Yamaha S70 Manualul proprietarului

S70
Yamaha
Marca
Yamaha
Model
S70
Tip
Manualul proprietarului

Acest manual este potrivit și pentru

S90 XS/S70 XS Remote Tools Installation Guide 1
ATTENTION
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY
PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS
BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).
BY Downloading, installing, copying, or otherwise using this software YOU ARE AGREEING to BE BOUND BY THE TERMS OF THIS LICENSE.
If you do not agree with the terms, do not download, install, copy, or otherwise use this software. if you have downloaded or installed THE
SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use one copy of the software program(s) and data (“SOFTWARE”) accompanying this Agreement. The
term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha’s
licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data
created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
• You may use the SOFTWARE on a single computer.
• You m ay make one copy of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is on media where
such backup copy is permitted. On the backup copy, you must reproduce Yamaha’s copyright notice and any other proprietary legends
that were on the original copy of the SOFTWARE.
• You m ay permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the
recipient reads and agrees to the terms of this Agreement.
2. RESTRICTIONS
• You m ay n o t engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE
by any method whatsoever.
• You m ay n o t reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the
SOFTWARE.
• You m ay n o t electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other
computers.
• You m ay n o t use the SOFTWARE to distribute illegal data or data that violates public policy.
• You m ay n o t initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following
restrictions which you must observe.
• Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
• Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners
in public without permission of the copyright owner.
• The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified
without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or
provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such
termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided
“AS IS” and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY
DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.
SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED.
SOFTWARE LICENSE AGREEMENT
S90 XS/S70 XS Remote Tools
Installation Guide
S90 XS/S70 XS Remote Tools
Installation Guide
S90 XS/S70 XS Remote Tools Installation Guide 2
5. LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT
SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF
THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha’s total liability to you for all damages, losses and causes of action (whether in
contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
6. THIRD PARTY SOFTWARE
Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the SOFTWARE. If, in the written materials or the electronic data
accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must
abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY
SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any
way for the THIRD PARTY SOFTWARE or your use thereof.
• Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
• Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
• Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or
consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD
PARTY SOFTWARE.
7. G E N E R A L
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute
or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this
Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.
8. COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written
materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this
Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of
Yamaha.
• The software and this Installation Guide are the exclusive copyrights of Yamaha Corporation.
• Please read carefully the Software Licensing Agreement at the front of this Installation Guide before installing the application.
• Copying of the software or reproduction of this Installation Guide in whole or in part by any means is expressly forbidden without the written
consent of the manufacturer.
• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for
the results of the use of this Installation Guide and the software.
• Future upgrades of application and system software and any changes in specifications and functions will be announced at the following
website.
http://www.yamahasynth.com/download/
• The screen displays as illustrated in this Installation Guide are for instructional purposes, and may appear somewhat different from the
screens which appear on your computer.
• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for
your personal use.
• Windows is a registered trademark of Microsoft
®
Corporation in the United States and other countries.
• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
• Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.
• The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies.
Special Notices
S90 XS/S70 XS Remote Tools Installation Guide 3
