3 Select (Change Password) and follow the

instructions on screen.

Locking channels

Press (Home), then select Setup to

enter the setup menu and select

[Parental].

2 Enter the password and select [Channel

Lock].

Changing picture format

1 Press (Home), then select Setup to

enter the setup menu and select [Settings].

2 Press to select [Picture Format].

3 Select a picture format.

4 Press OK to conrm.

Summary of picture formats

Conguration of the picture setup listed below.

Notes

• Some picture setups may be unavailable due to

differences between picture signal formats.

[16:9]: Change the normal

ratio to widescreen format.

[4:3]: The normal format.

[Zoom 1]: Horizontal

scaling of the widescreen

picture format. When this

format is used, the two

edges of the picture frame

will be partly cut off.

[Zoom 2]: Set the normal

ratio to widescreen format.

(Only 16:9, 4:3, and Point

to Point are available in PC

mode).

[Point to Point]: Used for

HDMI connections on PCs.

Will display the PC's full

screen in order to achieve

the best display effect.

12 EN

Playing media from USB devices

If you have photos, music or video les stored

on a USB storage device, you can play the les

on your TV.

• Supported storage devices: USB (only

FAT or FAT 32 USB storage devices are

supported)

• Supported media le formats:

• Images: JPEG

• Audio: MP3

• Video: MPEG 2/MPEG 4, H.264

• Text les: TXT

Note

• TP Vision shall not be liable if a USB storage device is not

supported, or if the data in the device is damaged or lost.

Viewing pictures and playing audio,

text and video les

1 Tu r n on the TV.

2 Connect the USB storage device to the

USB port on the side of the TV.

3 Press (Home).

4 Select [USB] and press OK.

» The USB browser will open.

Viewing photos

1 In the USB browser, select [Photo] and

press OK.

2 Select a photo then press OK. The photo

will be enlarged to ll the screen.

• Press CH- or CH+ to see the previous

or next photo.

Starting slide shows

1 Select a photo or folder, then press OK.

The photo will be enlarged to ll the

screen.

» The slide show starts playing from the

selected photo.

3 Choose a channel. Press OK to lock or unlock

the channel.

4 Repeat this step to lock or unlock multiple

channels.

• [Channel Lock]: When channels are

locked:

• A four-digit password is required to

enter the channel search menu.

• You need to enter the four digit

password to watch locked channels.

• You need to enter the four digit

password to enter the parental menu.

• [Clear All]: This function will clear all the

locked channels and signal sources that you

have previously saved.

• The default password is “0000”.

Users may change or set the

password themselves.

Notes

• If you visit a locked channel, you will be prompted to

enter the password.

Adjusting VGA Setup

1 Press

(Home)

then select Setup to enter

the setup menu and select

[VGA setting].

» The [VGA setting] menu will be displayed.

2 Press Select and adjust the setup:

• [Auto adjust]: Automatically adjusts the TV

to synchronize its resolution with that of

the PC, so that programs are displayed in

full screen.

• [H.Position]: Adjusts the horizontal

position.

• [V.Position]: Adjusts the vertical position.

• [Phase]: Adjusts the phase frequency of the

VGA signal.

• [Clock]: Adjusts the clock frequency of the

VGA signal.

Tip

• The VGA menu is only visible when connected to a PC.

13EN

English

• [Size]: Display size of video (no option

available).

• [Close]: Close menu.

Viewing documents

1 In the USB browser, select [Text], then

press OK.

2 Press OK to read the text le.

3 Use the following buttons to control text

le playback:

• or : Play or pause

• : Search forward or backward.

4 Press INFO button to display text size.

Removing USB storage devices

Note

• In order to avoid damaging the USB storage device,

please follow the steps below.

1 Press (Back) repeatedly to exit the USB

browser.

2 Wait for approximately ve minutes before

removing the USB storage device.

Updating the TV software

Philips constantly strives to improve its products,

so we recommend that you update your

TV software whenever an update becomes

available. Please visit the website at

www.philips.com/support to nd out whether

there are updates available.

Restoring the factory setup

You can restore your TV’s default picture and

sound setup. Saved channel setup will not be

affected.

2 Press the following buttons to control

photo playback:

• or : Play or pause

• CH- or CH+: See the last photo or the

next photo.

3 Press the INFO button for graphic display

of basic information

Listening to music

1 In the USB browser, select [Music] and

press OK.

2 Select a song or album, then press OK to

start playing.

3 Use the following buttons to control music:

• or : Play or pause

• : Adjust Smart sound

Watching video

1 In the USB browser, select [Movie], then

press OK.

2 Press OK to play the video.

3 Use the following buttons to control the

movie:

• or : Play or pause

• : Search forward or backward.

Change video setting

When playing a video, press INFO for the

setting menu, press , then choose

the relevant setting and make adjustments

accordingly:

• [Smart picture]: Setting the playbaqck

mode of the screen.