S90 XS/S70 XS Remote Tools consists of two software components: S90 XS/S70 XS Remote Editor and S90 XS/S70
XS Extension. S90 XS/S70 XS Remote Editor is software which lets you edit/create Control Templates for the S90
XS/S70 XS Music Synthesizer. S90 XS/S70 XS Extension is software component that enables you to use the S90 XS/
S70 XS along with Cubase 4.5, Cubase Studio 4.5, Cubase Essential 4.5 or Cubase AI 4.5. The S90 XS/S70 XS
Remote Tools Installer installs these two software components.
Windows
S90 XS/S70 XS Remote Editor
Windows XP
Windows Vista
S90 XS/S70 XS Extension
The system requirements of S90 XS/S70 XS Extension are the same as Cubase / Cubase Studio / Cubase Essential
/ Cubase AI version 4.5.2 or later.
Macintosh
S90 XS/S70 XS Remote Editor
S90 XS/S70 XS Extension
The system requirements of S90 XS/S70 XS Extension are the same as Cubase / Cubase Studio / Cubase Essential
/ Cubase AI version 4.5.2 or later.
About S90 XS/S70 XS Remote Tools
Minimum System Requirements
OS:
Windows XP Professional SP3 or later/Home Edition SP3 or later
CPU:
1GHz or higher; Intel Pentium/Celeron/Core processor
Available Memory:
256MB or more
Hard Disk:
50MB or more
Other:
USB 1.1 or USB 2.0 interface
OS:
Windows Vista SP1 or later
CPU:
(32-bit OS) 1GHz or higher, Intel Pentium/Celeron/Core processor
(64-bit OS) Intel 64 compatible, Intel Pentium/Celeron/Core processor
Available Memory:
512MB or more
Hard Disk:
50MB or more
Other:
USB 1.1 or USB 2.0 interface
OS:
Mac OS X 10.4 or later
CPU:
G4 450 MHz or higher/Intel CPU
Available Memory:
256MB or more
Hard Disk:
50MB or more
Other:
USB 1.1 or USB 2.0 interface
NOTE
Keep in mind that the software is often updated and the system requirements are subject to change. You can check
the latest version information of each program and its system requirements at the following website:
http://www.yamahasynth.com/
The system requirements may differ slightly depending on the particular computer.
S90 XS/S70 XS Remote Tools Installation Guide 4
To use the S90 XS/S70 XS Remote Tools, you will need to install additional applications, as described below.
1 Install a DAW software, such as Cubase.
2 Install an appropriate USB-MIDI Driver.
Download the latest driver from our website:
http://www.global.yamaha.com/download/usb_midi/
3 Install the S90 XS/S70 XS Remote Tools.
Refer to “Installing the S90 XS/S70 XS Remote Tools.”
Follow the instructions below to install the S90 XS/S70 XS Remote Tools programs.
Windows
1 After the downloaded compressed file is properly extracted, double-click the “setup.exe” file.
The S90 XS/S70 XS Remote Tools setup dialog appears.
2 Follow the on-screen instructions to install the software.
When the S90 XS/S70 XS Remote Tools and the other necessary software is installed, you can start the S90 XS/
S70 XS Remote Editor.
3 Start a Steinberg-made DAW software (such as Cubase), then quit it.
This operation is necessary to scan through the DAW software so that the S90 XS/S70 XS Remote Editor obtains
the VSTi related information.
Macintosh
1 After the downloaded compressed file is properly extracted, double-click the “Install S90 XS _
S70 XS Remote Tools.pkg” file.
The S90 XS/S70 XS Remote Tools setup dialog appears.
2 Follow the on-screen instructions to install the software.
When the S90 XS/S70 XS Remote Tools and the other necessary software is installed, you can start the S90 XS/
S70 XS Remote Editor.
3 Start a Steinberg-made DAW software (such as Cubase), then quit it.
This operation is necessary to scan through the DAW software so that the S90 XS/S70 XS Remote Editor obtains
the VSTi related information.
Software Installation
Installing the S90 XS/S70 XS Remote Tools
NOTE
When using Windows Vista, if the “User Account Control” window appears, click [Continue].
NOTE
Only DAW software produced by Steinberg (such as Cubase 4.5 compatible with S90 XS/S70 XS Remote
Tools
) can be scanned for obtaining the VSTi-related information.
NOTE
Only DAW software produced by Steinberg (such as Cubase 4.5 compatible with S90 XS/S70 XS Remote
Tools
) can be scanned for obtaining the VSTi-related information.
S90 XS/S70 XS Remote Tools Installation Guide 5
When using Windows XP
1 From the Start menu, select ([Settings] ) [Control Panel] [Add or Remove Programs] to
display the “Add or Remove Programs” panel.
2 Click “Change or Remove Programs” located in the upper left, then select “Yamaha S90 XS /
S70 XS Remote Tools” from the list in the right pane.
3 Click [Change/Remove].
A dialog box appears. Follow the instructions to remove the software.
When using Windows Vista
1 From the Start menu, select ([Settings] ) [Control Panel] [Programs and Features] to display
the “Uninstall or change a program” window.
2 Select “Yamaha S90 XS / S70 XS Remote Tools” from the list.
3 Click [Uninstall/Change].
If the “User Account Control” window appears, click [Continue].
A dialog box appears. Follow the instructions to remove the software.
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2009 Yamaha Corporation
905MW-A0
Windows Software Uninstall
(removing the Installed application)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Yamaha S70 Manualul proprietarului

S70
Yamaha
Marca
Yamaha
Model
S70
Tip
Manualul proprietarului
Acest manual este potrivit și pentru
Descărcați PDF
raport

în alte limbi

Lucrări conexe