• [Smart sound]: Setting the playback

mode of the sound.

• [Sound track]: Adjust sound track

(adjustments cannot be made without

sound track).

• [Subtitles]: Adjust subtitle (adjustments

cannot be made without subtitles).

• [Resolution]: Display video resolution

(no option available).

14 EN

1 Press

(Home)

and select Setup to enter the

setup menu

2 Press to Select [Settings] > [Reset].

3 Select [Conrm] and press OK. If you want to

cancel, please select [Cancel] and press OK.

15EN

English

Deleting channels

1 Press

(Home)

and select Setup to enter

the setup menu.

2 Press Select [TV] > [Channels]

> [Channel Edit].

» The [Channel Edit] menu will be

displayed.

3 Press Select the channel you wish to

delete, then press the red button.

Skipping channels

Press

(Home)

and select Setup to enter

the setup menu.

2 Press Select [TV] > [Channels]

> [Channel Edit].

» The [Channel Edit] menu will be

displayed.

3 Press Select the channel you wish to

skip, then press the blue button.

Renaming channels

You can rename channels. Selecting a channel

will display its name.

1 Press

(Home)

and select Setup to enter

the setup menu.

2 Press Select [TV] > [Channels]

> [Channel Edit].

» The [Channel Edit] menu will be

displayed.

3 Press to select the channel to be

renamed, then press the green button.

4 Press to select characters.

5 Press the green button to nish renaming

the channel.

Tip

• Channel names can include a maximum of 6 characters.

6 Setting up

channels

This chapter explains how to recongure and

ne-tune channels.

Setting up channels

automatically

Automatically nds and saves channels.

1 Press

(Home)

and select Setup to enter

the setup menu.

2 Press Select [TV] > [Channels]

> [Channel Scan].

3 Press OK.

» The TV will automatically start

searching for channels.

Setting channels manually

You can manually nd and save analog TV

channels.

Finding and saving new TV channels

1 Press

(Home)

and select Setup to enter

the setup menu.

2 Press to Select [TV] >

[Channels] > [Manual Search].

» Show [Manual Search] menu.

3 Select (Search) and use the number keys to

enter the frequency.

4 Select (Search) and press the key to

begin channel search.

5 Press (Home) Exit.

16 EN

VideoL R

Y / AV Pb Pr LR

c Antenna/ cable TV

Input for an antenna, cable or satellite signal.

ANTENNA

d PC inputs (VGA and audio)

VGA AUDIO

e SPDIF

7 TV connections

This chapter explains how to connect devices with

different interfaces.

Note

• You can use different connection types to connect

devices to the TV.

Rear connections

a Component signal input

Audio and video input from DVD players,

game consoles and other analog or digital

devices

Y / AV Pb Pr LR

b AV input

17EN

English

Note

•

MHL is unable to support 100% of all mobile devices.

b USB

Data input from a USB storage device.

Transmit sound to digital audio signal, then

connected audio device can play digital

audio sound.

SPDIF

f Headphones

Stereo sound output for headphones.

Note

• The TV speakers will automatically be muted when

headphones are plugged in.

•

The earphone jack is only used as a low-power audio

output. Please do not connect high-power devices that are

AC-powered (e.g., AC-powered, high-power speakers, etc.).

Side connections

a HDMI 1 (ARC) /HDMI 2 (MHL) /HDMI 3

Digital audio and video input from Blu-ray

players and other high denition devices

18 EN

AUDIO

• HDMI cable and HDMI-DVI adapter

AUDIO

• VGA cable

VGA

AUDIO

Connecting to a computer

Before connecting the computer to the TV:

• Set the computer screen refresh rate to 60Hz.

• Select a supported resolution on the computer.

Connect to the computer using one of the following

connections:

Notes

• A separate audio cable is required when connecting with

DVI or VGA.

• HDMI cable

Set the computer display resolution to

480p/576p/720p/1080p

Press

(Home) and select Setup to enter

the setup menu

3 Press to select [

Settings] >

(HDMIMode) and set the HDMI Screen Mode

to PC or video.

Adjust picture format for the best display

effect.

•

Press

(Home)

and select Setup to

enter the setup menu.

•

Press Select [Settings

]

[Picture Format].

•

Select a picture format.

•

Press OK to conﬁrm

• DVI-HDMI cable

Pagina se încarcă ...

Philips 40PFA4500/98 Manual de utilizare

Marca: Philips

Model: 40PFA4500/98

Categorie: Televizoare LCD

Tip: Manual de utilizare

Acest manual este potrivit și pentru

Descărcați PDF

raport

în alte limbi

English: Philips 40PFA4500/98 User manual
italiano: Philips 40PFA4500/98 Manuale utente

Philips 40PFA4500/98 Manual de utilizare

Acest manual este potrivit și pentru

Philips 40PFA4500/98 Manual de utilizare

în alte limbi

Alte documente